Buffer overflow will happen while parsing mp4 clip with corrupted sample atoms values which exceeds MAX_UINT32 range due to lack of validation checks in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, Kamorta, MDM9206, MDM9207C, MDM9607, MSM8905, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996, MSM8996AU, MSM8998, QCA6574AU, QCS405, QCS605, QM215, Rennell, Saipan, SDA660, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDX20, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

A vulnerability was found in FreeFloat FTP Server 1.0 and classified as critical. Affected by this issue is some unknown functionality of the component SEND Command Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. In the RPL-Classic routing protocol implementation in the Contiki-NG operating system, an incoming DODAG Information Option (DIO) control message can contain a prefix information option with a length parameter. The value of the length parameter is not validated, however, and it is possible to cause a buffer overflow when copying the prefix in the set_ip_from_prefix function. This vulnerability affects anyone running a Contiki-NG version prior to 4.7 that can receive RPL DIO messages from external parties. To obtain a patched version, users should upgrade to Contiki-NG 4.7 or later. There are no workarounds for this issue.

ClamAV before 0.97.7 has buffer overflow in the libclamav component

Buffer copy without checking size of input ('Classic Buffer Overflow') vulnerability in cgi component in Synology Audio Station before 6.5.4-3367 allows remote attackers to execute arbitrary commands via unspecified vectors.

A CWE-120: Buffer Copy without Checking Size of Input vulnerability exists that could result in remote code execution or the crash of HTTPs stack which is used for the device Web HMI. Affected Products: Easergy P5 (V01.401.102 and prior)

Buffer overflow vulnerability in CLUSTERPRO X 5.0 for Windows and earlier, EXPRESSCLUSTER X 5.0 for Windows and earlier, CLUSTERPRO X 5.0 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 5.0 SingleServerSafe for Windows and earlier allows a remote unauthenticated attacker to overwrite existing files on the file system and to potentially execute arbitrary code.

A vulnerability classified as critical was found in FreeFloat FTP Server 1.0. Affected by this vulnerability is an unknown functionality of the component CD Command Handler. The manipulation leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A buffer overflow was addressed with improved bounds checking. This issue is fixed in watchOS 8.7, tvOS 15.6, iOS 15.6 and iPadOS 15.6, macOS Monterey 12.5. A remote user may be able to cause kernel code execution.

A vulnerability has been found in FreeFloat FTP Server 1.0 and classified as critical. This vulnerability affects unknown code of the component HASH Command Handler. The manipulation leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

Memory corruption due to buffer copy without checking the size of input in modem while decoding raw SMS received.

The issue was addressed with improved bounds checks. This issue is fixed in iOS 15.7.1 and iPadOS 15.7.1, macOS Ventura 13, iOS 16.1 and iPadOS 16, macOS Monterey 12.6.1, macOS Big Sur 11.7.1. A buffer overflow may result in arbitrary code execution.

A CWE-120: Buffer Copy without Checking Size of Input vulnerability exists that could cause a stack-based buffer overflow, potentially leading to remote code execution when an attacker sends specially crafted alarm data messages. Affected Products: IGSS Data Server - IGSSdataServer.exe (Versions prior to V15.0.0.22170)

A vulnerability in the management interface of MiVoice Business through 9.3 PR1 and MiVoice Business Express through 8.0 SP3 PR3 could allow an unauthenticated attacker (that has network access to the management interface) to conduct a buffer overflow attack due to insufficient validation of URL parameters. A successful exploit could allow arbitrary code execution.

An issue was discovered on certain Nuki Home Solutions devices. The code used to parse the JSON objects received from the WebSocket service provided by the device leads to a stack buffer overflow. An attacker would be able to exploit this to gain arbitrary code execution on a KeyTurner device. This affects Nuki Smart Lock 3.0 before 3.3.5 and 2.0 before 2.12.4, as well as Nuki Bridge v1 before 1.22.0 and v2 before 2.13.2.

A CWE-120: Buffer Copy without Checking Size of Input vulnerability exists that could cause a stack-based buffer overflow, potentially leading to remote code execution when an attacker sends specially crafted log data request messages. Affected Products: IGSS Data Server - IGSSdataServer.exe (Versions prior to V15.0.0.22170)

An issue was discovered on certain DrayTek Vigor routers before July 2022 such as the Vigor3910 before 4.3.1.1. /cgi-bin/wlogin.cgi has a buffer overflow via the username or password to the aa or ab field.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetEnableWizard.

A CWE-120: Buffer Copy without Checking Size of Input vulnerability exists that could cause a stack-based buffer overflow, potentially leading to remote code execution when an attacker sends specially crafted online data request messages. Affected Products: IGSS Data Server - IGSSdataServer.exe (Versions prior to V15.0.0.22170)

PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. In versions prior to and including 2.12.1 a stack buffer overflow vulnerability affects PJSIP users that use STUN in their applications, either by: setting a STUN server in their account/media config in PJSUA/PJSUA2 level, or directly using `pjlib-util/stun_simple` API. A patch is available in commit 450baca which should be included in the next release. There are no known workarounds for this issue.

