In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Fix memory leak in vkms_init() A memory leak was reported after the vkms module install failed. unreferenced object 0xffff88810bc28520 (size 16): comm "modprobe", pid 9662, jiffies 4298009455 (age 42.590s) hex dump (first 16 bytes): 01 01 00 64 81 88 ff ff 00 00 dc 0a 81 88 ff ff ...d............ backtrace: [<00000000e7561ff8>] kmalloc_trace+0x27/0x60 [<000000000b1954a0>] 0xffffffffc45200a9 [<00000000abbf1da0>] do_one_initcall+0xd0/0x4f0 [<000000001505ee87>] do_init_module+0x1a4/0x680 [<00000000958079ad>] load_module+0x6249/0x7110 [<00000000117e4696>] __do_sys_finit_module+0x140/0x200 [<00000000f74b12d2>] do_syscall_64+0x35/0x80 [<000000008fc6fcde>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 The reason is that the vkms_init() returns without checking the return value of vkms_create(), and if the vkms_create() failed, the config allocated at the beginning of vkms_init() is leaked. vkms_init() config = kmalloc(...) # config allocated ... return vkms_create() # vkms_create failed and config is leaked Fix this problem by checking return value of vkms_create() and free the config if error happened.

In the Linux kernel, the following vulnerability has been resolved: vdpasim: fix memory leak when freeing IOTLBs After commit bda324fd037a ("vdpasim: control virtqueue support"), vdpasim->iommu became an array of IOTLB, so we should clean the mappings of each free one by one instead of just deleting the ranges in the first IOTLB which may leak maps.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix leaking uninitialized memory in fast-commit journal When space at the end of fast-commit journal blocks is unused, make sure to zero it out so that uninitialized memory is not leaked to disk.

In the Linux kernel, the following vulnerability has been resolved: integrity: Fix memory leakage in keyring allocation error path Key restriction is allocated in integrity_init_keyring(). However, if keyring allocation failed, it is not freed, causing memory leaks.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit() The brcmf_netdev_start_xmit() returns NETDEV_TX_OK without freeing skb in case of pskb_expand_head() fails, add dev_kfree_skb() to fix it. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe() In rpi_firmware_probe(), if mbox_request_channel() fails, the 'fw' will not be freed through rpi_firmware_delete(), fix this leak by calling kfree() in the error path.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix neighbour and rtable leak in smc_ib_find_route() In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable resolved by ip_route_output_flow() are not released or put before return. It may cause the refcount leak, so fix it.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix potential memory leaks When the driver hits -ENOMEM at allocating a URB or a buffer, it aborts and goes to the error path that releases the all previously allocated resources. However, when -ENOMEM hits at the middle of the sync EP URB allocation loop, the partially allocated URBs might be left without released, because ep->nurbs is still zero at that point. Fix it by setting ep->nurbs at first, so that the error handler loops over the full URB list.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: Add the missed acpi_put_table() to fix memory leak When the radeon driver reads the bios information from ACPI table in radeon_acpi_vfct_bios(), it misses to call acpi_put_table() to release the ACPI memory after the init, so add acpi_put_table() properly to fix the memory leak. v2: fix text formatting (Alex)

In the Linux kernel, the following vulnerability has been resolved: ipc: fix memory leak in init_mqueue_fs() When setup_mq_sysctls() failed in init_mqueue_fs(), mqueue_inode_cachep is not released. In order to fix this issue, the release path is reordered.

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix memory leak in lbs_init_adapter() When kfifo_alloc() failed in lbs_init_adapter(), cmd buffer is not released. Add free memory to processing error path.

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove() The cmd_buff needs to be freed when error happened in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove().

In the Linux kernel, the following vulnerability has been resolved: tipc: fix a possible memleak in tipc_buf_append __skb_linearize() doesn't free the skb when it fails, so move '*buf = NULL' after __skb_linearize(), so that the skb can be freed on the err path.

