In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix mr leak in RESPST_ERR_RNR rxe_recheck_mr() will increase mr's ref_cnt, so we should call rxe_put(mr) to drop mr's ref_cnt in RESPST_ERR_RNR to avoid below warning: WARNING: CPU: 0 PID: 4156 at drivers/infiniband/sw/rxe/rxe_pool.c:259 __rxe_cleanup+0x1df/0x240 [rdma_rxe] ... Call Trace: rxe_dereg_mr+0x4c/0x60 [rdma_rxe] ib_dereg_mr_user+0xa8/0x200 [ib_core] ib_mr_pool_destroy+0x77/0xb0 [ib_core] nvme_rdma_destroy_queue_ib+0x89/0x240 [nvme_rdma] nvme_rdma_free_queue+0x40/0x50 [nvme_rdma] nvme_rdma_teardown_io_queues.part.0+0xc3/0x120 [nvme_rdma] nvme_rdma_error_recovery_work+0x4d/0xf0 [nvme_rdma] process_one_work+0x582/0xa40 ? pwq_dec_nr_in_flight+0x100/0x100 ? rwlock_bug.part.0+0x60/0x60 worker_thread+0x2a9/0x700 ? process_one_work+0xa40/0xa40 kthread+0x168/0x1a0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30

In the Linux kernel, the following vulnerability has been resolved: iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table() modprobe iio-test-gts and rmmod it, then the following memory leak occurs: unreferenced object 0xffffff80c810be00 (size 64): comm "kunit_try_catch", pid 1654, jiffies 4294913981 hex dump (first 32 bytes): 02 00 00 00 08 00 00 00 20 00 00 00 40 00 00 00 ........ ...@... 80 00 00 00 00 02 00 00 00 04 00 00 00 08 00 00 ................ backtrace (crc a63d875e): [<0000000028c1b3c2>] kmemleak_alloc+0x34/0x40 [<000000001d6ecc87>] __kmalloc_noprof+0x2bc/0x3c0 [<00000000393795c1>] devm_iio_init_iio_gts+0x4b4/0x16f4 [<0000000071bb4b09>] 0xffffffdf052a62e0 [<000000000315bc18>] 0xffffffdf052a6488 [<00000000f9dc55b5>] kunit_try_run_case+0x13c/0x3ac [<00000000175a3fd4>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000f505065d>] kthread+0x2e8/0x374 [<00000000bbfb0e5d>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cbfe9e70 (size 16): comm "kunit_try_catch", pid 1658, jiffies 4294914015 hex dump (first 16 bytes): 10 00 00 00 40 00 00 00 80 00 00 00 00 00 00 00 ....@........... backtrace (crc 857f0cb4): [<0000000028c1b3c2>] kmemleak_alloc+0x34/0x40 [<000000001d6ecc87>] __kmalloc_noprof+0x2bc/0x3c0 [<00000000393795c1>] devm_iio_init_iio_gts+0x4b4/0x16f4 [<0000000071bb4b09>] 0xffffffdf052a62e0 [<000000007d089d45>] 0xffffffdf052a6864 [<00000000f9dc55b5>] kunit_try_run_case+0x13c/0x3ac [<00000000175a3fd4>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000f505065d>] kthread+0x2e8/0x374 [<00000000bbfb0e5d>] ret_from_fork+0x10/0x20 ...... It includes 5*5 times "size 64" memory leaks, which correspond to 5 times test_init_iio_gain_scale() calls with gts_test_gains size 10 (10*size(int)) and gts_test_itimes size 5. It also includes 5*1 times "size 16" memory leak, which correspond to one time __test_init_iio_gain_scale() call with gts_test_gains_gain_low size 3 (3*size(int)) and gts_test_itimes size 5. The reason is that the per_time_gains[i] is not freed which is allocated in the "gts->num_itime" for loop in iio_gts_build_avail_scale_table().

In the Linux kernel, the following vulnerability has been resolved: usbnet: fix memory leak in error case usbnet_write_cmd_async() mixed up which buffers need to be freed in which error case. v2: add Fixes tag v3: fix uninitialized buf pointer

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-glue: fix memory leak when register device fail If device_register() fails, it should call put_device() to give up reference, the name allocated in dev_set_name() can be freed in callback function kobject_cleanup().

In the Linux kernel, the following vulnerability has been resolved: nfc: nxp-nci: Fix potential memory leak in nxp_nci_send() nxp_nci_send() will call nxp_nci_i2c_write(), and only free skb when nxp_nci_i2c_write() failed. However, even if the nxp_nci_i2c_write() run succeeds, the skb will not be freed in nxp_nci_i2c_write(). As the result, the skb will memleak. nxp_nci_send() should also free the skb when nxp_nci_i2c_write() succeeds.

In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix skb leak in x25_lapb_receive_frame() x25_lapb_receive_frame() using skb_copy() to get a private copy of skb, the new skb should be freed in the undersized/fragmented skb error handling path. Otherwise there is a memory leak.

In the Linux kernel, the following vulnerability has been resolved: drm/drv: Fix potential memory leak in drm_dev_init() drm_dev_init() will add drm_dev_init_release() as a callback. When drmm_add_action() failed, the release function won't be added. As the result, the ref cnt added by device_get() in drm_dev_init() won't be put by drm_dev_init_release(), which leads to the memleak. Use drmm_add_action_or_reset() instead of drmm_add_action() to prevent memleak. unreferenced object 0xffff88810bc0c800 (size 2048): comm "modprobe", pid 8322, jiffies 4305809845 (age 15.292s) hex dump (first 32 bytes): e8 cc c0 0b 81 88 ff ff ff ff ff ff 00 00 00 00 ................ 20 24 3c 0c 81 88 ff ff 18 c8 c0 0b 81 88 ff ff $<............. backtrace: [<000000007251f72d>] __kmalloc+0x4b/0x1c0 [<0000000045f21f26>] platform_device_alloc+0x2d/0xe0 [<000000004452a479>] platform_device_register_full+0x24/0x1c0 [<0000000089f4ea61>] 0xffffffffa0736051 [<00000000235b2441>] do_one_initcall+0x7a/0x380 [<0000000001a4a177>] do_init_module+0x5c/0x230 [<000000002bf8a8e2>] load_module+0x227d/0x2420 [<00000000637d6d0a>] __do_sys_finit_module+0xd5/0x140 [<00000000c99fc324>] do_syscall_64+0x3f/0x90 [<000000004d85aa77>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: octeon_ep: fix potential memory leak in octep_device_setup() When occur unsupported_dev and mbox init errors, it did not free oct->conf and iounmap() oct->mmio[i].hw_addr. That would trigger memory leak problem. Add kfree() for oct->conf and iounmap() for oct->mmio[i].hw_addr under unsupported_dev and mbox init errors to fix the problem.

