In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix race on per-CQ variable napi work_done After calling napi_complete_done(), the NAPIF_STATE_SCHED bit may be cleared, and another CPU can start napi thread and access per-CQ variable, cq->work_done. If the other thread (for example, from busy_poll) sets it to a value >= budget, this thread will continue to run when it should stop, and cause memory corruption and panic. To fix this issue, save the per-CQ work_done variable in a local variable before napi_complete_done(), so it won't be corrupted by a possible concurrent thread after napi_complete_done(). Also, add a flag bit to advertise to the NIC firmware: the NAPI work_done variable race is fixed, so the driver is able to reliably support features like busy_poll.
In the Linux kernel, the following vulnerability has been resolved: nvme: fix SRCU protection of nvme_ns_head list Walking the nvme_ns_head siblings list is protected by the head's srcu in nvme_ns_head_submit_bio() but not nvme_mpath_revalidate_paths(). Removing namespaces from the list also fails to synchronize the srcu. Concurrent scan work can therefore cause use-after-frees. Hold the head's srcu lock in nvme_mpath_revalidate_paths() and synchronize with the srcu, not the global RCU, in nvme_ns_remove(). Observed the following panic when making NVMe/RDMA connections with native multipath on the Rocky Linux 8.6 kernel (it seems the upstream kernel has the same race condition). Disassembly shows the faulting instruction is cmp 0x50(%rdx),%rcx; computing capacity != get_capacity(ns->disk). Address 0x50 is dereferenced because ns->disk is NULL. The NULL disk appears to be the result of concurrent scan work freeing the namespace (note the log line in the middle of the panic). [37314.206036] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [37314.206036] nvme0n3: detected capacity change from 0 to 11811160064 [37314.299753] PGD 0 P4D 0 [37314.299756] Oops: 0000 [#1] SMP PTI [37314.299759] CPU: 29 PID: 322046 Comm: kworker/u98:3 Kdump: loaded Tainted: G W X --------- - - 4.18.0-372.32.1.el8test86.x86_64 #1 [37314.299762] Hardware name: Dell Inc. PowerEdge R720/0JP31P, BIOS 2.7.0 05/23/2018 [37314.299763] Workqueue: nvme-wq nvme_scan_work [nvme_core] [37314.299783] RIP: 0010:nvme_mpath_revalidate_paths+0x26/0xb0 [nvme_core] [37314.299790] Code: 1f 44 00 00 66 66 66 66 90 55 53 48 8b 5f 50 48 8b 83 c8 c9 00 00 48 8b 13 48 8b 48 50 48 39 d3 74 20 48 8d 42 d0 48 8b 50 20 <48> 3b 4a 50 74 05 f0 80 60 70 ef 48 8b 50 30 48 8d 42 d0 48 39 d3 [37315.058803] RSP: 0018:ffffabe28f913d10 EFLAGS: 00010202 [37315.121316] RAX: ffff927a077da800 RBX: ffff92991dd70000 RCX: 0000000001600000 [37315.206704] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff92991b719800 [37315.292106] RBP: ffff929a6b70c000 R08: 000000010234cd4a R09: c0000000ffff7fff [37315.377501] R10: 0000000000000001 R11: ffffabe28f913a30 R12: 0000000000000000 [37315.462889] R13: ffff92992716600c R14: ffff929964e6e030 R15: ffff92991dd70000 [37315.548286] FS: 0000000000000000(0000) GS:ffff92b87fb80000(0000) knlGS:0000000000000000 [37315.645111] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [37315.713871] CR2: 0000000000000050 CR3: 0000002208810006 CR4: 00000000000606e0 [37315.799267] Call Trace: [37315.828515] nvme_update_ns_info+0x1ac/0x250 [nvme_core] [37315.892075] nvme_validate_or_alloc_ns+0x2ff/0xa00 [nvme_core] [37315.961871] ? __blk_mq_free_request+0x6b/0x90 [37316.015021] nvme_scan_work+0x151/0x240 [nvme_core] [37316.073371] process_one_work+0x1a7/0x360 [37316.121318] ? create_worker+0x1a0/0x1a0 [37316.168227] worker_thread+0x30/0x390 [37316.212024] ? create_worker+0x1a0/0x1a0 [37316.258939] kthread+0x10a/0x120 [37316.297557] ? set_kthread_struct+0x50/0x50 [37316.347590] ret_from_fork+0x35/0x40 [37316.390360] Modules linked in: nvme_rdma nvme_tcp(X) nvme_fabrics nvme_core netconsole iscsi_tcp libiscsi_tcp dm_queue_length dm_service_time nf_conntrack_netlink br_netfilter bridge stp llc overlay nft_chain_nat ipt_MASQUERADE nf_nat xt_addrtype xt_CT nft_counter xt_state xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment xt_multiport nft_compat nf_tables libcrc32c nfnetlink dm_multipath tg3 rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm intel_rapl_msr iTCO_wdt iTCO_vendor_support dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ipmi_ssif kvm irqbypass crct10dif_pclmul crc32_pclmul mlx5_ib ghash_clmulni_intel ib_uverbs rapl intel_cstate intel_uncore ib_core ipmi_si joydev mei_me pcspkr ipmi_devintf mei lpc_ich wmi ipmi_msghandler acpi_power_meter ex ---truncated---
In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix GEM handle creation UAF Userspace can guess the handle value and try to race GEM object creation with handle close, resulting in a use-after-free if we dereference the object after dropping the handle's reference. For that reason, dropping the handle's reference must be done *after* we are done dereferencing the object.
