A vulnerability in the Internet Key Exchange version 1 (IKEv1) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper management of system memory. An attacker could exploit this vulnerability by sending malicious IKEv1 traffic to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.
A vulnerability in the call-handling functionality of Session Initiation Protocol (SIP) Software for Cisco IP Phone 7800 Series and 8800 Series could allow an unauthenticated, remote attacker to cause an affected phone to reload unexpectedly, resulting in a temporary denial of service (DoS) condition. The vulnerability is due to incomplete error handling when XML data within a SIP packet is parsed. An attacker could exploit this vulnerability by sending a SIP packet that contains a malicious XML payload to an affected phone. A successful exploit could allow the attacker to cause the affected phone to reload unexpectedly, resulting in a temporary DoS condition.
A vulnerability in the web interface of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to trigger high CPU usage, resulting in a denial of service (DoS) condition. The vulnerability is due to improper handling of Secure Sockets Layer (SSL) renegotiation requests. An attacker could exploit this vulnerability by sending renegotiation requests at a high rate. An successful exploit could increase the resource usage on the system, eventually leading to a DoS condition. This vulnerability affects version 2.1.
A vulnerability in the ingress packet processing function of Cisco IOS Software for Cisco Catalyst 4000 Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper resource allocation when processing TCP packets directed to the device on specific Cisco Catalyst 4000 Series Switches. An attacker could exploit this vulnerability by sending crafted TCP streams to an affected device. A successful exploit could cause the affected device to run out of buffer resources, impairing operations of control plane and management plane protocols, resulting in a DoS condition. This vulnerability can be triggered only by traffic that is destined to an affected device and cannot be exploited using traffic that transits an affected device.
A vulnerability in the UDP processing functionality of Cisco IOS XE Software for Embedded Wireless Controllers on Catalyst 9100 Series Access Points could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of UDP datagrams. An attacker could exploit this vulnerability by sending malicious UDP datagrams to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Multiple vulnerabilities in the ingress packet processing function of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the HTTP server code of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the HTTP server to crash. The vulnerability is due to a logical error in the logging mechanism. An attacker could exploit this vulnerability by generating a high amount of long-lived connections to the HTTP service on the device. A successful exploit could allow the attacker to cause the HTTP server to crash.
A vulnerability in the Network Address Translation (NAT) Session Initiation Protocol (SIP) Application Layer Gateway (ALG) of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper processing of transient SIP packets on which NAT is performed on an affected device. An attacker could exploit this vulnerability by using UDP port 5060 to send crafted SIP packets through an affected device that is performing NAT for SIP packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition.
A vulnerability in an API of the Call Bridge feature of Cisco Meeting Server could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper handling of large series of message requests. An attacker could exploit this vulnerability by sending a series of messages to the vulnerable API. A successful exploit could allow the attacker to cause the affected device to reload, dropping all ongoing calls and resulting in a DoS condition.
A vulnerability in how Cisco Firepower Threat Defense (FTD) Software handles session timeouts for management connections could allow an unauthenticated, remote attacker to cause a buildup of remote management connections to an affected device, which could result in a denial of service (DoS) condition. The vulnerability exists because the default session timeout period for specific to-the-box remote management connections is too long. An attacker could exploit this vulnerability by sending a large and sustained number of crafted remote management connections to an affected device, resulting in a buildup of those connections over time. A successful exploit could allow the attacker to cause the remote management interface or Cisco Firepower Device Manager (FDM) to stop responding and cause other management functions to go offline, resulting in a DoS condition. The user traffic that is flowing through the device would not be affected, and the DoS condition would be isolated to remote management only.
A vulnerability in the Secure Login Enhancements capability of Cisco Nexus 1000V Switch for VMware vSphere could allow an unauthenticated, remote attacker to cause an affected Nexus 1000V Virtual Supervisor Module (VSM) to become inaccessible to users through the CLI. The vulnerability is due to improper resource allocation during failed CLI login attempts when login parameters that are part of the Secure Login Enhancements capability are configured on an affected device. An attacker could exploit this vulnerability by performing a high amount of login attempts against the affected device. A successful exploit could cause the affected device to become inaccessible to other users, resulting in a denial of service (DoS) condition requiring a manual power cycle of the VSM to recover.
A vulnerability in the DHCP processing functionality of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of DHCP messages. An attacker could exploit this vulnerability by sending malicious DHCP messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in CHM file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available.
A vulnerability in the DNS-based Authentication of Named Entities (DANE) email verification component of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling in DNS name resolution by the affected software. An attacker could exploit this vulnerability by sending specially formatted email messages that are processed by an affected device. A successful exploit could allow the attacker to cause the device to become unreachable from management interfaces or to process additional email messages for a period of time until the device recovers, resulting in a DoS condition. Continued attacks could cause the device to become completely unavailable, resulting in a persistent DoS condition.
On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in the TIFF file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available.
A vulnerability in the rate limiter for Bidirectional Forwarding Detection (BFD) traffic of Cisco NX-OS Software for Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to cause BFD traffic to be dropped on an affected device. This vulnerability is due to a logic error in the BFD rate limiter functionality. An attacker could exploit this vulnerability by sending a crafted stream of traffic through the device. A successful exploit could allow the attacker to cause BFD traffic to be dropped, resulting in BFD session flaps. BFD session flaps can cause route instability and dropped traffic, resulting in a denial of service (DoS) condition. This vulnerability applies to both IPv4 and IPv6 traffic.
A vulnerability in the Snort rule evaluation function of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of the DNS reputation enforcement rule. An attacker could exploit this vulnerability by sending crafted UDP packets through an affected device to force a buildup of UDP connections. A successful exploit could allow the attacker to cause traffic that is going through the affected device to be dropped, resulting in a DoS condition. Note: This vulnerability only affects Cisco FTD devices that are running Snort 3.
A vulnerability in the RADIUS feature of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause the affected system to stop processing RADIUS packets. This vulnerability is due to improper handling of certain RADIUS requests. An attacker could exploit this vulnerability by attempting to authenticate to a network or a service where the access server is using Cisco ISE as the RADIUS server. A successful exploit could allow the attacker to cause Cisco ISE to stop processing RADIUS requests, causing authentication/authorization timeouts, which would then result in legitimate requests being denied access. Note: To recover the ability to process RADIUS packets, a manual restart of the affected Policy Service Node (PSN) is required. See the Details section for more information.
A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol component of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper input validation on fields within CAPWAP Discovery Request packets by the affected device. An attacker could exploit this vulnerability by sending malicious CAPWAP Discovery Request packets to the Cisco WLC Software. A successful exploit could allow the attacker to cause the Cisco WLC Software to disconnect associated access points (APs). While the APs disconnect and reconnect, service will be unavailable for a brief period of time, resulting in a DoS condition.
A vulnerability in the detection engine parsing of Security Socket Layer (SSL) protocol packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the Snort process unexpectedly restarting. The vulnerability is due to improper input handling of the SSL traffic. An attacker could exploit this vulnerability by sending a crafted SSL traffic to the detection engine on the targeted device. An exploit could allow the attacker to cause a DoS condition if the Snort process restarts and traffic inspection is bypassed or traffic is dropped. Cisco Bug IDs: CSCvi36434.
A vulnerability in the ingress traffic manager of Cisco IOS XE Software for Cisco Network Convergence System (NCS) 520 Routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition in the web management interface of an affected device. This vulnerability is due to incorrect processing of certain IPv4 TCP traffic that is destined to an affected device. An attacker could exploit this vulnerability by sending a large number of crafted TCP packets to the affected device. A successful exploit could allow the attacker to cause the web management interface to become unavailable, resulting in a DoS condition. Note: This vulnerability does not impact traffic that is going through the device or going to the Management Ethernet interface of the device.
Multiple vulnerabilities in the ingress packet processing function of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the web interface of Cisco IoT Field Network Director could allow an unauthenticated, remote attacker to trigger high CPU usage, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of Transport Layer Security (TLS) renegotiation requests. An attacker could exploit this vulnerability by sending renegotiation requests at a high rate. A successful exploit could increase the resource usage on the system, eventually leading to a DoS condition.
Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.
A vulnerability in the netconf interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on affected system. The vulnerability is due to improper handling of malformed requests processed by the netconf process. An attacker could exploit this vulnerability by sending malicious requests to the affected software. An exploit could allow the attacker to cause the targeted process to restart, resulting in a DoS condition on the affected system. Cisco Bug IDs: CSCvg95792.
A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078.
A vulnerability in the DNS functionality of Cisco Nexus Dashboard Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of DNS requests. An attacker could exploit this vulnerability by sending a continuous stream of DNS requests to an affected device. A successful exploit could allow the attacker to cause the coredns service to stop working or cause the device to reload, resulting in a DoS condition.
A vulnerability in the Network Time Protocol (NTP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to excessive use of system resources when the affected device is logging a drop action for received MODE_PRIVATE (Mode 7) NTP packets. An attacker could exploit this vulnerability by flooding the device with a steady stream of Mode 7 NTP packets. A successful exploit could allow the attacker to cause high CPU and memory usage on the affected device, which could cause internal system processes to restart or cause the affected device to unexpectedly reload. Note: The NTP feature is enabled by default.
Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.
IP-in-IP protocol specifies IP Encapsulation within IP standard (RFC 2003, STD 1) that decapsulate and route IP-in-IP traffic is vulnerable to spoofing, access-control bypass and other unexpected behavior due to the lack of validation to verify network packets before decapsulation and routing.
A vulnerability in the TCP packet processing functionality of Cisco IP Phones could allow an unauthenticated, remote attacker to cause the phone to stop responding to incoming calls, drop connected calls, or unexpectedly reload. The vulnerability is due to insufficient TCP ingress packet rate limiting. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the targeted device. A successful exploit could allow the attacker to impact operations of the phone or cause the phone to reload, leading to a denial of service (DoS) condition.
A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the Cisco NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default.
A vulnerability in the Internet Key Exchange Version 2 (IKEv2) implementation in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent IKEv2 from establishing new security associations. The vulnerability is due to incorrect handling of crafted IKEv2 SA-Init packets. An attacker could exploit this vulnerability by sending crafted IKEv2 SA-Init packets to the affected device. An exploit could allow the attacker to cause the affected device to reach the maximum incoming negotiation limits and prevent further IKEv2 security associations from being formed.
A vulnerability in the Data-Loss-Prevention (DLP) module in Clam AntiVirus (ClamAV) Software versions 0.102.1 and 0.102.0 could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to an out-of-bounds read affecting users that have enabled the optional DLP feature. An attacker could exploit this vulnerability by sending a crafted email file to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process crash, resulting in a denial of service condition.
A vulnerability in the login authentication functionality of the Remote Access SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to deny further VPN user authentications for several minutes, resulting in a temporary denial of service (DoS) condition. This vulnerability is due to ineffective handling of memory resources during the authentication process. An attacker could exploit this vulnerability by sending crafted packets, which could cause resource exhaustion of the authentication process. A successful exploit could allow the attacker to deny authentication for Remote Access SSL VPN users for several minutes, resulting in a temporary DoS condition.
A vulnerability in the IPv6 packet processing engine of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of incoming IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet through an affected device. A successful exploit could allow the attacker to cause the switch management CLI to stop responding, resulting in a DoS condition. This vulnerability is specific to IPv6 traffic. IPv4 traffic is not affected.
A vulnerability in the 802.11 Generic Advertisement Service (GAS) frame processing function of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS). The vulnerability is due to incomplete input validation of the 802.11 GAS frames that are processed by an affected device. An attacker could exploit this vulnerability by sending a crafted 802.11 GAS frame over the air to an access point (AP), and that frame would then be relayed to the affected WLC. Also, an attacker with Layer 3 connectivity to the WLC could exploit this vulnerability by sending a malicious 802.11 GAS payload in a Control and Provisioning of Wireless Access Points (CAPWAP) packet to the device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS.
