The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959.

Improper input validation vulnerability in Samsung Open Source Escargot allows stack overflow and segmentation fault. This issue affects Escargot: from 3.0.0 through 4.0.0.

Remote command execution due to improper input validation. The following products are affected: Acronis Cloud Manager (Windows) before build 6.2.23089.203.

EMC VASA Provider Virtual Appliance versions 8.3.x and prior has an unauthenticated remote code execution vulnerability that could potentially be exploited by malicious users to compromise the affected system.

Vulnerability in the Oracle VM VirtualBox component of Oracle Virtualization (subcomponent: GUI). Supported versions that are affected are VirtualBox prior to 5.0.32 and prior to 5.1.14. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise Oracle VM VirtualBox. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS v3.0 Base Score 8.4 (Confidentiality, Integrity and Availability impacts).

Chunghwa Telecom NOKIA G-040W-Q Firewall function has a vulnerability of input validation for ICMP redirect messages. An unauthenticated remote attacker can exploit this vulnerability by sending a crafted package to modify the network routing table, resulting in a denial of service or sensitive information leaking.

Remote command execution due to improper input validation. The following products are affected: Acronis Cloud Manager (Windows) before build 6.2.23089.203.

 Insecure job execution mechanism vulnerability. This vulnerability can lead to other attacks as a result.

The FeedProxy.aspx script in Umbraco 4.7.0 allows remote attackers to proxy requests on their behalf via the "url" parameter.

** UNSUPPORTED WHEN ASSIGNED ** When integrating Apache Axis 1.x in an application, it may not have been obvious that looking up a service through "ServiceFactory.getService" allows potentially dangerous lookup mechanisms such as LDAP. When passing untrusted input to this API method, this could expose the application to DoS, SSRF and even attacks leading to RCE. As Axis 1 has been EOL we recommend you migrate to a different SOAP engine, such as Apache Axis 2/Java. As a workaround, you may review your code to verify no untrusted or unsanitized input is passed to "ServiceFactory.getService", or by applying the patch from https://github.com/apache/axis-axis1-java/commit/7e66753427466590d6def0125e448d2791723210 . The Apache Axis project does not expect to create an Axis 1.x release fixing this problem, though contributors that would like to work towards this are welcome.

An issue was discovered in ONLYOFFICE Document Server 5.5.0. An attacker can craft a malicious .docx file, and exploit the unzip function to rewrite a binary and remotely execute code on a victim's server.

An issue was discovered in ONLYOFFICE Document Server 5.5.0. An attacker can craft a malicious .docx file, and exploit the NSFileDownloader function to pass parameters to a binary (such as curl or wget) and remotely execute code on a victim's server.

Improper input validation in Exynos baseband prior to SMR Feb-2022 Release 1 allows attackers to send arbitrary NAS signaling messages with fake base station.

matrix-appservice-irc is a Node.js IRC bridge for Matrix. Prior to version 1.0.1, it is possible to craft a command with newlines which would not be properly parsed. This would mean you could pass a string of commands as a channel name, which would then be run by the IRC bridge bot. Versions 1.0.1 and above are patched. There are no robust workarounds to the bug. One may disable dynamic channels in the config to disable the most common execution method but others may exist.

OctoRPKI does not escape a URI with a filename containing "..", this allows a repository to create a file, (ex. rsync://example.org/repo/../../etc/cron.daily/evil.roa), which would then be written to disk outside the base cache folder. This could allow for remote code execution on the host machine OctoRPKI is running on.

Vulnerability of out-of-bounds parameter read/write in the Wi-Fi module. Successful exploitation of this vulnerability may cause other apps to be executed with escalated privileges.

Crossplane is a framework for building cloud native control planes without needing to write code. In versions prior to 1.11.5, 1.12.3, and 1.13.0, Crossplane's image backend does not validate the byte contents of Crossplane packages. As such, Crossplane does not detect if an attacker has tampered with a Package. The problem has been fixed in 1.11.5, 1.12.3 and 1.13.0. As a workaround, only use images from trusted sources and keep Package editing/creating privileges to administrators only.

SugarCRM CE <= 6.3.1 contains scripts that use "unserialize()" with user controlled input which allows remote attackers to execute arbitrary PHP code.

import-in-the-middle is a module loading interceptor specifically for ESM modules. The import-in-the-middle loader works by generating a wrapper module on the fly. The wrapper uses the module specifier to load the original module and add some wrapping code. Prior to version 1.4.2, it allows for remote code execution in cases where an application passes user-supplied input directly to the `import()` function. This vulnerability has been patched in import-in-the-middle version 1.4.2. Some workarounds are available. Do not pass any user-supplied input to `import()`. Instead, verify it against a set of allowed values. If using import-in-the-middle, directly or indirectly, and support for EcmaScript Modules is not needed, ensure that no options are set, either via command-line or the `NODE_OPTIONS` environment variable, that would enable loader hooks.

A flaw was found in Moodle in versions 3.11 to 3.11.3, 3.10 to 3.10.7, 3.9 to 3.9.10 and earlier unsupported versions. A remote code execution risk when restoring backup files was identified.

.NET, .NET Framework, and Visual Studio Elevation of Privilege Vulnerability

Yubico PAM Module before 2.10 performed user authentication when 'use_first_pass' PAM configuration option was not used and the module was configured as 'sufficient' in the PAM configuration. A remote attacker could use this flaw to circumvent common authentication process and obtain access to the account in question by providing a NULL value (pressing Ctrl-D keyboard sequence) as the password string.

A Code Execution vulnerability exists the attachment parameter to index.php in Jcow CMS 4.x to 4.2 and 5.2 to 5.2.

Atos Unify OpenScape Session Border Controller through V10 R3.01.03 allows execution of administrative scripts by unauthenticated users.

Improper Input Validation vulnerability in Honeywell PM43 on 32 bit, ARM (Printer web page modules) allows Command Injection.This issue affects PM43 versions prior to P10.19.050004. Update to the latest available firmware version of the respective printers to version MR19.5 (e.g. P10.19.050006).

Windows Routing and Remote Access Service (RRAS) Remote Code Execution Vulnerability

Improper Input Validation vulnerability in Apache Software Foundation Apache Airflow Hive Provider. This issue affects Apache Airflow Apache Hive Provider: before 6.1.1. Before version 6.1.1 it was possible to bypass the security check to RCE via principal parameter. For this to be exploited it requires access to modifying the connection details. It is recommended updating provider version to 6.1.1 in order to avoid this vulnerability.

A remote command injection vulnerability exists in the Barracuda Email Security Gateway (appliance form factor only) product effecting versions 5.1.3.001-9.2.0.006. The vulnerability arises out of a failure to comprehensively sanitize the processing of .tar file (tape archives). The vulnerability stems from incomplete input validation of a user-supplied .tar file as it pertains to the names of the files contained within the archive. As a consequence, a remote attacker can specifically format these file names in a particular manner that will result in remotely executing a system command through Perl's qx operator with the privileges of the Email Security Gateway product. This issue was fixed as part of BNSF-36456 patch. This patch was automatically applied to all customer appliances.

Microsoft Message Queuing (MSMQ) Remote Code Execution Vulnerability

gdk-pixbuf through 2.31.1 has GIF loader buffer overflow when initializing decompression tables due to an input validation flaw

Windows Routing and Remote Access Service (RRAS) Remote Code Execution Vulnerability

CKAN is an open-source data management system for powering data hubs and data portals. Multiple vulnerabilities have been discovered in Ckan which may lead to remote code execution. An arbitrary file write in `resource_create` and `package_update` actions, using the `ResourceUploader` object. Also reachable via `package_create`, `package_revise`, and `package_patch` via calls to `package_update`. Remote code execution via unsafe pickle loading, via Beaker's session store when configured to use the file session store backend. Potential DOS due to lack of a length check on the resource id. Information disclosure: A user with permission to create a resource can access any other resource on the system if they know the id, even if they don't have access to it. Resource overwrite: A user with permission to create a resource can overwrite any resource if they know the id, even if they don't have access to it. A user with permissions to create or edit a dataset can upload a resource with a specially crafted id to write the uploaded file in an arbitrary location. This can be leveraged to Remote Code Execution via Beaker's insecure pickle loading. All the above listed vulnerabilities have been fixed in CKAN 2.9.9 and CKAN 2.10.1. Users are advised to upgrade. There are no known workarounds for these issues.

WriteRegistry function in TSSServiSign component does not filter and verify users’ input, remote attackers can rewrite to the registry without permissions thus perform hijack attacks to execute arbitrary code.

Windows Routing and Remote Access Service (RRAS) Remote Code Execution Vulnerability

In FreeRDP before 2.4.0 on Windows, wf_cliprdr_server_file_contents_request in client/Windows/wf_cliprdr.c has missing input checks for a FILECONTENTS_RANGE File Contents Request PDU.

In FreeRDP before 2.4.0 on Windows, wf_cliprdr_server_file_contents_request in client/Windows/wf_cliprdr.c has missing input checks for a FILECONTENTS_SIZE File Contents Request PDU.

A vulnerability was found in ImageMagick. This security flaw cause a remote code execution vulnerability in OpenBlob with --enable-pipes configured.

The `Release PR Merged` workflow in the github repo taosdata/grafanaplugin is subject to a command injection vulnerability which allows for arbitrary code execution within the github action context due to the insecure usage of `${{ github.event.pull_request.title }}` in a bash command within the GitHub workflow. Attackers can inject malicious commands which will be executed by the workflow. This happens because `${{ github.event.pull_request.title }}` is directly passed to bash command on like 25 of the workflow. This may allow an attacker to gain access to secrets which the github action has access to or to otherwise make use of the compute resources.

Multiple vulnerabilities exists in Aruba Instate before 4.1.3.0 and 4.2.3.1 due to insufficient validation of user-supplied input and insufficient checking of parameters, which could allow a malicious user to bypass security restrictions, obtain sensitive information, perform unauthorized actions and execute arbitrary code.

Dell SmartFabric Storage Software version 1.3 and lower contain an improper input validation vulnerability. A remote unauthenticated attacker may exploit this vulnerability and escalate privileges up to the highest administration level. This is a critical severity vulnerability affecting user authentication. Dell recommends customers to upgrade at the earliest opportunity.

An attacker can send a specially crafted message to the Wavelink Avalanche Manager, which could result in service disruption or arbitrary code execution. Thanks to a Researcher at Tenable for finding and reporting. Fixed in version 6.4.1.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. The issue results from the lack of proper validation of DNS reponses prior to further processing. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the root user. Was ZDI-CAN-9661.

The Zabbix Agent 2 item key smart.disk.get does not sanitize its parameters before passing them to a shell command resulting possible vulnerability for remote code execution.

In Django 3.2 before 3.2.19, 4.x before 4.1.9, and 4.2 before 4.2.1, it was possible to bypass validation when using one form field to upload multiple files. This multiple upload has never been supported by forms.FileField or forms.ImageField (only the last uploaded file was validated). However, Django's "Uploading multiple files" documentation suggested otherwise.

Security vulnerability in Apache bRPC <1.5.0 on all platforms allows attackers to execute arbitrary code via ServerOptions::pid_file. An attacker that can influence the ServerOptions pid_file parameter with which the bRPC server is started can execute arbitrary code with the permissions of the bRPC process. Solution: 1. upgrade to bRPC >= 1.5.0, download link:  https://dist.apache.org/repos/dist/release/brpc/1.5.0/ https://dist.apache.org/repos/dist/release/brpc/1.5.0/ 2. If you are using an old version of bRPC and hard to upgrade, you can apply this patch:  https://github.com/apache/brpc/pull/2218 https://github.com/apache/brpc/pull/2218

Windows Pragmatic General Multicast (PGM) Remote Code Execution Vulnerability

Microsoft Message Queuing (MSMQ) Remote Code Execution Vulnerability

Dell OS10 Networking Switches running 10.5.2.x and above contain an OS command injection vulnerability when using remote user authentication. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands and possible system takeover. This is a critical vulnerability as it allows an attacker to cause severe damage. Dell recommends customers to upgrade at the earliest opportunity.