Impact Cloudflare quiche was discovered to be vulnerable to incorrect congestion window growth, which could cause it to send data at a rate faster than the path might actually support. An unauthenticated remote attacker can exploit the vulnerability by first completing a handshake and initiating a congestion-controlled data transfer towards itself. Then, it could manipulate the victim's congestion control state by sending ACK frames covering a large range of packet numbers (including packet numbers that had never been sent); see RFC 9000 Section 19.3. The victim could grow the congestion window beyond typical expectations and allow more bytes in flight than the path might really support. In extreme cases, the window might grow beyond the limit of the internal variable's type, leading to an overflow panic. Patches quiche 0.24.4 is the earliest version containing the fix for this issue.

Allocation of Resources Without Limits or Throttling vulnerability in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.7, from 10.1.0-M1 through 10.1.41, from 9.0.0.M1 through 9.0.105. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected. Users are recommended to upgrade to version 11.0.8, 10.1.42 or 9.0.106, which fix the issue.

Pion Interceptor is a framework for building RTP/RTCP communication software. Versions v0.1.36 through v0.1.38 contain a bug in a RTP packet factory that can be exploited to trigger a panic with Pion based SFU via crafted RTP packets, This only affect users that use pion/interceptor. Users should upgrade to v0.1.39 or later, which validates that: `padLen > 0 && padLen <= payloadLength` and return error on overflow, avoiding panic. If upgrading is not possible, apply the patch from the pull request manually or drop packets whose P-bit is set but whose padLen is zero or larger than the remaining payload.

User-controlled operations could have allowed Denial of Service in M-Files Server before 23.4.12528.1 due to uncontrolled memory consumption.

A vulnerability in the HTTP/HTTPS service used by J-Web, Web Authentication, Dynamic-VPN (DVPN), Firewall Authentication Pass-Through with Web-Redirect, and Captive Portal allows an unauthenticated attacker to cause an extended Denial of Service (DoS) for these services by sending a high number of specific requests. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S17 on EX Series; 12.3X48 versions prior to 12.3X48-D105 on SRX Series; 15.1 versions prior to 15.1R7-S8; 15.1X49 versions prior to 15.1X49-D230 on SRX Series; 16.1 versions prior to 16.1R7-S8; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2; 20.2 versions prior to 20.2R1-S1, 20.2R2.

Apache Traffic Server 6.0.0 to 6.2.3, 7.0.0 to 7.1.10, and 8.0.0 to 8.0.7 is vulnerable to certain types of HTTP/2 HEADERS frames that can cause the server to allocate a large amount of memory and spin the thread.

CNCF Envoy through 1.13.0 may consume excessive amounts of memory when proxying HTTP/1.1 requests or responses with many small (i.e. 1 byte) chunks.

HashiCorp Consul and Consul Enterprise up to 1.6.2 HTTP/RPC services allowed unbounded resource usage, and were susceptible to unauthenticated denial of service. Fixed in 1.6.3.

CiphertextHeader.java in Cryptacular 1.2.3, as used in Apereo CAS and other products, allows attackers to trigger excessive memory allocation during a decode operation, because the nonce array length associated with "new byte" may depend on untrusted input within the header of encoded data.

Allocation of resources for multipart headers with insufficient limits enabled a DoS vulnerability in Apache Commons FileUpload. This issue affects Apache Commons FileUpload: from 1.0 before 1.6; from 2.0.0-M1 before 2.0.0-M4. Users are recommended to upgrade to versions 1.6 or 2.0.0-M4, which fix the issue.

CoreDNS is a DNS server that chains plugins. In versions prior to 1.12.2, a Denial of Service (DoS) vulnerability exists in the CoreDNS DNS-over-QUIC (DoQ) server implementation. The server previously created a new goroutine for every incoming QUIC stream without imposing any limits on the number of concurrent streams or goroutines. A remote, unauthenticated attacker could open a large number of streams, leading to uncontrolled memory consumption and eventually causing an Out Of Memory (OOM) crash — especially in containerized or memory-constrained environments. The patch in version 1.12.2 introduces two key mitigation mechanisms: `max_streams`, which caps the number of concurrent QUIC streams per connection with a default value of `256`; and `worker_pool_size`, which Introduces a server-wide, bounded worker pool to process incoming streams with a default value of `1024`. This eliminates the 1:1 stream-to-goroutine model and ensures that CoreDNS remains resilient under high concurrency. Some workarounds are available for those who are unable to upgrade. Disable QUIC support by removing or commenting out the `quic://` block in the Corefile, use container runtime resource limits to detect and isolate excessive memory usage, and/or monitor QUIC connection patterns and alert on anomalies.

