A vulnerability in the processing of SSH connections for multi-instance deployments of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to a lack of proper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, which causes a DoS condition on the affected device. The device must be manually reloaded to recover.
A vulnerability in the memory management of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper resource management when connection rates are high. An attacker could exploit this vulnerability by opening a significant number of connections on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
The IKEv1 implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x and 3.1.xS through 3.4.xS before 3.4.2S, 3.5.xS before 3.5.1S, and 3.2.xSG before 3.2.2SG allows remote attackers to cause a denial of service (device reload) by sending IKE UDP packets over (1) IPv4 or (2) IPv6, aka Bug ID CSCts38429.
Cisco Unified Presence before 8.5(4) does not properly detect recursion during entity expansion, which allows remote attackers to cause a denial of service (memory and CPU consumption, and process crash) via a crafted XML document containing a large number of nested entity references, aka Bug IDs CSCtq89842 and CSCtq88547, a similar issue to CVE-2003-1564.
The ethernet-lldp component in Cisco IOS 12.2 before 12.2(33)SXJ1 does not properly support a large number of LLDP Management Address (MA) TLVs, which allows remote attackers to cause a denial of service (device crash) via crafted LLDPDUs, aka Bug ID CSCtj22354.
The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle an external loop between a pair of dot1x enabled ports, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many unicast EAPoL Protocol Data Units (PDUs), aka Bug ID CSCtq36336.
The do_change_cipher_spec function in OpenSSL 0.9.6c to 0.9.6k, and 0.9.7a to 0.9.7c, allows remote attackers to cause a denial of service (crash) via a crafted SSL/TLS handshake that triggers a null dereference.
Cisco Unified Personal Communicator 7.0 (1.13056) does not free allocated memory for received data and does not perform validation if memory allocation is successful, causing a remote denial of service condition.
Cisco IOS XR 3.4.0 through 3.9.1, when BGP is enabled, does not properly handle unrecognized transitive attributes, which allows remote attackers to cause a denial of service (peering reset) via a crafted prefix announcement, as demonstrated in the wild in August 2010 with attribute type code 99, aka Bug ID CSCti62211.
A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco IOS 15.0 through 15.6 and Cisco IOS XE 3.5 through 16.5 could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to how an affected device processes certain IKEv2 packets. An attacker could exploit this vulnerability by sending specific IKEv2 packets to an affected device to be processed. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. This vulnerability affects Cisco devices that have the Internet Security Association and Key Management Protocol (ISAKMP) enabled. Although only IKEv2 packets can be used to trigger this vulnerability, devices that are running Cisco IOS Software or Cisco IOS XE Software are vulnerable when ISAKMP is enabled. A device does not need to be configured with any IKEv2-specific features to be vulnerable. Many features use IKEv2, including different types of VPNs such as the following: LAN-to-LAN VPN; Remote-access VPN, excluding SSL VPN; Dynamic Multipoint VPN (DMVPN); and FlexVPN. Cisco Bug IDs: CSCvc41277.
A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. This vulnerability is due to insufficient resource management when establishing TLS/SSL sessions. An attacker could exploit this vulnerability by sending a series of crafted TLS/SSL messages to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
A vulnerability in the HTTP Server feature of Cisco IOS XE Software when the Telephony Service feature is enabled could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a null pointer dereference when accessing specific URLs. An attacker could exploit this vulnerability by sending crafted HTTP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, causing a DoS condition on the affected device.
A vulnerability in Cisco Smart Licensing Utility (CSLU) could allow an unauthenticated, remote attacker to log into an affected system by using a static administrative credential. This vulnerability is due to an undocumented static user credential for an administrative account. An attacker could exploit this vulnerability by using the static credentials to login to the affected system. A successful exploit could allow the attacker to login to the affected system with administrative rights over the CSLU application API.
A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to insufficient resource management while establishing SSL VPN sessions. An attacker could exploit this vulnerability by sending a series of crafted HTTPS requests to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
A vulnerability in the multicast traceroute version 2 (Mtrace2) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust the UDP packet memory of an affected device. This vulnerability exists because the Mtrace2 code does not properly handle packet memory. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to exhaust the incoming UDP packet memory. The affected device would not be able to process higher-level UDP-based protocols packets, possibly causing a denial of service (DoS) condition. Note: This vulnerability can be exploited using IPv4 or IPv6.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business SPA300 Series IP Phones and Cisco Small Business SPA500 Series IP Phones could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly. These vulnerabilities exist because HTTP packets are not properly checked for errors. An attacker could exploit this vulnerability by sending a crafted HTTP packet to the remote interface of an affected device. A successful exploit could allow the attacker to cause a DoS condition on the device.
A vulnerability in the Locator ID Separation Protocol (LISP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to the incorrect handling of LISP packets. An attacker could exploit this vulnerability by sending a crafted LISP packet to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Note: This vulnerability could be exploited over either IPv4 or IPv6 transport.
A vulnerability in the TCP/IP traffic handling function of the Snort Detection Engine of Cisco Firepower Threat Defense (FTD) Software and Cisco FirePOWER Services could allow an unauthenticated, remote attacker to cause legitimate network traffic to be dropped, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of TCP/IP network traffic. An attacker could exploit this vulnerability by sending a large amount of TCP/IP network traffic through the affected device. A successful exploit could allow the attacker to cause the Cisco FTD device to drop network traffic, resulting in a DoS condition. The affected device must be rebooted to resolve the DoS condition.
Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuz95334.
A vulnerability in the implementation of Network Address Translation (NAT) functionality in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the improper translation of H.323 messages that use the Registration, Admission, and Status (RAS) protocol and are sent to an affected device via IPv4 packets. An attacker could exploit this vulnerability by sending a crafted H.323 RAS packet through an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to use an application layer gateway with NAT (NAT ALG) for H.323 RAS messages. By default, a NAT ALG is enabled for H.323 RAS messages. Cisco Bug IDs: CSCvc57217.
Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.
Multiple vulnerabilities in the ingress packet processing function of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability with the Border Gateway Protocol (BGP) for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to cause a routing process to crash, which could lead to a denial of service (DoS) condition. This vulnerability is due to an issue with the installation of routes upon receipt of a BGP update. An attacker could exploit this vulnerability by sending a crafted BGP update to an affected device. A successful exploit could allow the attacker to cause the routing process to crash, which could cause the device to reload. This vulnerability applies to both Internal BGP (IBGP) and External BGP (EBGP). Note: The Cisco implementation of BGP accepts incoming BGP traffic from explicitly configured peers only. To exploit this vulnerability, an attacker would need to send a specific BGP update message over an established TCP connection that appears to come from a trusted BGP peer.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device. Cisco has not released software updates that address this vulnerability.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.
A vulnerability in the Cisco IOx Application Framework of Cisco 809 Industrial Integrated Services Routers (Industrial ISRs), Cisco 829 Industrial ISRs, Cisco CGR 1000 Compute Module, and Cisco IC3000 Industrial Compute Gateway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling during packet processing. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the IOx web server on an affected device. A successful exploit could allow the attacker to cause the IOx web server to stop processing requests, resulting in a DoS condition.
Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.
A vulnerability in the web portal of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to perform a command injection attack and execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation by the web portal framework. An attacker could exploit this vulnerability by providing malicious input during web portal authentication. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
A vulnerability in the “plug-and-play” services component of Cisco Industrial Network Director (IND) could allow an unauthenticated, remote attacker to access sensitive information on an affected device. The vulnerability is due to improper access restrictions on the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to access running configuration information about devices managed by the IND, including administrative credentials.
A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default.
A vulnerability in Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to log in to the CLI of an affected system by using the SCP User account (scpuser), which has default user credentials. The vulnerability is due to the presence of a documented default account with an undocumented default password and incorrect permission settings for that account. Changing the default password for this account is not enforced during the installation of the product. An attacker could exploit this vulnerability by using the account to log in to an affected system. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the scpuser account. This includes full read and write access to the system's database.
A vulnerability in the web interface of Cisco IoT Field Network Director could allow an unauthenticated, remote attacker to trigger high CPU usage, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of Transport Layer Security (TLS) renegotiation requests. An attacker could exploit this vulnerability by sending renegotiation requests at a high rate. A successful exploit could increase the resource usage on the system, eventually leading to a DoS condition.
A vulnerability in the web server of Cisco Integrated Management Controller (IMC) could allow an unauthenticated, remote attacker to cause the web server process to crash, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of user-supplied input on the web interface. An attacker could exploit this vulnerability by submitting a crafted HTTP request to certain endpoints of the affected software. A successful exploit could allow an attacker to cause the web server to crash. Physical access to the device may be required for a restart.
A vulnerability in the Virtual Network Computing (VNC) console implementation of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to access the VNC console session of an administrative user on an affected device. The vulnerability is due to an insufficient authentication mechanism used to establish a VNC session. An attacker could exploit this vulnerability by intercepting an administrator VNC session request prior to login. A successful exploit could allow the attacker to watch the administrator console session or interact with it, allowing admin access to the affected device.
A vulnerability in the Network Time Protocol (NTP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to excessive use of system resources when the affected device is logging a drop action for received MODE_PRIVATE (Mode 7) NTP packets. An attacker could exploit this vulnerability by flooding the device with a steady stream of Mode 7 NTP packets. A successful exploit could allow the attacker to cause high CPU and memory usage on the affected device, which could cause internal system processes to restart or cause the affected device to unexpectedly reload. Note: The NTP feature is enabled by default.
A vulnerability in the Cisco Common Services Platform Collector (CSPC) could allow an unauthenticated, remote attacker to access an affected device by using an account that has a default, static password. This account does not have administrator privileges. The vulnerability exists because the affected software has a user account with a default, static password. An attacker could exploit this vulnerability by remotely connecting to the affected system using this account. A successful exploit could allow the attacker to log in to the CSPC using the default account. For Cisco CSPC 2.7.x, Cisco fixed this vulnerability in Release 2.7.4.6. For Cisco CSPC 2.8.x, Cisco fixed this vulnerability in Release 2.8.1.2.
A vulnerability in the Cisco Encrypted Traffic Analytics (ETA) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a logic error that exists when handling a malformed incoming packet, leading to access to an internal data structure after it has been freed. An attacker could exploit this vulnerability by sending crafted, malformed IP packets to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition.
A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software does not restrict the maximum size of certain files that can be written to disk. An attacker who has valid administrator credentials for an affected system could exploit this vulnerability by sending a crafted, remote connection request to an affected system. A successful exploit could allow the attacker to write a file that consumes most of the available disk space on the system, causing application functions to operate abnormally and leading to a DoS condition. This vulnerability affects Cisco IP Phone 8800 Series products running a SIP Software release prior to 12.5(1)SR1.
A vulnerability in the SSH key management for the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, remote attacker to connect to the affected system with the privileges of the root user. The vulnerability is due to the presence of a default SSH key pair that is present in all devices. An attacker could exploit this vulnerability by opening an SSH connection via IPv6 to a targeted device using the extracted key materials. An exploit could allow the attacker to access the system with the privileges of the root user. This vulnerability is only exploitable over IPv6; IPv4 is not vulnerable.
A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to a parsing issue on DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.
A vulnerability in the TCP proxy functionality for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to an error in TCP-based packet inspection, which could cause the TCP packet to have an invalid Layer 2 (L2)-formatted header. An attacker could exploit this vulnerability by sending a crafted TCP packet sequence to the targeted device. A successful exploit could allow the attacker to cause a DoS condition.
A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to a parsing issue on DNS packets. An attacker could exploit these vulnerabilities by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.
A vulnerability in the web interface of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to trigger high CPU usage, resulting in a denial of service (DoS) condition. The vulnerability is due to improper handling of Secure Sockets Layer (SSL) renegotiation requests. An attacker could exploit this vulnerability by sending renegotiation requests at a high rate. An successful exploit could increase the resource usage on the system, eventually leading to a DoS condition. This vulnerability affects version 2.1.
A vulnerability in the ISDN functions of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect processing of specific values in the Q.931 information elements. An attacker could exploit this vulnerability by calling the affected device with specific Q.931 information elements being present. An exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device.
ClamAV versions prior to 0.101.2 are susceptible to a denial of service (DoS) vulnerability. An out-of-bounds heap read condition may occur when scanning PE files. An example is Windows EXE and DLL files that have been packed using Aspack as a result of inadequate bound-checking.