In the Linux kernel, the following vulnerability has been resolved: ALSA: ad1816a: Fix potential NULL pointer deref in snd_card_ad1816a_pnp() Use pr_warn() instead of dev_warn() when 'pdev' is NULL to avoid a potential NULL pointer dereference.
In the Linux kernel, the following vulnerability has been resolved: ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe() devm_ioremap() returns NULL on error. Currently, pxa_ata_probe() does not check for this case, which can result in a NULL pointer dereference. Add NULL check after devm_ioremap() to prevent this issue.
In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms Commit 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses") introduced an access to the 'soc' field of struct mtk_pinctrl in mtk_eint_do_init() and for that an include of pinctrl-mtk-common-v2.h. However, pinctrl drivers relying on the v1 common driver include pinctrl-mtk-common.h instead, which provides another definition of struct mtk_pinctrl that does not contain an 'soc' field. Since mtk_eint_do_init() can be called both by v1 and v2 drivers, it will now try to dereference an invalid pointer when called on v1 platforms. This has been observed on Genio 350 EVK (MT8365), which crashes very early in boot (the kernel trace can only be seen with earlycon). In order to fix this, since 'struct mtk_pinctrl' was only needed to get a 'struct mtk_eint_pin', make 'struct mtk_eint_pin' a parameter of mtk_eint_do_init() so that callers need to supply it, removing mtk_eint_do_init()'s dependency on any particular 'struct mtk_pinctrl'.
In the Linux kernel, the following vulnerability has been resolved: misc: tps6594-pfsm: Add NULL pointer check in tps6594_pfsm_probe() The returned value, pfsm->miscdev.name, from devm_kasprintf() could be NULL. A pointer check is added to prevent potential NULL pointer dereference. This is similar to the fix in commit 3027e7b15b02 ("ice: Fix some null pointer dereference issues in ice_ptp.c"). This issue is found by our static analysis tool.
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Purge vif txq in ieee80211_do_stop() After ieee80211_do_stop() SKB from vif's txq could still be processed. Indeed another concurrent vif schedule_and_wake_txq call could cause those packets to be dequeued (see ieee80211_handle_wake_tx_queue()) without checking the sdata current state. Because vif.drv_priv is now cleared in this function, this could lead to driver crash. For example in ath12k, ahvif is store in vif.drv_priv. Thus if ath12k_mac_op_tx() is called after ieee80211_do_stop(), ahvif->ah can be NULL, leading the ath12k_warn(ahvif->ah,...) call in this function to trigger the NULL deref below. Unable to handle kernel paging request at virtual address dfffffc000000001 KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] batman_adv: bat0: Interface deactivated: brbh1337 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfffffc000000001] address between user and kernel address ranges Internal error: Oops: 0000000096000004 [#1] SMP CPU: 1 UID: 0 PID: 978 Comm: lbd Not tainted 6.13.0-g633f875b8f1e #114 Hardware name: HW (DT) pstate: 10000005 (nzcV daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] lr : ath12k_mac_op_tx+0x174/0x29b8 [ath12k] sp : ffffffc086ace450 x29: ffffffc086ace450 x28: 0000000000000000 x27: 1ffffff810d59ca4 x26: ffffff801d05f7c0 x25: 0000000000000000 x24: 000000004000001e x23: ffffff8009ce4926 x22: ffffff801f9c0800 x21: ffffff801d05f7f0 x20: ffffff8034a19f40 x19: 0000000000000000 x18: ffffff801f9c0958 x17: ffffff800bc0a504 x16: dfffffc000000000 x15: ffffffc086ace4f8 x14: ffffff801d05f83c x13: 0000000000000000 x12: ffffffb003a0bf03 x11: 0000000000000000 x10: ffffffb003a0bf02 x9 : ffffff8034a19f40 x8 : ffffff801d05f818 x7 : 1ffffff0069433dc x6 : ffffff8034a19ee0 x5 : ffffff801d05f7f0 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000008 Call trace: ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] (P) ieee80211_handle_wake_tx_queue+0x16c/0x260 ieee80211_queue_skb+0xeec/0x1d20 ieee80211_tx+0x200/0x2c8 ieee80211_xmit+0x22c/0x338 __ieee80211_subif_start_xmit+0x7e8/0xc60 ieee80211_subif_start_xmit+0xc4/0xee0 __ieee80211_subif_start_xmit_8023.isra.0+0x854/0x17a0 ieee80211_subif_start_xmit_8023+0x124/0x488 dev_hard_start_xmit+0x160/0x5a8 __dev_queue_xmit+0x6f8/0x3120 br_dev_queue_push_xmit+0x120/0x4a8 __br_forward+0xe4/0x2b0 deliver_clone+0x5c/0xd0 br_flood+0x398/0x580 br_dev_xmit+0x454/0x9f8 dev_hard_start_xmit+0x160/0x5a8 __dev_queue_xmit+0x6f8/0x3120 ip6_finish_output2+0xc28/0x1b60 __ip6_finish_output+0x38c/0x638 ip6_output+0x1b4/0x338 ip6_local_out+0x7c/0xa8 ip6_send_skb+0x7c/0x1b0 ip6_push_pending_frames+0x94/0xd0 rawv6_sendmsg+0x1a98/0x2898 inet_sendmsg+0x94/0xe0 __sys_sendto+0x1e4/0x308 __arm64_sys_sendto+0xc4/0x140 do_el0_svc+0x110/0x280 el0_svc+0x20/0x60 el0t_64_sync_handler+0x104/0x138 el0t_64_sync+0x154/0x158 To avoid that, empty vif's txq at ieee80211_do_stop() so no packet could be dequeued after ieee80211_do_stop() (new packets cannot be queued because SDATA_STATE_RUNNING is cleared at this point).
In the Linux kernel, the following vulnerability has been resolved: gve: add missing NULL check for gve_alloc_pending_packet() in TX DQO gve_alloc_pending_packet() can return NULL, but gve_tx_add_skb_dqo() did not check for this case before dereferencing the returned pointer. Add a missing NULL check to prevent a potential NULL pointer dereference when allocation fails. This improves robustness in low-memory scenarios.
In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: Add NULL check in uclogic_input_configured() devm_kasprintf() returns NULL when memory allocation fails. Currently, uclogic_input_configured() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.
In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop() devm_kasprintf() returns NULL when memory allocation fails. Currently, aspeed_lpc_enable_snoop() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue. [arj: Fix Fixes: tag to use subject from 3772e5da4454]
In the Linux kernel, the following vulnerability has been resolved: power: supply: cpcap-charger: Fix null check for power_supply_get_by_name In the cpcap_usb_detect() function, the power_supply_get_by_name() function may return `NULL` instead of an error pointer. To prevent potential null pointer dereferences, Added a null check.
In the Linux kernel, the following vulnerability has been resolved: net: ethernet: rtsn: Fix a null pointer dereference in rtsn_probe() Add check for the return value of rcar_gen4_ptp_alloc() to prevent potential null pointer dereference.