In the Linux kernel, the following vulnerability has been resolved: char: tpm: Protect tpm_pm_suspend with locks Currently tpm transactions are executed unconditionally in tpm_pm_suspend() function, which may lead to races with other tpm accessors in the system. Specifically, the hw_random tpm driver makes use of tpm_get_random(), and this function is called in a loop from a kthread, which means it's not frozen alongside userspace, and so can race with the work done during system suspend: tpm tpm0: tpm_transmit: tpm_recv: error -52 tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Call Trace: tpm_tis_status.cold+0x19/0x20 tpm_transmit+0x13b/0x390 tpm_transmit_cmd+0x20/0x80 tpm1_pm_suspend+0xa6/0x110 tpm_pm_suspend+0x53/0x80 __pnp_bus_suspend+0x35/0xe0 __device_suspend+0x10f/0x350 Fix this by calling tpm_try_get_ops(), which itself is a wrapper around tpm_chip_start(), but takes the appropriate mutex. [Jason: reworked commit message, added metadata]
In the Linux kernel, the following vulnerability has been resolved: net/smc: Transitional solution for clcsock race issue We encountered a crash in smc_setsockopt() and it is caused by accessing smc->clcsock after clcsock was released. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 50309 Comm: nginx Kdump: loaded Tainted: G E 5.16.0-rc4+ #53 RIP: 0010:smc_setsockopt+0x59/0x280 [smc] Call Trace: <TASK> __sys_setsockopt+0xfc/0x190 __x64_sys_setsockopt+0x20/0x30 do_syscall_64+0x34/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f16ba83918e </TASK> This patch tries to fix it by holding clcsock_release_lock and checking whether clcsock has already been released before access. In case that a crash of the same reason happens in smc_getsockopt() or smc_switch_to_fallback(), this patch also checkes smc->clcsock in them too. And the caller of smc_switch_to_fallback() will identify whether fallback succeeds according to the return value.
In the Linux kernel, the following vulnerability has been resolved: userfaultfd: fix checks for huge PMDs Patch series "userfaultfd: fix races around pmd_trans_huge() check", v2. The pmd_trans_huge() code in mfill_atomic() is wrong in three different ways depending on kernel version: 1. The pmd_trans_huge() check is racy and can lead to a BUG_ON() (if you hit the right two race windows) - I've tested this in a kernel build with some extra mdelay() calls. See the commit message for a description of the race scenario. On older kernels (before 6.5), I think the same bug can even theoretically lead to accessing transhuge page contents as a page table if you hit the right 5 narrow race windows (I haven't tested this case). 2. As pointed out by Qi Zheng, pmd_trans_huge() is not sufficient for detecting PMDs that don't point to page tables. On older kernels (before 6.5), you'd just have to win a single fairly wide race to hit this. I've tested this on 6.1 stable by racing migration (with a mdelay() patched into try_to_migrate()) against UFFDIO_ZEROPAGE - on my x86 VM, that causes a kernel oops in ptlock_ptr(). 3. On newer kernels (>=6.5), for shmem mappings, khugepaged is allowed to yank page tables out from under us (though I haven't tested that), so I think the BUG_ON() checks in mfill_atomic() are just wrong. I decided to write two separate fixes for these (one fix for bugs 1+2, one fix for bug 3), so that the first fix can be backported to kernels affected by bugs 1+2. This patch (of 2): This fixes two issues. I discovered that the following race can occur: mfill_atomic other thread ============ ============ <zap PMD> pmdp_get_lockless() [reads none pmd] <bail if trans_huge> <if none:> <pagefault creates transhuge zeropage> __pte_alloc [no-op] <zap PMD> <bail if pmd_trans_huge(*dst_pmd)> BUG_ON(pmd_none(*dst_pmd)) I have experimentally verified this in a kernel with extra mdelay() calls; the BUG_ON(pmd_none(*dst_pmd)) triggers. On kernels newer than commit 0d940a9b270b ("mm/pgtable: allow pte_offset_map[_lock]() to fail"), this can't lead to anything worse than a BUG_ON(), since the page table access helpers are actually designed to deal with page tables concurrently disappearing; but on older kernels (<=6.4), I think we could probably theoretically race past the two BUG_ON() checks and end up treating a hugepage as a page table. The second issue is that, as Qi Zheng pointed out, there are other types of huge PMDs that pmd_trans_huge() can't catch: devmap PMDs and swap PMDs (in particular, migration PMDs). On <=6.4, this is worse than the first issue: If mfill_atomic() runs on a PMD that contains a migration entry (which just requires winning a single, fairly wide race), it will pass the PMD to pte_offset_map_lock(), which assumes that the PMD points to a page table. Breakage follows: First, the kernel tries to take the PTE lock (which will crash or maybe worse if there is no "struct page" for the address bits in the migration entry PMD - I think at least on X86 there usually is no corresponding "struct page" thanks to the PTE inversion mitigation, amd64 looks different). If that didn't crash, the kernel would next try to write a PTE into what it wrongly thinks is a page table. As part of fixing these issues, get rid of the check for pmd_trans_huge() before __pte_alloc() - that's redundant, we're going to have to check for that after the __pte_alloc() anyway. Backport note: pmdp_get_lockless() is pmd_read_atomic() in older kernels.