Tenda F1203 V2.0.1.6 was discovered to contain a buffer overflow via the page parameter at /goform/VirtualSer.

An issue was discovered in Infiray IRAY-A8Z3 1.0.957. The firmware contains a potential buffer overflow by calling strcpy() without checking the string length beforehand.

Azure RTOS USBX is a USB host, device, and on-the-go (OTG) embedded stack. In versions prior to 6.1.10, an attacker can cause a buffer overflow by providing the Azure RTOS USBX host stack a HUB descriptor with `bNbPorts` set to a value greater than `UX_MAX_TT` which defaults to 8. For a `bNbPorts` value of 255, the implementation of `ux_host_class_hub_descriptor_get` function will modify the contents of `hub` -> `ux_host_class_hub_device` -> `ux_device_hub_tt` array violating the end boundary by 255 - `UX_MAX_TT` items. The USB host stack needs to validate the number of ports reported by the hub, and if the value is larger than UX_MAX_TT, USB stack needs to reject the request. This fix has been included in USBX release 6.1.10.

Tenda TX9 Pro 22.03.02.10 devices have a SetNetControlList buffer overflow.

A buffer overflow vulnerability exists in the razerkbd driver of OpenRazer up to version v3.3.0 allows attackers to cause a Denial of Service (DoS) and possibly escalate their privileges via a crafted buffer sent to the matrix_custom_frame device.

Multiple buffer overflows in Eudora Worldmail, possibly Worldmail 3 version 6.1.22.0, have unknown impact and attack vectors, as demonstrated by the (1) "Eudora WorldMail stack overflow" and (2) "Eudora WorldMail heap overflow" modules in VulnDisco Pack. NOTE: Some of these details are obtained from third party information. As of 20061118, this disclosure has no actionable information. However, because the VulnDisco Pack author is a reliable researcher, the issue is being assigned a CVE identifier for tracking purposes.

Prime95 30.7 build 9 suffers from a Buffer Overflow vulnerability that could lead to Remote Code Execution.

A buffer overflow vulnerability exists in the razermouse driver of OpenRazer up to version v3.3.0 allows attackers to cause a Denial of Service (DoS) and possibly escalate their privileges via a crafted buffer sent to the matrix_custom_frame device.

There is a buffer overflow vulnerability in CV81-WDM FW 01.70.49.29.46. Successful exploitation of this vulnerability may lead to privilege escalation.

A vulnerability, which was classified as critical, was found in Netgear EX6200 1.0.3.94. Affected is the function sub_41940. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been classified as critical. Affected is the function sub_4238E8. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A buffer overflow vulnerability in the library of the web server in Zyxel NR7101 firmware prior to V1.15(ACCC.3)C0, which could allow an unauthenticated attacker to execute some OS commands or to cause denial-of-service (DoS) conditions on a vulnerable device.

A buffer overflow vulnerability exists in the razeraccessory driver of OpenRazer up to version v3.3.0 allows attackers to cause a Denial of Service (DoS) and possibly escalate their privileges via a crafted buffer sent to the matrix_custom_frame device.

Certain HP Print Products are potentially vulnerable to Buffer Overflow.

ALLMediaServer 1.6 is vulnerable to Buffer Overflow via MediaServer.exe.

Matthias-Wandel/jhead jhead 3.06 is vulnerable to Buffer Overflow via shellescape(), jhead.c, jhead. jhead copies strings to a stack buffer when it detects a &i or &o. However, jhead does not check the boundary of the stack buffer. As a result, there will be a stack buffer overflow problem when multiple `&i` or `&o` are given.

Memory corruption while handling payloads from remote ESL.

Rocket Software UniData versions prior to 8.2.4 build 3003 and UniVerse versions prior to 11.3.5 build 1001 or 12.2.1 build 2002 suffer from a stack-based buffer overflow that can lead to remote code execution as the root user.

Contiki-NG is an open-source, cross-platform operating system for internet of things (IoT) devices. In versions 4.8 and prior, an out-of-bounds write can occur in the BLE L2CAP module of the Contiki-NG operating system. The network stack of Contiki-NG uses a global buffer (packetbuf) for processing of packets, with the size of PACKETBUF_SIZE. In particular, when using the BLE L2CAP module with the default configuration, the PACKETBUF_SIZE value becomes larger then the actual size of the packetbuf. When large packets are processed by the L2CAP module, a buffer overflow can therefore occur when copying the packet data to the packetbuf. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be worked around by applying the patch manually.

RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. A vulnerability was discovered in the IPv6 fragmentation reassembly implementation of RIOT OS v2025.07. When copying the contents of the first fragment (offset=0) into the reassembly buffer, no size check is performed. It is possible to force the creation of a small reassembly buffer by first sending a shorter fragment (also with offset=0). Overflowing the reassembly buffer corrupts the state of other packet buffers which an attacker might be able to used to achieve further memory corruption (potentially resulting in remote code execution). To trigger the vulnerability, the `gnrc_ipv6_ext_frag` module must be included and the attacker must be able to send arbitrary IPv6 packets to the victim. Version 2025.10 fixes the issue.

