A command injection vulnerability in Brocade Fabric OS before 9.2.0c, and 9.2.1 through 9.2.1a on IP extension platforms could allow a local authenticated attacker to perform a privileged escalation via crafted use of the portcfg command. This specific exploitation is only possible on IP Extension platforms: Brocade 7810, Brocade 7840, Brocade 7850 and on Brocade X6 or X7 directors with an SX-6 Extension blade installed. The attacker must be logged into the switch via SSH or serial console to conduct the attack.

A vulnerability in Brocade Fabric OS could allow an authenticated, local attacker with privileges to access the Bash shell to access insecurely stored file contents including the history command.

Through manipulation of passwords or other variables, using commands such as portcfgupload, configupload, license, myid, a non-privileged user could obtain root privileges in Brocade Fabric OS versions before Brocade Fabric OS v9.1.1c and v9.2.0.

Brocade Fabric OS versions before Brocade Fabric OS v9.1.1c, and v9.2.0 Could allow an authenticated, local user with knowledge of full path names inside Brocade Fabric OS to execute any command regardless of assigned privilege. Starting with Fabric OS v9.1.0, “root” account access is disabled.

An issue was discovered in Broadcom) LSI PCI-SV92EX Soft Modem Kernel Driver through 2.2.100.1 (aka AGRSM64.sys). There is Local Privilege Escalation to SYSTEM via a Stack Overflow in RTLCopyMemory (IOCTL 0x1b2150). An attacker can exploit this to elevate privileges from a medium-integrity process to SYSTEM. This can also be used to bypass kernel-level protections such as AV or PPL, because exploit code runs with high-integrity privileges and can be used in coordinated BYOVD (bring your own vulnerable driver) ransomware campaigns.

Advanced Secure Gateway and Content Analysis, prior to 7.3.13.1 / 3.1.6.0, may be susceptible to an Elevation of Privilege vulnerability.

A locking issue was discovered in the tty subsystem of the Linux kernel through 5.9.13. drivers/tty/tty_jobctrl.c allows a use-after-free attack against TIOCSPGRP, aka CID-54ffccbf053b.

CA Unified Infrastructure Management 20.1 and earlier contains a vulnerability in the robot (controller) component that allows local attackers to elevate privileges.

An insecure file access vulnerability exists in CA Client Automation 14.0, 14.1, 14.2, and 14.3 Agent for Windows that can allow a local attacker to gain escalated privileges.

Brocade SANnav versions before v2.0 use a hard-coded password, which could allow local authenticated attackers to access a back-end database and gain privileges.

A vulnerability in Brocade Fabric OS before 9.2.1c3 could allow elevating the privileges of the local authenticated user to “root” using the export option of seccertmgmt and seccryptocfg commands.

A Vulnerability in the configdownload command of Brocade Fabric OS command line interface (CLI) versions before 8.2.1, 8.1.2f, 8.0.2f, 7.4.2d could allow a local attacker to escape the restricted shell and, gain root access.

An issue was discovered in these Pivotal RabbitMQ versions: all 3.4.x versions, all 3.5.x versions, and 3.6.x versions prior to 3.6.9; and these RabbitMQ for PCF versions: all 1.5.x versions, 1.6.x versions prior to 1.6.18, and 1.7.x versions prior to 1.7.15. RabbitMQ management UI stores signed-in user credentials in a browser's local storage without expiration, making it possible to retrieve them using a chained attack.

CA Automic Dollar Universe 5.3.3 contains a vulnerability, related to the uxdqmsrv binary being setuid root, that allows local attackers to elevate privileges. This vulnerability was reported to CA several years after CA Automic Dollar Universe 5.3.3 reached End of Life (EOL) status on April 1, 2015.

The casrvc program in CA Common Services, as used in CA Client Automation 12.8, 12.9, and 14.0; CA SystemEDGE 5.8.2 and 5.9; CA Systems Performance for Infrastructure Managers 12.8 and 12.9; CA Universal Job Management Agent 11.2; CA Virtual Assurance for Infrastructure Managers 12.8 and 12.9; CA Workload Automation AE 11, 11.3, 11.3.5, and 11.3.6 on AIX, HP-UX, Linux, and Solaris allows local users to modify arbitrary files and consequently gain root privileges via vectors related to insufficient validation.