In the Linux kernel, the following vulnerability has been resolved: fgraph: Add READ_ONCE() when accessing fgraph_array[] In __ftrace_return_to_handler(), a loop iterates over the fgraph_array[] elements, which are fgraph_ops. The loop checks if an element is a fgraph_stub to prevent using a fgraph_stub afterward. However, if the compiler reloads fgraph_array[] after this check, it might race with an update to fgraph_array[] that introduces a fgraph_stub. This could result in the stub being processed, but the stub contains a null "func_hash" field, leading to a NULL pointer dereference. To ensure that the gops compared against the fgraph_stub matches the gops processed later, add a READ_ONCE(). A similar patch appears in commit 63a8dfb ("function_graph: Add READ_ONCE() when accessing fgraph_array[]").
In the Linux kernel, the following vulnerability has been resolved: smb: Initialize cfid->tcon before performing network ops Avoid leaking a tcon ref when a lease break races with opening the cached directory. Processing the leak break might take a reference to the tcon in cached_dir_lease_break() and then fail to release the ref in cached_dir_offload_close, since cfid->tcon is still NULL.
In the Linux kernel, the following vulnerability has been resolved: tracing: Have format file honor EVENT_FILE_FL_FREED When eventfs was introduced, special care had to be done to coordinate the freeing of the file meta data with the files that are exposed to user space. The file meta data would have a ref count that is set when the file is created and would be decremented and freed after the last user that opened the file closed it. When the file meta data was to be freed, it would set a flag (EVENT_FILE_FL_FREED) to denote that the file is freed, and any new references made (like new opens or reads) would fail as it is marked freed. This allowed other meta data to be freed after this flag was set (under the event_mutex). All the files that were dynamically created in the events directory had a pointer to the file meta data and would call event_release() when the last reference to the user space file was closed. This would be the time that it is safe to free the file meta data. A shortcut was made for the "format" file. It's i_private would point to the "call" entry directly and not point to the file's meta data. This is because all format files are the same for the same "call", so it was thought there was no reason to differentiate them. The other files maintain state (like the "enable", "trigger", etc). But this meant if the file were to disappear, the "format" file would be unaware of it. This caused a race that could be trigger via the user_events test (that would create dynamic events and free them), and running a loop that would read the user_events format files: In one console run: # cd tools/testing/selftests/user_events # while true; do ./ftrace_test; done And in another console run: # cd /sys/kernel/tracing/ # while true; do cat events/user_events/__test_event/format; done 2>/dev/null With KASAN memory checking, it would trigger a use-after-free bug report (which was a real bug). This was because the format file was not checking the file's meta data flag "EVENT_FILE_FL_FREED", so it would access the event that the file meta data pointed to after the event was freed. After inspection, there are other locations that were found to not check the EVENT_FILE_FL_FREED flag when accessing the trace_event_file. Add a new helper function: event_file_file() that will make sure that the event_mutex is held, and will return NULL if the trace_event_file has the EVENT_FILE_FL_FREED flag set. Have the first reference of the struct file pointer use event_file_file() and check for NULL. Later uses can still use the event_file_data() helper function if the event_mutex is still held and was not released since the event_file_file() call.
