In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Remove register from DCN35 DMCUB diagnostic collection [Why] These registers should not be read from driver and triggering the security violation when DMCUB work times out and diagnostics are collected blocks Z8 entry. [How] Remove the register read from DCN35.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix spin_unlock_irqrestore() called with IRQs enabled Fix missuse of spin_lock_irq()/spin_unlock_irq() when spin_lock_irqsave()/spin_lock_irqrestore() was hold. This was discovered through the lock debugging, and the corresponding log is as follows: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 96 PID: 2074 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40 ... Call trace: warn_bogus_irq_restore+0x30/0x40 _raw_spin_unlock_irqrestore+0x84/0xc8 add_qp_to_list+0x11c/0x148 [hns_roce_hw_v2] hns_roce_create_qp_common.constprop.0+0x240/0x780 [hns_roce_hw_v2] hns_roce_create_qp+0x98/0x160 [hns_roce_hw_v2] create_qp+0x138/0x258 ib_create_qp_kernel+0x50/0xe8 create_mad_qp+0xa8/0x128 ib_mad_port_open+0x218/0x448 ib_mad_init_device+0x70/0x1f8 add_client_context+0xfc/0x220 enable_device_and_get+0xd0/0x140 ib_register_device.part.0+0xf4/0x1c8 ib_register_device+0x34/0x50 hns_roce_register_device+0x174/0x3d0 [hns_roce_hw_v2] hns_roce_init+0xfc/0x2c0 [hns_roce_hw_v2] __hns_roce_hw_v2_init_instance+0x7c/0x1d0 [hns_roce_hw_v2] hns_roce_hw_v2_init_instance+0x9c/0x180 [hns_roce_hw_v2]

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix duplicated reported IW_CM_EVENT_CONNECT_REPLY event If siw_recv_mpa_rr returns -EAGAIN, it means that the MPA reply hasn't been received completely, and should not report IW_CM_EVENT_CONNECT_REPLY in this case. This may trigger a call trace in iw_cm. A simple way to trigger this: server: ib_send_lat client: ib_send_lat -R <server_ip> The call trace looks like this: kernel BUG at drivers/infiniband/core/iwcm.c:894! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <...> Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: <TASK> cm_work_handler+0x1dd/0x370 [iw_cm] process_one_work+0x1e2/0x3b0 worker_thread+0x49/0x2e0 ? rescuer_thread+0x370/0x370 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8173: Fix refcount leak in mt8173_rt5650_rt5676_dev_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Fix missing of_node_put() in error paths.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix SQE threshold checking Current way of checking available SQE count which is based on HW updated SQB count could result in driver submitting an SQE even before CQE for the previously transmitted SQE at the same index is processed in NAPI resulting losing SKB pointers, hence a leak. Fix this by checking a consumer index which is updated once CQE is processed.

In the Linux kernel, the following vulnerability has been resolved: net: fix potential refcount leak in ndisc_router_discovery() The issue happens on specific paths in the function. After both the object `rt` and `neigh` are grabbed successfully, when `lifetime` is nonzero but the metric needs change, the function just deletes the route and set `rt` to NULL. Then, it may try grabbing `rt` and `neigh` again if above conditions hold. The function simply overwrite `neigh` if succeeds or returns if fails, without decreasing the reference count of previous `neigh`. This may result in memory leaks. Fix it by decrementing the reference count of `neigh` in place.

In the Linux kernel, the following vulnerability has been resolved: powerpc/xive: Fix refcount leak in xive_spapr_init of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: gadgetfs: ep_io - wait until IRQ finishes after usb_ep_queue() if wait_for_completion_interruptible() is interrupted we need to wait until IRQ gets finished. Otherwise complete() from epio_complete() can corrupt stack.

