In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix memory leak of struct clip_vcc. ioctl(ATMARP_MKIP) allocates struct clip_vcc and set it to vcc->user_back. The code assumes that vcc_destroy_socket() passes NULL skb to vcc->push() when the socket is close()d, and then clip_push() frees clip_vcc. However, ioctl(ATMARPD_CTRL) sets NULL to vcc->push() in atm_init_atmarp(), resulting in memory leak. Let's serialise two ioctl() by lock_sock() and check vcc->push() in atm_init_atmarp() to prevent memleak.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix a fence leak in submit error path In error paths, we could unref the submit without calling drm_sched_entity_push_job(), so msm_job_free() will never get called. Since drm_sched_job_cleanup() will NULL out the s_fence, we can use that to detect this case. Patchwork: https://patchwork.freedesktop.org/patch/653584/

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix kmemleak warning for percpu hashmap Vlad Poenaru reported the following kmemleak issue: unreferenced object 0x606fd7c44ac8 (size 32): backtrace (crc 0): pcpu_alloc_noprof+0x730/0xeb0 bpf_map_alloc_percpu+0x69/0xc0 prealloc_init+0x9d/0x1b0 htab_map_alloc+0x363/0x510 map_create+0x215/0x3a0 __sys_bpf+0x16b/0x3e0 __x64_sys_bpf+0x18/0x20 do_syscall_64+0x7b/0x150 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Further investigation shows the reason is due to not 8-byte aligned store of percpu pointer in htab_elem_set_ptr(): *(void __percpu **)(l->key + key_size) = pptr; Note that the whole htab_elem alignment is 8 (for x86_64). If the key_size is 4, that means pptr is stored in a location which is 4 byte aligned but not 8 byte aligned. In mm/kmemleak.c, scan_block() scans the memory based on 8 byte stride, so it won't detect above pptr, hence reporting the memory leak. In htab_map_alloc(), we already have htab->elem_size = sizeof(struct htab_elem) + round_up(htab->map.key_size, 8); if (percpu) htab->elem_size += sizeof(void *); else htab->elem_size += round_up(htab->map.value_size, 8); So storing pptr with 8-byte alignment won't cause any problem and can fix kmemleak too. The issue can be reproduced with bpf selftest as well: 1. Enable CONFIG_DEBUG_KMEMLEAK config 2. Add a getchar() before skel destroy in test_hash_map() in prog_tests/for_each.c. The purpose is to keep map available so kmemleak can be detected. 3. run './test_progs -t for_each/hash_map &' and a kmemleak should be reported.

In the Linux kernel, the following vulnerability has been resolved: media: imagination: fix a potential memory leak in e5010_probe() Add video_device_release() to release the memory allocated by video_device_alloc() if something goes wrong.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: Use devm_kstrdup() to avoid memleak. sof_pdata->tplg_filename can have address allocated by kstrdup() and can be overwritten. Memory leak was detected with kmemleak: unreferenced object 0xffff88812391ff60 (size 16): comm "kworker/4:1", pid 161, jiffies 4294802931 hex dump (first 16 bytes): 73 6f 66 2d 68 64 61 2d 67 65 6e 65 72 69 63 00 sof-hda-generic. backtrace (crc 4bf1675c): __kmalloc_node_track_caller_noprof+0x49c/0x6b0 kstrdup+0x46/0xc0 hda_machine_select.cold+0x1de/0x12cf [snd_sof_intel_hda_generic] sof_init_environment+0x16f/0xb50 [snd_sof] sof_probe_continue+0x45/0x7c0 [snd_sof] sof_probe_work+0x1e/0x40 [snd_sof] process_one_work+0x894/0x14b0 worker_thread+0x5e5/0xfb0 kthread+0x39d/0x760 ret_from_fork+0x31/0x70 ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Add job to pending list if the reset was skipped When a CL/CSD job times out, we check if the GPU has made any progress since the last timeout. If so, instead of resetting the hardware, we skip the reset and let the timer get rearmed. This gives long-running jobs a chance to complete. However, when `timedout_job()` is called, the job in question is removed from the pending list, which means it won't be automatically freed through `free_job()`. Consequently, when we skip the reset and keep the job running, the job won't be freed when it finally completes. This situation leads to a memory leak, as exposed in [1] and [2]. Similarly to commit 704d3d60fec4 ("drm/etnaviv: don't block scheduler when GPU is still active"), this patch ensures the job is put back on the pending list when extending the timeout.