In the Linux kernel, the following vulnerability has been resolved: drm/bridge: sii902x: Fix probing race issue A null pointer dereference crash has been observed rarely on TI platforms using sii9022 bridge: [ 53.271356] sii902x_get_edid+0x34/0x70 [sii902x] [ 53.276066] sii902x_bridge_get_edid+0x14/0x20 [sii902x] [ 53.281381] drm_bridge_get_edid+0x20/0x34 [drm] [ 53.286305] drm_bridge_connector_get_modes+0x8c/0xcc [drm_kms_helper] [ 53.292955] drm_helper_probe_single_connector_modes+0x190/0x538 [drm_kms_helper] [ 53.300510] drm_client_modeset_probe+0x1f0/0xbd4 [drm] [ 53.305958] __drm_fb_helper_initial_config_and_unlock+0x50/0x510 [drm_kms_helper] [ 53.313611] drm_fb_helper_initial_config+0x48/0x58 [drm_kms_helper] [ 53.320039] drm_fbdev_dma_client_hotplug+0x84/0xd4 [drm_dma_helper] [ 53.326401] drm_client_register+0x5c/0xa0 [drm] [ 53.331216] drm_fbdev_dma_setup+0xc8/0x13c [drm_dma_helper] [ 53.336881] tidss_probe+0x128/0x264 [tidss] [ 53.341174] platform_probe+0x68/0xc4 [ 53.344841] really_probe+0x188/0x3c4 [ 53.348501] __driver_probe_device+0x7c/0x16c [ 53.352854] driver_probe_device+0x3c/0x10c [ 53.357033] __device_attach_driver+0xbc/0x158 [ 53.361472] bus_for_each_drv+0x88/0xe8 [ 53.365303] __device_attach+0xa0/0x1b4 [ 53.369135] device_initial_probe+0x14/0x20 [ 53.373314] bus_probe_device+0xb0/0xb4 [ 53.377145] deferred_probe_work_func+0xcc/0x124 [ 53.381757] process_one_work+0x1f0/0x518 [ 53.385770] worker_thread+0x1e8/0x3dc [ 53.389519] kthread+0x11c/0x120 [ 53.392750] ret_from_fork+0x10/0x20 The issue here is as follows: - tidss probes, but is deferred as sii902x is still missing. - sii902x starts probing and enters sii902x_init(). - sii902x calls drm_bridge_add(). Now the sii902x bridge is ready from DRM's perspective. - sii902x calls sii902x_audio_codec_init() and platform_device_register_data() - The registration of the audio platform device causes probing of the deferred devices. - tidss probes, which eventually causes sii902x_bridge_get_edid() to be called. - sii902x_bridge_get_edid() tries to use the i2c to read the edid. However, the sii902x driver has not set up the i2c part yet, leading to the crash. Fix this by moving the drm_bridge_add() to the end of the sii902x_init(), which is also at the very end of sii902x_probe().
In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: Wait unconditionally after issuing EndXfer command Currently all controller IP/revisions except DWC3_usb3 >= 310a wait 1ms unconditionally for ENDXFER completion when IOC is not set. This is because DWC_usb3 controller revisions >= 3.10a supports GUCTL2[14: Rst_actbitlater] bit which allows polling CMDACT bit to know whether ENDXFER command is completed. Consider a case where an IN request was queued, and parallelly soft_disconnect was called (due to ffs_epfile_release). This eventually calls stop_active_transfer with IOC cleared, hence send_gadget_ep_cmd() skips waiting for CMDACT cleared during EndXfer. For DWC3 controllers with revisions >= 310a, we don't forcefully wait for 1ms either, and we proceed by unmapping the requests. If ENDXFER didn't complete by this time, it leads to SMMU faults since the controller would still be accessing those requests. Fix this by ensuring ENDXFER completion by adding 1ms delay in __dwc3_stop_active_transfer() unconditionally.
In the Linux kernel, the following vulnerability has been resolved: exec: don't WARN for racy path_noexec check Both i_mode and noexec checks wrapped in WARN_ON stem from an artifact of the previous implementation. They used to legitimately check for the condition, but that got moved up in two commits: 633fb6ac3980 ("exec: move S_ISREG() check earlier") 0fd338b2d2cd ("exec: move path_noexec() check earlier") Instead of being removed said checks are WARN_ON'ed instead, which has some debug value. However, the spurious path_noexec check is racy, resulting in unwarranted warnings should someone race with setting the noexec flag. One can note there is more to perm-checking whether execve is allowed and none of the conditions are guaranteed to still hold after they were tested for. Additionally this does not validate whether the code path did any perm checking to begin with -- it will pass if the inode happens to be regular. Keep the redundant path_noexec() check even though it's mindless nonsense checking for guarantee that isn't given so drop the WARN. Reword the commentary and do small tidy ups while here. [brauner: keep redundant path_noexec() check]
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't allow a VMOVP on a dying VPE Kunkun Jiang reported that there is a small window of opportunity for userspace to force a change of affinity for a VPE while the VPE has already been unmapped, but the corresponding doorbell interrupt still visible in /proc/irq/. Plug the race by checking the value of vmapp_count, which tracks whether the VPE is mapped ot not, and returning an error in this case. This involves making vmapp_count common to both GICv4.1 and its v4.0 ancestor.