In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix possible leaked pernet namespace in smc_init() In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called without any error handling. If it fails, registering of &smc_net_ops won't be reverted. And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted. This leaves wild ops in subsystem linkedlist and when another module tries to call register_pernet_operations() it triggers page fault: BUG: unable to handle page fault for address: fffffbfff81b964c RIP: 0010:register_pernet_operations+0x1b9/0x5f0 Call Trace: <TASK> register_pernet_subsys+0x29/0x40 ebtables_init+0x58/0x1000 [ebtables] ...

In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Fix memory leak in amd_sfh_work Kmemleak tool detected a memory leak in the amd_sfh driver. ==================== unreferenced object 0xffff88810228ada0 (size 32): comm "insmod", pid 3968, jiffies 4295056001 (age 775.792s) hex dump (first 32 bytes): 00 20 73 1f 81 88 ff ff 00 01 00 00 00 00 ad de . s............. 22 01 00 00 00 00 ad de 01 00 02 00 00 00 00 00 "............... backtrace: [<000000007b4c8799>] kmem_cache_alloc_trace+0x163/0x4f0 [<0000000005326893>] amd_sfh_get_report+0xa4/0x1d0 [amd_sfh] [<000000002a9e5ec4>] amdtp_hid_request+0x62/0x80 [amd_sfh] [<00000000b8a95807>] sensor_hub_get_feature+0x145/0x270 [hid_sensor_hub] [<00000000fda054ee>] hid_sensor_parse_common_attributes+0x215/0x460 [hid_sensor_iio_common] [<0000000021279ecf>] hid_accel_3d_probe+0xff/0x4a0 [hid_sensor_accel_3d] [<00000000915760ce>] platform_probe+0x6a/0xd0 [<0000000060258a1f>] really_probe+0x192/0x620 [<00000000fa812f2d>] driver_probe_device+0x14a/0x1d0 [<000000005e79f7fd>] __device_attach_driver+0xbd/0x110 [<0000000070d15018>] bus_for_each_drv+0xfd/0x160 [<0000000013a3c312>] __device_attach+0x18b/0x220 [<000000008c7b4afc>] device_initial_probe+0x13/0x20 [<00000000e6e99665>] bus_probe_device+0xfe/0x120 [<00000000833fa90b>] device_add+0x6a6/0xe00 [<00000000fa901078>] platform_device_add+0x180/0x380 ==================== The fix is to freeing request_list entry once the processed entry is removed from the request_list.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu() Two bugs exist in the vCPU initialisation path: 1. If a check fails after hyp_pin_shared_mem() succeeds, the cleanup path jumps to 'unlock' without calling unpin_host_vcpu() or unpin_host_sve_state(), permanently leaking pin references on the host vCPU and SVE state pages. Extract a register_hyp_vcpu() helper that performs the checks and the store. When register_hyp_vcpu() returns an error, call unpin_host_vcpu() and unpin_host_sve_state() inline before falling through to the existing 'unlock' label. 2. register_hyp_vcpu() publishes the new vCPU pointer into 'hyp_vm->vcpus[]' with a bare store, allowing a concurrent caller of pkvm_load_hyp_vcpu() to observe a partially initialised vCPU object. Ensure the store uses smp_store_release() and the load uses smp_load_acquire(). While 'vm_table_lock' currently serialises the store and the load, these barriers ensure the reader sees the fully initialised 'hyp_vcpu' object even if there were a lockless path or if the lock's own ordering guarantees were insufficient for nested object initialization.

An issue was discovered in the Linux kernel before 5.11.11. The user mode driver (UMD) has a copy_process() memory leak, related to a lack of cleanup steps in kernel/usermode_driver.c and kernel/bpf/preload/bpf_preload_kern.c, aka CID-f60a85cad677.

In the Linux kernel, the following vulnerability has been resolved: driver core: fix resource leak in device_add() When calling kobject_add() failed in device_add(), it will call cleanup_glue_dir() to free resource. But in kobject_add(), dev->kobj.parent has been set to NULL. This will cause resource leak. The process is as follows: device_add() get_device_parent() class_dir_create_and_add() kobject_add() //kobject_get() ... dev->kobj.parent = kobj; ... kobject_add() //failed, but set dev->kobj.parent = NULL ... glue_dir = get_glue_dir(dev) //glue_dir = NULL, and goto //"Error" label ... cleanup_glue_dir() //becaues glue_dir is NULL, not call //kobject_put() The preceding problem may cause insmod mac80211_hwsim.ko to failed. sysfs: cannot create duplicate filename '/devices/virtual/mac80211_hwsim' Call Trace: <TASK> dump_stack_lvl+0x8e/0xd1 sysfs_warn_dup.cold+0x1c/0x29 sysfs_create_dir_ns+0x224/0x280 kobject_add_internal+0x2aa/0x880 kobject_add+0x135/0x1a0 get_device_parent+0x3d7/0x590 device_add+0x2aa/0x1cb0 device_create_groups_vargs+0x1eb/0x260 device_create+0xdc/0x110 mac80211_hwsim_new_radio+0x31e/0x4790 [mac80211_hwsim] init_mac80211_hwsim+0x48d/0x1000 [mac80211_hwsim] do_one_initcall+0x10f/0x630 do_init_module+0x19f/0x5e0 load_module+0x64b7/0x6eb0 __do_sys_finit_module+0x140/0x200 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> kobject_add_internal failed for mac80211_hwsim with -EEXIST, don't try to register things with the same name in the same directory.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix memory leaks in i915 selftests This patch fixes memory leaks on error escapes in function fake_get_pages (cherry picked from commit 8bfbdadce85c4c51689da10f39c805a7106d4567)