In the Linux kernel, the following vulnerability has been resolved: virtio-net: free xsk_buffs on error in virtnet_xsk_pool_enable() The selftests added to our CI by Bui Quang Minh recently reveals that there is a mem leak on the error path of virtnet_xsk_pool_enable(): unreferenced object 0xffff88800a68a000 (size 2048): comm "xdp_helper", pid 318, jiffies 4294692778 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): __kvmalloc_node_noprof+0x402/0x570 virtnet_xsk_pool_enable+0x293/0x6a0 (drivers/net/virtio_net.c:5882) xp_assign_dev+0x369/0x670 (net/xdp/xsk_buff_pool.c:226) xsk_bind+0x6a5/0x1ae0 __sys_bind+0x15e/0x230 __x64_sys_bind+0x72/0xb0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix memory leak due to multiple rx_stats allocation rx_stats for each arsta is allocated when adding a station. arsta->rx_stats will be freed when a station is removed. Redundant allocations are occurring when the same station is added multiple times. This causes ath12k_mac_station_add() to be called multiple times, and rx_stats is allocated each time. As a result there is memory leaks. Prevent multiple allocations of rx_stats when ath12k_mac_station_add() is called repeatedly by checking if rx_stats is already allocated before allocating again. Allocate arsta->rx_stats if arsta->rx_stats is NULL respectively. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: fix a potential crash on gso_skb handling SFQ has an assumption of always being able to queue at least one packet. However, after the blamed commit, sch->q.len can be inflated by packets in sch->gso_skb, and an enqueue() on an empty SFQ qdisc can be followed by an immediate drop. Fix sfq_drop() to properly clear q->tail in this situation. ip netns add lb ip link add dev to-lb type veth peer name in-lb netns lb ethtool -K to-lb tso off # force qdisc to requeue gso_skb ip netns exec lb ethtool -K in-lb gro on # enable NAPI ip link set dev to-lb up ip -netns lb link set dev in-lb up ip addr add dev to-lb 192.168.20.1/24 ip -netns lb addr add dev in-lb 192.168.20.2/24 tc qdisc replace dev to-lb root sfq limit 100 ip netns exec lb netserver netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 &

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix memory leak in ath12k_pci_remove() Kmemleak reported this error: unreferenced object 0xffff1c165cec3060 (size 32): comm "insmod", pid 560, jiffies 4296964570 (age 235.596s) backtrace: [<000000005434db68>] __kmem_cache_alloc_node+0x1f4/0x2c0 [<000000001203b155>] kmalloc_trace+0x40/0x88 [<0000000028adc9c8>] _request_firmware+0xb8/0x608 [<00000000cad1aef7>] firmware_request_nowarn+0x50/0x80 [<000000005011a682>] local_pci_probe+0x48/0xd0 [<00000000077cd295>] pci_device_probe+0xb4/0x200 [<0000000087184c94>] really_probe+0x150/0x2c0 The firmware memory was allocated in ath12k_pci_probe(), but not freed in ath12k_pci_remove() in case ATH12K_FLAG_QMI_FAIL bit is set. So call ath12k_fw_unmap() to free the memory. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.2.0-02280-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: net: ngbe: fix memory leak in ngbe_probe() error path When ngbe_sw_init() is called, memory is allocated for wx->rss_key in wx_init_rss_key(). However, in ngbe_probe() function, the subsequent error paths after ngbe_sw_init() don't free the rss_key. Fix that by freeing it in error path along with wx->mac_table. Also change the label to which execution jumps when ngbe_sw_init() fails, because otherwise, it could lead to a double free for rss_key, when the mac_table allocation fails in wx_sw_init().

