In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: avoid off-by-one read from userspace We try to access count + 1 byte from userspace with memdup_user(buffer, count + 1). However, the userspace only provides buffer of count bytes and only these count bytes are verified to be okay to access. To ensure the copied buffer is NUL terminated, we use memdup_user_nul instead.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix off by one in qla_edif_app_getstats() The app_reply->elem[] array is allocated earlier in this function and it has app_req.num_ports elements. Thus this > comparison needs to be >= to prevent memory corruption.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Off by one in dm_dmub_outbox1_low_irq() The > ARRAY_SIZE() should be >= ARRAY_SIZE() to prevent an out of bounds access.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix off-by-one errors in fast-commit block filling Due to several different off-by-one errors, or perhaps due to a late change in design that wasn't fully reflected in the code that was actually merged, there are several very strange constraints on how fast-commit blocks are filled with tlv entries: - tlvs must start at least 10 bytes before the end of the block, even though the minimum tlv length is 8. Otherwise, the replay code will ignore them. (BUG: ext4_fc_reserve_space() could violate this requirement if called with a len of blocksize - 9 or blocksize - 8. Fortunately, this doesn't seem to happen currently.) - tlvs must end at least 1 byte before the end of the block. Otherwise the replay code will consider them to be invalid. This quirk contributed to a bug (fixed by an earlier commit) where uninitialized memory was being leaked to disk in the last byte of blocks. Also, strangely these constraints don't apply to the replay code in e2fsprogs, which will accept any tlvs in the blocks (with no bounds checks at all, but that is a separate issue...). Given that this all seems to be a bug, let's fix it by just filling blocks with tlv entries in the natural way. Note that old kernels will be unable to replay fast-commit journals created by kernels that have this commit.

In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix sdma.h tx->num_descs off-by-one error Unfortunately the commit `fd8958efe877` introduced another error causing the `descs` array to overflow. This reults in further crashes easily reproducible by `sendmsg` system call. [ 1080.836473] general protection fault, probably for non-canonical address 0x400300015528b00a: 0000 [#1] PREEMPT SMP PTI [ 1080.869326] RIP: 0010:hfi1_ipoib_build_ib_tx_headers.constprop.0+0xe1/0x2b0 [hfi1] -- [ 1080.974535] Call Trace: [ 1080.976990] <TASK> [ 1081.021929] hfi1_ipoib_send_dma_common+0x7a/0x2e0 [hfi1] [ 1081.027364] hfi1_ipoib_send_dma_list+0x62/0x270 [hfi1] [ 1081.032633] hfi1_ipoib_send+0x112/0x300 [hfi1] [ 1081.042001] ipoib_start_xmit+0x2a9/0x2d0 [ib_ipoib] [ 1081.046978] dev_hard_start_xmit+0xc4/0x210 -- [ 1081.148347] __sys_sendmsg+0x59/0xa0 crash> ipoib_txreq 0xffff9cfeba229f00 struct ipoib_txreq { txreq = { list = { next = 0xffff9cfeba229f00, prev = 0xffff9cfeba229f00 }, descp = 0xffff9cfeba229f40, coalesce_buf = 0x0, wait = 0xffff9cfea4e69a48, complete = 0xffffffffc0fe0760 <hfi1_ipoib_sdma_complete>, packet_len = 0x46d, tlen = 0x0, num_desc = 0x0, desc_limit = 0x6, next_descq_idx = 0x45c, coalesce_idx = 0x0, flags = 0x0, descs = {{ qw = {0x8024000120dffb00, 0x4} # SDMA_DESC0_FIRST_DESC_FLAG (bit 63) }, { qw = { 0x3800014231b108, 0x4} }, { qw = { 0x310000e4ee0fcf0, 0x8} }, { qw = { 0x3000012e9f8000, 0x8} }, { qw = { 0x59000dfb9d0000, 0x8} }, { qw = { 0x78000e02e40000, 0x8} }} }, sdma_hdr = 0x400300015528b000, <<< invalid pointer in the tx request structure sdma_status = 0x0, SDMA_DESC0_LAST_DESC_FLAG (bit 62) complete = 0x0, priv = 0x0, txq = 0xffff9cfea4e69880, skb = 0xffff9d099809f400 } If an SDMA send consists of exactly 6 descriptors and requires dword padding (in the 7th descriptor), the sdma_txreq descriptor array is not properly expanded and the packet will overflow into the container structure. This results in a panic when the send completion runs. The exact panic varies depending on what elements of the container structure get corrupted. The fix is to use the correct expression in _pad_sdma_tx_descs() to test the need to expand the descriptor array. With this patch the crashes are no longer reproducible and the machine is stable.

In rds_recv_track_latency in net/rds/af_rds.c in the Linux kernel through 6.7.1, there is an off-by-one error for an RDS_MSG_RX_DGRAM_TRACE_MAX comparison, resulting in out-of-bounds access.

In the Linux kernel, the following vulnerability has been resolved: modpost: fix off by one in is_executable_section() The > comparison should be >= to prevent an out of bounds array access.

In the Linux kernel, the following vulnerability has been resolved: timers/migration: Fix off-by-one root mis-connection Before attaching a new root to the old root, the children counter of the new root is checked to verify that only the upcoming CPU's top group have been connected to it. However since the recently added commit b729cc1ec21a ("timers/migration: Fix another race between hotplug and idle entry/exit") this check is not valid anymore because the old root is pre-accounted as a child to the new root. Therefore after connecting the upcoming CPU's top group to the new root, the children count to be expected must be 2 and not 1 anymore. This omission results in the old root to not be connected to the new root. Then eventually the system may run with more than one top level, which defeats the purpose of a single idle migrator. Also the old root is pre-accounted but not connected upon the new root creation. But it can be connected to the new root later on. Therefore the old root may be accounted twice to the new root. The propagation of such overcommit can end up creating a double final top-level root with a groupmask incorrectly initialized. Although harmless given that the final top level roots will never have a parent to walk up to, this oddity opportunistically reported the core issue: WARNING: CPU: 8 PID: 0 at kernel/time/timer_migration.c:543 tmigr_requires_handle_remote CPU: 8 UID: 0 PID: 0 Comm: swapper/8 RIP: 0010:tmigr_requires_handle_remote Call Trace: <IRQ> ? tmigr_requires_handle_remote ? hrtimer_run_queues update_process_times tick_periodic tick_handle_periodic __sysvec_apic_timer_interrupt sysvec_apic_timer_interrupt </IRQ> Fix the problem by taking the old root into account in the children count of the new root so the connection is not omitted. Also warn when more than one top level group exists to better detect similar issues in the future.