In Eclipse Jetty version 9.3.x and 9.4.x, the server is vulnerable to Denial of Service conditions if a remote client sends either large SETTINGs frames container containing many settings, or many small SETTINGs frames. The vulnerability is due to the additional CPU and memory allocations required to handle changed settings.

@fastify/multipart is a Fastify plugin to parse the multipart content-type. Prior to versions 7.4.1 and 6.0.1, @fastify/multipart may experience denial of service due to a number of situations in which an unlimited number of parts are accepted. This includes the multipart body parser accepting an unlimited number of file parts, the multipart body parser accepting an unlimited number of field parts, and the multipart body parser accepting an unlimited number of empty parts as field parts. This is fixed in v7.4.1 (for Fastify v4.x) and v6.0.1 (for Fastify v3.x). There are no known workarounds.

Rack is a modular Ruby web server interface. Prior to versions 2.2.14, 3.0.16, and 3.1.14, `Rack::QueryParser` parses query strings and `application/x-www-form-urlencoded` bodies into Ruby data structures without imposing any limit on the number of parameters, allowing attackers to send requests with extremely large numbers of parameters. The vulnerability arises because `Rack::QueryParser` iterates over each `&`-separated key-value pair and adds it to a Hash without enforcing an upper bound on the total number of parameters. This allows an attacker to send a single request containing hundreds of thousands (or more) of parameters, which consumes excessive memory and CPU during parsing. An attacker can trigger denial of service by sending specifically crafted HTTP requests, which can cause memory exhaustion or pin CPU resources, stalling or crashing the Rack server. This results in full service disruption until the affected worker is restarted. Versions 2.2.14, 3.0.16, and 3.1.14 fix the issue. Some other mitigations are available. One may use middleware to enforce a maximum query string size or parameter count, or employ a reverse proxy (such as Nginx) to limit request sizes and reject oversized query strings or bodies. Limiting request body sizes and query string lengths at the web server or CDN level is an effective mitigation.

Unsanitized input in the query parser in github.com/revel/revel before v1.0.0 allows remote attackers to cause resource exhaustion via memory allocation.

Boxo, formerly known as go-libipfs, is a library for building IPFS applications and implementations. In versions 0.4.0 and 0.5.0, if an attacker is able allocate arbitrary many bytes in the Bitswap server, those allocations are lasting even if the connection is closed. This affects users accepting untrusted connections with the Bitswap server and also affects users using the old API stubs at `github.com/ipfs/go-libipfs/bitswap` because users then transitively import `github.com/ipfs/go-libipfs/bitswap/server`. Boxo versions 0.6.0 and 0.4.1 contain a patch for this issue. As a workaround, those who are using the stub object at `github.com/ipfs/go-libipfs/bitswap` not taking advantage of the features provided by the server can refactor their code to use the new split API that will allow them to run in a client only mode: `github.com/ipfs/go-libipfs/bitswap/client`.

An issue was discovered in the ws crate through 2020-09-25 for Rust. The outgoing buffer is not properly limited, leading to a remote memory-consumption attack.

socket.io-parser before 3.4.1 allows attackers to cause a denial of service (memory consumption) via a large packet because a concatenation approach is used.

A regression was introduced in the Red Hat build of python-eventlet due to a change in the patch application strategy, resulting in a patch for CVE-2021-21419 not being applied for all builds of all products.

A vulnerability in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust process memory of an affected device. The vulnerability is due to insufficient queue management for Internet Group Management Protocol (IGMP) packets. An attacker could exploit this vulnerability by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to cause memory exhaustion, resulting in instability of other processes. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address this vulnerability.

Pure-FTPd 1.0.48 allows remote attackers to prevent legitimate server use by making enough connections to exceed the connection limit.

Multiple vulnerabilities in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to either immediately crash the Internet Group Management Protocol (IGMP) process or make it consume available memory and eventually crash. The memory consumption may negatively impact other processes that are running on the device. These vulnerabilities are due to the incorrect handling of IGMP packets. An attacker could exploit these vulnerabilities by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to immediately crash the IGMP process or cause memory exhaustion, resulting in other processes becoming unstable. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address these vulnerabilities.

This affects the package com.fasterxml.jackson.dataformat:jackson-dataformat-cbor from 0 and before 2.11.4, from 2.12.0-rc1 and before 2.12.1. Unchecked allocation of byte buffer can cause a java.lang.OutOfMemoryError exception.