In the Linux kernel, the following vulnerability has been resolved: clocksource: hyper-v: unexport __init-annotated hv_init_clocksource() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, arch/x86/kernel/cpu/mshyperv.c is never compiled as modular. (CONFIG_HYPERVISOR_GUEST is boolean)

In the Linux kernel, the following vulnerability has been resolved: drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector() If drm_connector_init fails, intel_connector_free will be called to take care of proper free. So it is necessary to drop the refcount of port before intel_connector_free. (cherry picked from commit cea9ed611e85d36a05db52b6457bf584b7d969e2)

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: fix memory leak in query_regdb_file() In the function query_regdb_file() the alpha2 parameter is duplicated using kmemdup() and subsequently freed in regdb_fw_cb(). However, request_firmware_nowait() can fail without calling regdb_fw_cb() and thus leak memory.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: dwc-qos: Disable split header for Tegra194 There is a long-standing issue with the Synopsys DWC Ethernet driver for Tegra194 where random system crashes have been observed [0]. The problem occurs when the split header feature is enabled in the stmmac driver. In the bad case, a larger than expected buffer length is received and causes the calculation of the total buffer length to overflow. This results in a very large buffer length that causes the kernel to crash. Why this larger buffer length is received is not clear, however, the feedback from the NVIDIA design team is that the split header feature is not supported for Tegra194. Therefore, disable split header support for Tegra194 to prevent these random crashes from occurring. [0] https://lore.kernel.org/linux-tegra/b0b17697-f23e-8fa5-3757-604a86f3a095@nvidia.com/

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param In the `wilc_parse_join_bss_param` function, the TSF field of the `ies` structure is accessed after the RCU read-side critical section is unlocked. According to RCU usage rules, this is illegal. Reusing this pointer can lead to unpredictable behavior, including accessing memory that has been updated or causing use-after-free issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the TSF value is now stored in a local variable `ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is then assigned using this local variable, ensuring that the TSF value is safely accessed.

In the Linux kernel, the following vulnerability has been resolved: Input: i8042 - fix leaking of platform device on module removal Avoid resetting the module-wide i8042_platform_device pointer in i8042_probe() or i8042_remove(), so that the device can be properly destroyed by i8042_exit() on module unload.

In the Linux kernel, the following vulnerability has been resolved: drm/etnaviv: check for reaped mapping in etnaviv_iommu_unmap_gem When the mapping is already reaped the unmap must be a no-op, as we would otherwise try to remove the mapping twice, corrupting the involved data structures.

In the Linux kernel, the following vulnerability has been resolved: nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred Similar to the handling of play_deferred in commit 19cfe912c37b ("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought a patch might be needed here as well. Currently usb_submit_urb is called directly to submit deferred tx urbs after unanchor them. So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb and cause memory leak. Put those urbs in tx_anchor to avoid the leak, and also fix the error handling.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: fix potential memleak in 'add_widget_node' As 'kobject_add' may allocated memory for 'kobject->name' when return error. And in this function, if call 'kobject_add' failed didn't free kobject. So call 'kobject_put' to recycling resources.

An issue was discovered in the Linux kernel before 5.8.10. virt/kvm/kvm_main.c has a kvm_io_bus_unregister_dev memory leak upon a kmalloc failure, aka CID-f65886606c2d.

An issue was discovered in the Linux kernel before 5.9. arch/x86/kvm/svm/sev.c allows attackers to cause a denial of service (soft lockup) by triggering destruction of a large SEV VM (which requires unregistering many encrypted regions), aka CID-7be74942f184.