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Remove skb secpath if xfrm state is not found Hardware returns a unique identifier for a decrypted packet's xfrm state, this state is looked up in an xarray. However, the state might have been freed by the time of this lookup. Currently, if the state is not found, only a counter is incremented. The secpath (sp) extension on the skb is not removed, resulting in sp->len becoming 0. Subsequently, functions like __xfrm_policy_check() attempt to access fields such as xfrm_input_state(skb)->xso.type (which dereferences sp->xvec[sp->len - 1]) without first validating sp->len. This leads to a crash when dereferencing an invalid state pointer. This patch prevents the crash by explicitly removing the secpath extension from the skb if the xfrm state is not found after hardware decryption. This ensures downstream functions do not operate on a zero-length secpath. BUG: unable to handle page fault for address: ffffffff000002c8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 282e067 P4D 282e067 PUD 0 Oops: Oops: 0000 [#1] SMP CPU: 12 UID: 0 PID: 0 Comm: swapper/12 Not tainted 6.15.0-rc7_for_upstream_min_debug_2025_05_27_22_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:__xfrm_policy_check+0x61a/0xa30 Code: b6 77 7f 83 e6 02 74 14 4d 8b af d8 00 00 00 41 0f b6 45 05 c1 e0 03 48 98 49 01 c5 41 8b 45 00 83 e8 01 48 98 49 8b 44 c5 10 <0f> b6 80 c8 02 00 00 83 e0 0c 3c 04 0f 84 0c 02 00 00 31 ff 80 fa RSP: 0018:ffff88885fb04918 EFLAGS: 00010297 RAX: ffffffff00000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffffffff8311af80 R08: 0000000000000020 R09: 00000000c2eda353 R10: ffff88812be2bbc8 R11: 000000001faab533 R12: ffff88885fb049c8 R13: ffff88812be2bbc8 R14: 0000000000000000 R15: ffff88811896ae00 FS: 0000000000000000(0000) GS:ffff8888dca82000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff000002c8 CR3: 0000000243050002 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? try_to_wake_up+0x108/0x4c0 ? udp4_lib_lookup2+0xbe/0x150 ? udp_lib_lport_inuse+0x100/0x100 ? __udp4_lib_lookup+0x2b0/0x410 __xfrm_policy_check2.constprop.0+0x11e/0x130 udp_queue_rcv_one_skb+0x1d/0x530 udp_unicast_rcv_skb+0x76/0x90 __udp4_lib_rcv+0xa64/0xe90 ip_protocol_deliver_rcu+0x20/0x130 ip_local_deliver_finish+0x75/0xa0 ip_local_deliver+0xc1/0xd0 ? ip_protocol_deliver_rcu+0x130/0x130 ip_sublist_rcv+0x1f9/0x240 ? ip_rcv_finish_core+0x430/0x430 ip_list_rcv+0xfc/0x130 __netif_receive_skb_list_core+0x181/0x1e0 netif_receive_skb_list_internal+0x200/0x360 ? mlx5e_build_rx_skb+0x1bc/0xda0 [mlx5_core] gro_receive_skb+0xfd/0x210 mlx5e_handle_rx_cqe_mpwrq+0x141/0x280 [mlx5_core] mlx5e_poll_rx_cq+0xcc/0x8e0 [mlx5_core] ? mlx5e_handle_rx_dim+0x91/0xd0 [mlx5_core] mlx5e_napi_poll+0x114/0xab0 [mlx5_core] __napi_poll+0x25/0x170 net_rx_action+0x32d/0x3a0 ? mlx5_eq_comp_int+0x8d/0x280 [mlx5_core] ? notifier_call_chain+0x33/0xa0 handle_softirqs+0xda/0x250 irq_exit_rcu+0x6d/0xc0 common_interrupt+0x81/0xa0 </IRQ>