In the Linux kernel, the following vulnerability has been resolved: clk: socfpga: Fix memory leak in socfpga_gate_init() Free @socfpga_clk and @ops on the error path to avoid memory leak issue.

In the Linux kernel, the following vulnerability has been resolved: perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init() arm_smmu_pmu_init() won't remove the callback added by cpuhp_setup_state_multi() when platform_driver_register() failed. Remove the callback by cpuhp_remove_multi_state() in fail path. Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus: arm-ccn: Prevent hotplug callback leak")

In the Linux kernel, the following vulnerability has been resolved: usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq Can not set the @shared_hcd to NULL before decrease the usage count by usb_put_hcd(), this will cause the shared hcd not released.

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix a potential memory leak in rtw_init_cmd_priv() In rtw_init_cmd_priv(), if `pcmdpriv->rsp_allocated_buf` is allocated in failure, then `pcmdpriv->cmd_allocated_buf` will be not properly released. Besides, considering there are only two error paths and the first one can directly return, so we do not need implicitly jump to the `exit` tag to execute the error handler. So this patch added `kfree(pcmdpriv->cmd_allocated_buf);` on the error path to release the resource and simplified the return logic of rtw_init_cmd_priv(). As there is no proper device to test with, no runtime testing was performed.

In the Linux kernel, the following vulnerability has been resolved: net: hinic: fix the issue of CMDQ memory leaks When hinic_set_cmdq_depth() fails in hinic_init_cmdqs(), the cmdq memory is not released correctly. Fix it.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: mhi: fix potential memory leak in ath11k_mhi_register() mhi_alloc_controller() allocates a memory space for mhi_ctrl. When gets some error, mhi_ctrl should be freed with mhi_free_controller(). But when ath11k_mhi_read_addr_from_dt() fails, the function returns without calling mhi_free_controller(), which will lead to a memory leak. We can fix it by calling mhi_free_controller() when ath11k_mhi_read_addr_from_dt() fails.

In the Linux kernel, the following vulnerability has been resolved: usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info() xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add() In mpt3sas_transport_port_add(), if sas_rphy_add() returns error, sas_rphy_free() needs be called to free the resource allocated in sas_end_device_alloc(). Otherwise a kernel crash will happen: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G W 6.1.0-rc1+ #189 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x54/0x3d0 lr : device_del+0x37c/0x3d0 Call trace: device_del+0x54/0x3d0 attribute_container_class_device_del+0x28/0x38 transport_remove_classdev+0x6c/0x80 attribute_container_device_trigger+0x108/0x110 transport_remove_device+0x28/0x38 sas_rphy_remove+0x50/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_rphy_remove+0x38/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_remove_host+0x20/0x38 [scsi_transport_sas] scsih_remove+0xd8/0x420 [mpt3sas] Because transport_add_device() is not called when sas_rphy_add() fails, the device is not added. When sas_rphy_remove() is subsequently called to remove the device in the remove() path, a NULL pointer dereference happens.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix memory leak in ocfs2_stack_glue_init() ocfs2_table_header should be free in ocfs2_stack_glue_init() if ocfs2_sysfs_init() failed, otherwise kmemleak will report memleak. BUG: memory leak unreferenced object 0xffff88810eeb5800 (size 128): comm "modprobe", pid 4507, jiffies 4296182506 (age 55.888s) hex dump (first 32 bytes): c0 40 14 a0 ff ff ff ff 00 00 00 00 01 00 00 00 .@.............. 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000001e59e1cd>] __register_sysctl_table+0xca/0xef0 [<00000000c04f70f7>] 0xffffffffa0050037 [<000000001bd12912>] do_one_initcall+0xdb/0x480 [<0000000064f766c9>] do_init_module+0x1cf/0x680 [<000000002ba52db0>] load_module+0x6441/0x6f20 [<000000009772580d>] __do_sys_finit_module+0x12f/0x1c0 [<00000000380c1f22>] do_syscall_64+0x3f/0x90 [<000000004cf473bc>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Don't free decrypted memory In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. The netvsc driver could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the gpadl to decide whether to free the memory.

