In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Prevent UAF in proc_cpuset_show() An UAF can happen when /proc/cpuset is read as reported in [1]. This can be reproduced by the following methods: 1.add an mdelay(1000) before acquiring the cgroup_lock In the cgroup_path_ns function. 2.$cat /proc/<pid>/cpuset repeatly. 3.$mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset/ $umount /sys/fs/cgroup/cpuset/ repeatly. The race that cause this bug can be shown as below: (umount) | (cat /proc/<pid>/cpuset) css_release | proc_cpuset_show css_release_work_fn | css = task_get_css(tsk, cpuset_cgrp_id); css_free_rwork_fn | cgroup_path_ns(css->cgroup, ...); cgroup_destroy_root | mutex_lock(&cgroup_mutex); rebind_subsystems | cgroup_free_root | | // cgrp was freed, UAF | cgroup_path_ns_locked(cgrp,..); When the cpuset is initialized, the root node top_cpuset.css.cgrp will point to &cgrp_dfl_root.cgrp. In cgroup v1, the mount operation will allocate cgroup_root, and top_cpuset.css.cgrp will point to the allocated &cgroup_root.cgrp. When the umount operation is executed, top_cpuset.css.cgrp will be rebound to &cgrp_dfl_root.cgrp. The problem is that when rebinding to cgrp_dfl_root, there are cases where the cgroup_root allocated by setting up the root for cgroup v1 is cached. This could lead to a Use-After-Free (UAF) if it is subsequently freed. The descendant cgroups of cgroup v1 can only be freed after the css is released. However, the css of the root will never be released, yet the cgroup_root should be freed when it is unmounted. This means that obtaining a reference to the css of the root does not guarantee that css.cgrp->root will not be freed. Fix this problem by using rcu_read_lock in proc_cpuset_show(). As cgroup_root is kfree_rcu after commit d23b5c577715 ("cgroup: Make operations on the cgroup root_list RCU safe"), css->cgroup won't be freed during the critical section. To call cgroup_path_ns_locked, css_set_lock is needed, so it is safe to replace task_get_css with task_css. [1] https://syzkaller.appspot.com/bug?extid=9b1ff7be974a403aa4cd

In the Linux kernel, the following vulnerability has been resolved: kcsan: Turn report_filterlist_lock into a raw_spinlock Ran Xiaokai reports that with a KCSAN-enabled PREEMPT_RT kernel, we can see splats like: | BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 | preempt_count: 10002, expected: 0 | RCU nest depth: 0, expected: 0 | no locks held by swapper/1/0. | irq event stamp: 156674 | hardirqs last enabled at (156673): [<ffffffff81130bd9>] do_idle+0x1f9/0x240 | hardirqs last disabled at (156674): [<ffffffff82254f84>] sysvec_apic_timer_interrupt+0x14/0xc0 | softirqs last enabled at (0): [<ffffffff81099f47>] copy_process+0xfc7/0x4b60 | softirqs last disabled at (0): [<0000000000000000>] 0x0 | Preemption disabled at: | [<ffffffff814a3e2a>] paint_ptr+0x2a/0x90 | CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.11.0+ #3 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 | Call Trace: | <IRQ> | dump_stack_lvl+0x7e/0xc0 | dump_stack+0x1d/0x30 | __might_resched+0x1a2/0x270 | rt_spin_lock+0x68/0x170 | kcsan_skip_report_debugfs+0x43/0xe0 | print_report+0xb5/0x590 | kcsan_report_known_origin+0x1b1/0x1d0 | kcsan_setup_watchpoint+0x348/0x650 | __tsan_unaligned_write1+0x16d/0x1d0 | hrtimer_interrupt+0x3d6/0x430 | __sysvec_apic_timer_interrupt+0xe8/0x3a0 | sysvec_apic_timer_interrupt+0x97/0xc0 | </IRQ> On a detected data race, KCSAN's reporting logic checks if it should filter the report. That list is protected by the report_filterlist_lock *non-raw* spinlock which may sleep on RT kernels. Since KCSAN may report data races in any context, convert it to a raw_spinlock. This requires being careful about when to allocate memory for the filter list itself which can be done via KCSAN's debugfs interface. Concurrent modification of the filter list via debugfs should be rare: the chosen strategy is to optimistically pre-allocate memory before the critical section and discard if unused.

In the Linux kernel, the following vulnerability has been resolved: tcp: add sanity tests to TCP_QUEUE_SEQ Qingyu Li reported a syzkaller bug where the repro changes RCV SEQ _after_ restoring data in the receive queue. mprotect(0x4aa000, 12288, PROT_READ) = 0 mmap(0x1ffff000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x1ffff000 mmap(0x20000000, 16777216, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x20000000 mmap(0x21000000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x21000000 socket(AF_INET6, SOCK_STREAM, IPPROTO_IP) = 3 setsockopt(3, SOL_TCP, TCP_REPAIR, [1], 4) = 0 connect(3, {sa_family=AF_INET6, sin6_port=htons(0), sin6_flowinfo=htonl(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_scope_id=0}, 28) = 0 setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [1], 4) = 0 sendmsg(3, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="0x0000000000000003\0\0", iov_len=20}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 setsockopt(3, SOL_TCP, TCP_REPAIR, [0], 4) = 0 setsockopt(3, SOL_TCP, TCP_QUEUE_SEQ, [128], 4) = 0 recvfrom(3, NULL, 20, 0, NULL, NULL) = -1 ECONNRESET (Connection reset by peer) syslog shows: [ 111.205099] TCP recvmsg seq # bug 2: copied 80, seq 0, rcvnxt 80, fl 0 [ 111.207894] WARNING: CPU: 1 PID: 356 at net/ipv4/tcp.c:2343 tcp_recvmsg_locked+0x90e/0x29a0 This should not be allowed. TCP_QUEUE_SEQ should only be used when queues are empty. This patch fixes this case, and the tx path as well.

In the Linux kernel, the following vulnerability has been resolved: s390/stacktrace: Use break instead of return statement arch_stack_walk_user_common() contains a return statement instead of a break statement in case store_ip() fails while trying to store a callchain entry of a user space process. This may lead to a missing pagefault_enable() call. If this happens any subsequent page fault of the process won't be resolved by the page fault handler and this in turn will lead to the process being killed. Use a break instead of a return statement to fix this.

In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: fix sleeping function called from invalid context at print message Address a bug in the kernel that triggers a "sleeping function called from invalid context" warning when /sys/kernel/debug/kmemleak is printed under specific conditions: - CONFIG_PREEMPT_RT=y - Set SELinux as the LSM for the system - Set kptr_restrict to 1 - kmemleak buffer contains at least one item BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 136, name: cat preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 6 locks held by cat/136: #0: ffff32e64bcbf950 (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0xb8/0xe30 #1: ffffafe6aaa9dea0 (scan_mutex){+.+.}-{3:3}, at: kmemleak_seq_start+0x34/0x128 #3: ffff32e6546b1cd0 (&object->lock){....}-{2:2}, at: kmemleak_seq_show+0x3c/0x1e0 #4: ffffafe6aa8d8560 (rcu_read_lock){....}-{1:2}, at: has_ns_capability_noaudit+0x8/0x1b0 #5: ffffafe6aabbc0f8 (notif_lock){+.+.}-{2:2}, at: avc_compute_av+0xc4/0x3d0 irq event stamp: 136660 hardirqs last enabled at (136659): [<ffffafe6a80fd7a0>] _raw_spin_unlock_irqrestore+0xa8/0xd8 hardirqs last disabled at (136660): [<ffffafe6a80fd85c>] _raw_spin_lock_irqsave+0x8c/0xb0 softirqs last enabled at (0): [<ffffafe6a5d50b28>] copy_process+0x11d8/0x3df8 softirqs last disabled at (0): [<0000000000000000>] 0x0 Preemption disabled at: [<ffffafe6a6598a4c>] kmemleak_seq_show+0x3c/0x1e0 CPU: 1 UID: 0 PID: 136 Comm: cat Tainted: G E 6.11.0-rt7+ #34 Tainted: [E]=UNSIGNED_MODULE Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0xa0/0x128 show_stack+0x1c/0x30 dump_stack_lvl+0xe8/0x198 dump_stack+0x18/0x20 rt_spin_lock+0x8c/0x1a8 avc_perm_nonode+0xa0/0x150 cred_has_capability.isra.0+0x118/0x218 selinux_capable+0x50/0x80 security_capable+0x7c/0xd0 has_ns_capability_noaudit+0x94/0x1b0 has_capability_noaudit+0x20/0x30 restricted_pointer+0x21c/0x4b0 pointer+0x298/0x760 vsnprintf+0x330/0xf70 seq_printf+0x178/0x218 print_unreferenced+0x1a4/0x2d0 kmemleak_seq_show+0xd0/0x1e0 seq_read_iter+0x354/0xe30 seq_read+0x250/0x378 full_proxy_read+0xd8/0x148 vfs_read+0x190/0x918 ksys_read+0xf0/0x1e0 __arm64_sys_read+0x70/0xa8 invoke_syscall.constprop.0+0xd4/0x1d8 el0_svc+0x50/0x158 el0t_64_sync+0x17c/0x180 %pS and %pK, in the same back trace line, are redundant, and %pS can void %pK service in certain contexts. %pS alone already provides the necessary information, and if it cannot resolve the symbol, it falls back to printing the raw address voiding the original intent behind the %pK. Additionally, %pK requires a privilege check CAP_SYSLOG enforced through the LSM, which can trigger a "sleeping function called from invalid context" warning under RT_PREEMPT kernels when the check occurs in an atomic context. This issue may also affect other LSMs. This change avoids the unnecessary privilege check and resolves the sleeping function warning without any loss of information.