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't take dev_replace rwsem on task already holding it Running fstests btrfs/011 with MKFS_OPTIONS="-O rst" to force the usage of the RAID stripe-tree, we get the following splat from lockdep: BTRFS info (device sdd): dev_replace from /dev/sdd (devid 1) to /dev/sdb started ============================================ WARNING: possible recursive locking detected 6.11.0-rc3-btrfs-for-next #599 Not tainted -------------------------------------------- btrfs/2326 is trying to acquire lock: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 but task is already holding lock: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&fs_info->dev_replace.rwsem); lock(&fs_info->dev_replace.rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by btrfs/2326: #0: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 stack backtrace: CPU: 1 UID: 0 PID: 2326 Comm: btrfs Not tainted 6.11.0-rc3-btrfs-for-next #599 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0x5b/0x80 __lock_acquire+0x2798/0x69d0 ? __pfx___lock_acquire+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 lock_acquire+0x19d/0x4a0 ? btrfs_map_block+0x39f/0x2250 ? __pfx_lock_acquire+0x10/0x10 ? find_held_lock+0x2d/0x110 ? lock_is_held_type+0x8f/0x100 down_read+0x8e/0x440 ? btrfs_map_block+0x39f/0x2250 ? __pfx_down_read+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 btrfs_map_block+0x39f/0x2250 ? btrfs_dev_replace_by_ioctl+0xd69/0x1d00 ? btrfs_bio_counter_inc_blocked+0xd9/0x2e0 ? __kasan_slab_alloc+0x6e/0x70 ? __pfx_btrfs_map_block+0x10/0x10 ? __pfx_btrfs_bio_counter_inc_blocked+0x10/0x10 ? kmem_cache_alloc_noprof+0x1f2/0x300 ? mempool_alloc_noprof+0xed/0x2b0 btrfs_submit_chunk+0x28d/0x17e0 ? __pfx_btrfs_submit_chunk+0x10/0x10 ? bvec_alloc+0xd7/0x1b0 ? bio_add_folio+0x171/0x270 ? __pfx_bio_add_folio+0x10/0x10 ? __kasan_check_read+0x20/0x20 btrfs_submit_bio+0x37/0x80 read_extent_buffer_pages+0x3df/0x6c0 btrfs_read_extent_buffer+0x13e/0x5f0 read_tree_block+0x81/0xe0 read_block_for_search+0x4bd/0x7a0 ? __pfx_read_block_for_search+0x10/0x10 btrfs_search_slot+0x78d/0x2720 ? __pfx_btrfs_search_slot+0x10/0x10 ? lock_is_held_type+0x8f/0x100 ? kasan_save_track+0x14/0x30 ? __kasan_slab_alloc+0x6e/0x70 ? kmem_cache_alloc_noprof+0x1f2/0x300 btrfs_get_raid_extent_offset+0x181/0x820 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_btrfs_get_raid_extent_offset+0x10/0x10 ? down_read+0x194/0x440 ? __pfx_down_read+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 btrfs_map_block+0x5b5/0x2250 ? __pfx_btrfs_map_block+0x10/0x10 scrub_submit_initial_read+0x8fe/0x11b0 ? __pfx_scrub_submit_initial_read+0x10/0x10 submit_initial_group_read+0x161/0x3a0 ? lock_release+0x20e/0x710 ? __pfx_submit_initial_group_read+0x10/0x10 ? __pfx_lock_release+0x10/0x10 scrub_simple_mirror.isra.0+0x3eb/0x580 scrub_stripe+0xe4d/0x1440 ? lock_release+0x20e/0x710 ? __pfx_scrub_stripe+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 scrub_chunk+0x257/0x4a0 scrub_enumerate_chunks+0x64c/0xf70 ? __mutex_unlock_slowpath+0x147/0x5f0 ? __pfx_scrub_enumerate_chunks+0x10/0x10 ? bit_wait_timeout+0xb0/0x170 ? __up_read+0x189/0x700 ? scrub_workers_get+0x231/0x300 ? up_write+0x490/0x4f0 btrfs_scrub_dev+0x52e/0xcd0 ? create_pending_snapshots+0x230/0x250 ? __pfx_btrfs_scrub_dev+0x10/0x10 btrfs_dev_replace_by_ioctl+0xd69/0x1d00 ? lock_acquire+0x19d/0x4a0 ? __pfx_btrfs_dev_replace_by_ioctl+0x10/0x10 ? ---truncated---

In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp: fix struct clk leak on probe errors Make sure to release the pipe clock reference in case of a late probe error (e.g. probe deferral).

In the Linux kernel, the following vulnerability has been resolved: ASoC: atmel: Fix error handling in sam9x5_wm8731_driver_probe The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error path.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leak in parse_apply_sb_mount_options() If processing the on-disk mount options fails after any memory was allocated in the ext4_fs_context, e.g. s_qf_names, then this memory is leaked. Fix this by calling ext4_fc_free() instead of kfree() directly. Reproducer: mkfs.ext4 -F /dev/vdc tune2fs /dev/vdc -E mount_opts=usrjquota=file echo clear > /sys/kernel/debug/kmemleak mount /dev/vdc /vdc echo scan > /sys/kernel/debug/kmemleak sleep 5 echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix NULL pointer dereference in mt7996_mcu_sta_bfer_he Fix the NULL pointer dereference in mt7996_mcu_sta_bfer_he routine adding an sta interface to the mt7996 driver. Found by code review.