In Netgear RAX30 V1.0.10.94_3, the USERLIMIT_GLOBAL option is set to 0 in multiple bftpd-related configuration files. This can cause DoS attacks when unlimited users are connected.

An issue was discovered in Xen XAPI before 2020-12-15. Certain xenstore keys provide feedback from the guest, and are therefore watched by toolstack. Specifically, keys are watched by xenopsd, and data are forwarded via RPC through message-switch to xapi. The watching logic in xenopsd sends one RPC update containing all data, any time any single xenstore key is updated, and therefore has O(N^2) time complexity. Furthermore, message-switch retains recent (currently 128) RPC messages for diagnostic purposes, yielding O(M*N) space complexity. The quantity of memory a single guest can monopolise is bounded by xenstored quota, but the quota is fairly large. It is believed to be in excess of 1G per malicious guest. In practice, this manifests as a host denial of service, either through message-switch thrashing against swap, or OOMing entirely, depending on dom0's configuration. (There are no quotas in xenopsd to limit the quantity of keys that result in RPC traffic.) A buggy or malicious guest can cause unreasonable memory usage in dom0, resulting in a host denial of service. All versions of XAPI are vulnerable. Systems that are not using the XAPI toolstack are not vulnerable.

In vm-superio before 0.1.1, the serial console FIFO can grow to unlimited memory usage when data is sent to the input source (i.e., standard input). This behavior cannot be reproduced from the guest side. When no rate limiting is in place, the host can be subject to memory pressure, impacting all other VMs running on the same host.

Mattermost fails to enforce a limit for the size of the cache entry for OpenGraph data allowing an attacker to send a specially crafted request to the /api/v4/opengraph filling the cache and turning the server unavailable.

Shibboleth Identify Provider 3.x before 3.4.6 has a denial of service flaw. A remote unauthenticated attacker can cause a login flow to trigger Java heap exhaustion due to the creation of objects in the Java Servlet container session.

Allocation of Resources Without Limits or Throttling vulnerability in Drupal Events Log Track allows Excessive Allocation.This issue affects Events Log Track: from 0.0.0 before 3.1.11, from 4.0.0 before 4.0.2.

An issue was discovered in GitLab Community and Enterprise Edition before 11.1.7, 11.2.x before 11.2.4, and 11.3.x before 11.3.1. The diff formatter using rouge can block for a long time in Sidekiq jobs without any timeout.

A flaw was found in the way NSS handled CCS (ChangeCipherSpec) messages in TLS 1.3. This flaw allows a remote attacker to send multiple CCS messages, causing a denial of service for servers compiled with the NSS library. The highest threat from this vulnerability is to system availability. This flaw affects NSS versions before 3.58.

In Apache HTTP Server 2.4.53 and earlier, a malicious request to a lua script that calls r:parsebody(0) may cause a denial of service due to no default limit on possible input size.

In Wireshark 3.2.0 to 3.2.7, the GQUIC dissector could crash. This was addressed in epan/dissectors/packet-gquic.c by correcting the implementation of offset advancement.

Grackle is a GraphQL server written in functional Scala, built on the Typelevel stack. The GraphQL specification requires that GraphQL fragments must not form cycles, either directly or indirectly. Prior to Grackle version 0.18.0, that requirement wasn't checked, and queries with cyclic fragments would have been accepted for type checking and compilation. The attempted compilation of such fragments would result in a JVM `StackOverflowError` being thrown. Some knowledge of an applications GraphQL schema would be required to construct such a query, however no knowledge of any application-specific performance or other behavioural characteristics would be needed. Grackle uses the cats-parse library for parsing GraphQL queries. Prior to version 0.18.0, Grackle made use of the cats-parse `recursive` operator. However, `recursive` is not currently stack safe. `recursive` was used in three places in the parser: nested selection sets, nested input values (lists and objects), and nested list type declarations. Consequently, queries with deeply nested selection sets, input values or list types could be constructed which exploited this, causing a JVM `StackOverflowException` to be thrown during parsing. Because this happens very early in query processing, no specific knowledge of an applications GraphQL schema would be required to construct such a query. The possibility of small queries resulting in stack overflow is a potential denial of service vulnerability. This potentially affects all applications using Grackle which have untrusted users. Both stack overflow issues have been resolved in the v0.18.0 release of Grackle. As a workaround, users could interpose a sanitizing layer in between untrusted input and Grackle query processing.

