In the Linux kernel, the following vulnerability has been resolved: bfq: Update cgroup information before merging bio When the process is migrated to a different cgroup (or in case of writeback just starts submitting bios associated with a different cgroup) bfq_merge_bio() can operate with stale cgroup information in bic. Thus the bio can be merged to a request from a different cgroup or it can result in merging of bfqqs for different cgroups or bfqqs of already dead cgroups and causing possible use-after-free issues. Fix the problem by updating cgroup information in bfq_merge_bio().

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix double free in si_parse_power_table() In function si_parse_power_table(), array adev->pm.dpm.ps and its member is allocated. If the allocation of each member fails, the array itself is freed and returned with an error code. However, the array is later freed again in si_dpm_fini() function which is called when the function returns an error. This leads to potential double free of the array adev->pm.dpm.ps, as well as leak of its array members, since the members are not freed in the allocation function and the array is not nulled when freed. In addition adev->pm.dpm.num_ps, which keeps track of the allocated array member, is not updated until the member allocation is successfully finished, this could also lead to either use after free, or uninitialized variable access in si_dpm_fini(). Fix this by postponing the free of the array until si_dpm_fini() and increment adev->pm.dpm.num_ps everytime the array member is allocated.

An issue was discovered in the Linux kernel 5.5 through 5.7.9, as used in Xen through 4.13.x for x86 PV guests. An attacker may be granted the I/O port permissions of an unrelated task. This occurs because tss_invalidate_io_bitmap mishandling causes a loss of synchronization between the I/O bitmaps of TSS and Xen, aka CID-cadfad870154.

drivers/media/usb/dvb-usb/dw2102.c in the Linux kernel 4.9.x and 4.10.x before 4.10.4 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist.

The dccp_disconnect function in net/dccp/proto.c in the Linux kernel through 4.14.3 allows local users to gain privileges or cause a denial of service (use-after-free) via an AF_UNSPEC connect system call during the DCCP_LISTEN state.

In the Linux kernel, the following vulnerability has been resolved: iio: trigger: sysfs: fix use-after-free on remove Ensure that the irq_work has completed before the trigger is freed. ================================================================== BUG: KASAN: use-after-free in irq_work_run_list Read of size 8 at addr 0000000064702248 by task python3/25 Call Trace: irq_work_run_list irq_work_tick update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt Allocated by task 25: kmem_cache_alloc_trace iio_sysfs_trig_add dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write Freed by task 25: kfree iio_sysfs_trig_remove dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write ==================================================================

In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free after 802.3ad slave unbind commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection"), resolve case, when there is several aggregation groups in the same bond. bond_3ad_unbind_slave will invalidate (clear) aggregator when __agg_active_ports return zero. So, ad_clear_agg can be executed even, when num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for, previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave will not update slave ports list, because lag_ports==NULL. So, here we got slave ports, pointing to freed aggregator memory. Fix with checking actual number of ports in group (as was before commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") ), before ad_clear_agg(). The KASAN logs are as follows: [ 767.617392] ================================================================== [ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470 [ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767 [ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15 [ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler [ 767.666468] Call trace: [ 767.668930] dump_backtrace+0x0/0x2d0 [ 767.672625] show_stack+0x24/0x30 [ 767.675965] dump_stack_lvl+0x68/0x84 [ 767.679659] print_address_description.constprop.0+0x74/0x2b8 [ 767.685451] kasan_report+0x1f0/0x260 [ 767.689148] __asan_load2+0x94/0xd0 [ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470

