Brocade SANnav before v2.3.0a lacks protection mechanisms on port 2377/TCP and 7946/TCP, which could allow an unauthenticated attacker to sniff the SANnav Docker information.

curl 7.1.1 to and including 7.75.0 is vulnerable to an "Exposure of Private Personal Information to an Unauthorized Actor" by leaking credentials in the HTTP Referer: header. libcurl does not strip off user credentials from the URL when automatically populating the Referer: HTTP request header field in outgoing HTTP requests, and therefore risks leaking sensitive data to the server that is the target of the second HTTP request.

Brocade SANNav before version 2.1.1 contains an information disclosure vulnerability. Successful exploitation of internal server information in the initial login response header.

An unauthenticated user can access Identity Manager’s management console specific page URLs. However, the system doesn’t allow the user to carry out server side tasks without a valid web session.

Brocade SANnav before SANnav 2.3.1b enables weak TLS ciphers on ports 443 and 18082. In case of a successful exploit, an attacker can read Brocade SANnav data stream that includes monitored Brocade Fabric OS switches performance data, port status, zoning information, WWNs, IP Addresses, but no customer data, no personal data and no secrets or passwords, as it travels across the network.

CA Automic Automation 12.2 and 12.3 contain an insecure input handling vulnerability in the Automic Agent that could allow a remote attacker to potentially enumerate users.

The OVA version of Brocade SANnav before version 2.1.1 installation with IPv6 networking exposes the docker container ports to the network, increasing the potential attack surface.

An issue was discovered in these Pivotal RabbitMQ versions: all 3.4.x versions, all 3.5.x versions, and 3.6.x versions prior to 3.6.9; and these RabbitMQ for PCF versions: all 1.5.x versions, 1.6.x versions prior to 1.6.18, and 1.7.x versions prior to 1.7.15. RabbitMQ management UI stores signed-in user credentials in a browser's local storage without expiration, making it possible to retrieve them using a chained attack.

CA Technologies Identity Governance 12.6, 14.0, 14.1, and 14.2 and CA Identity Suite Virtual Appliance 14.0, 14.1, and 14.2 provide telling error messages that may allow remote attackers to enumerate account names.

The ajaxswing webui in the management server in Symantec Critical System Protection (SCSP) 5.2.9 through MP6 and Symantec Data Center Security: Server Advanced (SDCS:SA) 6.0.x through 6.0 MP1 allows remote authenticated users to obtain sensitive server information via unspecified vectors.

A vulnerability in Brocade SANnav exposes Kafka in the wan interface. The vulnerability could allow an unauthenticated attacker to perform various attacks, including DOS against the Brocade SANnav.

A vulnerability affects Brocade SANnav before v2.3.1 and v2.3.0a. It allows a Brocade SANnav service to send ping commands in the background at regular intervals to gridgain.com to check if updates are available for the Component. This could make an unauthenticated, remote attacker aware of the behavior and launch a supply-chain attack against a Brocade SANnav appliance.

CA (formerly Computer Associates) eTrust ITM (Threat Manager) 8.1 stores sensitive user information in log files with predictable names, which allows remote attackers to obtain this information via unspecified vectors.

RADIUS Protocol under RFC 2865 is susceptible to forgery attacks by a local attacker who can modify any valid Response (Access-Accept, Access-Reject, or Access-Challenge) to any other response using a chosen-prefix collision attack against MD5 Response Authenticator signature.

On Broadcom BCM4355C0 Wi-Fi chips 9.44.78.27.0.1.56, an attacker can trigger an information leak due to insufficient length validation, related to ICMPv6 router advertisement offloading.

An information disclosure vulnerability in Brocade Fabric OS CLI before Brocade Fabric OS v9.1.0, 9.0.1e, 8.2.3c, 8.2.0cbn5, 7.4.2.j could allow a local authenticated attacker to read sensitive files using switch commands “configshow” and “supportlink”.

Lexmark X, W, T, E, and C devices before 2012-02-09 allow attackers to obtain sensitive information by reading passwords within exported settings.