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: Fix null-ptr-deref in mt7925_thermal_init() devm_kasprintf() returns NULL on error. Currently, mt7925_thermal_init() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: handle hdr_first_de() return value The hdr_first_de() function returns a pointer to a struct NTFS_DE. This pointer may be NULL. To handle the NULL error effectively, it is important to implement an error handler. This will help manage potential errors consistently. Additionally, error handling for the return value already exists at other points where this function is called. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: i2c: cros-ec-tunnel: defer probe if parent EC is not present When i2c-cros-ec-tunnel and the EC driver are built-in, the EC parent device will not be found, leading to NULL pointer dereference. That can also be reproduced by unbinding the controller driver and then loading i2c-cros-ec-tunnel module (or binding the device). [ 271.991245] BUG: kernel NULL pointer dereference, address: 0000000000000058 [ 271.998215] #PF: supervisor read access in kernel mode [ 272.003351] #PF: error_code(0x0000) - not-present page [ 272.008485] PGD 0 P4D 0 [ 272.011022] Oops: Oops: 0000 [#1] SMP NOPTI [ 272.015207] CPU: 0 UID: 0 PID: 3859 Comm: insmod Tainted: G S 6.15.0-rc1-00004-g44722359ed83 #30 PREEMPT(full) 3c7fb39a552e7d949de2ad921a7d6588d3a4fdc5 [ 272.030312] Tainted: [S]=CPU_OUT_OF_SPEC [ 272.034233] Hardware name: HP Berknip/Berknip, BIOS Google_Berknip.13434.356.0 05/17/2021 [ 272.042400] RIP: 0010:ec_i2c_probe+0x2b/0x1c0 [i2c_cros_ec_tunnel] [ 272.048577] Code: 1f 44 00 00 41 57 41 56 41 55 41 54 53 48 83 ec 10 65 48 8b 05 06 a0 6c e7 48 89 44 24 08 4c 8d 7f 10 48 8b 47 50 4c 8b 60 78 <49> 83 7c 24 58 00 0f 84 2f 01 00 00 48 89 fb be 30 06 00 00 4c 9 [ 272.067317] RSP: 0018:ffffa32082a03940 EFLAGS: 00010282 [ 272.072541] RAX: ffff969580b6a810 RBX: ffff969580b68c10 RCX: 0000000000000000 [ 272.079672] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff969580b68c00 [ 272.086804] RBP: 00000000fffffdfb R08: 0000000000000000 R09: 0000000000000000 [ 272.093936] R10: 0000000000000000 R11: ffffffffc0600000 R12: 0000000000000000 [ 272.101067] R13: ffffffffa666fbb8 R14: ffffffffc05b5528 R15: ffff969580b68c10 [ 272.108198] FS: 00007b930906fc40(0000) GS:ffff969603149000(0000) knlGS:0000000000000000 [ 272.116282] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 272.122024] CR2: 0000000000000058 CR3: 000000012631c000 CR4: 00000000003506f0 [ 272.129155] Call Trace: [ 272.131606] <TASK> [ 272.133709] ? acpi_dev_pm_attach+0xdd/0x110 [ 272.137985] platform_probe+0x69/0xa0 [ 272.141652] really_probe+0x152/0x310 [ 272.145318] __driver_probe_device+0x77/0x110 [ 272.149678] driver_probe_device+0x1e/0x190 [ 272.153864] __driver_attach+0x10b/0x1e0 [ 272.157790] ? driver_attach+0x20/0x20 [ 272.161542] bus_for_each_dev+0x107/0x150 [ 272.165553] bus_add_driver+0x15d/0x270 [ 272.169392] driver_register+0x65/0x110 [ 272.173232] ? cleanup_module+0xa80/0xa80 [i2c_cros_ec_tunnel 3a00532f3f4af4a9eade753f86b0f8dd4e4e5698] [ 272.182617] do_one_initcall+0x110/0x350 [ 272.186543] ? security_kernfs_init_security+0x49/0xd0 [ 272.191682] ? __kernfs_new_node+0x1b9/0x240 [ 272.195954] ? security_kernfs_init_security+0x49/0xd0 [ 272.201093] ? __kernfs_new_node+0x1b9/0x240 [ 272.205365] ? kernfs_link_sibling+0x105/0x130 [ 272.209810] ? kernfs_next_descendant_post+0x1c/0xa0 [ 272.214773] ? kernfs_activate+0x57/0x70 [ 272.218699] ? kernfs_add_one+0x118/0x160 [ 272.222710] ? __kernfs_create_file+0x71/0xa0 [ 272.227069] ? sysfs_add_bin_file_mode_ns+0xd6/0x110 [ 272.232033] ? internal_create_group+0x453/0x4a0 [ 272.236651] ? __vunmap_range_noflush+0x214/0x2d0 [ 272.241355] ? __free_frozen_pages+0x1dc/0x420 [ 272.245799] ? free_vmap_area_noflush+0x10a/0x1c0 [ 272.250505] ? load_module+0x1509/0x16f0 [ 272.254431] do_init_module+0x60/0x230 [ 272.258181] __se_sys_finit_module+0x27a/0x370 [ 272.262627] do_syscall_64+0x6a/0xf0 [ 272.266206] ? do_syscall_64+0x76/0xf0 [ 272.269956] ? irqentry_exit_to_user_mode+0x79/0x90 [ 272.274836] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 272.279887] RIP: 0033:0x7b9309168d39 [ 272.283466] Code: 5b 41 5c 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d af 40 0c 00 f7 d8 64 89 01 8 [ 272.302210] RSP: 002b:00007fff50f1a288 EFLAGS: 00000246 ORIG_RAX: 000 ---truncated---
In the Linux kernel, the following vulnerability has been resolved: tty: serial: uartlite: register uart driver in init When two instances of uart devices are probing, a concurrency race can occur. If one thread calls uart_register_driver function, which first allocates and assigns memory to 'uart_state' member of uart_driver structure, the other instance can bypass uart driver registration and call ulite_assign. This calls uart_add_one_port, which expects the uart driver to be fully initialized. This leads to a kernel panic due to a null pointer dereference: [ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8 [ 8.156982] #PF: supervisor write access in kernel mode [ 8.156984] #PF: error_code(0x0002) - not-present page [ 8.156986] PGD 0 P4D 0 ... [ 8.180668] RIP: 0010:mutex_lock+0x19/0x30 [ 8.188624] Call Trace: [ 8.188629] ? __die_body.cold+0x1a/0x1f [ 8.195260] ? page_fault_oops+0x15c/0x290 [ 8.209183] ? __irq_resolve_mapping+0x47/0x80 [ 8.209187] ? exc_page_fault+0x64/0x140 [ 8.209190] ? asm_exc_page_fault+0x22/0x30 [ 8.209196] ? mutex_lock+0x19/0x30 [ 8.223116] uart_add_one_port+0x60/0x440 [ 8.223122] ? proc_tty_register_driver+0x43/0x50 [ 8.223126] ? tty_register_driver+0x1ca/0x1e0 [ 8.246250] ulite_probe+0x357/0x4b0 [uartlite] To prevent it, move uart driver registration in to init function. This will ensure that uart_driver is always registered when probe function is called.
In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations On Adva boards, SMA sysfs store/get operations can call __handle_signal_outputs() or __handle_signal_inputs() while the `irig` and `dcf` pointers are uninitialized, leading to a NULL pointer dereference in __handle_signal() and causing a kernel crash. Adva boards don't use `irig` or `dcf` functionality, so add Adva-specific callbacks `ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that avoid invoking `irig` or `dcf` input/output routines.
A NULL pointer dereference flaw was found in the Linux kernel’s IEEE 802.15.4 wireless networking subsystem in the way the user closes the LR-WPAN connection. This flaw allows a local user to crash the system. The highest threat from this vulnerability is to system availability.
