A post-auth SQL injection vulnerability in WebAdmin of Sophos Firewall versions older than 21.0 MR1 (21.0.1) can potentially lead to administrators achieving arbitrary code execution.
A post-auth code injection vulnerability allows admins to execute code in Webadmin of Sophos Firewall releases older than version 19.5 GA.
An OS command injection vulnerability allows admins to execute code via SSL VPN configuration uploads in Sophos Firewall releases older than version 19.5 GA.
Multiple SQLi vulnerabilities in Webadmin allow for privilege escalation from admin to super-admin in Sophos Firewall older than version 18.5 MR4 and version 19.0 MR1.
A pre-auth command injection vulnerability in the warn-proceed handler of Sophos Web Appliance older than version 4.3.10.4 allows execution of arbitrary code.
The Sophos Web Appliance (version 4.2.1.3) is vulnerable to two Remote Command Injection vulnerabilities affecting its web administrative interface. These vulnerabilities occur in the MgrReport.php (/controllers/MgrReport.php) component responsible for blocking and unblocking IP addresses from accessing the device. The device doesn't properly escape the information passed in the variables 'unblockip' and 'blockip' before calling the shell_exec() function which allows for system commands to be injected into the device. The code erroneously suggests that the information handled is protected by utilizing the variable name 'escapedips' - however this was not the case. The Sophos ID is NSWA-1258.
The Sophos Web Appliance Remote / Secure Web Gateway server (version 4.2.1.3) is vulnerable to a Remote Command Injection vulnerability in its web administrative interface. These vulnerabilities occur in MgrDiagnosticTools.php (/controllers/MgrDiagnosticTools.php), in the component responsible for performing diagnostic tests with the UNIX wget utility. The application doesn't properly escape the information passed in the 'url' variable before calling the executeCommand class function ($this->dtObj->executeCommand). This function calls exec() with unsanitized user input allowing for remote command injection. The page that contains the vulnerabilities, /controllers/MgrDiagnosticTools.php, is accessed by a built-in command answered by the administrative interface. The command that calls to that vulnerable page (passed in the 'section' parameter) is: 'configuration'. Exploitation of this vulnerability yields shell access to the remote machine under the 'spiderman' user account.
In Sophos Web Appliance (SWA) before 4.3.1.2, a section of the machine's interface responsible for generating reports was vulnerable to remote command injection via the token parameter, aka NSWA-1303.
In Sophos Web Appliance (SWA) before 4.3.1.2, a section of the machine's configuration utilities for adding (and detecting) Active Directory servers was vulnerable to remote command injection, aka NSWA-1314.
A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution.
The webserver in Delta DX-3021 versions prior to 1.24 is vulnerable to command injection through the network diagnosis page. This vulnerability could allow a remote unauthenticated user to add files, delete files, and change file permissions.
A weakness has been identified in D-Link DNS-320 2.06B01. This impacts the function cgi_set_host/cgi_set_ntp/cgi_fan_control/cgi_merge_user of the file /cgi-bin/system_mgr.cgi. This manipulation causes os command injection. It is possible to initiate the attack remotely.
A security flaw has been discovered in D-Link DNS-320 2.06B01. This affects the function delete/rename/copy/move/chmod/chown of the file /cgi-bin/webfile_mgr.cgi. The manipulation results in os command injection. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks.
An administrative user with access to configure webhooks can execute arbitrary commands by configuring and then triggering webhooks containing specific FreeMarker template syntax. This issue affects all MongoDB Ops Manager 7.0 versions and MongoDB Ops Manager versions 8.0.22 and prior.
A vulnerability in the WebUI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system.
A security vulnerability has been detected in Tenda AC6 15.03.06.23. Affected by this issue is the function get_log_file of the file /goform/getLogFile of the component httpd. The manipulation of the argument wans.flag leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used.
Several potential command injections vulnerabilities exist in the AT command interface of ALEOS before 4.11.0, and 4.9.4.
