This vulnerability allows remote attackers to execute arbitrary code on affected installations of Sante DICOM Viewer Pro 11.9.2. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of J2K files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated data structure. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-16679.

A Memory Corruption vulnerability may lead to code execution through maliciously crafted DLL files. It was fixed in PDFTron earlier than 9.0.7 version in Autodesk Navisworks 2022, and 2020.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley MicroStation CONNECT 10.16.02.34. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of DGN files. Crafted data in a DGN file can trigger a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-16469.

Acrobat Reader DC versions 22.001.20085 (and earlier), 20.005.3031x (and earlier) and 17.012.30205 (and earlier) are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley MicroStation CONNECT 10.16.02.34. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of IFC files. Crafted data in an IFC file can trigger a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-16379.

In SoftMaker Software GmbH SoftMaker Office TextMaker 2021 (revision 1014), a specially crafted document can cause the document parser to miscalculate a length used to allocate a buffer, later upon usage of this buffer the application will write outside its bounds resulting in a heap-based buffer overflow. An attacker can entice the victim to open a document to trigger this vulnerability.

A vulnerability was found in upstream release cryptsetup-2.2.0 where, there's a bug in LUKS2 format validation code, that is effectively invoked on every device/image presenting itself as LUKS2 container. The bug is in segments validation code in file 'lib/luks2/luks2_json_metadata.c' in function hdr_validate_segments(struct crypt_device *cd, json_object *hdr_jobj) where the code does not check for possible overflow on memory allocation used for intervals array (see statement "intervals = malloc(first_backup * sizeof(*intervals));"). Due to the bug, library can be *tricked* to expect such allocation was successful but for far less memory then originally expected. Later it may read data FROM image crafted by an attacker and actually write such data BEYOND allocated memory.

In SoftMaker Software GmbH SoftMaker Office PlanMaker 2021 (Revision 1014), a specially crafted document can cause the document parser to copy data from a particular record type into a buffer that is smaller than the size used for the copy which will cause a heap-based buffer overflow. An attacker can entice the victim to open a document to trigger this vulnerability.

A memory corruption vulnerability exists when Windows Media Foundation improperly handles objects in memory. An attacker who successfully exploited the vulnerability could install programs; view, change, or delete data; or create new accounts with full user rights. There are multiple ways an attacker could exploit the vulnerability, such as by convincing a user to open a specially crafted document, or by convincing a user to visit a malicious webpage. The security update addresses the vulnerability by correcting how Windows Media Foundation handles objects in memory.

A heap-based buffer overflow in the hxxx_AnnexB_to_xVC function in modules/packetizer/hxxx_nal.c in VideoLAN VLC media player before 3.0.11 for macOS/iOS allows remote attackers to cause a denial of service (application crash) or execute arbitrary code via a crafted H.264 Annex-B video (.avi for example) file.

An issue was discovered in Foxit Studio Photo before 3.6.6.922. It has an out-of-bounds write via a crafted TIFF file.

An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in tvOS 15.5, macOS Monterey 12.4, iOS 15.5 and iPadOS 15.5. An application may be able to execute arbitrary code with kernel privileges.

An out of bounds memory corruption vulnerability exists in the way Pixar OpenUSD 20.05 reconstructs paths from binary USD files. A specially crafted malformed file can trigger an out of bounds memory modification which can result in remote code execution. To trigger this vulnerability, victim needs to access an attacker-provided malformed file.

An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in macOS Sonoma 14.7, macOS Sequoia 15. Processing a maliciously crafted video file may lead to unexpected app termination.

An exploitable integer overflow vulnerability exists in the PlanMaker document parsing functionality of SoftMaker Office 2021’s PlanMaker application. A specially crafted document can cause the document parser perform arithmetic that may overflow which can result in an undersized heap allocation. Later when copying data from the file into this allocation, a heap-based buffer overflow will occur which can corrupt memory. These types of memory corruptions can allow for code execution under the context of the application. An attacker can entice the victim to open a document to trigger this vulnerability.

A memory corruption vulnerability exists in the Excel Document SST Record 0x00fc functionality of SoftMaker Software GmbH SoftMaker Office PlanMaker 2021 (Revision 1014). A specially crafted malformed file can lead to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability.

An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in tvOS 15.5, macOS Monterey 12.4, iOS 15.5 and iPadOS 15.5. An application may be able to execute arbitrary code with kernel privileges.

Omron CX-Position (versions 2.5.3 and prior) is vulnerable to multiple stack-based buffer overflow conditions while parsing a specific project file, which may allow an attacker to locally execute arbitrary code.

An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in Security Update 2022-004 Catalina, macOS Monterey 12.4, macOS Big Sur 11.6.6. An application may be able to gain elevated privileges.

The affected product is vulnerable to a stack-based buffer overflow, which may allow an attacker to execute arbitrary code.

An exploitable signed conversion vulnerability exists in the TextMaker document parsing functionality of SoftMaker Office 2021’s TextMaker application. A specially crafted document can cause the document parser to miscalculate a length used to allocate a buffer, later upon usage of this buffer the application will write outside its bounds resulting in a heap-based memory corruption. An attacker can entice the victim to open a document to trigger this vulnerability.

An exploitable heap-based buffer overflow vulnerability exists in the PlanMaker document parsing functionality of SoftMaker Office 2021’s PlanMaker application. A specially crafted document can cause the document parser to explicitly trust a length from a particular record type and use it to write a 16-bit null relative to a buffer allocated on the stack. Due to a lack of bounds-checking on this value, this can allow an attacker to write to memory outside of the buffer and controllably corrupt memory. This can allow an attacker to earn code execution under the context of the application. An attacker can entice the victim to open a document to trigger this vulnerability.

stb_vorbis is a single file MIT licensed library for processing ogg vorbis files. A crafted file may trigger out of buffer write in `start_decoder` because at maximum `m->submaps` can be 16 but `submap_floor` and `submap_residue` are declared as arrays of 15 elements. This issue may lead to code execution.

Heap-based Buffer Overflow in GitHub repository vim/vim prior to 8.2.

Omron CX-One Versions 4.60 and prior are vulnerable to a stack-based buffer overflow while processing specific project files, which may allow an attacker to execute arbitrary code.

If an attacker tricks a valid user into running Delta Electronics DIAScreen with a file containing malicious code, a stack-based buffer overflow in BACnetParameter can be exploited, allowing the attacker to remotely execute arbitrary code.

A memory corruption issue was addressed with improved state management. This issue is fixed in macOS Monterey 12.4, watchOS 8.6, tvOS 15.5, macOS Big Sur 11.6.6. An application may be able to execute arbitrary code with kernel privileges.

A memory corruption issue due to an improper length check in LabVIEW tdcore.dll may disclose information or result in arbitrary code execution. Successful exploitation requires an attacker to provide a user with a specially crafted VI. This vulnerability affects LabVIEW 2024 Q1 and prior versions.

Multiple out-of-bounds write vulnerabilities exist in the VCD parse_valuechange portdump functionality of GTKWave 3.3.115. A specially crafted .vcd file can lead to arbitrary code execution. A victim would need to open a malicious file to trigger these vulnerabilities.This vulnerability concerns the out-of-bounds write when triggered via the GUI's legacy VCD parsing code.

The issue was addressed with improved memory handling. This issue is fixed in macOS Big Sur 11.7.3, macOS Ventura 13.2, macOS Monterey 12.6.3. An app may be able to execute arbitrary code with kernel privileges.

A heap-based buffer overflow vulnerability exists in the gif2h5 functionality of HDF5 Group libhdf5 1.10.4. A specially-crafted GIF file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability.

stb_vorbis is a single file MIT licensed library for processing ogg vorbis files. A crafted file may trigger out of bounds write in `f->vendor[len] = (char)'\0';`. The root cause is that if the len read in `start_decoder` is `-1` and `len + 1` becomes 0 when passed to `setup_malloc`. The `setup_malloc` behaves differently when `f->alloc.alloc_buffer` is pre-allocated. Instead of returning `NULL` as in `malloc` case it shifts the pre-allocated buffer by zero and returns the currently available memory block. This issue may lead to code execution.

PLCopen XML file parsing in Phoenix Contact PC Worx and PC Worx Express version 1.87 and earlier can lead to a stack-based overflow. Manipulated PC Worx projects could lead to a remote code execution due to insufficient input data validation.

A maliciously crafted PDF file in Autodesk AutoCAD 2022, 2021, 2020, 2019 can be used to dereference for a write beyond the allocated buffer while parsing PDF files. The vulnerability exists because the application fails to handle a crafted PDF file, which causes an unhandled exception.

InDesign Desktop versions ID18.5.2, ID19.3 and earlier are affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

A maliciously crafted DXF file in Autodesk AutoCAD 2022, 2021, 2020, 2019 and Autodesk Navisworks 2022 can be used to write beyond the allocated buffer through Buffer overflow vulnerability. This vulnerability can be exploited to execute arbitrary code.

Heap-based Buffer Overflow in function cmdline_erase_chars in GitHub repository vim/vim prior to 8.2.4899. This vulnerabilities are capable of crashing software, modify memory, and possible remote execution

The affected product is vulnerable to a stack-based buffer overflow while processing project files, which may allow an attacker to execute arbitrary code

Espruino 2v11.251 was discovered to contain a stack buffer overflow via src/jsvar.c in jsvNewFromString.

json-c through 0.14 has an integer overflow and out-of-bounds write via a large JSON file, as demonstrated by printbuf_memappend.

An issue was discovered on Samsung mobile devices with O(8.X), P(9.0), and Q(10.0) software. The Quram image codec library allows attackers to overwrite memory and execute arbitrary code via crafted JPEG data that is mishandled during decoding. The Samsung ID is SVE-2020-16943 (May 2020).

Heap buffer overflow in vim_strncpy find_word in GitHub repository vim/vim prior to 8.2.4919. This vulnerability is capable of crashing software, Bypass Protection Mechanism, Modify Memory, and possible remote execution

A Memory Corruption vulnerability for DWF and DWFX files in Autodesk AutoCAD 2022, 2021, 2020, 2019 and Autodesk Navisworks 2022 may lead to code execution through maliciously crafted DLL files.

After Effects versions 23.6.6, 24.5 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

stb_vorbis is a single file MIT licensed library for processing ogg vorbis files. A crafted file may trigger memory write past an allocated heap buffer in `start_decoder`. The root cause is a potential integer overflow in `sizeof(char*) * (f->comment_list_length)` which may make `setup_malloc` allocate less memory than required. Since there is another integer overflow an attacker may overflow it too to force `setup_malloc` to return 0 and make the exploit more reliable. This issue may lead to code execution.

Audition versions 24.4.1, 23.6.6 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foxit PhantomPDF 9.7.1.29511. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of U3D objects in PDF files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-10464.

<p>A remote code execution vulnerability exists in the way that Microsoft Graphics Components handle objects in memory. An attacker who successfully exploited the vulnerability could execute arbitrary code on a target system.</p> <p>To exploit the vulnerability, a user would have to open a specially crafted file.</p> <p>The security update addresses the vulnerability by correcting how Microsoft Graphics Components handle objects in memory.</p>

Omron CX-Position (versions 2.5.3 and prior) is vulnerable to memory corruption while processing a specific project file, which may allow an attacker to execute arbitrary code.