In the Linux kernel, the following vulnerability has been resolved: igb: fix a use-after-free issue in igb_clean_tx_ring Fix the following use-after-free bug in igb_clean_tx_ring routine when the NIC is running in XDP mode. The issue can be triggered redirecting traffic into the igb NIC and then closing the device while the traffic is flowing. [ 73.322719] CPU: 1 PID: 487 Comm: xdp_redirect Not tainted 5.18.3-apu2 #9 [ 73.330639] Hardware name: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017 [ 73.337434] RIP: 0010:refcount_warn_saturate+0xa7/0xf0 [ 73.362283] RSP: 0018:ffffc9000081f798 EFLAGS: 00010282 [ 73.367761] RAX: 0000000000000000 RBX: ffffc90000420f80 RCX: 0000000000000000 [ 73.375200] RDX: ffff88811ad22d00 RSI: ffff88811ad171e0 RDI: ffff88811ad171e0 [ 73.382590] RBP: 0000000000000900 R08: ffffffff82298f28 R09: 0000000000000058 [ 73.390008] R10: 0000000000000219 R11: ffffffff82280f40 R12: 0000000000000090 [ 73.397356] R13: ffff888102343a40 R14: ffff88810359e0e4 R15: 0000000000000000 [ 73.404806] FS: 00007ff38d31d740(0000) GS:ffff88811ad00000(0000) knlGS:0000000000000000 [ 73.413129] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 73.419096] CR2: 000055cff35f13f8 CR3: 0000000106391000 CR4: 00000000000406e0 [ 73.426565] Call Trace: [ 73.429087] <TASK> [ 73.431314] igb_clean_tx_ring+0x43/0x140 [igb] [ 73.436002] igb_down+0x1d7/0x220 [igb] [ 73.439974] __igb_close+0x3c/0x120 [igb] [ 73.444118] igb_xdp+0x10c/0x150 [igb] [ 73.447983] ? igb_pci_sriov_configure+0x70/0x70 [igb] [ 73.453362] dev_xdp_install+0xda/0x110 [ 73.457371] dev_xdp_attach+0x1da/0x550 [ 73.461369] do_setlink+0xfd0/0x10f0 [ 73.465166] ? __nla_validate_parse+0x89/0xc70 [ 73.469714] rtnl_setlink+0x11a/0x1e0 [ 73.473547] rtnetlink_rcv_msg+0x145/0x3d0 [ 73.477709] ? rtnl_calcit.isra.0+0x130/0x130 [ 73.482258] netlink_rcv_skb+0x8d/0x110 [ 73.486229] netlink_unicast+0x230/0x340 [ 73.490317] netlink_sendmsg+0x215/0x470 [ 73.494395] __sys_sendto+0x179/0x190 [ 73.498268] ? move_addr_to_user+0x37/0x70 [ 73.502547] ? __sys_getsockname+0x84/0xe0 [ 73.506853] ? netlink_setsockopt+0x1c1/0x4a0 [ 73.511349] ? __sys_setsockopt+0xc8/0x1d0 [ 73.515636] __x64_sys_sendto+0x20/0x30 [ 73.519603] do_syscall_64+0x3b/0x80 [ 73.523399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 73.528712] RIP: 0033:0x7ff38d41f20c [ 73.551866] RSP: 002b:00007fff3b945a68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 73.559640] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff38d41f20c [ 73.567066] RDX: 0000000000000034 RSI: 00007fff3b945b30 RDI: 0000000000000003 [ 73.574457] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 73.581852] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff3b945ab0 [ 73.589179] R13: 0000000000000000 R14: 0000000000000003 R15: 00007fff3b945b30 [ 73.596545] </TASK> [ 73.598842] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: blk-throttle: Set BIO_THROTTLED when bio has been throttled 1.In current process, all bio will set the BIO_THROTTLED flag after __blk_throtl_bio(). 2.If bio needs to be throttled, it will start the timer and stop submit bio directly. Bio will submit in blk_throtl_dispatch_work_fn() when the timer expires.But in the current process, if bio is throttled. The BIO_THROTTLED will be set to bio after timer start. If the bio has been completed, it may cause use-after-free blow. BUG: KASAN: use-after-free in blk_throtl_bio+0x12f0/0x2c70 Read of size 2 at addr ffff88801b8902d4 by task fio/26380 dump_stack+0x9b/0xce print_address_description.constprop.6+0x3e/0x60 kasan_report.cold.9+0x22/0x3a blk_throtl_bio+0x12f0/0x2c70 submit_bio_checks+0x701/0x1550 submit_bio_noacct+0x83/0xc80 submit_bio+0xa7/0x330 mpage_readahead+0x380/0x500 read_pages+0x1c1/0xbf0 page_cache_ra_unbounded+0x471/0x6f0 do_page_cache_ra+0xda/0x110 ondemand_readahead+0x442/0xae0 page_cache_async_ra+0x210/0x300 generic_file_buffered_read+0x4d9/0x2130 generic_file_read_iter+0x315/0x490 blkdev_read_iter+0x113/0x1b0 aio_read+0x2ad/0x450 io_submit_one+0xc8e/0x1d60 __se_sys_io_submit+0x125/0x350 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 26380: kasan_save_stack+0x19/0x40 __kasan_kmalloc.constprop.2+0xc1/0xd0 kmem_cache_alloc+0x146/0x440 mempool_alloc+0x125/0x2f0 bio_alloc_bioset+0x353/0x590 mpage_alloc+0x3b/0x240 do_mpage_readpage+0xddf/0x1ef0 mpage_readahead+0x264/0x500 read_pages+0x1c1/0xbf0 page_cache_ra_unbounded+0x471/0x6f0 do_page_cache_ra+0xda/0x110 ondemand_readahead+0x442/0xae0 page_cache_async_ra+0x210/0x300 generic_file_buffered_read+0x4d9/0x2130 generic_file_read_iter+0x315/0x490 blkdev_read_iter+0x113/0x1b0 aio_read+0x2ad/0x450 io_submit_one+0xc8e/0x1d60 __se_sys_io_submit+0x125/0x350 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 0: kasan_save_stack+0x19/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x1b/0x30 __kasan_slab_free+0x111/0x160 kmem_cache_free+0x94/0x460 mempool_free+0xd6/0x320 bio_free+0xe0/0x130 bio_put+0xab/0xe0 bio_endio+0x3a6/0x5d0 blk_update_request+0x590/0x1370 scsi_end_request+0x7d/0x400 scsi_io_completion+0x1aa/0xe50 scsi_softirq_done+0x11b/0x240 blk_mq_complete_request+0xd4/0x120 scsi_mq_done+0xf0/0x200 virtscsi_vq_done+0xbc/0x150 vring_interrupt+0x179/0x390 __handle_irq_event_percpu+0xf7/0x490 handle_irq_event_percpu+0x7b/0x160 handle_irq_event+0xcc/0x170 handle_edge_irq+0x215/0xb20 common_interrupt+0x60/0x120 asm_common_interrupt+0x1e/0x40 Fix this by move BIO_THROTTLED set into the queue_lock.