The FromDocToPDF extension before 13.611.13.2303 for Chrome allows remote attackers to discover visited web sites via vectors involving a mostVisitedSites command.

Exposure of Sensitive Information vulnerability in Bixby Vision prior to version 3.7.50.6 allows attackers to access internal data of Bixby Vision via unprotected intent.

A security vulnerability has been detected in YiFang CMS up to 2.0.5. Affected by this vulnerability is the function exportInstallTable of the file app/utils/base/database/Migrate.php. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An improper input validation vulnerability exists in Jenkins versions 2.106 and earlier, and LTS 2.89.3 and earlier, that allows an attacker to access plugin resource files in the META-INF and WEB-INF directories that should not be accessible, if the Jenkins home directory is on a case-insensitive file system.

A vulnerability in SonicOS SNMP service resulting exposure of Wireless Access Point sensitive information in cleartext.

Exposure of sensitive information to an unauthorized actor vulnerability in Web Server in Synology DiskStation Manager (DSM) before 7.0.1-42218-2 allows remote attackers to obtain sensitive information via unspecified vectors.

A vulnerability has been found in zlt2000 microservices-platform up to 6.0.0 and classified as problematic. This vulnerability affects unknown code of the file /actuator of the component Spring Actuator Interface. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in the web framework of Cisco Unified Communications Manager could allow an unauthenticated, remote attacker to view sensitive data. The vulnerability is due to insufficient protection of database tables. An attacker could exploit this vulnerability by browsing to a specific URL. An exploit could allow the attacker to view data library information. Cisco Bug IDs: CSCvf20269.

The GiveWP – Donation Plugin and Fundraising Platform plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 4.6.0. This makes it possible for unauthenticated attackers to extract donor names, emails, and donor id.

A vulnerability in Cisco WebEx Recording Format (WRF) Player could allow an unauthenticated, remote attacker to access sensitive data about the application. An attacker could exploit this vulnerability to gain information to conduct additional reconnaissance attacks. The vulnerability is due to a design flaw in Cisco WRF Player. An attacker could exploit this vulnerability by utilizing a maliciously crafted file that could bypass checks in the code and enable an attacker to read memory from outside the bounds of the mapped file. This vulnerability affects Cisco WebEx Business Suite meeting sites, Cisco WebEx Meetings sites, and Cisco WebEx WRF players. Cisco Bug IDs: CSCvh89107, CSCvh89113, CSCvh89132, CSCvh89142.

A vulnerability in the REST API of Cisco 5500 and 8500 Series Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to view system information that under normal circumstances should be prohibited. The vulnerability is due to incomplete input and validation checking mechanisms in the REST API URL request. An attacker could exploit this vulnerability by sending a malicious URL to the REST API. If successful, an exploit could allow the attacker to view sensitive system information. Cisco Bug IDs: CSCvg89442.

Adobe ColdFusion 9.0.1 CHF1 and earlier, when a web application is configured to use a DBMS, allows remote attackers to obtain potentially sensitive information about the database structure via an id=- query to a .cfm file. NOTE: the vendor disputes the significance of this issue because the Site-wide Error Handler and Debug Output Settings sections of the ColdFusion Lockdown guide explain the requirement for settings that prevent this information disclosure

The WoodMart plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 8.2.5 via the woodmart_get_posts_by_query() function due to insufficient restrictions on which posts can be included. This makes it possible for unauthenticated attackers to extract data from password protected, private, or draft posts that they should not have access to.

Adobe ColdFusion 9.0.1 CHF1 and earlier allows remote attackers to obtain sensitive information via an id=- query to a .cfm file, which reveals the installation path in an error message. NOTE: the vendor disputes the significance of this issue because the Site-wide Error Handler and Debug Output Settings sections of the ColdFusion Lockdown guide explain the requirement for settings that prevent this information disclosure

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices does not set the secure flag for cookies in an https session to an administration application, which makes it easier for remote attackers to capture these cookies by intercepting their transmission within an http session.

