An issue found in Wondershare Technology Co, Ltd Filmora v.12.0.9 allows a remote attacker to execute arbitrary commands via the filmora_setup_full846.exe.

An issue found in Wondershare Technology Co.,Ltd Creative Centerr v.1.0.8 allows a remote attacker to execute arbitrary commands via the wondershareCC_setup_full10819.exe file.

An issue found in Wondershare Technology Co., Ltd DemoCreator v.6.0.0 allows a remote attacker to execute arbitrary commands via the democreator_setup_full7743.exe file.

An issue found in Wondershare Technology Co.,Ltd MobileTrans v.4.0.2 allows a remote attacker to execute arbitrary commands via the mobiletrans_setup_full5793.exe file.

An issue found in Wondershare Technology Co, Ltd Edrawmind v.10.0.6 allows a remote attacker to executea arbitrary commands via the WindowsCodescs.dll file.

An issue found in Wondershare Technology Co.,Ltd Dr.Fone v.12.4.9 allows a remote attacker to execute arbitrary commands via the drfone_setup_full3360.exe file.

An issue found in Wondershare Technology Co.,Ltd PDF Reader v.1.0.1 allows a remote attacker to execute arbitrary commands via the pdfreader_setup_full13143.exe file.

An issue found in Wondershare Technology Co., Ltd UniConverter v.14.0.0 allows a remote attacker to execute arbitrary commands via the uniconverter14_64bit_setup_full14204.exe file.

An issue found in Wondershare Technology Co.,Ltd Recoverit v.10.6.3 allows a remote attacker to execute arbitrary commands via the recoverit_setup_full4134.exe file.

An issue found in Wondershare Technology Co.,Ltd Repairit v.3.5.4 allows a remote attacker to execute arbitrary commands via the repairit_setup_full5913.exe file.

An issue found in Wondershare Technology Co.,Ltd Anireel 1.5.4 allows a remote attacker to execute arbitrary commands via the anireel_setup_full9589.exe file.

An issue found in Wondershare Technology Co.,Ltd PDFelement v9.1.1 allows a remote attacker to execute arbitrary commands via the pdfelement-pro_setup_full5239.exe file.

A vulnerability, which was classified as critical, has been found in Wondershare Filmora 14.5.16. Affected by this issue is some unknown functionality in the library CRYPTBASE.dll of the file NFWCHK.exe of the component Installer. The manipulation leads to uncontrolled search path. Attacking locally is a requirement. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

OpenClaw before 2026.5.27 contains an arbitrary code execution vulnerability in skill install flows where workspace .env files can override the Homebrew executable selection. Attackers with access to trusted operator workspaces can execute unintended Homebrew-compatible executables during skill setup to compromise the system.

Untrusted LD_LIBRARY_PATH environment variable vulnerability in the GNU C Library version 2.27 to 2.38 allows attacker controlled loading of dynamically shared library in statically compiled setuid binaries that call dlopen (including internal dlopen calls after setlocale or calls to NSS functions such as getaddrinfo).

Multiple untrusted search path vulnerabilities in Putty beta 0.67 allow local users to execute arbitrary code and conduct DLL hijacking attacks via a Trojan horse (1) UxTheme.dll or (2) ntmarta.dll file in the current working directory.

The issue was addressed with improved checks. This issue is fixed in macOS Monterey 12.6.8, macOS Ventura 13.5, macOS Big Sur 11.7.9. Processing a file may lead to unexpected app termination or arbitrary code execution.

A vulnerability, which was classified as critical, has been found in Discord 1.0.9188 on Windows. Affected by this issue is some unknown functionality in the library WINSTA.dll. The manipulation leads to uncontrolled search path. The attack needs to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An untrusted search path vulnerability was found in Yarn. When a victim runs certain Yarn commands in a directory with attacker-controlled content, malicious commands could be executed in unexpected ways.

A code-execution vulnerability exists during startup in jhi.dll and otpiha.dll in Symantec VIP Access Desktop before 2.2.2, which could let local malicious users execute arbitrary code.

SumatraPDF is a multi-format reader for Windows. In 3.5.2 and earlier, the PDF reader allows execution of a malicious binary (explorer.exe) located in the same directory as the opened PDF when the user clicks File → “Show in folder”. This behavior leads to arbitrary code execution on the victim’s system with the privileges of the current user, without any warning or user interaction beyond the menu click.