In the Linux kernel, the following vulnerability has been resolved: ACPICA: fix acpi operand cache leak in dswstate.c ACPICA commit 987a3b5cf7175916e2a4b6ea5b8e70f830dfe732 I found an ACPI cache leak in ACPI early termination and boot continuing case. When early termination occurs due to malicious ACPI table, Linux kernel terminates ACPI function and continues to boot process. While kernel terminates ACPI function, kmem_cache_destroy() reports Acpi-Operand cache leak. Boot log of ACPI operand cache leak is as follows: >[ 0.585957] ACPI: Added _OSI(Module Device) >[ 0.587218] ACPI: Added _OSI(Processor Device) >[ 0.588530] ACPI: Added _OSI(3.0 _SCP Extensions) >[ 0.589790] ACPI: Added _OSI(Processor Aggregator Device) >[ 0.591534] ACPI Error: Illegal I/O port address/length above 64K: C806E00000004002/0x2 (20170303/hwvalid-155) >[ 0.594351] ACPI Exception: AE_LIMIT, Unable to initialize fixed events (20170303/evevent-88) >[ 0.597858] ACPI: Unable to start the ACPI Interpreter >[ 0.599162] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) >[ 0.601836] kmem_cache_destroy Acpi-Operand: Slab cache still has objects >[ 0.603556] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc5 #26 >[ 0.605159] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 >[ 0.609177] Call Trace: >[ 0.610063] ? dump_stack+0x5c/0x81 >[ 0.611118] ? kmem_cache_destroy+0x1aa/0x1c0 >[ 0.612632] ? acpi_sleep_proc_init+0x27/0x27 >[ 0.613906] ? acpi_os_delete_cache+0xa/0x10 >[ 0.617986] ? acpi_ut_delete_caches+0x3f/0x7b >[ 0.619293] ? acpi_terminate+0xa/0x14 >[ 0.620394] ? acpi_init+0x2af/0x34f >[ 0.621616] ? __class_create+0x4c/0x80 >[ 0.623412] ? video_setup+0x7f/0x7f >[ 0.624585] ? acpi_sleep_proc_init+0x27/0x27 >[ 0.625861] ? do_one_initcall+0x4e/0x1a0 >[ 0.627513] ? kernel_init_freeable+0x19e/0x21f >[ 0.628972] ? rest_init+0x80/0x80 >[ 0.630043] ? kernel_init+0xa/0x100 >[ 0.631084] ? ret_from_fork+0x25/0x30 >[ 0.633343] vgaarb: loaded >[ 0.635036] EDAC MC: Ver: 3.0.0 >[ 0.638601] PCI: Probing PCI hardware >[ 0.639833] PCI host bridge to bus 0000:00 >[ 0.641031] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > ... Continue to boot and log is omitted ... I analyzed this memory leak in detail and found acpi_ds_obj_stack_pop_and_ delete() function miscalculated the top of the stack. acpi_ds_obj_stack_push() function uses walk_state->operand_index for start position of the top, but acpi_ds_obj_stack_pop_and_delete() function considers index 0 for it. Therefore, this causes acpi operand memory leak. This cache leak causes a security threat because an old kernel (<= 4.9) shows memory locations of kernel functions in stack dump. Some malicious users could use this information to neutralize kernel ASLR. I made a patch to fix ACPI operand cache leak.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix another leak in the submit error path put_unused_fd() doesn't free the installed file, if we've already done fd_install(). So we need to also free the sync_file. Patchwork: https://patchwork.freedesktop.org/patch/653583/

In the Linux kernel, the following vulnerability has been resolved: tipc: fix memory leak in tipc_link_xmit In case the backlog transmit queue for system-importance messages is overloaded, tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to memory leak and failure when a skb is allocated. This commit fixes this issue by purging the skb list before tipc_link_xmit() returns.