In the Linux kernel, the following vulnerability has been resolved: srcu: Tighten cleanup_srcu_struct() GP checks Currently, cleanup_srcu_struct() checks for a grace period in progress, but it does not check for a grace period that has not yet started but which might start at any time. Such a situation could result in a use-after-free bug, so this commit adds a check for a grace period that is needed but not yet started to cleanup_srcu_struct().

In the Linux kernel, the following vulnerability has been resolved: blk-mq: don't touch ->tagset in blk_mq_get_sq_hctx blk_mq_run_hw_queues() could be run when there isn't queued request and after queue is cleaned up, at that time tagset is freed, because tagset lifetime is covered by driver, and often freed after blk_cleanup_queue() returns. So don't touch ->tagset for figuring out current default hctx by the mapping built in request queue, so use-after-free on tagset can be avoided. Meantime this way should be fast than retrieving mapping from tagset.

In the Linux kernel, the following vulnerability has been resolved: driver: base: fix UAF when driver_attach failed When driver_attach(drv); failed, the driver_private will be freed. But it has been added to the bus, which caused a UAF. To fix it, we need to delete it from the bus when failed.

In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential double free during failed mount RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=2088799

In the Linux kernel, the following vulnerability has been resolved: bfq: Avoid merging queues with different parents It can happen that the parent of a bfqq changes between the moment we decide two queues are worth to merge (and set bic->stable_merge_bfqq) and the moment bfq_setup_merge() is called. This can happen e.g. because the process submitted IO for a different cgroup and thus bfqq got reparented. It can even happen that the bfqq we are merging with has parent cgroup that is already offline and going to be destroyed in which case the merge can lead to use-after-free issues such as: BUG: KASAN: use-after-free in __bfq_deactivate_entity+0x9cb/0xa50 Read of size 8 at addr ffff88800693c0c0 by task runc:[2:INIT]/10544 CPU: 0 PID: 10544 Comm: runc:[2:INIT] Tainted: G E 5.15.2-0.g5fb85fd-default #1 openSUSE Tumbleweed (unreleased) f1f3b891c72369aebecd2e43e4641a6358867c70 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x46/0x5a print_address_description.constprop.0+0x1f/0x140 ? __bfq_deactivate_entity+0x9cb/0xa50 kasan_report.cold+0x7f/0x11b ? __bfq_deactivate_entity+0x9cb/0xa50 __bfq_deactivate_entity+0x9cb/0xa50 ? update_curr+0x32f/0x5d0 bfq_deactivate_entity+0xa0/0x1d0 bfq_del_bfqq_busy+0x28a/0x420 ? resched_curr+0x116/0x1d0 ? bfq_requeue_bfqq+0x70/0x70 ? check_preempt_wakeup+0x52b/0xbc0 __bfq_bfqq_expire+0x1a2/0x270 bfq_bfqq_expire+0xd16/0x2160 ? try_to_wake_up+0x4ee/0x1260 ? bfq_end_wr_async_queues+0xe0/0xe0 ? _raw_write_unlock_bh+0x60/0x60 ? _raw_spin_lock_irq+0x81/0xe0 bfq_idle_slice_timer+0x109/0x280 ? bfq_dispatch_request+0x4870/0x4870 __hrtimer_run_queues+0x37d/0x700 ? enqueue_hrtimer+0x1b0/0x1b0 ? kvm_clock_get_cycles+0xd/0x10 ? ktime_get_update_offsets_now+0x6f/0x280 hrtimer_interrupt+0x2c8/0x740 Fix the problem by checking that the parent of the two bfqqs we are merging in bfq_setup_merge() is the same.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix use-after-free for dynamic ftrace_ops KASAN reported a use-after-free with ftrace ops [1]. It was found from vmcore that perf had registered two ops with the same content successively, both dynamic. After unregistering the second ops, a use-after-free occurred. In ftrace_shutdown(), when the second ops is unregistered, the FTRACE_UPDATE_CALLS command is not set because there is another enabled ops with the same content. Also, both ops are dynamic and the ftrace callback function is ftrace_ops_list_func, so the FTRACE_UPDATE_TRACE_FUNC command will not be set. Eventually the value of 'command' will be 0 and ftrace_shutdown() will skip the rcu synchronization. However, ftrace may be activated. When the ops is released, another CPU may be accessing the ops. Add the missing synchronization to fix this problem. [1] BUG: KASAN: use-after-free in __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline] BUG: KASAN: use-after-free in ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049 Read of size 8 at addr ffff56551965bbc8 by task syz-executor.2/14468 CPU: 1 PID: 14468 Comm: syz-executor.2 Not tainted 5.10.0 #7 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x40c arch/arm64/kernel/stacktrace.c:132 show_stack+0x30/0x40 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b4/0x248 lib/dump_stack.c:118 print_address_description.constprop.0+0x28/0x48c mm/kasan/report.c:387 __kasan_report mm/kasan/report.c:547 [inline] kasan_report+0x118/0x210 mm/kasan/report.c:564 check_memory_region_inline mm/kasan/generic.c:187 [inline] __asan_load8+0x98/0xc0 mm/kasan/generic.c:253 __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline] ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049 ftrace_graph_call+0x0/0x4 __might_sleep+0x8/0x100 include/linux/perf_event.h:1170 __might_fault mm/memory.c:5183 [inline] __might_fault+0x58/0x70 mm/memory.c:5171 do_strncpy_from_user lib/strncpy_from_user.c:41 [inline] strncpy_from_user+0x1f4/0x4b0 lib/strncpy_from_user.c:139 getname_flags+0xb0/0x31c fs/namei.c:149 getname+0x2c/0x40 fs/namei.c:209 [...] Allocated by task 14445: kasan_save_stack+0x24/0x50 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:479 [inline] __kasan_kmalloc.constprop.0+0x110/0x13c mm/kasan/common.c:449 kasan_kmalloc+0xc/0x14 mm/kasan/common.c:493 kmem_cache_alloc_trace+0x440/0x924 mm/slub.c:2950 kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:675 [inline] perf_event_alloc.part.0+0xb4/0x1350 kernel/events/core.c:11230 perf_event_alloc kernel/events/core.c:11733 [inline] __do_sys_perf_event_open kernel/events/core.c:11831 [inline] __se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723 __arm64_sys_perf_event_open+0x6c/0x80 kernel/events/core.c:11723 [...] Freed by task 14445: kasan_save_stack+0x24/0x50 mm/kasan/common.c:48 kasan_set_track+0x24/0x34 mm/kasan/common.c:56 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:358 __kasan_slab_free.part.0+0x11c/0x1b0 mm/kasan/common.c:437 __kasan_slab_free mm/kasan/common.c:445 [inline] kasan_slab_free+0x2c/0x40 mm/kasan/common.c:446 slab_free_hook mm/slub.c:1569 [inline] slab_free_freelist_hook mm/slub.c:1608 [inline] slab_free mm/slub.c:3179 [inline] kfree+0x12c/0xc10 mm/slub.c:4176 perf_event_alloc.part.0+0xa0c/0x1350 kernel/events/core.c:11434 perf_event_alloc kernel/events/core.c:11733 [inline] __do_sys_perf_event_open kernel/events/core.c:11831 [inline] __se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723 [...]