In the Linux kernel, the following vulnerability has been resolved: ext4: fix i_data_sem unlock order in ext4_ind_migrate() Fuzzing reports a possible deadlock in jbd2_log_wait_commit. This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require synchronous updates because the file descriptor is opened with O_SYNC. This can lead to the jbd2_journal_stop() function calling jbd2_might_wait_for_commit(), potentially causing a deadlock if the EXT4_IOC_MIGRATE call races with a write(2) system call. This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the jbd2_journal_stop function while i_data_sem is locked. This triggers lockdep because the jbd2_journal_start function might also lock the same jbd2_handle simultaneously. Found by Linux Verification Center (linuxtesting.org) with syzkaller. Rule: add
In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible race in __fib6_drop_pcpu_from() syzbot found a race in __fib6_drop_pcpu_from() [1] If compiler reads more than once (*ppcpu_rt), second read could read NULL, if another cpu clears the value in rt6_get_pcpu_route(). Add a READ_ONCE() to prevent this race. Also add rcu_read_lock()/rcu_read_unlock() because we rely on RCU protection while dereferencing pcpu_rt. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 7543 Comm: kworker/u8:17 Not tainted 6.10.0-rc1-syzkaller-00013-g2bfcfd584ff5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Workqueue: netns cleanup_net RIP: 0010:__fib6_drop_pcpu_from.part.0+0x10a/0x370 net/ipv6/ip6_fib.c:984 Code: f8 48 c1 e8 03 80 3c 28 00 0f 85 16 02 00 00 4d 8b 3f 4d 85 ff 74 31 e8 74 a7 fa f7 49 8d bf 90 00 00 00 48 89 f8 48 c1 e8 03 <80> 3c 28 00 0f 85 1e 02 00 00 49 8b 87 90 00 00 00 48 8b 0c 24 48 RSP: 0018:ffffc900040df070 EFLAGS: 00010206 RAX: 0000000000000012 RBX: 0000000000000001 RCX: ffffffff89932e16 RDX: ffff888049dd1e00 RSI: ffffffff89932d7c RDI: 0000000000000091 RBP: dffffc0000000000 R08: 0000000000000005 R09: 0000000000000007 R10: 0000000000000001 R11: 0000000000000006 R12: ffff88807fa080b8 R13: fffffbfff1a9a07d R14: ffffed100ff41022 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32c26000 CR3: 000000005d56e000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __fib6_drop_pcpu_from net/ipv6/ip6_fib.c:966 [inline] fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1027 [inline] fib6_purge_rt+0x7f2/0x9f0 net/ipv6/ip6_fib.c:1038 fib6_del_route net/ipv6/ip6_fib.c:1998 [inline] fib6_del+0xa70/0x17b0 net/ipv6/ip6_fib.c:2043 fib6_clean_node+0x426/0x5b0 net/ipv6/ip6_fib.c:2205 fib6_walk_continue+0x44f/0x8d0 net/ipv6/ip6_fib.c:2127 fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2175 fib6_clean_tree+0xd7/0x120 net/ipv6/ip6_fib.c:2255 __fib6_clean_all+0x100/0x2d0 net/ipv6/ip6_fib.c:2271 rt6_sync_down_dev net/ipv6/route.c:4906 [inline] rt6_disable_ip+0x7ed/0xa00 net/ipv6/route.c:4911 addrconf_ifdown.isra.0+0x117/0x1b40 net/ipv6/addrconf.c:3855 addrconf_notify+0x223/0x19e0 net/ipv6/addrconf.c:3778 notifier_call_chain+0xb9/0x410 kernel/notifier.c:93 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:1992 call_netdevice_notifiers_extack net/core/dev.c:2030 [inline] call_netdevice_notifiers net/core/dev.c:2044 [inline] dev_close_many+0x333/0x6a0 net/core/dev.c:1585 unregister_netdevice_many_notify+0x46d/0x19f0 net/core/dev.c:11193 unregister_netdevice_many net/core/dev.c:11276 [inline] default_device_exit_batch+0x85b/0xae0 net/core/dev.c:11759 ops_exit_list+0x128/0x180 net/core/net_namespace.c:178 cleanup_net+0x5b7/0xbf0 net/core/net_namespace.c:640 process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xf70 kernel/workqueue.c:3393 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
In the Linux kernel, the following vulnerability has been resolved: sock_map: fix a NULL pointer dereference in sock_map_link_update_prog() The following race condition could trigger a NULL pointer dereference: sock_map_link_detach(): sock_map_link_update_prog(): mutex_lock(&sockmap_mutex); ... sockmap_link->map = NULL; mutex_unlock(&sockmap_mutex); mutex_lock(&sockmap_mutex); ... sock_map_prog_link_lookup(sockmap_link->map); mutex_unlock(&sockmap_mutex); <continue> Fix it by adding a NULL pointer check. In this specific case, it makes no sense to update a link which is being released.