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Fix potential VPE leak on error In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error, there is an off-by-one in the number of VPEs to be freed. Fix it by simply passing the number of VPEs allocated, which is the index of the loop iterating over the VPEs. [maz: fixed commit message]

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan() The ssid->ssids[] and sreq->ssids[] arrays have MT7925_RNR_SCAN_MAX_BSSIDS elements so this >= needs to be > to prevent an out of bounds access.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Fix off-by-one error in build_prologue() Vincent reported that running BPF progs with tailcalls on LoongArch causes kernel hard lockup. Debugging the issues shows that the JITed image missing a jirl instruction at the end of the epilogue. There are two passes in JIT compiling, the first pass set the flags and the second pass generates JIT code based on those flags. With BPF progs mixing bpf2bpf and tailcalls, build_prologue() generates N insns in the first pass and then generates N+1 insns in the second pass. This makes epilogue_offset off by one and we will jump to some unexpected insn and cause lockup. Fix this by inserting a nop insn.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix another off-by-one fsmap error on 1k block filesystems Apparently syzbot figured out that issuing this FSMAP call: struct fsmap_head cmd = { .fmh_count = ...; .fmh_keys = { { .fmr_device = /* ext4 dev */, .fmr_physical = 0, }, { .fmr_device = /* ext4 dev */, .fmr_physical = 0, }, }, ... }; ret = ioctl(fd, FS_IOC_GETFSMAP, &cmd); Produces this crash if the underlying filesystem is a 1k-block ext4 filesystem: kernel BUG at fs/ext4/ext4.h:3331! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 3 PID: 3227965 Comm: xfs_io Tainted: G W O 6.2.0-rc8-achx Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:ext4_mb_load_buddy_gfp+0x47c/0x570 [ext4] RSP: 0018:ffffc90007c03998 EFLAGS: 00010246 RAX: ffff888004978000 RBX: ffffc90007c03a20 RCX: ffff888041618000 RDX: 0000000000000000 RSI: 00000000000005a4 RDI: ffffffffa0c99b11 RBP: ffff888012330000 R08: ffffffffa0c2b7d0 R09: 0000000000000400 R10: ffffc90007c03950 R11: 0000000000000000 R12: 0000000000000001 R13: 00000000ffffffff R14: 0000000000000c40 R15: ffff88802678c398 FS: 00007fdf2020c880(0000) GS:ffff88807e100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd318a5fe8 CR3: 000000007f80f001 CR4: 00000000001706e0 Call Trace: <TASK> ext4_mballoc_query_range+0x4b/0x210 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] ext4_getfsmap_datadev+0x713/0x890 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] ext4_getfsmap+0x2b7/0x330 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] ext4_ioc_getfsmap+0x153/0x2b0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] __ext4_ioctl+0x2a7/0x17e0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] __x64_sys_ioctl+0x82/0xa0 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fdf20558aff RSP: 002b:00007ffd318a9e30 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000000200c0 RCX: 00007fdf20558aff RDX: 00007fdf1feb2010 RSI: 00000000c0c0583b RDI: 0000000000000003 RBP: 00005625c0634be0 R08: 00005625c0634c40 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fdf1feb2010 R13: 00005625be70d994 R14: 0000000000000800 R15: 0000000000000000 For GETFSMAP calls, the caller selects a physical block device by writing its block number into fsmap_head.fmh_keys[01].fmr_device. To query mappings for a subrange of the device, the starting byte of the range is written to fsmap_head.fmh_keys[0].fmr_physical and the last byte of the range goes in fsmap_head.fmh_keys[1].fmr_physical. IOWs, to query what mappings overlap with bytes 3-14 of /dev/sda, you'd set the inputs as follows: fmh_keys[0] = { .fmr_device = major(8, 0), .fmr_physical = 3}, fmh_keys[1] = { .fmr_device = major(8, 0), .fmr_physical = 14}, Which would return you whatever is mapped in the 12 bytes starting at physical offset 3. The crash is due to insufficient range validation of keys[1] in ext4_getfsmap_datadev. On 1k-block filesystems, block 0 is not part of the filesystem, which means that s_first_data_block is nonzero. ext4_get_group_no_and_offset subtracts this quantity from the blocknr argument before cracking it into a group number and a block number within a group. IOWs, block group 0 spans blocks 1-8192 (1-based) instead of 0-8191 (0-based) like what happens with larger blocksizes. The net result of this encoding is that blocknr < s_first_data_block is not a valid input to this function. The end_fsb variable is set from the keys that are copied from userspace, which means that in the above example, its value is zero. That leads to an underflow here: blocknr = blocknr - le32_to_cpu(es->s_first_data_block); The division then operates on -1: offset = do_div(blocknr, EXT4_BLOCKS_PER_GROUP(sb)) >> EXT4_SB(sb)->s_cluster_bits; Leaving an impossibly large group number (2^32-1) in blocknr. ext4_getfsmap_check_keys checked that keys[0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Several fixes to bpf_msg_pop_data Several fixes to bpf_msg_pop_data, 1. In sk_msg_shift_left, we should put_page 2. if (len == 0), return early is better 3. pop the entire sk_msg (last == msg->sg.size) should be supported 4. Fix for the value of variable "a" 5. In sk_msg_shift_left, after shifting, i has already pointed to the next element. Addtional sk_msg_iter_var_next may result in BUG.