A vulnerability in Pulse Connect Secure before 9.1R12 could allow an authenticated administrator to perform command injection via an unsanitized web parameter.
A vulnerability has been found in Tenda AC6 2.0/15.03.06.23. The affected element is an unknown function of the file /goform/telnet of the component httpd. The manipulation of the argument lan.ip leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.
A vulnerability was identified in Linksys MR9600 2.0.6.206937. This affects the function BTRequestGetSmartConnectStatus of the file /etc/init.d/run_central2.sh of the component JNAP Action Handler. The manipulation of the argument pin leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
A weakness has been identified in EFM ipTIME C200 up to 1.092. This vulnerability affects the function sub_408F90 of the file /cgi/iux_set.cgi of the component ApplyRestore Endpoint. This manipulation of the argument RestoreFile causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
Command injection vulnerability in nw_interface.html in SHARP multifunction printers (MFPs)'s Digital Full-color Multifunctional System 202 or earlier, 120 or earlier, 600 or earlier, 121 or earlier, 500 or earlier, 402 or earlier, 790 or earlier, and Digital Multifunctional System (Monochrome) 200 or earlier, 211 or earlier, 102 or earlier, 453 or earlier, 400 or earlier, 202 or earlier, 602 or earlier, 500 or earlier, 401 or earlier allows remote attackers to execute arbitrary commands via unspecified vectors.
A vulnerability was found in D-Link DIR-882 1.01B02. Impacted is the function sprintf of the file prog.cgi of the component HNAP1 SetNetworkSettings Handler. The manipulation of the argument IPAddress results in os command injection. The attack may be performed from remote. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.
Command injection in the admin web console of Ivanti CSA before version 5.0.3 allows a remote authenticated attacker with admin privileges to achieve remote code execution.
A vulnerability, which was classified as critical, has been found in EnGenius ENH1350EXT, ENS500-AC and ENS620EXT up to 20241118. This issue affects some unknown processing of the file /admin/network/diag_ping6. The manipulation of the argument diag_ping6 leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability, which was classified as critical, has been found in D-Link DIR-823X 240126/240802. This issue affects the function sub_41710C of the file /goform/diag_nslookup of the component HTTP POST Request Handler. The manipulation of the argument target_addr leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in EnGenius ENH1350EXT, ENS500-AC and ENS620EXT up to 20241118 and classified as critical. Affected by this issue is some unknown functionality of the file /admin/network/diag_iperf. The manipulation of the argument iperf leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in Wavlink WL-WN530H4 20220721. This vulnerability affects the function strcat/snprintf of the file /cgi-bin/internet.cgi. The manipulation results in os command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. Upgrading to version 2026.04.16 is able to resolve this issue. Upgrading the affected component is recommended.
A vulnerability was identified in D-Link DNS-320 2.06B01. The impacted element is the function cgi_speed/cgi_dhcpd_lease/cgi_ddns/cgi_set_ip/cgi_upnp_del/cgi_dhcpd/cgi_upnp_add/cgi_upnp_edit of the file /cgi-bin/network_mgr.cgi. The manipulation leads to os command injection. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.
Command injection in Ivanti Connect Secure before version 22.7R2.3 and Ivanti Policy Secure before version 22.7R1.2 allows a remote authenticated attacker with admin privileges to achieve remote code execution. (Not applicable to 9.1Rx)
Command Injection vulnerability in NEC Corporation UNIVERGE IX from Ver9.2 to Ver10.10.21, for Ver10.8 up to Ver10.8.27, for Ver10.9 up to Ver10.9.14 and UNIVERGE IX-R/IX-V Ver1.2.15 and earlier allows a attacker to inject an arbitrary CLI commands to be executed on the device via the management interface.