In the Linux kernel, the following vulnerability has been resolved: net: dsa: improve shutdown sequence Alexander Sverdlin presents 2 problems during shutdown with the lan9303 driver. One is specific to lan9303 and the other just happens to reproduce there. The first problem is that lan9303 is unique among DSA drivers in that it calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown, not remove): phy_state_machine() -> ... -> dsa_user_phy_read() -> ds->ops->phy_read() -> lan9303_phy_read() -> chip->ops->phy_read() -> lan9303_mdio_phy_read() -> dev_get_drvdata() But we never stop the phy_state_machine(), so it may continue to run after dsa_switch_shutdown(). Our common pattern in all DSA drivers is to set drvdata to NULL to suppress the remove() method that may come afterwards. But in this case it will result in an NPD. The second problem is that the way in which we set dp->conduit->dsa_ptr = NULL; is concurrent with receive packet processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL, but afterwards, rather than continuing to use that non-NULL value, dev->dsa_ptr is dereferenced again and again without NULL checks: dsa_conduit_find_user() and many other places. In between dereferences, there is no locking to ensure that what was valid once continues to be valid. Both problems have the common aspect that closing the conduit interface solves them. In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN event in dsa_user_netdevice_event() which closes user ports as well. dsa_port_disable_rt() calls phylink_stop(), which synchronously stops the phylink state machine, and ds->ops->phy_read() will thus no longer call into the driver after this point. In the second case, dev_close(conduit) should do this, as per Documentation/networking/driver.rst: | Quiescence | ---------- | | After the ndo_stop routine has been called, the hardware must | not receive or transmit any data. All in flight packets must | be aborted. If necessary, poll or wait for completion of | any reset commands. So it should be sufficient to ensure that later, when we zeroize conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call on this conduit. The addition of the netif_device_detach() function is to ensure that ioctls, rtnetlinks and ethtool requests on the user ports no longer propagate down to the driver - we're no longer prepared to handle them. The race condition actually did not exist when commit 0650bf52b31f ("net: dsa: be compatible with masters which unregister on shutdown") first introduced dsa_switch_shutdown(). It was created later, when we stopped unregistering the user interfaces from a bad spot, and we just replaced that sequence with a racy zeroization of conduit->dsa_ptr (one which doesn't ensure that the interfaces aren't up).
In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pmic_glink: Fix race during initialization As pointed out by Stephen Boyd it is possible that during initialization of the pmic_glink child drivers, the protection-domain notifiers fires, and the associated work is scheduled, before the client registration returns and as a result the local "client" pointer has been initialized. The outcome of this is a NULL pointer dereference as the "client" pointer is blindly dereferenced. Timeline provided by Stephen: CPU0 CPU1 ---- ---- ucsi->client = NULL; devm_pmic_glink_register_client() client->pdr_notify(client->priv, pg->client_state) pmic_glink_ucsi_pdr_notify() schedule_work(&ucsi->register_work) <schedule away> pmic_glink_ucsi_register() ucsi_register() pmic_glink_ucsi_read_version() pmic_glink_ucsi_read() pmic_glink_ucsi_read() pmic_glink_send(ucsi->client) <client is NULL BAD> ucsi->client = client // Too late! This code is identical across the altmode, battery manager and usci child drivers. Resolve this by splitting the allocation of the "client" object and the registration thereof into two operations. This only happens if the protection domain registry is populated at the time of registration, which by the introduction of commit '1ebcde047c54 ("soc: qcom: add pd-mapper implementation")' became much more likely.
In the Linux kernel, the following vulnerability has been resolved: ethtool: check device is present when getting link settings A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd7fb65 ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers.
In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix spruious data race in __flush_work() When flushing a work item for cancellation, __flush_work() knows that it exclusively owns the work item through its PENDING bit. 134874e2eee9 ("workqueue: Allow cancel_work_sync() and disable_work() from atomic contexts on BH work items") added a read of @work->data to determine whether to use busy wait for BH work items that are being canceled. While the read is safe when @from_cancel, @work->data was read before testing @from_cancel to simplify code structure: data = *work_data_bits(work); if (from_cancel && !WARN_ON_ONCE(data & WORK_STRUCT_PWQ) && (data & WORK_OFFQ_BH)) { While the read data was never used if !@from_cancel, this could trigger KCSAN data race detection spuriously: ================================================================== BUG: KCSAN: data-race in __flush_work / __flush_work write to 0xffff8881223aa3e8 of 8 bytes by task 3998 on cpu 0: instrument_write include/linux/instrumented.h:41 [inline] ___set_bit include/asm-generic/bitops/instrumented-non-atomic.h:28 [inline] insert_wq_barrier kernel/workqueue.c:3790 [inline] start_flush_work kernel/workqueue.c:4142 [inline] __flush_work+0x30b/0x570 kernel/workqueue.c:4178 flush_work kernel/workqueue.c:4229 [inline] ... read to 0xffff8881223aa3e8 of 8 bytes by task 50 on cpu 1: __flush_work+0x42a/0x570 kernel/workqueue.c:4188 flush_work kernel/workqueue.c:4229 [inline] flush_delayed_work+0x66/0x70 kernel/workqueue.c:4251 ... value changed: 0x0000000000400000 -> 0xffff88810006c00d Reorganize the code so that @from_cancel is tested before @work->data is accessed. The only problem is triggering KCSAN detection spuriously. This shouldn't need READ_ONCE() or other access qualifiers. No functional changes.
In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix ID 0 endp usage after multiple re-creations 'local_addr_used' and 'add_addr_accepted' are decremented for addresses not related to the initial subflow (ID0), because the source and destination addresses of the initial subflows are known from the beginning: they don't count as "additional local address being used" or "ADD_ADDR being accepted". It is then required not to increment them when the entrypoint used by the initial subflow is removed and re-added during a connection. Without this modification, this entrypoint cannot be removed and re-added more than once.