In the Linux kernel, the following vulnerability has been resolved: netdevsim: fix memory leak in nsim_drv_probe() when nsim_dev_resources_register() failed If some items in nsim_dev_resources_register() fail, memory leak will occur. The following is the memory leak information. unreferenced object 0xffff888074c02600 (size 128): comm "echo", pid 8159, jiffies 4294945184 (age 493.530s) hex dump (first 32 bytes): 40 47 ea 89 ff ff ff ff 01 00 00 00 00 00 00 00 @G.............. ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace: [<0000000011a31c98>] kmalloc_trace+0x22/0x60 [<0000000027384c69>] devl_resource_register+0x144/0x4e0 [<00000000a16db248>] nsim_drv_probe+0x37a/0x1260 [<000000007d1f448c>] really_probe+0x20b/0xb10 [<00000000c416848a>] __driver_probe_device+0x1b3/0x4a0 [<00000000077e0351>] driver_probe_device+0x49/0x140 [<0000000054f2465a>] __device_attach_driver+0x18c/0x2a0 [<000000008538f359>] bus_for_each_drv+0x151/0x1d0 [<0000000038e09747>] __device_attach+0x1c9/0x4e0 [<00000000dd86e533>] bus_probe_device+0x1d5/0x280 [<00000000839bea35>] device_add+0xae0/0x1cb0 [<000000009c2abf46>] new_device_store+0x3b6/0x5f0 [<00000000fb823d7f>] bus_attr_store+0x72/0xa0 [<000000007acc4295>] sysfs_kf_write+0x106/0x160 [<000000005f50cb4d>] kernfs_fop_write_iter+0x3a8/0x5a0 [<0000000075eb41bf>] vfs_write+0x8f0/0xc80

In the Linux kernel, the following vulnerability has been resolved: qibfs: fix dentry leak simple_recursive_removal() drops the pinning references to all positives in subtree. For the cases when its argument has been kept alive by the pinning alone that's exactly the right thing to do, but here the argument comes from dcache lookup, that needs to be balanced by explicit dput(). Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>

In the Linux kernel, the following vulnerability has been resolved: orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init() When insert and remove the orangefs module, there are memory leaked as below: unreferenced object 0xffff88816b0cc000 (size 2048): comm "insmod", pid 783, jiffies 4294813439 (age 65.512s) hex dump (first 32 bytes): 6e 6f 6e 65 0a 00 00 00 00 00 00 00 00 00 00 00 none............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000031ab7788>] kmalloc_trace+0x27/0xa0 [<000000005b405fee>] orangefs_debugfs_init.cold+0xaf/0x17f [<00000000e5a0085b>] 0xffffffffa02780f9 [<000000004232d9f7>] do_one_initcall+0x87/0x2a0 [<0000000054f22384>] do_init_module+0xdf/0x320 [<000000003263bdea>] load_module+0x2f98/0x3330 [<0000000052cd4153>] __do_sys_finit_module+0x113/0x1b0 [<00000000250ae02b>] do_syscall_64+0x35/0x80 [<00000000f11c03c7>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Use the golbal variable as the buffer rather than dynamic allocate to slove the problem.

In the Linux kernel, the following vulnerability has been resolved: drm/amd: fix potential memory leak This patch fix potential memory leak (clk_src) when function run into last return NULL. s/free/kfree/ - Alex

In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: fix possible memory leak in mousevsc_probe() If hid_add_device() returns error, it should call hid_destroy_device() to free hid_dev which is allocated in hid_allocate_device().