Use-after-free vulnerability in the Linux kernel exploitable by a local attacker due to reuse of a DCCP socket with an attached dccps_hc_tx_ccid object as a listener after being released. Fixed in Ubuntu Linux kernel 5.4.0-51.56, 5.3.0-68.63, 4.15.0-121.123, 4.4.0-193.224, 3.13.0.182.191 and 3.2.0-149.196.

The dccp_rcv_state_process function in net/dccp/input.c in the Linux kernel through 4.9.11 mishandles DCCP_PKT_REQUEST packet data structures in the LISTEN state, which allows local users to obtain root privileges or cause a denial of service (double free) via an application that makes an IPV6_RECVPKTINFO setsockopt system call.

In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_tx_handler(): fix use after free of skb can_put_echo_skb() will clone skb then free the skb. Move the can_put_echo_skb() for the m_can version 3.0.x directly before the start of the xmit in hardware, similar to the 3.1.x branch.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccree - Fix use after free in cc_cipher_exit() kfree_sensitive(ctx_p->user.key) will free the ctx_p->user.key. But ctx_p->user.key is still used in the next line, which will lead to a use after free. We can call kfree_sensitive() after dev_dbg() to avoid the uaf.

The Linux kernel before 5.11.14 has a use-after-free in cipso_v4_genopt in net/ipv4/cipso_ipv4.c because the CIPSO and CALIPSO refcounting for the DOI definitions is mishandled, aka CID-ad5d07f4a9cd. This leads to writing an arbitrary value.