In the Linux kernel, the following vulnerability has been resolved: btrfs: free exchange changeset on failures Fstests runs on my VMs have show several kmemleak reports like the following. unreferenced object 0xffff88811ae59080 (size 64): comm "xfs_io", pid 12124, jiffies 4294987392 (age 6.368s) hex dump (first 32 bytes): 00 c0 1c 00 00 00 00 00 ff cf 1c 00 00 00 00 00 ................ 90 97 e5 1a 81 88 ff ff 90 97 e5 1a 81 88 ff ff ................ backtrace: [<00000000ac0176d2>] ulist_add_merge+0x60/0x150 [btrfs] [<0000000076e9f312>] set_state_bits+0x86/0xc0 [btrfs] [<0000000014fe73d6>] set_extent_bit+0x270/0x690 [btrfs] [<000000004f675208>] set_record_extent_bits+0x19/0x20 [btrfs] [<00000000b96137b1>] qgroup_reserve_data+0x274/0x310 [btrfs] [<0000000057e9dcbb>] btrfs_check_data_free_space+0x5c/0xa0 [btrfs] [<0000000019c4511d>] btrfs_delalloc_reserve_space+0x1b/0xa0 [btrfs] [<000000006d37e007>] btrfs_dio_iomap_begin+0x415/0x970 [btrfs] [<00000000fb8a74b8>] iomap_iter+0x161/0x1e0 [<0000000071dff6ff>] __iomap_dio_rw+0x1df/0x700 [<000000002567ba53>] iomap_dio_rw+0x5/0x20 [<0000000072e555f8>] btrfs_file_write_iter+0x290/0x530 [btrfs] [<000000005eb3d845>] new_sync_write+0x106/0x180 [<000000003fb505bf>] vfs_write+0x24d/0x2f0 [<000000009bb57d37>] __x64_sys_pwrite64+0x69/0xa0 [<000000003eba3fdf>] do_syscall_64+0x43/0x90 In case brtfs_qgroup_reserve_data() or btrfs_delalloc_reserve_metadata() fail the allocated extent_changeset will not be freed. So in btrfs_check_data_free_space() and btrfs_delalloc_reserve_space() free the allocated extent_changeset to get rid of the allocated memory. The issue currently only happens in the direct IO write path, but only after 65b3c08606e5 ("btrfs: fix ENOSPC failure when attempting direct IO write into NOCOW range"), and also at defrag_one_locked_target(). Every other place is always calling extent_changeset_free() even if its call to btrfs_delalloc_reserve_space() or btrfs_check_data_free_space() has failed.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: fix acpi parse and parseext cache leaks ACPICA commit 8829e70e1360c81e7a5a901b5d4f48330e021ea5 I'm Seunghun Han, and I work for National Security Research Institute of South Korea. I have been doing a research on ACPI and found an ACPI cache leak in ACPI early abort cases. Boot log of ACPI cache leak is as follows: [ 0.352414] ACPI: Added _OSI(Module Device) [ 0.353182] ACPI: Added _OSI(Processor Device) [ 0.353182] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.353182] ACPI: Added _OSI(Processor Aggregator Device) [ 0.356028] ACPI: Unable to start the ACPI Interpreter [ 0.356799] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) [ 0.360215] kmem_cache_destroy Acpi-State: Slab cache still has objects [ 0.360648] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #10 [ 0.361273] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.361873] Call Trace: [ 0.362243] ? dump_stack+0x5c/0x81 [ 0.362591] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.362944] ? acpi_sleep_proc_init+0x27/0x27 [ 0.363296] ? acpi_os_delete_cache+0xa/0x10 [ 0.363646] ? acpi_ut_delete_caches+0x6d/0x7b [ 0.364000] ? acpi_terminate+0xa/0x14 [ 0.364000] ? acpi_init+0x2af/0x34f [ 0.364000] ? __class_create+0x4c/0x80 [ 0.364000] ? video_setup+0x7f/0x7f [ 0.364000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.364000] ? do_one_initcall+0x4e/0x1a0 [ 0.364000] ? kernel_init_freeable+0x189/0x20a [ 0.364000] ? rest_init+0xc0/0xc0 [ 0.364000] ? kernel_init+0xa/0x100 [ 0.364000] ? ret_from_fork+0x25/0x30 I analyzed this memory leak in detail. I found that “Acpi-State” cache and “Acpi-Parse” cache were merged because the size of cache objects was same slab cache size. I finally found “Acpi-Parse” cache and “Acpi-parse_ext” cache were leaked using SLAB_NEVER_MERGE flag in kmem_cache_create() function. Real ACPI cache leak point is as follows: [ 0.360101] ACPI: Added _OSI(Module Device) [ 0.360101] ACPI: Added _OSI(Processor Device) [ 0.360101] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.361043] ACPI: Added _OSI(Processor Aggregator Device) [ 0.364016] ACPI: Unable to start the ACPI Interpreter [ 0.365061] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) [ 0.368174] kmem_cache_destroy Acpi-Parse: Slab cache still has objects [ 0.369332] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #8 [ 0.371256] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.372000] Call Trace: [ 0.372000] ? dump_stack+0x5c/0x81 [ 0.372000] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.372000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.372000] ? acpi_os_delete_cache+0xa/0x10 [ 0.372000] ? acpi_ut_delete_caches+0x56/0x7b [ 0.372000] ? acpi_terminate+0xa/0x14 [ 0.372000] ? acpi_init+0x2af/0x34f [ 0.372000] ? __class_create+0x4c/0x80 [ 0.372000] ? video_setup+0x7f/0x7f [ 0.372000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.372000] ? do_one_initcall+0x4e/0x1a0 [ 0.372000] ? kernel_init_freeable+0x189/0x20a [ 0.372000] ? rest_init+0xc0/0xc0 [ 0.372000] ? kernel_init+0xa/0x100 [ 0.372000] ? ret_from_fork+0x25/0x30 [ 0.388039] kmem_cache_destroy Acpi-parse_ext: Slab cache still has objects [ 0.389063] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #8 [ 0.390557] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.392000] Call Trace: [ 0.392000] ? dump_stack+0x5c/0x81 [ 0.392000] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.392000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.392000] ? acpi_os_delete_cache+0xa/0x10 [ 0.392000] ? acpi_ut_delete_caches+0x6d/0x7b [ 0.392000] ? acpi_terminate+0xa/0x14 [ 0.392000] ? acpi_init+0x2af/0x3 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix kmemleak in watchdog_cdev_register kmemleak reports memory leaks in watchdog_dev_register, as follows: unreferenced object 0xffff888116233000 (size 2048): comm ""modprobe"", pid 28147, jiffies 4353426116 (age 61.741s) hex dump (first 32 bytes): 80 fa b9 05 81 88 ff ff 08 30 23 16 81 88 ff ff .........0#..... 08 30 23 16 81 88 ff ff 00 00 00 00 00 00 00 00 .0#............. backtrace: [<000000007f001ffd>] __kmem_cache_alloc_node+0x157/0x220 [<000000006a389304>] kmalloc_trace+0x21/0x110 [<000000008d640eea>] watchdog_dev_register+0x4e/0x780 [watchdog] [<0000000053c9f248>] __watchdog_register_device+0x4f0/0x680 [watchdog] [<00000000b2979824>] watchdog_register_device+0xd2/0x110 [watchdog] [<000000001f730178>] 0xffffffffc10880ae [<000000007a1a8bcc>] do_one_initcall+0xcb/0x4d0 [<00000000b98be325>] do_init_module+0x1ca/0x5f0 [<0000000046d08e7c>] load_module+0x6133/0x70f0 ... unreferenced object 0xffff888105b9fa80 (size 16): comm ""modprobe"", pid 28147, jiffies 4353426116 (age 61.741s) hex dump (first 16 bytes): 77 61 74 63 68 64 6f 67 31 00 b9 05 81 88 ff ff watchdog1....... backtrace: [<000000007f001ffd>] __kmem_cache_alloc_node+0x157/0x220 [<00000000486ab89b>] __kmalloc_node_track_caller+0x44/0x1b0 [<000000005a39aab0>] kvasprintf+0xb5/0x140 [<0000000024806f85>] kvasprintf_const+0x55/0x180 [<000000009276cb7f>] kobject_set_name_vargs+0x56/0x150 [<00000000a92e820b>] dev_set_name+0xab/0xe0 [<00000000cec812c6>] watchdog_dev_register+0x285/0x780 [watchdog] [<0000000053c9f248>] __watchdog_register_device+0x4f0/0x680 [watchdog] [<00000000b2979824>] watchdog_register_device+0xd2/0x110 [watchdog] [<000000001f730178>] 0xffffffffc10880ae [<000000007a1a8bcc>] do_one_initcall+0xcb/0x4d0 [<00000000b98be325>] do_init_module+0x1ca/0x5f0 [<0000000046d08e7c>] load_module+0x6133/0x70f0 ... The reason is that put_device is not be called if cdev_device_add fails and wdd->id != 0. watchdog_cdev_register wd_data = kzalloc [1] err = dev_set_name [2] .. err = cdev_device_add if (err) { if (wdd->id == 0) { // wdd->id != 0 .. } return err; // [1],[2] would be leaked To fix it, call put_device in all wdd->id cases.