In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: fix VM_PAT handling in COW mappings PAT handling won't do the right thing in COW mappings: the first PTE (or, in fact, all PTEs) can be replaced during write faults to point at anon folios. Reliably recovering the correct PFN and cachemode using follow_phys() from PTEs will not work in COW mappings. Using follow_phys(), we might just get the address+protection of the anon folio (which is very wrong), or fail on swap/nonswap entries, failing follow_phys() and triggering a WARN_ON_ONCE() in untrack_pfn() and track_pfn_copy(), not properly calling free_pfn_range(). In free_pfn_range(), we either wouldn't call memtype_free() or would call it with the wrong range, possibly leaking memory. To fix that, let's update follow_phys() to refuse returning anon folios, and fallback to using the stored PFN inside vma->vm_pgoff for COW mappings if we run into that. We will now properly handle untrack_pfn() with COW mappings, where we don't need the cachemode. We'll have to fail fork()->track_pfn_copy() if the first page was replaced by an anon folio, though: we'd have to store the cachemode in the VMA to make this work, likely growing the VMA size. For now, lets keep it simple and let track_pfn_copy() just fail in that case: it would have failed in the past with swap/nonswap entries already, and it would have done the wrong thing with anon folios. Simple reproducer to trigger the WARN_ON_ONCE() in untrack_pfn(): <--- C reproducer ---> #include <stdio.h> #include <sys/mman.h> #include <unistd.h> #include <liburing.h> int main(void) { struct io_uring_params p = {}; int ring_fd; size_t size; char *map; ring_fd = io_uring_setup(1, &p); if (ring_fd < 0) { perror("io_uring_setup"); return 1; } size = p.sq_off.array + p.sq_entries * sizeof(unsigned); /* Map the submission queue ring MAP_PRIVATE */ map = mmap(0, size, PROT_READ | PROT_WRITE, MAP_PRIVATE, ring_fd, IORING_OFF_SQ_RING); if (map == MAP_FAILED) { perror("mmap"); return 1; } /* We have at least one page. Let's COW it. */ *map = 0; pause(); return 0; } <--- C reproducer ---> On a system with 16 GiB RAM and swap configured: # ./iouring & # memhog 16G # killall iouring [ 301.552930] ------------[ cut here ]------------ [ 301.553285] WARNING: CPU: 7 PID: 1402 at arch/x86/mm/pat/memtype.c:1060 untrack_pfn+0xf4/0x100 [ 301.553989] Modules linked in: binfmt_misc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_g [ 301.558232] CPU: 7 PID: 1402 Comm: iouring Not tainted 6.7.5-100.fc38.x86_64 #1 [ 301.558772] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebu4 [ 301.559569] RIP: 0010:untrack_pfn+0xf4/0x100 [ 301.559893] Code: 75 c4 eb cf 48 8b 43 10 8b a8 e8 00 00 00 3b 6b 28 74 b8 48 8b 7b 30 e8 ea 1a f7 000 [ 301.561189] RSP: 0018:ffffba2c0377fab8 EFLAGS: 00010282 [ 301.561590] RAX: 00000000ffffffea RBX: ffff9208c8ce9cc0 RCX: 000000010455e047 [ 301.562105] RDX: 07fffffff0eb1e0a RSI: 0000000000000000 RDI: ffff9208c391d200 [ 301.562628] RBP: 0000000000000000 R08: ffffba2c0377fab8 R09: 0000000000000000 [ 301.563145] R10: ffff9208d2292d50 R11: 0000000000000002 R12: 00007fea890e0000 [ 301.563669] R13: 0000000000000000 R14: ffffba2c0377fc08 R15: 0000000000000000 [ 301.564186] FS: 0000000000000000(0000) GS:ffff920c2fbc0000(0000) knlGS:0000000000000000 [ 301.564773] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 301.565197] CR2: 00007fea88ee8a20 CR3: 00000001033a8000 CR4: 0000000000750ef0 [ 301.565725] PKRU: 55555554 [ 301.565944] Call Trace: [ 301.566148] <TASK> [ 301.566325] ? untrack_pfn+0xf4/0x100 [ 301.566618] ? __warn+0x81/0x130 [ 301.566876] ? untrack_pfn+0xf4/0x100 [ 3 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction. However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation. The fix is to ensure that every qgroup PREALLOC reservation observes the following properties: 1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation. This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: fix memory leak in sja1105_setup_devlink_regions() When dsa_devlink_region_create failed in sja1105_setup_devlink_regions(), priv->regions is not released.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: Fix possible memory leaks in dsa_loop_init() kmemleak reported memory leaks in dsa_loop_init(): kmemleak: 12 new suspected memory leaks unreferenced object 0xffff8880138ce000 (size 2048): comm "modprobe", pid 390, jiffies 4295040478 (age 238.976s) backtrace: [<000000006a94f1d5>] kmalloc_trace+0x26/0x60 [<00000000a9c44622>] phy_device_create+0x5d/0x970 [<00000000d0ee2afc>] get_phy_device+0xf3/0x2b0 [<00000000dca0c71f>] __fixed_phy_register.part.0+0x92/0x4e0 [<000000008a834798>] fixed_phy_register+0x84/0xb0 [<0000000055223fcb>] dsa_loop_init+0xa9/0x116 [dsa_loop] ... There are two reasons for memleak in dsa_loop_init(). First, fixed_phy_register() create and register phy_device: fixed_phy_register() get_phy_device() phy_device_create() # freed by phy_device_free() phy_device_register() # freed by phy_device_remove() But fixed_phy_unregister() only calls phy_device_remove(). So the memory allocated in phy_device_create() is leaked. Second, when mdio_driver_register() fail in dsa_loop_init(), it just returns and there is no cleanup for phydevs. Fix the problems by catching the error of mdio_driver_register() in dsa_loop_init(), then calling both fixed_phy_unregister() and phy_device_free() to release phydevs. Also add a function for phydevs cleanup to avoid duplacate.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix resource leak in lpfc_sli4_send_seq_to_ulp() If no handler is found in lpfc_complete_unsol_iocb() to match the rctl of a received frame, the frame is dropped and resources are leaked. Fix by returning resources when discarding an unhandled frame type. Update lpfc_fc_frame_check() handling of NOP basic link service.