artswrapper in aRts, when running setuid root on Linux 2.6.0 or later versions, does not check the return value of the setuid function call, which allows local users to gain root privileges by causing setuid to fail, which prevents artsd from dropping privileges.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix double increment of client_count in dma_chan_get() The first time dma_chan_get() is called for a channel the channel client_count is incorrectly incremented twice for public channels, first in balance_ref_count(), and again prior to returning. This results in an incorrect client count which will lead to the channel resources not being freed when they should be. A simple test of repeated module load and unload of async_tx on a Dell Power Edge R7425 also shows this resulting in a kref underflow warning. [ 124.329662] async_tx: api initialized (async) [ 129.000627] async_tx: api initialized (async) [ 130.047839] ------------[ cut here ]------------ [ 130.052472] refcount_t: underflow; use-after-free. [ 130.057279] WARNING: CPU: 3 PID: 19364 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 [ 130.065811] Modules linked in: async_tx(-) rfkill intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd ipmi_ssif kvm_amd dcdbas kvm mgag200 drm_shmem_helper acpi_ipmi irqbypass drm_kms_helper ipmi_si syscopyarea sysfillrect rapl pcspkr ipmi_devintf sysimgblt fb_sys_fops k10temp i2c_piix4 ipmi_msghandler acpi_power_meter acpi_cpufreq vfat fat drm fuse xfs libcrc32c sd_mod t10_pi sg ahci crct10dif_pclmul libahci crc32_pclmul crc32c_intel ghash_clmulni_intel igb megaraid_sas i40e libata i2c_algo_bit ccp sp5100_tco dca dm_mirror dm_region_hash dm_log dm_mod [last unloaded: async_tx] [ 130.117361] CPU: 3 PID: 19364 Comm: modprobe Kdump: loaded Not tainted 5.14.0-185.el9.x86_64 #1 [ 130.126091] Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.18.0 01/17/2022 [ 130.133806] RIP: 0010:refcount_warn_saturate+0xba/0x110 [ 130.139041] Code: 01 01 e8 6d bd 55 00 0f 0b e9 72 9d 8a 00 80 3d 26 18 9c 01 00 75 85 48 c7 c7 f8 a3 03 9d c6 05 16 18 9c 01 01 e8 4a bd 55 00 <0f> 0b e9 4f 9d 8a 00 80 3d 01 18 9c 01 00 0f 85 5e ff ff ff 48 c7 [ 130.157807] RSP: 0018:ffffbf98898afe68 EFLAGS: 00010286 [ 130.163036] RAX: 0000000000000000 RBX: ffff9da06028e598 RCX: 0000000000000000 [ 130.170172] RDX: ffff9daf9de26480 RSI: ffff9daf9de198a0 RDI: ffff9daf9de198a0 [ 130.177316] RBP: ffff9da7cddf3970 R08: 0000000000000000 R09: 00000000ffff7fff [ 130.184459] R10: ffffbf98898afd00 R11: ffffffff9d9e8c28 R12: ffff9da7cddf1970 [ 130.191596] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 130.198739] FS: 00007f646435c740(0000) GS:ffff9daf9de00000(0000) knlGS:0000000000000000 [ 130.206832] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 130.212586] CR2: 00007f6463b214f0 CR3: 00000008ab98c000 CR4: 00000000003506e0 [ 130.219729] Call Trace: [ 130.222192] <TASK> [ 130.224305] dma_chan_put+0x10d/0x110 [ 130.227988] dmaengine_put+0x7a/0xa0 [ 130.231575] __do_sys_delete_module.constprop.0+0x178/0x280 [ 130.237157] ? syscall_trace_enter.constprop.0+0x145/0x1d0 [ 130.242652] do_syscall_64+0x5c/0x90 [ 130.246240] ? exc_page_fault+0x62/0x150 [ 130.250178] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 130.255243] RIP: 0033:0x7f6463a3f5ab [ 130.258830] Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48 [ 130.277591] RSP: 002b:00007fff22f972c8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 130.285164] RAX: ffffffffffffffda RBX: 000055b6786edd40 RCX: 00007f6463a3f5ab [ 130.292303] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055b6786edda8 [ 130.299443] RBP: 000055b6786edd40 R08: 0000000000000000 R09: 0000000000000000 [ 130.306584] R10: 00007f6463b9eac0 R11: 0000000000000206 R12: 000055b6786edda8 [ 130.313731] R13: 0000000000000000 R14: 000055b6786edda8 R15: 00007fff22f995f8 [ 130.320875] </TASK> [ 130.323081] ---[ end trace eff7156d56b5cf25 ]--- cat /sys/class/dma/dma0chan*/in_use would get the wrong result. 2 2 2 Test-by: Jie Hai <haijie1@huawei.com>

In the Linux kernel, the following vulnerability has been resolved: e100: Fix possible use after free in e100_xmit_prepare In e100_xmit_prepare(), if we can't map the skb, then return -ENOMEM, so e100_xmit_frame() will return NETDEV_TX_BUSY and the upper layer will resend the skb. But the skb is already freed, which will cause UAF bug when the upper layer resends the skb. Remove the harmful free.

Insecure permissions in Nakivo Backup & Replication Director version 9.4.0.r43656 on Linux allow local users to access the Nakivo Director web interface and gain root privileges. This occurs because the database containing the users of the web application and the password-recovery secret value is readable.

