In the Linux kernel, the following vulnerability has been resolved: video: screen_info: Relocate framebuffers behind PCI bridges Apply PCI host-bridge window offsets to screen_info framebuffers. Fixes invalid access to I/O memory. Resources behind a PCI host bridge can be relocated by a certain offset in the kernel's CPU address range used for I/O. The framebuffer memory range stored in screen_info refers to the CPU addresses as seen during boot (where the offset is 0). During boot up, firmware may assign a different memory offset to the PCI host bridge and thereby relocating the framebuffer address of the PCI graphics device as seen by the kernel. The information in screen_info must be updated as well. The helper pcibios_bus_to_resource() performs the relocation of the screen_info's framebuffer resource (given in PCI bus addresses). The result matches the I/O-memory resource of the PCI graphics device (given in CPU addresses). As before, we store away the information necessary to later update the information in screen_info itself. Commit 78aa89d1dfba ("firmware/sysfb: Update screen_info for relocated EFI framebuffers") added the code for updating screen_info. It is based on similar functionality that pre-existed in efifb. Efifb uses a pointer to the PCI resource, while the newer code does a memcpy of the region. Hence efifb sees any updates to the PCI resource and avoids the issue. v3: - Only use struct pci_bus_region for PCI bus addresses (Bjorn) - Clarify address semantics in commit messages and comments (Bjorn) v2: - Fixed tags (Takashi, Ivan) - Updated information on efifb

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix leaks in probe These two error paths should clean up before returning.

In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix memory leak in prestera_rxtx_switch_init() When prestera_sdma_switch_init() failed, the memory pointed to by sw->rxtx isn't released. Fix it. Only be compiled, not be tested.

In the Linux kernel, the following vulnerability has been resolved: tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd() test_gen_kprobe_cmd() only free buf in fail path, hence buf will leak when there is no failure. Move kfree(buf) from fail path to common path to prevent the memleak. The same reason and solution in test_gen_kretprobe_cmd(). unreferenced object 0xffff888143b14000 (size 2048): comm "insmod", pid 52490, jiffies 4301890980 (age 40.553s) hex dump (first 32 bytes): 70 3a 6b 70 72 6f 62 65 73 2f 67 65 6e 5f 6b 70 p:kprobes/gen_kp 72 6f 62 65 5f 74 65 73 74 20 64 6f 5f 73 79 73 robe_test do_sys backtrace: [<000000006d7b836b>] kmalloc_trace+0x27/0xa0 [<0000000009528b5b>] 0xffffffffa059006f [<000000008408b580>] do_one_initcall+0x87/0x2a0 [<00000000c4980a7e>] do_init_module+0xdf/0x320 [<00000000d775aad0>] load_module+0x3006/0x3390 [<00000000e9a74b80>] __do_sys_finit_module+0x113/0x1b0 [<000000003726480d>] do_syscall_64+0x35/0x80 [<000000003441e93b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp: fix struct clk leak on probe errors Make sure to release the pipe clock reference in case of a late probe error (e.g. probe deferral).

In the Linux kernel, the following vulnerability has been resolved: net: phy: mscc: Fix memory leak when using one step timestamping Fix memory leak when running one-step timestamping. When running one-step sync timestamping, the HW is configured to insert the TX time into the frame, so there is no reason to keep the skb anymore. As in this case the HW will never generate an interrupt to say that the frame was timestamped, then the frame will never released. Fix this by freeing the frame in case of one-step timestamping.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to obtain the wwan power state configuration from BIOS but is not freeing the acpi_object. The acpi_evaluate_dsm() returned acpi_object to be freed. Free the acpi_object after use.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: fix potential memleak in 'add_widget_node' As 'kobject_add' may allocated memory for 'kobject->name' when return error. And in this function, if call 'kobject_add' failed didn't free kobject. So call 'kobject_put' to recycling resources.

