In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: check dpu_plane_atomic_print_state() for valid sspp Similar to the r_pipe sspp protect, add a check to protect the pipe state prints to avoid NULL ptr dereference for cases when the state is dumped without a corresponding atomic_check() where the pipe->sspp is assigned. Patchwork: https://patchwork.freedesktop.org/patch/628404/

In the Linux kernel, the following vulnerability has been resolved: Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()" This reverts commit 7c877586da3178974a8a94577b6045a48377ff25. Anders and Philippe have reported that recent kernels occasionally hang when used with NFS in readahead code. The problem has been bisected to 7c877586da3 ("readahead: properly shorten readahead when falling back to do_page_cache_ra()"). The cause of the problem is that ra->size can be shrunk by read_pages() call and subsequently we end up calling do_page_cache_ra() with negative (read huge positive) number of pages. Let's revert 7c877586da3 for now until we can find a proper way how the logic in read_pages() and page_cache_ra_order() can coexist. This can lead to reduced readahead throughput due to readahead window confusion but that's better than outright hangs.

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-pcm: don't use soc_pcm_ret() on .prepare callback commit 1f5664351410 ("ASoC: lower "no backend DAIs enabled for ... Port" log severity") ignores -EINVAL error message on common soc_pcm_ret(). It is used from many functions, ignoring -EINVAL is over-kill. The reason why -EINVAL was ignored was it really should only be used upon invalid parameters coming from userspace and in that case we don't want to log an error since we do not want to give userspace a way to do a denial-of-service attack on the syslog / diskspace. So don't use soc_pcm_ret() on .prepare callback is better idea.

In the Linux kernel, the following vulnerability has been resolved: bpf: consider that tail calls invalidate packet pointers Tail-called programs could execute any of the helpers that invalidate packet pointers. Hence, conservatively assume that each tail call invalidates packet pointers. Making the change in bpf_helper_changes_pkt_data() automatically makes use of check_cfg() logic that computes 'changes_pkt_data' effect for global sub-programs, such that the following program could be rejected: int tail_call(struct __sk_buff *sk) { bpf_tail_call_static(sk, &jmp_table, 0); return 0; } SEC("tc") int not_safe(struct __sk_buff *sk) { int *p = (void *)(long)sk->data; ... make p valid ... tail_call(sk); *p = 42; /* this is unsafe */ ... } The tc_bpf2bpf.c:subprog_tc() needs change: mark it as a function that can invalidate packet pointers. Otherwise, it can't be freplaced with tailcall_freplace.c:entry_freplace() that does a tail call.

A use-after-free vulnerability was found in the cxgb4 driver in the Linux kernel. The bug occurs when the cxgb4 device is detaching due to a possible rearming of the flower_stats_timer from the work queue. This flaw allows a local user to crash the system, causing a denial of service condition.

In the Linux kernel, the following vulnerability has been resolved: exfat: fix the infinite loop in exfat_readdir() If the file system is corrupted so that a cluster is linked to itself in the cluster chain, and there is an unused directory entry in the cluster, 'dentry' will not be incremented, causing condition 'dentry < max_dentries' unable to prevent an infinite loop. This infinite loop causes s_lock not to be released, and other tasks will hang, such as exfat_sync_fs(). This commit stops traversing the cluster chain when there is unused directory entry in the cluster to avoid this infinite loop.

In the Linux kernel, the following vulnerability has been resolved: io_uring: check if iowq is killed before queuing task work can be executed after the task has gone through io_uring termination, whether it's the final task_work run or the fallback path. In this case, task work will find ->io_wq being already killed and null'ed, which is a problem if it then tries to forward the request to io_queue_iowq(). Make io_queue_iowq() fail requests in this case. Note that it also checks PF_KTHREAD, because the user can first close a DEFER_TASKRUN ring and shortly after kill the task, in which case ->iowq check would race.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fail verification for sign-extension of packet data/data_end/data_meta syzbot reported a kernel crash due to commit 1f1e864b6555 ("bpf: Handle sign-extenstin ctx member accesses"). The reason is due to sign-extension of 32-bit load for packet data/data_end/data_meta uapi field. The original code looks like: r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */ r3 = *(u32 *)(r1 + 80) /* load __sk_buff->data_end */ r0 = r2 r0 += 8 if r3 > r0 goto +1 ... Note that __sk_buff->data load has 32-bit sign extension. After verification and convert_ctx_accesses(), the final asm code looks like: r2 = *(u64 *)(r1 +208) r2 = (s32)r2 r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 ... Note that 'r2 = (s32)r2' may make the kernel __sk_buff->data address invalid which may cause runtime failure. Currently, in C code, typically we have void *data = (void *)(long)skb->data; void *data_end = (void *)(long)skb->data_end; ... and it will generate r2 = *(u64 *)(r1 +208) r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 If we allow sign-extension, void *data = (void *)(long)(int)skb->data; void *data_end = (void *)(long)skb->data_end; ... the generated code looks like r2 = *(u64 *)(r1 +208) r2 <<= 32 r2 s>>= 32 r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 and this will cause verification failure since "r2 <<= 32" is not allowed as "r2" is a packet pointer. To fix this issue for case r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */ this patch added additional checking in is_valid_access() callback function for packet data/data_end/data_meta access. If those accesses are with sign-extenstion, the verification will fail. [1] https://lore.kernel.org/bpf/000000000000c90eee061d236d37@google.com/

A use-after-free vulnerability was found in the cyttsp4_core driver in the Linux kernel. This issue occurs in the device cleanup routine due to a possible rearming of the watchdog_timer from the workqueue. This could allow a local user to crash the system, causing a denial of service.

In the Linux kernel, the following vulnerability has been resolved: workqueue: Do not warn when cancelling WQ_MEM_RECLAIM work from !WQ_MEM_RECLAIM worker After commit 746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM") amdgpu started seeing the following warning: [ ] workqueue: WQ_MEM_RECLAIM sdma0:drm_sched_run_job_work [gpu_sched] is flushing !WQ_MEM_RECLAIM events:amdgpu_device_delay_enable_gfx_off [amdgpu] ... [ ] Workqueue: sdma0 drm_sched_run_job_work [gpu_sched] ... [ ] Call Trace: [ ] <TASK> ... [ ] ? check_flush_dependency+0xf5/0x110 ... [ ] cancel_delayed_work_sync+0x6e/0x80 [ ] amdgpu_gfx_off_ctrl+0xab/0x140 [amdgpu] [ ] amdgpu_ring_alloc+0x40/0x50 [amdgpu] [ ] amdgpu_ib_schedule+0xf4/0x810 [amdgpu] [ ] ? drm_sched_run_job_work+0x22c/0x430 [gpu_sched] [ ] amdgpu_job_run+0xaa/0x1f0 [amdgpu] [ ] drm_sched_run_job_work+0x257/0x430 [gpu_sched] [ ] process_one_work+0x217/0x720 ... [ ] </TASK> The intent of the verifcation done in check_flush_depedency is to ensure forward progress during memory reclaim, by flagging cases when either a memory reclaim process, or a memory reclaim work item is flushed from a context not marked as memory reclaim safe. This is correct when flushing, but when called from the cancel(_delayed)_work_sync() paths it is a false positive because work is either already running, or will not be running at all. Therefore cancelling it is safe and we can relax the warning criteria by letting the helper know of the calling context. References: 746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM")

In the Linux kernel, the following vulnerability has been resolved: misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling Resolve kernel panic caused by improper handling of IRQs while accessing GPIO values. This is done by replacing generic_handle_irq with handle_nested_irq.

