The laser command injection vulnerability exists on AIS-BW80H-00 versions earlier than AIS-BW80H-00 9.0.3.4(H100SP13C00). The devices cannot effectively defend against external malicious interference. Attackers need the device to be visually exploitable and successful triggering of this vulnerability could execute voice commands on the device.

HPE OneView may allow command injection with local privilege escalation.

An Improper Neutralization of Special Elements used in a Command vulnerability in one of FortiClient for Mac OS root processes, may allow a local user of the system on which FortiClient is running to execute unauthorized code as root by bypassing a security check.

A command injection vulnerability in tcpdump command processing on Juniper Networks Junos OS Evolved allows an attacker with authenticated CLI access to be able to bypass configured access protections to execute arbitrary shell commands within the context of the current user. The vulnerability allows an attacker to bypass command authorization restrictions assigned to their specific user account and execute commands that are available to the privilege level for which the user is assigned. For example, a user that is in the super-user login class, but restricted to executing specific CLI commands could exploit the vulnerability to execute any other command available to an unrestricted admin user. This vulnerability does not increase the privilege level of the user, but rather bypasses any CLI command restrictions by allowing full access to the shell. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.3R2-S1-EVO; 20.4 versions prior to 20.4R2-S2-EVO; 21.1 versions prior to 21.1R2-EVO; 21.2 versions prior to 21.2R1-S1-EVO, 21.2R2-EVO.

close_altfile in filename.c in less before 606 omits shell_quote calls for LESSCLOSE.

Pi-hole is a Linux network-level advertisement and Internet tracker blocking application. Multiple privilege escalation vulnerabilities were discovered in version 5.2.4 of Pi-hole core. See the referenced GitHub security advisory for details.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

A command injection is possible through the user interface, allowing arbitrary command execution as the root user. oMG2000 running MGOS 3.15.1 or earlier is affected.  MG90 running MGOS 4.2.1 or earlier is affected.

Accellion FTA 9_12_411 and earlier is affected by OS command execution via a local web service call. The fixed version is FTA_9_12_416 and later.

In SaltStack Salt 2016.9 through 3002.6, a command injection vulnerability exists in the snapper module that allows for local privilege escalation on a minion. The attack requires that a file is created with a pathname that is backed up by snapper, and that the master calls the snapper.diff function (which executes popen unsafely).

An OS command injection (CWE-78) vulnerability in FortiWAN version 4.5.7 and below Command Line Interface may allow a local, authenticated and unprivileged attacker to escalate their privileges to root via executing a specially-crafted command.An OS command injection (CWE-78) vulnerability in FortiWAN Command Line Interface may allow a local, authenticated and unprivileged attacker to escalate their privileges to root via executing a specially-crafted command.

Phicomm K2G v22.6.3.20 was discovered to contain a command injection vulnerability via the autoUpTime parameter in the automatic upgrade function.

Pi-hole 4.4 allows a user able to write to /etc/pihole/dns-servers.conf to escalate privileges through command injection (shell metacharacters after an IP address).

Shell Injection vulnerability GL.iNet A1300 v4.4.6, AX1800 v4.4.6, AXT1800 v4.4.6, MT3000 v4.4.6, MT2500 v4.4.6, MT6000 v4.5.0, MT1300 v4.3.7, MT300N-V2 v4.3.7, AR750S v4.3.7, AR750 v4.3.7, AR300M v4.3.7, and B1300 v4.3.7., allows local attackers to execute arbitrary code via the get_system_log and get_crash_log functions of the logread module, as well as the upgrade_online function of the upgrade module.

Multiple OS command injection (CWE-78) vulnerabilities in the command line interface of FortiManager 6.2.7 and below, 6.4.5 and below and all versions of 6.2.x, 6.0.x and 5.6.x, FortiAnalyzer 6.2.7 and below, 6.4.5 and below and all versions of 6.2.x, 6.0.x and 5.6.x, and FortiPortal 5.2.5 and below, 5.3.5 and below and 6.0.4 and below may allow a local authenticated and unprivileged user to execute arbitrary shell commands as root via specifically crafted CLI command parameters.

SSH authenticated user when access the PAM server can execute an OS command to gain the full system access using bash. This issue affects Privileged Access Manager before 3.7.0.1.