A vulnerability in fab_seg.c.h libraries of all Brocade Fabric OS versions before Brocade Fabric OS v9.1.1, v9.0.1e, v8.2.3c, v8.2.0_cbn5, 7.4.2j could allow local authenticated attackers to exploit stack-based buffer overflows and execute arbitrary code as the root user account.

Several commands in Brocade Fabric OS before Brocade Fabric OS v.9.0.1e, and v9.1.0 use unsafe string functions to process user input. Authenticated local attackers could abuse these vulnerabilities to exploit stack-based buffer overflows, allowing arbitrary code execution as the root user account.

Symantec Endpoint Protection, prior to 14.3 RU6 (14.3.9210.6000), may be susceptible to a Elevation of Privilege vulnerability, which is a type of issue whereby an attacker may attempt to compromise the software application to gain elevated

A vulnerability was found in appneta tcpreplay up to 4.4.4. It has been classified as problematic. This affects the function get_layer4_v6 of the file /tcpreplay/src/common/get.c. The manipulation leads to heap-based buffer overflow. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The identifier VDB-258333 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The PostgreSQL implementation in Brocade SANnav versions before 2.3.0a is vulnerable to an incorrect local authentication flaw. An attacker accessing the VM where the Brocade SANnav is installed can gain access to sensitive data inside the PostgreSQL database.

A privilege escalation vulnerability in Brocade Fabric OS CLI before Brocade Fabric OS v9.1.0, 9.0.1e, 8.2.3c, 8.2.0cbn5, could allow a local authenticated user to escalate its privilege to root using switch commands “supportlink”, “firmwaredownload”, “portcfgupload, license, and “fosexec”.

The request handling functions in web management interface of Brocade Fabric OS versions before v9.0.1a, v8.2.3a, and v7.4.2h do not properly handle malformed user input, resulting in a service crash. An authenticated attacker could use this weakness to cause the FOS HTTP application handler to crash, requiring a reboot.

CA eHealth Performance Manager through 6.3.2.12 is affected by Privilege Escalation via a Dynamically Linked Shared Object Library. A regular user must create a malicious library in the writable RPATH, to be dynamically linked when the emtgtctl2 executable is run. The code in the library will be executed as the ehealth user. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

The command ipfilter in Brocade Fabric OS before Brocade Fabric OS v.9.0.1a, v8.2.3, and v8.2.0_CBN4, and v7.4.2h uses unsafe string function to process user input. Authenticated attackers can abuse this vulnerability to exploit stack-based buffer overflows, allowing execution of arbitrary code as the root user account.

A vulnerability in the authentication mechanism of Brocade Fabric OS versions before Brocade Fabric OS v.9.0.1a, v8.2.3a and v7.4.2h could allow a user to Login with empty password, and invalid password through telnet, ssh and REST.

VMware NSX-T contains a privilege escalation vulnerability due to an issue with RBAC (Role based access control) role assignment. Successful exploitation of this issue may allow attackers with local guest user account to assign privileges higher than their own permission level.

An unprivileged write to the file handler flaw in the Linux kernel's control groups and namespaces subsystem was found in the way users have access to some less privileged process that are controlled by cgroups and have higher privileged parent process. It is actually both for cgroup2 and cgroup1 versions of control groups. A local user could use this flaw to crash the system or escalate their privileges on the system.

RabbitMQ installers on Windows prior to version 3.8.16 do not harden plugin directory permissions, potentially allowing attackers with sufficient local filesystem permissions to add arbitrary plugins.

scp in OpenSSH through 8.3p1 allows command injection in the scp.c toremote function, as demonstrated by backtick characters in the destination argument. NOTE: the vendor reportedly has stated that they intentionally omit validation of "anomalous argument transfers" because that could "stand a great chance of breaking existing workflows."

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Broadcom DX NetOps Spectrum on Windows, Linux allows OS Command Injection.This issue affects DX NetOps Spectrum: 23.3.6 and earlier.

Brocade Fabric OS versions starting with 9.1.0 have root access removed, however, a local user with admin privilege can potentially execute arbitrary code with full root privileges on Fabric OS versions 9.1.0 through 9.1.1d6.

Implementation of the Simple Network Management Protocol (SNMP) operating on the Brocade 6547 (FC5022) embedded switch blade, makes internal script calls to system.sh from within the SNMP binary. An authenticated attacker could perform command or parameter injection on SNMP operations that are only enabled on the Brocade 6547 (FC5022) embedded switch. This injection could allow the authenticated attacker to issue commands as Root.