In the Linux kernel, the following vulnerability has been resolved: crypto: qat/qat_420xx - fix off by one in uof_get_name() This is called from uof_get_name_420xx() where "num_objs" is the ARRAY_SIZE() of fw_objs[]. The > needs to be >= to prevent an out of bounds access.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix off-by-one error in do_split Syzkaller detected a use-after-free issue in ext4_insert_dentry that was caused by out-of-bounds access due to incorrect splitting in do_split. BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109 Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847 CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106 ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109 add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154 make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351 ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455 ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796 ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431 vfs_symlink+0x137/0x2e0 fs/namei.c:4615 do_symlinkat+0x222/0x3a0 fs/namei.c:4641 __do_sys_symlink fs/namei.c:4662 [inline] __se_sys_symlink fs/namei.c:4660 [inline] __x64_sys_symlink+0x7a/0x90 fs/namei.c:4660 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> The following loop is located right above 'if' statement. for (i = count-1; i >= 0; i--) { /* is more than half of this entry in 2nd half of the block? */ if (size + map[i].size/2 > blocksize/2) break; size += map[i].size; move++; } 'i' in this case could go down to -1, in which case sum of active entries wouldn't exceed half the block size, but previous behaviour would also do split in half if sum would exceed at the very last block, which in case of having too many long name files in a single block could lead to out-of-bounds access and following use-after-free. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Avoid undefined behavior: applying zero offset to null pointer ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master.

In the Linux kernel, the following vulnerability has been resolved: net: hso: fix NULL-deref on disconnect regression Commit 8a12f8836145 ("net: hso: fix null-ptr-deref during tty device unregistration") fixed the racy minor allocation reported by syzbot, but introduced an unconditional NULL-pointer dereference on every disconnect instead. Specifically, the serial device table must no longer be accessed after the minor has been released by hso_serial_tty_unregister().

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: intel-sdw-acpi: harden detection of controller The existing code currently sets a pointer to an ACPI handle before checking that it's actually a SoundWire controller. This can lead to issues where the graph walk continues and eventually fails, but the pointer was set already. This patch changes the logic so that the information provided to the caller is set when a controller is found.

In the Linux kernel, the following vulnerability has been resolved: mm: prevent derefencing NULL ptr in pfn_section_valid() Commit 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing memory_section->usage") changed pfn_section_valid() to add a READ_ONCE() call around "ms->usage" to fix a race with section_deactivate() where ms->usage can be cleared. The READ_ONCE() call, by itself, is not enough to prevent NULL pointer dereference. We need to check its value before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Fix bug with call depth tracking The call to cc_platform_has() triggers a fault and system crash if call depth tracking is active because the GS segment has been reset by load_segments() and GS_BASE is now 0 but call depth tracking uses per-CPU variables to operate. Call cc_platform_has() earlier in the function when GS is still valid. [ bp: Massage. ]

In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Fix deadlock with the SPI chip variant When SMP is enabled and spinlocks are actually functional then there is a deadlock with the 'statelock' spinlock between ks8851_start_xmit_spi and ks8851_irq: watchdog: BUG: soft lockup - CPU#0 stuck for 27s! call trace: queued_spin_lock_slowpath+0x100/0x284 do_raw_spin_lock+0x34/0x44 ks8851_start_xmit_spi+0x30/0xb8 ks8851_start_xmit+0x14/0x20 netdev_start_xmit+0x40/0x6c dev_hard_start_xmit+0x6c/0xbc sch_direct_xmit+0xa4/0x22c __qdisc_run+0x138/0x3fc qdisc_run+0x24/0x3c net_tx_action+0xf8/0x130 handle_softirqs+0x1ac/0x1f0 __do_softirq+0x14/0x20 ____do_softirq+0x10/0x1c call_on_irq_stack+0x3c/0x58 do_softirq_own_stack+0x1c/0x28 __irq_exit_rcu+0x54/0x9c irq_exit_rcu+0x10/0x1c el1_interrupt+0x38/0x50 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x64/0x68 __netif_schedule+0x6c/0x80 netif_tx_wake_queue+0x38/0x48 ks8851_irq+0xb8/0x2c8 irq_thread_fn+0x2c/0x74 irq_thread+0x10c/0x1b0 kthread+0xc8/0xd8 ret_from_fork+0x10/0x20 This issue has not been identified earlier because tests were done on a device with SMP disabled and so spinlocks were actually NOPs. Now use spin_(un)lock_bh for TX queue related locking to avoid execution of softirq work synchronously that would lead to a deadlock.

In the Linux kernel, the following vulnerability has been resolved: ixgbe: fix unbalanced device enable/disable in suspend/resume pci_disable_device() called in __ixgbe_shutdown() decreases dev->enable_cnt by 1. pci_enable_device_mem() which increases dev->enable_cnt by 1, was removed from ixgbe_resume() in commit 6f82b2558735 ("ixgbe: use generic power management"). This caused unbalanced increase/decrease. So add pci_enable_device_mem() back. Fix the following call trace. ixgbe 0000:17:00.1: disabling already-disabled device Call Trace: __ixgbe_shutdown+0x10a/0x1e0 [ixgbe] ixgbe_suspend+0x32/0x70 [ixgbe] pci_pm_suspend+0x87/0x160 ? pci_pm_freeze+0xd0/0xd0 dpm_run_callback+0x42/0x170 __device_suspend+0x114/0x460 async_suspend+0x1f/0xa0 async_run_entry_fn+0x3c/0xf0 process_one_work+0x1dd/0x410 worker_thread+0x34/0x3f0 ? cancel_delayed_work+0x90/0x90 kthread+0x14c/0x170 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30

In the Linux kernel, the following vulnerability has been resolved: bpf: Use correct permission flag for mixed signed bounds arithmetic We forbid adding unknown scalars with mixed signed bounds due to the spectre v1 masking mitigation. Hence this also needs bypass_spec_v1 flag instead of allow_ptr_leaks.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix wq size store permission state WQ size can only be changed when the device is disabled. Current code allows change when device is enabled but wq is disabled. Change the check to detect device state.