In the Linux kernel, the following vulnerability has been resolved: gpio: virtuser: fix missing lookup table cleanups When a virtuser device is created via configfs and the probe fails due to an incorrect lookup table, the table is not removed. This prevents subsequent probe attempts from succeeding, even if the issue is corrected, unless the device is released. Additionally, cleanup is also needed in the less likely case of platform_device_register_full() failure. Besides, a consistent memory leak in lookup_table->dev_id was spotted using kmemleak by toggling the live state between 0 and 1 with a correct lookup table. Introduce gpio_virtuser_remove_lookup_table() as the counterpart to the existing gpio_virtuser_make_lookup_table() and call it from all necessary points to ensure proper cleanup.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix oops when unload drivers paralleling When unload hclge driver, it tries to disable sriov first for each ae_dev node from hnae3_ae_dev_list. If user unloads hns3 driver at the time, because it removes all the ae_dev nodes, and it may cause oops. But we can't simply use hnae3_common_lock for this. Because in the process flow of pci_disable_sriov(), it will trigger the remove flow of VF, which will also take hnae3_common_lock. To fixes it, introduce a new mutex to protect the unload process.

In the Linux kernel, the following vulnerability has been resolved: clk: hisilicon: hi3559a: Fix an erroneous devm_kfree() 'p_clk' is an array allocated just before the for loop for all clk that need to be registered. It is incremented at each loop iteration. If a clk_register() call fails, 'p_clk' may point to something different from what should be freed. The best we can do, is to avoid this wrong release of memory.

The Linux kernel before 2.6.37 does not properly implement a certain clock-update optimization, which allows local users to cause a denial of service (system hang) via an application that executes code in a loop.

In the Linux kernel, the following vulnerability has been resolved: efi: Don't map the entire mokvar table to determine its size Currently, when validating the mokvar table, we (re)map the entire table on each iteration of the loop, adding space as we discover new entries. If the table grows over a certain size, this fails due to limitations of early_memmap(), and we get a failure and traceback: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220 ... Call Trace: <TASK> ? __early_ioremap+0xef/0x220 ? __warn.cold+0x93/0xfa ? __early_ioremap+0xef/0x220 ? report_bug+0xff/0x140 ? early_fixup_exception+0x5d/0xb0 ? early_idt_handler_common+0x2f/0x3a ? __early_ioremap+0xef/0x220 ? efi_mokvar_table_init+0xce/0x1d0 ? setup_arch+0x864/0xc10 ? start_kernel+0x6b/0xa10 ? x86_64_start_reservations+0x24/0x30 ? x86_64_start_kernel+0xed/0xf0 ? common_startup_64+0x13e/0x141 </TASK> ---[ end trace 0000000000000000 ]--- mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187. Mapping the entire structure isn't actually necessary, as we don't ever need more than one entry header mapped at once. Changes efi_mokvar_table_init() to only map each entry header, not the entire table, when determining the table size. Since we're not mapping any data past the variable name, it also changes the code to enforce that each variable name is NUL terminated, rather than attempting to verify it in place.

In the Linux kernel, the following vulnerability has been resolved: block: fix rq-qos breakage from skipping rq_qos_done_bio() a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't tracked") made bio_endio() skip rq_qos_done_bio() if BIO_TRACKED is not set. While this fixed a potential oops, it also broke blk-iocost by skipping the done_bio callback for merged bios. Before, whether a bio goes through rq_qos_throttle() or rq_qos_merge(), rq_qos_done_bio() would be called on the bio on completion with BIO_TRACKED distinguishing the former from the latter. rq_qos_done_bio() is not called for bios which wenth through rq_qos_merge(). This royally confuses blk-iocost as the merged bios never finish and are considered perpetually in-flight. One reliably reproducible failure mode is an intermediate cgroup geting stuck active preventing its children from being activated due to the leaf-only rule, leading to loss of control. The following is from resctl-bench protection scenario which emulates isolating a web server like workload from a memory bomb run on an iocost configuration which should yield a reasonable level of protection. # cat /sys/block/nvme2n1/device/model Samsung SSD 970 PRO 512GB # cat /sys/fs/cgroup/io.cost.model 259:0 ctrl=user model=linear rbps=834913556 rseqiops=93622 rrandiops=102913 wbps=618985353 wseqiops=72325 wrandiops=71025 # cat /sys/fs/cgroup/io.cost.qos 259:0 enable=1 ctrl=user rpct=95.00 rlat=18776 wpct=95.00 wlat=8897 min=60.00 max=100.00 # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=242u:336u/2.5m p90=794u:1.4m/7.5m p99=2.7m:8.0m/62.5m max=8.0m:36.4m/350m W p50=221u:323u/1.5m p90=709u:1.2m/5.5m p99=1.5m:2.5m/9.5m max=6.9m:35.9m/350m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 15.90 15.90 15.90 40.05 57.24 59.07 60.01 74.63 74.63 90.35 90.35 58.12 15.82 lat-imp% 0 0 0 0 0 4.55 14.68 15.54 233.5 548.1 548.1 53.88 143.6 Result: isol=58.12:15.82% lat_imp=53.88%:143.6 work_csv=100.0% missing=3.96% The isolation result of 58.12% is close to what this device would show without any IO control. Fix it by introducing a new flag BIO_QOS_MERGED to mark merged bios and calling rq_qos_done_bio() on them too. For consistency and clarity, rename BIO_TRACKED to BIO_QOS_THROTTLED. The flag checks are moved into rq_qos_done_bio() so that it's next to the code paths that set the flags. With the patch applied, the above same benchmark shows: # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=123u:84.4u/985u p90=322u:256u/2.5m p99=1.6m:1.4m/9.5m max=11.1m:36.0m/350m W p50=429u:274u/995u p90=1.7m:1.3m/4.5m p99=3.4m:2.7m/11.5m max=7.9m:5.9m/26.5m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 84.91 84.91 89.51 90.73 92.31 94.49 96.36 98.04 98.71 100.0 100.0 94.42 2.81 lat-imp% 0 0 0 0 0 2.81 5.73 11.11 13.92 17.53 22.61 4.10 4.68 Result: isol=94.42:2.81% lat_imp=4.10%:4.68 work_csv=58.34% missing=0%

In the Linux kernel, the following vulnerability has been resolved: bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx As the introduction of the support for vsock and unix sockets in sockmap, tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK. vsock and af_unix sockets have vsock_sock and unix_sock instead of inet_connection_sock. For these sockets, tls_get_ctx may return an invalid pointer and cause page fault in function tls_sw_ctx_rx. BUG: unable to handle page fault for address: 0000000000040030 Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:sk_psock_strp_data_ready+0x23/0x60 Call Trace: ? __die+0x81/0xc3 ? no_context+0x194/0x350 ? do_page_fault+0x30/0x110 ? async_page_fault+0x3e/0x50 ? sk_psock_strp_data_ready+0x23/0x60 virtio_transport_recv_pkt+0x750/0x800 ? update_load_avg+0x7e/0x620 vsock_loopback_work+0xd0/0x100 process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? __kthread_cancel_work+0x40/0x40 ret_from_fork+0x1f/0x40 v2: - Add IS_ICSK check v3: - Update the commits in Fixes