In the Linux kernel, the following vulnerability has been resolved: net/tcp: Disable TCP-AO static key after RCU grace period The lifetime of TCP-AO static_key is the same as the last tcp_ao_info. On the socket destruction tcp_ao_info ceases to be with RCU grace period, while tcp-ao static branch is currently deferred destructed. The static key definition is : DEFINE_STATIC_KEY_DEFERRED_FALSE(tcp_ao_needed, HZ); which means that if RCU grace period is delayed by more than a second and tcp_ao_needed is in the process of disablement, other CPUs may yet see tcp_ao_info which atent dead, but soon-to-be. And that breaks the assumption of static_key_fast_inc_not_disabled(). See the comment near the definition: > * The caller must make sure that the static key can't get disabled while > * in this function. It doesn't patch jump labels, only adds a user to > * an already enabled static key. Originally it was introduced in commit eb8c507296f6 ("jump_label: Prevent key->enabled int overflow"), which is needed for the atomic contexts, one of which would be the creation of a full socket from a request socket. In that atomic context, it's known by the presence of the key (md5/ao) that the static branch is already enabled. So, the ref counter for that static branch is just incremented instead of holding the proper mutex. static_key_fast_inc_not_disabled() is just a helper for such usage case. But it must not be used if the static branch could get disabled in parallel as it's not protected by jump_label_mutex and as a result, races with jump_label_update() implementation details. Happened on netdev test-bot[1], so not a theoretical issue: [] jump_label: Fatal kernel bug, unexpected op at tcp_inbound_hash+0x1a7/0x870 [ffffffffa8c4e9b7] (eb 50 0f 1f 44 != 66 90 0f 1f 00)) size:2 type:1 [] ------------[ cut here ]------------ [] kernel BUG at arch/x86/kernel/jump_label.c:73! [] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [] CPU: 3 PID: 243 Comm: kworker/3:3 Not tainted 6.10.0-virtme #1 [] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [] Workqueue: events jump_label_update_timeout [] RIP: 0010:__jump_label_patch+0x2f6/0x350 ... [] Call Trace: [] <TASK> [] arch_jump_label_transform_queue+0x6c/0x110 [] __jump_label_update+0xef/0x350 [] __static_key_slow_dec_cpuslocked.part.0+0x3c/0x60 [] jump_label_update_timeout+0x2c/0x40 [] process_one_work+0xe3b/0x1670 [] worker_thread+0x587/0xce0 [] kthread+0x28a/0x350 [] ret_from_fork+0x31/0x70 [] ret_from_fork_asm+0x1a/0x30 [] </TASK> [] Modules linked in: veth [] ---[ end trace 0000000000000000 ]--- [] RIP: 0010:__jump_label_patch+0x2f6/0x350 [1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao-dbg/results/696681/5-connect-deny-ipv6/stderr
A race condition was found in the Linux kernel's media/xc4000 device driver in xc4000 xc4000_get_frequency() function. This can result in return value overflow issue, possibly leading to malfunction or denial of service issue.
A race condition was found in the Linux kernel's bluetooth device driver in {min,max}_key_size_set() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue.
Integer signedness error in the btrfs_ioctl_space_info function in the Linux kernel 2.6.37 allows local users to cause a denial of service (heap-based buffer overflow) or possibly have unspecified other impact via a crafted slot value.
Race condition in the tty_ioctl function in drivers/tty/tty_io.c in the Linux kernel through 4.4.1 allows local users to obtain sensitive information from kernel memory or cause a denial of service (use-after-free and system crash) by making a TIOCGETD ioctl call during processing of a TIOCSETD ioctl call.
Race condition in the sandbox launcher implementation in Google Chrome before 11.0.696.57 on Linux allows remote attackers to cause a denial of service or possibly have unspecified other impact via unknown vectors.
Multiple race conditions in the ext4 filesystem implementation in the Linux kernel before 4.5 allow local users to cause a denial of service (disk corruption) by writing to a page that is associated with a different user's file after unsynchronized hole punching and page-fault handling.
A race condition was found in the Linux kernel's net/bluetooth in {conn,adv}_{min,max}_interval_set() function. This can result in I2cap connection or broadcast abnormality issue, possibly leading to denial of service.
Race condition in Google Chrome before 11.0.696.57 on Linux and Mac OS X allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors related to linked lists and a database.
Race condition in arch/x86/kvm/x86.c in the Linux kernel before 2.6.38 allows L2 guest OS users to cause a denial of service (L1 guest OS crash) via a crafted instruction that triggers an L2 emulation failure report, a similar issue to CVE-2014-7842.
net/sctp/sm_sideeffect.c in the Linux kernel before 4.3 does not properly manage the relationship between a lock and a socket, which allows local users to cause a denial of service (deadlock) via a crafted sctp_accept call.
A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function tst_timer of the file drivers/atm/idt77252.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. VDB-211934 is the identifier assigned to this vulnerability.