In the Linux kernel, the following vulnerability has been resolved: net: hso: fix null-ptr-deref during tty device unregistration Multiple ttys try to claim the same the minor number causing a double unregistration of the same device. The first unregistration succeeds but the next one results in a null-ptr-deref. The get_free_serial_index() function returns an available minor number but doesn't assign it immediately. The assignment is done by the caller later. But before this assignment, calls to get_free_serial_index() would return the same minor number. Fix this by modifying get_free_serial_index to assign the minor number immediately after one is found to be and rename it to obtain_minor() to better reflect what it does. Similary, rename set_serial_by_index() to release_minor() and modify it to free up the minor number of the given hso_serial. Every obtain_minor() should have corresponding release_minor() call.

In the Linux kernel, the following vulnerability has been resolved: ARM: 9063/1: mm: reduce maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled The debugging code for kmap_local() doubles the number of per-CPU fixmap slots allocated for kmap_local(), in order to use half of them as guard regions. This causes the fixmap region to grow downwards beyond the start of its reserved window if the supported number of CPUs is large, and collide with the newly added virtual DT mapping right below it, which is obviously not good. One manifestation of this is EFI boot on a kernel built with NR_CPUS=32 and CONFIG_DEBUG_KMAP_LOCAL=y, which may pass the FDT in highmem, resulting in block entries below the fixmap region that the fixmap code misidentifies as fixmap table entries, and subsequently tries to dereference using a phys-to-virt translation that is only valid for lowmem. This results in a cryptic splat such as the one below. ftrace: allocating 45548 entries in 89 pages 8<--- cut here --- Unable to handle kernel paging request at virtual address fc6006f0 pgd = (ptrval) [fc6006f0] *pgd=80000040207003, *pmd=00000000 Internal error: Oops: a06 [#1] SMP ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.11.0+ #382 Hardware name: Generic DT based system PC is at cpu_ca15_set_pte_ext+0x24/0x30 LR is at __set_fixmap+0xe4/0x118 pc : [<c041ac9c>] lr : [<c04189d8>] psr: 400000d3 sp : c1601ed8 ip : 00400000 fp : 00800000 r10: 0000071f r9 : 00421000 r8 : 00c00000 r7 : 00c00000 r6 : 0000071f r5 : ffade000 r4 : 4040171f r3 : 00c00000 r2 : 4040171f r1 : c041ac78 r0 : fc6006f0 Flags: nZcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 30c5387d Table: 40203000 DAC: 00000001 Process swapper (pid: 0, stack limit = 0x(ptrval)) So let's limit CONFIG_NR_CPUS to 16 when CONFIG_DEBUG_KMAP_LOCAL=y. Also, fix the BUILD_BUG_ON() check that was supposed to catch this, by checking whether the region grows below the start address rather than above the end address.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: clear MSIX permission entry on shutdown Add disabling/clearing of MSIX permission entries on device shutdown to mirror the enabling of the MSIX entries on probe. Current code left the MSIX enabled and the pasid entries still programmed at device shutdown.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: Do core softreset when switch mode According to the programming guide, to switch mode for DRD controller, the driver needs to do the following. To switch from device to host: 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(host mode) 3. Reset the host with USBCMD.HCRESET 4. Then follow up with the initializing host registers sequence To switch from host to device: 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(device mode) 3. Reset the device with DCTL.CSftRst 4. Then follow up with the initializing registers sequence Currently we're missing step 1) to do GCTL.CoreSoftReset and step 3) of switching from host to device. John Stult reported a lockup issue seen with HiKey960 platform without these steps[1]. Similar issue is observed with Ferry's testing platform[2]. So, apply the required steps along with some fixes to Yu Chen's and John Stultz's version. The main fixes to their versions are the missing wait for clocks synchronization before clearing GCTL.CoreSoftReset and only apply DCTL.CSftRst when switching from host to device. [1] https://lore.kernel.org/linux-usb/20210108015115.27920-1-john.stultz@linaro.org/ [2] https://lore.kernel.org/linux-usb/0ba7a6ba-e6a7-9cd4-0695-64fc927e01f1@gmail.com/

In the Linux kernel, the following vulnerability has been resolved: sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues efx->xdp_tx_queue_count is initially initialized to num_possible_cpus() and is later used to allocate and traverse efx->xdp_tx_queues lookup array. However, we may end up not initializing all the array slots with real queues during probing. This results, for example, in a NULL pointer dereference, when running "# ethtool -S <iface>", similar to below [2570283.664955][T4126959] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [2570283.681283][T4126959] #PF: supervisor read access in kernel mode [2570283.695678][T4126959] #PF: error_code(0x0000) - not-present page [2570283.710013][T4126959] PGD 0 P4D 0 [2570283.721649][T4126959] Oops: 0000 [#1] SMP PTI [2570283.734108][T4126959] CPU: 23 PID: 4126959 Comm: ethtool Tainted: G O 5.10.20-cloudflare-2021.3.1 #1 [2570283.752641][T4126959] Hardware name: <redacted> [2570283.781408][T4126959] RIP: 0010:efx_ethtool_get_stats+0x2ca/0x330 [sfc] [2570283.796073][T4126959] Code: 00 85 c0 74 39 48 8b 95 a8 0f 00 00 48 85 d2 74 2d 31 c0 eb 07 48 8b 95 a8 0f 00 00 48 63 c8 49 83 c4 08 83 c0 01 48 8b 14 ca <48> 8b 92 f8 00 00 00 49 89 54 24 f8 39 85 a0 0f 00 00 77 d7 48 8b [2570283.831259][T4126959] RSP: 0018:ffffb79a77657ce8 EFLAGS: 00010202 [2570283.845121][T4126959] RAX: 0000000000000019 RBX: ffffb799cd0c9280 RCX: 0000000000000018 [2570283.860872][T4126959] RDX: 0000000000000000 RSI: ffff96dd970ce000 RDI: 0000000000000005 [2570283.876525][T4126959] RBP: ffff96dd86f0a000 R08: ffff96dd970ce480 R09: 000000000000005f [2570283.892014][T4126959] R10: ffffb799cd0c9fff R11: ffffb799cd0c9000 R12: ffffb799cd0c94f8 [2570283.907406][T4126959] R13: ffffffffc11b1090 R14: ffff96dd970ce000 R15: ffffffffc11cd66c [2570283.922705][T4126959] FS: 00007fa7723f8740(0000) GS:ffff96f51fac0000(0000) knlGS:0000000000000000 [2570283.938848][T4126959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2570283.952524][T4126959] CR2: 00000000000000f8 CR3: 0000001a73e6e006 CR4: 00000000007706e0 [2570283.967529][T4126959] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [2570283.982400][T4126959] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [2570283.997308][T4126959] PKRU: 55555554 [2570284.007649][T4126959] Call Trace: [2570284.017598][T4126959] dev_ethtool+0x1832/0x2830 Fix this by adjusting efx->xdp_tx_queue_count after probing to reflect the true value of initialized slots in efx->xdp_tx_queues.