In the Linux kernel, the following vulnerability has been resolved: net: altera: Fix refcount leak in altera_tse_mdio_create Every iteration of for_each_child_of_node() decrements the reference count of the previous node. When break from a for_each_child_of_node() loop, we need to explicitly call of_node_put() on the child node when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: io_uring: ensure task_work gets run as part of cancelations If we successfully cancel a work item but that work item needs to be processed through task_work, then we can be sleeping uninterruptibly in io_uring_cancel_generic() and never process it. Hence we don't make forward progress and we end up with an uninterruptible sleep warning. While in there, correct a comment that should be IFF, not IIF.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix crash in auto_retire The retire logic uses the 2 lower bits of the pointer to the retire function to store flags. However, the auto_retire function is not guaranteed to be aligned to a multiple of 4, which causes crashes as we jump to the wrong address, for example like this: 2021-04-24T18:03:53.804300Z WARNING kernel: [ 516.876901] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI 2021-04-24T18:03:53.804310Z WARNING kernel: [ 516.876906] CPU: 7 PID: 146 Comm: kworker/u16:6 Tainted: G U 5.4.105-13595-g3cd84167b2df #1 2021-04-24T18:03:53.804311Z WARNING kernel: [ 516.876907] Hardware name: Google Volteer2/Volteer2, BIOS Google_Volteer2.13672.76.0 02/22/2021 2021-04-24T18:03:53.804312Z WARNING kernel: [ 516.876911] Workqueue: events_unbound active_work 2021-04-24T18:03:53.804313Z WARNING kernel: [ 516.876914] RIP: 0010:auto_retire+0x1/0x20 2021-04-24T18:03:53.804314Z WARNING kernel: [ 516.876916] Code: e8 01 f2 ff ff eb 02 31 db 48 89 d8 5b 5d c3 0f 1f 44 00 00 55 48 89 e5 f0 ff 87 c8 00 00 00 0f 88 ab 47 4a 00 31 c0 5d c3 0f <1f> 44 00 00 55 48 89 e5 f0 ff 8f c8 00 00 00 0f 88 9a 47 4a 00 74 2021-04-24T18:03:53.804319Z WARNING kernel: [ 516.876918] RSP: 0018:ffff9b4d809fbe38 EFLAGS: 00010286 2021-04-24T18:03:53.804320Z WARNING kernel: [ 516.876919] RAX: 0000000000000007 RBX: ffff927915079600 RCX: 0000000000000007 2021-04-24T18:03:53.804320Z WARNING kernel: [ 516.876921] RDX: ffff9b4d809fbe40 RSI: 0000000000000286 RDI: ffff927915079600 2021-04-24T18:03:53.804321Z WARNING kernel: [ 516.876922] RBP: ffff9b4d809fbe68 R08: 8080808080808080 R09: fefefefefefefeff 2021-04-24T18:03:53.804321Z WARNING kernel: [ 516.876924] R10: 0000000000000010 R11: ffffffff92e44bd8 R12: ffff9279150796a0 2021-04-24T18:03:53.804322Z WARNING kernel: [ 516.876925] R13: ffff92791c368180 R14: ffff927915079640 R15: 000000001c867605 2021-04-24T18:03:53.804323Z WARNING kernel: [ 516.876926] FS: 0000000000000000(0000) GS:ffff92791ffc0000(0000) knlGS:0000000000000000 2021-04-24T18:03:53.804323Z WARNING kernel: [ 516.876928] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 2021-04-24T18:03:53.804324Z WARNING kernel: [ 516.876929] CR2: 0000239514955000 CR3: 00000007f82da001 CR4: 0000000000760ee0 2021-04-24T18:03:53.804325Z WARNING kernel: [ 516.876930] PKRU: 55555554 2021-04-24T18:03:53.804325Z WARNING kernel: [ 516.876931] Call Trace: 2021-04-24T18:03:53.804326Z WARNING kernel: [ 516.876935] __active_retire+0x77/0xcf 2021-04-24T18:03:53.804326Z WARNING kernel: [ 516.876939] process_one_work+0x1da/0x394 2021-04-24T18:03:53.804327Z WARNING kernel: [ 516.876941] worker_thread+0x216/0x375 2021-04-24T18:03:53.804327Z WARNING kernel: [ 516.876944] kthread+0x147/0x156 2021-04-24T18:03:53.804335Z WARNING kernel: [ 516.876946] ? pr_cont_work+0x58/0x58 2021-04-24T18:03:53.804335Z WARNING kernel: [ 516.876948] ? kthread_blkcg+0x2e/0x2e 2021-04-24T18:03:53.804336Z WARNING kernel: [ 516.876950] ret_from_fork+0x1f/0x40 2021-04-24T18:03:53.804336Z WARNING kernel: [ 516.876952] Modules linked in: cdc_mbim cdc_ncm cdc_wdm xt_cgroup rfcomm cmac algif_hash algif_skcipher af_alg xt_MASQUERADE uinput snd_soc_rt5682_sdw snd_soc_rt5682 snd_soc_max98373_sdw snd_soc_max98373 snd_soc_rl6231 regmap_sdw snd_soc_sof_sdw snd_soc_hdac_hdmi snd_soc_dmic snd_hda_codec_hdmi snd_sof_pci snd_sof_intel_hda_common intel_ipu6_psys snd_sof_xtensa_dsp soundwire_intel soundwire_generic_allocation soundwire_cadence snd_sof_intel_hda snd_sof snd_soc_hdac_hda snd_soc_acpi_intel_match snd_soc_acpi snd_hda_ext_core soundwire_bus snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core intel_ipu6_isys videobuf2_dma_contig videobuf2_v4l2 videobuf2_common videobuf2_memops mei_hdcp intel_ipu6 ov2740 ov8856 at24 sx9310 dw9768 v4l2_fwnode cros_ec_typec intel_pmc_mux roles acpi_als typec fuse iio_trig_sysfs cros_ec_light_prox cros_ec_lid_angle cros_ec_sensors cros ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix possible invalid register access Disable the interrupt and synchronze for the pending irq handlers to ensure the irq tasklet is not being scheduled after the suspend to avoid the possible invalid register access acts when the host pcie controller is suspended. [17932.910534] mt7921e 0000:01:00.0: pci_pm_suspend+0x0/0x22c returned 0 after 21375 usecs [17932.910590] pcieport 0000:00:00.0: calling pci_pm_suspend+0x0/0x22c @ 18565, parent: pci0000:00 [17932.910602] pcieport 0000:00:00.0: pci_pm_suspend+0x0/0x22c returned 0 after 8 usecs [17932.910671] mtk-pcie 11230000.pcie: calling platform_pm_suspend+0x0/0x60 @ 22783, parent: soc [17932.910674] mtk-pcie 11230000.pcie: platform_pm_suspend+0x0/0x60 returned 0 after 0 usecs ... 17933.615352] x1 : 00000000000d4200 x0 : ffffff8269ca2300 [17933.620666] Call trace: [17933.623127] mt76_mmio_rr+0x28/0xf0 [mt76] [17933.627234] mt7921_rr+0x38/0x44 [mt7921e] [17933.631339] mt7921_irq_tasklet+0x54/0x1d8 [mt7921e] [17933.636309] tasklet_action_common+0x12c/0x16c [17933.640754] tasklet_action+0x24/0x2c [17933.644418] __do_softirq+0x16c/0x344 [17933.648082] irq_exit+0xa8/0xac [17933.651224] scheduler_ipi+0xd4/0x148 [17933.654890] handle_IPI+0x164/0x2d4 [17933.658379] gic_handle_irq+0x140/0x178 [17933.662216] el1_irq+0xb8/0x180 [17933.665361] cpuidle_enter_state+0xf8/0x204 [17933.669544] cpuidle_enter+0x38/0x4c [17933.673122] do_idle+0x1a4/0x2a8 [17933.676352] cpu_startup_entry+0x24/0x28 [17933.680276] rest_init+0xd4/0xe0 [17933.683508] arch_call_rest_init+0x10/0x18 [17933.687606] start_kernel+0x340/0x3b4 [17933.691279] Code: aa0003f5 d503201f f953eaa8 8b344108 (b9400113) [17933.697373] ---[ end trace a24b8e26ffbda3c5 ]--- [17933.767846] Kernel panic - not syncing: Fatal exception in interrupt