In the Linux kernel, the following vulnerability has been resolved: dpaa2-eth: retrieve the virtual address before dma_unmap The TSO header was DMA unmapped before the virtual address was retrieved and then used to free the buffer. This meant that we were actually removing the DMA map and then trying to search for it to help in retrieving the virtual address. This lead to a invalid virtual address being used in the kfree call. Fix this by calling dpaa2_iova_to_virt() prior to the dma_unmap call. [ 487.231819] Unable to handle kernel paging request at virtual address fffffd9807000008 (...) [ 487.354061] Hardware name: SolidRun LX2160A Honeycomb (DT) [ 487.359535] pstate: a0400005 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 487.366485] pc : kfree+0xac/0x304 [ 487.369799] lr : kfree+0x204/0x304 [ 487.373191] sp : ffff80000c4eb120 [ 487.376493] x29: ffff80000c4eb120 x28: ffff662240c46400 x27: 0000000000000001 [ 487.383621] x26: 0000000000000001 x25: ffff662246da0cc0 x24: ffff66224af78000 [ 487.390748] x23: ffffad184f4ce008 x22: ffffad1850185000 x21: ffffad1838d13cec [ 487.397874] x20: ffff6601c0000000 x19: fffffd9807000000 x18: 0000000000000000 [ 487.405000] x17: ffffb910cdc49000 x16: ffffad184d7d9080 x15: 0000000000004000 [ 487.412126] x14: 0000000000000008 x13: 000000000000ffff x12: 0000000000000000 [ 487.419252] x11: 0000000000000004 x10: 0000000000000001 x9 : ffffad184d7d927c [ 487.426379] x8 : 0000000000000000 x7 : 0000000ffffffd1d x6 : ffff662240a94900 [ 487.433505] x5 : 0000000000000003 x4 : 0000000000000009 x3 : ffffad184f4ce008 [ 487.440632] x2 : ffff662243eec000 x1 : 0000000100000100 x0 : fffffc0000000000 [ 487.447758] Call trace: [ 487.450194] kfree+0xac/0x304 [ 487.453151] dpaa2_eth_free_tx_fd.isra.0+0x33c/0x3e0 [fsl_dpaa2_eth] [ 487.459507] dpaa2_eth_tx_conf+0x100/0x2e0 [fsl_dpaa2_eth] [ 487.464989] dpaa2_eth_poll+0xdc/0x380 [fsl_dpaa2_eth]

In the Linux kernel, the following vulnerability has been resolved: amt: fix memory leak for advertisement message When a gateway receives an advertisement message, it extracts relay information and then it should be freed. But the advertisement handler doesn't free it. So, memory leak would occur.

