Envoy is a cloud-native, open source edge and service proxy. Envoy exposed an out-of-memory (OOM) vector from the mirror response, since async HTTP client will buffer the response with an unbounded buffer.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the Lua filter is vulnerable to denial of service. Attackers can send large request bodies for routes that have Lua filter enabled and trigger crashes. As of versions versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy no longer invokes the Lua coroutine if the filter has been reset. As a workaround for those whose Lua filter is buffering all requests/ responses, mitigate by using the buffer filter to avoid triggering the local reply in the Lua filter.

Envoy is an open source edge and service proxy, designed for cloud-native applications. When a cluster is deleted via Cluster Discovery Service (CDS) all idle connections established to endpoints in that cluster are disconnected. A recursion was introduced in the procedure of disconnecting idle connections that can lead to stack exhaustion and abnormal process termination when a cluster has a large number of idle connections. This infinite recursion causes Envoy to crash. Users are advised to upgrade.

Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy will crash when the http async client is handling `sendLocalReply` under some circumstance, e.g., websocket upgrade, and requests mirroring. The http async client will crash during the `sendLocalReply()` in http async client, one reason is http async client is duplicating the status code, another one is the destroy of router is called at the destructor of the async stream, while the stream is deferred deleted at first. There will be problems that the stream decoder is destroyed but its reference is called in `router.onDestroy()`, causing segment fault. This will impact ext_authz if the `upgrade` and `connection` header are allowed, and request mirrorring. This issue has been addressed in versions 1.31.2, 1.30.6, 1.29.9, and 1.28.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Envoy is an open source edge and service proxy, designed for cloud-native applications. Sending a locally generated response must stop further processing of request or response data. Envoy tracks the amount of buffered request and response data and aborts the request if the amount of buffered data is over the limit by sending 413 or 500 responses. However when the buffer overflows while response is processed by the filter chain the operation may not be aborted correctly and result in accessing a freed memory block. If this happens Envoy will crash resulting in a denial of service.

Envoy is an open source edge and service proxy, designed for cloud-native applications. In affected versions of Envoy a crash occurs when configured for :ref:`upstream tunneling <envoy_v3_api_field_extensions.filters.network.tcp_proxy.v3.TcpProxy.tunneling_config>` and the downstream connection disconnects while the the upstream connection or http/2 stream is still being established. There are no workarounds for this issue. Users are advised to upgrade.

Envoy is a cloud-native, open source edge and service proxy. Prior to versions 1.30.4, 1.29.7, 1.28.5, and 1.27.7. Envoy references already freed memory when route hash policy is configured with cookie attributes. Note that this vulnerability has been fixed in the open as the effect would be immediately apparent if it was configured. Memory allocated for holding attribute values is freed after configuration was parsed. During request processing Envoy will attempt to copy content of de-allocated memory into request cookie header. This can lead to arbitrary content of Envoy's memory to be sent to the upstream service or abnormal process termination. This vulnerability is fixed in Envoy versions v1.30.4, v1.29.7, v1.28.5, and v1.27.7. As a workaround, do not use cookie attributes in route action hash policy.

Envoy is a cloud-native, open source edge and service proxy. There is a use-after-free in `HttpConnectionManager` (HCM) with `EnvoyQuicServerStream` that can crash Envoy. An attacker can exploit this vulnerability by sending a request without `FIN`, then a `RESET_STREAM` frame, and then after receiving the response, closing the connection.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, the CORS filter will segfault and crash Envoy when the `origin` header is removed and deleted between `decodeHeaders`and `encodeHeaders`. Versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12 have a fix for this issue. As a workaround, do not remove the `origin` header in the Envoy configuration.

Envoy is a cloud-native, open source edge and service proxy. A crash was observed in `EnvoyQuicServerStream::OnInitialHeadersComplete()` with following call stack. It is a use-after-free caused by QUICHE continuing push request headers after `StopReading()` being called on the stream. As after `StopReading()`, the HCM's `ActiveStream` might have already be destroyed and any up calls from QUICHE could potentially cause use after free.

Envoy is a high-performance edge/middle/service proxy. Envoy will crash when certain timeouts happen within the same interval. The crash occurs when the following are true: 1. hedge_on_per_try_timeout is enabled, 2. per_try_idle_timeout is enabled (it can only be done in configuration), 3. per-try-timeout is enabled, either through headers or configuration and its value is equal, or within the backoff interval of the per_try_idle_timeout. This issue has been addressed in released 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 the OAuth filter would try to invoke the remaining filters in the chain after emitting a local response, which triggers an ASSERT() in newer versions and corrupts memory on earlier versions. continueDecoding() shouldn’t ever be called from filters after a local reply has been sent. Users are advised to upgrade. There are no known workarounds for this issue.

Envoy is a cloud-native high-performance edge/middle/service proxy. In versions prior to 1.22.1 if Envoy attempts to send an internal redirect of an HTTP request consisting of more than HTTP headers, there’s a lifetime bug which can be triggered. If while replaying the request Envoy sends a local reply when the redirect headers are processed, the downstream state indicates that the downstream stream is not complete. On sending the local reply, Envoy will attempt to reset the upstream stream, but as it is actually complete, and deleted, this result in a use-after-free. Users are advised to upgrade. Users unable to upgrade are advised to disable internal redirects if crashes are observed.

Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions after Envoy sends a locally generated response it must stop further processing of request or response data. However when local response is generated due the internal buffer overflow while request or response is processed by the filter chain the operation may not be stopped completely and result in accessing a freed memory block. A specifically constructed request delivered by an untrusted downstream or upstream peer in the presence of extensions that modify and increase the size of request or response bodies resulting in a Denial of Service when using extensions that modify and increase the size of request or response bodies, such as decompressor filter. Envoy versions 1.19.1, 1.18.4, 1.17.4, 1.16.5 contain fixes to address incomplete termination of request processing after locally generated response. As a workaround disable Envoy's decompressor, json-transcoder or grpc-web extensions or proprietary extensions that modify and increase the size of request or response bodies, if feasible.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. This vulnerability is due to improper control of a resource. An attacker with the ability to spoof a trusted IKEv2 site-to-site VPN peer and in possession of valid IKEv2 credentials for that peer could exploit this vulnerability by sending malformed, authenticated IKEv2 messages to an affected device. A successful exploit could allow the attacker to trigger a reload of the device.

Transient DOS while parsing fragments of MBSSID IE from beacon frame.

Use after free in some Zoom Workplace Apps and SDKs may allow an authenticated user to conduct a denial of service via network access.

nanomq 0.21.2 contains a Use-After-Free vulnerability in /nanomq/nng/src/core/socket.c.

Use-after-free vulnerability in kadmin/server/server_stubs.c in kadmind in MIT Kerberos 5 (aka krb5) 1.5 through 1.6.3 allows remote authenticated users to cause a denial of service (daemon crash) via a request from a kadmin client that sends an invalid API version number.

IBM MQ Operator LTS 2.0.0 through 2.0.29, MQ Operator CD 3.0.0, 3.0.1, 3.1.0 through 3.1.3, 3.3.0, 3.4.0, 3.4.1, 3.5.0, 3.5.1, and MQ Operator SC2 3.2.0 through 3.2.10  Client connecting to a MQ Queue Manager can cause a SIGSEGV in the AMQRMPPA channel process terminating it.

An issue was discovered in InspIRCd 3 before 3.1.0. The silence module contains a use after free vulnerability. This vulnerability can be used for remote crashing of an InspIRCd server by any user able to fully connect to a server.

A user authorized to perform database queries may trigger denial of service by issuing specially crafted queries, which use $lookup and collations. This issue affects MongoDB Server v4.2 versions prior to 4.2.1; MongoDB Server v4.0 versions prior to 4.0.13 and MongoDB Server v3.6 versions prior to 3.6.15.

There is a use-after-free issue in all samba 4.9.x versions before 4.9.18, all samba 4.10.x versions before 4.10.12 and all samba 4.11.x versions before 4.11.5, essentially due to a call to realloc() while other local variables still point at the original buffer.

A use-after-free flaw was found in setup_async_work in the KSMBD implementation of the in-kernel samba server and CIFS in the Linux kernel. This issue could allow an attacker to crash the system by accessing freed work.

Samba from version 4.3.0 and before versions 4.7.12, 4.8.7 and 4.9.3 are vulnerable to a denial of service. When configured to accept smart-card authentication, Samba's KDC will call talloc_free() twice on the same memory if the principal in a validly signed certificate does not match the principal in the AS-REQ. This is only possible after authentication with a trusted certificate. talloc is robust against further corruption from a double-free with talloc_free() and directly calls abort(), terminating the KDC process.

A use-after-free in res_pjsip_pubsub.c in Sangoma Asterisk 16.28, 18.14, 19.6, and certified/18.9-cert2 may allow a remote authenticated attacker to crash Asterisk (denial of service) by performing activity on a subscription via a reliable transport at the same time that Asterisk is also performing activity on that subscription.

An IBM MQ 9.3 and 9.4 Client connecting to an MQ Queue Manager can cause a SIGSEGV in the AMQRMPPA channel process terminating it.

Tensorflow is an Open Source Machine Learning Framework. A malicious user can cause a use after free behavior when decoding PNG images. After `png::CommonFreeDecode(&decode)` gets called, the values of `decode.width` and `decode.height` are in an unspecified state. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.

An issue was discovered in InspIRCd 2 before 2.0.29 and 3 before 3.6.0. The pgsql module contains a use after free vulnerability. When combined with the sqlauth or sqloper modules, this vulnerability can be used for remote crashing of an InspIRCd server by any user able to connect to a server.

ComponentInstaller Modification in ComponentInstaller in Google ChromeOS 15823.23.0 on Chromebooks allows enrolled users with local access to unenroll devices and intercept device management requests via loading components from the unencrypted stateful partition.

A NULL pointer dereference, or possible use-after-free flaw was found in Samba AD LDAP server in versions before 4.10.17, before 4.11.11 and before 4.12.4. Although some versions of Samba shipped with Red Hat Enterprise Linux do not support Samba in AD mode, the affected code is shipped with the libldb package. This flaw allows an authenticated user to possibly trigger a use-after-free or NULL pointer dereference. The highest threat from this vulnerability is to system availability.

A use-after-free flaw was found in all samba LDAP server versions before 4.10.17, before 4.11.11, before 4.12.4 used in a AC DC configuration. A Samba LDAP user could use this flaw to crash samba.

A use-after-free flaw was found in smb2_is_status_io_timeout() in CIFS in the Linux Kernel. After CIFS transfers response data to a system call, there are still local variable points to the memory region, and if the system call frees it faster than CIFS uses it, CIFS will access a free memory region, leading to a denial of service.

A use-after-free flaw was found in libvirt. The qemuMonitorUnregister() function in qemuProcessHandleMonitorEOF is called using multiple threads without being adequately protected by a monitor lock. This flaw could be triggered by the virConnectGetAllDomainStats API when the guest is shutting down. An unprivileged client with a read-only connection could use this flaw to perform a denial of service attack by causing the libvirt daemon to crash.