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix mmap to include VM_IO and VM_DONTDUMP In commit 510410bfc034 ("drm/msm: Implement mmap as GEM object function") we switched to a new/cleaner method of doing things. That's good, but we missed a little bit. Before that commit, we used to _first_ run through the drm_gem_mmap_obj() case where `obj->funcs->mmap()` was NULL. That meant that we ran: vma->vm_flags |= VM_IO | VM_PFNMAP | VM_DONTEXPAND | VM_DONTDUMP; vma->vm_page_prot = pgprot_writecombine(vm_get_page_prot(vma->vm_flags)); vma->vm_page_prot = pgprot_decrypted(vma->vm_page_prot); ...and _then_ we modified those mappings with our own. Now that `obj->funcs->mmap()` is no longer NULL we don't run the default code. It looks like the fact that the vm_flags got VM_IO / VM_DONTDUMP was important because we're now getting crashes on Chromebooks that use ARC++ while logging out. Specifically a crash that looks like this (this is on a 5.10 kernel w/ relevant backports but also seen on a 5.15 kernel): Unable to handle kernel paging request at virtual address ffffffc008000000 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000008293d000 [ffffffc008000000] pgd=00000001002b3003, p4d=00000001002b3003, pud=00000001002b3003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP [...] CPU: 7 PID: 15734 Comm: crash_dump64 Tainted: G W 5.10.67 #1 [...] Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT) pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) pc : __arch_copy_to_user+0xc0/0x30c lr : copyout+0xac/0x14c [...] Call trace: __arch_copy_to_user+0xc0/0x30c copy_page_to_iter+0x1a0/0x294 process_vm_rw_core+0x240/0x408 process_vm_rw+0x110/0x16c __arm64_sys_process_vm_readv+0x30/0x3c el0_svc_common+0xf8/0x250 do_el0_svc+0x30/0x80 el0_svc+0x10/0x1c el0_sync_handler+0x78/0x108 el0_sync+0x184/0x1c0 Code: f8408423 f80008c3 910020c6 36100082 (b8404423) Let's add the two flags back in. While we're at it, the fact that we aren't running the default means that we _don't_ need to clear out VM_PFNMAP, so remove that and save an instruction. NOTE: it was confirmed that VM_IO was the important flag to fix the problem I was seeing, but adding back VM_DONTDUMP seems like a sane thing to do so I'm doing that too.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix freeing of uninitialized misc IRQ vector When VSI set up failed in i40e_probe() as part of PF switch set up driver was trying to free misc IRQ vectors in i40e_clear_interrupt_scheme and produced a kernel Oops: Trying to free already-free IRQ 266 WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300 Workqueue: events work_for_cpu_fn RIP: 0010:__free_irq+0x9a/0x300 Call Trace: ? synchronize_irq+0x3a/0xa0 free_irq+0x2e/0x60 i40e_clear_interrupt_scheme+0x53/0x190 [i40e] i40e_probe.part.108+0x134b/0x1a40 [i40e] ? kmem_cache_alloc+0x158/0x1c0 ? acpi_ut_update_ref_count.part.1+0x8e/0x345 ? acpi_ut_update_object_reference+0x15e/0x1e2 ? strstr+0x21/0x70 ? irq_get_irq_data+0xa/0x20 ? mp_check_pin_attr+0x13/0xc0 ? irq_get_irq_data+0xa/0x20 ? mp_map_pin_to_irq+0xd3/0x2f0 ? acpi_register_gsi_ioapic+0x93/0x170 ? pci_conf1_read+0xa4/0x100 ? pci_bus_read_config_word+0x49/0x70 ? do_pci_enable_device+0xcc/0x100 local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The problem is that at that point misc IRQ vectors were not allocated yet and we get a call trace that driver is trying to free already free IRQ vectors. Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED PF state before calling i40e_free_misc_vector. This state is set only if misc IRQ vectors were properly initialized.

In the Linux kernel, the following vulnerability has been resolved: mm/slub: actually fix freelist pointer vs redzoning It turns out that SLUB redzoning ("slub_debug=Z") checks from s->object_size rather than from s->inuse (which is normally bumped to make room for the freelist pointer), so a cache created with an object size less than 24 would have the freelist pointer written beyond s->object_size, causing the redzone to be corrupted by the freelist pointer. This was very visible with "slub_debug=ZF": BUG test (Tainted: G B ): Right Redzone overwritten ----------------------------------------------------------------------------- INFO: 0xffff957ead1c05de-0xffff957ead1c05df @offset=1502. First byte 0x1a instead of 0xbb INFO: Slab 0xffffef3950b47000 objects=170 used=170 fp=0x0000000000000000 flags=0x8000000000000200 INFO: Object 0xffff957ead1c05d8 @offset=1496 fp=0xffff957ead1c0620 Redzone (____ptrval____): bb bb bb bb bb bb bb bb ........ Object (____ptrval____): 00 00 00 00 00 f6 f4 a5 ........ Redzone (____ptrval____): 40 1d e8 1a aa @.... Padding (____ptrval____): 00 00 00 00 00 00 00 00 ........ Adjust the offset to stay within s->object_size. (Note that no caches of in this size range are known to exist in the kernel currently.)

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix memory leak on object td Two error return paths are neglecting to free allocated object td, causing a memory leak. Fix this by returning via the error return path that securely kfree's td. Fixes clang scan-build warning: security/keys/trusted-keys/trusted_tpm1.c:496:10: warning: Potential memory leak [unix.Malloc]

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_IDLETIMER: fix panic that occurs when timer_type has garbage value Currently, when the rule related to IDLETIMER is added, idletimer_tg timer structure is initialized by kmalloc on executing idletimer_tg_create function. However, in this process timer->timer_type is not defined to a specific value. Thus, timer->timer_type has garbage value and it occurs kernel panic. So, this commit fixes the panic by initializing timer->timer_type using kzalloc instead of kmalloc. Test commands: # iptables -A OUTPUT -j IDLETIMER --timeout 1 --label test $ cat /sys/class/xt_idletimer/timers/test Killed Splat looks like: BUG: KASAN: user-memory-access in alarm_expires_remaining+0x49/0x70 Read of size 8 at addr 0000002e8c7bc4c8 by task cat/917 CPU: 12 PID: 917 Comm: cat Not tainted 5.14.0+ #3 79940a339f71eb14fc81aee1757a20d5bf13eb0e Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: dump_stack_lvl+0x6e/0x9c kasan_report.cold+0x112/0x117 ? alarm_expires_remaining+0x49/0x70 __asan_load8+0x86/0xb0 alarm_expires_remaining+0x49/0x70 idletimer_tg_show+0xe5/0x19b [xt_IDLETIMER 11219304af9316a21bee5ba9d58f76a6b9bccc6d] dev_attr_show+0x3c/0x60 sysfs_kf_seq_show+0x11d/0x1f0 ? device_remove_bin_file+0x20/0x20 kernfs_seq_show+0xa4/0xb0 seq_read_iter+0x29c/0x750 kernfs_fop_read_iter+0x25a/0x2c0 ? __fsnotify_parent+0x3d1/0x570 ? iov_iter_init+0x70/0x90 new_sync_read+0x2a7/0x3d0 ? __x64_sys_llseek+0x230/0x230 ? rw_verify_area+0x81/0x150 vfs_read+0x17b/0x240 ksys_read+0xd9/0x180 ? vfs_write+0x460/0x460 ? do_syscall_64+0x16/0xc0 ? lockdep_hardirqs_on+0x79/0x120 __x64_sys_read+0x43/0x50 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f0cdc819142 Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 RSP: 002b:00007fff28eee5b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f0cdc819142 RDX: 0000000000020000 RSI: 00007f0cdc032000 RDI: 0000000000000003 RBP: 00007f0cdc032000 R08: 00007f0cdc031010 R09: 0000000000000000 R10: 0000000000000022 R11: 0000000000000246 R12: 00005607e9ee31f0 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000