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix memory leak of bio integrity If nvmet receives commands with metadata there is a continuous memory leak of kmalloc-128 slab or more precisely bio->bi_integrity. Since commit bf4c89fc8797 ("block: don't call bio_uninit from bio_endio") each user of bio_init has to use bio_uninit as well. Otherwise the bio integrity is not getting free. Nvmet uses bio_init for inline bios. Uninit the inline bio to complete deallocation of integrity in bio.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: fix acpi parse and parseext cache leaks ACPICA commit 8829e70e1360c81e7a5a901b5d4f48330e021ea5 I'm Seunghun Han, and I work for National Security Research Institute of South Korea. I have been doing a research on ACPI and found an ACPI cache leak in ACPI early abort cases. Boot log of ACPI cache leak is as follows: [ 0.352414] ACPI: Added _OSI(Module Device) [ 0.353182] ACPI: Added _OSI(Processor Device) [ 0.353182] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.353182] ACPI: Added _OSI(Processor Aggregator Device) [ 0.356028] ACPI: Unable to start the ACPI Interpreter [ 0.356799] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) [ 0.360215] kmem_cache_destroy Acpi-State: Slab cache still has objects [ 0.360648] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #10 [ 0.361273] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.361873] Call Trace: [ 0.362243] ? dump_stack+0x5c/0x81 [ 0.362591] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.362944] ? acpi_sleep_proc_init+0x27/0x27 [ 0.363296] ? acpi_os_delete_cache+0xa/0x10 [ 0.363646] ? acpi_ut_delete_caches+0x6d/0x7b [ 0.364000] ? acpi_terminate+0xa/0x14 [ 0.364000] ? acpi_init+0x2af/0x34f [ 0.364000] ? __class_create+0x4c/0x80 [ 0.364000] ? video_setup+0x7f/0x7f [ 0.364000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.364000] ? do_one_initcall+0x4e/0x1a0 [ 0.364000] ? kernel_init_freeable+0x189/0x20a [ 0.364000] ? rest_init+0xc0/0xc0 [ 0.364000] ? kernel_init+0xa/0x100 [ 0.364000] ? ret_from_fork+0x25/0x30 I analyzed this memory leak in detail. I found that “Acpi-State” cache and “Acpi-Parse” cache were merged because the size of cache objects was same slab cache size. I finally found “Acpi-Parse” cache and “Acpi-parse_ext” cache were leaked using SLAB_NEVER_MERGE flag in kmem_cache_create() function. Real ACPI cache leak point is as follows: [ 0.360101] ACPI: Added _OSI(Module Device) [ 0.360101] ACPI: Added _OSI(Processor Device) [ 0.360101] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.361043] ACPI: Added _OSI(Processor Aggregator Device) [ 0.364016] ACPI: Unable to start the ACPI Interpreter [ 0.365061] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) [ 0.368174] kmem_cache_destroy Acpi-Parse: Slab cache still has objects [ 0.369332] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #8 [ 0.371256] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.372000] Call Trace: [ 0.372000] ? dump_stack+0x5c/0x81 [ 0.372000] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.372000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.372000] ? acpi_os_delete_cache+0xa/0x10 [ 0.372000] ? acpi_ut_delete_caches+0x56/0x7b [ 0.372000] ? acpi_terminate+0xa/0x14 [ 0.372000] ? acpi_init+0x2af/0x34f [ 0.372000] ? __class_create+0x4c/0x80 [ 0.372000] ? video_setup+0x7f/0x7f [ 0.372000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.372000] ? do_one_initcall+0x4e/0x1a0 [ 0.372000] ? kernel_init_freeable+0x189/0x20a [ 0.372000] ? rest_init+0xc0/0xc0 [ 0.372000] ? kernel_init+0xa/0x100 [ 0.372000] ? ret_from_fork+0x25/0x30 [ 0.388039] kmem_cache_destroy Acpi-parse_ext: Slab cache still has objects [ 0.389063] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #8 [ 0.390557] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.392000] Call Trace: [ 0.392000] ? dump_stack+0x5c/0x81 [ 0.392000] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.392000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.392000] ? acpi_os_delete_cache+0xa/0x10 [ 0.392000] ? acpi_ut_delete_caches+0x6d/0x7b [ 0.392000] ? acpi_terminate+0xa/0x14 [ 0.392000] ? acpi_init+0x2af/0x3 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mtd: spinand: fix memory leak of ECC engine conf Memory allocated for the ECC engine conf is not released during spinand cleanup. Below kmemleak trace is seen for this memory leak: unreferenced object 0xffffff80064f00e0 (size 8): comm "swapper/0", pid 1, jiffies 4294937458 hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace (crc 0): kmemleak_alloc+0x30/0x40 __kmalloc_cache_noprof+0x208/0x3c0 spinand_ondie_ecc_init_ctx+0x114/0x200 nand_ecc_init_ctx+0x70/0xa8 nanddev_ecc_engine_init+0xec/0x27c spinand_probe+0xa2c/0x1620 spi_mem_probe+0x130/0x21c spi_probe+0xf0/0x170 really_probe+0x17c/0x6e8 __driver_probe_device+0x17c/0x21c driver_probe_device+0x58/0x180 __device_attach_driver+0x15c/0x1f8 bus_for_each_drv+0xec/0x150 __device_attach+0x188/0x24c device_initial_probe+0x10/0x20 bus_probe_device+0x11c/0x160 Fix the leak by calling nanddev_ecc_engine_cleanup() inside spinand_cleanup().

In the Linux kernel, the following vulnerability has been resolved: block: fix resource leak in blk_register_queue() error path When registering a queue fails after blk_mq_sysfs_register() is successful but the function later encounters an error, we need to clean up the blk_mq_sysfs resources. Add the missing blk_mq_sysfs_unregister() call in the error path to properly clean up these resources and prevent a memory leak.

In the Linux kernel, the following vulnerability has been resolved: video: screen_info: Relocate framebuffers behind PCI bridges Apply PCI host-bridge window offsets to screen_info framebuffers. Fixes invalid access to I/O memory. Resources behind a PCI host bridge can be relocated by a certain offset in the kernel's CPU address range used for I/O. The framebuffer memory range stored in screen_info refers to the CPU addresses as seen during boot (where the offset is 0). During boot up, firmware may assign a different memory offset to the PCI host bridge and thereby relocating the framebuffer address of the PCI graphics device as seen by the kernel. The information in screen_info must be updated as well. The helper pcibios_bus_to_resource() performs the relocation of the screen_info's framebuffer resource (given in PCI bus addresses). The result matches the I/O-memory resource of the PCI graphics device (given in CPU addresses). As before, we store away the information necessary to later update the information in screen_info itself. Commit 78aa89d1dfba ("firmware/sysfb: Update screen_info for relocated EFI framebuffers") added the code for updating screen_info. It is based on similar functionality that pre-existed in efifb. Efifb uses a pointer to the PCI resource, while the newer code does a memcpy of the region. Hence efifb sees any updates to the PCI resource and avoids the issue. v3: - Only use struct pci_bus_region for PCI bus addresses (Bjorn) - Clarify address semantics in commit messages and comments (Bjorn) v2: - Fixed tags (Takashi, Ivan) - Updated information on efifb

go7007_snd_init in drivers/media/usb/go7007/snd-go7007.c in the Linux kernel before 5.6 does not call snd_card_free for a failure path, which causes a memory leak, aka CID-9453264ef586.