In the Linux kernel, the following vulnerability has been resolved: ep93xx: clock: Fix UAF in ep93xx_clk_register_gate() arch/arm/mach-ep93xx/clock.c:154:2: warning: Use of memory after it is freed [clang-analyzer-unix.Malloc] arch/arm/mach-ep93xx/clock.c:151:2: note: Taking true branch if (IS_ERR(clk)) ^ arch/arm/mach-ep93xx/clock.c:152:3: note: Memory is released kfree(psc); ^~~~~~~~~~ arch/arm/mach-ep93xx/clock.c:154:2: note: Use of memory after it is freed return &psc->hw; ^ ~~~~~~~~

The futex_requeue function in kernel/futex.c in the Linux kernel through 3.14.5 does not ensure that calls have two different futex addresses, which allows local users to gain privileges via a crafted FUTEX_REQUEUE command that facilitates unsafe waiter modification.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix use-after-free Read in tipc_named_reinit syzbot found the following issue on: ================================================================== BUG: KASAN: use-after-free in tipc_named_reinit+0x94f/0x9b0 net/tipc/name_distr.c:413 Read of size 8 at addr ffff88805299a000 by task kworker/1:9/23764 CPU: 1 PID: 23764 Comm: kworker/1:9 Not tainted 5.18.0-rc4-syzkaller-00878-g17d49e6e8012 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events tipc_net_finalize_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xeb/0x495 mm/kasan/report.c:313 print_report mm/kasan/report.c:429 [inline] kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491 tipc_named_reinit+0x94f/0x9b0 net/tipc/name_distr.c:413 tipc_net_finalize+0x234/0x3d0 net/tipc/net.c:138 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 </TASK> [...] ================================================================== In the commit d966ddcc3821 ("tipc: fix a deadlock when flushing scheduled work"), the cancel_work_sync() function just to make sure ONLY the work tipc_net_finalize_work() is executing/pending on any CPU completed before tipc namespace is destroyed through tipc_exit_net(). But this function is not guaranteed the work is the last queued. So, the destroyed instance may be accessed in the work which will try to enqueue later. In order to completely fix, we re-order the calling of cancel_work_sync() to make sure the work tipc_net_finalize_work() was last queued and it must be completed by calling cancel_work_sync().

In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Fix use-after-free in snd_soc_exit() KASAN reports a use-after-free: BUG: KASAN: use-after-free in device_del+0xb5b/0xc60 Read of size 8 at addr ffff888008655050 by task rmmod/387 CPU: 2 PID: 387 Comm: rmmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl+0x79/0x9a print_report+0x17f/0x47b kasan_report+0xbb/0xf0 device_del+0xb5b/0xc60 platform_device_del.part.0+0x24/0x200 platform_device_unregister+0x2e/0x40 snd_soc_exit+0xa/0x22 [snd_soc_core] __do_sys_delete_module.constprop.0+0x34f/0x5b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> It's bacause in snd_soc_init(), snd_soc_util_init() is possble to fail, but its ret is ignored, which makes soc_dummy_dev unregistered twice. snd_soc_init() snd_soc_util_init() platform_device_register_simple(soc_dummy_dev) platform_driver_register() # fail platform_device_unregister(soc_dummy_dev) platform_driver_register() # success ... snd_soc_exit() snd_soc_util_exit() # soc_dummy_dev will be unregistered for second time To fix it, handle error and stop snd_soc_init() when util_init() fail. Also clean debugfs when util_init() or driver_register() fail.

In the Linux kernel, the following vulnerability has been resolved: ASoC: rt5645: Fix errorenous cleanup order There is a logic error when removing rt5645 device as the function rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and delete the &rt5645->btn_check_timer latter. However, since the timer handler rt5645_btn_check_callback() will re-queue the jack_detect_work, this cleanup order is buggy. That is, once the del_timer_sync in rt5645_i2c_remove is concurrently run with the rt5645_btn_check_callback, the canceled jack_detect_work will be rescheduled again, leading to possible use-after-free. This patch fix the issue by placing the del_timer_sync function before the cancel_delayed_work_sync.

In the Linux kernel, the following vulnerability has been resolved: block: disable the elevator int del_gendisk The elevator is only used for file system requests, which are stopped in del_gendisk. Move disabling the elevator and freeing the scheduler tags to the end of del_gendisk instead of doing that work in disk_release and blk_cleanup_queue to avoid a use after free on q->tag_set from disk_release as the tag_set might not be alive at that point. Move the blk_qos_exit call as well, as it just depends on the elevator exit and would be the only reason to keep the not exactly cheap queue freeze in disk_release.

Local privilege escalation due to improper soft link handling. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 29051.

Certain WithSecure products allow Local privilege escalation via the lhz archive unpack handler. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, Linux Security 64 12.0 , Linux Protection 12.0, and WithSecure Atlant (formerly F-Secure Atlant) 1.0.35-1.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait While performing fast composition switch, there is a possibility that the process of ffs_ep0_write/ffs_ep0_read get into a race condition due to ep0req being freed up from functionfs_unbind. Consider the scenario that the ffs_ep0_write calls the ffs_ep0_queue_wait by taking a lock &ffs->ev.waitq.lock. However, the functionfs_unbind isn't bounded so it can go ahead and mark the ep0req to NULL, and since there is no NULL check in ffs_ep0_queue_wait we will end up in use-after-free. Fix this by making a serialized execution between the two functions using a mutex_lock(ffs->mutex).

