TigerVNC version prior to 1.10.1 is vulnerable to heap buffer overflow, which occurs in TightDecoder::FilterGradient. Exploitation of this vulnerability could potentially result into remote code execution. This attack appear to be exploitable via network connectivity.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `band` parameter at offset `0x0045aad8` of the `httpd_portal` binary shipped with v5.1.0 Build 20220926 of the EAP225.

A stack-based buffer overflow vulnerability exists in the wireless.cgi AddMac() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Two stack-based buffer overflow vulnerabilities exist in the boa set_RadvdInterfaceParam functionality of Realtek rtl819x Jungle SDK v3.4.11. A specially crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This stack-based buffer overflow is related to the `interfacename` request's parameter.

TigerVNC version prior to 1.10.1 is vulnerable to heap buffer overflow, which could be triggered from DecodeManager::decodeRect. Vulnerability occurs due to the signdness error in processing MemOutStream. Exploitation of this vulnerability could potentially result into remote code execution. This attack appear to be exploitable via network connectivity.

Two stack-based buffer overflow vulnerabilities exist in the boa formIpQoS functionality of Realtek rtl819x Jungle SDK v3.4.11. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can send a series of HTTP requests to trigger these vulnerabilities.This stack-based buffer overflow is related to the `comment` request's parameter.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `ssid` parameter at offset `0x42247c` of the `httpd` binary shipped with v5.0.4 Build 20220216 of the EAP115.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `ssid` parameter at offset `0x0045ab7c` of the `httpd_portal` binary shipped with v5.1.0 Build 20220926 of the EAP225.

A stack-based buffer overflow vulnerability exists in the boa formWsc functionality of Realtek rtl819x Jungle SDK v3.4.11. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can send a series of HTTP requests to trigger this vulnerability.

A vulnerability was found in D-Link DI-8100 16.07.26A1. It has been classified as critical. Affected is an unknown function of the file /jingx.asp of the component HTTP Request Handler. The manipulation leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `profile` parameter at offset `0x0045abc8` of the `httpd_portal` binary shipped with v5.1.0 Build 20220926 of the EAP225.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `band` parameter at offset `0x422420` of the `httpd` binary shipped with v5.0.4 Build 20220216 of the EAP115.

Two stack-based buffer overflow vulnerabilities exist in the boa formIpQoS functionality of Realtek rtl819x Jungle SDK v3.4.11. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can send a series of HTTP requests to trigger these vulnerabilities.This stack-based buffer overflow is related to the `entry_name` request's parameter.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `action` parameter at offset `0x0045ab38` of the `httpd_portal` binary shipped with v5.1.0 Build 20220926 of the EAP225.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `profile` parameter at offset `0x4224b0` of the `httpd` binary shipped with v5.0.4 Build 20220216 of the EAP115.

A stack-based buffer overflow vulnerability exists in the message parsing functionality of the Roku Indoor Camera SE version 3.0.2.4679 and Wyze Cam v3 version 4.36.11.5859. A specially crafted message can lead to stack-based buffer overflow. An attacker can make authenticated requests to trigger this vulnerability.

A stack-based buffer overflow vulnerability exists in the boa formFilter functionality of Realtek rtl819x Jungle SDK v3.4.11. A specially crafted series of HTTP requests can lead to arbitrary code execution. An attacker can send a sequence of requests to trigger this vulnerability.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `action` parameter at offset `0x422448` of the `httpd` binary shipped with v5.0.4 Build 20220216 of the EAP115.

A stack-based buffer overflow vulnerability exists in the boa rollback_control_code functionality of Realtek rtl819x Jungle SDK v3.4.11. A specially crafted series of network requests can lead to arbitrary code execution. An attacker can send a sequence of requests to trigger this vulnerability.

ASUS RT-AC86U’s specific cgi function has a stack-based buffer overflow vulnerability due to insufficient validation for network packet header length. A remote attacker with administrator privileges can exploit this vulnerability to execute arbitrary system commands, disrupt system or terminate service.

A vulnerability was found in D-Link DI-8100 16.07.26A1 and classified as critical. This issue affects some unknown processing of the file /arp_sys.asp of the component HTTP Request Handler. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QTS, QuTScloud, QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QTS, QuTScloud, QuTS hero: QTS 4.5.4.1715 build 20210630 and later QTS 5.0.0.1716 build 20210701 and later QuTScloud c4.5.6.1755 and later QuTS hero h4.5.4.1771 build 20210825 and later

Two stack-based buffer overflow vulnerabilities exist in the boa set_RadvdInterfaceParam functionality of Realtek rtl819x Jungle SDK v3.4.11. A specially crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This stack-based buffer overflow is related to the `AdvDefaultPreference` request's parameter.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects DGN2200Bv4 before 1.0.0.102, DGN2200v4 before 1.0.0.102, EX3700 before 1.0.0.70, EX3800 before 1.0.0.70, EX6000 before 1.0.0.30, EX6100 before 1.0.2.22, EX6120 before 1.0.0.40, EX6130 before 1.0.0.22, EX6150 before 1.0.0.38, EX6200 before 1.0.3.86, EX7000 before 1.0.0.64, R6300v2 before 1.0.4.22, R6900P before 1.3.0.18, R7000P before 1.3.0.18, R7300DST before 1.0.0.62, R7900P before 1.3.0.10, R8000 before 1.0.4.12, R8000P before 1.3.0.10, WN2500RPv2 before 1.0.1.52, and WNDR3400v3 before 1.0.1.18.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D7800 before 1.0.1.28, EX2700 before 1.0.1.32, EX6200v2 before 1.0.1.56, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.3.6, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.52, WN3100RPv2 before 1.0.0.42, WNDR3700v4 before 1.0.2.92, WNDR4300 before 1.0.2.94, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6700 before 1.0.1.48, R7500 before 1.0.0.124, R7800 before 1.0.2.58, R8900 before 1.0.4.2, R9000 before 1.0.4.2, WNDR3700v4 before 1.0.2.102, WNDR4300v1 before 1.0.2.104, WNDR4300v2 before 1.0.0.56, WNDR4500v3 before 1.0.0.56, and WNR2000v5-R2000 before 1.0.0.68.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D6100 before 1.0.0.57, R6100 before 1.0.1.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.92, WNDR4300 before 1.0.2.94, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper validation of requests that are sent to the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary code with root privileges on an affected device. To exploit this vulnerability, the attacker must have valid Administrator credentials on the affected device.

A stack-based buffer overflow [CWE-121] vulnerability in Fortinet FortiOS version 7.2.1 through 7.2.6 and version 7.4.0 through 7.4.1 allows a privileged attacker over the administrative interface to execute arbitrary code or commands via crafted HTTP or HTTPs requests.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

The interactive service in OpenVPN 2.6.9 and earlier allows an attacker to send data causing a stack overflow which can be used to execute arbitrary code with more privileges.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

D-Link DIR-882 DIR882A1_FW130B06, DIR-878 DIR_878_FW1.30B08 was discovered to contain a stack overflow via the AccountPassword parameter in the SetSysEmailSettings module.

D-Link DIR-882 DIR882A1_FW130B06, DIR-878 DIR_878_FW1.30B08 was discovered to contain a stack overflow via the PSK parameter in the SetQuickVPNSettings module.

D-Link DIR-882 DIR882A1_FW130B06, DIR-878 DIR_878_FW1.30B08 was discovered to contain a stack overflow via the Password parameter in the SetQuickVPNSettings module.

D-Link DIR-882 DIR882A1_FW130B06, DIR-878 DIR_878_FW1.30B08 was discovered to contain a stack overflow via the Password parameter in the SetWanSettings module.

D-Link DIR-882 DIR882A1_FW130B06, DIR-878 DIR_878_FW1.30B08 was discovered to contain a stack overflow via the Key parameter in the SetWLanRadioSecurity module.

D-Link DIR-882 DIR882A1_FW130B06, DIR-878 DIR_878_FW1.30B08 was discovered to contain a stack overflow via the Password parameter in the SetWan3Settings module.

In EUTRAN_LCS_ConvertLCS_MOLRReq of LPP_CommonUtil.c, there is a possible out of bounds write due to a logic error in the code. This could lead to remote code execution with System execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-244556535References: N/A

D-Link DIR-882 DIR882A1_FW130B06, DIR-878 DIR_878_FW1.30B08 was discovered to contain a stack overflow via the Password parameter in the SetWan2Settings module.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco RV110W, RV130, RV130W, and RV215W Series Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands. For more information about these vulnerabilities, see the Details section of this advisory.

A buffer overflow vulnerability exists in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. A stack-based buffer overflow in the Start_EPI function within the httpd binary allows an authenticated attacker with administrator privileges to execute arbitrary commands on the underlying Linux operating system as root. This vulnerablity can be triggered over the network via a malicious POST request to /apply.cgi.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.