In the Linux kernel, the following vulnerability has been resolved: net: restrict SO_REUSEPORT to inet sockets After blamed commit, crypto sockets could accidentally be destroyed from RCU call back, as spotted by zyzbot [1]. Trying to acquire a mutex in RCU callback is not allowed. Restrict SO_REUSEPORT socket option to inet sockets. v1 of this patch supported TCP, UDP and SCTP sockets, but fcnal-test.sh test needed RAW and ICMP support. [1] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:562 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 24, name: ksoftirqd/1 preempt_count: 100, expected: 0 RCU nest depth: 0, expected: 0 1 lock held by ksoftirqd/1/24: #0: ffffffff8e937ba0 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:337 [inline] #0: ffffffff8e937ba0 (rcu_callback){....}-{0:0}, at: rcu_do_batch kernel/rcu/tree.c:2561 [inline] #0: ffffffff8e937ba0 (rcu_callback){....}-{0:0}, at: rcu_core+0xa37/0x17a0 kernel/rcu/tree.c:2823 Preemption disabled at: [<ffffffff8161c8c8>] softirq_handle_begin kernel/softirq.c:402 [inline] [<ffffffff8161c8c8>] handle_softirqs+0x128/0x9b0 kernel/softirq.c:537 CPU: 1 UID: 0 PID: 24 Comm: ksoftirqd/1 Not tainted 6.13.0-rc3-syzkaller-00174-ga024e377efed #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 __might_resched+0x5d4/0x780 kernel/sched/core.c:8758 __mutex_lock_common kernel/locking/mutex.c:562 [inline] __mutex_lock+0x131/0xee0 kernel/locking/mutex.c:735 crypto_put_default_null_skcipher+0x18/0x70 crypto/crypto_null.c:179 aead_release+0x3d/0x50 crypto/algif_aead.c:489 alg_do_release crypto/af_alg.c:118 [inline] alg_sock_destruct+0x86/0xc0 crypto/af_alg.c:502 __sk_destruct+0x58/0x5f0 net/core/sock.c:2260 rcu_do_batch kernel/rcu/tree.c:2567 [inline] rcu_core+0xaaa/0x17a0 kernel/rcu/tree.c:2823 handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561 run_ksoftirqd+0xca/0x130 kernel/softirq.c:950 smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK>

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix divide error in DM plane scale calcs dm_get_plane_scale doesn't take into account plane scaled size equal to zero, leading to a kernel oops due to division by zero. Fix by setting out-scale size as zero when the dst size is zero, similar to what is done by drm_calc_scale(). This issue started with the introduction of cursor ovelay mode that uses this function to assess cursor mode changes via dm_crtc_get_cursor_mode() before checking plane state. [Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI [ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ #231 [ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66 [ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246 [ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500 [ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4 [ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00 [ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010 [ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0 [ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0 [ +0.000004] Call Trace: [ +0.000007] <TASK> [ +0.000006] ? __die_body.cold+0x19/0x27 [ +0.000009] ? die+0x2e/0x50 [ +0.000007] ? do_trap+0xca/0x110 [ +0.000007] ? do_error_trap+0x6a/0x90 [ +0.000006] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000504] ? exc_divide_error+0x38/0x50 [ +0.000005] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000488] ? asm_exc_divide_error+0x1a/0x20 [ +0.000011] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000593] dm_crtc_get_cursor_mode+0x33f/0x430 [amdgpu] [ +0.000562] amdgpu_dm_atomic_check+0x2ef/0x1770 [amdgpu] [ +0.000501] drm_atomic_check_only+0x5e1/0xa30 [drm] [ +0.000047] drm_mode_atomic_ioctl+0x832/0xcb0 [drm] [ +0.000050] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000047] drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000062] drm_ioctl+0x27a/0x4f0 [drm] [ +0.000049] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000055] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ +0.000360] __x64_sys_ioctl+0x97/0xd0 [ +0.000010] do_syscall_64+0x82/0x190 [ +0.000008] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000044] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000040] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __check_object_size+0x50/0x220 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? drm_ioctl+0x2a4/0x4f0 [drm] [ +0.000039] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000043] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pm_runtime_suspend+0x69/0xc0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? amdgpu_drm_ioctl+0x71/0x90 [amdgpu] [ +0.000366] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? syscall_exit_to_user_mode+0x77/0x210 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000008] RIP: 0033:0x55bb7cd962bc [ +0.000007] Code: 4c 89 6c 24 18 4c 89 64 24 20 4c 89 74 24 28 0f 57 c0 0f 11 44 24 30 89 c7 48 8d 54 24 08 b8 10 00 00 00 be bc 64 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: prohibit deactivating all links In the internal API this calls this is a WARN_ON, but that should remain since internally we want to know about bugs that may cause this. Prevent deactivating all links in the debugfs write directly.

In the Linux kernel, the following vulnerability has been resolved: gve: guard XDP xmit NDO on existence of xdp queues In GVE, dedicated XDP queues only exist when an XDP program is installed and the interface is up. As such, the NDO XDP XMIT callback should return early if either of these conditions are false. In the case of no loaded XDP program, priv->num_xdp_queues=0 which can cause a divide-by-zero error, and in the case of interface down, num_xdp_queues remains untouched to persist XDP queue count for the next interface up, but the TX pointer itself would be NULL. The XDP xmit callback also needs to synchronize with a device transitioning from open to close. This synchronization will happen via the GVE_PRIV_FLAGS_NAPI_ENABLED bit along with a synchronize_net() call, which waits for any RCU critical sections at call-time to complete.

In the Linux kernel, the following vulnerability has been resolved: ipmi: ipmb: Add check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix RCU stall while reaping monitor destination ring While processing the monitor destination ring, MSDUs are reaped from the link descriptor based on the corresponding buf_id. However, sometimes the driver cannot obtain a valid buffer corresponding to the buf_id received from the hardware. This causes an infinite loop in the destination processing, resulting in a kernel crash. kernel log: ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed Fix this by skipping the problematic buf_id and reaping the next entry, replacing the break with the next MSDU processing. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: netrom: check buffer length before accessing it Syzkaller reports an uninit value read from ax25cmp when sending raw message through ieee802154 implementation. ===================================================== BUG: KMSAN: uninit-value in ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119 ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119 nr_dev_get+0x20e/0x450 net/netrom/nr_route.c:601 nr_route_frame+0x1a2/0xfc0 net/netrom/nr_route.c:774 nr_xmit+0x5a/0x1c0 net/netrom/nr_dev.c:144 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] raw_sendmsg+0x654/0xc10 net/ieee802154/socket.c:299 ieee802154_sock_sendmsg+0x91/0xc0 net/ieee802154/socket.c:96 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] raw_sendmsg+0x36d/0xc10 net/ieee802154/socket.c:282 ieee802154_sock_sendmsg+0x91/0xc0 net/ieee802154/socket.c:96 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 5037 Comm: syz-executor166 Not tainted 6.7.0-rc7-syzkaller-00003-gfbafc3e621c3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 ===================================================== This issue occurs because the skb buffer is too small, and it's actual allocation is aligned. This hides an actual issue, which is that nr_route_frame does not validate the buffer size before using it. Fix this issue by checking skb->len before accessing any fields in skb->data. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: s390/stacktrace: Use break instead of return statement arch_stack_walk_user_common() contains a return statement instead of a break statement in case store_ip() fails while trying to store a callchain entry of a user space process. This may lead to a missing pagefault_enable() call. If this happens any subsequent page fault of the process won't be resolved by the page fault handler and this in turn will lead to the process being killed. Use a break instead of a return statement to fix this.