In the Linux kernel, the following vulnerability has been resolved: tracing: Restructure trace_clock_global() to never block It was reported that a fix to the ring buffer recursion detection would cause a hung machine when performing suspend / resume testing. The following backtrace was extracted from debugging that case: Call Trace: trace_clock_global+0x91/0xa0 __rb_reserve_next+0x237/0x460 ring_buffer_lock_reserve+0x12a/0x3f0 trace_buffer_lock_reserve+0x10/0x50 __trace_graph_return+0x1f/0x80 trace_graph_return+0xb7/0xf0 ? trace_clock_global+0x91/0xa0 ftrace_return_to_handler+0x8b/0xf0 ? pv_hash+0xa0/0xa0 return_to_handler+0x15/0x30 ? ftrace_graph_caller+0xa0/0xa0 ? trace_clock_global+0x91/0xa0 ? __rb_reserve_next+0x237/0x460 ? ring_buffer_lock_reserve+0x12a/0x3f0 ? trace_event_buffer_lock_reserve+0x3c/0x120 ? trace_event_buffer_reserve+0x6b/0xc0 ? trace_event_raw_event_device_pm_callback_start+0x125/0x2d0 ? dpm_run_callback+0x3b/0xc0 ? pm_ops_is_empty+0x50/0x50 ? platform_get_irq_byname_optional+0x90/0x90 ? trace_device_pm_callback_start+0x82/0xd0 ? dpm_run_callback+0x49/0xc0 With the following RIP: RIP: 0010:native_queued_spin_lock_slowpath+0x69/0x200 Since the fix to the recursion detection would allow a single recursion to happen while tracing, this lead to the trace_clock_global() taking a spin lock and then trying to take it again: ring_buffer_lock_reserve() { trace_clock_global() { arch_spin_lock() { queued_spin_lock_slowpath() { /* lock taken */ (something else gets traced by function graph tracer) ring_buffer_lock_reserve() { trace_clock_global() { arch_spin_lock() { queued_spin_lock_slowpath() { /* DEAD LOCK! */ Tracing should *never* block, as it can lead to strange lockups like the above. Restructure the trace_clock_global() code to instead of simply taking a lock to update the recorded "prev_time" simply use it, as two events happening on two different CPUs that calls this at the same time, really doesn't matter which one goes first. Use a trylock to grab the lock for updating the prev_time, and if it fails, simply try again the next time. If it failed to be taken, that means something else is already updating it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761

In the Linux kernel, the following vulnerability has been resolved: Input: appletouch - initialize work before device registration Syzbot has reported warning in __flush_work(). This warning is caused by work->func == NULL, which means missing work initialization. This may happen, since input_dev->close() calls cancel_work_sync(&dev->work), but dev->work initalization happens _after_ input_register_device() call. So this patch moves dev->work initialization before registering input device

In the Linux kernel, the following vulnerability has been resolved: parisc: Clear stale IIR value on instruction access rights trap When a trap 7 (Instruction access rights) occurs, this means the CPU couldn't execute an instruction due to missing execute permissions on the memory region. In this case it seems the CPU didn't even fetched the instruction from memory and thus did not store it in the cr19 (IIR) register before calling the trap handler. So, the trap handler will find some random old stale value in cr19. This patch simply overwrites the stale IIR value with a constant magic "bad food" value (0xbaadf00d), in the hope people don't start to try to understand the various random IIR values in trap 7 dumps.

In the Linux kernel, the following vulnerability has been resolved: padata: use integer wrap around to prevent deadlock on seq_nr overflow When submitting more than 2^32 padata objects to padata_do_serial, the current sorting implementation incorrectly sorts padata objects with overflowed seq_nr, causing them to be placed before existing objects in the reorder list. This leads to a deadlock in the serialization process as padata_find_next cannot match padata->seq_nr and pd->processed because the padata instance with overflowed seq_nr will be selected next. To fix this, we use an unsigned integer wrap around to correctly sort padata objects in scenarios with integer overflow.

nf_tables_newset in net/netfilter/nf_tables_api.c in the Linux kernel before 5.12.13 allows local users to cause a denial of service (NULL pointer dereference and general protection fault) because of the missing initialization for nft_set_elem_expr_alloc. A local user can set a netfilter table expression in their own namespace.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix shared sqpoll cancellation hangs [ 736.982891] INFO: task iou-sqp-4294:4295 blocked for more than 122 seconds. [ 736.982897] Call Trace: [ 736.982901] schedule+0x68/0xe0 [ 736.982903] io_uring_cancel_sqpoll+0xdb/0x110 [ 736.982908] io_sqpoll_cancel_cb+0x24/0x30 [ 736.982911] io_run_task_work_head+0x28/0x50 [ 736.982913] io_sq_thread+0x4e3/0x720 We call io_uring_cancel_sqpoll() one by one for each ctx either in sq_thread() itself or via task works, and it's intended to cancel all requests of a specified context. However the function uses per-task counters to track the number of inflight requests, so it counts more requests than available via currect io_uring ctx and goes to sleep for them to appear (e.g. from IRQ), that will never happen. Cancel a bit more than before, i.e. all ctxs that share sqpoll and continue to use shared counters. Don't forget that we should not remove ctx from the list before running that task_work sqpoll-cancel, otherwise the function wouldn't be able to find the context and will hang.