In the Linux kernel, the following vulnerability has been resolved: ASoC: rockchip: Fix PM usage reference of rockchip_i2s_tdm_resume pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced.

In the Linux kernel, the following vulnerability has been resolved: spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware If the value of max_speed_hz is 0, it may cause a division by zero error in hisi_calc_effective_speed(). The value of max_speed_hz is provided by firmware. Firmware is generally considered as a trusted domain. However, as division by zero errors can cause system failure, for defense measure, the value of max_speed is validated here. So 0 is regarded as invalid and an error code is returned.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: Fix missing of_node_put in mt2701_wm8960_machine_probe This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak.

In the Linux kernel, the following vulnerability has been resolved: bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") leads a NULL pointer deference in cache_set_flush(). 1721 if (!IS_ERR_OR_NULL(c->root)) 1722 list_add(&c->root->list, &c->btree_cache); >From the above code in cache_set_flush(), if previous registration code fails before allocating c->root, it is possible c->root is NULL as what it is initialized. __bch_btree_node_alloc() never returns NULL but c->root is possible to be NULL at above line 1721. This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix inode list leak during backref walking at find_parent_nodes() During backref walking, at find_parent_nodes(), if we are dealing with a data extent and we get an error while resolving the indirect backrefs, at resolve_indirect_refs(), or in the while loop that iterates over the refs in the direct refs rbtree, we end up leaking the inode lists attached to the direct refs we have in the direct refs rbtree that were not yet added to the refs ulist passed as argument to find_parent_nodes(). Since they were not yet added to the refs ulist and prelim_release() does not free the lists, on error the caller can only free the lists attached to the refs that were added to the refs ulist, all the remaining refs get their inode lists never freed, therefore leaking their memory. Fix this by having prelim_release() always free any attached inode list to each ref found in the rbtree, and have find_parent_nodes() set the ref's inode list to NULL once it transfers ownership of the inode list to a ref added to the refs ulist passed to find_parent_nodes().

In the Linux kernel, the following vulnerability has been resolved: ASoC: DPCM: Don't pick up BE without substream When DPCM tries to add valid BE connections at dpcm_add_paths(), it doesn't check whether the picked BE actually supports for the given stream direction. Due to that, when an asymmetric BE stream is present, it picks up wrongly and this may result in a NULL dereference at a later point where the code assumes the existence of a corresponding BE substream. This patch adds the check for the presence of the substream for the target BE for avoiding the problem above. Note that we have already some fix for non-existing BE substream at commit 6246f283d5e0 ("ASoC: dpcm: skip missing substream while applying symmetry"). But the code path we've hit recently is rather happening before the previous fix. So this patch tries to fix at picking up a BE instead of parsing BE lists.

In the Linux kernel, the following vulnerability has been resolved: drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop() There is a deadlock in rtllib_beacons_stop(), which is shown below: (Thread 1) | (Thread 2) | rtllib_send_beacon() rtllib_beacons_stop() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | rtllib_send_beacon_cb() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold ieee->beacon_lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need ieee->beacon_lock in position (2) of thread 2. As a result, rtllib_beacons_stop() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: ralink: Check for null return of devm_kcalloc Because of the possible failure of the allocation, data->domains might be NULL pointer and will cause the dereference of the NULL pointer later. Therefore, it might be better to check it and directly return -ENOMEM without releasing data manually if fails, because the comment of the devm_kmalloc() says "Memory allocated with this function is automatically freed on driver detach.".

In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix UMR pd cleanup on error flow of driver init The cited commit moves the pd allocation from function mlx5r_umr_resource_cleanup() to a new function mlx5r_umr_cleanup(). So the fix in commit [1] is broken. In error flow, will hit panic [2]. Fix it by checking pd pointer to avoid panic if it is NULL; [1] RDMA/mlx5: Fix UMR cleanup on error flow of driver init [2] [ 347.567063] infiniband mlx5_0: Couldn't register device with driver model [ 347.591382] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 347.593438] #PF: supervisor read access in kernel mode [ 347.595176] #PF: error_code(0x0000) - not-present page [ 347.596962] PGD 0 P4D 0 [ 347.601361] RIP: 0010:ib_dealloc_pd_user+0x12/0xc0 [ib_core] [ 347.604171] RSP: 0018:ffff888106293b10 EFLAGS: 00010282 [ 347.604834] RAX: 0000000000000000 RBX: 000000000000000e RCX: 0000000000000000 [ 347.605672] RDX: ffff888106293ad0 RSI: 0000000000000000 RDI: 0000000000000000 [ 347.606529] RBP: 0000000000000000 R08: ffff888106293ae0 R09: ffff888106293ae0 [ 347.607379] R10: 0000000000000a06 R11: 0000000000000000 R12: 0000000000000000 [ 347.608224] R13: ffffffffa0704dc0 R14: 0000000000000001 R15: 0000000000000001 [ 347.609067] FS: 00007fdc720cd9c0(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000 [ 347.610094] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 347.610727] CR2: 0000000000000020 CR3: 0000000103012003 CR4: 0000000000370eb0 [ 347.611421] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 347.612113] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 347.612804] Call Trace: [ 347.613130] <TASK> [ 347.613417] ? __die+0x20/0x60 [ 347.613793] ? page_fault_oops+0x150/0x3e0 [ 347.614243] ? free_msg+0x68/0x80 [mlx5_core] [ 347.614840] ? cmd_exec+0x48f/0x11d0 [mlx5_core] [ 347.615359] ? exc_page_fault+0x74/0x130 [ 347.615808] ? asm_exc_page_fault+0x22/0x30 [ 347.616273] ? ib_dealloc_pd_user+0x12/0xc0 [ib_core] [ 347.616801] mlx5r_umr_cleanup+0x23/0x90 [mlx5_ib] [ 347.617365] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x36/0x40 [mlx5_ib] [ 347.618025] __mlx5_ib_add+0x96/0xd0 [mlx5_ib] [ 347.618539] mlx5r_probe+0xe9/0x310 [mlx5_ib] [ 347.619032] ? kernfs_add_one+0x107/0x150 [ 347.619478] ? __mlx5_ib_add+0xd0/0xd0 [mlx5_ib] [ 347.619984] auxiliary_bus_probe+0x3e/0x90 [ 347.620448] really_probe+0xc5/0x3a0 [ 347.620857] __driver_probe_device+0x80/0x160 [ 347.621325] driver_probe_device+0x1e/0x90 [ 347.621770] __driver_attach+0xec/0x1c0 [ 347.622213] ? __device_attach_driver+0x100/0x100 [ 347.622724] bus_for_each_dev+0x71/0xc0 [ 347.623151] bus_add_driver+0xed/0x240 [ 347.623570] driver_register+0x58/0x100 [ 347.623998] __auxiliary_driver_register+0x6a/0xc0 [ 347.624499] ? driver_register+0xae/0x100 [ 347.624940] ? 0xffffffffa0893000 [ 347.625329] mlx5_ib_init+0x16a/0x1e0 [mlx5_ib] [ 347.625845] do_one_initcall+0x4a/0x2a0 [ 347.626273] ? gcov_event+0x2e2/0x3a0 [ 347.626706] do_init_module+0x8a/0x260 [ 347.627126] init_module_from_file+0x8b/0xd0 [ 347.627596] __x64_sys_finit_module+0x1ca/0x2f0 [ 347.628089] do_syscall_64+0x4c/0x100

In the Linux kernel, the following vulnerability has been resolved: linux/dim: Fix divide by 0 in RDMA DIM Fix a divide 0 error in rdma_dim_stats_compare() when prev->cpe_ratio == 0. CallTrace: Hardware name: H3C R4900 G3/RS33M2C9S, BIOS 2.00.37P21 03/12/2020 task: ffff880194b78000 task.stack: ffffc90006714000 RIP: 0010:backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: 0018:ffff880c10e83ec0 EFLAGS: 00010202 RAX: 0000000000002710 RBX: ffff88096cd7f780 RCX: 0000000000000064 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 000000001d7c6c09 R13: ffff88096cd7f780 R14: ffff880b174fe800 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880c10e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000a0965b00 CR3: 000000000200a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ib_poll_handler+0x43/0x80 [ib_core] irq_poll_softirq+0xae/0x110 __do_softirq+0xd1/0x28c irq_exit+0xde/0xf0 do_IRQ+0x54/0xe0 common_interrupt+0x8f/0x8f </IRQ> ? cpuidle_enter_state+0xd9/0x2a0 ? cpuidle_enter_state+0xc7/0x2a0 ? do_idle+0x170/0x1d0 ? cpu_startup_entry+0x6f/0x80 ? start_secondary+0x1b9/0x210 ? secondary_startup_64+0xa5/0xb0 Code: 0f 87 e1 00 00 00 8b 4c 24 14 44 8b 43 14 89 c8 4d 63 c8 44 29 c0 99 31 d0 29 d0 31 d2 48 98 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <49> f7 f1 48 83 f8 0a 0f 86 c1 00 00 00 44 39 c1 7f 10 48 89 df RIP: backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: ffff880c10e83ec0

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix null-ptr-deref in ib_core_cleanup() KASAN reported a null-ptr-deref error: KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] CPU: 1 PID: 379 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:destroy_workqueue+0x2f/0x740 RSP: 0018:ffff888016137df8 EFLAGS: 00000202 ... Call Trace: ib_core_cleanup+0xa/0xa1 [ib_core] __do_sys_delete_module.constprop.0+0x34f/0x5b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fa1a0d221b7 ... It is because the fail of roce_gid_mgmt_init() is ignored: ib_core_init() roce_gid_mgmt_init() gid_cache_wq = alloc_ordered_workqueue # fail ... ib_core_cleanup() roce_gid_mgmt_cleanup() destroy_workqueue(gid_cache_wq) # destroy an unallocated wq Fix this by catching the fail of roce_gid_mgmt_init() in ib_core_init().

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Check for null pointer of pointer substream before dereferencing it Pointer substream is being dereferenced on the assignment of pointer card before substream is being null checked with the macro PCM_RUNTIME_CHECK. Although PCM_RUNTIME_CHECK calls BUG_ON, it still is useful to perform the the pointer check before card is assigned.

In the Linux kernel, the following vulnerability has been resolved: tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd() test_gen_kprobe_cmd() only free buf in fail path, hence buf will leak when there is no failure. Move kfree(buf) from fail path to common path to prevent the memleak. The same reason and solution in test_gen_kretprobe_cmd(). unreferenced object 0xffff888143b14000 (size 2048): comm "insmod", pid 52490, jiffies 4301890980 (age 40.553s) hex dump (first 32 bytes): 70 3a 6b 70 72 6f 62 65 73 2f 67 65 6e 5f 6b 70 p:kprobes/gen_kp 72 6f 62 65 5f 74 65 73 74 20 64 6f 5f 73 79 73 robe_test do_sys backtrace: [<000000006d7b836b>] kmalloc_trace+0x27/0xa0 [<0000000009528b5b>] 0xffffffffa059006f [<000000008408b580>] do_one_initcall+0x87/0x2a0 [<00000000c4980a7e>] do_init_module+0xdf/0x320 [<00000000d775aad0>] load_module+0x3006/0x3390 [<00000000e9a74b80>] __do_sys_finit_module+0x113/0x1b0 [<000000003726480d>] do_syscall_64+0x35/0x80 [<000000003441e93b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix null pointer dereference of pointer perfmon In the unlikely event that pointer perfmon is null the WARN_ON return path occurs after the pointer has already been deferenced. Fix this by only dereferencing perfmon after it has been null checked.

In the Linux kernel, the following vulnerability has been resolved: bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem The vmemmap pages is marked by kmemleak when allocated from memblock. Remove it from kmemleak when freeing the page. Otherwise, when we reuse the page, kmemleak may report such an error and then stop working. kmemleak: Cannot insert 0xffff98fb6eab3d40 into the object search tree (overlaps existing) kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff98fb6be00000 (size 335544320): kmemleak: comm "swapper", pid 0, jiffies 4294892296 kmemleak: min_count = 0 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace:

In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Add missing of_node_put in iommu_init_early_dart The device_node pointer is returned by of_find_compatible_node with refcount incremented. We should use of_node_put() to avoid the refcount leak.