In the Linux kernel, the following vulnerability has been resolved: kernel/printk/index.c: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix memleak due to fentry attach failure If it fails to attach fentry, the allocated bpf trampoline image will be left in the system. That can be verified by checking /proc/kallsyms. This meamleak can be verified by a simple bpf program as follows: SEC("fentry/trap_init") int fentry_run() { return 0; } It will fail to attach trap_init because this function is freed after kernel init, and then we can find the trampoline image is left in the system by checking /proc/kallsyms. $ tail /proc/kallsyms ffffffffc0613000 t bpf_trampoline_6442453466_1 [bpf] ffffffffc06c3000 t bpf_trampoline_6442453466_1 [bpf] $ bpftool btf dump file /sys/kernel/btf/vmlinux | grep "FUNC 'trap_init'" [2522] FUNC 'trap_init' type_id=119 linkage=static $ echo $((6442453466 & 0x7fffffff)) 2522 Note that there are two left bpf trampoline images, that is because the libbpf will fallback to raw tracepoint if -EINVAL is returned.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: tegra: Fix memory leak in terminate_all() Terminate vdesc when terminating an ongoing transfer. This will ensure that the vdesc is present in the desc_terminated list The descriptor will be freed later in desc_free_list(). This fixes the memory leaks which can happen when terminating an ongoing transfer.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix a memory leak with reused mmap_offset drm_vma_node_allow() and drm_vma_node_revoke() should be called in balanced pairs. We call drm_vma_node_allow() once per-file everytime a user calls mmap_offset, but only call drm_vma_node_revoke once per-file on each mmap_offset. As the mmap_offset is reused by the client, the per-file vm_count may remain non-zero and the rbtree leaked. Call drm_vma_node_allow_once() instead to prevent that memory leak.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix throttle_groups memory leak Add a missing kfree().

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix a devres leak in hw_enable upon suspend resume Each time the platform goes to low power, PM suspend / resume routines call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset(). This adds a new devres each time. This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be called from udc_start(). This can be seen with tracing: - echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable - go to low power - cat /sys/kernel/debug/tracing/trace A new "ADD" entry is found upon each low power cycle: ... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes) ... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes) ... A second issue is addressed here: - regulator_bulk_enable() is called upon each PM cycle (suspend/resume). - regulator_bulk_disable() never gets called. So the reference count for these regulators constantly increase, by one upon each low power cycle, due to missing regulator_bulk_disable() call in __dwc2_lowlevel_hw_disable(). The original fix that introduced the devm_add_action_or_reset() call, fixed an issue during probe, that happens due to other errors in dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL. Rather fix the error path: disable all the low level hardware in the error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable(). "ll_hw_enabled" should achieve the same (and is used currently in the remove() routine).

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: pxa25x_udc: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: media: iris: gen2: Add sanity check for session stop In iris_kill_session, inst->state is set to IRIS_INST_ERROR and session_close is executed, which will kfree(inst_hfi_gen2->packet). If stop_streaming is called afterward, it will cause a crash. Add a NULL check for inst_hfi_gen2->packet before sendling STOP packet to firmware to fix that.