A race condition in the x86 KVM subsystem in the Linux kernel through 6.1-rc6 allows guest OS users to cause a denial of service (host OS crash or host OS memory corruption) when nested virtualisation and the TDP MMU are enabled.

In the Linux kernel, the following vulnerability has been resolved: ARM: 9410/1: vfp: Use asm volatile in fmrx/fmxr macros Floating point instructions in userspace can crash some arm kernels built with clang/LLD 17.0.6: BUG: unsupported FP instruction in kernel mode FPEXC == 0xc0000780 Internal error: Oops - undefined instruction: 0 [#1] ARM CPU: 0 PID: 196 Comm: vfp-reproducer Not tainted 6.10.0 #1 Hardware name: BCM2835 PC is at vfp_support_entry+0xc8/0x2cc LR is at do_undefinstr+0xa8/0x250 pc : [<c0101d50>] lr : [<c010a80c>] psr: a0000013 sp : dc8d1f68 ip : 60000013 fp : bedea19c r10: ec532b17 r9 : 00000010 r8 : 0044766c r7 : c0000780 r6 : ec532b17 r5 : c1c13800 r4 : dc8d1fb0 r3 : c10072c4 r2 : c0101c88 r1 : ec532b17 r0 : 0044766c Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 00c5387d Table: 0251c008 DAC: 00000051 Register r0 information: non-paged memory Register r1 information: vmalloc memory Register r2 information: non-slab/vmalloc memory Register r3 information: non-slab/vmalloc memory Register r4 information: 2-page vmalloc region Register r5 information: slab kmalloc-cg-2k Register r6 information: vmalloc memory Register r7 information: non-slab/vmalloc memory Register r8 information: non-paged memory Register r9 information: zero-size pointer Register r10 information: vmalloc memory Register r11 information: non-paged memory Register r12 information: non-paged memory Process vfp-reproducer (pid: 196, stack limit = 0x61aaaf8b) Stack: (0xdc8d1f68 to 0xdc8d2000) 1f60: 0000081f b6f69300 0000000f c10073f4 c10072c4 dc8d1fb0 1f80: ec532b17 0c532b17 0044766c b6f9ccd8 00000000 c010a80c 00447670 60000010 1fa0: ffffffff c1c13800 00c5387d c0100f10 b6f68af8 00448fc0 00000000 bedea188 1fc0: bedea314 00000001 00448ebc b6f9d000 00447608 b6f9ccd8 00000000 bedea19c 1fe0: bede9198 bedea188 b6e1061c 0044766c 60000010 ffffffff 00000000 00000000 Call trace: [<c0101d50>] (vfp_support_entry) from [<c010a80c>] (do_undefinstr+0xa8/0x250) [<c010a80c>] (do_undefinstr) from [<c0100f10>] (__und_usr+0x70/0x80) Exception stack(0xdc8d1fb0 to 0xdc8d1ff8) 1fa0: b6f68af8 00448fc0 00000000 bedea188 1fc0: bedea314 00000001 00448ebc b6f9d000 00447608 b6f9ccd8 00000000 bedea19c 1fe0: bede9198 bedea188 b6e1061c 0044766c 60000010 ffffffff Code: 0a000061 e3877202 e594003c e3a09010 (eef16a10) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception in interrupt ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- This is a minimal userspace reproducer on a Raspberry Pi Zero W: #include <stdio.h> #include <math.h> int main(void) { double v = 1.0; printf("%fn", NAN + *(volatile double *)&v); return 0; } Another way to consistently trigger the oops is: calvin@raspberry-pi-zero-w ~$ python -c "import json" The bug reproduces only when the kernel is built with DYNAMIC_DEBUG=n, because the pr_debug() calls act as barriers even when not activated. This is the output from the same kernel source built with the same compiler and DYNAMIC_DEBUG=y, where the userspace reproducer works as expected: VFP: bounce: trigger ec532b17 fpexc c0000780 VFP: emulate: INST=0xee377b06 SCR=0x00000000 VFP: bounce: trigger eef1fa10 fpexc c0000780 VFP: emulate: INST=0xeeb40b40 SCR=0x00000000 VFP: raising exceptions 30000000 calvin@raspberry-pi-zero-w ~$ ./vfp-reproducer nan Crudely grepping for vmsr/vmrs instructions in the otherwise nearly idential text for vfp_support_entry() makes the problem obvious: vmlinux.llvm.good [0xc0101cb8] <+48>: vmrs r7, fpexc vmlinux.llvm.good [0xc0101cd8] <+80>: vmsr fpexc, r0 vmlinux.llvm.good [0xc0101d20 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: driver core: Fix a potential null-ptr-deref in module_add_driver() Inject fault while probing of-fpga-region, if kasprintf() fails in module_add_driver(), the second sysfs_remove_link() in exit path will cause null-ptr-deref as below because kernfs_name_hash() will call strlen() with NULL driver_name. Fix it by releasing resources based on the exit path sequence. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfffffc000000000] address between user and kernel address ranges Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: of_fpga_region(+) fpga_region fpga_bridge cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: of_fpga_region] CPU: 2 UID: 0 PID: 2036 Comm: modprobe Not tainted 6.11.0-rc2-g6a0e38264012 #295 Hardware name: linux,dummy-virt (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : strlen+0x24/0xb0 lr : kernfs_name_hash+0x1c/0xc4 sp : ffffffc081f97380 x29: ffffffc081f97380 x28: ffffffc081f97b90 x27: ffffff80c821c2a0 x26: ffffffedac0be418 x25: 0000000000000000 x24: ffffff80c09d2000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000001840 x17: 0000000000000000 x16: 0000000000000000 x15: 1ffffff8103f2e42 x14: 00000000f1f1f1f1 x13: 0000000000000004 x12: ffffffb01812d61d x11: 1ffffff01812d61c x10: ffffffb01812d61c x9 : dfffffc000000000 x8 : 0000004fe7ed29e4 x7 : ffffff80c096b0e7 x6 : 0000000000000001 x5 : ffffff80c096b0e0 x4 : 1ffffffdb990efa2 x3 : 0000000000000000 x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000000 Call trace: strlen+0x24/0xb0 kernfs_name_hash+0x1c/0xc4 kernfs_find_ns+0x118/0x2e8 kernfs_remove_by_name_ns+0x80/0x100 sysfs_remove_link+0x74/0xa8 module_add_driver+0x278/0x394 bus_add_driver+0x1f0/0x43c driver_register+0xf4/0x3c0 __platform_driver_register+0x60/0x88 of_fpga_region_init+0x20/0x1000 [of_fpga_region] do_one_initcall+0x110/0x788 do_init_module+0x1dc/0x5c8 load_module+0x3c38/0x4cac init_module_from_file+0xd4/0x128 idempotent_init_module+0x2cc/0x528 __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x48/0xb8 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: f2fbffe1 a90157f4 12000802 aa0003f5 (38e16861) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: ch_ktls: Fix kernel panic Taking page refcount is not ideal and causes kernel panic sometimes. It's better to take tx_ctx lock for the complete skb transmit, to avoid page cleanup if ACK received in middle.