Remote code execution (RCE) vulnerability in Brocade Fabric OS after v9.0 and before v9.2.0 could allow an attacker to execute arbitrary code and use this to gain root access to the Brocade switch.

In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.4 (Affected 3.0.0,3.0.1,3.0.2,3.0.3). Fixed in OpenSSL 1.1.1p (Affected 1.1.1-1.1.1o). Fixed in OpenSSL 1.0.2zf (Affected 1.0.2-1.0.2ze).

A potential security vulnerability has been identified in the HP Linux Imaging and Printing Software. This potential vulnerability may allow escalation of privileges and/or arbitrary code execution via operating system command injection.

OS Command Injection in GitHub repository mlflow/mlflow prior to 2.6.0.

Shell Injection vulnerability GL.iNet A1300 v4.4.6, AX1800 v4.4.6, AXT1800 v4.4.6, MT3000 v4.4.6, MT2500 v4.4.6, MT6000 v4.5.0, MT1300 v4.3.7, MT300N-V2 v4.3.7, AR750S v4.3.7, AR750 v4.3.7, AR300M v4.3.7, and B1300 v4.3.7., allows local attackers to execute arbitrary code via the get_system_log and get_crash_log functions of the logread module, as well as the upgrade_online function of the upgrade module.

Network Manager VPNC plugin (aka networkmanager-vpnc) before version 1.2.6 is vulnerable to a privilege escalation attack. A new line character can be used to inject a Password helper parameter into the configuration data passed to VPNC, allowing an attacker to execute arbitrary commands as root.

A command injection vulnerability in the license-check daemon of Juniper Networks Junos OS that may allow a locally authenticated attacker with low privileges to execute commands with root privilege. license-check is a daemon used to manage licenses in Junos OS. To update licenses, a user executes the command 'request system license update' via the CLI. An attacker with access to this CLI command may be able to exploit the vulnerability. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S4, 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2.

Privilege escalation via background service of OpenVPN Connect 3.5.1 through 3.8.1 on macOS allows attackers to execute arbitrary commands with elevated privileges via local IPC channel

A command injection vulnerability exists in Windscribe for Linux Desktop App that allows a local user who is a member of the windscribe group to execute arbitrary commands as root via the 'adapterName' parameter of the 'changeMTU' function. Fixed in Windscribe v2.18.3-alpha and v2.18.8.

FastMCP is the standard framework for building MCP applications. Versions prior to 2.13.0, a command-injection vulnerability lets any attacker who can influence the server_name field of an MCP execute arbitrary OS commands on Windows hosts that run fastmcp install cursor. This vulnerability is fixed in 2.13.0.

Dell PowerProtect DD, versions prior to 7.13.0.10, LTS 7.7.5.25, LTS 7.10.1.15, 6.2.1.110 contain an OS command injection vulnerability in the CLI. A local low privileged attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker.

AWStats 8.0 is vulnerable to Command Injection via the open function

Local Agent DVR versions thru 6.6.1.0 are vulnerable to directory traversal that allows an unauthenticated local attacker to gain access to sensitive information, cause a server-side forgery request (SSRF), or execute OS commands.

Dell SmartFabric Storage Software v1.4 (and earlier) contain(s) an OS Command Injection Vulnerability in the CLI. An authenticated local attacker could potentially exploit this vulnerability, leading to possible injection of parameters to curl or docker.

Dell Unity prior to 5.3 contains a Restricted Shell Bypass vulnerability. This could allow an authenticated, local attacker to exploit this vulnerability by authenticating to the device CLI and issuing certain commands.

Dell SmartFabric Storage Software v1.4 (and earlier) contains an OS Command Injection Vulnerability in the CLI use of the ‘more’ command. A local or remote authenticated attacker could potentially exploit this vulnerability, leading to the ability to gain root-level access.

An improper neutralization of special elements used in an OS command vulnerability [CWE-78]  in the command line interpreter of FortiTester 2.3.0 through 7.2.3 may allow an authenticated attacker to execute unauthorized commands via specifically crafted arguments when running execute restore/backup .

A vulnerability in the ConfD CLI and the Cisco Crosswork Network Services Orchestrator CLI could allow an authenticated, low-privileged, local attacker to read and write arbitrary files as root on the underlying operating system. This vulnerability is due to improper authorization enforcement when specific CLI commands are used. An attacker could exploit this vulnerability by executing an affected CLI command with crafted arguments. A successful exploit could allow the attacker to read or write arbitrary files on the underlying operating system with the privileges of the root user.