Tenda V15V1.0 V15.11.0.14(1521_3190_1058) was discovered to contain a buffer overflow vulnerability via the DNSDomainName parameter in the formModifyDnsForward function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda V15V1.0 V15.11.0.14(1521_3190_1058) was discovered to contain a buffer overflow vulnerability via the wifiFilterListRemark parameter in the modifyWifiFilterRules function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

gnuplot v5.5 was discovered to contain a buffer overflow via the function plotrequest().

Buffer Overflow vulnerability in Saltstack v.3003 and before allows attacker to execute arbitrary code via the func variable in salt/salt/modules/status.py file. NOTE: this is disputed by third parties because an attacker cannot influence the eval input

Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.

A vulnerability has been identified in RUGGEDCOM i800 (All versions < V4.3.7), RUGGEDCOM i801 (All versions < V4.3.7), RUGGEDCOM i802 (All versions < V4.3.7), RUGGEDCOM i803 (All versions < V4.3.7), RUGGEDCOM M2100 (All versions < V4.3.7), RUGGEDCOM M2200 (All versions < V4.3.7), RUGGEDCOM M969 (All versions < V4.3.7), RUGGEDCOM RMC30 (All versions < V4.3.7), RUGGEDCOM RMC8388 V4.X (All versions < V4.3.7), RUGGEDCOM RMC8388 V5.X (All versions < V5.5.4), RUGGEDCOM RP110 (All versions < V4.3.7), RUGGEDCOM RS1600 (All versions < V4.3.7), RUGGEDCOM RS1600F (All versions < V4.3.7), RUGGEDCOM RS1600T (All versions < V4.3.7), RUGGEDCOM RS400 (All versions < V4.3.7), RUGGEDCOM RS401 (All versions < V4.3.7), RUGGEDCOM RS416 (All versions < V4.3.7), RUGGEDCOM RS416P (All versions < V4.3.7), RUGGEDCOM RS416Pv2 V4.X (All versions < V4.3.7), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.5.4), RUGGEDCOM RS416v2 V4.X (All versions < V4.3.7), RUGGEDCOM RS416v2 V5.X (All versions < 5.5.4), RUGGEDCOM RS8000 (All versions < V4.3.7), RUGGEDCOM RS8000A (All versions < V4.3.7), RUGGEDCOM RS8000H (All versions < V4.3.7), RUGGEDCOM RS8000T (All versions < V4.3.7), RUGGEDCOM RS900 (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RS900G (All versions < V4.3.7), RUGGEDCOM RS900G (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RS900GP (All versions < V4.3.7), RUGGEDCOM RS900L (All versions < V4.3.7), RUGGEDCOM RS900W (All versions < V4.3.7), RUGGEDCOM RS910 (All versions < V4.3.7), RUGGEDCOM RS910L (All versions < V4.3.7), RUGGEDCOM RS910W (All versions < V4.3.7), RUGGEDCOM RS920L (All versions < V4.3.7), RUGGEDCOM RS920W (All versions < V4.3.7), RUGGEDCOM RS930L (All versions < V4.3.7), RUGGEDCOM RS930W (All versions < V4.3.7), RUGGEDCOM RS940G (All versions < V4.3.7), RUGGEDCOM RS969 (All versions < V4.3.7), RUGGEDCOM RSG2100 (All versions < V4.3.7), RUGGEDCOM RSG2100 (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RSG2100P (All versions < V4.3.7), RUGGEDCOM RSG2100P (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RSG2200 (All versions < V4.3.7), RUGGEDCOM RSG2288 V4.X (All versions < V4.3.7), RUGGEDCOM RSG2288 V5.X (All versions < V5.5.4), RUGGEDCOM RSG2300 V4.X (All versions < V4.3.7), RUGGEDCOM RSG2300 V5.X (All versions < V5.5.4), RUGGEDCOM RSG2300P V4.X (All versions < V4.3.7), RUGGEDCOM RSG2300P V5.X (All versions < V5.5.4), RUGGEDCOM RSG2488 V4.X (All versions < V4.3.7), RUGGEDCOM RSG2488 V5.X (All versions < V5.5.4), RUGGEDCOM RSG907R (All versions < V5.5.4), RUGGEDCOM RSG908C (All versions < V5.5.4), RUGGEDCOM RSG909R (All versions < V5.5.4), RUGGEDCOM RSG910C (All versions < V5.5.4), RUGGEDCOM RSG920P V4.X (All versions < V4.3.7), RUGGEDCOM RSG920P V5.X (All versions < V5.5.4), RUGGEDCOM RSL910 (All versions < V5.5.4), RUGGEDCOM RST2228 (All versions < V5.5.4), RUGGEDCOM RST2228P (All versions < V5.5.4), RUGGEDCOM RST916C (All versions < V5.5.4), RUGGEDCOM RST916P (All versions < V5.5.4). The DHCP client in affected devices fails to properly sanitize incoming DHCP packets. This could allow an unauthenticated remote attacker to cause memory to be overwritten, potentially allowing remote code execution.