In the Linux kernel, the following vulnerability has been resolved: ext4: always panic when errors=panic is specified Before commit 014c9caa29d3 ("ext4: make ext4_abort() use __ext4_error()"), the following series of commands would trigger a panic: 1. mount /dev/sda -o ro,errors=panic test 2. mount /dev/sda -o remount,abort test After commit 014c9caa29d3, remounting a file system using the test mount option "abort" will no longer trigger a panic. This commit will restore the behaviour immediately before commit 014c9caa29d3. (However, note that the Linux kernel's behavior has not been consistent; some previous kernel versions, including 5.4 and 4.19 similarly did not panic after using the mount option "abort".) This also makes a change to long-standing behaviour; namely, the following series commands will now cause a panic, when previously it did not: 1. mount /dev/sda -o ro,errors=panic test 2. echo test > /sys/fs/ext4/sda/trigger_fs_error However, this makes ext4's behaviour much more consistent, so this is a good thing.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Wrap the tx reporter dump callback to extract the sq Function mlx5e_tx_reporter_dump_sq() casts its void * argument to struct mlx5e_txqsq *, but in TX-timeout-recovery flow the argument is actually of type struct mlx5e_tx_timeout_ctx *. mlx5_core 0000:08:00.1 enp8s0f1: TX timeout detected mlx5_core 0000:08:00.1 enp8s0f1: TX timeout on queue: 1, SQ: 0x11ec, CQ: 0x146d, SQ Cons: 0x0 SQ Prod: 0x1, usecs since last trans: 21565000 BUG: stack guard page was hit at 0000000093f1a2de (stack is 00000000b66ea0dc..000000004d932dae) kernel stack overflow (page fault): 0000 [#1] SMP NOPTI CPU: 5 PID: 95 Comm: kworker/u20:1 Tainted: G W OE 5.13.0_mlnx #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180 [mlx5_core] Call Trace: mlx5e_tx_reporter_dump+0x43/0x1c0 [mlx5_core] devlink_health_do_dump.part.91+0x71/0xd0 devlink_health_report+0x157/0x1b0 mlx5e_reporter_tx_timeout+0xb9/0xf0 [mlx5_core] ? mlx5e_tx_reporter_err_cqe_recover+0x1d0/0x1d0 [mlx5_core] ? mlx5e_health_queue_dump+0xd0/0xd0 [mlx5_core] ? update_load_avg+0x19b/0x550 ? set_next_entity+0x72/0x80 ? pick_next_task_fair+0x227/0x340 ? finish_task_switch+0xa2/0x280 mlx5e_tx_timeout_work+0x83/0xb0 [mlx5_core] process_one_work+0x1de/0x3a0 worker_thread+0x2d/0x3c0 ? process_one_work+0x3a0/0x3a0 kthread+0x115/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 --[ end trace 51ccabea504edaff ]--- RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled end Kernel panic - not syncing: Fatal exception To fix this bug add a wrapper for mlx5e_tx_reporter_dump_sq() which extracts the sq from struct mlx5e_tx_timeout_ctx and set it as the TX-timeout-recovery flow dump callback.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for set_output_gamma in dcn30_set_output_transfer_func This commit adds a null check for the set_output_gamma function pointer in the dcn30_set_output_transfer_func function. Previously, set_output_gamma was being checked for nullity at line 386, but then it was being dereferenced without any nullity check at line 401. This could potentially lead to a null pointer dereference error if set_output_gamma is indeed null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a nullity check for set_output_gamma before the call to set_output_gamma at line 401. If set_output_gamma is null, we log an error message and do not call the function. This fix prevents a potential null pointer dereference error. drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:401 dcn30_set_output_transfer_func() error: we previously assumed 'mpc->funcs->set_output_gamma' could be null (see line 386) drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c 373 bool dcn30_set_output_transfer_func(struct dc *dc, 374 struct pipe_ctx *pipe_ctx, 375 const struct dc_stream_state *stream) 376 { 377 int mpcc_id = pipe_ctx->plane_res.hubp->inst; 378 struct mpc *mpc = pipe_ctx->stream_res.opp->ctx->dc->res_pool->mpc; 379 const struct pwl_params *params = NULL; 380 bool ret = false; 381 382 /* program OGAM or 3DLUT only for the top pipe*/ 383 if (pipe_ctx->top_pipe == NULL) { 384 /*program rmu shaper and 3dlut in MPC*/ 385 ret = dcn30_set_mpc_shaper_3dlut(pipe_ctx, stream); 386 if (ret == false && mpc->funcs->set_output_gamma) { ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If this is NULL 387 if (stream->out_transfer_func.type == TF_TYPE_HWPWL) 388 params = &stream->out_transfer_func.pwl; 389 else if (pipe_ctx->stream->out_transfer_func.type == 390 TF_TYPE_DISTRIBUTED_POINTS && 391 cm3_helper_translate_curve_to_hw_format( 392 &stream->out_transfer_func, 393 &mpc->blender_params, false)) 394 params = &mpc->blender_params; 395 /* there are no ROM LUTs in OUTGAM */ 396 if (stream->out_transfer_func.type == TF_TYPE_PREDEFINED) 397 BREAK_TO_DEBUGGER(); 398 } 399 } 400 --> 401 mpc->funcs->set_output_gamma(mpc, mpcc_id, params); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Then it will crash 402 return ret; 403 }