In the Linux kernel, the following vulnerability has been resolved: samples/bpf: Fix fout leak in hbm's run_bpf_prog Fix fout being fopen'ed but then not subsequently fclose'd. In the affected branch, fout is otherwise going out of scope.

In the Linux kernel, the following vulnerability has been resolved: nommu: fix memory leak in do_mmap() error path The preallocation of the maple tree nodes may leak if the error path to "error_just_free" is taken. Fix this by moving the freeing of the maple tree nodes to a shared location for all error paths.

In the Linux kernel, the following vulnerability has been resolved: media: tegra-video: Fix memory leak in __tegra_channel_try_format() The state object allocated by __v4l2_subdev_state_alloc() must be freed with __v4l2_subdev_state_free() when it is no longer needed. In __tegra_channel_try_format(), two error paths return directly after v4l2_subdev_call() fails, without freeing the allocated 'sd_state' object. This violates the requirement and causes a memory leak. Fix this by introducing a cleanup label and using goto statements in the error paths to ensure that __v4l2_subdev_state_free() is always called before the function returns.

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: restore failed global reservations to subpool Commit a833a693a490 ("mm: hugetlb: fix incorrect fallback for subpool") fixed an underflow error for hstate->resv_huge_pages caused by incorrectly attributing globally requested pages to the subpool's reservation. Unfortunately, this fix also introduced the opposite problem, which would leave spool->used_hpages elevated if the globally requested pages could not be acquired. This is because while a subpool's reserve pages only accounts for what is requested and allocated from the subpool, its "used" counter keeps track of what is consumed in total, both from the subpool and globally. Thus, we need to adjust spool->used_hpages in the other direction, and make sure that globally requested pages are uncharged from the subpool's used counter. Each failed allocation attempt increments the used_hpages counter by how many pages were requested from the global pool. Ultimately, this renders the subpool unusable, as used_hpages approaches the max limit. The issue can be reproduced as follows: 1. Allocate 4 hugetlb pages 2. Create a hugetlb mount with max=4, min=2 3. Consume 2 pages globally 4. Request 3 pages from the subpool (2 from subpool + 1 from global) 4.1 hugepage_subpool_get_pages(spool, 3) succeeds. used_hpages += 3 4.2 hugetlb_acct_memory(h, 1) fails: no global pages left used_hpages -= 2 5. Subpool now has used_hpages = 1, despite not being able to successfully allocate any hugepages. It believes it can now only allocate 3 more hugepages, not 4. With each failed allocation attempt incrementing the used counter, the subpool eventually reaches a point where its used counter equals its max counter. At that point, any future allocations that try to allocate hugeTLB pages from the subpool will fail, despite the subpool not having any of its hugeTLB pages consumed by any user. Once this happens, there is no way to make the subpool usable again, since there is no way to decrement the used counter as no process is really consuming the hugeTLB pages. The underflow issue that the original commit fixes still remains fixed as well. Without this fix, used_hpages would keep on leaking if hugetlb_acct_memory() fails.

In the Linux kernel, the following vulnerability has been resolved: udp: Fix memory accounting leak. Matt Dowling reported a weird UDP memory usage issue. Under normal operation, the UDP memory usage reported in /proc/net/sockstat remains close to zero. However, it occasionally spiked to 524,288 pages and never dropped. Moreover, the value doubled when the application was terminated. Finally, it caused intermittent packet drops. We can reproduce the issue with the script below [0]: 1. /proc/net/sockstat reports 0 pages # cat /proc/net/sockstat | grep UDP: UDP: inuse 1 mem 0 2. Run the script till the report reaches 524,288 # python3 test.py & sleep 5 # cat /proc/net/sockstat | grep UDP: UDP: inuse 3 mem 524288 <-- (INT_MAX + 1) >> PAGE_SHIFT 3. Kill the socket and confirm the number never drops # pkill python3 && sleep 5 # cat /proc/net/sockstat | grep UDP: UDP: inuse 1 mem 524288 4. (necessary since v6.0) Trigger proto_memory_pcpu_drain() # python3 test.py & sleep 1 && pkill python3 5. The number doubles # cat /proc/net/sockstat | grep UDP: UDP: inuse 1 mem 1048577 The application set INT_MAX to SO_RCVBUF, which triggered an integer overflow in udp_rmem_release(). When a socket is close()d, udp_destruct_common() purges its receive queue and sums up skb->truesize in the queue. This total is calculated and stored in a local unsigned integer variable. The total size is then passed to udp_rmem_release() to adjust memory accounting. However, because the function takes a signed integer argument, the total size can wrap around, causing an overflow. Then, the released amount is calculated as follows: 1) Add size to sk->sk_forward_alloc. 2) Round down sk->sk_forward_alloc to the nearest lower multiple of PAGE_SIZE and assign it to amount. 3) Subtract amount from sk->sk_forward_alloc. 4) Pass amount >> PAGE_SHIFT to __sk_mem_reduce_allocated(). When the issue occurred, the total in udp_destruct_common() was 2147484480 (INT_MAX + 833), which was cast to -2147482816 in udp_rmem_release(). At 1) sk->sk_forward_alloc is changed from 3264 to -2147479552, and 2) sets -2147479552 to amount. 3) reverts the wraparound, so we don't see a warning in inet_sock_destruct(). However, udp_memory_allocated ends up doubling at 4). Since commit 3cd3399dd7a8 ("net: implement per-cpu reserves for memory_allocated"), memory usage no longer doubles immediately after a socket is close()d because __sk_mem_reduce_allocated() caches the amount in udp_memory_per_cpu_fw_alloc. However, the next time a UDP socket receives a packet, the subtraction takes effect, causing UDP memory usage to double. This issue makes further memory allocation fail once the socket's sk->sk_rmem_alloc exceeds net.ipv4.udp_rmem_min, resulting in packet drops. To prevent this issue, let's use unsigned int for the calculation and call sk_forward_alloc_add() only once for the small delta. Note that first_packet_length() also potentially has the same problem. [0]: from socket import * SO_RCVBUFFORCE = 33 INT_MAX = (2 ** 31) - 1 s = socket(AF_INET, SOCK_DGRAM) s.bind(('', 0)) s.setsockopt(SOL_SOCKET, SO_RCVBUFFORCE, INT_MAX) c = socket(AF_INET, SOCK_DGRAM) c.connect(s.getsockname()) data = b'a' * 100 while True: c.send(data)