In the Linux kernel, the following vulnerability has been resolved: hugetlbfs: don't delete error page from pagecache This change is very similar to the change that was made for shmem [1], and it solves the same problem but for HugeTLBFS instead. Currently, when poison is found in a HugeTLB page, the page is removed from the page cache. That means that attempting to map or read that hugepage in the future will result in a new hugepage being allocated instead of notifying the user that the page was poisoned. As [1] states, this is effectively memory corruption. The fix is to leave the page in the page cache. If the user attempts to use a poisoned HugeTLB page with a syscall, the syscall will fail with EIO, the same error code that shmem uses. For attempts to map the page, the thread will get a BUS_MCEERR_AR SIGBUS. [1]: commit a76054266661 ("mm: shmem: don't truncate page if memory failure happens")

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix memory leak on the deferred close xfstests on smb21 report kmemleak as below: unreferenced object 0xffff8881767d6200 (size 64): comm "xfs_io", pid 1284, jiffies 4294777434 (age 20.789s) hex dump (first 32 bytes): 80 5a d0 11 81 88 ff ff 78 8a aa 63 81 88 ff ff .Z......x..c.... 00 71 99 76 81 88 ff ff 00 00 00 00 00 00 00 00 .q.v............ backtrace: [<00000000ad04e6ea>] cifs_close+0x92/0x2c0 [<0000000028b93c82>] __fput+0xff/0x3f0 [<00000000d8116851>] task_work_run+0x85/0xc0 [<0000000027e14f9e>] do_exit+0x5e5/0x1240 [<00000000fb492b95>] do_group_exit+0x58/0xe0 [<00000000129a32d9>] __x64_sys_exit_group+0x28/0x30 [<00000000e3f7d8e9>] do_syscall_64+0x35/0x80 [<00000000102e8a0b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 When cancel the deferred close work, we should also cleanup the struct cifs_deferred_close.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Release rproc->clean_table after rproc_attach() fails When rproc->state = RPROC_DETACHED is attached to remote processor through rproc_attach(), if rproc_handle_resources() returns failure, then the clean table should be released, otherwise the following memory leak will occur. unreferenced object 0xffff000086a99800 (size 1024): comm "kworker/u12:3", pid 59, jiffies 4294893670 (age 121.140s) hex dump (first 32 bytes): 00 00 00 00 00 80 00 00 00 00 00 00 00 00 10 00 ............ 00 00 00 00 00 00 08 00 00 00 00 00 00 00 00 00 ............ backtrace: [<000000008bbe4ca8>] slab_post_alloc_hook+0x98/0x3fc [<000000003b8a272b>] __kmem_cache_alloc_node+0x13c/0x230 [<000000007a507c51>] __kmalloc_node_track_caller+0x5c/0x260 [<0000000037818dae>] kmemdup+0x34/0x60 [<00000000610f7f57>] rproc_boot+0x35c/0x56c [<0000000065f8871a>] rproc_add+0x124/0x17c [<00000000497416ee>] imx_rproc_probe+0x4ec/0x5d4 [<000000003bcaa37d>] platform_probe+0x68/0xd8 [<00000000771577f9>] really_probe+0x110/0x27c [<00000000531fea59>] __driver_probe_device+0x78/0x12c [<0000000080036a04>] driver_probe_device+0x3c/0x118 [<000000007e0bddcb>] __device_attach_driver+0xb8/0xf8 [<000000000cf1fa33>] bus_for_each_drv+0x84/0xe4 [<000000001a53b53e>] __device_attach+0xfc/0x18c [<00000000d1a2a32c>] device_initial_probe+0x14/0x20 [<00000000d8f8b7ae>] bus_probe_device+0xb0/0xb4 unreferenced object 0xffff0000864c9690 (size 16):

In the Linux kernel, the following vulnerability has been resolved: mxser: fix xmit_buf leak in activate when LSR == 0xff When LSR is 0xff in ->activate() (rather unlike), we return an error. Provided ->shutdown() is not called when ->activate() fails, nothing actually frees the buffer in this case. Fix this by properly freeing the buffer in a designated label. We jump there also from the "!info->type" if now too.