A flaw was found in the Linux kernel’s futex implementation. This flaw allows a local attacker to corrupt system memory or escalate their privileges when creating a futex on a filesystem that is about to be unmounted. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.

A vulnerability in the ClearPass OnGuard Linux agent could allow malicious users on a Linux instance to elevate their user privileges to those of a higher role. A successful exploit allows malicious users to execute arbitrary code with root level privileges on the Linux instance.

A code injection vulnerability in Trend Micro Deep Security and Cloud One - Workload Security Agent for Linux version 20 and below could allow an attacker to escalate privileges and run arbitrary code in the context of root. Please note: an attacker must first obtain access to the target agent in an un-activated and unconfigured state in order to exploit this vulnerability.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Fix use-after-free bug for mm struct Under certain conditions, such as MPI_Abort, the hfi1 cleanup code may represent the last reference held on the task mm. hfi1_mmu_rb_unregister() then drops the last reference and the mm is freed before the final use in hfi1_release_user_pages(). A new task may allocate the mm structure while it is still being used, resulting in problems. One manifestation is corruption of the mmap_sem counter leading to a hang in down_write(). Another is corruption of an mm struct that is in use by another task.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use after free in hci_send_acl This fixes the following trace caused by receiving HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without first checking if conn->type is in fact AMP_LINK and in case it is do properly cleanup upper layers with hci_disconn_cfm: ================================================================== BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50 Read of size 8 at addr ffff88800e404818 by task bluetoothd/142 CPU: 0 PID: 142 Comm: bluetoothd Not tainted 5.17.0-rc5-00006-gda4022eeac1a #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x150 kasan_report.cold+0x7f/0x11b hci_send_acl+0xaba/0xc50 l2cap_do_send+0x23f/0x3d0 l2cap_chan_send+0xc06/0x2cc0 l2cap_sock_sendmsg+0x201/0x2b0 sock_sendmsg+0xdc/0x110 sock_write_iter+0x20f/0x370 do_iter_readv_writev+0x343/0x690 do_iter_write+0x132/0x640 vfs_writev+0x198/0x570 do_writev+0x202/0x280 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015 RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77 R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580 RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001 </TASK> R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0 Allocated by task 45: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 hci_chan_create+0x9a/0x2f0 l2cap_conn_add.part.0+0x1a/0xdc0 l2cap_connect_cfm+0x236/0x1000 le_conn_complete_evt+0x15a7/0x1db0 hci_le_conn_complete_evt+0x226/0x2c0 hci_le_meta_evt+0x247/0x450 hci_event_packet+0x61b/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 Freed by task 45: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0xfb/0x130 kfree+0xac/0x350 hci_conn_cleanup+0x101/0x6a0 hci_conn_del+0x27e/0x6c0 hci_disconn_phylink_complete_evt+0xe0/0x120 hci_event_packet+0x812/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff88800c0f0500 The buggy address is located 24 bytes inside of which belongs to the cache kmalloc-128 of size 128 The buggy address belongs to the page: 128-byte region [ffff88800c0f0500, ffff88800c0f0580) flags: 0x100000000000200(slab|node=0|zone=1) page:00000000fe45cd86 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xc0f0 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 raw: 0100000000000200 ffffea00003a2c80 dead000000000004 ffff8880078418c0 page dumped because: kasan: bad access detected ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc Memory state around the buggy address: >ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ---truncated---

An array indexing vulnerability was found in the netfilter subsystem of the Linux kernel. A missing macro could lead to a miscalculation of the `h->nets` array offset, providing attackers with the primitive to arbitrarily increment/decrement a memory buffer out-of-bound. This issue may allow a local user to crash the system or potentially escalate their privileges on the system.

An issue was discovered in the Linux kernel before 5.6.5. There is a use-after-free in block/bfq-iosched.c related to bfq_idle_slice_timer_body.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: add vlan list lock to protect vlan list When adding port base VLAN, vf VLAN need to remove from HW and modify the vlan state in vf VLAN list as false. If the periodicity task is freeing the same node, it may cause "use after free" error. This patch adds a vlan list lock to protect the vlan list.

In the Linux kernel, the following vulnerability has been resolved: net: sched: Fix use after free in red_enqueue() We can't use "skb" again after passing it to qdisc_enqueue(). This is basically identical to commit 2f09707d0c97 ("sch_sfb: Also store skb len before calling child enqueue").

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix race on unaccepted mptcp sockets When the listener socket owning the relevant request is closed, it frees the unaccepted subflows and that causes later deletion of the paired MPTCP sockets. The mptcp socket's worker can run in the time interval between such delete operations. When that happens, any access to msk->first will cause an UaF access, as the subflow cleanup did not cleared such field in the mptcp socket. Address the issue explicitly traversing the listener socket accept queue at close time and performing the needed cleanup on the pending msk. Note that the locking is a bit tricky, as we need to acquire the msk socket lock, while still owning the subflow socket one.