Race condition in the __exit_signal function in kernel/exit.c in the Linux kernel before 2.6.37-rc2 allows local users to cause a denial of service via vectors related to multithreaded exec, the use of a thread group leader in kernel/posix-cpu-timers.c, and the selection of a new thread group leader in the de_thread function in fs/exec.c.
In the Linux kernel, the following vulnerability has been resolved: riscv: fix race when vmap stack overflow Currently, when detecting vmap stack overflow, riscv firstly switches to the so called shadow stack, then use this shadow stack to call the get_overflow_stack() to get the overflow stack. However, there's a race here if two or more harts use the same shadow stack at the same time. To solve this race, we introduce spin_shadow_stack atomic var, which will be swap between its own address and 0 in atomic way, when the var is set, it means the shadow_stack is being used; when the var is cleared, it means the shadow_stack isn't being used. [Palmer: Add AQ to the swap, and also some comments.]
Race condition in the sctp_icmp_proto_unreachable function in net/sctp/input.c in Linux kernel 2.6.11-rc2 through 2.6.33 allows remote attackers to cause a denial of service (panic) via an ICMP unreachable message to a socket that is already locked by a user, which causes the socket to be freed and triggers list corruption, related to the sctp_wait_for_connect function.
A vulnerability, which was classified as problematic, was found in Linux Kernel. This affects the function tcp_getsockopt/tcp_setsockopt of the component TCP Handler. The manipulation leads to race condition. It is recommended to apply a patch to fix this issue. The identifier VDB-211089 was assigned to this vulnerability.
Race condition in the mounting process in vmware-mount in VMware Workstation 7.x before 7.1.2 build 301548 on Linux, VMware Player 3.1.x before 3.1.2 build 301548 on Linux, VMware Server 2.0.2 on Linux, and VMware Fusion 3.1.x before 3.1.2 build 332101 allows host OS users to gain privileges via vectors involving temporary files.
A vulnerability classified as critical was found in Linux Kernel. Affected by this vulnerability is the function l2cap_reassemble_sdu of the file net/bluetooth/l2cap_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211087.
Multiple race conditions in the Advanced Union Filesystem (aufs) aufs3-mmap.patch and aufs4-mmap.patch patches for the Linux kernel 3.x and 4.x allow local users to cause a denial of service (use-after-free and BUG) or possibly gain privileges via a (1) madvise or (2) msync system call, related to mm/madvise.c and mm/msync.c.
A vulnerability has been found in Linux Kernel and classified as problematic. This vulnerability affects the function kcm_tx_work of the file net/kcm/kcmsock.c of the component kcm. The manipulation leads to race condition. It is recommended to apply a patch to fix this issue. VDB-211018 is the identifier assigned to this vulnerability.
A flaw use-after-free in function sco_sock_sendmsg() of the Linux kernel HCI subsystem was found in the way user calls ioct UFFDIO_REGISTER or other way triggers race condition of the call sco_conn_del() together with the call sco_sock_sendmsg() with the expected controllable faulting memory page. A privileged local user could use this flaw to crash the system or escalate their privileges on the system.
nbd_add_socket in drivers/block/nbd.c in the Linux kernel through 5.10.12 has an ndb_queue_rq use-after-free that could be triggered by local attackers (with access to the nbd device) via an I/O request at a certain point during device setup, aka CID-b98e762e3d71.
The keyctl_read_key function in security/keys/keyctl.c in the Linux kernel before 4.3.4 does not properly use a semaphore, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via a crafted application that leverages a race condition between keyctl_revoke and keyctl_read calls.
Race condition in the hvc_close function in drivers/char/hvc_console.c in the Linux kernel before 2.6.34 allows local users to cause a denial of service or possibly have unspecified other impact by closing a Hypervisor Virtual Console device, related to the hvc_open and hvc_remove functions.
Race condition in the find_keyring_by_name function in security/keys/keyring.c in the Linux kernel 2.6.34-rc5 and earlier allows local users to cause a denial of service (memory corruption and system crash) or possibly have unspecified other impact via keyctl session commands that trigger access to a dead keyring that is undergoing deletion by the key_cleanup function.
Race condition in the mac80211 subsystem in the Linux kernel before 2.6.32-rc8-next-20091201 allows remote attackers to cause a denial of service (system crash) via a Delete Block ACK (aka DELBA) packet that triggers a certain state change in the absence of an aggregation session.
Multiple race conditions in fs/pipe.c in the Linux kernel before 2.6.32-rc6 allow local users to cause a denial of service (NULL pointer dereference and system crash) or gain privileges by attempting to open an anonymous pipe via a /proc/*/fd/ pathname.
A race condition was found in the Linux kernel's IP framework for transforming packets (XFRM subsystem) when multiple calls to xfrm_probe_algs occurred simultaneously. This flaw could allow a local attacker to potentially trigger an out-of-bounds write or leak kernel heap memory by performing an out-of-bounds read and copying it into a socket.
jbd2_journal_wait_updates in fs/jbd2/transaction.c in the Linux kernel before 5.17.1 has a use-after-free caused by a transaction_t race condition.