A vulnerability was found in bg5sbk MiniCMS up to 1.8. The impacted element is an unknown function of the file /minicms/mc-admin/post.php of the component Trash File Restore Handler. Performing a manipulation results in improper authentication. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

The device does not properly authenticate users and the potential exists for a remote user to upload a new firmware image to the Ethernet card, whether it is a corrupt or legitimate firmware image. Successful exploitation of this vulnerability could cause loss of availability, integrity, and confidentiality and a disruption in communications with other connected devices. Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400

Apache Shiro before 1.7.1, when using Apache Shiro with Spring, a specially crafted HTTP request may cause an authentication bypass.

Apache Shiro before 1.10.0, Authentication Bypass Vulnerability in Shiro when forwarding or including via RequestDispatcher.

The Alloggio Membership plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 1.0.2. This is due to the plugin not properly validating a user's identity through the alloggio_membership_init_rest_api_facebook_login and alloggio_membership_init_rest_api_google_login functions. This makes it possible for unauthenticated attackers to log in as any user, including administrators, without knowing a password.

The WPCOM Member plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.7.5. This is due to insufficient verification on the 'user_phone' parameter when logging in. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if SMS login is enabled.

A flaw in the Zyxel LTE3301-M209 firmware verisons prior to V1.00(ABLG.6)C0 could allow a remote attacker to access the device using an improper pre-configured password if the remote administration feature has been enabled by an authenticated administrator.

iked in OpenIKED, as used in OpenBSD through 6.7, allows authentication bypass because ca.c has the wrong logic for checking whether a public key matches.

Lorex LNC116 and LNC104 IP Cameras have a Remote Authentication Bypass Vulnerability

D-Link DIR-601 B1 2.00NA devices are vulnerable to authentication bypass. They do not check for authentication at the server side and rely on client-side validation, which is bypassable. NOTE: this is an end-of-life product.

wolfSSH’s key exchange state machine can be manipulated to leak the client’s password in the clear, trick the client to send a bogus signature, or trick the client into skipping user authentication. This affects client applications with wolfSSH version 1.4.21 and earlier. Users of wolfSSH must update or apply the fix patch and it’s recommended to update credentials used. This fix is also recommended for wolfSSH server applications. While there aren’t any specific attacks on server applications, the same defect is present. Thanks to Aina Toky Rasoamanana of Valeo and Olivier Levillain of Telecom SudParis for the report.

A vulnerability was determined in Technostrobe HI-LED-WR120-G2 5.5.0.1R6.03.30. The affected element is the function index_config of the file /LoginCB. This manipulation causes improper authentication. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

The FindAll Membership plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 1.0.4. This is due to the plugin not properly logging in a user with the data that was previously verified through the 'findall_membership_check_facebook_user' and the 'findall_membership_check_google_user' functions. This makes it possible for unauthenticated attackers to log in as administrative users, as long as they have an existing account on the site which can easily be created by default through the temp user functionality, and access to the administrative user's email.

SharePort Web Access on D-Link DIR-868L REVB through 2.03, DIR-885L REVA through 1.20, and DIR-895L REVA through 1.21 devices allows Authentication Bypass, as demonstrated by a direct request to folder_view.php or category_view.php.

Use of Default Password vulnerability in ABB RCCMD on Windows, Linux, MacOS allows Try Common or Default Usernames and Passwords.This issue affects RCCMD: before 4.40 230207.

The InWave Jobs plugin for WordPress is vulnerable to privilege escalation via password reset in all versions up to, and including, 3.5.1. This is due to the plugin not properly validating a user's identity prior to updating their password. This makes it possible for unauthenticated attackers to change arbitrary user's passwords, including administrators, and leverage that to gain access to their account.

EXFO - BV-10 Performance Endpoint Unit authentication bypass User can manually manipulate access enabling authentication bypass.

Veritas APTARE versions prior to 10.4 included code that bypassed the normal login process when specific authentication credentials were provided to the server.

The WLAN module has a vulnerability in permission verification. Successful exploitation of this vulnerability may cause third-party apps to affect WLAN functions.

The fingerprint module has service logic errors.Successful exploitation of this vulnerability will cause the phone lock to be cracked.

The Email Verification, Email OTP, Block Spam Email, Passwordless login, Hide Login, Magic Login – User Verification plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 2.0.44. This is due to the plugin not properly validating that an OTP was generated before comparing it to user input in the "user_verification_form_wrap_process_otpLogin" function. This makes it possible for unauthenticated attackers to log in as any user with a verified email address, such as an administrator, by submitting an empty OTP value.

The Dingtian DT-R0 Series is vulnerable to an exploit that allows attackers to bypass login requirements by directly navigating to the main page.

A vulnerability in Trend Micro Apex One and Trend Micro Apex One as a Service could allow an attacker to bypass the product's login authentication by falsifying request parameters on affected installations.

A vulnerability was found in ProjectsAndPrograms School Management System up to 6b6fae5426044f89c08d0dd101c7fa71f9042a59. This affects an unknown part. Performing manipulation results in missing authentication. The attack is possible to be carried out remotely. The exploit has been made public and could be used. This product adopts a rolling release strategy to maintain continuous delivery

A flaw has been found in 70mai X200 up to 20251010. Affected is an unknown function of the component Pairing. Executing manipulation can lead to missing authentication. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Improper host authentication vulnerability in wolfSSH version 1.4.20 and earlier clients that allows authentication bypass and leaking of clients credentials.

The BrowserID (Mozilla Persona) module 7.x-1.x before 7.x-1.3 for Drupal allows remote attackers to hijack the authentication of arbitrary users via the audience identifier.

A vulnerability has been found in D-Link DHP-W310AV 1.04 and classified as critical. This vulnerability affects unknown code. The manipulation leads to authentication bypass by spoofing. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

Vulnerabilities in the web-based management interface of Aruba EdgeConnect Enterprise Orchestrator could allow an unauthenticated remote attacker to bypass authentication. Successful exploitation of these vulnerabilities could allow an attacker to gain administrative privileges leading to a complete compromise of the Aruba EdgeConnect Enterprise Orchestrator with versions 9.1.2.40051 and below, 9.0.7.40108 and below, 8.10.23.40009 and below, and any older branches of Orchestrator not specifically mentioned.

A vulnerability was identified in samanhappy MCPHub up to 0.9.10. This vulnerability affects the function handleSseConnectionfunction of the file src/services/sseService.ts. Such manipulation leads to improper authentication. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in the YugabyteDB 2.6.1 when using LDAP-based authentication in YCQL with Microsoft’s Active Directory. When anonymous or unauthenticated LDAP binding is enabled, it allows bypass of authentication with an empty password.

The Nextend Social Login Pro plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 3.1.16. This is due to insufficient verification on the user being supplied during the Apple OAuth authenticate request through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email.

Logsign Unified SecOps Platform Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of Logsign Unified SecOps Platform. Authentication is not required to exploit this vulnerability. The specific flaw exists within the web service, which listens on TCP port 443 by default. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-25336.

The OwnID Passwordless Login plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 1.3.4. This is due to the plugin not properly checking if the ownid_shared_secret value is empty prior to authenticating a user via JWT. This makes it possible for unauthenticated attackers to log in as other users, including administrators, on instances where the plugin has not been fully configured yet.

In JetBrains Space through 2020-04-22, the password authentication implementation was insecure.

D-Link DIR845L v1.00-v1.03 contains a Static Default Credential vulnerability in /etc/init0.d/S80telnetd.sh.

Shinken Solutions Shinken Monitoring Version 2.4.3 affected is vulnerable to Incorrect Access Control. The SafeUnpickler class found in shinken/safepickle.py implements a weak authentication scheme when unserializing objects passed from monitoring nodes to the Shinken monitoring server.

The Registration & Login with Mobile Phone Number for WooCommerce plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 1.3.1. This is due to the plugin not properly verifying a users identity prior to authenticating them via the fma_lwp_set_session_php_fun() function. This makes it possible for unauthenticated attackers to authenticate as any user on the site, including administrators, without a valid password.

The Nextend Social Login Pro plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 3.1.14. This is due to insufficient verification on the user being returned by the social login token. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email and the user does not have an already-existing account for the service returning the token.

The Micro Air Vehicle Link (MAVLink) protocol presents authentication mechanisms on its version 2.0 however according to its documentation, in order to maintain backwards compatibility, GCS and autopilot negotiate the version via the AUTOPILOT_VERSION message. Since this negotiation depends on the answer, an attacker may craft packages in a way that hints the autopilot to adopt version 1.0 of MAVLink for the communication. Given the lack of authentication capabilities in such version of MAVLink (refer to CVE-2020-10282), attackers may use this method to bypass authentication capabilities and interact with the autopilot directly.

BigAntSoft BigAnt Server, up to and including version 5.6.06, is vulnerable to unauthenticated remote code execution via account registration. An unauthenticated remote attacker can create an administrative user through the default exposed SaaS registration mechanism. Once an administrator, the attacker can upload and execute arbitrary PHP code using the "Cloud Storage Addin," leading to unauthenticated code execution.

Vulnerabilities in the web-based management interface of Aruba EdgeConnect Enterprise Orchestrator could allow an unauthenticated remote attacker to bypass authentication. Successful exploitation of these vulnerabilities could allow an attacker to gain administrative privileges leading to a complete compromise of the Aruba EdgeConnect Enterprise Orchestrator with versions 9.1.2.40051 and below, 9.0.7.40108 and below, 8.10.23.40009 and below, and any older branches of Orchestrator not specifically mentioned.

UPSMON Pro login function has insufficient authentication. An unauthenticated remote attacker can exploit this vulnerability to bypass authentication and get administrator privilege to access, control system or disrupt service.

The Wux Blog Editor plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 3.0.0. This is due to missing validation on the token being supplied during the autologin through the plugin. This makes it possible for unauthenticated attackers to log in to the first administrator user.

The WP Foodbakery plugin for WordPress is vulnerable to privilege escalation via account takeover in all versions up to, and including, 4.8. This is due to the plugin not properly validating a user's identity prior to setting the current user and their authentication cookie. This makes it possible for unauthenticated attackers to gain access to a target user's (e.g. administrators) account.

Multiple Elber products are affected by an authentication bypass vulnerability which allows unauthorized access to the password management functionality. Attackers can exploit this issue by manipulating the endpoint to overwrite any user's password within the system. This grants them unauthorized administrative access to protected areas of the application, compromising the device's system security.

This vulnerability allows remote attackers to bypass authentication on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of SSH port forwarding requests during initial setup. The issue results from the lack of proper authentication prior to establishing SSH port forwarding rules. An attacker can leverage this vulnerability to escalate privileges to resources normally protected from the WAN interface. Was ZDI-CAN-9664.

The Limit Login Attempts plugin before 1.7.1 for WordPress does not clear auth cookies upon a lockout, which might make it easier for remote attackers to conduct brute-force authentication attempts.

The WP Directorybox Manager plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.5. This is due to incorrect authentication in the 'wp_dp_enquiry_agent_contact_form_submit_callback' function. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the username.

**UNSUPPORTED WHEN ASSIGNED** Insecure default credentials for the Telnet function in the legacy DSL CPE Zyxel VMG4325-B10A firmware version 1.00(AAFR.4)C0_20170615 could allow an attacker to log in to the management interface if the administrators have the option to change the default credentials but fail to do so.