In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash There is a code path in dequeue_entities() that can set the slice of a sched_entity to U64_MAX, which sometimes results in a crash. The offending case is when dequeue_entities() is called to dequeue a delayed group entity, and then the entity's parent's dequeue is delayed. In that case: 1. In the if (entity_is_task(se)) else block at the beginning of dequeue_entities(), slice is set to cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX. 2. The first for_each_sched_entity() loop dequeues the entity. 3. If the entity was its parent's only child, then the next iteration tries to dequeue the parent. 4. If the parent's dequeue needs to be delayed, then it breaks from the first for_each_sched_entity() loop _without updating slice_. 5. The second for_each_sched_entity() loop sets the parent's ->slice to the saved slice, which is still U64_MAX. This throws off subsequent calculations with potentially catastrophic results. A manifestation we saw in production was: 6. In update_entity_lag(), se->slice is used to calculate limit, which ends up as a huge negative number. 7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit is negative, vlag > limit, so se->vlag is set to the same huge negative number. 8. In place_entity(), se->vlag is scaled, which overflows and results in another huge (positive or negative) number. 9. The adjusted lag is subtracted from se->vruntime, which increases or decreases se->vruntime by a huge number. 10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which incorrectly returns false because the vruntime is so far from the other vruntimes on the queue, causing the (vruntime - cfs_rq->min_vruntime) * load calulation to overflow. 11. Nothing appears to be eligible, so pick_eevdf() returns NULL. 12. pick_next_entity() tries to dereference the return value of pick_eevdf() and crashes. Dumping the cfs_rq states from the core dumps with drgn showed tell-tale huge vruntime ranges and bogus vlag values, and I also traced se->slice being set to U64_MAX on live systems (which was usually "benign" since the rest of the runqueue needed to be in a particular state to crash). Fix it in dequeue_entities() by always setting slice from the first non-empty cfs_rq.
In the Linux kernel, the following vulnerability has been resolved: null_blk: fix poll request timeout handling When doing io_uring benchmark on /dev/nullb0, it's easy to crash the kernel if poll requests timeout triggered, as reported by David. [1] BUG: kernel NULL pointer dereference, address: 0000000000000008 Workqueue: kblockd blk_mq_timeout_work RIP: 0010:null_timeout_rq+0x4e/0x91 Call Trace: ? null_timeout_rq+0x4e/0x91 blk_mq_handle_expired+0x31/0x4b bt_iter+0x68/0x84 ? bt_tags_iter+0x81/0x81 __sbitmap_for_each_set.constprop.0+0xb0/0xf2 ? __blk_mq_complete_request_remote+0xf/0xf bt_for_each+0x46/0x64 ? __blk_mq_complete_request_remote+0xf/0xf ? percpu_ref_get_many+0xc/0x2a blk_mq_queue_tag_busy_iter+0x14d/0x18e blk_mq_timeout_work+0x95/0x127 process_one_work+0x185/0x263 worker_thread+0x1b5/0x227 This is indeed a race problem between null_timeout_rq() and null_poll(). null_poll() null_timeout_rq() spin_lock(&nq->poll_lock) list_splice_init(&nq->poll_list, &list) spin_unlock(&nq->poll_lock) while (!list_empty(&list)) req = list_first_entry() list_del_init() ... blk_mq_add_to_batch() // req->rq_next = NULL spin_lock(&nq->poll_lock) // rq->queuelist->next == NULL list_del_init(&rq->queuelist) spin_unlock(&nq->poll_lock) Fix these problems by setting requests state to MQ_RQ_COMPLETE under nq->poll_lock protection, in which null_timeout_rq() can safely detect this race and early return. Note this patch just fix the kernel panic when request timeout happen. [1] https://lore.kernel.org/all/3893581.1691785261@warthog.procyon.org.uk/
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix potential NULL pointer dereference Klocwork tool reported 'cur_dsd' may be dereferenced. Add fix to validate pointer before dereferencing the pointer.
In the Linux kernel, the following vulnerability has been resolved: soc: samsung: exynos-chipid: Add NULL pointer check in exynos_chipid_probe() soc_dev_attr->revision could be NULL, thus, a pointer check is added to prevent potential NULL pointer dereference. This is similar to the fix in commit 3027e7b15b02 ("ice: Fix some null pointer dereference issues in ice_ptp.c"). This issue is found by our static analysis tool.
In the Linux kernel, the following vulnerability has been resolved: dlm: prevent NPD when writing a positive value to event_done do_uevent returns the value written to event_done. In case it is a positive value, new_lockspace would undo all the work, and lockspace would not be set. __dlm_new_lockspace, however, would treat that positive value as a success due to commit 8511a2728ab8 ("dlm: fix use count with multiple joins"). Down the line, device_create_lockspace would pass that NULL lockspace to dlm_find_lockspace_local, leading to a NULL pointer dereference. Treating such positive values as successes prevents the problem. Given this has been broken for so long, this is unlikely to break userspace expectations.
In the Linux kernel, the following vulnerability has been resolved: media: dw2102: Fix null-ptr-deref in dw2102_i2c_transfer() In dw2102_i2c_transfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach dw2102_i2c_transfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 950e252cb469 ("[media] dw2102: limit messages to buffer size")
In the Linux kernel, the following vulnerability has been resolved: net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled. For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero") Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: <TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100 Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE.
In the Linux kernel, the following vulnerability has been resolved: mfd: ene-kb3930: Fix a potential NULL pointer dereference The off_gpios could be NULL. Add missing check in the kb3930_probe(). This is similar to the issue fixed in commit b1ba8bcb2d1f ("backlight: hx8357: Fix potential NULL pointer dereference"). This was detected by our static analysis tool.
In the Linux kernel before 4.20.14, expand_downwards in mm/mmap.c lacks a check for the mmap minimum address, which makes it easier for attackers to exploit kernel NULL pointer dereferences on non-SMAP platforms. This is related to a capability check for the wrong task.
In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Fix warning caused by destroying non-initial netns After the commit 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces"), if the IPoIB device is moved to non-initial netns, destroying that netns lets the device vanish instead of moving it back to the initial netns, This is happening because default_device_exit() skips the interfaces due to having rtnl_link_ops set. Steps to reporoduce: ip netns add foo ip link set mlx5_ib0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 704 at net/core/dev.c:11435 netdev_exit+0x3f/0x50 Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun d fuse CPU: 1 PID: 704 Comm: kworker/u64:3 Tainted: G S W 5.13.0-rc1+ #1 Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016 Workqueue: netns cleanup_net RIP: 0010:netdev_exit+0x3f/0x50 Code: 48 8b bb 30 01 00 00 e8 ef 81 b1 ff 48 81 fb c0 3a 54 a1 74 13 48 8b 83 90 00 00 00 48 81 c3 90 00 00 00 48 39 d8 75 02 5b c3 <0f> 0b 5b c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 RSP: 0018:ffffb297079d7e08 EFLAGS: 00010206 RAX: ffff8eb542c00040 RBX: ffff8eb541333150 RCX: 000000008010000d RDX: 000000008010000e RSI: 000000008010000d RDI: ffff8eb440042c00 RBP: ffffb297079d7e48 R08: 0000000000000001 R09: ffffffff9fdeac00 R10: ffff8eb5003be000 R11: 0000000000000001 R12: ffffffffa1545620 R13: ffffffffa1545628 R14: 0000000000000000 R15: ffffffffa1543b20 FS: 0000000000000000(0000) GS:ffff8ed37fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005601b5f4c2e8 CR3: 0000001fc8c10002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ops_exit_list.isra.9+0x36/0x70 cleanup_net+0x234/0x390 process_one_work+0x1cb/0x360 ? process_one_work+0x360/0x360 worker_thread+0x30/0x370 ? process_one_work+0x360/0x360 kthread+0x116/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 To avoid the above warning and later on the kernel panic that could happen on shutdown due to a NULL pointer dereference, make sure to set the netns_refund flag that was introduced by commit 3a5ca857079e ("can: dev: Move device back to init netns on owning netns delete") to properly restore the IPoIB interfaces to the initial netns.