In the Linux kernel, the following vulnerability has been resolved: xdp, net: Fix use-after-free in bpf_xdp_link_release The problem occurs between dev_get_by_index() and dev_xdp_attach_link(). At this point, dev_xdp_uninstall() is called. Then xdp link will not be detached automatically when dev is released. But link->dev already points to dev, when xdp link is released, dev will still be accessed, but dev has been released. dev_get_by_index() | link->dev = dev | | rtnl_lock() | unregister_netdevice_many() | dev_xdp_uninstall() | rtnl_unlock() rtnl_lock(); | dev_xdp_attach_link() | rtnl_unlock(); | | netdev_run_todo() // dev released bpf_xdp_link_release() | /* access dev. | use-after-free */ | [ 45.966867] BUG: KASAN: use-after-free in bpf_xdp_link_release+0x3b8/0x3d0 [ 45.967619] Read of size 8 at addr ffff00000f9980c8 by task a.out/732 [ 45.968297] [ 45.968502] CPU: 1 PID: 732 Comm: a.out Not tainted 5.13.0+ #22 [ 45.969222] Hardware name: linux,dummy-virt (DT) [ 45.969795] Call trace: [ 45.970106] dump_backtrace+0x0/0x4c8 [ 45.970564] show_stack+0x30/0x40 [ 45.970981] dump_stack_lvl+0x120/0x18c [ 45.971470] print_address_description.constprop.0+0x74/0x30c [ 45.972182] kasan_report+0x1e8/0x200 [ 45.972659] __asan_report_load8_noabort+0x2c/0x50 [ 45.973273] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.973834] bpf_link_free+0xd0/0x188 [ 45.974315] bpf_link_put+0x1d0/0x218 [ 45.974790] bpf_link_release+0x3c/0x58 [ 45.975291] __fput+0x20c/0x7e8 [ 45.975706] ____fput+0x24/0x30 [ 45.976117] task_work_run+0x104/0x258 [ 45.976609] do_notify_resume+0x894/0xaf8 [ 45.977121] work_pending+0xc/0x328 [ 45.977575] [ 45.977775] The buggy address belongs to the page: [ 45.978369] page:fffffc00003e6600 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4f998 [ 45.979522] flags: 0x7fffe0000000000(node=0|zone=0|lastcpupid=0x3ffff) [ 45.980349] raw: 07fffe0000000000 fffffc00003e6708 ffff0000dac3c010 0000000000000000 [ 45.981309] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 45.982259] page dumped because: kasan: bad access detected [ 45.982948] [ 45.983153] Memory state around the buggy address: [ 45.983753] ffff00000f997f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.984645] ffff00000f998000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.985533] >ffff00000f998080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.986419] ^ [ 45.987112] ffff00000f998100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988006] ffff00000f998180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988895] ================================================================== [ 45.989773] Disabling lock debugging due to kernel taint [ 45.990552] Kernel panic - not syncing: panic_on_warn set ... [ 45.991166] CPU: 1 PID: 732 Comm: a.out Tainted: G B 5.13.0+ #22 [ 45.991929] Hardware name: linux,dummy-virt (DT) [ 45.992448] Call trace: [ 45.992753] dump_backtrace+0x0/0x4c8 [ 45.993208] show_stack+0x30/0x40 [ 45.993627] dump_stack_lvl+0x120/0x18c [ 45.994113] dump_stack+0x1c/0x34 [ 45.994530] panic+0x3a4/0x7d8 [ 45.994930] end_report+0x194/0x198 [ 45.995380] kasan_report+0x134/0x200 [ 45.995850] __asan_report_load8_noabort+0x2c/0x50 [ 45.996453] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.997007] bpf_link_free+0xd0/0x188 [ 45.997474] bpf_link_put+0x1d0/0x218 [ 45.997942] bpf_link_release+0x3c/0x58 [ 45.998429] __fput+0x20c/0x7e8 [ 45.998833] ____fput+0x24/0x30 [ 45.999247] task_work_run+0x104/0x258 [ 45.999731] do_notify_resume+0x894/0xaf8 [ 46.000236] work_pending ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: implement lockless setsockopt(SO_PEEK_OFF) syzbot reported a lockdep violation [1] involving af_unix support of SO_PEEK_OFF. Since SO_PEEK_OFF is inherently not thread safe (it uses a per-socket sk_peek_off field), there is really no point to enforce a pointless thread safety in the kernel. After this patch : - setsockopt(SO_PEEK_OFF) no longer acquires the socket lock. - skb_consume_udp() no longer has to acquire the socket lock. - af_unix no longer needs a special version of sk_set_peek_off(), because it does not lock u->iolock anymore. As a followup, we could replace prot->set_peek_off to be a boolean and avoid an indirect call, since we always use sk_set_peek_off(). [1] WARNING: possible circular locking dependency detected 6.8.0-rc4-syzkaller-00267-g0f1dd5e91e2b #0 Not tainted syz-executor.2/30025 is trying to acquire lock: ffff8880765e7d80 (&u->iolock){+.+.}-{3:3}, at: unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789 but task is already holding lock: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1691 [inline] ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sockopt_lock_sock net/core/sock.c:1060 [inline] ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sk_setsockopt+0xe52/0x3360 net/core/sock.c:1193 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_UNIX){+.+.}-{0:0}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 lock_sock_nested+0x48/0x100 net/core/sock.c:3524 lock_sock include/net/sock.h:1691 [inline] __unix_dgram_recvmsg+0x1275/0x12c0 net/unix/af_unix.c:2415 sock_recvmsg_nosec+0x18e/0x1d0 net/socket.c:1046 ____sys_recvmsg+0x3c0/0x470 net/socket.c:2801 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x474/0xae0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 -> #0 (&u->iolock){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789 sk_setsockopt+0x207e/0x3360 do_sock_setsockopt+0x2fb/0x720 net/socket.c:2307 __sys_setsockopt+0x1ad/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_UNIX); lock(&u->iolock); lock(sk_lock-AF_UNIX); lock(&u->iolock); *** DEADLOCK *** 1 lock held by syz-executor.2/30025: #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1691 [inline] #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sockopt_lock_sock net/core/sock.c:1060 [inline] #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sk_setsockopt+0xe52/0x3360 net/core/sock.c:1193 stack backtrace: CPU: 0 PID: 30025 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-00267-g0f1dd5e91e2b #0 Hardware name: Google Google C ---truncated---

In the Linux kernel, the following vulnerability has been resolved: dm btree remove: assign new_root only when removal succeeds remove_raw() in dm_btree_remove() may fail due to IO read error (e.g. read the content of origin block fails during shadowing), and the value of shadow_spine::root is uninitialized, but the uninitialized value is still assign to new_root in the end of dm_btree_remove(). For dm-thin, the value of pmd->details_root or pmd->root will become an uninitialized value, so if trying to read details_info tree again out-of-bound memory may occur as showed below: general protection fault, probably for non-canonical address 0x3fdcb14c8d7520 CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6 Hardware name: QEMU Standard PC RIP: 0010:metadata_ll_load_ie+0x14/0x30 Call Trace: sm_metadata_count_is_more_than_one+0xb9/0xe0 dm_tm_shadow_block+0x52/0x1c0 shadow_step+0x59/0xf0 remove_raw+0xb2/0x170 dm_btree_remove+0xf4/0x1c0 dm_pool_delete_thin_device+0xc3/0x140 pool_message+0x218/0x2b0 target_message+0x251/0x290 ctl_ioctl+0x1c4/0x4d0 dm_ctl_ioctl+0xe/0x20 __x64_sys_ioctl+0x7b/0xb0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixing it by only assign new_root when removal succeeds

In the Linux kernel, the following vulnerability has been resolved: tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized This commit fixes a bug (found by syzkaller) that could cause spurious double-initializations for congestion control modules, which could cause memory leaks or other problems for congestion control modules (like CDG) that allocate memory in their init functions. The buggy scenario constructed by syzkaller was something like: (1) create a TCP socket (2) initiate a TFO connect via sendto() (3) while socket is in TCP_SYN_SENT, call setsockopt(TCP_CONGESTION), which calls: tcp_set_congestion_control() -> tcp_reinit_congestion_control() -> tcp_init_congestion_control() (4) receive ACK, connection is established, call tcp_init_transfer(), set icsk_ca_initialized=0 (without first calling cc->release()), call tcp_init_congestion_control() again. Note that in this sequence tcp_init_congestion_control() is called twice without a cc->release() call in between. Thus, for CC modules that allocate memory in their init() function, e.g, CDG, a memory leak may occur. The syzkaller tool managed to find a reproducer that triggered such a leak in CDG. The bug was introduced when that commit 8919a9b31eb4 ("tcp: Only init congestion control if not initialized already") introduced icsk_ca_initialized and set icsk_ca_initialized to 0 in tcp_init_transfer(), missing the possibility for a sequence like the one above, where a process could call setsockopt(TCP_CONGESTION) in state TCP_SYN_SENT (i.e. after the connect() or TFO open sendmsg()), which would call tcp_init_congestion_control(). It did not intend to reset any initialization that the user had already explicitly made; it just missed the possibility of that particular sequence (which syzkaller managed to find).

In the Linux kernel, the following vulnerability has been resolved: phonet/pep: refuse to enable an unbound pipe This ioctl() implicitly assumed that the socket was already bound to a valid local socket name, i.e. Phonet object. If the socket was not bound, two separate problems would occur: 1) We'd send an pipe enablement request with an invalid source object. 2) Later socket calls could BUG on the socket unexpectedly being connected yet not bound to a valid object.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/devfreq: Fix OPP refcnt leak

In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: fix memory leak in mcba_usb Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS Analyzer Tool. The problem was in unfreed usb_coherent. In mcba_usb_start() 20 coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see mcba_usb_start) and this flag cannot be used with coherent buffers. Fail log: | [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected | [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem) So, all allocated buffers should be freed with usb_free_coherent() explicitly NOTE: The same pattern for allocating and freeing coherent buffers is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c

In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Fix a memory leak in error handling paths If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be updated and 'hv_uio_cleanup()' in the error handling path will not be able to free the corresponding buffer. In such a case, we need to free the buffer explicitly.

In the Linux kernel, the following vulnerability has been resolved: phy: mdio: fix memory leak Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure.

In the Linux kernel, the following vulnerability has been resolved: sit: do not call ipip6_dev_free() from sit_init_net() ipip6_dev_free is sit dev->priv_destructor, already called by register_netdevice() if something goes wrong. Alternative would be to make ipip6_dev_free() robust against multiple invocations, but other drivers do not implement this strategy. syzbot reported: dst_release underflow WARNING: CPU: 0 PID: 5059 at net/core/dst.c:173 dst_release+0xd8/0xe0 net/core/dst.c:173 Modules linked in: CPU: 1 PID: 5059 Comm: syz-executor.4 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:dst_release+0xd8/0xe0 net/core/dst.c:173 Code: 4c 89 f2 89 d9 31 c0 5b 41 5e 5d e9 da d5 44 f9 e8 1d 90 5f f9 c6 05 87 48 c6 05 01 48 c7 c7 80 44 99 8b 31 c0 e8 e8 67 29 f9 <0f> 0b eb 85 0f 1f 40 00 53 48 89 fb e8 f7 8f 5f f9 48 83 c3 a8 48 RSP: 0018:ffffc9000aa5faa0 EFLAGS: 00010246 RAX: d6894a925dd15a00 RBX: 00000000ffffffff RCX: 0000000000040000 RDX: ffffc90005e19000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: 0000000000000000 R08: ffffffff816a1f42 R09: ffffed1017344f2c R10: ffffed1017344f2c R11: 0000000000000000 R12: 0000607f462b1358 R13: 1ffffffff1bfd305 R14: ffffe8ffffcb1358 R15: dffffc0000000000 FS: 00007f66c71a2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88aaed5058 CR3: 0000000023e0f000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dst_cache_destroy+0x107/0x1e0 net/core/dst_cache.c:160 ipip6_dev_free net/ipv6/sit.c:1414 [inline] sit_init_net+0x229/0x550 net/ipv6/sit.c:1936 ops_init+0x313/0x430 net/core/net_namespace.c:140 setup_net+0x35b/0x9d0 net/core/net_namespace.c:326 copy_net_ns+0x359/0x5c0 net/core/net_namespace.c:470 create_new_namespaces+0x4ce/0xa00 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x11e/0x180 kernel/nsproxy.c:226 ksys_unshare+0x57d/0xb50 kernel/fork.c:3075 __do_sys_unshare kernel/fork.c:3146 [inline] __se_sys_unshare kernel/fork.c:3144 [inline] __x64_sys_unshare+0x34/0x40 kernel/fork.c:3144 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f66c882ce99 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f66c71a2168 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f66c893ff60 RCX: 00007f66c882ce99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000048040200 RBP: 00007f66c8886ff1 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff6634832f R14: 00007f66c71a2300 R15: 0000000000022000 </TASK>

