In NetHack before 3.6.5, detecting an unknown configuration file option can cause a buffer overflow resulting in a crash or remote code execution/privilege escalation. This vulnerability affects systems that have NetHack installed suid/sgid and shared systems that allow users to upload their own configuration files. Users should upgrade to NetHack 3.6.5.

In NetHack before 3.6.5, an extremely long value for the MENUCOLOR configuration file option can cause a buffer overflow resulting in a crash or remote code execution/privilege escalation. This vulnerability affects systems that have NetHack installed suid/sgid and shared systems that allow users to upload their own configuration files. Users should upgrade to NetHack 3.6.5.

In NetHack before 3.6.5, an invalid argument to the -w command line option can cause a buffer overflow resulting in a crash or remote code execution/privilege escalation. This vulnerability affects systems that have NetHack installed suid/sgid and shared systems that allow users to influence command line options. Users should upgrade to NetHack 3.6.5.

In NetHack before 3.6.5, unknown options starting with -de and -i can cause a buffer overflow resulting in a crash or remote code execution/privilege escalation. This vulnerability affects systems that have NetHack installed suid/sgid and shared systems that allow users to influence command line options. Users should upgrade to NetHack 3.6.5.

In NetHack before 3.6.5, too long of a value for the SYMBOL configuration file option can cause a buffer overflow resulting in a crash or remote code execution/privilege escalation. This vulnerability affects systems that have NetHack installed suid/sgid and shared systems that allow users to upload their own configuration files. Users should upgrade to NetHack 3.6.5.

In NetHack before 3.6.5, an invalid extended command in value for the AUTOCOMPLETE configuration file option can cause a buffer overflow resulting in a crash or remote code execution/privilege escalation. This vulnerability affects systems that have NetHack installed suid/sgid and shared systems that allow users to upload their own configuration files. Users should upgrade to NetHack 3.6.5.

NetHack 3.6.x before 3.6.4 is prone to a buffer overflow vulnerability when reading very long lines from configuration files. This affects systems that have NetHack installed suid/sgid, and shared systems that allow users to upload their own configuration files.

Buffer overflow in (1) nethack 3.4.0 and earlier, and (2) falconseye 1.9.3 and earlier, which is based on nethack, allows local users to gain privileges via a long -s command line option.

The buffer overflow vulnerability in the DX3300-T1 firmware version V5.50(ABVY.4)C0 could allow an authenticated local attacker to cause denial of service (DoS) conditions by executing the CLI command with crafted strings on an affected device.

AbsoluteTelnet 11.12 contains a denial of service vulnerability in the SSH2 username input field that allows local attackers to crash the application. Attackers can overwrite the username field with a 1000-byte buffer, causing the application to become unresponsive and terminate.

AbsoluteTelnet 11.12 contains a denial of service vulnerability that allows local attackers to crash the application by supplying an oversized license name. Attackers can generate a 2500-character payload and paste it into the license entry field to trigger an application crash.

TapinRadio 2.12.3 contains a denial of service vulnerability in the application proxy username configuration that allows local attackers to crash the application. Attackers can overwrite the username field with 10,000 bytes of arbitrary data to trigger an application crash and prevent normal program functionality.

Buffer copy without checking size of input ('Classic Buffer Overflow') vulnerability in cgi component in Synology SSL VPN Client before 1.4.7-0687 allows local users to conduct denial-of-service attacks via unspecified vectors.

AimOne Video Converter 2.04 Build 103 contains a buffer overflow vulnerability in its registration form that causes application crashes. Attackers can generate a 7000-byte payload to trigger the denial of service and potentially exploit the software's registration mechanism.

A buffer overflow vulnerability was found in the Linux kernel Intel’s iSMT SMBus host controller driver in the way it handled the I2C_SMBUS_BLOCK_PROC_CALL case (via the ioctl I2C_SMBUS) with malicious input data. This flaw could allow a local user to crash the system.

AbsoluteTelnet 11.12 contains a denial of service vulnerability that allows local attackers to crash the application by supplying an oversized license name. Attackers can generate a 2500-character payload and paste it into the license name field to trigger an application crash.

TensorFlow is an open source platform for machine learning. In version 2.8.0, the `TensorKey` hash function used total estimated `AllocatedBytes()`, which (a) is an estimate per tensor, and (b) is a very poor hash function for constants (e.g. `int32_t`). It also tried to access individual tensor bytes through `tensor.data()` of size `AllocatedBytes()`. This led to ASAN failures because the `AllocatedBytes()` is an estimate of total bytes allocated by a tensor, including any pointed-to constructs (e.g. strings), and does not refer to contiguous bytes in the `.data()` buffer. The discoverers could not use this byte vector anyway because types such as `tstring` include pointers, whereas they needed to hash the string values themselves. This issue is patched in Tensorflow versions 2.9.0 and 2.8.1.

A vulnerability in Cisco AMP for Endpoints Linux Connector Software and Cisco AMP for Endpoints Mac Connector Software could allow an authenticated, local attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted packet to an affected device. A successful exploit could allow the attacker to cause the Cisco AMP for Endpoints service to crash and restart.

The Relish (Verve Connect) VH510 device with firmware before 1.0.1.6L0516 contains a buffer overflow within its web management portal. When a POST request is sent to /boaform/admin/formDOMAINBLK with a large blkDomain value, the Boa server crashes.

Buffer Overflow vulnerability in libpng 1.6.43-1.6.46 allows a local attacker to cause a denial of service via the pngimage with AddressSanitizer (ASan), the program leaks memory in various locations, eventually leading to high memory usage and causing the program to become unresponsive

jq is a command-line JSON processor. Version 1.7 is vulnerable to stack-based buffer overflow in builds using decNumber. Version 1.7.1 contains a patch for this issue.

Buffer Overflow vulnerability in gdal 3.10.2 allows a local attacker to cause a denial of service via the OGRSpatialReference::Release function. NOTE: the Supplier indicates that the report is invalid and could not be reproduced.

A vulnerability has been identified in OpenV2G (V0.9.4). The OpenV2G EXI parsing feature is missing a length check when parsing X509 serial numbers. Thus, an attacker could introduce a buffer overflow that leads to memory corruption.

A potential buffer overflow vulnerability was identified in some internal functions of Zyxel VMG3312-T20A firmware version 5.30(ABFX.5)C0, which could be exploited by a local authenticated attacker to cause a denial of service.

in OpenHarmony v5.0.3 and prior versions allow a local attacker cause DOS through buffer overflow.

A vulnerability was found in the Linux kernel's nft_set_desc_concat_parse() function .This flaw allows an attacker to trigger a buffer overflow via nft_set_desc_concat_parse() , causing a denial of service and possibly to run code.

jq is a command-line JSON processor. Version 1.7 is vulnerable to heap-based buffer overflow. Version 1.7.1 contains a patch for this issue.

A buffer overflow vulnerability in Lenovo Smart Standby Driver prior to version 4.1.50.0 could allow a local attacker to cause denial of service.

Das U-Boot 2022.01 has a Buffer Overflow.

A denial of service vulnerability was reported in Lenovo Thin Installer prior to version 1.3.0039 that could trigger a system crash.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers Channel numbering must start at 0 and then not have any holes, or it is possible to overflow the available storage. Note this bug was introduced as part of a fix to ensure we didn't rely on the ordering of child nodes. So we need to support arbitrary ordering but they all need to be there somewhere. Note I hit this when using qemu to test the rest of this series. Arguably this isn't the best fix, but it is probably the most minimal option for backporting etc. Alexandru's sign-off is here because he carried this patch in a larger set that Jonathan then applied.

in OpenHarmony v5.0.2 and prior versions allow a local attacker cause DOS through buffer overflow.

in OpenHarmony v5.0.2 and prior versions allow a local attacker cause DOS through buffer overflow.

Buffer overflow in the array_from_pyobj function of fortranobject.c in NumPy < 1.19, which allows attackers to conduct a Denial of Service attacks by carefully constructing an array with negative values. NOTE: The vendor does not agree this is a vulnerability; the negative dimensions can only be created by an already privileged user (or internally)

TensorFlow is an open source platform for machine learning. In affected versions the shape inference function for `Transpose` is vulnerable to a heap buffer overflow. This occurs whenever `perm` contains negative elements. The shape inference function does not validate that the indices in `perm` are all valid. The fix will be included in TensorFlow 2.7.0. We will also cherrypick this commit on TensorFlow 2.6.1, TensorFlow 2.5.2, and TensorFlow 2.4.4, as these are also affected and still in supported range.

A stack corruption bug was found in libtpms in versions before 0.7.2 and before 0.8.0 while decrypting data using RSA. This flaw could result in a SIGBUS (bad memory access) and termination of swtpm. The highest threat from this vulnerability is to system availability.

ForeScout - SecureConnector Local Service DoS - A low privilaged user which doesn't have permissions to shutdown the secure connector service writes a large amount of characters in the installationPath. This will cause the buffer to overflow and override the stack cookie causing the service to crash.

Dell EMC CloudLink 7.1 and all prior versions contain a Buffer Overflow Vulnerability. A local low privileged attacker, may potentially exploit this vulnerability, leading to an application crash.

Buffer Overflow vulnerability in Avast AntiVirus before v.19.7 allows a local attacker to cause a denial of service via a crafted request to the aswSnx.sys driver.

Buffer Overflow vulnerability found in Libming swftophp v.0.4.8 allows a local attacker to cause a denial of service via the newVar_N in util/decompile.c.

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

Buffer overflow vulnerability in the component driver module Impact: Successful exploitation of this vulnerability may affect availability.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix not checking skb length on hci_acldata_packet This fixes not checking if skb really contains an ACL header otherwise the code may attempt to access some uninitilized/invalid memory past the valid skb->data.

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer The AD7923 was updated to support devices with 8 channels, but the size of tx_buf and ring_xfer was not increased accordingly, leading to a potential buffer overflow in ad7923_update_scan_mode().

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

In the Linux kernel, the following vulnerability has been resolved: clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access Flexible-array member `hws` in `struct clk_hw_onecell_data` is annotated with the `counted_by()` attribute. This means that when memory is allocated for this array, the _counter_, which in this case is member `num` in the flexible structure, should be set to the maximum number of elements the flexible array can contain, or fewer. In this case, the total number of elements for the flexible array is determined by variable `clks_num` when allocating heap space via `devm_kzalloc()`, as shown below: 289 struct loongson2_clk_provider *clp; ... 296 for (p = data; p->name; p++) 297 clks_num++; 298 299 clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num), 300 GFP_KERNEL); So, `clp->clk_data.num` should be set to `clks_num` or less, and not exceed `clks_num`, as is currently the case. Otherwise, if data is written into `clp->clk_data.hws[clks_num]`, the instrumentation provided by the compiler won't detect the overflow, leading to a memory corruption bug at runtime. Fix this issue by setting `clp->clk_data.num` to `clks_num`.

In the Linux kernel, the following vulnerability has been resolved: nvmet: Don't overflow subsysnqn nvmet_root_discovery_nqn_store treats the subsysnqn string like a fixed size buffer, even though it is dynamically allocated to the size of the string. Create a new string with kstrndup instead of using the old buffer.