In the Linux kernel, the following vulnerability has been resolved: i3c: Add NULL pointer check in i3c_master_queue_ibi() The I3C master driver may receive an IBI from a target device that has not been probed yet. In such cases, the master calls `i3c_master_queue_ibi()` to queue an IBI work task, leading to "Unable to handle kernel read from unreadable memory" and resulting in a kernel panic. Typical IBI handling flow: 1. The I3C master scans target devices and probes their respective drivers. 2. The target device driver calls `i3c_device_request_ibi()` to enable IBI and assigns `dev->ibi = ibi`. 3. The I3C master receives an IBI from the target device and calls `i3c_master_queue_ibi()` to queue the target device driver’s IBI handler task. However, since target device events are asynchronous to the I3C probe sequence, step 3 may occur before step 2, causing `dev->ibi` to be `NULL`, leading to a kernel panic. Add a NULL pointer check in `i3c_master_queue_ibi()` to prevent accessing an uninitialized `dev->ibi`, ensuring stability.
In the Linux kernel, the following vulnerability has been resolved: mptcp: sysctl: sched: avoid using current->nsproxy Using the 'net' structure via 'current' is not recommended for different reasons. First, if the goal is to use it to read or write per-netns data, this is inconsistent with how the "generic" sysctl entries are doing: directly by only using pointers set to the table entry, e.g. table->data. Linked to that, the per-netns data should always be obtained from the table linked to the netns it had been created for, which may not coincide with the reader's or writer's netns. Another reason is that access to current->nsproxy->netns can oops if attempted when current->nsproxy had been dropped when the current task is exiting. This is what syzbot found, when using acct(2): Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 1 UID: 0 PID: 5924 Comm: syz-executor Not tainted 6.13.0-rc5-syzkaller-00004-gccb98ccef0e5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00 RSP: 0018:ffffc900034774e8 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620 RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028 RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040 R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000 R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_sys_call_handler+0x403/0x5d0 fs/proc/proc_sysctl.c:601 __kernel_write_iter+0x318/0xa80 fs/read_write.c:612 __kernel_write+0xf6/0x140 fs/read_write.c:632 do_acct_process+0xcb0/0x14a0 kernel/acct.c:539 acct_pin_kill+0x2d/0x100 kernel/acct.c:192 pin_kill+0x194/0x7c0 fs/fs_pin.c:44 mnt_pin_kill+0x61/0x1e0 fs/fs_pin.c:81 cleanup_mnt+0x3ac/0x450 fs/namespace.c:1366 task_work_run+0x14e/0x250 kernel/task_work.c:239 exit_task_work include/linux/task_work.h:43 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 get_signal+0x2576/0x2610 kernel/signal.c:3017 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fee3cb87a6a Code: Unable to access opcode bytes at 0x7fee3cb87a40. RSP: 002b:00007fffcccac688 EFLAGS: 00000202 ORIG_RAX: 0000000000000037 RAX: 0000000000000000 RBX: 00007fffcccac710 RCX: 00007fee3cb87a6a RDX: 0000000000000041 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000003 R08: 00007fffcccac6ac R09: 00007fffcccacac7 R10: 00007fffcccac710 R11: 0000000000000202 R12: 00007fee3cd49500 R13: 00007fffcccac6ac R14: 0000000000000000 R15: 00007fee3cd4b000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ---truncated---
In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE There is a WARN_ON_ONCE to catch an unlikely situation when domain_remove_dev_pasid can't find the `pasid`. In case it nevertheless happens we must avoid using a NULL pointer.
In the Linux kernel, the following vulnerability has been resolved: net: mana: cleanup mana struct after debugfs_remove() When on a MANA VM hibernation is triggered, as part of hibernate_snapshot(), mana_gd_suspend() and mana_gd_resume() are called. If during this mana_gd_resume(), a failure occurs with HWC creation, mana_port_debugfs pointer does not get reinitialized and ends up pointing to older, cleaned-up dentry. Further in the hibernation path, as part of power_down(), mana_gd_shutdown() is triggered. This call, unaware of the failures in resume, tries to cleanup the already cleaned up mana_port_debugfs value and hits the following bug: [ 191.359296] mana 7870:00:00.0: Shutdown was called [ 191.359918] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ 191.360584] #PF: supervisor write access in kernel mode [ 191.361125] #PF: error_code(0x0002) - not-present page [ 191.361727] PGD 1080ea067 P4D 0 [ 191.362172] Oops: Oops: 0002 [#1] SMP NOPTI [ 191.362606] CPU: 11 UID: 0 PID: 1674 Comm: bash Not tainted 6.14.0-rc5+ #2 [ 191.363292] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 191.364124] RIP: 0010:down_write+0x19/0x50 [ 191.364537] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 de cd ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 16 65 48 8b 05 88 24 4c 6a 48 89 43 08 48 8b 5d [ 191.365867] RSP: 0000:ff45fbe0c1c037b8 EFLAGS: 00010246 [ 191.366350] RAX: 0000000000000000 RBX: 0000000000000098 RCX: ffffff8100000000 [ 191.366951] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098 [ 191.367600] RBP: ff45fbe0c1c037c0 R08: 0000000000000000 R09: 0000000000000001 [ 191.368225] R10: ff45fbe0d2b01000 R11: 0000000000000008 R12: 0000000000000000 [ 191.368874] R13: 000000000000000b R14: ff43dc27509d67c0 R15: 0000000000000020 [ 191.369549] FS: 00007dbc5001e740(0000) GS:ff43dc663f380000(0000) knlGS:0000000000000000 [ 191.370213] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 191.370830] CR2: 0000000000000098 CR3: 0000000168e8e002 CR4: 0000000000b73ef0 [ 191.371557] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 191.372192] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 191.372906] Call Trace: [ 191.373262] <TASK> [ 191.373621] ? show_regs+0x64/0x70 [ 191.374040] ? __die+0x24/0x70 [ 191.374468] ? page_fault_oops+0x290/0x5b0 [ 191.374875] ? do_user_addr_fault+0x448/0x800 [ 191.375357] ? exc_page_fault+0x7a/0x160 [ 191.375971] ? asm_exc_page_fault+0x27/0x30 [ 191.376416] ? down_write+0x19/0x50 [ 191.376832] ? down_write+0x12/0x50 [ 191.377232] simple_recursive_removal+0x4a/0x2a0 [ 191.377679] ? __pfx_remove_one+0x10/0x10 [ 191.378088] debugfs_remove+0x44/0x70 [ 191.378530] mana_detach+0x17c/0x4f0 [ 191.378950] ? __flush_work+0x1e2/0x3b0 [ 191.379362] ? __cond_resched+0x1a/0x50 [ 191.379787] mana_remove+0xf2/0x1a0 [ 191.380193] mana_gd_shutdown+0x3b/0x70 [ 191.380642] pci_device_shutdown+0x3a/0x80 [ 191.381063] device_shutdown+0x13e/0x230 [ 191.381480] kernel_power_off+0x35/0x80 [ 191.381890] hibernate+0x3c6/0x470 [ 191.382312] state_store+0xcb/0xd0 [ 191.382734] kobj_attr_store+0x12/0x30 [ 191.383211] sysfs_kf_write+0x3e/0x50 [ 191.383640] kernfs_fop_write_iter+0x140/0x1d0 [ 191.384106] vfs_write+0x271/0x440 [ 191.384521] ksys_write+0x72/0xf0 [ 191.384924] __x64_sys_write+0x19/0x20 [ 191.385313] x64_sys_call+0x2b0/0x20b0 [ 191.385736] do_syscall_64+0x79/0x150 [ 191.386146] ? __mod_memcg_lruvec_state+0xe7/0x240 [ 191.386676] ? __lruvec_stat_mod_folio+0x79/0xb0 [ 191.387124] ? __pfx_lru_add+0x10/0x10 [ 191.387515] ? queued_spin_unlock+0x9/0x10 [ 191.387937] ? do_anonymous_page+0x33c/0xa00 [ 191.388374] ? __handle_mm_fault+0xcf3/0x1210 [ 191.388805] ? __count_memcg_events+0xbe/0x180 [ 191.389235] ? handle_mm_fault+0xae/0x300 [ 19 ---truncated---
In the Linux kernel, the following vulnerability has been resolved: dpll: fix xa_alloc_cyclic() error handling In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will be returned, which will cause IS_ERR() to be false. Which can lead to dereference not allocated pointer (pin). Fix it by checking if err is lower than zero. This wasn't found in real usecase, only noticed. Credit to Pierre.