In the Linux kernel, the following vulnerability has been resolved: pps: Fix a use-after-free On a board running ntpd and gpsd, I'm seeing a consistent use-after-free in sys_exit() from gpsd when rebooting: pps pps1: removed ------------[ cut here ]------------ kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called. WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150 CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1 Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kobject_put+0x120/0x150 lr : kobject_put+0x120/0x150 sp : ffffffc0803d3ae0 x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001 x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440 x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600 x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20 x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: kobject_put+0x120/0x150 cdev_put+0x20/0x3c __fput+0x2c4/0x2d8 ____fput+0x1c/0x38 task_work_run+0x70/0xfc do_exit+0x2a0/0x924 do_group_exit+0x34/0x90 get_signal+0x7fc/0x8c0 do_signal+0x128/0x13b4 do_notify_resume+0xdc/0x160 el0_svc+0xd4/0xf8 el0t_64_sync_handler+0x140/0x14c el0t_64_sync+0x190/0x194 ---[ end trace 0000000000000000 ]--- ...followed by more symptoms of corruption, with similar stacks: refcount_t: underflow; use-after-free. kernel BUG at lib/list_debug.c:62! Kernel panic - not syncing: Oops - BUG: Fatal exception This happens because pps_device_destruct() frees the pps_device with the embedded cdev immediately after calling cdev_del(), but, as the comment above cdev_del() notes, fops for previously opened cdevs are still callable even after cdev_del() returns. I think this bug has always been there: I can't explain why it suddenly started happening every time I reboot this particular board. In commit d953e0e837e6 ("pps: Fix a use-after free bug when unregistering a source."), George Spelvin suggested removing the embedded cdev. That seems like the simplest way to fix this, so I've implemented his suggestion, using __register_chrdev() with pps_idr becoming the source of truth for which minor corresponds to which device. But now that pps_idr defines userspace visibility instead of cdev_add(), we need to be sure the pps->dev refcount can't reach zero while userspace can still find it again. So, the idr_remove() call moves to pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev. pps_core: source serial1 got cdev (251:1) <...> pps pps1: removed pps_core: unregistering pps1 pps_core: deallocating pps1

In the Linux kernel, the following vulnerability has been resolved: erofs: fix buffer copy overflow of ztailpacking feature I got some KASAN report as below: [ 46.959738] ================================================================== [ 46.960430] BUG: KASAN: use-after-free in z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] Read of size 4074 at addr ffff8880300c2f8e by task fssum/188 ... [ 46.960430] Call Trace: [ 46.960430] <TASK> [ 46.960430] dump_stack_lvl+0x41/0x5e [ 46.960430] print_report.cold+0xb2/0x6b7 [ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] kasan_report+0x8a/0x140 [ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] kasan_check_range+0x14d/0x1d0 [ 46.960430] memcpy+0x20/0x60 [ 46.960430] z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] z_erofs_decompress_pcluster+0xaae/0x1080 The root cause is that the tail pcluster won't be a complete filesystem block anymore. So if ztailpacking is used, the second part of an uncompressed tail pcluster may not be ``rq->pageofs_out``.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: mtk_scp: Fix a potential double free 'scp->rproc' is allocated using devm_rproc_alloc(), so there is no need to free it explicitly in the remove function.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent hw_params and hw_free calls Currently we have neither proper check nor protection against the concurrent calls of PCM hw_params and hw_free ioctls, which may result in a UAF. Since the existing PCM stream lock can't be used for protecting the whole ioctl operations, we need a new mutex to protect those racy calls. This patch introduced a new mutex, runtime->buffer_mutex, and applies it to both hw_params and hw_free ioctl code paths. Along with it, the both functions are slightly modified (the mmap_count check is moved into the state-check block) for code simplicity.

In the Linux kernel, the following vulnerability has been resolved: net: atlantic: eliminate double free in error handling logic Driver has a logic leak in ring data allocation/free, where aq_ring_free could be called multiple times on same ring, if system is under stress and got memory allocation error. Ring pointer was used as an indicator of failure, but this is not correct since only ring data is allocated/deallocated. Ring itself is an array member. Changing ring allocation functions to return error code directly. This simplifies error handling and eliminates aq_ring_free on higher layer.

A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. Due to a race condition between nf_tables netlink control plane transaction and nft_set element garbage collection, it is possible to underflow the reference counter causing a use-after-free vulnerability. We recommend upgrading past commit 3e91b0ebd994635df2346353322ac51ce84ce6d8.

In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix use after free on context disconnection Upon module load, a kthread is created targeting the pvr2_context_thread_func function, which may call pvr2_context_destroy and thus call kfree() on the context object. However, that might happen before the usb hub_event handler is able to notify the driver. This patch adds a sanity check before the invalid read reported by syzbot, within the context disconnection call stack.