In the Linux kernel, the following vulnerability has been resolved: bridge: switchdev: Fix memory leaks when changing VLAN protocol The bridge driver can offload VLANs to the underlying hardware either via switchdev or the 8021q driver. When the former is used, the VLAN is marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV' private flag. To avoid the memory leaks mentioned in the cited commit, the bridge driver will try to delete a VLAN via the 8021q driver if the VLAN is not marked with the previously mentioned flag. When the VLAN protocol of the bridge changes, switchdev drivers are notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but the 8021q driver is also called to add the existing VLANs with the new protocol and delete them with the old protocol. In case the VLANs were offloaded via switchdev, the above behavior is both redundant and buggy. Redundant because the VLANs are already programmed in hardware and drivers that support VLAN protocol change (currently only mlx5) change the protocol upon the switchdev attribute notification. Buggy because the 8021q driver is called despite these VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to memory leaks [1] when the VLANs are deleted. Fix by not calling the 8021q driver for VLANs that were already programmed via switchdev. [1] unreferenced object 0xffff8881f6771200 (size 256): comm "ip", pid 446855, jiffies 4298238841 (age 55.240s) hex dump (first 32 bytes): 00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000012819ac>] vlan_vid_add+0x437/0x750 [<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920 [<000000000632b56f>] br_changelink+0x3d6/0x13f0 [<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0 [<00000000f6276baf>] rtnl_newlink+0x5f/0x90 [<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00 [<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340 [<0000000010588814>] netlink_unicast+0x438/0x710 [<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40 [<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0 [<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0 [<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0 [<00000000684f7e25>] __sys_sendmsg+0xab/0x130 [<000000004538b104>] do_syscall_64+0x3d/0x90 [<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: kunit: executor: Fix a memory leak on failure in kunit_filter_tests It's possible that memory allocation for 'filtered' will fail, but for the copy of the suite to succeed. In this case, the copy could be leaked. Properly free 'copy' in the error case for the allocation of 'filtered' failing. Note that there may also have been a similar issue in kunit_filter_subsuites, before it was removed in "kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites". This was reported by clang-analyzer via the kernel test robot, here: https://lore.kernel.org/all/c8073b8e-7b9e-0830-4177-87c12f16349c@intel.com/ And by smatch via Dan Carpenter and the kernel test robot: https://lore.kernel.org/all/202207101328.ASjx88yj-lkp@intel.com/

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. The VMBus ring buffer code could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the struct vmbus_gpadl for the ring buffers to decide whether to free the memory.

In the Linux kernel, the following vulnerability has been resolved: media: tw686x: Fix memory leak in tw686x_video_init video_device_alloc() allocates memory for vdev, when video_register_device() fails, it doesn't release the memory and leads to memory leak, call video_device_release() to fix this.

In the Linux kernel, the following vulnerability has been resolved: ath11k: fix missing skb drop on htc_tx_completion error On htc_tx_completion error the skb is not dropped. This is wrong since the completion_handler logic expect the skb to be consumed anyway even when an error is triggered. Not freeing the skb on error is a memory leak since the skb won't be freed anywere else. Correctly free the packet on eid >= ATH11K_HTC_EP_COUNT before returning. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: mt76: mt76x02u: fix possible memory leak in __mt76x02u_mcu_send_msg Free the skb if mt76u_bulk_msg fails in __mt76x02u_mcu_send_msg routine.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix cxl_region leak, cleanup targets at region delete When a region is deleted any targets that have been previously assigned to that region hold references to it. Trigger those references to drop by detaching all targets at unregister_region() time. Otherwise that region object will leak as userspace has lost the ability to detach targets once region sysfs is torn down.