In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix memory leak in netlbl_cipsov4_add_std Reported by syzkaller: BUG: memory leak unreferenced object 0xffff888105df7000 (size 64): comm "syz-executor842", pid 360, jiffies 4294824824 (age 22.546s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000e67ed558>] kmalloc include/linux/slab.h:590 [inline] [<00000000e67ed558>] kzalloc include/linux/slab.h:720 [inline] [<00000000e67ed558>] netlbl_cipsov4_add_std net/netlabel/netlabel_cipso_v4.c:145 [inline] [<00000000e67ed558>] netlbl_cipsov4_add+0x390/0x2340 net/netlabel/netlabel_cipso_v4.c:416 [<0000000006040154>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 net/netlink/genetlink.c:739 [<00000000204d7a1c>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] [<00000000204d7a1c>] genl_rcv_msg+0x2bf/0x4f0 net/netlink/genetlink.c:800 [<00000000c0d6a995>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000d78b9d2c>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 [<000000009733081b>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<000000009733081b>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000d5fd43b8>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929 [<000000000a2d1e40>] sock_sendmsg_nosec net/socket.c:654 [inline] [<000000000a2d1e40>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000321d1969>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000964e16bc>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 [<000000001615e288>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433 [<000000004ee8b6a5>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47 [<00000000171c7cee>] entry_SYSCALL_64_after_hwframe+0x44/0xae The memory of doi_def->map.std pointing is allocated in netlbl_cipsov4_add_std, but no place has freed it. It should be freed in cipso_v4_doi_free which frees the cipso DOI resource.

In the Linux kernel, the following vulnerability has been resolved: net/tcp: Fix socket memory leak in TCP-AO failure handling for IPv6 When tcp_ao_copy_all_matching() fails in tcp_v6_syn_recv_sock() it just exits the function. This ends up causing a memory-leak: unreferenced object 0xffff0000281a8200 (size 2496): comm "softirq", pid 0, jiffies 4295174684 hex dump (first 32 bytes): 7f 00 00 06 7f 00 00 06 00 00 00 00 cb a8 88 13 ................ 0a 00 03 61 00 00 00 00 00 00 00 00 00 00 00 00 ...a............ backtrace (crc 5ebdbe15): kmemleak_alloc+0x44/0xe0 kmem_cache_alloc_noprof+0x248/0x470 sk_prot_alloc+0x48/0x120 sk_clone_lock+0x38/0x3b0 inet_csk_clone_lock+0x34/0x150 tcp_create_openreq_child+0x3c/0x4a8 tcp_v6_syn_recv_sock+0x1c0/0x620 tcp_check_req+0x588/0x790 tcp_v6_rcv+0x5d0/0xc18 ip6_protocol_deliver_rcu+0x2d8/0x4c0 ip6_input_finish+0x74/0x148 ip6_input+0x50/0x118 ip6_sublist_rcv+0x2fc/0x3b0 ipv6_list_rcv+0x114/0x170 __netif_receive_skb_list_core+0x16c/0x200 netif_receive_skb_list_internal+0x1f0/0x2d0 This is because in tcp_v6_syn_recv_sock (and the IPv4 counterpart), when exiting upon error, inet_csk_prepare_forced_close() and tcp_done() need to be called. They make sure the newsk will end up being correctly free'd. tcp_v4_syn_recv_sock() makes this very clear by having the put_and_exit label that takes care of things. So, this patch here makes sure tcp_v4_syn_recv_sock and tcp_v6_syn_recv_sock have similar error-handling and thus fixes the leak for TCP-AO.

In the Linux kernel, the following vulnerability has been resolved: x86/mce: use is_copy_from_user() to determine copy-from-user context Patch series "mm/hwpoison: Fix regressions in memory failure handling", v4. ## 1. What am I trying to do: This patchset resolves two critical regressions related to memory failure handling that have appeared in the upstream kernel since version 5.17, as compared to 5.10 LTS. - copyin case: poison found in user page while kernel copying from user space - instr case: poison found while instruction fetching in user space ## 2. What is the expected outcome and why - For copyin case: Kernel can recover from poison found where kernel is doing get_user() or copy_from_user() if those places get an error return and the kernel return -EFAULT to the process instead of crashing. More specifily, MCE handler checks the fixup handler type to decide whether an in kernel #MC can be recovered. When EX_TYPE_UACCESS is found, the PC jumps to recovery code specified in _ASM_EXTABLE_FAULT() and return a -EFAULT to user space. - For instr case: If a poison found while instruction fetching in user space, full recovery is possible. User process takes #PF, Linux allocates a new page and fills by reading from storage. ## 3. What actually happens and why - For copyin case: kernel panic since v5.17 Commit 4c132d1d844a ("x86/futex: Remove .fixup usage") introduced a new extable fixup type, EX_TYPE_EFAULT_REG, and later patches updated the extable fixup type for copy-from-user operations, changing it from EX_TYPE_UACCESS to EX_TYPE_EFAULT_REG. It breaks previous EX_TYPE_UACCESS handling when posion found in get_user() or copy_from_user(). - For instr case: user process is killed by a SIGBUS signal due to #CMCI and #MCE race When an uncorrected memory error is consumed there is a race between the CMCI from the memory controller reporting an uncorrected error with a UCNA signature, and the core reporting and SRAR signature machine check when the data is about to be consumed. ### Background: why *UN*corrected errors tied to *C*MCI in Intel platform [1] Prior to Icelake memory controllers reported patrol scrub events that detected a previously unseen uncorrected error in memory by signaling a broadcast machine check with an SRAO (Software Recoverable Action Optional) signature in the machine check bank. This was overkill because it's not an urgent problem that no core is on the verge of consuming that bad data. It's also found that multi SRAO UCE may cause nested MCE interrupts and finally become an IERR. Hence, Intel downgrades the machine check bank signature of patrol scrub from SRAO to UCNA (Uncorrected, No Action required), and signal changed to #CMCI. Just to add to the confusion, Linux does take an action (in uc_decode_notifier()) to try to offline the page despite the UC*NA* signature name. ### Background: why #CMCI and #MCE race when poison is consuming in Intel platform [1] Having decided that CMCI/UCNA is the best action for patrol scrub errors, the memory controller uses it for reads too. But the memory controller is executing asynchronously from the core, and can't tell the difference between a "real" read and a speculative read. So it will do CMCI/UCNA if an error is found in any read. Thus: 1) Core is clever and thinks address A is needed soon, issues a speculative read. 2) Core finds it is going to use address A soon after sending the read request 3) The CMCI from the memory controller is in a race with MCE from the core that will soon try to retire the load from address A. Quite often (because speculation has got better) the CMCI from the memory controller is delivered before the core is committed to the instruction reading address A, so the interrupt is taken, and Linux offlines the page (marking it as poison). ## Why user process is killed for instr case Commit 046545a661af ("mm/hwpoison: fix error page recovered but reported "not ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid soft lockup in __kmemleak_do_cleanup() A soft lockup warning was observed on a relative small system x86-64 system with 16 GB of memory when running a debug kernel with kmemleak enabled. watchdog: BUG: soft lockup - CPU#8 stuck for 33s! [kworker/8:1:134] The test system was running a workload with hot unplug happening in parallel. Then kemleak decided to disable itself due to its inability to allocate more kmemleak objects. The debug kernel has its CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE set to 40,000. The soft lockup happened in kmemleak_do_cleanup() when the existing kmemleak objects were being removed and deleted one-by-one in a loop via a workqueue. In this particular case, there are at least 40,000 objects that need to be processed and given the slowness of a debug kernel and the fact that a raw_spinlock has to be acquired and released in __delete_object(), it could take a while to properly handle all these objects. As kmemleak has been disabled in this case, the object removal and deletion process can be further optimized as locking isn't really needed. However, it is probably not worth the effort to optimize for such an edge case that should rarely happen. So the simple solution is to call cond_resched() at periodic interval in the iteration loop to avoid soft lockup.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path During tests of another unrelated patch I was able to trigger this error: Objects remaining on __kmem_cache_shutdown()