In the Linux kernel, the following vulnerability has been resolved: bpf: Mark raw_tp arguments with PTR_MAYBE_NULL Arguments to a raw tracepoint are tagged as trusted, which carries the semantics that the pointer will be non-NULL. However, in certain cases, a raw tracepoint argument may end up being NULL. More context about this issue is available in [0]. Thus, there is a discrepancy between the reality, that raw_tp arguments can actually be NULL, and the verifier's knowledge, that they are never NULL, causing explicit NULL checks to be deleted, and accesses to such pointers potentially crashing the kernel. To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special case the dereference and pointer arithmetic to permit it, and allow passing them into helpers/kfuncs; these exceptions are made for raw_tp programs only. Ensure that we don't do this when ref_obj_id > 0, as in that case this is an acquired object and doesn't need such adjustment. The reason we do mask_raw_tp_trusted_reg logic is because other will recheck in places whether the register is a trusted_reg, and then consider our register as untrusted when detecting the presence of the PTR_MAYBE_NULL flag. To allow safe dereference, we enable PROBE_MEM marking when we see loads into trusted pointers with PTR_MAYBE_NULL. While trusted raw_tp arguments can also be passed into helpers or kfuncs where such broken assumption may cause issues, a future patch set will tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can already be passed into helpers and causes similar problems. Thus, they are left alone for now. It is possible that these checks also permit passing non-raw_tp args that are trusted PTR_TO_BTF_ID with null marking. In such a case, allowing dereference when pointer is NULL expands allowed behavior, so won't regress existing programs, and the case of passing these into helpers is the same as above and will be dealt with later. Also update the failure case in tp_btf_nullable selftest to capture the new behavior, as the verifier will no longer cause an error when directly dereference a raw tracepoint argument marked as __nullable. [0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb

In the Linux kernel, the following vulnerability has been resolved: geneve: do not assume mac header is set in geneve_xmit_skb() We should not assume mac header is set in output path. Use skb_eth_hdr() instead of eth_hdr() to fix the issue. sysbot reported the following : WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 skb_mac_header include/linux/skbuff.h:3052 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 eth_hdr include/linux/if_ether.h:24 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit_skb drivers/net/geneve.c:898 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039 Modules linked in: CPU: 0 UID: 0 PID: 11635 Comm: syz.4.1423 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_mac_header include/linux/skbuff.h:3052 [inline] RIP: 0010:eth_hdr include/linux/if_ether.h:24 [inline] RIP: 0010:geneve_xmit_skb drivers/net/geneve.c:898 [inline] RIP: 0010:geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039 Code: 21 c6 02 e9 35 d4 ff ff e8 a5 48 4c fb 90 0f 0b 90 e9 fd f5 ff ff e8 97 48 4c fb 90 0f 0b 90 e9 d8 f5 ff ff e8 89 48 4c fb 90 <0f> 0b 90 e9 41 e4 ff ff e8 7b 48 4c fb 90 0f 0b 90 e9 cd e7 ff ff RSP: 0018:ffffc90003b2f870 EFLAGS: 00010283 RAX: 000000000000037a RBX: 000000000000ffff RCX: ffffc9000dc3d000 RDX: 0000000000080000 RSI: ffffffff86428417 RDI: 0000000000000003 RBP: ffffc90003b2f9f0 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff88806603c000 R13: 0000000000000000 R14: ffff8880685b2780 R15: 0000000000000e23 FS: 00007fdc2deed6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30a1dff8 CR3: 0000000056b8c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] __dev_direct_xmit+0x58a/0x720 net/core/dev.c:4490 dev_direct_xmit include/linux/netdevice.h:3181 [inline] packet_xmit+0x1e4/0x360 net/packet/af_packet.c:285 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x2700/0x5660 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] __sys_sendto+0x488/0x4f0 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0xe0/0x1c0 net/socket.c:2200 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: ad7780: fix division by zero in ad7780_write_raw() In the ad7780_write_raw() , val2 can be zero, which might lead to a division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw() is based on iio_info's write_raw. While val is explicitly declared that can be zero (in read mode), val2 is not specified to be non-zero.

In the Linux kernel, the following vulnerability has been resolved: btrfs: add a sanity check for btrfs root in btrfs_search_slot() Syzbot reports a null-ptr-deref in btrfs_search_slot(). The reproducer is using rescue=ibadroots, and the extent tree root is corrupted thus the extent tree is NULL. When scrub tries to search the extent tree to gather the needed extent info, btrfs_search_slot() doesn't check if the target root is NULL or not, resulting the null-ptr-deref. Add sanity check for btrfs root before using it in btrfs_search_slot().

In the Linux kernel, the following vulnerability has been resolved: virtio_net: correct netdev_tx_reset_queue() invocation point When virtnet_close is followed by virtnet_open, some TX completions can possibly remain unconsumed, until they are finally processed during the first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash [1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call before RX napi enable") was not sufficient to eliminate all BQL crash cases for virtio-net. This issue can be reproduced with the latest net-next master by running: `while :; do ip l set DEV down; ip l set DEV up; done` under heavy network TX load from inside the machine. netdev_tx_reset_queue() can actually be dropped from virtnet_open path; the device is not stopped in any case. For BQL core part, it's just like traffic nearly ceases to exist for some period. For stall detector added to BQL, even if virtnet_close could somehow lead to some TX completions delayed for long, followed by virtnet_open, we can just take it as stall as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector based on BQL"). Note also that users can still reset stall_max via sysfs. So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now explicitly required in freeze/restore path. This patch adds it to immediately after free_unused_bufs(), following the rule of thumb: netdev_tx_reset_queue() should follow any SKB freeing not followed by netdev_tx_completed_queue(). This seems the most consistent and streamlined approach, and now netdev_tx_reset_queue() runs whenever free_unused_bufs() is done. [1]: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2 Tainted: [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \ BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dql_completed+0x26b/0x290 Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d 4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01 d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009 RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000 RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001 R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40 FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <IRQ> ? die+0x32/0x80 ? do_trap+0xd9/0x100 ? dql_completed+0x26b/0x290 ? dql_completed+0x26b/0x290 ? do_error_trap+0x6d/0xb0 ? dql_completed+0x26b/0x290 ? exc_invalid_op+0x4c/0x60 ? dql_completed+0x26b/0x290 ? asm_exc_invalid_op+0x16/0x20 ? dql_completed+0x26b/0x290 __free_old_xmit+0xff/0x170 [virtio_net] free_old_xmit+0x54/0xc0 [virtio_net] virtnet_poll+0xf4/0xe30 [virtio_net] ? __update_load_avg_cfs_rq+0x264/0x2d0 ? update_curr+0x35/0x260 ? reweight_entity+0x1be/0x260 __napi_poll.constprop.0+0x28/0x1c0 net_rx_action+0x329/0x420 ? enqueue_hrtimer+0x35/0x90 ? trace_hardirqs_on+0x1d/0x80 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xd/0x1a0 handle_softirqs+0x138/0x3e0 do_softirq.part.0+0x89/0xc0 </IRQ> <TASK> __local_bh_enable_ip+0xa7/0xb0 virtnet_open+0xc8/0x310 [virtio_net] __dev_open+0xfa/0x1b0 __dev_change_flags+0x1de/0x250 dev_change_flags+0x22/0x60 do_setlink.isra.0+0x2df/0x10b0 ? rtnetlink_rcv_msg+0x34f/0x3f0 ? netlink_rcv_skb+0x54/0x100 ? netlink_unicas ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur The action force umount(umount -f) will attempt to kill all rpc_task even umount operation may ultimately fail if some files remain open. Consequently, if an action attempts to open a file, it can potentially send two rpc_task to nfs server. NFS CLIENT thread1 thread2 open("file") ... nfs4_do_open _nfs4_do_open _nfs4_open_and_get_state _nfs4_proc_open nfs4_run_open_task /* rpc_task1 */ rpc_run_task rpc_wait_for_completion_task umount -f nfs_umount_begin rpc_killall_tasks rpc_signal_task rpc_task1 been wakeup and return -512 _nfs4_do_open // while loop ... nfs4_run_open_task /* rpc_task2 */ rpc_run_task rpc_wait_for_completion_task While processing an open request, nfsd will first attempt to find or allocate an nfs4_openowner. If it finds an nfs4_openowner that is not marked as NFS4_OO_CONFIRMED, this nfs4_openowner will released. Since two rpc_task can attempt to open the same file simultaneously from the client to server, and because two instances of nfsd can run concurrently, this situation can lead to lots of memory leak. Additionally, when we echo 0 to /proc/fs/nfsd/threads, warning will be triggered. NFS SERVER nfsd1 nfsd2 echo 0 > /proc/fs/nfsd/threads nfsd4_open nfsd4_process_open1 find_or_alloc_open_stateowner // alloc oo1, stateid1 nfsd4_open nfsd4_process_open1 find_or_alloc_open_stateowner // find oo1, without NFS4_OO_CONFIRMED release_openowner unhash_openowner_locked list_del_init(&oo->oo_perclient) // cannot find this oo // from client, LEAK!!! alloc_stateowner // alloc oo2 nfsd4_process_open2 init_open_stateid // associate oo1 // with stateid1, stateid1 LEAK!!! nfs4_get_vfs_file // alloc nfsd_file1 and nfsd_file_mark1 // all LEAK!!! nfsd4_process_open2 ... write_threads ... nfsd_destroy_serv nfsd_shutdown_net nfs4_state_shutdown_net nfs4_state_destroy_net destroy_client __destroy_client // won't find oo1!!! nfsd_shutdown_generic nfsd_file_cache_shutdown kmem_cache_destroy for nfsd_file_slab and nfsd_file_mark_slab // bark since nfsd_file1 // and nfsd_file_mark1 // still alive ======================================================================= BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on __kmem_cache_shutdown() ----------------------------------------------------------------------- Slab 0xffd4000004438a80 objects=34 used=1 fp=0xff11000110e2ad28 flags=0x17ffffc0000240(workingset|head|node=0|zone=2|lastcpupid=0x1fffff) CPU: 4 UID: 0 PID: 757 Comm: sh Not tainted 6.12.0-rc6+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dum ---truncated---