In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers Other, non DAI copier widgets could have the same stream name (sname) as the ALH copier and in that case the copier->data is NULL, no alh_data is attached, which could lead to NULL pointer dereference. We could check for this NULL pointer in sof_ipc4_prepare_copier_module() and avoid the crash, but a similar loop in sof_ipc4_widget_setup_comp_dai() will miscalculate the ALH device count, causing broken audio. The correct fix is to harden the matching logic by making sure that the 1. widget is a DAI widget - so dai = w->private is valid 2. the dai (and thus the copier) is ALH copier
In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Ensure shadow stack is active before "getting" registers The x86 shadow stack support has its own set of registers. Those registers are XSAVE-managed, but they are "supervisor state components" which means that userspace can not touch them with XSAVE/XRSTOR. It also means that they are not accessible from the existing ptrace ABI for XSAVE state. Thus, there is a new ptrace get/set interface for it. The regset code that ptrace uses provides an ->active() handler in addition to the get/set ones. For shadow stack this ->active() handler verifies that shadow stack is enabled via the ARCH_SHSTK_SHSTK bit in the thread struct. The ->active() handler is checked from some call sites of the regset get/set handlers, but not the ptrace ones. This was not understood when shadow stack support was put in place. As a result, both the set/get handlers can be called with XFEATURE_CET_USER in its init state, which would cause get_xsave_addr() to return NULL and trigger a WARN_ON(). The ssp_set() handler luckily has an ssp_active() check to avoid surprising the kernel with shadow stack behavior when the kernel is not ready for it (ARCH_SHSTK_SHSTK==0). That check just happened to avoid the warning. But the ->get() side wasn't so lucky. It can be called with shadow stacks disabled, triggering the warning in practice, as reported by Christina Schimpe: WARNING: CPU: 5 PID: 1773 at arch/x86/kernel/fpu/regset.c:198 ssp_get+0x89/0xa0 [...] Call Trace: <TASK> ? show_regs+0x6e/0x80 ? ssp_get+0x89/0xa0 ? __warn+0x91/0x150 ? ssp_get+0x89/0xa0 ? report_bug+0x19d/0x1b0 ? handle_bug+0x46/0x80 ? exc_invalid_op+0x1d/0x80 ? asm_exc_invalid_op+0x1f/0x30 ? __pfx_ssp_get+0x10/0x10 ? ssp_get+0x89/0xa0 ? ssp_get+0x52/0xa0 __regset_get+0xad/0xf0 copy_regset_to_user+0x52/0xc0 ptrace_regset+0x119/0x140 ptrace_request+0x13c/0x850 ? wait_task_inactive+0x142/0x1d0 ? do_syscall_64+0x6d/0x90 arch_ptrace+0x102/0x300 [...] Ensure that shadow stacks are active in a thread before looking them up in the XSAVE buffer. Since ARCH_SHSTK_SHSTK and user_ssp[SHSTK_EN] are set at the same time, the active check ensures that there will be something to find in the XSAVE buffer. [ dhansen: changelog/subject tweaks ]
In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix NULL pointer access Resources should be released only after all threads that utilize them have been destroyed. This commit ensures that resources are not released prematurely by waiting for the associated workqueue to complete before deallocating them.
In the Linux kernel, the following vulnerability has been resolved: drm: xlnx: zynqmp_dpsub: Add NULL check in zynqmp_audio_init devm_kasprintf() calls can return null pointers on failure. But some return values were not checked in zynqmp_audio_init(). Add NULL check in zynqmp_audio_init(), avoid referencing null pointers in the subsequent code.
In the Linux kernel, the following vulnerability has been resolved: ext4: allow ext4_get_group_info() to fail Previously, ext4_get_group_info() would treat an invalid group number as BUG(), since in theory it should never happen. However, if a malicious attaker (or fuzzer) modifies the superblock via the block device while it is the file system is mounted, it is possible for s_first_data_block to get set to a very large number. In that case, when calculating the block group of some block number (such as the starting block of a preallocation region), could result in an underflow and very large block group number. Then the BUG_ON check in ext4_get_group_info() would fire, resutling in a denial of service attack that can be triggered by root or someone with write access to the block device. For a quality of implementation perspective, it's best that even if the system administrator does something that they shouldn't, that it will not trigger a BUG. So instead of BUG'ing, ext4_get_group_info() will call ext4_error and return NULL. We also add fallback code in all of the callers of ext4_get_group_info() that it might NULL. Also, since ext4_get_group_info() was already borderline to be an inline function, un-inline it. The results in a next reduction of the compiled text size of ext4 by roughly 2k.
In the Linux kernel, the following vulnerability has been resolved: net: fec: handle page_pool_dev_alloc_pages error The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet.
In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() On removal of the device or unloading of the kernel module a potential NULL pointer dereference occurs. The following sequence deletes the interface: brcmf_detach() brcmf_remove_interface() brcmf_del_if() Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches. After brcmf_remove_interface() call the brcmf_proto_detach() function is called providing the following sequence: brcmf_detach() brcmf_proto_detach() brcmf_proto_msgbuf_detach() brcmf_flowring_detach() brcmf_msgbuf_delete_flowring() brcmf_msgbuf_remove_flowring() brcmf_flowring_delete() brcmf_get_ifp() brcmf_txfinalize() Since brcmf_get_ip() can and actually will return NULL in this case the call to brcmf_txfinalize() will result in a NULL pointer dereference inside brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors. This will only happen if a flowring still has an skb. Although the NULL pointer dereference has only been seen when trying to update the tx statistic, all other uses of the ifp pointer have been guarded as well with an early return if ifp is NULL.