In the Linux kernel, the following vulnerability has been resolved: misc: tifm: fix possible memory leak in tifm_7xx1_switch_media() If device_register() returns error in tifm_7xx1_switch_media(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized.

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix potential memory leak in rtw_init_drv_sw() In rtw_init_drv_sw(), there are various init functions are called to populate the padapter structure and some checks for their return value. However, except for the first one error path, the other five error paths do not properly release the previous allocated resources, which leads to various memory leaks. This patch fixes them and keeps the success and error separate. Note that these changes keep the form of `rtw_init_drv_sw()` in "drivers/staging/r8188eu/os_dep/os_intfs.c". As there is no proper device to test with, no runtime testing was performed.

In the Linux kernel, the following vulnerability has been resolved: vfio/mlx5: Fix an unwind issue in mlx5vf_add_migration_pages() Fix an unwind issue in mlx5vf_add_migration_pages(). If a set of pages is allocated but fails to be added to the SG table, they need to be freed to prevent a memory leak. Any pages successfully added to the SG table will be freed as part of mlx5vf_free_data_buffer().

In the Linux kernel, the following vulnerability has been resolved: net: fix memory leak in tcp_conn_request() If inet_csk_reqsk_queue_hash_add() return false, tcp_conn_request() will return without free the dst memory, which allocated in af_ops->route_req. Here is the kmemleak stack: unreferenced object 0xffff8881198631c0 (size 240): comm "softirq", pid 0, jiffies 4299266571 (age 1802.392s) hex dump (first 32 bytes): 00 10 9b 03 81 88 ff ff 80 98 da bc ff ff ff ff ................ 81 55 18 bb ff ff ff ff 00 00 00 00 00 00 00 00 .U.............. backtrace: [<ffffffffb93e8d4c>] kmem_cache_alloc+0x60c/0xa80 [<ffffffffba11b4c5>] dst_alloc+0x55/0x250 [<ffffffffba227bf6>] rt_dst_alloc+0x46/0x1d0 [<ffffffffba23050a>] __mkroute_output+0x29a/0xa50 [<ffffffffba23456b>] ip_route_output_key_hash+0x10b/0x240 [<ffffffffba2346bd>] ip_route_output_flow+0x1d/0x90 [<ffffffffba254855>] inet_csk_route_req+0x2c5/0x500 [<ffffffffba26b331>] tcp_conn_request+0x691/0x12c0 [<ffffffffba27bd08>] tcp_rcv_state_process+0x3c8/0x11b0 [<ffffffffba2965c6>] tcp_v4_do_rcv+0x156/0x3b0 [<ffffffffba299c98>] tcp_v4_rcv+0x1cf8/0x1d80 [<ffffffffba239656>] ip_protocol_deliver_rcu+0xf6/0x360 [<ffffffffba2399a6>] ip_local_deliver_finish+0xe6/0x1e0 [<ffffffffba239b8e>] ip_local_deliver+0xee/0x360 [<ffffffffba239ead>] ip_rcv+0xad/0x2f0 [<ffffffffba110943>] __netif_receive_skb_one_core+0x123/0x140 Call dst_release() to free the dst memory when inet_csk_reqsk_queue_hash_add() return false in tcp_conn_request().

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: fix new damon_target objects leaks on damon_commit_targets() Patch series "mm/damon/core: fix memory leaks and ignored inputs from damon_commit_ctx()". Due to two bugs in damon_commit_targets() and damon_commit_schemes(), which are called from damon_commit_ctx(), some user inputs can be ignored, and some mmeory objects can be leaked. Fix those. Note that only DAMON sysfs interface users are affected. Other DAMON core API user modules that more focused more on simple and dedicated production usages, including DAMON_RECLAIM and DAMON_LRU_SORT are not using the buggy function in the way, so not affected. This patch (of 2): When new DAMON targets are added via damon_commit_targets(), the newly created targets are not deallocated when updating the internal data (damon_commit_target()) is failed. Worse yet, even if the setup is successfully done, the new target is not linked to the context. Hence, the new targets are always leaked regardless of the internal data setup failure. Fix the leaks.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove() This will ensure that the scsi host is cleaned up properly using scsi_host_dev_release(). Otherwise, it may lead to memory leaks.