In the Linux kernel, the following vulnerability has been resolved: riscv: mm: Do not call pmd dtor on vmemmap page table teardown The vmemmap's, which is used for RV64 with SPARSEMEM_VMEMMAP, page tables are populated using pmd (page middle directory) hugetables. However, the pmd allocation is not using the generic mechanism used by the VMA code (e.g. pmd_alloc()), or the RISC-V specific create_pgd_mapping()/alloc_pmd_late(). Instead, the vmemmap page table code allocates a page, and calls vmemmap_set_pmd(). This results in that the pmd ctor is *not* called, nor would it make sense to do so. Now, when tearing down a vmemmap page table pmd, the cleanup code would unconditionally, and incorrectly call the pmd dtor, which results in a crash (best case). This issue was found when running the HMM selftests: | tools/testing/selftests/mm# ./test_hmm.sh smoke | ... # when unloading the test_hmm.ko module | page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10915b | flags: 0x1000000000000000(node=0|zone=1) | raw: 1000000000000000 0000000000000000 dead000000000122 0000000000000000 | raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 | page dumped because: VM_BUG_ON_PAGE(ptdesc->pmd_huge_pte) | ------------[ cut here ]------------ | kernel BUG at include/linux/mm.h:3080! | Kernel BUG [#1] | Modules linked in: test_hmm(-) sch_fq_codel fuse drm drm_panel_orientation_quirks backlight dm_mod | CPU: 1 UID: 0 PID: 514 Comm: modprobe Tainted: G W 6.12.0-00982-gf2a4f1682d07 #2 | Tainted: [W]=WARN | Hardware name: riscv-virtio qemu/qemu, BIOS 2024.10 10/01/2024 | epc : remove_pgd_mapping+0xbec/0x1070 | ra : remove_pgd_mapping+0xbec/0x1070 | epc : ffffffff80010a68 ra : ffffffff80010a68 sp : ff20000000a73940 | gp : ffffffff827b2d88 tp : ff6000008785da40 t0 : ffffffff80fbce04 | t1 : 0720072007200720 t2 : 706d756420656761 s0 : ff20000000a73a50 | s1 : ff6000008915cff8 a0 : 0000000000000039 a1 : 0000000000000008 | a2 : ff600003fff0de20 a3 : 0000000000000000 a4 : 0000000000000000 | a5 : 0000000000000000 a6 : c0000000ffffefff a7 : ffffffff824469b8 | s2 : ff1c0000022456c0 s3 : ff1ffffffdbfffff s4 : ff6000008915c000 | s5 : ff6000008915c000 s6 : ff6000008915c000 s7 : ff1ffffffdc00000 | s8 : 0000000000000001 s9 : ff1ffffffdc00000 s10: ffffffff819a31f0 | s11: ffffffffffffffff t3 : ffffffff8000c950 t4 : ff60000080244f00 | t5 : ff60000080244000 t6 : ff20000000a73708 | status: 0000000200000120 badaddr: ffffffff80010a68 cause: 0000000000000003 | [<ffffffff80010a68>] remove_pgd_mapping+0xbec/0x1070 | [<ffffffff80fd238e>] vmemmap_free+0x14/0x1e | [<ffffffff8032e698>] section_deactivate+0x220/0x452 | [<ffffffff8032ef7e>] sparse_remove_section+0x4a/0x58 | [<ffffffff802f8700>] __remove_pages+0x7e/0xba | [<ffffffff803760d8>] memunmap_pages+0x2bc/0x3fe | [<ffffffff02a3ca28>] dmirror_device_remove_chunks+0x2ea/0x518 [test_hmm] | [<ffffffff02a3e026>] hmm_dmirror_exit+0x3e/0x1018 [test_hmm] | [<ffffffff80102c14>] __riscv_sys_delete_module+0x15a/0x2a6 | [<ffffffff80fd020c>] do_trap_ecall_u+0x1f2/0x266 | [<ffffffff80fde0a2>] _new_vmalloc_restore_context_a0+0xc6/0xd2 | Code: bf51 7597 0184 8593 76a5 854a 4097 0029 80e7 2c00 (9002) 7597 | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: Fatal exception in interrupt Add a check to avoid calling the pmd dtor, if the calling context is vmemmap_free().

In the Linux kernel, the following vulnerability has been resolved: kunit: Fix potential null dereference in kunit_device_driver_test() kunit_kzalloc() may return a NULL pointer, dereferencing it without NULL check may lead to NULL dereference. Add a NULL check for test_state.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL deref in cleanup_bearer() syzbot found [1] that after blamed commit, ub->ubsock->sk was NULL when attempting the atomic_dec() : atomic_dec(&tipc_net(sock_net(ub->ubsock->sk))->wq_count); Fix this by caching the tipc_net pointer. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 0 UID: 0 PID: 5896 Comm: kworker/0:3 Not tainted 6.13.0-rc1-next-20241203-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events cleanup_bearer RIP: 0010:read_pnet include/net/net_namespace.h:387 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:cleanup_bearer+0x1f7/0x280 net/tipc/udp_media.c:820 Code: 18 48 89 d8 48 c1 e8 03 42 80 3c 28 00 74 08 48 89 df e8 3c f7 99 f6 48 8b 1b 48 83 c3 30 e8 f0 e4 60 00 48 89 d8 48 c1 e8 03 <42> 80 3c 28 00 74 08 48 89 df e8 1a f7 99 f6 49 83 c7 e8 48 8b 1b RSP: 0018:ffffc9000410fb70 EFLAGS: 00010206 RAX: 0000000000000006 RBX: 0000000000000030 RCX: ffff88802fe45a00 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffc9000410f900 RBP: ffff88807e1f0908 R08: ffffc9000410f907 R09: 1ffff92000821f20 R10: dffffc0000000000 R11: fffff52000821f21 R12: ffff888031d19980 R13: dffffc0000000000 R14: dffffc0000000000 R15: ffff88807e1f0918 FS: 0000000000000000(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ca050b000 CR3: 0000000031c0c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

In the Linux kernel, the following vulnerability has been resolved: netfs/fscache: Add a memory barrier for FSCACHE_VOLUME_CREATING In fscache_create_volume(), there is a missing memory barrier between the bit-clearing operation and the wake-up operation. This may cause a situation where, after a wake-up, the bit-clearing operation hasn't been detected yet, leading to an indefinite wait. The triggering process is as follows: [cookie1] [cookie2] [volume_work] fscache_perform_lookup fscache_create_volume fscache_perform_lookup fscache_create_volume fscache_create_volume_work cachefiles_acquire_volume clear_and_wake_up_bit test_and_set_bit test_and_set_bit goto maybe_wait goto no_wait In the above process, cookie1 and cookie2 has the same volume. When cookie1 enters the -no_wait- process, it will clear the bit and wake up the waiting process. If a barrier is missing, it may cause cookie2 to remain in the -wait- process indefinitely. In commit 3288666c7256 ("fscache: Use clear_and_wake_up_bit() in fscache_create_volume_work()"), barriers were added to similar operations in fscache_create_volume_work(), but fscache_create_volume() was missed. By combining the clear and wake operations into clear_and_wake_up_bit() to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Create all dump files during debugfs initialization For the current debugfs of hisi_sas, after user triggers dump, the driver allocate memory space to save the register information and create debugfs files to display the saved information. In this process, the debugfs files created after each dump. Therefore, when the dump is triggered while the driver is unbind, the following hang occurs: [67840.853907] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [67840.862947] Mem abort info: [67840.865855] ESR = 0x0000000096000004 [67840.869713] EC = 0x25: DABT (current EL), IL = 32 bits [67840.875125] SET = 0, FnV = 0 [67840.878291] EA = 0, S1PTW = 0 [67840.881545] FSC = 0x04: level 0 translation fault [67840.886528] Data abort info: [67840.889524] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [67840.895117] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [67840.900284] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [67840.905709] user pgtable: 4k pages, 48-bit VAs, pgdp=0000002803a1f000 [67840.912263] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000 [67840.919177] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [67840.996435] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [67841.003628] pc : down_write+0x30/0x98 [67841.007546] lr : start_creating.part.0+0x60/0x198 [67841.012495] sp : ffff8000b979ba20 [67841.016046] x29: ffff8000b979ba20 x28: 0000000000000010 x27: 0000000000024b40 [67841.023412] x26: 0000000000000012 x25: ffff20202b355ae8 x24: ffff20202b35a8c8 [67841.030779] x23: ffffa36877928208 x22: ffffa368b4972240 x21: ffff8000b979bb18 [67841.038147] x20: ffff00281dc1e3c0 x19: fffffffffffffffe x18: 0000000000000020 [67841.045515] x17: 0000000000000000 x16: ffffa368b128a530 x15: ffffffffffffffff [67841.052888] x14: ffff8000b979bc18 x13: ffffffffffffffff x12: ffff8000b979bb18 [67841.060263] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa368b1289b18 [67841.067640] x8 : 0000000000000012 x7 : 0000000000000000 x6 : 00000000000003a9 [67841.075014] x5 : 0000000000000000 x4 : ffff002818c5cb00 x3 : 0000000000000001 [67841.082388] x2 : 0000000000000000 x1 : ffff002818c5cb00 x0 : 00000000000000a0 [67841.089759] Call trace: [67841.092456] down_write+0x30/0x98 [67841.096017] start_creating.part.0+0x60/0x198 [67841.100613] debugfs_create_dir+0x48/0x1f8 [67841.104950] debugfs_create_files_v3_hw+0x88/0x348 [hisi_sas_v3_hw] [67841.111447] debugfs_snapshot_regs_v3_hw+0x708/0x798 [hisi_sas_v3_hw] [67841.118111] debugfs_trigger_dump_v3_hw_write+0x9c/0x120 [hisi_sas_v3_hw] [67841.125115] full_proxy_write+0x68/0xc8 [67841.129175] vfs_write+0xd8/0x3f0 [67841.132708] ksys_write+0x70/0x108 [67841.136317] __arm64_sys_write+0x24/0x38 [67841.140440] invoke_syscall+0x50/0x128 [67841.144385] el0_svc_common.constprop.0+0xc8/0xf0 [67841.149273] do_el0_svc+0x24/0x38 [67841.152773] el0_svc+0x38/0xd8 [67841.156009] el0t_64_sync_handler+0xc0/0xc8 [67841.160361] el0t_64_sync+0x1a4/0x1a8 [67841.164189] Code: b9000882 d2800002 d2800023 f9800011 (c85ffc05) [67841.170443] ---[ end trace 0000000000000000 ]--- To fix this issue, create all directories and files during debugfs initialization. In this way, the driver only needs to allocate memory space to save information each time the user triggers dumping.

In the Linux kernel, the following vulnerability has been resolved: PCI/MSI: Handle lack of irqdomain gracefully Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a RISCV platform which does not provide PCI/MSI support: WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32 __pci_enable_msix_range+0x30c/0x596 pci_msi_setup_msi_irqs+0x2c/0x32 pci_alloc_irq_vectors_affinity+0xb8/0xe2 RISCV uses hierarchical interrupt domains and correctly does not implement the legacy fallback. The warning triggers from the legacy fallback stub. That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent domain is associated with the device or not. There is a check for MSI-X, which has a legacy assumption. But that legacy fallback assumption is only valid when legacy support is enabled, but otherwise the check should simply return -ENOTSUPP. Loongarch tripped over the same problem and blindly enabled legacy support without implementing the legacy fallbacks. There are weak implementations which return an error, so the problem was papered over. Correct pci_msi_domain_supports() to evaluate the legacy mode and add the missing supported check into the MSI enable path to complete it.

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix migrate_to_node() assuming there is at least one VMA in a MM We currently assume that there is at least one VMA in a MM, which isn't true. So we might end up having find_vma() return NULL, to then de-reference NULL. So properly handle find_vma() returning NULL. This fixes the report: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 6021 Comm: syz-executor284 Not tainted 6.12.0-rc7-syzkaller-00187-gf868cd251776 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:migrate_to_node mm/mempolicy.c:1090 [inline] RIP: 0010:do_migrate_pages+0x403/0x6f0 mm/mempolicy.c:1194 Code: ... RSP: 0018:ffffc9000375fd08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffc9000375fd78 RCX: 0000000000000000 RDX: ffff88807e171300 RSI: dffffc0000000000 RDI: ffff88803390c044 RBP: ffff88807e171428 R08: 0000000000000014 R09: fffffbfff2039ef1 R10: ffffffff901cf78f R11: 0000000000000000 R12: 0000000000000003 R13: ffffc9000375fe90 R14: ffffc9000375fe98 R15: ffffc9000375fdf8 FS: 00005555919e1380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555919e1ca8 CR3: 000000007f12a000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> kernel_migrate_pages+0x5b2/0x750 mm/mempolicy.c:1709 __do_sys_migrate_pages mm/mempolicy.c:1727 [inline] __se_sys_migrate_pages mm/mempolicy.c:1723 [inline] __x64_sys_migrate_pages+0x96/0x100 mm/mempolicy.c:1723 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [akpm@linux-foundation.org: add unlikely()]

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: Check num_codecs is not zero to avoid panic during probe Following commit 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()"), COMP_DUMMY() became an array with zero length, and only gets populated with the dummy struct after the card is registered. Since the sound card driver's probe happens before the card registration, accessing any of the members of a dummy component during probe will result in undefined behavior. This can be observed in the mt8188 and mt8195 machine sound drivers. By omitting a dai link subnode in the sound card's node in the Devicetree, the default uninitialized dummy codec is used, and when its dai_name pointer gets passed to strcmp() it results in a null pointer dereference and a kernel panic. In addition to that, set_card_codec_info() in the generic helpers file, mtk-soundcard-driver.c, will populate a dai link with a dummy codec when a dai link node is present in DT but with no codec property. The result is that at probe time, a dummy codec can either be uninitialized with num_codecs = 0, or be an initialized dummy codec, with num_codecs = 1 and dai_name = "snd-soc-dummy-dai". In order to accommodate for both situations, check that num_codecs is not zero before accessing the codecs' fields but still check for the codec's dai name against "snd-soc-dummy-dai" as needed. While at it, also drop the check that dai_name is not null in the mt8192 driver, introduced in commit 4d4e1b6319e5 ("ASoC: mediatek: mt8192: Check existence of dai_name before dereferencing"), as it is actually redundant given the preceding num_codecs != 0 check.

In the Linux kernel, the following vulnerability has been resolved: udmabuf: change folios array from kmalloc to kvmalloc When PAGE_SIZE 4096, MAX_PAGE_ORDER 10, 64bit machine, page_alloc only support 4MB. If above this, trigger this warn and return NULL. udmabuf can change size limit, if change it to 3072(3GB), and then alloc 3GB udmabuf, will fail create. [ 4080.876581] ------------[ cut here ]------------ [ 4080.876843] WARNING: CPU: 3 PID: 2015 at mm/page_alloc.c:4556 __alloc_pages+0x2c8/0x350 [ 4080.878839] RIP: 0010:__alloc_pages+0x2c8/0x350 [ 4080.879470] Call Trace: [ 4080.879473] <TASK> [ 4080.879473] ? __alloc_pages+0x2c8/0x350 [ 4080.879475] ? __warn.cold+0x8e/0xe8 [ 4080.880647] ? __alloc_pages+0x2c8/0x350 [ 4080.880909] ? report_bug+0xff/0x140 [ 4080.881175] ? handle_bug+0x3c/0x80 [ 4080.881556] ? exc_invalid_op+0x17/0x70 [ 4080.881559] ? asm_exc_invalid_op+0x1a/0x20 [ 4080.882077] ? udmabuf_create+0x131/0x400 Because MAX_PAGE_ORDER, kmalloc can max alloc 4096 * (1 << 10), 4MB memory, each array entry is pointer(8byte), so can save 524288 pages(2GB). Further more, costly order(order 3) may not be guaranteed that it can be applied for, due to fragmentation. This patch change udmabuf array use kvmalloc_array, this can fallback alloc into vmalloc, which can guarantee allocation for any size and does not affect the performance of kmalloc allocations.

In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb() Hook "qed_ops->common->sb_init = qed_sb_init" does not release the DMA memory sb_virt when it fails. Add dma_free_coherent() to free it. This is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb().

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix qi_batch NULL pointer with nested parent domain The qi_batch is allocated when assigning cache tag for a domain. While for nested parent domain, it is missed. Hence, when trying to map pages to the nested parent, NULL dereference occurred. Also, there is potential memleak since there is no lock around domain->qi_batch allocation. To solve it, add a helper for qi_batch allocation, and call it in both the __cache_tag_assign_domain() and __cache_tag_assign_parent_domain(). BUG: kernel NULL pointer dereference, address: 0000000000000200 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8104795067 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 223 UID: 0 PID: 4357 Comm: qemu-system-x86 Not tainted 6.13.0-rc1-00028-g4b50c3c3b998-dirty #2632 Call Trace: ? __die+0x24/0x70 ? page_fault_oops+0x80/0x150 ? do_user_addr_fault+0x63/0x7b0 ? exc_page_fault+0x7c/0x220 ? asm_exc_page_fault+0x26/0x30 ? cache_tag_flush_range_np+0x13c/0x260 intel_iommu_iotlb_sync_map+0x1a/0x30 iommu_map+0x61/0xf0 batch_to_domain+0x188/0x250 iopt_area_fill_domains+0x125/0x320 ? rcu_is_watching+0x11/0x50 iopt_map_pages+0x63/0x100 iopt_map_common.isra.0+0xa7/0x190 iopt_map_user_pages+0x6a/0x80 iommufd_ioas_map+0xcd/0x1d0 iommufd_fops_ioctl+0x118/0x1c0 __x64_sys_ioctl+0x93/0xc0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Several fixes to bpf_msg_pop_data Several fixes to bpf_msg_pop_data, 1. In sk_msg_shift_left, we should put_page 2. if (len == 0), return early is better 3. pop the entire sk_msg (last == msg->sg.size) should be supported 4. Fix for the value of variable "a" 5. In sk_msg_shift_left, after shifting, i has already pointed to the next element. Addtional sk_msg_iter_var_next may result in BUG.

In the Linux kernel, the following vulnerability has been resolved: media: ts2020: fix null-ptr-deref in ts2020_probe() KASAN reported a null-ptr-deref issue when executing the following command: # echo ts2020 0x20 > /sys/bus/i2c/devices/i2c-0/new_device KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 53 UID: 0 PID: 970 Comm: systemd-udevd Not tainted 6.12.0-rc2+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) RIP: 0010:ts2020_probe+0xad/0xe10 [ts2020] RSP: 0018:ffffc9000abbf598 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffffc0714809 RDX: 0000000000000002 RSI: ffff88811550be00 RDI: 0000000000000010 RBP: ffff888109868800 R08: 0000000000000001 R09: fffff52001577eb6 R10: 0000000000000000 R11: ffffc9000abbff50 R12: ffffffffc0714790 R13: 1ffff92001577eb8 R14: ffffffffc07190d0 R15: 0000000000000001 FS: 00007f95f13b98c0(0000) GS:ffff888149280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555d2634b000 CR3: 0000000152236000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ts2020_probe+0xad/0xe10 [ts2020] i2c_device_probe+0x421/0xb40 really_probe+0x266/0x850 ... The cause of the problem is that when using sysfs to dynamically register an i2c device, there is no platform data, but the probe process of ts2020 needs to use platform data, resulting in a null pointer being accessed. Solve this problem by adding checks to platform data.

In the Linux kernel, the following vulnerability has been resolved: mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them.

In the Linux kernel, the following vulnerability has been resolved: soc: imx8m: Probe the SoC driver as platform driver With driver_async_probe=* on kernel command line, the following trace is produced because on i.MX8M Plus hardware because the soc-imx8m.c driver calls of_clk_get_by_name() which returns -EPROBE_DEFER because the clock driver is not yet probed. This was not detected during regular testing without driver_async_probe. Convert the SoC code to platform driver and instantiate a platform device in its current device_initcall() to probe the platform driver. Rework .soc_revision callback to always return valid error code and return SoC revision via parameter. This way, if anything in the .soc_revision callback return -EPROBE_DEFER, it gets propagated to .probe and the .probe will get retried later. " ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at drivers/soc/imx/soc-imx8m.c:115 imx8mm_soc_revision+0xdc/0x180 CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-next-20240924-00002-g2062bb554dea #603 Hardware name: DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3) (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : imx8mm_soc_revision+0xdc/0x180 lr : imx8mm_soc_revision+0xd0/0x180 sp : ffff8000821fbcc0 x29: ffff8000821fbce0 x28: 0000000000000000 x27: ffff800081810120 x26: ffff8000818a9970 x25: 0000000000000006 x24: 0000000000824311 x23: ffff8000817f42c8 x22: ffff0000df8be210 x21: fffffffffffffdfb x20: ffff800082780000 x19: 0000000000000001 x18: ffffffffffffffff x17: ffff800081fff418 x16: ffff8000823e1000 x15: ffff0000c03b65e8 x14: ffff0000c00051b0 x13: ffff800082790000 x12: 0000000000000801 x11: ffff80008278ffff x10: ffff80008209d3a6 x9 : ffff80008062e95c x8 : ffff8000821fb9a0 x7 : 0000000000000000 x6 : 00000000000080e3 x5 : ffff0000df8c03d8 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : fffffffffffffdfb x0 : fffffffffffffdfb Call trace: imx8mm_soc_revision+0xdc/0x180 imx8_soc_init+0xb0/0x1e0 do_one_initcall+0x94/0x1a8 kernel_init_freeable+0x240/0x2a8 kernel_init+0x28/0x140 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- SoC: i.MX8MP revision 1.1 "

In the Linux kernel, the following vulnerability has been resolved: net/sched: accept TCA_STAB only for root qdisc Most qdiscs maintain their backlog using qdisc_pkt_len(skb) on the assumption it is invariant between the enqueue() and dequeue() handlers. Unfortunately syzbot can crash a host rather easily using a TBF + SFQ combination, with an STAB on SFQ [1] We can't support TCA_STAB on arbitrary level, this would require to maintain per-qdisc storage. [1] [ 88.796496] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 88.798611] #PF: supervisor read access in kernel mode [ 88.799014] #PF: error_code(0x0000) - not-present page [ 88.799506] PGD 0 P4D 0 [ 88.799829] Oops: Oops: 0000 [#1] SMP NOPTI [ 88.800569] CPU: 14 UID: 0 PID: 2053 Comm: b371744477 Not tainted 6.12.0-rc1-virtme #1117 [ 88.801107] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 88.801779] RIP: 0010:sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.802544] Code: 0f b7 50 12 48 8d 04 d5 00 00 00 00 48 89 d6 48 29 d0 48 8b 91 c0 01 00 00 48 c1 e0 03 48 01 c2 66 83 7a 1a 00 7e c0 48 8b 3a <4c> 8b 07 4c 89 02 49 89 50 08 48 c7 47 08 00 00 00 00 48 c7 07 00 All code ======== 0: 0f b7 50 12 movzwl 0x12(%rax),%edx 4: 48 8d 04 d5 00 00 00 lea 0x0(,%rdx,8),%rax b: 00 c: 48 89 d6 mov %rdx,%rsi f: 48 29 d0 sub %rdx,%rax 12: 48 8b 91 c0 01 00 00 mov 0x1c0(%rcx),%rdx 19: 48 c1 e0 03 shl $0x3,%rax 1d: 48 01 c2 add %rax,%rdx 20: 66 83 7a 1a 00 cmpw $0x0,0x1a(%rdx) 25: 7e c0 jle 0xffffffffffffffe7 27: 48 8b 3a mov (%rdx),%rdi 2a:* 4c 8b 07 mov (%rdi),%r8 <-- trapping instruction 2d: 4c 89 02 mov %r8,(%rdx) 30: 49 89 50 08 mov %rdx,0x8(%r8) 34: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 3b: 00 3c: 48 rex.W 3d: c7 .byte 0xc7 3e: 07 (bad) ... Code starting with the faulting instruction =========================================== 0: 4c 8b 07 mov (%rdi),%r8 3: 4c 89 02 mov %r8,(%rdx) 6: 49 89 50 08 mov %rdx,0x8(%r8) a: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 11: 00 12: 48 rex.W 13: c7 .byte 0xc7 14: 07 (bad) ... [ 88.803721] RSP: 0018:ffff9a1f892b7d58 EFLAGS: 00000206 [ 88.804032] RAX: 0000000000000000 RBX: ffff9a1f8420c800 RCX: ffff9a1f8420c800 [ 88.804560] RDX: ffff9a1f81bc1440 RSI: 0000000000000000 RDI: 0000000000000000 [ 88.805056] RBP: ffffffffc04bb0e0 R08: 0000000000000001 R09: 00000000ff7f9a1f [ 88.805473] R10: 000000000001001b R11: 0000000000009a1f R12: 0000000000000140 [ 88.806194] R13: 0000000000000001 R14: ffff9a1f886df400 R15: ffff9a1f886df4ac [ 88.806734] FS: 00007f445601a740(0000) GS:ffff9a2e7fd80000(0000) knlGS:0000000000000000 [ 88.807225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.807672] CR2: 0000000000000000 CR3: 000000050cc46000 CR4: 00000000000006f0 [ 88.808165] Call Trace: [ 88.808459] <TASK> [ 88.808710] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 88.809261] ? page_fault_oops (arch/x86/mm/fault.c:715) [ 88.809561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539) [ 88.809806] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) [ 88.810074] ? sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.810411] sfq_reset (net/sched/sch_sfq.c:525) sch_sfq [ 88.810671] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_g ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfilter: br_netfilter: fix panic with metadata_dst skb Fix a kernel panic in the br_netfilter module when sending untagged traffic via a VxLAN device. This happens during the check for fragmentation in br_nf_dev_queue_xmit. It is dependent on: 1) the br_netfilter module being loaded; 2) net.bridge.bridge-nf-call-iptables set to 1; 3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port; 4) untagged frames with size higher than the VxLAN MTU forwarded/flooded When forwarding the untagged packet to the VxLAN bridge port, before the netfilter hooks are called, br_handle_egress_vlan_tunnel is called and changes the skb_dst to the tunnel dst. The tunnel_dst is a metadata type of dst, i.e., skb_valid_dst(skb) is false, and metadata->dst.dev is NULL. Then in the br_netfilter hooks, in br_nf_dev_queue_xmit, there's a check for frames that needs to be fragmented: frames with higher MTU than the VxLAN device end up calling br_nf_ip_fragment, which in turns call ip_skb_dst_mtu. The ip_dst_mtu tries to use the skb_dst(skb) as if it was a valid dst with valid dst->dev, thus the crash. This case was never supported in the first place, so drop the packet instead. PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data. [ 176.291791] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000110 [ 176.292101] Mem abort info: [ 176.292184] ESR = 0x0000000096000004 [ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits [ 176.292530] SET = 0, FnV = 0 [ 176.292709] EA = 0, S1PTW = 0 [ 176.292862] FSC = 0x04: level 0 translation fault [ 176.293013] Data abort info: [ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000 [ 176.294166] [0000000000000110] pgd=0000000000000000, p4d=0000000000000000 [ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth br_netfilter bridge stp llc ipv6 crct10dif_ce [ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted 6.8.0-rc3-g5b3fbd61b9d1 #2 [ 176.296314] Hardware name: linux,dummy-virt (DT) [ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter] [ 176.297636] sp : ffff800080003630 [ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27: ffff6828c49ad9f8 [ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24: 00000000000003e8 [ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21: ffff6828c3b16d28 [ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18: 0000000000000014 [ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15: 0000000095744632 [ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12: ffffb7e137926a70 [ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 : 0000000000000000 [ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 : f20e0100bebafeca [ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 : 0000000000000000 [ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 : ffff6828c7f918f0 [ 176.300889] Call trace: [ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter] [ 176.301703] nf_hook_slow+0x48/0x124 [ 176.302060] br_forward_finish+0xc8/0xe8 [bridge] [ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter] [ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter] [ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter] [ 176.303359] nf_hook_slow+0x48/0x124 [ 176.303 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Fix dtl_access_lock to be a rw_semaphore The dtl_access_lock needs to be a rw_sempahore, a sleeping lock, because the code calls kmalloc() while holding it, which can sleep: # echo 1 > /proc/powerpc/vcpudispatch_stats BUG: sleeping function called from invalid context at include/linux/sched/mm.h:337 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 199, name: sh preempt_count: 1, expected: 0 3 locks held by sh/199: #0: c00000000a0743f8 (sb_writers#3){.+.+}-{0:0}, at: vfs_write+0x324/0x438 #1: c0000000028c7058 (dtl_enable_mutex){+.+.}-{3:3}, at: vcpudispatch_stats_write+0xd4/0x5f4 #2: c0000000028c70b8 (dtl_access_lock){+.+.}-{2:2}, at: vcpudispatch_stats_write+0x220/0x5f4 CPU: 0 PID: 199 Comm: sh Not tainted 6.10.0-rc4 #152 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries Call Trace: dump_stack_lvl+0x130/0x148 (unreliable) __might_resched+0x174/0x410 kmem_cache_alloc_noprof+0x340/0x3d0 alloc_dtl_buffers+0x124/0x1ac vcpudispatch_stats_write+0x2a8/0x5f4 proc_reg_write+0xf4/0x150 vfs_write+0xfc/0x438 ksys_write+0x88/0x148 system_call_exception+0x1c4/0x5a0 system_call_common+0xf4/0x258

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_config_scan() Replace one-element array with a flexible-array member in `struct mwifiex_ie_types_wildcard_ssid_params` to fix the following warning on a MT8173 Chromebook (mt8173-elm-hana): [ 356.775250] ------------[ cut here ]------------ [ 356.784543] memcpy: detected field-spanning write (size 6) of single field "wildcard_ssid_tlv->ssid" at drivers/net/wireless/marvell/mwifiex/scan.c:904 (size 1) [ 356.813403] WARNING: CPU: 3 PID: 742 at drivers/net/wireless/marvell/mwifiex/scan.c:904 mwifiex_scan_networks+0x4fc/0xf28 [mwifiex] The "(size 6)" above is exactly the length of the SSID of the network this device was connected to. The source of the warning looks like: ssid_len = user_scan_in->ssid_list[i].ssid_len; [...] memcpy(wildcard_ssid_tlv->ssid, user_scan_in->ssid_list[i].ssid, ssid_len); There is a #define WILDCARD_SSID_TLV_MAX_SIZE that uses sizeof() on this struct, but it already didn't account for the size of the one-element array, so it doesn't need to be changed.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when uninstalling driver When the driver is uninstalled and the VF is disabled concurrently, a kernel crash occurs. The reason is that the two actions call function pci_disable_sriov(). The num_VFs is checked to determine whether to release the corresponding resources. During the second calling, num_VFs is not 0 and the resource release function is called. However, the corresponding resource has been released during the first invoking. Therefore, the problem occurs: [15277.839633][T50670] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... [15278.131557][T50670] Call trace: [15278.134686][T50670] klist_put+0x28/0x12c [15278.138682][T50670] klist_del+0x14/0x20 [15278.142592][T50670] device_del+0xbc/0x3c0 [15278.146676][T50670] pci_remove_bus_device+0x84/0x120 [15278.151714][T50670] pci_stop_and_remove_bus_device+0x6c/0x80 [15278.157447][T50670] pci_iov_remove_virtfn+0xb4/0x12c [15278.162485][T50670] sriov_disable+0x50/0x11c [15278.166829][T50670] pci_disable_sriov+0x24/0x30 [15278.171433][T50670] hnae3_unregister_ae_algo_prepare+0x60/0x90 [hnae3] [15278.178039][T50670] hclge_exit+0x28/0xd0 [hclge] [15278.182730][T50670] __se_sys_delete_module.isra.0+0x164/0x230 [15278.188550][T50670] __arm64_sys_delete_module+0x1c/0x30 [15278.193848][T50670] invoke_syscall+0x50/0x11c [15278.198278][T50670] el0_svc_common.constprop.0+0x158/0x164 [15278.203837][T50670] do_el0_svc+0x34/0xcc [15278.207834][T50670] el0_svc+0x20/0x30 For details, see the following figure. rmmod hclge disable VFs ---------------------------------------------------- hclge_exit() sriov_numvfs_store() ... device_lock() pci_disable_sriov() hns3_pci_sriov_configure() pci_disable_sriov() sriov_disable() sriov_disable() if !num_VFs : if !num_VFs : return; return; sriov_del_vfs() sriov_del_vfs() ... ... klist_put() klist_put() ... ... num_VFs = 0; num_VFs = 0; device_unlock(); In this patch, when driver is removing, we get the device_lock() to protect num_VFs, just like sriov_numvfs_store().

In the Linux kernel, the following vulnerability has been resolved: bpf: fix recursive lock when verdict program return SK_PASS When the stream_verdict program returns SK_PASS, it places the received skb into its own receive queue, but a recursive lock eventually occurs, leading to an operating system deadlock. This issue has been present since v6.9. ''' sk_psock_strp_data_ready write_lock_bh(&sk->sk_callback_lock) strp_data_ready strp_read_sock read_sock -> tcp_read_sock strp_recv cb.rcv_msg -> sk_psock_strp_read # now stream_verdict return SK_PASS without peer sock assign __SK_PASS = sk_psock_map_verd(SK_PASS, NULL) sk_psock_verdict_apply sk_psock_skb_ingress_self sk_psock_skb_ingress_enqueue sk_psock_data_ready read_lock_bh(&sk->sk_callback_lock) <= dead lock ''' This topic has been discussed before, but it has not been fixed. Previous discussion: https://lore.kernel.org/all/6684a5864ec86_403d20898@john.notmuch

In the Linux kernel, the following vulnerability has been resolved: media: platform: allegro-dvt: Fix possible memory leak in allocate_buffers_internal() The buffer in the loop should be released under the exception path, otherwise there may be a memory leak here. To mitigate this, free the buffer when allegro_alloc_buffer fails.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Use snd_card_free_when_closed() at disconnection The USB disconnect callback is supposed to be short and not too-long waiting. OTOH, the current code uses snd_card_free() at disconnection, but this waits for the close of all used fds, hence it can take long. It eventually blocks the upper layer USB ioctls, which may trigger a soft lockup. An easy workaround is to replace snd_card_free() with snd_card_free_when_closed(). This variant returns immediately while the release of resources is done asynchronously by the card device release at the last close.

In the Linux kernel, the following vulnerability has been resolved: net: fix crash when config small gso_max_size/gso_ipv4_max_size Config a small gso_max_size/gso_ipv4_max_size will lead to an underflow in sk_dst_gso_max_size(), which may trigger a BUG_ON crash, because sk->sk_gso_max_size would be much bigger than device limits. Call Trace: tcp_write_xmit tso_segs = tcp_init_tso_segs(skb, mss_now); tcp_set_skb_tso_segs tcp_skb_pcount_set // skb->len = 524288, mss_now = 8 // u16 tso_segs = 524288/8 = 65535 -> 0 tso_segs = DIV_ROUND_UP(skb->len, mss_now) BUG_ON(!tso_segs) Add check for the minimum value of gso_max_size and gso_ipv4_max_size.

In the Linux kernel, the following vulnerability has been resolved: sched/core: Disable page allocation in task_tick_mm_cid() With KASAN and PREEMPT_RT enabled, calling task_work_add() in task_tick_mm_cid() may cause the following splat. [ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe [ 63.696416] preempt_count: 10001, expected: 0 [ 63.696416] RCU nest depth: 1, expected: 1 This problem is caused by the following call trace. sched_tick() [ acquire rq->__lock ] -> task_tick_mm_cid() -> task_work_add() -> __kasan_record_aux_stack() -> kasan_save_stack() -> stack_depot_save_flags() -> alloc_pages_mpol_noprof() -> __alloc_pages_noprof() -> get_page_from_freelist() -> rmqueue() -> rmqueue_pcplist() -> __rmqueue_pcplist() -> rmqueue_bulk() -> rt_spin_lock() The rq lock is a raw_spinlock_t. We can't sleep while holding it. IOW, we can't call alloc_pages() in stack_depot_save_flags(). The task_tick_mm_cid() function with its task_work_add() call was introduced by commit 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid") in v6.4 kernel. Fortunately, there is a kasan_record_aux_stack_noalloc() variant that calls stack_depot_save_flags() while not allowing it to allocate new pages. To allow task_tick_mm_cid() to use task_work without page allocation, a new TWAF_NO_ALLOC flag is added to enable calling kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack() if set. The task_tick_mm_cid() function is modified to add this new flag. The possible downside is the missing stack trace in a KASAN report due to new page allocation required when task_work_add_noallloc() is called which should be rare.