The AP4_CttsAtom class in Core/Ap4CttsAtom.cpp in Bento4 1.5.1.0 allows remote attackers to cause a denial of service (application crash), related to a memory allocation failure, as demonstrated by mp2aac.

A vulnerability in the egress packet processing functionality of the Cisco StarOS operating system for Cisco Aggregation Services Router (ASR) 5700 Series devices and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to cause an interface on the device to cease forwarding packets. The device may need to be manually reloaded to clear this Interface Forwarding Denial of Service condition. The vulnerability is due to the failure to properly check that the length of a packet to transmit does not exceed the maximum supported length of the network interface card (NIC). An attacker could exploit this vulnerability by sending a crafted IP packet or a series of crafted IP fragments through an interface on the targeted device. A successful exploit could allow the attacker to cause the network interface to cease forwarding packets. This vulnerability could be triggered by either IPv4 or IPv6 network traffic. This vulnerability affects the following Cisco products when they are running the StarOS operating system and a virtual interface card is installed on the device: Aggregation Services Router (ASR) 5700 Series, Virtualized Packet Core-Distributed Instance (VPC-DI) System Software, Virtualized Packet Core-Single Instance (VPC-SI) System Software. Cisco Bug IDs: CSCvf32385.

A Denial-of-Service (DoS) vulnerability was discovered in F-Secure Atlant whereby the fsicapd component used in certain F-Secure products while scanning larger packages/fuzzed files consume too much memory eventually can crash the scanning engine. The exploit can be triggered remotely by an attacker.

An unauthenticated specially crafted packet sent by an attacker over the network will cause a denial-of-service (DoS) vulnerability. Vulnerability allows attacker to stop the PLC. After stopping (ERR LED flashing red), physical access to the PLC is required in order to restart the application. This issue affects: ABB AC500 V2 products with onboard Ethernet version 2.8.4 and prior versions.

h2o is an HTTP server with support for HTTP/1.x, HTTP/2 and HTTP/3. The QUIC stack (quicly), as used by H2O up to commit 43f86e5 (in version 2.3.0-beta and prior), is susceptible to a state exhaustion attack. When H2O is serving HTTP/3, a remote attacker can exploit this vulnerability to progressively increase the memory retained by the QUIC stack. This can eventually cause H2O to abort due to memory exhaustion. The vulnerability has been resolved in commit d67e81d03be12a9d53dc8271af6530f40164cd35. HTTP/1 and HTTP/2 are not affected by this vulnerability as they do not use QUIC. Administrators looking to mitigate this issue without upgrading can disable HTTP/3 support.

When a BIG-IP HTTP/2 httprouter profile is configured on a virtual server, undisclosed responses can cause an increase in memory resource utilization.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Etherpad < 1.8.3 is affected by a missing lock check which could cause a denial of service. Aggressively targeting random pad import endpoints with empty data would flatten all pads due to lack of rate limiting and missing ownership check.

IBM WebSphere Application Server Liberty 18.0.0.2 through 25.0.0.8 is vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.

Denial of Service in JSON-Java versions up to and including 20230618.  A bug in the parser means that an input string of modest size can lead to indefinite amounts of memory being used.

The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. A vulnerability in Apollo Router allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically due to internal optimizations being frequently bypassed. The query planner includes an optimization that significantly speeds up planning for applicable GraphQL selections. However, queries with deeply nested and reused named fragments can generate many selections where this optimization does not apply, leading to significantly longer planning times. Because the query planner does not enforce a timeout, a small number of such queries can exhaust router's thread pool, rendering it inoperable. This could lead to excessive resource consumption and denial of service. This has been remediated in apollo-router versions 1.61.2 and 2.1.1.

Apollo Gateway provides utilities for combining multiple GraphQL microservices into a single GraphQL endpoint. Prior to 2.10.1, a vulnerability in Apollo Gateway allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically during named fragment expansion. Named fragments were being expanded once per fragment spread during query planning, leading to exponential resource usage when deeply nested and reused fragments were involved. This could lead to excessive resource consumption and denial of service. This has been remediated in @apollo/gateway version 2.10.1.

A lack of rate limiting in pjActionAJaxSend in Availability Booking Calendar 5.0 allows attackers to cause resource exhaustion.

The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Prior to 1.61.2 and 2.1.1, a vulnerability in Apollo Router allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically during named fragment expansion. Named fragments were being expanded once per fragment spread during query planning, leading to exponential resource usage when deeply nested and reused fragments were involved. This could lead to excessive resource consumption and denial of service. This has been remediated in apollo-router versions 1.61.2 and 2.1.1.