In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Disable preemption when probing user return MSRs Disable preemption when probing a user return MSR via RDSMR/WRMSR. If the MSR holds a different value per logical CPU, the WRMSR could corrupt the host's value if KVM is preempted between the RDMSR and WRMSR, and then rescheduled on a different CPU. Opportunistically land the helper in common x86, SVM will use the helper in a future commit.

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix deadlock in concurrent rename whiteout and inode writeback Following hung tasks: [ 77.028764] task:kworker/u8:4 state:D stack: 0 pid: 132 [ 77.028820] Call Trace: [ 77.029027] schedule+0x8c/0x1b0 [ 77.029067] mutex_lock+0x50/0x60 [ 77.029074] ubifs_write_inode+0x68/0x1f0 [ubifs] [ 77.029117] __writeback_single_inode+0x43c/0x570 [ 77.029128] writeback_sb_inodes+0x259/0x740 [ 77.029148] wb_writeback+0x107/0x4d0 [ 77.029163] wb_workfn+0x162/0x7b0 [ 92.390442] task:aa state:D stack: 0 pid: 1506 [ 92.390448] Call Trace: [ 92.390458] schedule+0x8c/0x1b0 [ 92.390461] wb_wait_for_completion+0x82/0xd0 [ 92.390469] __writeback_inodes_sb_nr+0xb2/0x110 [ 92.390472] writeback_inodes_sb_nr+0x14/0x20 [ 92.390476] ubifs_budget_space+0x705/0xdd0 [ubifs] [ 92.390503] do_rename.cold+0x7f/0x187 [ubifs] [ 92.390549] ubifs_rename+0x8b/0x180 [ubifs] [ 92.390571] vfs_rename+0xdb2/0x1170 [ 92.390580] do_renameat2+0x554/0x770 , are caused by concurrent rename whiteout and inode writeback processes: rename_whiteout(Thread 1) wb_workfn(Thread2) ubifs_rename do_rename lock_4_inodes (Hold ui_mutex) ubifs_budget_space make_free_space shrink_liability __writeback_inodes_sb_nr bdi_split_work_to_wbs (Queue new wb work) wb_do_writeback(wb work) __writeback_single_inode ubifs_write_inode LOCK(ui_mutex) ↑ wb_wait_for_completion (Wait wb work) <-- deadlock! Reproducer (Detail program in [Link]): 1. SYS_renameat2("/mp/dir/file", "/mp/dir/whiteout", RENAME_WHITEOUT) 2. Consume out of space before kernel(mdelay) doing budget for whiteout Fix it by doing whiteout space budget before locking ubifs inodes. BTW, it also fixes wrong goto tag 'out_release' in whiteout budget error handling path(It should at least recover dir i_size and unlock 4 ubifs inodes).

In the Linux kernel, the following vulnerability has been resolved: driver core: auxiliary bus: Fix memory leak when driver_register() fail If driver_register() returns with error we need to free the memory allocated for auxdrv->driver.name before returning from __auxiliary_driver_register()

In the Linux kernel, the following vulnerability has been resolved: net:sfc: fix non-freed irq in legacy irq mode SFC driver can be configured via modparam to work using MSI-X, MSI or legacy IRQ interrupts. In the last one, the interrupt was not properly released on module remove. It was not freed because the flag irqs_hooked was not set during initialization in the case of using legacy IRQ. Example of (trimmed) trace during module remove without this fix: remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1' WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170 ...trimmed... Call Trace: unregister_irq_proc+0xe3/0x100 free_desc+0x29/0x70 irq_free_descs+0x47/0x70 mp_unmap_irq+0x58/0x60 acpi_unregister_gsi_ioapic+0x2a/0x40 acpi_pci_irq_disable+0x78/0xb0 pci_disable_device+0xd1/0x100 efx_pci_remove+0xa1/0x1e0 [sfc] pci_device_remove+0x38/0xa0 __device_release_driver+0x177/0x230 driver_detach+0xcb/0x110 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x2a/0xb0 efx_exit_module+0x24/0xf40 [sfc] __do_sys_delete_module.constprop.0+0x171/0x280 ? exit_to_user_mode_prepare+0x83/0x1d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9f9385800b ...trimmed...

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: CT, Fix multiple allocations and memleak of mod acts CT clear action offload adds additional mod hdr actions to the flow's original mod actions in order to clear the registers which hold ct_state. When such flow also includes encap action, a neigh update event can cause the driver to unoffload the flow and then reoffload it. Each time this happens, the ct clear handling adds that same set of mod hdr actions to reset ct_state until the max of mod hdr actions is reached. Also the driver never releases the allocated mod hdr actions and causing a memleak. Fix above two issues by moving CT clear mod acts allocation into the parsing actions phase and only use it when offloading the rule. The release of mod acts will be done in the normal flow_put(). backtrace: [<000000007316e2f3>] krealloc+0x83/0xd0 [<00000000ef157de1>] mlx5e_mod_hdr_alloc+0x147/0x300 [mlx5_core] [<00000000970ce4ae>] mlx5e_tc_match_to_reg_set_and_get_id+0xd7/0x240 [mlx5_core] [<0000000067c5fa17>] mlx5e_tc_match_to_reg_set+0xa/0x20 [mlx5_core] [<00000000d032eb98>] mlx5_tc_ct_entry_set_registers.isra.0+0x36/0xc0 [mlx5_core] [<00000000fd23b869>] mlx5_tc_ct_flow_offload+0x272/0x1f10 [mlx5_core] [<000000004fc24acc>] mlx5e_tc_offload_fdb_rules.part.0+0x150/0x620 [mlx5_core] [<00000000dc741c17>] mlx5e_tc_encap_flows_add+0x489/0x690 [mlx5_core] [<00000000e92e49d7>] mlx5e_rep_update_flows+0x6e4/0x9b0 [mlx5_core] [<00000000f60f5602>] mlx5e_rep_neigh_update+0x39a/0x5d0 [mlx5_core]

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Fix potential VPE leak on error In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error, there is an off-by-one in the number of VPEs to be freed. Fix it by simply passing the number of VPEs allocated, which is the index of the loop iterating over the VPEs. [maz: fixed commit message]

In the Linux kernel, the following vulnerability has been resolved: tty: serial: 8250: serial_cs: Fix a memory leak in error handling path In the probe function, if the final 'serial_config()' fails, 'info' is leaking. Add a resource handling path to free this memory.

In the Linux kernel, the following vulnerability has been resolved: USB: usbfs: Don't WARN about excessively large memory allocations Syzbot found that the kernel generates a WARNing if the user tries to submit a bulk transfer through usbfs with a buffer that is way too large. This isn't a bug in the kernel; it's merely an invalid request from the user and the usbfs code does handle it correctly. In theory the same thing can happen with async transfers, or with the packet descriptor table for isochronous transfers. To prevent the MM subsystem from complaining about these bad allocation requests, add the __GFP_NOWARN flag to the kmalloc calls for these buffers.