A vulnerability was found in Metasoft 美特软件 MetaCRM up to 6.4.2. It has been rated as problematic. Affected by this issue is some unknown functionality of the file /env.jsp. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in LB-LINK BL-AC3600 up to 1.0.22. This affects the function geteasycfg of the file /cgi-bin/lighttpd.cgi of the component Web Management Interface. The manipulation of the argument Password leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in LB-LINK BL-AC1900, BL-AC2100_AZ3, BL-AC3600, BL-AX1800, BL-AX5400P and BL-WR9000 up to 20250702. This vulnerability affects the function bs_GetHostInfo in the library libblinkapi.so of the file /cgi-bin/lighttpd.cgi. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

PhpMyAdmin 5.1.1 and before allows an attacker to retrieve potentially sensitive information by creating invalid requests. This affects the lang parameter, the pma_parameter, and the cookie section.

TYPO3 before 4.2.13, 4.3.x before 4.3.4 and 4.4.x before 4.4.1 allows information disclosure in the mail header of the HTML mailing API.

CMS Made Simple version 1.x Form Builder before version 0.8.1.6 allows remote attackers to conduct information-disclosure attacks via exportxml.

An issue was discovered on Samsung mobile devices with M(6.0) software. There is an information disclosure in a Trustlet because an address is logged. The Samsung ID is SVE-2018-11600 (July 2018).

A vulnerability classified as problematic has been found in Amcrest IP2M-841B, IP2M-841W, IPC-IP2M-841B, IPC-IP3M-943B, IPC-IP3M-943S, IPC-IP3M-HX2B and IPC-IPM-721S up to 20241211. This affects an unknown part of the file /web_caps/webCapsConfig of the component Web Interface. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

NETGEAR R7000 devices before 1.0.11.116 are affected by disclosure of sensitive information.

The Birth Chart Compatibility plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 2.0. This is due to insufficient protection against directly accessing the plugin's index.php file, which causes an error exposing the full path. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website.

Yordam Library Information Document Automation product before version 19.02 has an unauthenticated Information disclosure vulnerability.

Sangoma Technologies Corporation Switchvox Version 102409 is affected by an information disclosure vulnerability due to an improper access restriction. Users information such as first name, last name, acount id, server uuid, email address, profile image, number, timestamps, etc can be extracted by sending an unauthenticated HTTP GET request to the https://Switchvox-IP/main?cmd=invalid_browser.

BuddyBoss Platform through 1.8.0 allows remote attackers to obtain the email address of each user. When creating a new user, it generates a Unique ID for their profile. This UID is their private email address with symbols removed and periods replaced with hyphens. For example. JohnDoe@example.com would become /members/johndoeexample-com and Jo.test@example.com would become /members/jo-testexample-com. The members list is available to everyone and (in a default configuration) often without authentication. It is therefore trivial to collect a list of email addresses.

A vulnerability has been found in sepidz SepidzDigitalMenu up to 7.1.0728.1 and classified as problematic. This vulnerability affects unknown code of the file /Waiters. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-252994 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Directus is a real-time API and App dashboard for managing SQL database content. Starting in version 9.0.0 and prior to version 11.9.0, the exact Directus version number is incorrectly being used as OpenAPI Spec version this means that it is being exposed by the `/server/specs/oas` endpoint without authentication. With the exact version information a malicious attacker can look for known vulnerabilities in Directus core or any of its shipped dependencies in that specific running version. Version 11.9.0 fixes the issue.

Yopify, an e-commerce notification plugin, up to April 06, 2017, leaks the first name, last initial, city, and recent purchase data of customers, all without user authorization.

SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. In versions 7.14.6 and 8.8.0, the broken authentication in the legacy iCal service allows unauthenticated access to meeting data. An unauthenticated actor can view any user's meeting (calendar event) data given their username, related functionality allows user enumeration. This is fixed in versions 7.14.7 and 8.8.1.

Survey Solutions is a survey management and data collection system. In affected versions the Headquarters application publishes /metrics endpoint available to any user. None of the survey answers are ever exposed, only the aggregate counters, including count of interviews, or count of assignments. Starting from version 21.09.1 the endpoint is turned off by default.