mwifiex_tm_cmd in drivers/net/wireless/marvell/mwifiex/cfg80211.c in the Linux kernel before 5.1.6 has some error-handling cases that did not free allocated hostcmd memory, aka CID-003b686ace82. This will cause a memory leak and denial of service.

In the Linux kernel before 5.1, there is a memory leak in __feat_register_sp() in net/dccp/feat.c, which may cause denial of service, aka CID-1d3ff0950e2b.

A memory leak in the sof_set_get_large_ctrl_data() function in sound/soc/sof/ipc.c in the Linux kernel through 5.3.9 allows attackers to cause a denial of service (memory consumption) by triggering sof_get_ctrl_copy_params() failures, aka CID-45c1380358b1.

A memory leak in the bnxt_re_create_srq() function in drivers/infiniband/hw/bnxt_re/ib_verbs.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering copy to udata failures, aka CID-4a9d46a9fe14.

A memory leak in the i40e_setup_macvlans() function in drivers/net/ethernet/intel/i40e/i40e_main.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering i40e_setup_channel() failures, aka CID-27d461333459.

A memory leak in the nl80211_get_ftm_responder_stats() function in net/wireless/nl80211.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering nl80211hdr_put() failures, aka CID-1399c59fa929. NOTE: third parties dispute the relevance of this because it occurs on a code path where a successful allocation has already occurred

A memory leak in the ccp_run_sha_cmd() function in drivers/crypto/ccp/ccp-ops.c in the Linux kernel through 5.3.9 allows attackers to cause a denial of service (memory consumption), aka CID-128c66429247.

A memory leak in the mlx5_fw_fatal_reporter_dump() function in drivers/net/ethernet/mellanox/mlx5/core/health.c in the Linux kernel before 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering mlx5_crdump_collect() failures, aka CID-c7ed6d0183d5.

A memory leak in the ql_alloc_large_buffers() function in drivers/net/ethernet/qlogic/qla3xxx.c in the Linux kernel before 5.3.5 allows local users to cause a denial of service (memory consumption) by triggering pci_dma_mapping_error() failures, aka CID-1acb8f2a7a9f.

In the Linux kernel, the following vulnerability has been resolved: ax25: Remove broken autobind Binding AX25 socket by using the autobind feature leads to memory leaks in ax25_connect() and also refcount leaks in ax25_release(). Memory leak was detected with kmemleak: ================================================================ unreferenced object 0xffff8880253cd680 (size 96): backtrace: __kmalloc_node_track_caller_noprof (./include/linux/kmemleak.h:43) kmemdup_noprof (mm/util.c:136) ax25_rt_autobind (net/ax25/ax25_route.c:428) ax25_connect (net/ax25/af_ax25.c:1282) __sys_connect_file (net/socket.c:2045) __sys_connect (net/socket.c:2064) __x64_sys_connect (net/socket.c:2067) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) ================================================================ When socket is bound, refcounts must be incremented the way it is done in ax25_bind() and ax25_setsockopt() (SO_BINDTODEVICE). In case of autobind, the refcounts are not incremented. This bug leads to the following issue reported by Syzkaller: ================================================================ ax25_connect(): syz-executor318 uses autobind, please contact jreuter@yaina.de ------------[ cut here ]------------ refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 0 PID: 5317 at lib/refcount.c:31 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31 Modules linked in: CPU: 0 UID: 0 PID: 5317 Comm: syz-executor318 Not tainted 6.14.0-rc4-syzkaller-00278-gece144f151ac #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31 ... Call Trace: <TASK> __refcount_dec include/linux/refcount.h:336 [inline] refcount_dec include/linux/refcount.h:351 [inline] ref_tracker_free+0x6af/0x7e0 lib/ref_tracker.c:236 netdev_tracker_free include/linux/netdevice.h:4302 [inline] netdev_put include/linux/netdevice.h:4319 [inline] ax25_release+0x368/0x960 net/ax25/af_ax25.c:1080 __sock_release net/socket.c:647 [inline] sock_close+0xbc/0x240 net/socket.c:1398 __fput+0x3e9/0x9f0 fs/file_table.c:464 __do_sys_close fs/open.c:1580 [inline] __se_sys_close fs/open.c:1565 [inline] __x64_sys_close+0x7f/0x110 fs/open.c:1565 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> ================================================================ Considering the issues above and the comments left in the code that say: "check if we can remove this feature. It is broken."; "autobinding in this may or may not work"; - it is better to completely remove this feature than to fix it because it is broken and leads to various kinds of memory bugs. Now calling connect() without first binding socket will result in an error (-EINVAL). Userspace software that relies on the autobind feature might get broken. However, this feature does not seem widely used with this specific driver as it was not reliable at any point of time, and it is already broken anyway. E.g. ax25-tools and ax25-apps packages for popular distributions do not use the autobind feature for AF_AX25. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw(). fib_check_nh_v6_gw() expects that fib6_nh_init() cleans up everything when it fails. Commit 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh") moved fib_nh_common_init() before alloc_percpu_gfp() within fib6_nh_init() but forgot to add cleanup for fib6_nh->nh_common.nhc_pcpu_rth_output in case it fails to allocate fib6_nh->rt6i_pcpu, resulting in memleak. Let's call fib_nh_common_release() and clear nhc_pcpu_rth_output in the error path. Note that we can remove the fib6_nh_release() call in nh_create_ipv6() later in net-next.git.