In the Linux kernel, the following vulnerability has been resolved: netfilter: nftables: clone set element expression template memcpy() breaks when using connlimit in set elements. Use nft_expr_clone() to initialize the connlimit expression list, otherwise connlimit garbage collector crashes when walking on the list head copy. [ 493.064656] Workqueue: events_power_efficient nft_rhash_gc [nf_tables] [ 493.064685] RIP: 0010:find_or_evict+0x5a/0x90 [nf_conncount] [ 493.064694] Code: 2b 43 40 83 f8 01 77 0d 48 c7 c0 f5 ff ff ff 44 39 63 3c 75 df 83 6d 18 01 48 8b 43 08 48 89 de 48 8b 13 48 8b 3d ee 2f 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 03 48 83 [ 493.064699] RSP: 0018:ffffc90000417dc0 EFLAGS: 00010297 [ 493.064704] RAX: 0000000000000000 RBX: ffff888134f38410 RCX: 0000000000000000 [ 493.064708] RDX: 0000000000000000 RSI: ffff888134f38410 RDI: ffff888100060cc0 [ 493.064711] RBP: ffff88812ce594a8 R08: ffff888134f38438 R09: 00000000ebb9025c [ 493.064714] R10: ffffffff8219f838 R11: 0000000000000017 R12: 0000000000000001 [ 493.064718] R13: ffffffff82146740 R14: ffff888134f38410 R15: 0000000000000000 [ 493.064721] FS: 0000000000000000(0000) GS:ffff88840e440000(0000) knlGS:0000000000000000 [ 493.064725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 493.064729] CR2: 0000000000000008 CR3: 00000001330aa002 CR4: 00000000001706e0 [ 493.064733] Call Trace: [ 493.064737] nf_conncount_gc_list+0x8f/0x150 [nf_conncount] [ 493.064746] nft_rhash_gc+0x106/0x390 [nf_tables]

In the Linux kernel, the following vulnerability has been resolved: sfc: farch: fix TX queue lookup in TX event handling We're starting from a TXQ label, not a TXQ type, so efx_channel_get_tx_queue() is inappropriate (and could return NULL, leading to panics).

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Add tx check to prevent skb leak Below is a summary of how the driver stores a reference to an skb during transmit: tx_buff[free_map[consumer_index]]->skb = new_skb; free_map[consumer_index] = IBMVNIC_INVALID_MAP; consumer_index ++; Where variable data looks like this: free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3] consumer_index^ tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null] The driver has checks to ensure that free_map[consumer_index] pointed to a valid index but there was no check to ensure that this index pointed to an unused/null skb address. So, if, by some chance, our free_map and tx_buff lists become out of sync then we were previously risking an skb memory leak. This could then cause tcp congestion control to stop sending packets, eventually leading to ETIMEDOUT. Therefore, add a conditional to ensure that the skb address is null. If not then warn the user (because this is still a bug that should be patched) and free the old pointer to prevent memleak/tcp problems.

In the Linux kernel, the following vulnerability has been resolved: ixgbe: Fix NULL pointer dereference in ethtool loopback test The ixgbe driver currently generates a NULL pointer dereference when performing the ethtool loopback test. This is due to the fact that there isn't a q_vector associated with the test ring when it is setup as interrupts are not normally added to the test rings. To address this I have added code that will check for a q_vector before returning a napi_id value. If a q_vector is not present it will return a value of 0.

In the Linux kernel, the following vulnerability has been resolved: ARM: footbridge: fix PCI interrupt mapping Since commit 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()"), the PCI code will call the IRQ mapping function whenever a PCI driver is probed. If these are marked as __init, this causes an oops if a PCI driver is loaded or bound after the kernel has initialised.

In the Linux kernel, the following vulnerability has been resolved: sfc: farch: fix TX queue lookup in TX flush done handling We're starting from a TXQ instance number ('qid'), not a TXQ type, so efx_get_tx_queue() is inappropriate (and could return NULL, leading to panics).

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix TPM reservation for seal/unseal The original patch 8c657a0590de ("KEYS: trusted: Reserve TPM for seal and unseal operations") was correct on the mailing list: https://lore.kernel.org/linux-integrity/20210128235621.127925-4-jarkko@kernel.org/ But somehow got rebased so that the tpm_try_get_ops() in tpm2_seal_trusted() got lost. This causes an imbalanced put of the TPM ops and causes oopses on TIS based hardware. This fix puts back the lost tpm_try_get_ops()

In the Linux kernel, the following vulnerability has been resolved: spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op() In zynq_qspi_exec_mem_op(), kzalloc() is directly used in memset(), which could lead to a NULL pointer dereference on failure of kzalloc(). Fix this bug by adding a check of tmpbuf. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_SPI_ZYNQ_QSPI=m show no new warnings, and our static analyzer no longer warns about this code.