In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: Reinit blkg_iostat_set after clearing in blkcg_reset_stats() When blkg_alloc() is called to allocate a blkcg_gq structure with the associated blkg_iostat_set's, there are 2 fields within blkg_iostat_set that requires proper initialization - blkg & sync. The former field was introduced by commit 3b8cc6298724 ("blk-cgroup: Optimize blkcg_rstat_flush()") while the later one was introduced by commit f73316482977 ("blk-cgroup: reimplement basic IO stats using cgroup rstat"). Unfortunately those fields in the blkg_iostat_set's are not properly re-initialized when they are cleared in v1's blkcg_reset_stats(). This can lead to a kernel panic due to NULL pointer access of the blkg pointer. The missing initialization of sync is less problematic and can be a problem in a debug kernel due to missing lockdep initialization. Fix these problems by re-initializing them after memory clearing.
In the Linux kernel, the following vulnerability has been resolved: raw: Fix NULL deref in raw_get_next(). Dae R. Jeong reported a NULL deref in raw_get_next() [0]. It seems that the repro was running these sequences in parallel so that one thread was iterating on a socket that was being freed in another netns. unshare(0x40060200) r0 = syz_open_procfs(0x0, &(0x7f0000002080)='net/raw\x00') socket$inet_icmp_raw(0x2, 0x3, 0x1) pread64(r0, &(0x7f0000000000)=""/10, 0xa, 0x10000000007f) After commit 0daf07e52709 ("raw: convert raw sockets to RCU"), we use RCU and hlist_nulls_for_each_entry() to iterate over SOCK_RAW sockets. However, we should use spinlock for slow paths to avoid the NULL deref. Also, SOCK_RAW does not use SLAB_TYPESAFE_BY_RCU, and the slab object is not reused during iteration in the grace period. In fact, the lockless readers do not check the nulls marker with get_nulls_value(). So, SOCK_RAW should use hlist instead of hlist_nulls. Instead of adding an unnecessary barrier by sk_nulls_for_each_rcu(), let's convert hlist_nulls to hlist and use sk_for_each_rcu() for fast paths and sk_for_each() and spinlock for /proc/net/raw. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 2 PID: 20952 Comm: syz-executor.0 Not tainted 6.2.0-g048ec869bafd-dirty #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline] RIP: 0010:sock_net include/net/sock.h:649 [inline] RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline] RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline] RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995 Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206 RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000 RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338 RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9 R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78 R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030 FS: 00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb9614b35f CR3: 000000003c672000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> seq_read_iter+0x4c6/0x10f0 fs/seq_file.c:225 seq_read+0x224/0x320 fs/seq_file.c:162 pde_read fs/proc/inode.c:316 [inline] proc_reg_read+0x23f/0x330 fs/proc/inode.c:328 vfs_read+0x31e/0xd30 fs/read_write.c:468 ksys_pread64 fs/read_write.c:665 [inline] __do_sys_pread64 fs/read_write.c:675 [inline] __se_sys_pread64 fs/read_write.c:672 [inline] __x64_sys_pread64+0x1e9/0x280 fs/read_write.c:672 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x478d29 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f843ae8dbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000011 RAX: ffffffffffffffda RBX: 0000000000791408 RCX: 0000000000478d29 RDX: 000000000000000a RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000f477909a R08: 0000000000000000 R09: 0000000000000000 R10: 000010000000007f R11: 0000000000000246 R12: 0000000000791740 R13: 0000000000791414 R14: 0000000000791408 R15: 00007ffc2eb48a50 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010 ---truncated---
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Validate prev_cpu in scx_bpf_select_cpu_dfl() If a BPF scheduler provides an invalid CPU (outside the nr_cpu_ids range) as prev_cpu to scx_bpf_select_cpu_dfl() it can cause a kernel crash. To prevent this, validate prev_cpu in scx_bpf_select_cpu_dfl() and trigger an scx error if an invalid CPU is specified.
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Track xmit submission to PTP WQ after populating metadata map Ensure the skb is available in metadata mapping to skbs before tracking the metadata index for detecting undelivered CQEs. If the metadata index is put in the tracking list before putting the skb in the map, the metadata index might be used for detecting undelivered CQEs before the relevant skb is available in the map, which can lead to a null-ptr-deref. Log: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 0 PID: 1243 Comm: kworker/0:2 Not tainted 6.6.0-rc4+ #108 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: events mlx5e_rx_dim_work [mlx5_core] RIP: 0010:mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] Code: 8c 24 38 cc ff ff 4c 8d 3c c1 4c 89 f9 48 c1 e9 03 42 80 3c 31 00 0f 85 97 0f 00 00 4d 8b 3f 49 8d 7f 28 48 89 f9 48 c1 e9 03 <42> 80 3c 31 00 0f 85 8b 0f 00 00 49 8b 47 28 48 85 c0 0f 84 05 07 RSP: 0018:ffff8884d3c09c88 EFLAGS: 00010206 RAX: 0000000000000069 RBX: ffff8881160349d8 RCX: 0000000000000005 RDX: ffffed10218f48cf RSI: 0000000000000004 RDI: 0000000000000028 RBP: ffff888122707700 R08: 0000000000000001 R09: ffffed109a781383 R10: 0000000000000003 R11: 0000000000000003 R12: ffff88810c7a7a40 R13: ffff888122707700 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8884d3c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4f878dd6e0 CR3: 000000014d108002 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? die_addr+0x3c/0xa0 ? exc_general_protection+0x144/0x210 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] ? mlx5e_ptp_napi_poll+0x8f6/0x2290 [mlx5_core] __napi_poll.constprop.0+0xa4/0x580 net_rx_action+0x460/0xb80 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? __napi_poll.constprop.0+0x580/0x580 ? tasklet_action_common.isra.0+0x2ef/0x760 __do_softirq+0x26c/0x827 irq_exit_rcu+0xc2/0x100 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:__kmem_cache_alloc_node+0xb/0x330 Code: 41 5d 41 5e 41 5f c3 8b 44 24 14 8b 4c 24 10 09 c8 eb d5 e8 b7 43 ca 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 <41> 56 41 89 d6 41 55 41 89 f5 41 54 49 89 fc 53 48 83 e4 f0 48 83 RSP: 0018:ffff88812c4079c0 EFLAGS: 00000246 RAX: 1ffffffff083c7fe RBX: ffff888100042dc0 RCX: 0000000000000218 RDX: 00000000ffffffff RSI: 0000000000000dc0 RDI: ffff888100042dc0 RBP: ffff88812c4079c8 R08: ffffffffa0289f96 R09: ffffed1025880ea9 R10: ffff888138839f80 R11: 0000000000000002 R12: 0000000000000dc0 R13: 0000000000000100 R14: 000000000000008c R15: ffff8881271fc450 ? cmd_exec+0x796/0x2200 [mlx5_core] kmalloc_trace+0x26/0xc0 cmd_exec+0x796/0x2200 [mlx5_core] mlx5_cmd_do+0x22/0xc0 [mlx5_core] mlx5_cmd_exec+0x17/0x30 [mlx5_core] mlx5_core_modify_cq_moderation+0x139/0x1b0 [mlx5_core] ? mlx5_add_cq_to_tasklet+0x280/0x280 [mlx5_core] ? lockdep_set_lock_cmp_fn+0x190/0x190 ? process_one_work+0x659/0x1220 mlx5e_rx_dim_work+0x9d/0x100 [mlx5_core] process_one_work+0x730/0x1220 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? max_active_store+0xf0/0xf0 ? assign_work+0x168/0x240 worker_thread+0x70f/0x12d0 ? __kthread_parkme+0xd1/0x1d0 ? process_one_work+0x1220/0x1220 kthread+0x2d9/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_as ---truncated---
In the Linux kernel, the following vulnerability has been resolved: fs/9p: fix NULL pointer dereference on mkdir When a 9p tree was mounted with option 'posixacl', parent directory had a default ACL set for its subdirectories, e.g.: setfacl -m default:group:simpsons:rwx parentdir then creating a subdirectory crashed 9p client, as v9fs_fid_add() call in function v9fs_vfs_mkdir_dotl() sets the passed 'fid' pointer to NULL (since dafbe689736) even though the subsequent v9fs_set_create_acl() call expects a valid non-NULL 'fid' pointer: [ 37.273191] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 37.322338] Call Trace: [ 37.323043] <TASK> [ 37.323621] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 37.324448] ? page_fault_oops (arch/x86/mm/fault.c:714) [ 37.325532] ? search_module_extables (kernel/module/main.c:3733) [ 37.326742] ? p9_client_walk (net/9p/client.c:1165) 9pnet [ 37.328006] ? search_bpf_extables (kernel/bpf/core.c:804) [ 37.329142] ? exc_page_fault (./arch/x86/include/asm/paravirt.h:686 arch/x86/mm/fault.c:1488 arch/x86/mm/fault.c:1538) [ 37.330196] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:574) [ 37.331330] ? p9_client_walk (net/9p/client.c:1165) 9pnet [ 37.332562] ? v9fs_fid_xattr_get (fs/9p/xattr.c:30) 9p [ 37.333824] v9fs_fid_xattr_set (fs/9p/fid.h:23 fs/9p/xattr.c:121) 9p [ 37.335077] v9fs_set_acl (fs/9p/acl.c:276) 9p [ 37.336112] v9fs_set_create_acl (fs/9p/acl.c:307) 9p [ 37.337326] v9fs_vfs_mkdir_dotl (fs/9p/vfs_inode_dotl.c:411) 9p [ 37.338590] vfs_mkdir (fs/namei.c:4313) [ 37.339535] do_mkdirat (fs/namei.c:4336) [ 37.340465] __x64_sys_mkdir (fs/namei.c:4354) [ 37.341455] do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) [ 37.342447] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fix this by simply swapping the sequence of these two calls in v9fs_vfs_mkdir_dotl(), i.e. calling v9fs_set_create_acl() before v9fs_fid_add().
In the Linux kernel, the following vulnerability has been resolved: ptp: Ensure info->enable callback is always set The ioctl and sysfs handlers unconditionally call the ->enable callback. Not all drivers implement that callback, leading to NULL dereferences. Example of affected drivers: ptp_s390.c, ptp_vclock.c and ptp_mock.c. Instead use a dummy callback if no better was specified by the driver.
In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix possible crash when setting up bsg fails If bsg_setup_queue() fails, the bsg_queue is assigned a non-NULL value. Consequently, in mpi3mr_bsg_exit(), the condition "if(!mrioc->bsg_queue)" will not be satisfied, preventing execution from entering bsg_remove_queue(), which could lead to the following crash: BUG: kernel NULL pointer dereference, address: 000000000000041c Call Trace: <TASK> mpi3mr_bsg_exit+0x1f/0x50 [mpi3mr] mpi3mr_remove+0x6f/0x340 [mpi3mr] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19d/0x220 unbind_store+0xa4/0xb0 kernfs_fop_write_iter+0x11f/0x200 vfs_write+0x1fc/0x3e0 ksys_write+0x67/0xe0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x78/0xe2
In the Linux kernel, the following vulnerability has been resolved: HID: appleir: Fix potential NULL dereference at raw event handle Syzkaller reports a NULL pointer dereference issue in input_event(). BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline] BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395 Read of size 8 at addr 0000000000000028 by task syz-executor199/2949 CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 kasan_report+0xd9/0x110 mm/kasan/report.c:602 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 instrument_atomic_read include/linux/instrumented.h:68 [inline] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] is_event_supported drivers/input/input.c:67 [inline] input_event+0x42/0xa0 drivers/input/input.c:395 input_report_key include/linux/input.h:439 [inline] key_down drivers/hid/hid-appleir.c:159 [inline] appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232 __hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111 hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484 __usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734 dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993 __run_hrtimer kernel/time/hrtimer.c:1739 [inline] __hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803 hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820 handle_softirqs+0x206/0x8d0 kernel/softirq.c:561 __do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline] __irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 __mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185 add_timer+0x62/0x90 kernel/time/timer.c:1295 schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98 usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645 usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784 hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> This happens due to the malformed report items sent by the emulated device which results in a report, that has no fields, being added to the report list. Due to this appleir_input_configured() is never called, hidinput_connect() fails which results in the HID_CLAIMED_INPUT flag is not being set. However, it does not make appleir_probe() fail and lets the event callback to be called without the associated input device. Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook early if the driver didn't claim any input_dev for some reason. Moreover, some other hid drivers accessing input_dev in their event callbacks do have similar checks, too. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: smb: client: Add check for next_buffer in receive_encrypted_standard() Add check for the return value of cifs_buf_get() and cifs_small_buf_get() in receive_encrypted_standard() to prevent null pointer dereference.