Valve Source allows local users to gain privileges by writing to the /tmp/hl2_relaunch file, which is later executed in the context of a different user account.

An improper input validation in FortiAI v1.4.0 and earlier may allow an authenticated user to gain system shell access via a malicious payload in the "diagnose" command.

The 'Copy as cURL' feature of Devtools' network tab did not properly escape the HTTP method of a request, which can be controlled by the website. If a user used the 'Copy as cURL' feature and pasted the command into a terminal, it could have resulted in command injection and arbitrary command execution. *Note: this issue only affects Firefox on Windows operating systems.*. This vulnerability affects Firefox ESR < 68.8, Firefox < 76, and Thunderbird < 68.8.0.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiDDoS version 5.5.0 through 5.5.1, 5.4.2 through 5.4.0, 5.3.0 through 5.3.1, 5.2.0, 5.1.0, 5.0.0, 4.7.0, 4.6.0 and 4.5.0 and FortiDDoS-F version 6.3.0 through 6.3.1, 6.2.0 through 6.2.2, 6.1.0 through 6.1.4 allows an authenticated attacker to execute shell code as `root` via `execute` CLI commands.

Dell SmartFabric Storage Software v1.4 (and earlier) contains an OS Command Injection Vulnerability in the CLI use of the ‘more’ command. A local or remote authenticated attacker could potentially exploit this vulnerability, leading to the ability to gain root-level access.

In Autoswitch Python Virtualenv before version 0.16.0, a user who enters a directory with a malicious `.venv` file could run arbitrary code without any user interaction. This is fixed in version: 1.16.0

PowerScale OneFS 8.1.2,8.2.2 and 9.1.0 contains an improper input sanitization issue in a command. The Compadmin user could potentially exploit this vulnerability, leading to potential privileges escalation.

OS command injection vulnerability exists in CENTUM VP R4.01.00 to R4.03.00, CENTUM VP Small R4.01.00 to R4.03.00, CENTUM VP Basic R4.01.00 to R4.03.00, and B/M9000 VP R6.01.01 to R6.03.02, which may allow an attacker who can access the computer where the affected product is installed to execute an arbitrary OS command by altering a file generated using Graphic Builder.

Versions of the package window-control before 1.4.5 are vulnerable to Command Injection via the sendKeys function, due to improper input sanitization.

The System Information Library for Node.JS (npm package "systeminformation") is an open source collection of functions to retrieve detailed hardware, system and OS information. In systeminformation before version 5.3.1 there is a command injection vulnerability. Problem was fixed in version 5.3.1. As a workaround instead of upgrading, be sure to check or sanitize service parameters that are passed to si.inetLatency(), si.inetChecksite(), si.services(), si.processLoad() ... do only allow strings, reject any arrays. String sanitation works as expected.

Privilege Escalation vulnerability in McAfee Management of Native Encryption (MNE) before 4.1.4 allows local users to gain elevated privileges via a crafted user input.

Dell PowerProtect DD, versions prior to 7.13.0.10, LTS 7.7.5.25, LTS 7.10.1.15, 6.2.1.110 contain an OS command injection vulnerability in the CLI. A local low privileged attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker.

An exploitable vulnerability exists in the verified boot protection of the CUJO Smart Firewall. It is possible to add arbitrary shell commands into the dhcpd.conf file, that persist across reboots and firmware updates, and thus allow for executing unverified commands. To trigger this vulnerability, a local attacker needs to be able to write into /config/dhcpd.conf.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to perform a command injection attack on an affected device. The vulnerability is due to insufficient validation of user-supplied input to a configuration command. An attacker could exploit this vulnerability by including malicious input during the execution of this command. A successful exploit could allow a non-privileged attacker authenticated in the restricted CLI to execute arbitrary commands on the underlying operating system (OS) with root privileges.

PAX Android based POS devices with PayDroid_8.1.0_Sagittarius_V11.1.50_20230614 or earlier can allow the execution of arbitrary commands with system account privilege by shell injection starting with a specific word. The attacker must have shell access to the device in order to exploit this vulnerability.

A vulnerability in a CLI command of Cisco IOS XR Software for the Cisco 8000 Series Routers and Network Convergence System 540 Series Routers running NCS540L software images could allow an authenticated, local attacker to elevate their privilege to root. To exploit this vulnerability, an attacker would need to have a valid account on an affected device. The vulnerability is due to insufficient validation of command line arguments. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the prompt. A successful exploit could allow an attacker with low-level privileges to escalate their privilege level to root.

NFX Series devices using Juniper Networks Junos OS are susceptible to a local command execution vulnerability thereby allowing an attacker to elevate their privileges via the Junos Device Management Daemon (JDMD) process. This issue affects Juniper Networks Junos OS on NFX Series 17.2 version 17.2R1 and later versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S5, 18.4R3-S5; 19.1 versions prior to 19.1R1-S3; 19.2 version 19.1R2 and later versions prior to 19.2R3; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2-S2. 19.4 versions 19.4R3 and above. This issue does not affect Juniper Networks Junos OS versions prior to 17.2R1. This issue does not affect the JDMD as used by Junos Node Slicing such as External Servers use in conjunction with Junos Node Slicing and In-Chassis Junos Node Slicing on MX480, MX960, MX2008, MX2010, MX2020.

Multiple vulnerabilities in the CLI of Cisco FXOS Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute commands on the underlying operating system (OS) with root privileges. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by including crafted arguments to specific CLI commands. A successful exploit could allow the attacker to execute commands on the underlying OS with root privileges.

All versions of the package semver-tags are vulnerable to Command Injection via the getGitTagsRemote function due to improper input sanitization.

Dell Unity prior to 5.3 contains a Restricted Shell Bypass vulnerability. This could allow an authenticated, local attacker to exploit this vulnerability by authenticating to the device CLI and issuing certain commands.

Dell SmartFabric Storage Software v1.4 (and earlier) contains an OS Command Injection Vulnerability in the restricted shell in SSH. An authenticated remote attacker could potentially exploit this vulnerability, leading to execute arbitrary commands.

An improper neutralization of special elements used in an os command ('OS Command Injection') vulnerability [CWE-78] in FortiManager & FortiAnalyzer version 7.4.0, version 7.2.0 through 7.2.3, version 7.0.0 through 7.0.8, version 6.4.0 through 6.4.12 and version 6.2.0 through 6.2.11 may allow a local attacker with low privileges to execute unauthorized code via specifically crafted arguments to a CLI command

A Command Execution Vulnerability exists in IBM Sterling External Authentication Server 2.2.0, 2.3.01, 2.4.0, and 2.4.1 via an unspecified OS command, which could let a local malicious user execute arbitrary code.

A command injection vulnerability in the license-check daemon of Juniper Networks Junos OS that may allow a locally authenticated attacker with low privileges to execute commands with root privilege. license-check is a daemon used to manage licenses in Junos OS. To update licenses, a user executes the command 'request system license update' via the CLI. An attacker with access to this CLI command may be able to exploit the vulnerability. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S4, 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2.

Dell SmartFabric Storage Software v1.4 (and earlier) contain(s) an OS Command Injection Vulnerability in the CLI. An authenticated local attacker could potentially exploit this vulnerability, leading to possible injection of parameters to curl or docker.

A privilege escalation in the EdgeSwitch prior to version 1.7.1, an CGI script don't fully sanitize the user input resulting in local commands execution, allowing an operator user (Privilege-1) to escalate privileges and became administrator (Privilege-15).

OS Command Injection vulnerability in the wirelessConnect handler of Abode iota All-In-One Security Kit allows an attacker to inject commands and gain root access. This issue affects: Abode iota All-In-One Security Kit versions prior to 1.0.2.23_6.9V_dev_t2_homekit_RF_2.0.19_s2_kvsABODE oz.

Versions of the package mt7688-wiscan before 0.8.3 are vulnerable to Command Injection due to improper input sanitization in the 'wiscan.scan' function.

PAX A930 device with PayDroid_7.1.1_Virgo_V04.3.26T1_20210419 can allow an attacker to gain root access through command injection in systool client. The attacker must have shell access to the device in order to exploit this vulnerability.

AppUse 4.0 allows shell command injection via a proxy field.

All versions of the package is-http2 are vulnerable to Command Injection due to missing input sanitization or other checks, and sandboxes being employed to the isH2 function.