In the Linux kernel, the following vulnerability has been resolved: bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem The vmemmap pages is marked by kmemleak when allocated from memblock. Remove it from kmemleak when freeing the page. Otherwise, when we reuse the page, kmemleak may report such an error and then stop working. kmemleak: Cannot insert 0xffff98fb6eab3d40 into the object search tree (overlaps existing) kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff98fb6be00000 (size 335544320): kmemleak: comm "swapper", pid 0, jiffies 4294892296 kmemleak: min_count = 0 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace:

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix possible memory leak when failing to issue CMF WQE There is no corresponding free routine if lpfc_sli4_issue_wqe fails to issue the CMF WQE in lpfc_issue_cmf_sync_wqe. If ret_val is non-zero, then free the iocbq request structure.

In the Linux kernel, the following vulnerability has been resolved: x86/MCE/AMD: Fix memory leak when threshold_create_bank() fails In mce_threshold_create_device(), if threshold_create_bank() fails, the previously allocated threshold banks array @bp will be leaked because the call to mce_threshold_remove_device() will not free it. This happens because mce_threshold_remove_device() fetches the pointer through the threshold_banks per-CPU variable but bp is written there only after the bank creation is successful, and not before, when threshold_create_bank() fails. Add a helper which unwinds all the bank creation work previously done and pass into it the previously allocated threshold banks array for freeing. [ bp: Massage. ]

In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus() If device_register() fails in tcm_loop_setup_hba_bus(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(). The 'tl_hba' will be freed in tcm_loop_release_adapter(), so it don't need goto error label in this case.

In the Linux kernel, the following vulnerability has been resolved: netlink: Fix wraparounds of sk->sk_rmem_alloc. Netlink has this pattern in some places if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf) atomic_add(skb->truesize, &sk->sk_rmem_alloc); , which has the same problem fixed by commit 5a465a0da13e ("udp: Fix multiple wraparounds of sk->sk_rmem_alloc."). For example, if we set INT_MAX to SO_RCVBUFFORCE, the condition is always false as the two operands are of int. Then, a single socket can eat as many skb as possible until OOM happens, and we can see multiple wraparounds of sk->sk_rmem_alloc. Let's fix it by using atomic_add_return() and comparing the two variables as unsigned int. Before: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port -1668710080 0 rtnl:nl_wraparound/293 * After: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port 2147483072 0 rtnl:nl_wraparound/290 * ^ `--- INT_MAX - 576

In the Linux kernel, the following vulnerability has been resolved: mm/damon/reclaim: fix potential memory leak in damon_reclaim_init() damon_reclaim_init() allocates a memory chunk for ctx with damon_new_ctx(). When damon_select_ops() fails, ctx is not released, which will lead to a memory leak. We should release the ctx with damon_destroy_ctx() when damon_select_ops() fails to fix the memory leak.