A vulnerability was found in WAVLINK WN530H4, WN530HG4 and WN572HG3 up to 20221028. It has been rated as critical. This issue affects the function set_ipv6 of the file firewall.cgi. The manipulation of the argument dhcpGateway leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability classified as critical has been found in WAVLINK WN530H4, WN530HG4 and WN572HG3 up to 20221028. Affected is the function set_ipv6 of the file internet.cgi. The manipulation of the argument IPv6OpMode/IPv6IPAddr/IPv6WANIPAddr/IPv6GWAddr leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in TRENDnet TEW-815DAP 1.0.2.0. It has been classified as critical. This affects the function do_setNTP of the component POST Request Handler. The manipulation of the argument NtpDstStart/NtpDstEnd leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252123. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in TRENDnet TEW-822DRE 1.03B02. It has been declared as critical. This vulnerability affects unknown code of the file /admin_ping.htm of the component POST Request Handler. The manipulation of the argument ipv4_ping/ipv6_ping leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-252124. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A security vulnerability has been detected in Tenda G103 1.0.0.5. The affected element is the function action_set_system_settings of the file system.lua of the component Setting Handler. Such manipulation of the argument lanIp leads to command injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used.
The Wi-Fi device blocking feature fails to sanitize MAC address input, allowing injection and execution of arbitrary shell commands.
An authenticated command injection vulnerability exists in the Archer BE450 v1 and BE7200 v1 router that allows an administrator to execute arbitrary system commands through the web management interface. After successfully authenticating to the admin interface, an attacker can leverage the browser’s developer console by supplying a crafted input that is passed to backend system commands without adequate sanitization. Successful exploitation enables execution of arbitrary commands with elevated privileges on the device, which may allow the attacker to start unauthorized services, modify system configuration, or otherwise fully compromise the router’s operating environment.
A vulnerability in the web-based management interface of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker with read-write privileges on the application to perform a command injection attack that could result in remote code execution on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to establish a remote shell with root privileges.
A command injection vulnerability exists in the IOCTL that manages OTA updates. A specially crafted command can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability.
Zoho ManageEngine ADManager Plus through 7151 allows authenticated admin users to execute the commands in proxy settings.
AP Manager in Innovaphone before 13r2 Service Release 17 allows command injection via a modified service ID during app upload.
A flaw has been found in TOTOLINK X6000R 9.4.0cu.1360_B20241207/9.4.0cu.1498_B20250826. Affected by this issue is the function setLanCfg of the file /usr/sbin/shttpd. Executing a manipulation of the argument Hostname can lead to os command injection. The attack may be launched remotely.
A vulnerability was found in D-Link DIR-825 and DIR-825R 1.0.5/4.5.1. Affected is the function handler_update_system_time of the file libdeuteron_modules.so of the component NTP Service. The manipulation results in os command injection. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.
Command injection vulnerabilities exist in the web-based management interface of AOS-8 and AOS-10 Operating Systems. Successful exploitation could allow an authenticated remote attacker to upload arbitrary files to the underlying operating system, potentially leading to remote code execution as a privileged user.
Command injection vulnerabilities exist in the web-based management interface of AOS-8 and AOS-10 Operating Systems. Successful exploitation of these vulnerabilities could allow an authenticated remote attacker to execute arbitrary commands on the underlying operating system.
In versions 16.1.x before 16.1.3.1, 15.1.x before 15.1.6.1, 14.1.x before 14.1.5.1, and 13.1.x before 13.1.5.1, When the Advanced WAF / ASM module is provisioned, an authenticated remote code execution vulnerability exists in the BIG-IP iControl REST interface.
A command injection vulnerability exists in the web-based management interface of AOS-8 and AOS-10 Operating Systems. Successful exploitation could allow an authenticated remote attacker to place arbitrary files on the underlying filesystem of the affected device.
Command injection vulnerabilities exist in the web-based management interface of AOS-8 and AOS-10 Operating Systems. Successful exploitation of these vulnerabilities could allow an authenticated remote attacker to execute arbitrary commands on the underlying operating system.
Command injection vulnerabilities exist in the web-based management interface of AOS-8 and AOS-10 Operating Systems. Successful exploitation of these vulnerabilities could allow an authenticated remote attacker to execute arbitrary commands on the underlying operating system.