A vulnerability in the implementation of the Border Gateway Protocol (BGP) module in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain BGP packets. An attacker could exploit this vulnerability by sending a crafted BGP packet. A successful exploit could allow the attacker to cause a DoS condition on the affected device.
Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuz95334.
Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc43709.
A vulnerability in system resource management in Cisco UCS 6400 and 6500 Series Fabric Interconnects that are in Intersight Managed Mode (IMM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the Device Console UI of an affected device. This vulnerability is due to insufficient rate-limiting of TCP connections to an affected device. An attacker could exploit this vulnerability by sending a high number of TCP packets to the Device Console UI. A successful exploit could allow an attacker to cause the Device Console UI process to crash, resulting in a DoS condition. A manual reload of the fabric interconnect is needed to restore complete functionality.
A vulnerability in the Resource Reservation Protocol (RSVP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a buffer overflow when processing crafted RSVP packets. An attacker could exploit this vulnerability by sending RSVP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
A vulnerability in the DHCP version 4 (DHCPv4) server feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to trigger a crash of the dhcpd process, resulting in a denial of service (DoS) condition. This vulnerability exists because certain DHCPv4 messages are improperly validated when they are processed by an affected device. An attacker could exploit this vulnerability by sending a malformed DHCPv4 message to an affected device. A successful exploit could allow the attacker to cause a crash of the dhcpd process. While the dhcpd process is restarting, which may take approximately two minutes, DHCPv4 server services are unavailable on the affected device. This could temporarily prevent network access to clients that join the network during that time period and rely on the DHCPv4 server of the affected device. Notes: Only the dhcpd process crashes and eventually restarts automatically. The router does not reload. This vulnerability only applies to DHCPv4. DHCP version 6 (DHCPv6) is not affected.
A vulnerability in the SSH server of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition for the SSH server of an affected device. This vulnerability is due to a logic error when an SSH session is established. An attacker could exploit this vulnerability by sending crafted SSH messages to an affected device. A successful exploit could allow the attacker to exhaust available SSH resources on the affected device so that new SSH connections to the device are denied, resulting in a DoS condition. Existing SSH connections to the device would continue to function normally. The device must be rebooted manually to recover. However, user traffic would not be impacted and could be managed using a remote application such as Cisco Adaptive Security Device Manager (ASDM).
A vulnerability in the IKEv1 fragmentation code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a heap overflow, resulting in an affected device reloading. This vulnerability exists because crafted, fragmented IKEv1 packets are not properly reassembled. An attacker could exploit this vulnerability by sending crafted UDP packets to an affected system. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Only traffic that is directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered by IPv4 and IPv6 traffic.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business SPA300 Series IP Phones and Cisco Small Business SPA500 Series IP Phones could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly. These vulnerabilities exist because HTTP packets are not properly checked for errors. An attacker could exploit this vulnerability by sending a crafted HTTP packet to the remote interface of an affected device. A successful exploit could allow the attacker to cause a DoS condition on the device.
A vulnerability in the Snort 2 and Snort 3 TCP and UDP detection engine of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause memory corruption, which could cause the Snort detection engine to restart unexpectedly. This vulnerability is due to improper memory management when the Snort detection engine processes specific TCP or UDP packets. An attacker could exploit this vulnerability by sending crafted TCP or UDP packets through a device that is inspecting traffic using the Snort detection engine. A successful exploit could allow the attacker to restart the Snort detection engine repeatedly, which could cause a denial of service (DoS) condition. The DoS condition impacts only the traffic through the device that is examined by the Snort detection engine. The device can still be managed over the network. Note: Once a memory block is corrupted, it cannot be cleared until the Cisco Firepower 2100 Series Appliance is manually reloaded. This means that the Snort detection engine could crash repeatedly, causing traffic that is processed by the Snort detection engine to be dropped until the device is manually reloaded.
A vulnerability in the HTML parser of ClamAV could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to an issue in the C to Rust foreign function interface. An attacker could exploit this vulnerability by submitting a crafted file containing HTML content to be scanned by ClamAV on an affected device. An exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software.