In the Linux kernel, the following vulnerability has been resolved: jffs2: fix memory leak in jffs2_scan_medium If an error is returned in jffs2_scan_eraseblock() and some memory has been added to the jffs2_summary *s, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff88812b889c40 (size 64): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): 40 48 b5 14 81 88 ff ff 01 e0 31 00 00 00 50 00 @H........1...P. 00 00 01 00 00 00 01 00 00 00 02 00 00 00 09 08 ................ backtrace: [<ffffffffae93a3a3>] __kmalloc+0x613/0x910 [<ffffffffaf423b9c>] jffs2_sum_add_dirent_mem+0x5c/0xa0 [<ffffffffb0f3afa8>] jffs2_scan_medium.cold+0x36e5/0x4794 [<ffffffffb0f3dbe1>] jffs2_do_mount_fs.cold+0xa7/0x2267 [<ffffffffaf40acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffaf40c00a>] jffs2_fill_super+0x2ea/0x4c0 [<ffffffffb0315d64>] mtd_get_sb+0x254/0x400 [<ffffffffb0315f5f>] mtd_get_sb_by_nr+0x4f/0xd0 [<ffffffffb0316478>] get_tree_mtd+0x498/0x840 [<ffffffffaf40bd15>] jffs2_get_tree+0x25/0x30 [<ffffffffae9f358d>] vfs_get_tree+0x8d/0x2e0 [<ffffffffaea7a98f>] path_mount+0x50f/0x1e50 [<ffffffffaea7c3d7>] do_mount+0x107/0x130 [<ffffffffaea7c5c5>] __se_sys_mount+0x1c5/0x2f0 [<ffffffffaea7c917>] __x64_sys_mount+0xc7/0x160 [<ffffffffb10142f5>] do_syscall_64+0x45/0x70 unreferenced object 0xffff888114b54840 (size 32): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): c0 75 b5 14 81 88 ff ff 02 e0 02 00 00 00 02 00 .u.............. 00 00 84 00 00 00 44 00 00 00 6b 6b 6b 6b 6b a5 ......D...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423b04>] jffs2_sum_add_inode_mem+0x54/0x90 [<ffffffffb0f3bd44>] jffs2_scan_medium.cold+0x4481/0x4794 [...] unreferenced object 0xffff888114b57280 (size 32): comm "mount", pid 692, jiffies 4294838393 (age 34.357s) hex dump (first 32 bytes): 10 d5 6c 11 81 88 ff ff 08 e0 05 00 00 00 01 00 ..l............. 00 00 38 02 00 00 28 00 00 00 6b 6b 6b 6b 6b a5 ..8...(...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423c34>] jffs2_sum_add_xattr_mem+0x54/0x90 [<ffffffffb0f3a24f>] jffs2_scan_medium.cold+0x298c/0x4794 [...] unreferenced object 0xffff8881116cd510 (size 16): comm "mount", pid 692, jiffies 4294838395 (age 34.355s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 09 e0 60 02 00 00 6b a5 ..........`...k. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423cc4>] jffs2_sum_add_xref_mem+0x54/0x90 [<ffffffffb0f3b2e3>] jffs2_scan_medium.cold+0x3a20/0x4794 [...] -------------------------------------------- Therefore, we should call jffs2_sum_reset_collected(s) on exit to release the memory added in s. In addition, a new tag "out_buf" is added to prevent the NULL pointer reference caused by s being NULL. (thanks to Zhang Yi for this analysis)

In the Linux kernel, the following vulnerability has been resolved: nfs4: Fix kmemleak when allocate slot failed If one of the slot allocate failed, should cleanup all the other allocated slots, otherwise, the allocated slots will leak: unreferenced object 0xffff8881115aa100 (size 64): comm ""mount.nfs"", pid 679, jiffies 4294744957 (age 115.037s) hex dump (first 32 bytes): 00 cc 19 73 81 88 ff ff 00 a0 5a 11 81 88 ff ff ...s......Z..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000007a4c434a>] nfs4_find_or_create_slot+0x8e/0x130 [<000000005472a39c>] nfs4_realloc_slot_table+0x23f/0x270 [<00000000cd8ca0eb>] nfs40_init_client+0x4a/0x90 [<00000000128486db>] nfs4_init_client+0xce/0x270 [<000000008d2cacad>] nfs4_set_client+0x1a2/0x2b0 [<000000000e593b52>] nfs4_create_server+0x300/0x5f0 [<00000000e4425dd2>] nfs4_try_get_tree+0x65/0x110 [<00000000d3a6176f>] vfs_get_tree+0x41/0xf0 [<0000000016b5ad4c>] path_mount+0x9b3/0xdd0 [<00000000494cae71>] __x64_sys_mount+0x190/0x1d0 [<000000005d56bdec>] do_syscall_64+0x35/0x80 [<00000000687c9ae4>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: Fix xarray node memory leak If xas_split_alloc() fails to allocate the necessary nodes to complete the xarray entry split, it sets the xa_state to -ENOMEM, which xas_nomem() then interprets as "Please allocate more memory", not as "Please free any unnecessary memory" (which was the intended outcome). It's confusing to use xas_nomem() to free memory in this context, so call xas_destroy() instead.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init If the function sdma_load_context() fails, the sdma_desc will be freed, but the allocated desc->bd is forgot to be freed. We already met the sdma_load_context() failure case and the log as below: [ 450.699064] imx-sdma 30bd0000.dma-controller: Timeout waiting for CH0 ready ... In this case, the desc->bd will not be freed without this change.