In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow When cur_qp isn't NULL, in order to avoid fetching the QP from the radix tree again we check if the next cqe QP is identical to the one we already have. The bug however is that we are checking if the QP is identical by checking the QP number inside the CQE against the QP number inside the mlx5_ib_qp, but that's wrong since the QP number from the CQE is from FW so it should be matched against mlx5_core_qp which is our FW QP number. Otherwise we could use the wrong QP when handling a CQE which could cause the kernel trace below. This issue is mainly noticeable over QPs 0 & 1, since for now they are the only QPs in our driver whereas the QP number inside mlx5_ib_qp doesn't match the QP number inside mlx5_core_qp. BUG: kernel NULL pointer dereference, address: 0000000000000012 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 0 UID: 0 PID: 7927 Comm: kworker/u62:1 Not tainted 6.14.0-rc3+ #189 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] RIP: 0010:mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib] Code: 03 00 00 8d 58 ff 21 cb 66 39 d3 74 39 48 c7 c7 3c 89 6e a0 0f b7 db e8 b7 d2 b3 e0 49 8b 86 60 03 00 00 48 c7 c7 4a 89 6e a0 <0f> b7 5c 98 02 e8 9f d2 b3 e0 41 0f b7 86 78 03 00 00 83 e8 01 21 RSP: 0018:ffff88810511bd60 EFLAGS: 00010046 RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88885fa1b3c0 RDI: ffffffffa06e894a RBP: 00000000000000b0 R08: 0000000000000000 R09: ffff88810511bc10 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88810d593000 R13: ffff88810e579108 R14: ffff888105146000 R15: 00000000000000b0 FS: 0000000000000000(0000) GS:ffff88885fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000012 CR3: 00000001077e6001 CR4: 0000000000370eb0 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib] __ib_process_cq+0x5a/0x150 [ib_core] ib_cq_poll_work+0x31/0x90 [ib_core] process_one_work+0x169/0x320 worker_thread+0x288/0x3a0 ? work_busy+0xb0/0xb0 kthread+0xd7/0x1f0 ? kthreads_online_cpu+0x130/0x130 ? kthreads_online_cpu+0x130/0x130 ret_from_fork+0x2d/0x50 ? kthreads_online_cpu+0x130/0x130 ret_from_fork_asm+0x11/0x20 </TASK>
In the Linux kernel, the following vulnerability has been resolved: xfrm: delete intermediate secpath entry in packet offload mode Packets handled by hardware have added secpath as a way to inform XFRM core code that this path was already handled. That secpath is not needed at all after policy is checked and it is removed later in the stack. However, in the case of IP forwarding is enabled (/proc/sys/net/ipv4/ip_forward), that secpath is not removed and packets which already were handled are reentered to the driver TX path with xfrm_offload set. The following kernel panic is observed in mlx5 in such case: mlx5_core 0000:04:00.0 enp4s0f0np0: Link up mlx5_core 0000:04:00.1 enp4s0f1np1: Link up Initializing XFRM netlink socket IPsec XFRM device driver BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: Oops: 0010 [#1] PREEMPT SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc1-alex #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffb87380003800 EFLAGS: 00010206 RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00 RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010 R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00 R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0 Call Trace: <IRQ> ? show_regs+0x63/0x70 ? __die_body+0x20/0x60 ? __die+0x2b/0x40 ? page_fault_oops+0x15c/0x550 ? do_user_addr_fault+0x3ed/0x870 ? exc_page_fault+0x7f/0x190 ? asm_exc_page_fault+0x27/0x30 mlx5e_ipsec_handle_tx_skb+0xe7/0x2f0 [mlx5_core] mlx5e_xmit+0x58e/0x1980 [mlx5_core] ? __fib_lookup+0x6a/0xb0 dev_hard_start_xmit+0x82/0x1d0 sch_direct_xmit+0xfe/0x390 __dev_queue_xmit+0x6d8/0xee0 ? __fib_lookup+0x6a/0xb0 ? internal_add_timer+0x48/0x70 ? mod_timer+0xe2/0x2b0 neigh_resolve_output+0x115/0x1b0 __neigh_update+0x26a/0xc50 neigh_update+0x14/0x20 arp_process+0x2cb/0x8e0 ? __napi_build_skb+0x5e/0x70 arp_rcv+0x11e/0x1c0 ? dev_gro_receive+0x574/0x820 __netif_receive_skb_list_core+0x1cf/0x1f0 netif_receive_skb_list_internal+0x183/0x2a0 napi_complete_done+0x76/0x1c0 mlx5e_napi_poll+0x234/0x7a0 [mlx5_core] __napi_poll+0x2d/0x1f0 net_rx_action+0x1a6/0x370 ? atomic_notifier_call_chain+0x3b/0x50 ? irq_int_handler+0x15/0x20 [mlx5_core] handle_softirqs+0xb9/0x2f0 ? handle_irq_event+0x44/0x60 irq_exit_rcu+0xdb/0x100 common_interrupt+0x98/0xc0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 RIP: 0010:pv_native_safe_halt+0xb/0x10 Code: 09 c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 22 0f 1f 84 00 00 00 00 00 90 eb 07 0f 00 2d 7f e9 36 00 fb 40 00 83 ff 07 77 21 89 ff ff 24 fd 88 3d a1 bd 0f 21 f8 RSP: 0018:ffffffffbe603de8 EFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000f92f46680 RDX: 0000000000000037 RSI: 00000000ffffffff RDI: 00000000000518d4 RBP: ffffffffbe603df0 R08: 000000cd42e4dffb R09: ffffffffbe603d70 R10: 0000004d80d62680 R11: 0000000000000001 R12: ffffffffbe60bf40 R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffbe60aff8 ? default_idle+0x9/0x20 arch_cpu_idle+0x9/0x10 default_idle_call+0x29/0xf0 do_idle+0x1f2/0x240 cpu_startup_entry+0x2c/0x30 rest_init+0xe7/0x100 start_kernel+0x76b/0xb90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xc0/0x110 ? setup_ghcb+0xe/0x130 common_startup_64+0x13e/0x141 </TASK> Modules linked in: esp4_offload esp4 xfrm_interface xfrm6_tunnel tunnel4 tunnel6 xfrm_user xfrm_algo binf ---truncated---
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Unmap the surface before resetting it on a plane state Switch to a new plane state requires unreferencing of all held surfaces. In the work required for mob cursors the mapped surfaces started being cached but the variable indicating whether the surface is currently mapped was not being reset. This leads to crashes as the duplicated state, incorrectly, indicates the that surface is mapped even when no surface is present. That's because after unreferencing the surface it's perfectly possible for the plane to be backed by a bo instead of a surface. Reset the surface mapped flag when unreferencing the plane state surface to fix null derefs in cleanup. Fixes crashes in KDE KWin 6.0 on Wayland: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 2533 Comm: kwin_wayland Not tainted 6.7.0-rc3-vmwgfx #2 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f> RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600 RBP: ffff969d4143dc50 R08: 0000000000000000 R09: ffffb6b98216f920 R10: 0000000000000003 R11: ffff969e7feb3b10 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000027b R15: ffff969d49c9fc00 FS: 00007f1e8f1b4180(0000) GS:ffff969e75f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000104006004 CR4: 00000000003706f0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] drm_atomic_helper_cleanup_planes+0x9b/0xc0 commit_tail+0xd1/0x130 drm_atomic_helper_commit+0x11a/0x140 drm_atomic_commit+0x97/0xd0 ? __pfx___drm_printfn_info+0x10/0x10 drm_atomic_helper_update_plane+0xf5/0x160 drm_mode_cursor_universal+0x10e/0x270 drm_mode_cursor_common+0x102/0x230 ? __pfx_drm_mode_cursor2_ioctl+0x10/0x10 drm_ioctl_kernel+0xb2/0x110 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_cursor2_ioctl+0x10/0x10 ? __pfx_drm_ioctl+0x10/0x10 vmw_generic_ioctl+0xa4/0x110 [vmwgfx] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x61/0xe0 ? __x64_sys_ioctl+0xaf/0xd0 ? syscall_exit_to_user_mode+0x2b/0x40 ? do_syscall_64+0x70/0xe0 ? __x64_sys_ioctl+0xaf/0xd0 ? syscall_exit_to_user_mode+0x2b/0x40 ? do_syscall_64+0x70/0xe0 ? exc_page_fault+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f1e93f279ed Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff f> RSP: 002b:00007ffca0faf600 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055db876ed2c0 RCX: 00007f1e93f279ed RDX: 00007ffca0faf6c0 RSI: 00000000c02464bb RDI: 0000000000000015 RBP: 00007ffca0faf650 R08: 000055db87184010 R09: 0000000000000007 R10: 000055db886471a0 R11: 0000000000000246 R12: 00007ffca0faf6c0 R13: 00000000c02464bb R14: 0000000000000015 R15: 00007ffca0faf790 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_ine> CR2: 0000000000000028 ---[ end trace 0000000000000000 ]--- RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f> RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600 RBP: ffff969d4143 ---truncated---