In the Linux kernel, the following vulnerability has been resolved: media: zr364xx: fix memory leak in zr364xx_start_readpipe syzbot reported memory leak in zr364xx driver. The problem was in non-freed urb in case of usb_submit_urb() fail. backtrace: [<ffffffff82baedf6>] kmalloc include/linux/slab.h:561 [inline] [<ffffffff82baedf6>] usb_alloc_urb+0x66/0xe0 drivers/usb/core/urb.c:74 [<ffffffff82f7cce8>] zr364xx_start_readpipe+0x78/0x130 drivers/media/usb/zr364xx/zr364xx.c:1022 [<ffffffff84251dfc>] zr364xx_board_init drivers/media/usb/zr364xx/zr364xx.c:1383 [inline] [<ffffffff84251dfc>] zr364xx_probe+0x6a3/0x851 drivers/media/usb/zr364xx/zr364xx.c:1516 [<ffffffff82bb6507>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff826018a9>] really_probe+0x159/0x500 drivers/base/dd.c:576

In the Linux kernel, the following vulnerability has been resolved: mptcp: ensure tx skbs always have the MPTCP ext Due to signed/unsigned comparison, the expression: info->size_goal - skb->len > 0 evaluates to true when the size goal is smaller than the skb size. That results in lack of tx cache refill, so that the skb allocated by the core TCP code lacks the required MPTCP skb extensions. Due to the above, syzbot is able to trigger the following WARN_ON(): WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Modules linked in: CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9 RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216 RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000 RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003 RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280 R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0 FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003 release_sock+0xb4/0x1b0 net/core/sock.c:3206 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057 call_write_iter include/linux/fs.h:2163 [inline] new_sync_write+0x40b/0x640 fs/read_write.c:507 vfs_write+0x7cf/0xae0 fs/read_write.c:594 ksys_write+0x1ee/0x250 fs/read_write.c:647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9 RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038 R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000 Fix the issue rewriting the relevant expression to avoid sign-related problems - note: size_goal is always >= 0. Additionally, ensure that the skb in the tx cache always carries the relevant extension.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation The reference counting issue happens in several exception handling paths of arm_smmu_iova_to_phys_hard(). When those error scenarios occur, the function forgets to decrease the refcount of "smmu" increased by arm_smmu_rpm_get(), causing a refcount leak. Fix this issue by jumping to "out" label when those error scenarios occur.

In the Linux kernel, the following vulnerability has been resolved: bpf, lockdown, audit: Fix buggy SELinux lockdown permission checks Commit 59438b46471a ("security,lockdown,selinux: implement SELinux lockdown") added an implementation of the locked_down LSM hook to SELinux, with the aim to restrict which domains are allowed to perform operations that would breach lockdown. This is indirectly also getting audit subsystem involved to report events. The latter is problematic, as reported by Ondrej and Serhei, since it can bring down the whole system via audit: 1) The audit events that are triggered due to calls to security_locked_down() can OOM kill a machine, see below details [0]. 2) It also seems to be causing a deadlock via avc_has_perm()/slow_avc_audit() when trying to wake up kauditd, for example, when using trace_sched_switch() tracepoint, see details in [1]. Triggering this was not via some hypothetical corner case, but with existing tools like runqlat & runqslower from bcc, for example, which make use of this tracepoint. Rough call sequence goes like: rq_lock(rq) -> -------------------------+ trace_sched_switch() -> | bpf_prog_xyz() -> +-> deadlock selinux_lockdown() -> | audit_log_end() -> | wake_up_interruptible() -> | try_to_wake_up() -> | rq_lock(rq) --------------+ What's worse is that the intention of 59438b46471a to further restrict lockdown settings for specific applications in respect to the global lockdown policy is completely broken for BPF. The SELinux policy rule for the current lockdown check looks something like this: allow <who> <who> : lockdown { <reason> }; However, this doesn't match with the 'current' task where the security_locked_down() is executed, example: httpd does a syscall. There is a tracing program attached to the syscall which triggers a BPF program to run, which ends up doing a bpf_probe_read_kernel{,_str}() helper call. The selinux_lockdown() hook does the permission check against 'current', that is, httpd in this example. httpd has literally zero relation to this tracing program, and it would be nonsensical having to write an SELinux policy rule against httpd to let the tracing helper pass. The policy in this case needs to be against the entity that is installing the BPF program. For example, if bpftrace would generate a histogram of syscall counts by user space application: bpftrace -e 'tracepoint:raw_syscalls:sys_enter { @[comm] = count(); }' bpftrace would then go and generate a BPF program from this internally. One way of doing it [for the sake of the example] could be to call bpf_get_current_task() helper and then access current->comm via one of bpf_probe_read_kernel{,_str}() helpers. So the program itself has nothing to do with httpd or any other random app doing a syscall here. The BPF program _explicitly initiated_ the lockdown check. The allow/deny policy belongs in the context of bpftrace: meaning, you want to grant bpftrace access to use these helpers, but other tracers on the system like my_random_tracer _not_. Therefore fix all three issues at the same time by taking a completely different approach for the security_locked_down() hook, that is, move the check into the program verification phase where we actually retrieve the BPF func proto. This also reliably gets the task (current) that is trying to install the BPF tracing program, e.g. bpftrace/bcc/perf/systemtap/etc, and it also fixes the OOM since we're moving this out of the BPF helper's fast-path which can be called several millions of times per second. The check is then also in line with other security_locked_down() hooks in the system where the enforcement is performed at open/load time, for example, open_kcore() for /proc/kcore access or module_sig_check() for module signatures just to pick f ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mld: fix panic in mld_newpack() mld_newpack() doesn't allow to allocate high order page, only order-0 allocation is allowed. If headroom size is too large, a kernel panic could occur in skb_put(). Test commands: ip netns del A ip netns del B ip netns add A ip netns add B ip link add veth0 type veth peer name veth1 ip link set veth0 netns A ip link set veth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set veth0 up ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0 ip netns exec B ip link set lo up ip netns exec B ip link set veth1 up ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1 for i in {1..99} do let A=$i-1 ip netns exec A ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100 ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i ip netns exec A ip link set ip6gre$i up ip netns exec B ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100 ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i ip netns exec B ip link set ip6gre$i up done Splat looks like: kernel BUG at net/core/skbuff.c:110! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ #891 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x15d/0x15f Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83 41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20 RSP: 0018:ffff88810091f820 EFLAGS: 00010282 RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000 RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031 R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028 R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0 FS: 0000000000000000(0000) GS:ffff888117c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 skb_put.cold.104+0x22/0x22 ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? rcu_read_lock_sched_held+0x91/0xc0 mld_newpack+0x398/0x8f0 ? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600 ? lock_contended+0xc40/0xc40 add_grhead.isra.33+0x280/0x380 add_grec+0x5ca/0xff0 ? mld_sendpack+0xf40/0xf40 ? lock_downgrade+0x690/0x690 mld_send_initial_cr.part.34+0xb9/0x180 ipv6_mc_dad_complete+0x15d/0x1b0 addrconf_dad_completed+0x8d2/0xbb0 ? lock_downgrade+0x690/0x690 ? addrconf_rs_timer+0x660/0x660 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 Allowing high order page allocation could fix this problem.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mad: Improve handling of timed out WRs of mad agent Current timeout handler of mad agent acquires/releases mad_agent_priv lock for every timed out WRs. This causes heavy locking contention when higher no. of WRs are to be handled inside timeout handler. This leads to softlockup with below trace in some use cases where rdma-cm path is used to establish connection between peer nodes Trace: ----- BUG: soft lockup - CPU#4 stuck for 26s! [kworker/u128:3:19767] CPU: 4 PID: 19767 Comm: kworker/u128:3 Kdump: loaded Tainted: G OE ------- --- 5.14.0-427.13.1.el9_4.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.4.8 11/26/2019 Workqueue: ib_mad1 timeout_sends [ib_core] RIP: 0010:__do_softirq+0x78/0x2ac RSP: 0018:ffffb253449e4f98 EFLAGS: 00000246 RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 000000000000001f RDX: 000000000000001d RSI: 000000003d1879ab RDI: fff363b66fd3a86b RBP: ffffb253604cbcd8 R08: 0000009065635f3b R09: 0000000000000000 R10: 0000000000000040 R11: ffffb253449e4ff8 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff8caa1fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd9ec9db900 CR3: 0000000891934006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? __irq_exit_rcu+0xa1/0xc0 ? watchdog_timer_fn+0x1b2/0x210 ? __pfx_watchdog_timer_fn+0x10/0x10 ? __hrtimer_run_queues+0x127/0x2c0 ? hrtimer_interrupt+0xfc/0x210 ? __sysvec_apic_timer_interrupt+0x5c/0x110 ? sysvec_apic_timer_interrupt+0x37/0x90 ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? __do_softirq+0x78/0x2ac ? __do_softirq+0x60/0x2ac __irq_exit_rcu+0xa1/0xc0 sysvec_call_function_single+0x72/0x90 </IRQ> <TASK> asm_sysvec_call_function_single+0x16/0x20 RIP: 0010:_raw_spin_unlock_irq+0x14/0x30 RSP: 0018:ffffb253604cbd88 EFLAGS: 00000247 RAX: 000000000001960d RBX: 0000000000000002 RCX: ffff8cad2a064800 RDX: 000000008020001b RSI: 0000000000000001 RDI: ffff8cad5d39f66c RBP: ffff8cad5d39f600 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8caa443e0c00 R11: ffffb253604cbcd8 R12: ffff8cacb8682538 R13: 0000000000000005 R14: ffffb253604cbd90 R15: ffff8cad5d39f66c cm_process_send_error+0x122/0x1d0 [ib_cm] timeout_sends+0x1dd/0x270 [ib_core] process_one_work+0x1e2/0x3b0 ? __pfx_worker_thread+0x10/0x10 worker_thread+0x50/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xdd/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> Simplified timeout handler by creating local list of timed out WRs and invoke send handler post creating the list. The new method acquires/ releases lock once to fetch the list and hence helps to reduce locking contetiong when processing higher no. of WRs