In the Linux kernel, the following vulnerability has been resolved: i2c: piix4: Fix a memory leak in the EFCH MMIO support The recently added support for EFCH MMIO regions introduced a memory leak in that code path. The leak is caused by the fact that release_resource() merely removes the resource from the tree but does not free its memory. We need to call release_mem_region() instead, which does free the memory. As a nice side effect, this brings back some symmetry between the legacy and MMIO paths.

In the Linux kernel, the following vulnerability has been resolved: nfc: nfcmrvl: Fix potential memory leak in nfcmrvl_i2c_nci_send() nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send() will only free skb when i2c_master_send() return >=0, which means skb will memleak when i2c_master_send() failed. Free skb no matter whether i2c_master_send() succeeds.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix inode list leak during backref walking at resolve_indirect_refs() During backref walking, at resolve_indirect_refs(), if we get an error we jump to the 'out' label and call ulist_free() on the 'parents' ulist, which frees all the elements in the ulist - however that does not free any inode lists that may be attached to elements, through the 'aux' field of a ulist node, so we end up leaking lists if we have any attached to the unodes. Fix this by calling free_leaf_list() instead of ulist_free() when we exit from resolve_indirect_refs(). The static function free_leaf_list() is moved up for this to be possible and it's slightly simplified by removing unnecessary code.

In the Linux kernel, the following vulnerability has been resolved: kernel/resource: fix kfree() of bootmem memory again Since commit ebff7d8f270d ("mem hotunplug: fix kfree() of bootmem memory"), we could get a resource allocated during boot via alloc_resource(). And it's required to release the resource using free_resource(). Howerver, many people use kfree directly which will result in kernel BUG. In order to fix this without fixing every call site, just leak a couple of bytes in such corner case.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/uncore: Fix memory leak for events array When a CPU comes online, the per-CPU NB and LLC uncore contexts are freed but not the events array within the context structure. This causes a memory leak as identified by the kmemleak detector. [...] unreferenced object 0xffff8c5944b8e320 (size 32): comm "swapper/0", pid 1, jiffies 4294670387 (age 151.072s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000000759fb79>] amd_uncore_cpu_up_prepare+0xaf/0x230 [<00000000ddc9e126>] cpuhp_invoke_callback+0x2cf/0x470 [<0000000093e727d4>] cpuhp_issue_call+0x14d/0x170 [<0000000045464d54>] __cpuhp_setup_state_cpuslocked+0x11e/0x330 [<0000000069f67cbd>] __cpuhp_setup_state+0x6b/0x110 [<0000000015365e0f>] amd_uncore_init+0x260/0x321 [<00000000089152d2>] do_one_initcall+0x3f/0x1f0 [<000000002d0bd18d>] kernel_init_freeable+0x1ca/0x212 [<0000000030be8dde>] kernel_init+0x11/0x120 [<0000000059709e59>] ret_from_fork+0x22/0x30 unreferenced object 0xffff8c5944b8dd40 (size 64): comm "swapper/0", pid 1, jiffies 4294670387 (age 151.072s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000306efe8b>] amd_uncore_cpu_up_prepare+0x183/0x230 [<00000000ddc9e126>] cpuhp_invoke_callback+0x2cf/0x470 [<0000000093e727d4>] cpuhp_issue_call+0x14d/0x170 [<0000000045464d54>] __cpuhp_setup_state_cpuslocked+0x11e/0x330 [<0000000069f67cbd>] __cpuhp_setup_state+0x6b/0x110 [<0000000015365e0f>] amd_uncore_init+0x260/0x321 [<00000000089152d2>] do_one_initcall+0x3f/0x1f0 [<000000002d0bd18d>] kernel_init_freeable+0x1ca/0x212 [<0000000030be8dde>] kernel_init+0x11/0x120 [<0000000059709e59>] ret_from_fork+0x22/0x30 [...] Fix the problem by freeing the events array before freeing the uncore context.