In the Linux kernel, the following vulnerability has been resolved: net: mctp: unshare packets when reassembling Ensure that the frag_list used for reassembly isn't shared with other packets. This avoids incorrect reassembly when packets are cloned, and prevents a memory leak due to circular references between fragments and their skb_shared_info. The upcoming MCTP-over-USB driver uses skb_clone which can trigger the problem - other MCTP drivers don't share SKBs. A kunit test is added to reproduce the issue.

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels Some lwtunnels have a dst cache for post-transformation dst. If the packet destination did not change we may end up recording a reference to the lwtunnel in its own cache, and the lwtunnel state will never be freed. Discovered by the ioam6.sh test, kmemleak was recently fixed to catch per-cpu memory leaks. I'm not sure if rpl and seg6 can actually hit this, but in principle I don't see why not.

In the Linux kernel, the following vulnerability has been resolved: drm/hyperv: Fix address space leak when Hyper-V DRM device is removed When a Hyper-V DRM device is probed, the driver allocates MMIO space for the vram, and maps it cacheable. If the device removed, or in the error path for device probing, the MMIO space is released but no unmap is done. Consequently the kernel address space for the mapping is leaked. Fix this by adding iounmap() calls in the device removal path, and in the error path during device probing.

In the Linux kernel, the following vulnerability has been resolved: netmem: prevent TX of unreadable skbs Currently on stable trees we have support for netmem/devmem RX but not TX. It is not safe to forward/redirect an RX unreadable netmem packet into the device's TX path, as the device may call dma-mapping APIs on dma addrs that should not be passed to it. Fix this by preventing the xmit of unreadable skbs. Tested by configuring tc redirect: sudo tc qdisc add dev eth1 ingress sudo tc filter add dev eth1 ingress protocol ip prio 1 flower ip_proto \ tcp src_ip 192.168.1.12 action mirred egress redirect dev eth1 Before, I see unreadable skbs in the driver's TX path passed to dma mapping APIs. After, I don't see unreadable skbs in the driver's TX path passed to dma mapping APIs.

A vulnerability was found in Linux Kernel. It has been rated as problematic. This issue affects some unknown processing of the file fs/fscache/cookie.c of the component IPsec. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211931.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add() In mpt3sas_transport_port_add(), if sas_rphy_add() returns error, sas_rphy_free() needs be called to free the resource allocated in sas_end_device_alloc(). Otherwise a kernel crash will happen: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G W 6.1.0-rc1+ #189 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x54/0x3d0 lr : device_del+0x37c/0x3d0 Call trace: device_del+0x54/0x3d0 attribute_container_class_device_del+0x28/0x38 transport_remove_classdev+0x6c/0x80 attribute_container_device_trigger+0x108/0x110 transport_remove_device+0x28/0x38 sas_rphy_remove+0x50/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_rphy_remove+0x38/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_remove_host+0x20/0x38 [scsi_transport_sas] scsih_remove+0xd8/0x420 [mpt3sas] Because transport_add_device() is not called when sas_rphy_add() fails, the device is not added. When sas_rphy_remove() is subsequently called to remove the device in the remove() path, a NULL pointer dereference happens.