In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leak in ceph_direct_read_write() The bvecs array which is allocated in iter_get_bvecs_alloc() is leaked and pages remain pinned if ceph_alloc_sparse_ext_map() fails. There is no need to delay the allocation of sparse_ext map until after the bvecs array is set up, so fix this by moving sparse_ext allocation a bit earlier. Also, make a similar adjustment in __ceph_sync_read() for consistency (a leak of the same kind in __ceph_sync_read() has been addressed differently).

In the Linux kernel, the following vulnerability has been resolved: scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb() Hook "qedi_ops->common->sb_init = qed_sb_init" does not release the DMA memory sb_virt when it fails. Add dma_free_coherent() to free it. This is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb().

A memory leak flaw was found in the Linux kernel's Stream Control Transmission Protocol. This issue may occur when a user starts a malicious networking service and someone connects to this service. This could allow a local user to starve resources, causing a denial of service.

In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb() Hook "qed_ops->common->sb_init = qed_sb_init" does not release the DMA memory sb_virt when it fails. Add dma_free_coherent() to free it. This is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb().

In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix skb_put() panic on non-linear skb during reassembly In iptfs_reassem_cont(), IP-TFS attempts to append data to the new inner packet 'newskb' that is being reassembled. First a zero-copy approach is tried if it succeeds then newskb becomes non-linear. When a subsequent fragment in the same datagram does not meet the fast-path conditions, a memory copy is performed. It calls skb_put() to append the data and as newskb is non-linear it triggers SKB_LINEAR_ASSERT check. Oops: invalid opcode: 0000 [#1] SMP NOPTI [...] RIP: 0010:skb_put+0x3c/0x40 [...] Call Trace: <IRQ> iptfs_reassem_cont+0x1ab/0x5e0 [xfrm_iptfs] iptfs_input_ordered+0x2af/0x380 [xfrm_iptfs] iptfs_input+0x122/0x3e0 [xfrm_iptfs] xfrm_input+0x91e/0x1a50 xfrm4_esp_rcv+0x3a/0x110 ip_protocol_deliver_rcu+0x1d7/0x1f0 ip_local_deliver_finish+0xbe/0x1e0 __netif_receive_skb_core.constprop.0+0xb56/0x1120 __netif_receive_skb_list_core+0x133/0x2b0 netif_receive_skb_list_internal+0x1ff/0x3f0 napi_complete_done+0x81/0x220 virtnet_poll+0x9d6/0x116e [virtio_net] __napi_poll.constprop.0+0x2b/0x270 net_rx_action+0x162/0x360 handle_softirqs+0xdc/0x510 __irq_exit_rcu+0xe7/0x110 irq_exit_rcu+0xe/0x20 common_interrupt+0x85/0xa0 </IRQ> <TASK> Fix this by checking if the skb is non-linear. If it is, linearize it by calling skb_linearize(). As the initial allocation of newskb originally reserved enough tailroom for the entire reassembled packet we do not need to check if we have enough tailroom or extend it.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix qi_batch NULL pointer with nested parent domain The qi_batch is allocated when assigning cache tag for a domain. While for nested parent domain, it is missed. Hence, when trying to map pages to the nested parent, NULL dereference occurred. Also, there is potential memleak since there is no lock around domain->qi_batch allocation. To solve it, add a helper for qi_batch allocation, and call it in both the __cache_tag_assign_domain() and __cache_tag_assign_parent_domain(). BUG: kernel NULL pointer dereference, address: 0000000000000200 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8104795067 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 223 UID: 0 PID: 4357 Comm: qemu-system-x86 Not tainted 6.13.0-rc1-00028-g4b50c3c3b998-dirty #2632 Call Trace: ? __die+0x24/0x70 ? page_fault_oops+0x80/0x150 ? do_user_addr_fault+0x63/0x7b0 ? exc_page_fault+0x7c/0x220 ? asm_exc_page_fault+0x26/0x30 ? cache_tag_flush_range_np+0x13c/0x260 intel_iommu_iotlb_sync_map+0x1a/0x30 iommu_map+0x61/0xf0 batch_to_domain+0x188/0x250 iopt_area_fill_domains+0x125/0x320 ? rcu_is_watching+0x11/0x50 iopt_map_pages+0x63/0x100 iopt_map_common.isra.0+0xa7/0x190 iopt_map_user_pages+0x6a/0x80 iommufd_ioas_map+0xcd/0x1d0 iommufd_fops_ioctl+0x118/0x1c0 __x64_sys_ioctl+0x93/0xc0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: ionic: Fix netdev notifier unregister on failure If register_netdev() fails, then the driver leaks the netdev notifier. Fix this by calling ionic_lif_unregister() on register_netdev() failure. This will also call ionic_lif_unregister_phc() if it has already been registered.

In the Linux kernel, the following vulnerability has been resolved: udmabuf: fix memory leak on last export_udmabuf() error path In export_udmabuf(), if dma_buf_fd() fails because the FD table is full, a dma_buf owning the udmabuf has already been created; but the error handling in udmabuf_create() will tear down the udmabuf without doing anything about the containing dma_buf. This leaves a dma_buf in memory that contains a dangling pointer; though that doesn't seem to lead to anything bad except a memory leak. Fix it by moving the dma_buf_fd() call out of export_udmabuf() so that we can give it different error handling. Note that the shape of this code changed a lot in commit 5e72b2b41a21 ("udmabuf: convert udmabuf driver to use folios"); but the memory leak seems to have existed since the introduction of udmabuf.

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix reset_method_store() memory leak In reset_method_store(), a string is allocated via kstrndup() and assigned to the local "options". options is then used in with strsep() to find spaces: while ((name = strsep(&options, " ")) != NULL) { If there are no remaining spaces, then options is set to NULL by strsep(), so the subsequent kfree(options) doesn't free the memory allocated via kstrndup(). Fix by using a separate tmp_options to iterate with strsep() so options is preserved.