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix multiple init when debugfs is disabled If bt_debugfs is not created successfully, which happens if either CONFIG_DEBUG_FS or CONFIG_DEBUG_FS_ALLOW_ALL is unset, then iso_init() returns early and does not set iso_inited to true. This means that a subsequent call to iso_init() will result in duplicate calls to proto_register(), bt_sock_register(), etc. With CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, the duplicate call to proto_register() triggers this BUG(): list_add double add: new=ffffffffc0b280d0, prev=ffffffffbab56250, next=ffffffffc0b280d0. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:35! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 887 Comm: bluetoothd Not tainted 6.10.11-1-ao-desktop #1 RIP: 0010:__list_add_valid_or_report+0x9a/0xa0 ... __list_add_valid_or_report+0x9a/0xa0 proto_register+0x2b5/0x340 iso_init+0x23/0x150 [bluetooth] set_iso_socket_func+0x68/0x1b0 [bluetooth] kmem_cache_free+0x308/0x330 hci_sock_sendmsg+0x990/0x9e0 [bluetooth] __sock_sendmsg+0x7b/0x80 sock_write_iter+0x9a/0x110 do_iter_readv_writev+0x11d/0x220 vfs_writev+0x180/0x3e0 do_writev+0xca/0x100 ... This change removes the early return. The check for iso_debugfs being NULL was unnecessary, it is always NULL when iso_inited is false.

In the Linux kernel, the following vulnerability has been resolved: sock: redo the psock vs ULP protection check Commit 8a59f9d1e3d4 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()") has moved the inet_csk_has_ulp(sk) check from sk_psock_init() to the new tcp_bpf_update_proto() function. I'm guessing that this was done to allow creating psocks for non-inet sockets. Unfortunately the destruction path for psock includes the ULP unwind, so we need to fail the sk_psock_init() itself. Otherwise if ULP is already present we'll notice that later, and call tcp_update_ulp() with the sk_proto of the ULP itself, which will most likely result in the ULP looping its callbacks.

In the Linux kernel, the following vulnerability has been resolved: net: bgmac: Fix a BUG triggered by wrong bytes_compl On one of our machines we got: kernel BUG at lib/dynamic_queue_limits.c:27! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM CPU: 0 PID: 1166 Comm: irq/41-bgmac Tainted: G W O 4.14.275-rt132 #1 Hardware name: BRCM XGS iProc task: ee3415c0 task.stack: ee32a000 PC is at dql_completed+0x168/0x178 LR is at bgmac_poll+0x18c/0x6d8 pc : [<c03b9430>] lr : [<c04b5a18>] psr: 800a0313 sp : ee32be14 ip : 000005ea fp : 00000bd4 r10: ee558500 r9 : c0116298 r8 : 00000002 r7 : 00000000 r6 : ef128810 r5 : 01993267 r4 : 01993851 r3 : ee558000 r2 : 000070e1 r1 : 00000bd4 r0 : ee52c180 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 12c5387d Table: 8e88c04a DAC: 00000051 Process irq/41-bgmac (pid: 1166, stack limit = 0xee32a210) Stack: (0xee32be14 to 0xee32c000) be00: ee558520 ee52c100 ef128810 be20: 00000000 00000002 c0116298 c04b5a18 00000000 c0a0c8c4 c0951780 00000040 be40: c0701780 ee558500 ee55d520 ef05b340 ef6f9780 ee558520 00000001 00000040 be60: ffffe000 c0a56878 ef6fa040 c0952040 0000012c c0528744 ef6f97b0 fffcfb6a be80: c0a04104 2eda8000 c0a0c4ec c0a0d368 ee32bf44 c0153534 ee32be98 ee32be98 bea0: ee32bea0 ee32bea0 ee32bea8 ee32bea8 00000000 c01462e4 ffffe000 ef6f22a8 bec0: ffffe000 00000008 ee32bee4 c0147430 ffffe000 c094a2a8 00000003 ffffe000 bee0: c0a54528 00208040 0000000c c0a0c8c4 c0a65980 c0124d3c 00000008 ee558520 bf00: c094a23c c0a02080 00000000 c07a9910 ef136970 ef136970 ee30a440 ef136900 bf20: ee30a440 00000001 ef136900 ee30a440 c016d990 00000000 c0108db0 c012500c bf40: ef136900 c016da14 ee30a464 ffffe000 00000001 c016dd14 00000000 c016db28 bf60: ffffe000 ee21a080 ee30a400 00000000 ee32a000 ee30a440 c016dbfc ee25fd70 bf80: ee21a09c c013edcc ee32a000 ee30a400 c013ec7c 00000000 00000000 00000000 bfa0: 00000000 00000000 00000000 c0108470 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c03b9430>] (dql_completed) from [<c04b5a18>] (bgmac_poll+0x18c/0x6d8) [<c04b5a18>] (bgmac_poll) from [<c0528744>] (net_rx_action+0x1c4/0x494) [<c0528744>] (net_rx_action) from [<c0124d3c>] (do_current_softirqs+0x1ec/0x43c) [<c0124d3c>] (do_current_softirqs) from [<c012500c>] (__local_bh_enable+0x80/0x98) [<c012500c>] (__local_bh_enable) from [<c016da14>] (irq_forced_thread_fn+0x84/0x98) [<c016da14>] (irq_forced_thread_fn) from [<c016dd14>] (irq_thread+0x118/0x1c0) [<c016dd14>] (irq_thread) from [<c013edcc>] (kthread+0x150/0x158) [<c013edcc>] (kthread) from [<c0108470>] (ret_from_fork+0x14/0x24) Code: a83f15e0 0200001a 0630a0e1 c3ffffea (f201f0e7) The issue seems similar to commit 90b3b339364c ("net: hisilicon: Fix a BUG trigered by wrong bytes_compl") and potentially introduced by commit b38c83dd0866 ("bgmac: simplify tx ring index handling"). If there is an RX interrupt between setting ring->end and netdev_sent_queue() we can hit the BUG_ON as bgmac_dma_tx_free() can miscalculate the queue size while called from bgmac_poll(). The machine which triggered the BUG runs a v4.14 RT kernel - but the issue seems present in mainline too.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix lockdep splat in in6_dump_addrs() As reported by syzbot, we should not use rcu_dereference() when rcu_read_lock() is not held. WARNING: suspicious RCU usage 5.19.0-rc2-syzkaller #0 Not tainted net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor326/3617: #0: ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223 stack backtrace: CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175 inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300 netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275 __netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380 netlink_dump_start include/linux/netlink.h:245 [inline] rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: MIPS: smp: fill in sibling and core maps earlier After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle), 2-core 2-thread-per-core interAptiv (CPS-driven) started emitting the following: [ 0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi)) [ 0.048183] ------------[ cut here ]------------ [ 0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240 [ 0.048220] Modules linked in: [ 0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35 b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f [ 0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1 [ 0.048278] 830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000 [ 0.048307] 00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000 [ 0.048334] 00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34 [ 0.048361] 817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933 [ 0.048389] ... [ 0.048396] Call Trace: [ 0.048399] [<8105a7bc>] show_stack+0x3c/0x140 [ 0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80 [ 0.048440] [<8108b5c0>] __warn+0xc0/0xf4 [ 0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c [ 0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240 [ 0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80 [ 0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140 [ 0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140 [ 0.048523] [<8106593c>] start_secondary+0xbc/0x280 [ 0.048539] [ 0.048543] ---[ end trace 0000000000000000 ]--- [ 0.048636] Synchronize counters for CPU 1: done. ...for each but CPU 0/boot. Basic debug printks right before the mentioned line say: [ 0.048170] CPU: 1, smt_mask: So smt_mask, which is sibling mask obviously, is empty when entering the function. This is critical, as sched_core_cpu_starting() calculates core-scheduling parameters only once per CPU start, and it's crucial to have all the parameters filled in at that moment (at least it uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on MIPS). A bit of debugging led me to that set_cpu_sibling_map() performing the actual map calculation, was being invocated after notify_cpu_start(), and exactly the latter function starts CPU HP callback round (sched_core_cpu_starting() is basically a CPU HP callback). While the flow is same on ARM64 (maps after the notifier, although before calling set_cpu_online()), x86 started calculating sibling maps earlier than starting the CPU HP callbacks in Linux 4.14 (see [0] for the reference). Neither me nor my brief tests couldn't find any potential caveats in calculating the maps right after performing delay calibration, but the WARN splat is now gone. The very same debug prints now yield exactly what I expected from them: [ 0.048433] CPU: 1, smt_mask: 0-1 [0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef