TYPO3 is an open source PHP based web content management system released under the GNU GPL. It has been discovered that observing response time during user authentication (backend and frontend) can be used to distinguish between existing and non-existing user accounts. Extension authors of 3rd party TYPO3 extensions providing a custom authentication service should check if the extension is affected by the described problem. Affected extensions must implement new `MimicServiceInterface::mimicAuthUser`, which simulates corresponding times regular processing would usually take. Update to TYPO3 version 7.6.58 ELTS, 8.7.48 ELTS, 9.5.37 ELTS, 10.4.32 or 11.5.16 that fix this problem. There are no known workarounds for this issue.

Accounts enumeration vulnerability in the Login Component of Reolink Duo 2 WiFi Camera (Firmware Version v3.0.0.1889_23031701) allows remote attackers to determine valid user accounts via login attempts. This can lead to the enumeration of user accounts and potentially facilitate other attacks, such as brute-forcing of passwords. The vulnerability arises from the application responding differently to login attempts with valid and invalid usernames.

In Legion of the Bouncy Castle BC before 1.61 and BC-FJA before 1.0.1.2, attackers can obtain sensitive information about a private exponent because of Observable Differences in Behavior to Error Inputs. This occurs in org.bouncycastle.crypto.encodings.OAEPEncoding. Sending invalid ciphertext that decrypts to a short payload in the OAEP Decoder could result in the throwing of an early exception, potentially leaking some information about the private exponent of the RSA private key performing the encryption.

IBM TXSeries for Multiplatforms 10.1 could allow an attacker to determine valid usernames due to an observable timing discrepancy which could be used in further attacks against the system.

A vulnerability in Cisco Integrated Management Controller could allow an unauthenticated, remote attacker to enumerate valid usernames within the vulnerable application. The vulnerability is due to differences in authentication responses sent back from the application as part of an authentication attempt. An attacker could exploit this vulnerability by sending authentication requests to the affected application. A successful exploit could allow the attacker to confirm the names of administrative user accounts for use in further attacks.There are no workarounds that address this vulnerability.

Pritunl 1.29.2145.25 allows attackers to enumerate valid VPN usernames via a series of /auth/session login attempts. Initially, the server will return error 401. However, if the username is valid, then after 20 login attempts, the server will start responding with error 400. Invalid usernames will receive error 401 indefinitely. Note: This has been disputed by the vendor as not a vulnerability. They argue that this is an intended design

Umanni RH 1.0 has a user enumeration vulnerability. This issue occurs during password recovery, where a difference in messages could allow an attacker to determine if the user is valid or not, enabling a brute force attack with valid users.

web-auth/webauthn-lib is an open source set of PHP libraries and a Symfony bundle to allow developers to integrate that authentication mechanism into their web applications. The ProfileBasedRequestOptionsBuilder method returns allowedCredentials without any credentials if no username was found. When WebAuthn is used as the first or only authentication method, an attacker can enumerate usernames based on the absence of the `allowedCredentials` property in the assertion options response. This allows enumeration of valid or invalid usernames. By knowing which usernames are valid, attackers can focus their efforts on a smaller set of potential targets, increasing the efficiency and likelihood of successful attacks. This issue has been addressed in version 4.9.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

Matrix Tafnit v8 - CWE-204: Observable Response Discrepancy

An observable response discrepancy vulnerability [CWE-204] in FortiClientEMS 7.4.0, 7.2.0 through 7.2.4, 7.0 all versions, and FortiSOAR 7.5.0, 7.4.0 through 7.4.4, 7.3.0 through 7.3.2, 7.2 all versions, 7.0 all versions, 6.4 all versions may allow an unauthenticated attacker to enumerate valid users via observing login request responses.

_account_forgot_password.ajax.php in MFScripts YetiShare 3.5.2 through 4.5.3 takes a different amount of time to return depending on whether an email address is configured for the account name provided. This can be used by an attacker to enumerate accounts by guessing email addresses.

An issue was discovered in Symfony 4.2.0 to 4.2.11 and 4.3.0 to 4.3.7. The ability to enumerate users was possible due to different handling depending on whether the user existed when making unauthorized attempts to use the switch users functionality. This is related to symfony/security.

On Coldcard MK1 and MK2 devices, a side channel for the row-based OLED display was found. The power consumption of each row-based display cycle depends on the number of illuminated pixels, allowing a partial recovery of display contents. For example, a hardware implant in the USB cable might be able to leverage this behavior to recover confidential secrets such as the PIN and BIP39 mnemonic. In other words, the side channel is relevant only if the attacker has enough control over the device's USB connection to make power-consumption measurements at a time when secret data is displayed. The side channel is not relevant in other circumstances, such as a stolen device that is not currently displaying secret data. On Coldcard MK1 and MK2 devices, a side channel for the row-based OLED display was found. The power consumption of each row-based display cycle depends on the number of illuminated pixels, allowing a partial recovery of display contents. For example, a hardware implant in the USB cable might be able to leverage this behavior to recover confidential secrets such as the PIN and BIP39 mnemonic. In other words, the side channel is relevant only if the attacker has enough control over the device's USB connection to make power-consumption measurements at a time when secret data is displayed. The side channel is not relevant in other circumstances, such as a stolen device that is not currently displaying secret data. NOTE: At Coinkite, we’ve already mitigated it, even though we feel strongly that it is not a legitimate issue. In our opinion, it is both unproven (might not even work) and also completely impractical—even if it could be made to work perfectly

In CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.848, the Login process allows attackers to check whether a username is valid by comparing response times.

An issue was discovered in MediaWiki before 1.35.8, 1.36.x and 1.37.x before 1.37.5, and 1.38.x before 1.38.3. HTMLUserTextField exposes the existence of hidden users.

Dropbear 2011.54 through 2018.76 has an inconsistent failure delay that may lead to revealing valid usernames, a different issue than CVE-2018-15599.

webcalendar before 1.2.7 shows the reason for a failed login (e.g., "no such user").

The authentication method in Laravel 8.x through 9.x before 9.32.0 was discovered to be vulnerable to user enumeration via timeless timing attacks with HTTP/2 multiplexing. This is caused by the early return inside the hasValidCredentials method in the Illuminate\Auth\SessionGuard class when a user is found to not exist.

Crypto++ (aka Cryptopp) 8.6.0 and earlier contains a timing leakage in MakePublicKey(). There is a clear correlation between execution time and private key length, which may cause disclosure of the length information of the private key. This might allow attackers to conduct timing attacks. NOTE: this report is disputed by the vendor and multiple third parties. The execution-time differences are intentional. A user may make a choice of a longer key as a tradeoff between strength and performance. In making this choice, the amount of information leaked to an adversary is of infinitesimal value

A vulnerability was found in nasirkhan Laravel Starter up to 11.8.0. It has been rated as problematic. Affected by this issue is some unknown functionality of the file /forgot-password of the component Password Reset Handler. The manipulation of the argument Email leads to observable response discrepancy. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-268784. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

GNU GRUB (aka GRUB2) through 2.12 does not use a constant-time algorithm for grub_crypto_memcmp and thus allows side-channel attacks.

IBM TXSeries for Multiplatforms 9.1 and 11.1 could allow an attacker to enumerate usernames due to an observable login attempt response discrepancy.

Dependency-Track is a Component Analysis platform that allows organizations to identify and reduce risk in the software supply chain. Performing a login request against the /api/v1/user/login endpoint with a username that exist in the system takes significantly longer than performing the same action with a username that is not known by the system. The observable difference in request duration can be leveraged by actors to enumerate valid names of managed users. LDAP and OpenID Connect users are not affected. The issue has been fixed in Dependency-Track 4.12.2.

Combodo iTop is a simple, web based IT Service Management tool. Unauthenticated user can perform users enumeration, which can make it easier to bruteforce a valid account. As a fix the sentence displayed after resetting password no longer shows if the user exists or not. This fix is included in versions 2.7.11, 3.0.5, 3.1.2, and 3.2.0. Users are advised to upgrade. Users unable to upgrade may overload the dictionary entry `"UI:ResetPwd-Error-WrongLogin"` through an extension and replace it with a generic message.

A vulnerability has been identified in Polarion V2310 (All versions), Polarion V2404 (All versions < V2404.2). The login implementation of the affected application contains an observable response discrepancy vulnerability when validating usernames. This could allow an unauthenticated remote attacker to distinguish between valid and invalid usernames.

CyberArk Identity 21.5.131, when handling an invalid authentication attempt, sometimes reveals whether the username is valid. In certain authentication policy configurations with MFA, the API response length can be used to differentiate between a valid user and an invalid one (aka Username Enumeration). Response differentiation enables attackers to enumerate usernames of valid application users. Attackers can use this information to leverage brute-force and dictionary attacks in order to discover valid account information such as passwords.

A Observable Response Discrepancy vulnerability in spacewalk-java of SUSE Manager Server 4.1, SUSE Manager Server 4.2 allows remote attackers to discover valid usernames. This issue affects: SUSE Manager Server 4.1 spacewalk-java versions prior to 4.1.46-1. SUSE Manager Server 4.2 spacewalk-java versions prior to 4.2.37-1.

In Talend Administration Center 7.3.1.20200219 before TAC-15950, the Forgot Password feature provides different error messages for invalid reset attempts depending on whether the email address is associated with any account. This allows remote attackers to enumerate accounts via a series of requests.

ZimaOS is a fork of CasaOS, an operating system for Zima devices and x86-64 systems with UEFI. In version 1.2.4 and all prior versions, the API endpoint `http://<Server-IP>/v1/users/login` in ZimaOS returns distinct responses based on whether a username exists or the password is incorrect. This behavior can be exploited for username enumeration, allowing attackers to determine whether a user exists in the system or not. Attackers can leverage this information in further attacks, such as credential stuffing or targeted password brute-forcing. As of time of publication, no known patched versions are available.

Observable behavioral discrepancy vulnerability in QSAN Storage Manager allows remote attackers to obtain the system information without permissions. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

SummaryThis advisory addresses a security vulnerability in Mautic related to the "Forget your password" functionality. This vulnerability could be exploited by unauthenticated users to enumerate valid usernames. User Enumeration via Timing Attack: A user enumeration vulnerability exists in the "Forget your password" functionality. Differences in response times for existing and non-existing users, combined with a lack of request limiting, allow an attacker to determine the existence of usernames through a timing-based attack. MitigationPlease update to a version that addresses this timing vulnerability, where password reset responses are normalized to respond at the same time regardless of user existence.

An issue was discovered in Django v5.1.1, v5.0.9, and v4.2.16. The django.contrib.auth.forms.PasswordResetForm class, when used in a view implementing password reset flows, allows remote attackers to enumerate user e-mail addresses by sending password reset requests and observing the outcome (only when e-mail sending is consistently failing).

Fides is an open-source privacy engineering platform. Prior to version 2.44.0, a timing-based username enumeration vulnerability exists in Fides Webserver authentication. This vulnerability allows an unauthenticated attacker to determine the existence of valid usernames by analyzing the time it takes for the server to respond to login requests. The discrepancy in response times between valid and invalid usernames can be leveraged to enumerate users on the system. This vulnerability enables a timing-based username enumeration attack. An attacker can systematically guess and verify which usernames are valid by measuring the server's response time to authentication requests. This information can be used to conduct further attacks on authentication such as password brute-forcing and credential stuffing. The vulnerability has been patched in Fides version `2.44.0`. Users are advised to upgrade to this version or later to secure their systems against this threat. There are no workarounds.

Loway - CWE-204: Observable Response Discrepancy

An exposure of sensitive information vulnerability exists in TCExam <= 14.8.1. If a password reset request was made for an email address that was not registered with a user then we would be presented with an ‘unknown email’ error. If an email is given that is registered with a user then this error will not appear. A malicious actor could abuse this to enumerate the email addresses of

ManageEngine ADSelfService Plus below build 6116 contains an observable response discrepancy in the UMCP operation of the ChangePasswordAPI. This allows an unauthenticated remote attacker to determine whether a Windows domain user exists.

An issue was discovered in One Identity Password Manager 5.8. An attacker could enumerate valid answers for a user. It is possible for an attacker to detect a valid answer based on the HTTP response content, and reuse this answer later for a password reset on a chosen password. The enumeration is possible because, within the HTTP response content, WRONG ID is only returned when the answer is incorrect.

SonicOS SSLVPN login page allows a remote unauthenticated attacker to perform firewall management administrator username enumeration based on the server responses. This vulnerability affected SonicOS Gen 5 version 5.9.1.7, 5.9.1.13, Gen 6 version 6.5.4.7, 6.5.1.12, 6.0.5.3, SonicOSv 6.5.4.v and Gen 7 version SonicOS 7.0.0.0.

The PlexTrac platform prior to version 1.28.0 allows for username enumeration via HTTP response times on invalid login attempts for users configured to use the PlexTrac authentication provider. Login attempts for valid, unlocked users configured to use PlexTrac as their authentication provider take significantly longer than those for invalid users, allowing for valid users to be enumerated by an unauthenticated remote attacker. Note that the lockout policy implemented in Plextrac version 1.17.0 makes it impossible to distinguish between valid, locked user accounts and user accounts that do not exist, but does not prevent valid, unlocked users from being enumerated.