In the Linux kernel, the following vulnerability has been resolved: virtio: packed: fix unmap leak for indirect desc table When use_dma_api and premapped are true, then the do_unmap is false. Because the do_unmap is false, vring_unmap_extra_packed is not called by detach_buf_packed. if (unlikely(vq->do_unmap)) { curr = id; for (i = 0; i < state->num; i++) { vring_unmap_extra_packed(vq, &vq->packed.desc_extra[curr]); curr = vq->packed.desc_extra[curr].next; } } So the indirect desc table is not unmapped. This causes the unmap leak. So here, we check vq->use_dma_api instead. Synchronously, dma info is updated based on use_dma_api judgment This bug does not occur, because no driver use the premapped with indirect.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-tpg: fix some memleaks in tpg_alloc In tpg_alloc, resources should be deallocated in each and every error-handling paths, since they are allocated in for statements. Otherwise there would be memleaks because tpg_free is called only when tpg_alloc return 0.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity The entity->name (i.e. name) is allocated in v4l2_m2m_register_entity but isn't freed in its following error-handling paths. This patch adds such deallocation to prevent memleak of entity->name.

In the Linux kernel, the following vulnerability has been resolved: media: go7007: fix a memleak in go7007_load_encoder In go7007_load_encoder, bounce(i.e. go->boot_fw), is allocated without a deallocation thereafter. After the following call chain: saa7134_go7007_init |-> go7007_boot_encoder |-> go7007_load_encoder |-> kfree(go) go is freed and thus bounce is leaked.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix several DMA buffer leaks Nouveau manages GSP-RM DMA buffers with nvkm_gsp_mem objects. Several of these buffers are never dealloced. Some of them can be deallocated right after GSP-RM is initialized, but the rest need to stay until the driver unloads. Also futher bullet-proof these objects by poisoning the buffer and clearing the nvkm_gsp_mem object when it is deallocated. Poisoning the buffer should trigger an error (or crash) from GSP-RM if it tries to access the buffer after we've deallocated it, because we were wrong about when it is safe to deallocate. Finally, change the mem->size field to a size_t because that's the same type that dma_alloc_coherent expects.

In the Linux kernel, the following vulnerability has been resolved: net/handshake: Fix handshake_req_destroy_test1 Recently, handshake_req_destroy_test1 started failing: Expected handshake_req_destroy_test == req, but handshake_req_destroy_test == 0000000000000000 req == 0000000060f99b40 not ok 11 req_destroy works This is because "sock_release(sock)" was replaced with "fput(filp)" to address a memory leak. Note that sock_release() is synchronous but fput() usually delays the final close and clean-up. The delay is not consequential in the other cases that were changed but handshake_req_destroy_test1 is testing that handshake_req_cancel() followed by closing the file actually does call the ->hp_destroy method. Thus the PTR_EQ test at the end has to be sure that the final close is complete before it checks the pointer. We cannot use a completion here because if ->hp_destroy is never called (ie, there is an API bug) then the test will hang. Reported by: Guenter Roeck <linux@roeck-us.net>

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix memory leak This checks if CONFIG_DEV_COREDUMP is enabled before attempting to clone the skb and also make sure btmtk_process_coredump frees the skb passed following the same logic.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix a memory leak in nf_tables_updchain If nft_netdev_register_hooks() fails, the memory associated with nft_stats is not freed, causing a memory leak. This patch fixes it by moving nft_stats_alloc() down after nft_netdev_register_hooks() succeeds.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix memory leak in create_process failure Fix memory leak due to a leaked mmget reference on an error handling code path that is triggered when attempting to create KFD processes while a GPU reset is in progress.

In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix a memleak in init_credit_return When dma_alloc_coherent fails to allocate dd->cr_base[i].va, init_credit_return should deallocate dd->cr_base and dd->cr_base[i] that allocated before. Or those resources would be never freed and a memleak is triggered.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix some memleaks in gssx_dec_option_array The creds and oa->data need to be freed in the error-handling paths after their allocation. So this patch add these deallocations in the corresponding paths.

In the Linux kernel, the following vulnerability has been resolved: virtio_net: fix memory leak inside XPD_TX with mergeable When we call xdp_convert_buff_to_frame() to get xdpf, if it returns NULL, we should check if xdp_page was allocated by xdp_linearize_page(). If it is newly allocated, it should be freed here alone. Just like any other "goto err_xdp".