In the Linux kernel, the following vulnerability has been resolved: jffs2: fix memory leak in jffs2_do_mount_fs If jffs2_build_filesystem() in jffs2_do_mount_fs() returns an error, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff88811b25a640 (size 64): comm "mount", pid 691, jiffies 4294957728 (age 71.952s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffa493be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffa5423a06>] jffs2_sum_init+0x86/0x130 [<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0 [<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0 [...] unreferenced object 0xffff88812c760000 (size 65536): comm "mount", pid 691, jiffies 4294957728 (age 71.952s) hex dump (first 32 bytes): bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ backtrace: [<ffffffffa493a449>] __kmalloc+0x6b9/0x910 [<ffffffffa5423a57>] jffs2_sum_init+0xd7/0x130 [<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0 [<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0 [...] -------------------------------------------- This is because the resources allocated in jffs2_sum_init() are not released. Call jffs2_sum_exit() to release these resources to solve the problem.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix multishot accept request leaks Having REQ_F_POLLED set doesn't guarantee that the request is executed as a multishot from the polling path. Fortunately for us, if the code thinks it's multishot issue when it's not, it can only ask to skip completion so leaking the request. Use issue_flags to mark multipoll issues.

In the Linux kernel, the following vulnerability has been resolved: capabilities: fix potential memleak on error path from vfs_getxattr_alloc() In cap_inode_getsecurity(), we will use vfs_getxattr_alloc() to complete the memory allocation of tmpbuf, if we have completed the memory allocation of tmpbuf, but failed to call handler->get(...), there will be a memleak in below logic: |-- ret = (int)vfs_getxattr_alloc(mnt_userns, ...) | /* ^^^ alloc for tmpbuf */ |-- value = krealloc(*xattr_value, error + 1, flags) | /* ^^^ alloc memory */ |-- error = handler->get(handler, ...) | /* error! */ |-- *xattr_value = value | /* xattr_value is &tmpbuf (memory leak!) */ So we will try to free(tmpbuf) after vfs_getxattr_alloc() fails to fix it. [PM: subject line and backtrace tweaks]

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: add missing ->fini_microcode interface for Sienna Cichlid To avoid any potential memory leak.

In the Linux kernel, the following vulnerability has been resolved: virtio_net: fix memory leak inside XPD_TX with mergeable When we call xdp_convert_buff_to_frame() to get xdpf, if it returns NULL, we should check if xdp_page was allocated by xdp_linearize_page(). If it is newly allocated, it should be freed here alone. Just like any other "goto err_xdp".

In the Linux kernel, the following vulnerability has been resolved: coresight: syscfg: Fix memleak on registration failure in cscfg_create_device device_register() calls device_initialize(), according to doc of device_initialize: Use put_device() to give up your reference instead of freeing * @dev directly once you have called this function. To prevent potential memleak, use put_device() for error handling.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix ulist leaks in error paths of qgroup self tests In the test_no_shared_qgroup() and test_multiple_refs() qgroup self tests, if we fail to add the tree ref, remove the extent item or remove the extent ref, we are returning from the test function without freeing the "old_roots" ulist that was allocated by the previous calls to btrfs_find_all_roots(). Fix that by calling ulist_free() before returning.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leak in parse_apply_sb_mount_options() If processing the on-disk mount options fails after any memory was allocated in the ext4_fs_context, e.g. s_qf_names, then this memory is leaked. Fix this by calling ext4_fc_free() instead of kfree() directly. Reproducer: mkfs.ext4 -F /dev/vdc tune2fs /dev/vdc -E mount_opts=usrjquota=file echo clear > /sys/kernel/debug/kmemleak mount /dev/vdc /vdc echo scan > /sys/kernel/debug/kmemleak sleep 5 echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak