In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix uaf in ath12k_core_init() When the execution of ath12k_core_hw_group_assign() or ath12k_core_hw_group_create() fails, the registered notifier chain is not unregistered properly. Its memory is freed after rmmod, which may trigger to a use-after-free (UAF) issue if there is a subsequent access to this notifier chain. Fixes the issue by calling ath12k_core_panic_notifier_unregister() in failure cases. Call trace: notifier_chain_register+0x4c/0x1f0 (P) atomic_notifier_chain_register+0x38/0x68 ath12k_core_init+0x50/0x4e8 [ath12k] ath12k_pci_probe+0x5f8/0xc28 [ath12k] pci_device_probe+0xbc/0x1a8 really_probe+0xc8/0x3a0 __driver_probe_device+0x84/0x1b0 driver_probe_device+0x44/0x130 __driver_attach+0xcc/0x208 bus_for_each_dev+0x84/0x100 driver_attach+0x2c/0x40 bus_add_driver+0x130/0x260 driver_register+0x70/0x138 __pci_register_driver+0x68/0x80 ath12k_pci_init+0x30/0x68 [ath12k] ath12k_init+0x28/0x78 [ath12k] Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: net: atm: fix /proc/net/atm/lec handling /proc/net/atm/lec must ensure safety against dev_lec[] changes. It appears it had dev_put() calls without prior dev_hold(), leading to imbalance and UAF.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Avoid potential ndlp use-after-free in dev_loss_tmo_callbk Smatch detected a potential use-after-free of an ndlp oject in dev_loss_tmo_callbk during driver unload or fatal error handling. Fix by reordering code to avoid potential use-after-free if initial nodelist reference has been previously removed.

In the Linux kernel, the following vulnerability has been resolved: net_sched: qfq: Fix double list add in class with netem as child qdisc As described in Gerrard's report [1], there are use cases where a netem child qdisc will make the parent qdisc's enqueue callback reentrant. In the case of qfq, there won't be a UAF, but the code will add the same classifier to the list twice, which will cause memory corruption. This patch checks whether the class was already added to the agg->active list (cl_is_active) before doing the addition to cater for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Fix the dead loop of MPLS parse The unexpected MPLS packet may not end with the bottom label stack. When there are many stacks, The label count value has wrapped around. A dead loop occurs, soft lockup/CPU stuck finally. stack backtrace: UBSAN: array-index-out-of-bounds in /build/linux-0Pa0xK/linux-5.15.0/net/openvswitch/flow.c:662:26 index -1 is out of range for type '__be32 [3]' CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Tainted: G OE 5.15.0-121-generic #131-Ubuntu Hardware name: Dell Inc. PowerEdge C6420/0JP9TF, BIOS 2.12.2 07/14/2021 Call Trace: <IRQ> show_stack+0x52/0x5c dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_out_of_bounds.cold+0x44/0x49 key_extract_l3l4+0x82a/0x840 [openvswitch] ? kfree_skbmem+0x52/0xa0 key_extract+0x9c/0x2b0 [openvswitch] ovs_flow_key_extract+0x124/0x350 [openvswitch] ovs_vport_receive+0x61/0xd0 [openvswitch] ? kernel_init_free_pages.part.0+0x4a/0x70 ? get_page_from_freelist+0x353/0x540 netdev_port_receive+0xc4/0x180 [openvswitch] ? netdev_port_receive+0x180/0x180 [openvswitch] netdev_frame_hook+0x1f/0x40 [openvswitch] __netif_receive_skb_core.constprop.0+0x23a/0xf00 __netif_receive_skb_list_core+0xfa/0x240 netif_receive_skb_list_internal+0x18e/0x2a0 napi_complete_done+0x7a/0x1c0 bnxt_poll+0x155/0x1c0 [bnxt_en] __napi_poll+0x30/0x180 net_rx_action+0x126/0x280 ? bnxt_msix+0x67/0x80 [bnxt_en] handle_softirqs+0xda/0x2d0 irq_exit_rcu+0x96/0xc0 common_interrupt+0x8e/0xa0 </IRQ>

In the Linux kernel, the following vulnerability has been resolved: crypto: algif_hash - fix double free in hash_accept If accept(2) is called on socket type algif_hash with MSG_MORE flag set and crypto_ahash_import fails, sk2 is freed. However, it is also freed in af_alg_release, leading to slab-use-after-free error.

In the Linux kernel, the following vulnerability has been resolved: fbcon: Make sure modelist not set on unregistered console It looks like attempting to write to the "store_modes" sysfs node will run afoul of unregistered consoles: UBSAN: array-index-out-of-bounds in drivers/video/fbdev/core/fbcon.c:122:28 index -1 is out of range for type 'fb_info *[32]' ... fbcon_info_from_console+0x192/0x1a0 drivers/video/fbdev/core/fbcon.c:122 fbcon_new_modelist+0xbf/0x2d0 drivers/video/fbdev/core/fbcon.c:3048 fb_new_modelist+0x328/0x440 drivers/video/fbdev/core/fbmem.c:673 store_modes+0x1c9/0x3e0 drivers/video/fbdev/core/fbsysfs.c:113 dev_attr_store+0x55/0x80 drivers/base/core.c:2439 static struct fb_info *fbcon_registered_fb[FB_MAX]; ... static signed char con2fb_map[MAX_NR_CONSOLES]; ... static struct fb_info *fbcon_info_from_console(int console) ... return fbcon_registered_fb[con2fb_map[console]]; If con2fb_map contains a -1 things go wrong here. Instead, return NULL, as callers of fbcon_info_from_console() are trying to compare against existing "info" pointers, so error handling should kick in correctly.

In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Prevent overflow in size calculation for memdup_user() Number of apqn target list entries contained in 'nr_apqns' variable is determined by userspace via an ioctl call so the result of the product in calculation of size passed to memdup_user() may overflow. In this case the actual size of the allocated area and the value describing it won't be in sync leading to various types of unpredictable behaviour later. Use a proper memdup_array_user() helper which returns an error if an overflow is detected. Note that it is different from when nr_apqns is initially zero - that case is considered valid and should be handled in subsequent pkey_handler implementations. Found by Linux Verification Center (linuxtesting.org).

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad4851: fix ad4858 chan pointer handling The pointer returned from ad4851_parse_channels_common() is incremented internally as each channel is populated. In ad4858_parse_channels(), the same pointer was further incremented while setting ext_scan_type fields for each channel. This resulted in indio_dev->channels being set to a pointer past the end of the allocated array, potentially causing memory corruption or undefined behavior. Fix this by iterating over the channels using an explicit index instead of incrementing the pointer. This preserves the original base pointer and ensures all channel metadata is set correctly.

In the Linux kernel, the following vulnerability has been resolved: ublk: santizize the arguments from userspace when adding a device Sanity check the values for queue depth and number of queues we get from userspace when adding a device.

In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devices Maximum OTP and EEPROM size for hearthstone PCI1xxxx devices are 8 Kb and 64 Kb respectively. Adjust max size definitions and return correct EEPROM length based on device. Also prevent out-of-bound read/write.

A use-after-free exists in the Linux Kernel in tc_new_tfilter that could allow a local attacker to gain privilege escalation. The exploit requires unprivileged user namespaces. We recommend upgrading past commit 04c2a47ffb13c29778e2a14e414ad4cb5a5db4b5

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Use local fence in error path of xe_migrate_clear The intent of the error path in xe_migrate_clear is to wait on locally generated fence and then return. The code is waiting on m->fence which could be the local fence but this is only stable under the job mutex leading to a possible UAF. Fix code to wait on local fence. (cherry picked from commit 762b7e95362170b3e13a8704f38d5e47eca4ba74)

In the Linux kernel, the following vulnerability has been resolved: sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue() When enqueuing the first packet to an HFSC class, hfsc_enqueue() calls the child qdisc's peek() operation before incrementing sch->q.qlen and sch->qstats.backlog. If the child qdisc uses qdisc_peek_dequeued(), this may trigger an immediate dequeue and potential packet drop. In such cases, qdisc_tree_reduce_backlog() is called, but the HFSC qdisc's qlen and backlog have not yet been updated, leading to inconsistent queue accounting. This can leave an empty HFSC class in the active list, causing further consequences like use-after-free. This patch fixes the bug by moving the increment of sch->q.qlen and sch->qstats.backlog before the call to the child qdisc's peek() operation. This ensures that queue length and backlog are always accurate when packet drops or dequeues are triggered during the peek.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request Make sure that n_channels is set after allocating the struct cfg80211_registered_device::int_scan_req member. Seen with syzkaller: UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5 index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]') This was missed in the initial conversions because I failed to locate the allocation likely due to the "sizeof(void *)" not matching the "channels" array type.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue When the task management thread processes reply queues while the reset thread resets them, the task management thread accesses an invalid queue ID (0xFFFF), set by the reset thread, which points to unallocated memory, causing a crash. Add flag 'io_admin_reset_sync' to synchronize access between the reset, I/O, and admin threads. Before a reset, the reset handler sets this flag to block I/O and admin processing threads. If any thread bypasses the initial check, the reset thread waits up to 10 seconds for processing to finish. If the wait exceeds 10 seconds, the controller is marked as unrecoverable.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix isochronous Ring Underrun/Overrun event handling The TRB pointer of these events points at enqueue at the time of error occurrence on xHCI 1.1+ HCs or it's NULL on older ones. By the time we are handling the event, a new TD may be queued at this ring position. I can trigger this race by rising interrupt moderation to increase IRQ handling delay. Similar delay may occur naturally due to system load. If this ever happens after a Missed Service Error, missed TDs will be skipped and the new TD processed as if it matched the event. It could be given back prematurely, risking data loss or buffer UAF by the xHC. Don't complete TDs on xrun events and don't warn if queued TDs don't match the event's TRB pointer, which can be NULL or a link/no-op TRB. Don't warn if there are no queued TDs at all. Now that it's safe, also handle xrun events if the skip flag is clear. This ensures completion of any TD stuck in 'error mid TD' state right before the xrun event, which could happen if a driver submits a finite number of URBs to a buggy HC and then an error occurs on the last TD.

In the Linux kernel, the following vulnerability has been resolved: net/sched: fix use-after-free in taprio_dev_notifier Since taprio’s taprio_dev_notifier() isn’t protected by an RCU read-side critical section, a race with advance_sched() can lead to a use-after-free. Adding rcu_read_lock() inside taprio_dev_notifier() prevents this.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Restore context entry setup order for aliased devices Commit 2031c469f816 ("iommu/vt-d: Add support for static identity domain") changed the context entry setup during domain attachment from a set-and-check policy to a clear-and-reset approach. This inadvertently introduced a regression affecting PCI aliased devices behind PCIe-to-PCI bridges. Specifically, keyboard and touchpad stopped working on several Apple Macbooks with below messages: kernel: platform pxa2xx-spi.3: Adding to iommu group 20 kernel: input: Apple SPI Keyboard as /devices/pci0000:00/0000:00:1e.3/pxa2xx-spi.3/spi_master/spi2/spi-APP000D:00/input/input0 kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00 kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: DMAR: DRHD: handling fault status reg 3 kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00 Fix this by restoring the previous context setup order.

In the Linux kernel, the following vulnerability has been resolved: coresight: prevent deactivate active config while enabling the config While enable active config via cscfg_csdev_enable_active_config(), active config could be deactivated via configfs' sysfs interface. This could make UAF issue in below scenario: CPU0 CPU1 (sysfs enable) load module cscfg_load_config_sets() activate config. // sysfs (sys_active_cnt == 1) ... cscfg_csdev_enable_active_config() lock(csdev->cscfg_csdev_lock) // here load config activate by CPU1 unlock(csdev->cscfg_csdev_lock) deactivate config // sysfs (sys_activec_cnt == 0) cscfg_unload_config_sets() unload module // access to config_desc which freed // while unloading module. cscfg_csdev_enable_config To address this, use cscfg_config_desc's active_cnt as a reference count which will be holded when - activate the config. - enable the activated config. and put the module reference when config_active_cnt == 0.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix UAF in __close_file_table_ids A use-after-free is possible if one thread destroys the file via __ksmbd_close_fd while another thread holds a reference to it. The existing checks on fp->refcount are not sufficient to prevent this. The fix takes ft->lock around the section which removes the file from the file table. This prevents two threads acquiring the same file pointer via __close_file_table_ids, as well as the other functions which retrieve a file from the IDR and which already use this same lock.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in kerberos authentication Setting sess->user = NULL was introduced to fix the dangling pointer created by ksmbd_free_user. However, it is possible another thread could be operating on the session and make use of sess->user after it has been passed to ksmbd_free_user but before sess->user is set to NULL.

In the Linux kernel, the following vulnerability has been resolved: wifi: at76c50x: fix use after free access in at76_disconnect The memory pointed to by priv is freed at the end of at76_delete_device function (using ieee80211_free_hw). But the code then accesses the udev field of the freed object to put the USB device. This may also lead to a memory leak of the usb device. Fix this by using udev from interface.

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: remove tag set when second admin queue config fails Commit 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure concatenation") modified nvme_tcp_setup_ctrl() to call nvme_tcp_configure_admin_queue() twice. The first call prepares for DH-CHAP negotitation, and the second call is required for secure concatenation. However, this change triggered BUG KASAN slab-use-after- free in blk_mq_queue_tag_busy_iter(). This BUG can be recreated by repeating the blktests test case nvme/063 a few times [1]. When the BUG happens, nvme_tcp_create_ctrl() fails in the call chain below: nvme_tcp_create_ctrl() nvme_tcp_alloc_ctrl() new=true ... Alloc nvme_tcp_ctrl and admin_tag_set nvme_tcp_setup_ctrl() new=true nvme_tcp_configure_admin_queue() new=true ... Succeed nvme_alloc_admin_tag_set() ... Alloc the tag set for admin_tag_set nvme_stop_keep_alive() nvme_tcp_teardown_admin_queue() remove=false nvme_tcp_configure_admin_queue() new=false nvme_tcp_alloc_admin_queue() ... Fail, but do not call nvme_remove_admin_tag_set() nvme_uninit_ctrl() nvme_put_ctrl() ... Free up the nvme_tcp_ctrl and admin_tag_set The first call of nvme_tcp_configure_admin_queue() succeeds with new=true argument. The second call fails with new=false argument. This second call does not call nvme_remove_admin_tag_set() on failure, due to the new=false argument. Then the admin tag set is not removed. However, nvme_tcp_create_ctrl() assumes that nvme_tcp_setup_ctrl() would call nvme_remove_admin_tag_set(). Then it frees up struct nvme_tcp_ctrl which has admin_tag_set field. Later on, the timeout handler accesses the admin_tag_set field and causes the BUG KASAN slab-use-after-free. To not leave the admin tag set, call nvme_remove_admin_tag_set() when the second nvme_tcp_configure_admin_queue() call fails. Do not return from nvme_tcp_setup_ctrl() on failure. Instead, jump to "destroy_admin" go-to label to call nvme_tcp_teardown_admin_queue() which calls nvme_remove_admin_tag_set().

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix mode1 reset crash issue If HW scheduler hangs and mode1 reset is used to recover GPU, KFD signal user space to abort the processes. After process abort exit, user queues still use the GPU to access system memory before h/w is reset while KFD cleanup worker free system memory and free VRAM. There is use-after-free race bug that KFD allocate and reuse the freed system memory, and user queue write to the same system memory to corrupt the data structure and cause driver crash. To fix this race, KFD cleanup worker terminate user queues, then flush reset_domain wq to wait for any GPU ongoing reset complete, and then free outstanding BOs.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Reset IRTE to host control if *new* route isn't postable Restore an IRTE back to host control (remapped or posted MSI mode) if the *new* GSI route prevents posting the IRQ directly to a vCPU, regardless of the GSI routing type. Updating the IRTE if and only if the new GSI is an MSI results in KVM leaving an IRTE posting to a vCPU. The dangling IRTE can result in interrupts being incorrectly delivered to the guest, and in the worst case scenario can result in use-after-free, e.g. if the VM is torn down, but the underlying host IRQ isn't freed.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Fix timeline left held on VMA alloc error The following error has been reported sporadically by CI when a test unbinds the i915 driver on a ring submission platform: <4> [239.330153] ------------[ cut here ]------------ <4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count) <4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330942] Call Trace: <4> [239.330944] <TASK> <4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915] <4> [239.331202] i915_driver_release+0x86/0xa0 [i915] <4> [239.331482] devm_drm_dev_init_release+0x61/0x90 <4> [239.331494] devm_action_release+0x15/0x30 <4> [239.331504] release_nodes+0x3d/0x120 <4> [239.331517] devres_release_all+0x96/0xd0 <4> [239.331533] device_unbind_cleanup+0x12/0x80 <4> [239.331543] device_release_driver_internal+0x23a/0x280 <4> [239.331550] ? bus_find_device+0xa5/0xe0 <4> [239.331563] device_driver_detach+0x14/0x20 ... <4> [357.719679] ---[ end trace 0000000000000000 ]--- If the test also unloads the i915 module then that's followed with: <3> [357.787478] ============================================================================= <3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown() <3> [357.788031] ----------------------------------------------------------------------------- <3> [357.788204] Object 0xffff888109e7f480 @offset=29824 <3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244 <4> [357.788994] i915_vma_instance+0xee/0xc10 [i915] <4> [357.789290] init_status_page+0x7b/0x420 [i915] <4> [357.789532] intel_engines_init+0x1d8/0x980 [i915] <4> [357.789772] intel_gt_init+0x175/0x450 [i915] <4> [357.790014] i915_gem_init+0x113/0x340 [i915] <4> [357.790281] i915_driver_probe+0x847/0xed0 [i915] <4> [357.790504] i915_pci_probe+0xe6/0x220 [i915] ... Closer analysis of CI results history has revealed a dependency of the error on a few IGT tests, namely: - igt@api_intel_allocator@fork-simple-stress-signal, - igt@api_intel_allocator@two-level-inception-interruptible, - igt@gem_linear_blits@interruptible, - igt@prime_mmap_coherency@ioctl-errors, which invisibly trigger the issue, then exhibited with first driver unbind attempt. All of the above tests perform actions which are actively interrupted with signals. Further debugging has allowed to narrow that scope down to DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring submission, in particular. If successful then that function, or its execlists or GuC submission equivalent, is supposed to be called only once per GEM context engine, followed by raise of a flag that prevents the function from being called again. The function is expected to unwind its internal errors itself, so it may be safely called once more after it returns an error. In case of ring submission, the function first gets a reference to the engine's legacy timeline and then allocates a VMA. If the VMA allocation fails, e.g. when i915_vma_instance() called from inside is interrupted with a signal, then ring_context_alloc() fails, leaving the timeline held referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the timeline is got, and only that last one is put on successful completion. As a consequence, the legacy timeline, with its underlying engine status page's VMA object, is still held and not released on driver unbind. Get the legacy timeline only after successful allocation of the context engine's VMA. v2: Add a note on other submission methods (Krzysztof Karas): Both execlists and GuC submission use lrc_alloc() which seems free from a similar issue. (cherry picked from commit cc43422b3cc79eacff4c5a8ba0d224688ca9dd4f)

In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix infinite recursive call of clip_push(). syzbot reported the splat below. [0] This happens if we call ioctl(ATMARP_MKIP) more than once. During the first call, clip_mkip() sets clip_push() to vcc->push(), and the second call copies it to clip_vcc->old_push(). Later, when the socket is close()d, vcc_destroy_socket() passes NULL skb to clip_push(), which calls clip_vcc->old_push(), triggering the infinite recursion. Let's prevent the second ioctl(ATMARP_MKIP) by checking vcc->user_back, which is allocated by the first call as clip_vcc. Note also that we use lock_sock() to prevent racy calls. [0]: BUG: TASK stack guard page was hit at ffffc9000d66fff8 (stack is ffffc9000d670000..ffffc9000d678000) Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted 6.16.0-rc4-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:clip_push+0x5/0x720 net/atm/clip.c:191 Code: e0 8f aa 8c e8 1c ad 5b fa eb ae 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 <41> 57 41 56 41 55 41 54 53 48 83 ec 20 48 89 f3 49 89 fd 48 bd 00 RSP: 0018:ffffc9000d670000 EFLAGS: 00010246 RAX: 1ffff1100235a4a5 RBX: ffff888011ad2508 RCX: ffff8880003c0000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888037f01000 RBP: dffffc0000000000 R08: ffffffff8fa104f7 R09: 1ffffffff1f4209e R10: dffffc0000000000 R11: ffffffff8a99b300 R12: ffffffff8a99b300 R13: ffff888037f01000 R14: ffff888011ad2500 R15: ffff888037f01578 FS: 000055557ab6d500(0000) GS:ffff88808d250000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d66fff8 CR3: 0000000043172000 CR4: 0000000000352ef0 Call Trace: <TASK> clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 ... clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 vcc_destroy_socket net/atm/common.c:183 [inline] vcc_release+0x157/0x460 net/atm/common.c:205 __sock_release net/socket.c:647 [inline] sock_close+0xc0/0x240 net/socket.c:1391 __fput+0x449/0xa70 fs/file_table.c:465 task_work_run+0x1d1/0x260 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xec/0x110 kernel/entry/common.c:114 exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline] do_syscall_64+0x2bd/0x3b0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff31c98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffb5aa1f78 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 0000000000012747 RCX: 00007ff31c98e929 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007ff31cbb7ba0 R08: 0000000000000001 R09: 0000000db5aa226f R10: 00007ff31c7ff030 R11: 0000000000000246 R12: 00007ff31cbb608c R13: 00007ff31cbb6080 R14: ffffffffffffffff R15: 00007fffb5aa2090 </TASK> Modules linked in:

In the Linux kernel, the following vulnerability has been resolved: binder: fix use-after-free in binderfs_evict_inode() Running 'stress-ng --binderfs 16 --timeout 300' under KASAN-enabled kernel, I've noticed the following: BUG: KASAN: slab-use-after-free in binderfs_evict_inode+0x1de/0x2d0 Write of size 8 at addr ffff88807379bc08 by task stress-ng-binde/1699 CPU: 0 UID: 0 PID: 1699 Comm: stress-ng-binde Not tainted 6.14.0-rc7-g586de92313fc-dirty #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1c2/0x2a0 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 print_report+0x155/0x840 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 ? __phys_addr+0xba/0x170 ? binderfs_evict_inode+0x1de/0x2d0 kasan_report+0x147/0x180 ? binderfs_evict_inode+0x1de/0x2d0 binderfs_evict_inode+0x1de/0x2d0 ? __pfx_binderfs_evict_inode+0x10/0x10 evict+0x524/0x9f0 ? __pfx_lock_release+0x10/0x10 ? __pfx_evict+0x10/0x10 ? do_raw_spin_unlock+0x4d/0x210 ? _raw_spin_unlock+0x28/0x50 ? iput+0x697/0x9b0 __dentry_kill+0x209/0x660 ? shrink_kill+0x8d/0x2c0 shrink_kill+0xa9/0x2c0 shrink_dentry_list+0x2e0/0x5e0 shrink_dcache_parent+0xa2/0x2c0 ? __pfx_shrink_dcache_parent+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 do_one_tree+0x23/0xe0 shrink_dcache_for_umount+0xa0/0x170 generic_shutdown_super+0x67/0x390 kill_litter_super+0x76/0xb0 binderfs_kill_super+0x44/0x90 deactivate_locked_super+0xb9/0x130 cleanup_mnt+0x422/0x4c0 ? lockdep_hardirqs_on+0x9d/0x150 task_work_run+0x1d2/0x260 ? __pfx_task_work_run+0x10/0x10 resume_user_mode_work+0x52/0x60 syscall_exit_to_user_mode+0x9a/0x120 do_syscall_64+0x103/0x210 ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0xcac57b Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8 RSP: 002b:00007ffecf4226a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 00007ffecf422720 RCX: 0000000000cac57b RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ffecf422850 RBP: 00007ffecf422850 R08: 0000000028d06ab1 R09: 7fffffffffffffff R10: 3fffffffffffffff R11: 0000000000000246 R12: 00007ffecf422718 R13: 00007ffecf422710 R14: 00007f478f87b658 R15: 00007ffecf422830 </TASK> Allocated by task 1705: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x213/0x3e0 binderfs_binder_device_create+0x183/0xa80 binder_ctl_ioctl+0x138/0x190 __x64_sys_ioctl+0x120/0x1b0 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1705: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x46/0x50 __kasan_slab_free+0x62/0x70 kfree+0x194/0x440 evict+0x524/0x9f0 do_unlinkat+0x390/0x5b0 __x64_sys_unlink+0x47/0x50 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f This 'stress-ng' workload causes the concurrent deletions from 'binder_devices' and so requires full-featured synchronization to prevent list corruption. I've found this issue independently but pretty sure that syzbot did the same, so Reported-by: and Closes: should be applicable here as well.

In the Linux kernel, the following vulnerability has been resolved: rose: fix dangling neighbour pointers in rose_rt_device_down() There are two bugs in rose_rt_device_down() that can cause use-after-free: 1. The loop bound `t->count` is modified within the loop, which can cause the loop to terminate early and miss some entries. 2. When removing an entry from the neighbour array, the subsequent entries are moved up to fill the gap, but the loop index `i` is still incremented, causing the next entry to be skipped. For example, if a node has three neighbours (A, A, B) with count=3 and A is being removed, the second A is not checked. i=0: (A, A, B) -> (A, B) with count=2 ^ checked i=1: (A, B) -> (A, B) with count=2 ^ checked (B, not A!) i=2: (doesn't occur because i < count is false) This leaves the second A in the array with count=2, but the rose_neigh structure has been freed. Code that accesses these entries assumes that the first `count` entries are valid pointers, causing a use-after-free when it accesses the dangling pointer. Fix both issues by iterating over the array in reverse order with a fixed loop bound. This ensures that all entries are examined and that the removal of an entry doesn't affect subsequent iterations.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix ECVF vports unload on shutdown flow Fix shutdown flow UAF when a virtual function is created on the embedded chip (ECVF) of a BlueField device. In such case the vport acl ingress table is not properly destroyed. ECVF functionality is independent of ecpf_vport_exists capability and thus functions mlx5_eswitch_(enable|disable)_pf_vf_vports() should not test it when enabling/disabling ECVF vports. kernel log: [] refcount_t: underflow; use-after-free. [] WARNING: CPU: 3 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0x124/0x220 ---------------- [] Call trace: [] refcount_warn_saturate+0x124/0x220 [] tree_put_node+0x164/0x1e0 [mlx5_core] [] mlx5_destroy_flow_table+0x98/0x2c0 [mlx5_core] [] esw_acl_ingress_table_destroy+0x28/0x40 [mlx5_core] [] esw_acl_ingress_lgcy_cleanup+0x80/0xf4 [mlx5_core] [] esw_legacy_vport_acl_cleanup+0x44/0x60 [mlx5_core] [] esw_vport_cleanup+0x64/0x90 [mlx5_core] [] mlx5_esw_vport_disable+0xc0/0x1d0 [mlx5_core] [] mlx5_eswitch_unload_ec_vf_vports+0xcc/0x150 [mlx5_core] [] mlx5_eswitch_disable_sriov+0x198/0x2a0 [mlx5_core] [] mlx5_device_disable_sriov+0xb8/0x1e0 [mlx5_core] [] mlx5_sriov_detach+0x40/0x50 [mlx5_core] [] mlx5_unload+0x40/0xc4 [mlx5_core] [] mlx5_unload_one_devl_locked+0x6c/0xe4 [mlx5_core] [] mlx5_unload_one+0x3c/0x60 [mlx5_core] [] shutdown+0x7c/0xa4 [mlx5_core] [] pci_device_shutdown+0x3c/0xa0 [] device_shutdown+0x170/0x340 [] __do_sys_reboot+0x1f4/0x2a0 [] __arm64_sys_reboot+0x2c/0x40 [] invoke_syscall+0x78/0x100 [] el0_svc_common.constprop.0+0x54/0x184 [] do_el0_svc+0x30/0xac [] el0_svc+0x48/0x160 [] el0t_64_sync_handler+0xa4/0x12c [] el0t_64_sync+0x1a4/0x1a8 [] --[ end trace 9c4601d68c70030e ]---

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Tear down vGIC on failed vCPU creation If kvm_arch_vcpu_create() fails to share the vCPU page with the hypervisor, we propagate the error back to the ioctl but leave the vGIC vCPU data initialised. Note only does this leak the corresponding memory when the vCPU is destroyed but it can also lead to use-after-free if the redistributor device handling tries to walk into the vCPU. Add the missing cleanup to kvm_arch_vcpu_create(), ensuring that the vGIC vCPU structures are destroyed on error.

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix duplicate pci_dev_put() in disable_slot() when PF has child VFs With commit bcb5d6c76903 ("s390/pci: introduce lock to synchronize state of zpci_dev's") the code to ignore power off of a PF that has child VFs was changed from a direct return to a goto to the unlock and pci_dev_put() section. The change however left the existing pci_dev_put() untouched resulting in a doubple put. This can subsequently cause a use after free if the struct pci_dev is released in an unexpected state. Fix this by removing the extra pci_dev_put().

In the Linux kernel, the following vulnerability has been resolved: net: dsa: free routing table on probe failure If complete = true in dsa_tree_setup(), it means that we are the last switch of the tree which is successfully probing, and we should be setting up all switches from our probe path. After "complete" becomes true, dsa_tree_setup_cpu_ports() or any subsequent function may fail. If that happens, the entire tree setup is in limbo: the first N-1 switches have successfully finished probing (doing nothing but having allocated persistent memory in the tree's dst->ports, and maybe dst->rtable), and switch N failed to probe, ending the tree setup process before anything is tangible from the user's PoV. If switch N fails to probe, its memory (ports) will be freed and removed from dst->ports. However, the dst->rtable elements pointing to its ports, as created by dsa_link_touch(), will remain there, and will lead to use-after-free if dereferenced. If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely possible because that is where ds->ops->setup() is, we get a kasan report like this: ================================================================== BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568 Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42 Call trace: __asan_report_load8_noabort+0x20/0x30 mv88e6xxx_setup_upstream_port+0x240/0x568 mv88e6xxx_setup+0xebc/0x1eb0 dsa_register_switch+0x1af4/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Allocated by task 42: __kasan_kmalloc+0x84/0xa0 __kmalloc_cache_noprof+0x298/0x490 dsa_switch_touch_ports+0x174/0x3d8 dsa_register_switch+0x800/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Freed by task 42: __kasan_slab_free+0x48/0x68 kfree+0x138/0x418 dsa_register_switch+0x2694/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 The simplest way to fix the bug is to delete the routing table in its entirety. dsa_tree_setup_routing_table() has no problem in regenerating it even if we deleted links between ports other than those of switch N, because dsa_link_touch() first checks whether the port pair already exists in dst->rtable, allocating if not. The deletion of the routing table in its entirety already exists in dsa_tree_teardown(), so refactor that into a function that can also be called from the tree setup error path. In my analysis of the commit to blame, it is the one which added dsa_link elements to dst->rtable. Prior to that, each switch had its own ds->rtable which is freed when the switch fails to probe. But the tree is potentially persistent memory.

A use-after-free flaw was found in the Linux kernel’s FUSE filesystem in the way a user triggers write(). This flaw allows a local user to gain unauthorized access to data from the FUSE filesystem, resulting in privilege escalation.

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation. However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3: (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0, smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...] Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline] bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359 bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475 __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline] __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with "R7 pointer arithmetic on flow_keys prohibited".

An out-of-bounds (OOB) memory write flaw was found in the Linux kernel’s watch_queue event notification subsystem. This flaw can overwrite parts of the kernel state, potentially allowing a local user to gain privileged access or cause a denial of service on the system.

Integer Overflow or Wraparound vulnerability in io_uring of Linux Kernel allows local attacker to cause memory corruption and escalate privileges to root. This issue affects: Linux Kernel versions prior to 5.4.189; version 5.4.24 and later versions.

An integer overflow flaw was found in the Linux kernel’s virtio device driver code in the way a user triggers the vhost_vdpa_config_validate function. This flaw allows a local user to crash or potentially escalate their privileges on the system.

Linux Kernel could allow a local attacker to execute arbitrary code on the system, caused by a concurrency use-after-free flaw in the bad_flp_intr function. By executing a specially-crafted program, an attacker could exploit this vulnerability to execute arbitrary code or cause a denial of service condition on the system.

In the Linux kernel, the following vulnerability has been resolved: sctp: handle the error returned from sctp_auth_asoc_init_active_key When it returns an error from sctp_auth_asoc_init_active_key(), the active_key is actually not updated. The old sh_key will be freeed while it's still used as active key in asoc. Then an use-after-free will be triggered when sending patckets, as found by syzbot: sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 sctp_set_owner_w net/sctp/socket.c:132 [inline] sctp_sendmsg_to_asoc+0xbd5/0x1a20 net/sctp/socket.c:1863 sctp_sendmsg+0x1053/0x1d50 net/sctp/socket.c:2025 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 This patch is to fix it by not replacing the sh_key when it returns errors from sctp_auth_asoc_init_active_key() in sctp_auth_set_key(). For sctp_auth_set_active_key(), old active_key_id will be set back to asoc->active_key_id when the same thing happens.

A flaw was found in KVM. When updating a guest's page table entry, vm_pgoff was improperly used as the offset to get the page's pfn. As vaddr and vm_pgoff are controllable by user-mode processes, this flaw allows unprivileged local users on the host to write outside the userspace region and potentially corrupt the kernel, resulting in a denial of service condition.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix use-after-free due to delegation race A delegation break could arrive as soon as we've called vfs_setlease. A delegation break runs a callback which immediately (in nfsd4_cb_recall_prepare) adds the delegation to del_recall_lru. If we then exit nfs4_set_delegation without hashing the delegation, it will be freed as soon as the callback is done with it, without ever being removed from del_recall_lru. Symptoms show up later as use-after-free or list corruption warnings, usually in the laundromat thread. I suspect aba2072f4523 "nfsd: grant read delegations to clients holding writes" made this bug easier to hit, but I looked as far back as v3.0 and it looks to me it already had the same problem. So I'm not sure where the bug was introduced; it may have been there from the beginning.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 1.0.735 and Application prior to 20.0.1330 (macOS/Linux client deployments) contain a vulnerability in the local logging mechanism. Authentication session tokens, including PHPSESSID, XSRF-TOKEN, and laravel_session, are stored in cleartext within world-readable log files. Any local user with access to the machine can extract these session tokens and use them to authenticate remotely to the SaaS environment, bypassing normal login credentials, potentially leading to unauthorized system access and exposure of sensitive information. This vulnerability has been identified by the vendor as: V-2022-008 — Secrets Leaked in Logs.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: Fix string overflow in SCPI genpd driver Without the bound checks for scpi_pd->name, it could result in the buffer overflow when copying the SCPI device name from the corresponding device tree node as the name string is set at maximum size of 30. Let us fix it by using devm_kasprintf so that the string buffer is allocated dynamically.

In the Linux kernel, the following vulnerability has been resolved: sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix kernel panic during drive powercycle test While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL.

In the Linux kernel, the following vulnerability has been resolved: comedi: dt9812: fix DMA buffers on stack USB transfer buffers are typically mapped for DMA and must not be allocated on the stack or transfers will fail. Allocate proper transfer buffers in the various command helpers and return an error on short transfers instead of acting on random stack data. Note that this also fixes a stack info leak on systems where DMA is not used as 32 bytes are always sent to the device regardless of how short the command is.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 25.1.102 and Application versions prior to 25.1.1413 (macOS/Linux client deployments) are vulnerable to an authentication bypass in PrinterInstallerClientService. The service requires root privileges for certain administrative operations, but these checks rely on calls to geteuid(). By preloading a malicious shared object overriding geteuid(), a local attacker can trick the service into believing it is running with root privileges. This bypass enables execution of administrative commands (e.g., enabling debug mode, managing configurations, or invoking privileged features) without proper authorization. While some actions requiring write access to protected files may still fail, the flaw effectively breaks the intended security model of the inter-process communication (IPC) system, allowing local attackers to escalate privileges and compromise system integrity. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced.

In the Linux kernel, the following vulnerability has been resolved: media: davinci: vpif: fix use-after-free on driver unbind The driver allocates and registers two platform device structures during probe, but the devices were never deregistered on driver unbind. This results in a use-after-free on driver unbind as the device structures were allocated using devres and would be freed by driver core when remove() returns. Fix this by adding the missing deregistration calls to the remove() callback and failing probe on registration errors. Note that the platform device structures must be freed using a proper release callback to avoid leaking associated resources like device names.