In the Linux kernel, the following vulnerability has been resolved: spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers In case a IRQ based transfer times out the bcm2835_spi_handle_err() function is called. Since commit 1513ceee70f2 ("spi: bcm2835: Drop dma_pending flag") the TX and RX DMA transfers are unconditionally canceled, leading to NULL pointer derefs if ctlr->dma_tx or ctlr->dma_rx are not set. Fix the NULL pointer deref by checking that ctlr->dma_tx and ctlr->dma_rx are valid pointers before accessing them.

In the Linux kernel, the following vulnerability has been resolved: rtl818x: Prevent using not initialized queues Using not existing queues can panic the kernel with rtl8180/rtl8185 cards. Ignore the skb priority for those cards, they only have one tx queue. Pierre Asselin (pa@panix.com) reported the kernel crash in the Gentoo forum: https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start-25.html He also confirmed that this patch fixes the issue. In summary this happened: After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a "divide error: 0000" when connecting to an AP. Control port tx now tries to use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in 2.10. Since only the rtl8187se part of the driver supports QoS, the priority of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185 cards. rtl8180 is then unconditionally reading out the priority and finally crashes on drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this patch: idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries "ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got initialized.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: mhi: fix memory leak in mhi_mbim_dellink MHI driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice().

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-axi-dmac: ignore interrupt if no descriptor If the channel has no descriptor and the interrupt is raised then the kernel will OOPS. Check the result of vchan_next_desc() in the handler axi_chan_block_xfer_complete() to avoid the error happening.

In the Linux kernel, the following vulnerability has been resolved: PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0) Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0 (SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an inbound PCIe TLP spans more than two internal AXI 128-byte bursts, the bus may corrupt the packet payload and the corrupt data may cause associated applications or the processor to hang. The workaround for Errata #i2037 is to limit the maximum read request size and maximum payload size to 128 bytes. Add workaround for Errata #i2037 here. The errata and workaround is applicable only to AM65x SR 1.0 and later versions of the silicon will have this fixed. [1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf

In the Linux kernel, the following vulnerability has been resolved: mm/uffd: fix pte marker when fork() without fork event Patch series "mm: Fixes on pte markers". Patch 1 resolves the syzkiller report from Pengfei. Patch 2 further harden pte markers when used with the recent swapin error markers. The major case is we should persist a swapin error marker after fork(), so child shouldn't read a corrupted page. This patch (of 2): When fork(), dst_vma is not guaranteed to have VM_UFFD_WP even if src may have it and has pte marker installed. The warning is improper along with the comment. The right thing is to inherit the pte marker when needed, or keep the dst pte empty. A vague guess is this happened by an accident when there's the prior patch to introduce src/dst vma into this helper during the uffd-wp feature got developed and I probably messed up in the rebase, since if we replace dst_vma with src_vma the warning & comment it all makes sense too. Hugetlb did exactly the right here (copy_hugetlb_page_range()). Fix the general path. Reproducer: https://github.com/xupengfe/syzkaller_logs/blob/main/221208_115556_copy_page_range/repro.c Bugzilla report: https://bugzilla.kernel.org/show_bug.cgi?id=216808

In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: fix possible memory leak in mousevsc_probe() If hid_add_device() returns error, it should call hid_destroy_device() to free hid_dev which is allocated in hid_allocate_device().

In the Linux kernel, the following vulnerability has been resolved: NFSD: prevent underflow in nfssvc_decode_writeargs() Smatch complains: fs/nfsd/nfsxdr.c:341 nfssvc_decode_writeargs() warn: no lower bound on 'args->len' Change the type to unsigned to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix VP8 stateless decoder smatch warning Fix a smatch static checker warning on vdec_vp8_req_if.c. Which leads to a kernel crash when fb is NULL.

In the Linux kernel, the following vulnerability has been resolved: Input: sparcspkr - fix refcount leak in bbc_beep_probe of_find_node_by_path() calls of_find_node_opts_by_path(), which returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.