Sockeye is an open-source sequence-to-sequence framework for Neural Machine Translation built on PyTorch. Sockeye uses YAML to store model and data configurations on disk. Versions below 2.3.24 use unsafe YAML loading, which can be made to execute arbitrary code embedded in config files. An attacker can add malicious code to the config file of a trained model and attempt to convince users to download and run it. If users run the model, the embedded code will run locally. The issue is fixed in version 2.3.24.

Untrusted search path vulnerability in the HGFS (aka Shared Folders) feature in VMware Tools 10.0.5 in VMware ESXi 5.0 through 6.0, VMware Workstation Pro 12.1.x before 12.1.1, VMware Workstation Player 12.1.x before 12.1.1, and VMware Fusion 8.1.x before 8.1.1 allows local users to gain privileges via a Trojan horse DLL in the current working directory.

Obsidian Dataview through 0.4.12-hotfix1 allows eval injection. The evalInContext function in executes user input, which allows an attacker to craft malicious Markdown files that will execute arbitrary code once opened. NOTE: 0.4.13 provides a mitigation for some use cases.

Microsoft Excel Remote Code Execution Vulnerability

This issue was addressed by forcing hardened runtime on the affected binaries at the system level. This issue is fixed in macOS Monterey 12.6.6, macOS Big Sur 11.7.7, macOS Ventura 13.4. An app may be able to inject code into sensitive binaries bundled with Xcode.

systeminformation is a System and OS information library for node.js. In affected versions SSIDs are not sanitized when before they are passed as a parameter to cmd.exe in the `getWindowsIEEE8021x` function. This means that malicious content in the SSID can be executed as OS commands. This vulnerability may enable an attacker, depending on how the package is used, to perform remote code execution or local privilege escalation. This issue has been addressed in version 5.23.7 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

@asyncapi/java-spring-cloud-stream-template generates a Spring Cloud Stream (SCSt) microservice. In versions prior to 0.7.0 arbitrary code injection was possible when an attacker controls the AsyncAPI document. An example is provided in GHSA-xj6r-2jpm-qvxp. There are no mitigations available and all users are advised to update.

In Edge Client version 7.2.x before 7.2.1.1, 7.1.9.x before 7.1.9.8, and 7.1.x-7.1.8.x before 7.1.8.5, an untrusted search path vulnerability in the BIG-IP APM Client Troubleshooting Utility (CTU) for Windows could allow an attacker to load a malicious DLL library from its current directory. User interaction is required to exploit this vulnerability in that the victim must run this utility on the Windows system. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

Prisma VS Code a VSCode extension for Prisma schema files. This is a Remote Code Execution Vulnerability that affects all versions of the Prisma VS Code extension older than 2.20.0. If a custom binary path for the Prisma format binary is set in VS Code Settings, for example by downloading a project that has a .vscode/settings.json file that sets a value for "prismaFmtBinPath". That custom binary is executed when auto-formatting is triggered by VS Code or when validation checks are triggered after each keypress on a *.prisma file. Fixed in versions 2.20.0 and 20.0.27. As a workaround users can either edit or delete the `.vscode/settings.json` file or check if the binary is malicious and delete it.

DLL Search Order Hijacking vulnerability in Microsoft Windows Client in McAfee True Key (TK) before 5.1.165 allows local users to execute arbitrary code via specially crafted malware.

DLL Side-Loading vulnerability in Microsoft Windows Client in McAfee True Key before 4.20.110 allows local users to gain privilege elevation via not verifying a particular DLL file signature.

An issue was discovered in Foxit PhantomPDF before 8.3.6. It has an untrusted search path that allows a DLL to execute remote code.

A logic issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.2, macOS Sonoma 14.7.2, macOS Ventura 13.7.2. An app may be able to execute arbitrary code out of its sandbox or with certain elevated privileges.

Inclusion of functionality from untrusted control sphere in Visual Studio Code allows an unauthorized attacker to elevate privileges locally.

Opera before 57.0.3098.106 is vulnerable to a DLL Search Order hijacking attack where an attacker can send a ZIP archive composed of an HTML page along with a malicious DLL to the target. Once the document is opened, it may allow the attacker to take full control of the system from any location within the system. The issue lies in the loading of the shcore.dll and dcomp.dll files: these files are being searched for by the program in the same system-wide directory where the HTML file is executed.

A DLL hijacking vulnerability in Trend Micro Security 2019 (Consumer) versions below 15.0.0.1163 and below could allow an attacker to manipulate a specific DLL and escalate privileges on vulnerable installations.

claude-code-cache-fix is a cache optimization proxy for Claude Code. From 3.5.0 to before 3.5.2, tools/quota-statusline.sh (introduced in v3.5.0) interpolates Claude Code's hook stdin payload directly into a Python triple-quoted string literal. A ''' byte sequence in any user-controlled field of the payload closes the literal early and lets following bytes execute as Python in the user's Claude Code process. This vulnerability is fixed in 3.5.2.

There is a DDE injection vulnerability in the GoldenDB database product. Attackers can inject DDE expressions through the interface, and when users download and open the affected file, the DDE commands can be executed.

Illustrator versions 29.2.1, 28.7.4 and earlier are affected by an Untrusted Search Path vulnerability that might allow attackers to execute their own programs, access unauthorized data files, or modify configuration in unexpected ways. If the application uses a search path to locate critical resources such as programs, then an attacker could modify that search path to point to a malicious program, which the targeted application would then execute. The problem extends to any type of critical resource that the application trusts.

Potplayer prior to 1.5.39659: DLL Loading Arbitrary Code Execution Vulnerability

SupportAssist Client version 3.8 and 3.9 contains an Untrusted search path vulnerability that allows attackers to load an arbitrary .dll file via .dll planting/hijacking, only by a separate administrative action that is not a default part of the SOSInstallerTool.exe installation for executing arbitrary dll's,

emacsclient-mail.desktop in Emacs 28.1 through 28.2 is vulnerable to Emacs Lisp code injections through a crafted mailto: URI with unescaped double-quote characters. It is fixed in 29.0.90.

Untrusted search path vulnerability in STAMP Workbench installer all versions allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.

The issue was addressed with improved memory handling. This issue is fixed in iOS 18.4 and iPadOS 18.4, iPadOS 17.7.6, macOS Sequoia 15.4, macOS Sonoma 14.7.5, macOS Ventura 13.7.5, tvOS 18.4, visionOS 2.4, watchOS 11.4. Processing a maliciously crafted file may lead to arbitrary code execution.

Creative Cloud version 5.9.1 (and earlier) is affected by an Untrusted Search Path vulnerability that might allow attackers to execute their own programs, access unauthorized data files, or modify configuration in unexpected ways. If the application uses a search path to locate critical resources such as programs, then an attacker could modify that search path to point to a malicious program, which the targeted application would then execute. The problem extends to any type of critical resource that the application trusts.

A validation issue was addressed with improved logic. This issue is fixed in iOS 18.3 and iPadOS 18.3, iPadOS 17.7.4, macOS Sequoia 15.3, macOS Sonoma 14.7.3, tvOS 18.3, visionOS 2.3, watchOS 11.3. An app may be able to execute arbitrary code with kernel privileges.

An issue was discovered in Veritas NetBackup before 10.5. This only applies to NetBackup components running on a Windows Operating System. If a user executes specific NetBackup commands or an attacker uses social engineering techniques to impel the user to execute the commands, a malicious DLL could be loaded, resulting in execution of the attacker's code in the user's security context.

In elisp-mode.el in GNU Emacs before 30.1, a user who chooses to invoke elisp-completion-at-point (for code completion) on untrusted Emacs Lisp source code can trigger unsafe Lisp macro expansion that allows attackers to execute arbitrary code. (This unsafe expansion also occurs if a user chooses to enable on-the-fly diagnosis that byte compiles untrusted Emacs Lisp source code.)

Git for Windows is the Windows port of the revision control system Git. Prior to Git for Windows version 2.39.2, when `gitk` is run on Windows, it potentially runs executables from the current directory inadvertently, which can be exploited with some social engineering to trick users into running untrusted code. A patch is available in version 2.39.2. As a workaround, avoid using `gitk` (or Git GUI's "Visualize History" functionality) in clones of untrusted repositories.