In the Linux kernel, the following vulnerability has been resolved: nfc: fdp: Fix potential memory leak in fdp_nci_send() fdp_nci_send() will call fdp_nci_i2c_write that will not free skb in the function. As a result, when fdp_nci_i2c_write() finished, the skb will memleak. fdp_nci_send() should free skb after fdp_nci_i2c_write() finished.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix anon_dev leak in create_subvol() When btrfs_qgroup_inherit(), btrfs_alloc_tree_block, or btrfs_insert_root() fail in create_subvol(), we return without freeing anon_dev. Reorganize the error handling in create_subvol() to fix this.

In the Linux kernel, the following vulnerability has been resolved: firmware: sysfb: fix platform-device leak in error path Make sure to free the platform device also in the unlikely event that registration fails.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: fix memory leak in query_regdb_file() In the function query_regdb_file() the alpha2 parameter is duplicated using kmemdup() and subsequently freed in regdb_fw_cb(). However, request_firmware_nowait() can fail without calling regdb_fw_cb() and thus leak memory.

In the Linux kernel, the following vulnerability has been resolved: Input: i8042 - fix leaking of platform device on module removal Avoid resetting the module-wide i8042_platform_device pointer in i8042_probe() or i8042_remove(), so that the device can be properly destroyed by i8042_exit() on module unload.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: fix memory leak in ipc_wwan_dellink IOSM driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice().

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-glue: fix memory leak when register device fail If device_register() fails, it should call put_device() to give up reference, the name allocated in dev_set_name() can be freed in callback function kobject_cleanup().

In the Linux kernel, the following vulnerability has been resolved: rtw88: fix memory overrun and memory leak during hw_scan Previously we allocated less memory than actual required, overwrite to the buffer causes the mm module to complaint and raise access violation faults. Along with potential memory leaks when returned early. Fix these by passing the correct size and proper deinit flow.

In the Linux kernel, the following vulnerability has been resolved: media: rga: fix possible memory leak in rga_probe rga->m2m_dev needs to be freed when rga_probe fails.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix memory leak in tracing_read_pipe() kmemleak reports this issue: unreferenced object 0xffff888105a18900 (size 128): comm "test_progs", pid 18933, jiffies 4336275356 (age 22801.766s) hex dump (first 32 bytes): 25 73 00 90 81 88 ff ff 26 05 00 00 42 01 58 04 %s......&...B.X. 03 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000560143a1>] __kmalloc_node_track_caller+0x4a/0x140 [<000000006af00822>] krealloc+0x8d/0xf0 [<00000000c309be6a>] trace_iter_expand_format+0x99/0x150 [<000000005a53bdb6>] trace_check_vprintf+0x1e0/0x11d0 [<0000000065629d9d>] trace_event_printf+0xb6/0xf0 [<000000009a690dc7>] trace_raw_output_bpf_trace_printk+0x89/0xc0 [<00000000d22db172>] print_trace_line+0x73c/0x1480 [<00000000cdba76ba>] tracing_read_pipe+0x45c/0x9f0 [<0000000015b58459>] vfs_read+0x17b/0x7c0 [<000000004aeee8ed>] ksys_read+0xed/0x1c0 [<0000000063d3d898>] do_syscall_64+0x3b/0x90 [<00000000a06dda7f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd iter->fmt alloced in tracing_read_pipe() -> .. ->trace_iter_expand_format(), but not freed, to fix, add free in tracing_release_pipe()

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: fix memory leak during D3hot to D0 transition If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does not have No_Soft_Reset bit set in its PMCSR config register), then the current PCI state will be saved locally in 'vfio_pci_core_device::pm_save' during D0->D3hot transition and same will be restored back during D3hot->D0 transition. For saving the PCI state locally, pci_store_saved_state() is being used and the pci_load_and_free_saved_state() will free the allocated memory. But for reset related IOCTLs, vfio driver calls PCI reset-related API's which will internally change the PCI power state back to D0. So, when the guest resumes, then it will get the current state as D0 and it will skip the call to vfio_pci_set_power_state() for changing the power state to D0 explicitly. In this case, the memory pointed by 'pm_save' will never be freed. In a malicious sequence, the state changing to D3hot followed by VFIO_DEVICE_RESET/VFIO_DEVICE_PCI_HOT_RESET can be run in a loop and it can cause an OOM situation. This patch frees the earlier allocated memory first before overwriting 'pm_save' to prevent the mentioned memory leak.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix request_sock leak in sk lookup helpers A customer reported a request_socket leak in a Calico cloud environment. We found that a BPF program was doing a socket lookup with takes a refcnt on the socket and that it was finding the request_socket but returning the parent LISTEN socket via sk_to_full_sk() without decrementing the child request socket 1st, resulting in request_sock slab object leak. This patch retains the existing behaviour of returning full socks to the caller but it also decrements the child request_socket if one is present before doing so to prevent the leak. Thanks to Curtis Taylor for all the help in diagnosing and testing this. And thanks to Antoine Tenart for the reproducer and patch input. v2 of this patch contains, refactor as per Daniel Borkmann's suggestions to validate RCU flags on the listen socket so that it balances with bpf_sk_release() and update comments as per Martin KaFai Lau's suggestion. One small change to Daniels suggestion, put "sk = sk2" under "if (sk2 != sk)" to avoid an extra instruction.

In the Linux kernel, the following vulnerability has been resolved: raid10: cleanup memleak at raid10_make_request If raid10_read_request or raid10_write_request registers a new request and the REQ_NOWAIT flag is set, the code does not free the malloc from the mempool. unreferenced object 0xffff8884802c3200 (size 192): comm "fio", pid 9197, jiffies 4298078271 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 88 41 02 00 00 00 00 00 .........A...... 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc c1a049a2): __kmalloc+0x2bb/0x450 mempool_alloc+0x11b/0x320 raid10_make_request+0x19e/0x650 [raid10] md_handle_request+0x3b3/0x9e0 __submit_bio+0x394/0x560 __submit_bio_noacct+0x145/0x530 submit_bio_noacct_nocheck+0x682/0x830 __blkdev_direct_IO_async+0x4dc/0x6b0 blkdev_read_iter+0x1e5/0x3b0 __io_read+0x230/0x1110 io_read+0x13/0x30 io_issue_sqe+0x134/0x1180 io_submit_sqes+0x48c/0xe90 __do_sys_io_uring_enter+0x574/0x8b0 do_syscall_64+0x5c/0xe0 entry_SYSCALL_64_after_hwframe+0x76/0x7e V4: changing backing tree to see if CKI tests will pass. The patch code has not changed between any versions.

In the Linux kernel, the following vulnerability has been resolved: net: lantiq_xrx200: restore buffer if memory allocation failed In a situation where memory allocation fails, an invalid buffer address is stored. When this descriptor is used again, the system panics in the build_skb() function when accessing memory.

In the Linux kernel, the following vulnerability has been resolved: octeon_ep: fix potential memory leak in octep_device_setup() When occur unsupported_dev and mbox init errors, it did not free oct->conf and iounmap() oct->mmio[i].hw_addr. That would trigger memory leak problem. Add kfree() for oct->conf and iounmap() for oct->mmio[i].hw_addr under unsupported_dev and mbox init errors to fix the problem.

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Free rwi on reset success Free the rwi structure in the event that the last rwi in the list processed successfully. The logic in commit 4f408e1fa6e1 ("ibmvnic: retry reset if there are no other resets") introduces an issue that results in a 32 byte memory leak whenever the last rwi in the list gets processed.

In the Linux kernel, the following vulnerability has been resolved: cifs: fix small mempool leak in SMB2_negotiate() In some cases of failure (dialect mismatches) in SMB2_negotiate(), after the request is sent, the checks would return -EIO when they should be rather setting rc = -EIO and jumping to neg_exit to free the response buffer from mempool.

In the Linux kernel, the following vulnerability has been resolved: iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init() dev_set_name() allocates memory for name, it need be freed when device_add() fails, call put_device() to give up the reference that hold in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hit to 0. Fault injection test can trigger this: unreferenced object 0xffff8e8340a7b4c0 (size 32): comm "modprobe", pid 243, jiffies 4294678145 (age 48.845s) hex dump (first 32 bytes): 69 69 6f 5f 73 79 73 66 73 5f 74 72 69 67 67 65 iio_sysfs_trigge 72 00 a7 40 83 8e ff ff 00 86 13 c4 f6 ee ff ff r..@............ backtrace: [<0000000074999de8>] __kmem_cache_alloc_node+0x1e9/0x360 [<00000000497fd30b>] __kmalloc_node_track_caller+0x44/0x1a0 [<000000003636c520>] kstrdup+0x2d/0x60 [<0000000032f84da2>] kobject_set_name_vargs+0x1e/0x90 [<0000000092efe493>] dev_set_name+0x4e/0x70

In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling Error paths do not free previously allocated memory. Add devm_kfree() to those failure paths.

In the Linux kernel, the following vulnerability has been resolved: amt: fix possible memory leak in amt_rcv() If an amt receives packets and it finds socket. If it can't find a socket, it should free a received skb. But it doesn't. So, a memory leak would possibly occur.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921s: fix a possible memory leak in mt7921_load_patch Always release fw data at the end of mt7921_load_patch routine.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix memory leak in error flow for subscribe event routine In case the second xa_insert() fails, the obj_event is not released. Fix the error unwind flow to free that memory to avoid a memory leak.

In the Linux kernel, the following vulnerability has been resolved: net: macvlan: fix memory leaks of macvlan_common_newlink kmemleak reports memory leaks in macvlan_common_newlink, as follows: ip link add link eth0 name .. type macvlan mode source macaddr add <MAC-ADDR> kmemleak reports: unreferenced object 0xffff8880109bb140 (size 64): comm "ip", pid 284, jiffies 4294986150 (age 430.108s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff ..........Z..... 80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b ..............kk backtrace: [<ffffffff813e06a7>] kmem_cache_alloc_trace+0x1c7/0x300 [<ffffffff81b66025>] macvlan_hash_add_source+0x45/0xc0 [<ffffffff81b66a67>] macvlan_changelink_sources+0xd7/0x170 [<ffffffff81b6775c>] macvlan_common_newlink+0x38c/0x5a0 [<ffffffff81b6797e>] macvlan_newlink+0xe/0x20 [<ffffffff81d97f8f>] __rtnl_newlink+0x7af/0xa50 [<ffffffff81d98278>] rtnl_newlink+0x48/0x70 ... In the scenario where the macvlan mode is configured as 'source', macvlan_changelink_sources() will be execured to reconfigure list of remote source mac addresses, at the same time, if register_netdevice() return an error, the resource generated by macvlan_changelink_sources() is not cleaned up. Using this patch, in the case of an error, it will execute macvlan_flush_sources() to ensure that the resource is cleaned up.