Stack-based buffer overflow vulnerability exists in OnSinView2 versions 2.0.1 and earlier. If this vulnerability is exploited, information may be disclosed or arbitrary code may be executed by having a user open a specially crafted OnSinView2 project file.

Out-of-bounds write vulnerability exists in Kostac PLC Programming Software (Former name: Koyo PLC Programming Software) Version 1.6.14.0 and earlier. Having a user open a specially crafted project file which was saved using Kostac PLC Programming Software Version 1.6.9.0 and earlier may cause a denial-of-service (DoS) condition, arbitrary code execution, and/or information disclosure because the issues exist in parsing of KPP project files.

Stack-based buffer overflow vulnerability exists in Kostac PLC Programming Software (Former name: Koyo PLC Programming Software) Version 1.6.14.0 and earlier. Having a user open a specially crafted project file which was saved using Kostac PLC Programming Software Version 1.6.9.0 and earlier may cause a denial-of-service (DoS) condition, arbitrary code execution, and/or information disclosure because the issues exist in parsing of KPP project files.

Improper restriction of operations within the bounds of a memory buffer issue exists in OnSinView2 versions 2.0.1 and earlier. If this vulnerability is exploited, information may be disclosed or arbitrary code may be executed by having a user open a specially crafted OnSinView2 project file.

Use after free vulnerability exists in Kostac PLC Programming Software Version 1.6.11.0. Arbitrary code may be executed by having a user open a specially crafted project file which was saved using Kostac PLC Programming Software Version 1.6.9.0 and earlier because the issue exists in parsing of KPP project files. The vendor states that Kostac PLC Programming Software Version 1.6.10.0 or later implements the function which prevents a project file alteration. Therefore, to mitigate the impact of these vulnerabilities, a project file which was saved using Kostac PLC Programming Software Version 1.6.9.0 and earlier needs to be saved again using Kostac PLC Programming Software Version 1.6.10.0 or later.

Screen Creator Advance 2 Ver.0.1.1.4 Build01A and earlier is vulnerable to improper restriction of operations within the bounds of a memory buffer (CWE-119) due to improper check of its data size when processing a project file. If a user of Screen Creator Advance 2 opens a specially crafted project file, information may be disclosed and/or arbitrary code may be executed.

Use-after-free vulnerability exists in Kostac PLC Programming Software (Former name: Koyo PLC Programming Software) Version 1.6.9.0 and earlier. With the abnormal value given as the maximum number of columns for the PLC program, the process accesses the freed memory. As a result, opening a specially crafted project file may lead to information disclosure and/or arbitrary code execution.

Out-of-bounds read vulnerability exists in Kostac PLC Programming Software (Former name: Koyo PLC Programming Software) Version 1.6.9.0 and earlier. When processing a comment block in stage information, the end of data cannot be verified and out-of-bounds read occurs. As a result, opening a specially crafted project file may lead to information disclosure and/or arbitrary code execution.

Out-of-bounds read vulnerability exists in Kostac PLC Programming Software (Former name: Koyo PLC Programming Software) Version 1.6.9.0 and earlier. The insufficient buffer size for the PLC program instructions leads to out-of-bounds read. As a result, opening a specially crafted project file may lead to information disclosure and/or arbitrary code execution.

Out-of-bound read vulnerability exists in Screen Creator Advance 2 Ver.0.1.1.4 Build01 and earlier because the end of data cannot be verified when processing template information. Having a user of Screen Creator Advance 2 to open a specially crafted project file may lead to information disclosure and/or arbitrary code execution.

Out-of-bound read vulnerability exists in Screen Creator Advance 2 Ver.0.1.1.4 Build01 and earlier because the end of data cannot be verified when processing control management information. Having a user of Screen Creator Advance 2 to open a specially crafted project file may lead to information disclosure and/or arbitrary code execution.

Out-of-bound read vulnerability exists in Screen Creator Advance 2 Ver.0.1.1.4 Build01 and earlier because the end of data cannot be verified when processing parts management information. Having a user of Screen Creator Advance 2 to open a specially crafted project file may lead to information disclosure and/or arbitrary code execution.

Use-after free vulnerability exists in Screen Creator Advance 2 Ver.0.1.1.4 Build01 and earlier due to lack of error handling process even when an error was detected. Having a user of Screen Creator Advance 2 to open a specially crafted project file may lead to information disclosure and/or arbitrary code execution.

Out-of-bound read vulnerability exists in Screen Creator Advance 2 Ver.0.1.1.4 Build01 and earlier because the end of data cannot be verified when processing screen management information. Having a user of Screen Creator Advance 2 to open a specially crafted project file may lead to information disclosure and/or arbitrary code execution.

Out-of-bound read vulnerability exists in Screen Creator Advance 2 Ver.0.1.1.4 Build01 and earlier because the end of data cannot be verified when processing file structure information. Having a user of Screen Creator Advance 2 to open a specially crafted project file may lead to information disclosure and/or arbitrary code execution.

Out-of-bounds read vulnerability exists in Kostac PLC Programming Software (Former name: Koyo PLC Programming Software) Version 1.6.14.0 and earlier. Having a user open a specially crafted project file which was saved using Kostac PLC Programming Software Version 1.6.9.0 and earlier may cause a denial-of-service (DoS) condition, arbitrary code execution, and/or information disclosure because the issues exist in parsing of KPP project files.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of KOYO Screen Creator 0.1.1.1. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of SCA2 files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-14868.

Double free issue exists in Kostac PLC Programming Software Version 1.6.11.0 and earlier. Arbitrary code may be executed by having a user open a specially crafted project file which was saved using Kostac PLC Programming Software Version 1.6.9.0 and earlier because the issue exists in parsing of KPP project files. The vendor states that Kostac PLC Programming Software Version 1.6.10.0 or later implements the function which prevents a project file alteration. Therefore, to mitigate the impact of these vulnerabilities, a project file which was saved using Kostac PLC Programming Software Version 1.6.9.0 and earlier needs to be saved again using Kostac PLC Programming Software Version 1.6.10.0 or later.

When JTEKT Corporation TOYOPUC PLC versions PC10G-CPU, 2PORT-EFR, Plus CPU, Plus EX, Plus EX2, Plus EFR, Plus EFR2, Plus 2P-EFR, PC10P-DP, PC10P-DP-IO, Plus BUS-EX, Nano 10GX, Nano 2ET,PC10PE, PC10PE-16/16P, PC10E, FL/ET-T-V2H, PC10B,PC10B-P, Nano CPU, PC10P, and PC10GE receive an invalid frame, the outside area of a receive buffer for FL-net are overwritten. As a result, the PLC CPU detects a system error, and the affected products stop.

Adobe Photoshop versions 23.0.2 and 22.5.4 (and earlier) are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious JPG file.

An issue was discovered in swftools through 20201222. A heap-buffer-overflow exists in the function swf_GetBits() located in rfxswf.c. It allows an attacker to cause code execution.

An Out-of-Bounds Write vulnerability exists when reading a DXF or DWG file using Open Design Alliance Drawings SDK before 2022.11. The specific issue exists within the parsing of DXF and DWG files. Crafted data in a DXF or DWG file (an invalid number of properties) can trigger a write operation past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process.

Kofax Power PDF GIF File Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Kofax Power PDF. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of GIF files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20373.

Adobe Premiere Rush version 1.5.16 (and earlier) is affected by a memory corruption vulnerability due to insecure handling of a malicious M4A file, potentially resulting in arbitrary code execution in the context of the current user. User interaction is required to exploit this vulnerability.

Adobe Premiere Rush version 1.5.16 (and earlier) is affected by a memory corruption vulnerability due to insecure handling of a malicious SVG file, potentially resulting in arbitrary code execution in the context of the current user. User interaction is required to exploit this vulnerability.

A maliciously crafted JPG file, when linked or imported into certain Autodesk applications, can force a Heap-Based Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.

LAquis SCADA Versions 4.1.0.3870 and prior has several stack-based buffer overflow vulnerabilities, which may allow remote code execution.

ATasm 1.06 has a stack-based buffer overflow in the to_comma() function in asm.c via a crafted .m65 file.

A maliciously crafted DWG file, when parsed through certain Autodesk applications, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process.

Adobe Premiere Rush version 1.5.16 (and earlier) is affected by a memory corruption vulnerability due to insecure handling of a malicious M4A file, potentially resulting in arbitrary code execution in the context of the current user. User interaction is required to exploit this vulnerability.

An issue was discovered in Open Design Alliance Drawings SDK before 2024.12. A corrupted value of number of sectors used by the Fat structure in a crafted DGN file leads to an out-of-bounds write. An attacker can leverage this vulnerability to execute code in the context of the current process.

XMP Toolkit SDK version 2021.07 (and earlier) is affected by a stack-based buffer overflow vulnerability potentially resulting in arbitrary code execution in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted file.

A maliciously crafted PDF file, when linked or imported into Autodesk applications, can force a Heap-Based Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.

A maliciously crafted PDF file, when parsed through Autodesk applications, can force a Memory Corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process.

A maliciously crafted RCS file, when parsed through Autodesk Revit, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process.

An issue was discovered in swftools through 20201222. A heap-buffer-overflow exists in the function handleEditText() located in swfdump.c. It allows an attacker to cause code Execution.

An issue was discovered in swftools through 20201222. A heap buffer overflow exists in the function swf_FontExtract_DefineTextCallback() located in swftext.c. It allows an attacker to cause code execution.

A vulnerability has been identified in syngo fastView (All versions). The affected application lacks proper validation of user-supplied data when parsing BMP files. This could result in an out-of-bounds write past the end of an allocated structure. An attacker could leverage this vulnerability to execute code in the context of the current process. (ZDI-CAN-14860)

PLC Editor Versions 1.3.8 and prior is vulnerable to an out-of-bounds write while processing project files, which may allow an attacker to execute arbitrary code.

In exiftags 1.01, nikon_prop1 in nikon.c has a heap-based buffer overflow (write of size 28) because snprintf can write to an unexpected address.

WECON LeviStudioU Versions 2019-09-21 and prior are vulnerable to multiple stack-based buffer overflow instances while parsing project files, which may allow an attacker to execute arbitrary code.

XMP Toolkit SDK version 2021.07 (and earlier) is affected by a stack-based buffer overflow vulnerability potentially resulting in arbitrary code execution in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted file.

XMP Toolkit SDK version 2021.07 (and earlier) is affected by a stack-based buffer overflow vulnerability potentially resulting in arbitrary code execution in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted file.

Hancom Office Cell XLS File Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Hancom Office Cell. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of XLS files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20386.

Hancom Office Show PPT File Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Hancom Office Show. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PPT files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20387.

Delta Electronics DIAScreen may write past the end of an allocated buffer while parsing a specially crafted input file. This could allow an attacker to execute code in the context of the current process.

A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected applications contain a stack overflow vulnerability while parsing specially crafted PAR files. This could allow an attacker to execute code in the context of the current process.

Adobe Substance 3D Sampler versions 4.2.1 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

An unauthenticated local attacker may trick a user to open corrupted project files to execute arbitrary code or crash the system due to an out-of-bounds write vulnerability.

An out-of-bounds write vulnerability exists in the parse_raster_data functionality of Accusoft ImageGear 19.10. A specially-crafted malformed file can lead to memory corruption. An attacker can provide a malicious file to trigger this vulnerability.