A vulnerability in the RADIUS authentication module of Cisco Policy Suite could allow an unauthenticated, remote attacker to determine whether a subscriber username is valid. The vulnerability occurs because the Cisco Policy Suite RADIUS server component returns different authentication failure messages based on the validity of usernames. An attacker could use these messages to determine whether a valid subscriber username has been identified. The attacker could use this information in subsequent attacks against the system. Cisco Bug IDs: CSCvg47830.

A vulnerability in the REST API of Cisco 5500 and 8500 Series Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to view system information that under normal circumstances should be prohibited. The vulnerability is due to incomplete input and validation checking mechanisms in the REST API URL request. An attacker could exploit this vulnerability by sending a malicious URL to the REST API. If successful, an exploit could allow the attacker to view sensitive system information. Cisco Bug IDs: CSCvg89442.

A vulnerability in Cisco WebEx Recording Format (WRF) Player could allow an unauthenticated, remote attacker to access sensitive data about the application. An attacker could exploit this vulnerability to gain information to conduct additional reconnaissance attacks. The vulnerability is due to a design flaw in Cisco WRF Player. An attacker could exploit this vulnerability by utilizing a maliciously crafted file that could bypass checks in the code and enable an attacker to read memory from outside the bounds of the mapped file. This vulnerability affects Cisco WebEx Business Suite meeting sites, Cisco WebEx Meetings sites, and Cisco WebEx WRF players. Cisco Bug IDs: CSCvh89107, CSCvh89113, CSCvh89132, CSCvh89142.

The sensitive information of webcam device is not properly protected. Remote attackers can unauthentically grant user’s credential.

An Information Exposure vulnerability in Juniper Networks SRC Series devices configured for NETCONF over SSH permits the negotiation of weak ciphers, which could allow a remote attacker to obtain sensitive information. A remote attacker with read and write access to network data could exploit this vulnerability to display plaintext bits from a block of ciphertext and obtain sensitive information. This issue affects all Juniper Networks SRC Series versions prior to 4.13.0-R6.

A vulnerability was found in GraphQL due to improper access controls on the GraphQL introspection query. This flaw allows unauthorized users to retrieve a comprehensive list of available queries and mutations. Exposure to this flaw increases the attack surface, as it can facilitate the discovery of flaws or errors specific to the application's GraphQL implementation.

In Apache Incubator Superset before 0.32, a user can view database names that he has no access to on a dropdown list in SQLLab

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices does not set the secure flag for cookies in an https session to an administration application, which makes it easier for remote attackers to capture these cookies by intercepting their transmission within an http session.

An issue was discovered in Open Ticket Request System (OTRS) 7.0.x through 7.0.8, Community Edition 6.0.x through 6.0.19, and Community Edition 5.0.x through 5.0.36. In the customer or external frontend, personal information of agents (e.g., Name and mail address) can be disclosed in external notes.

An exposure of sensitive information to an unauthorized actor vulnerability [CWE-200] in FortiClient for Linux version 7.0.2 and below, 6.4.7 and below and 6.2.9 and below may allow an unauthenticated attacker to access the confighandler webserver via external binaries.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in A WP Life Event Management Tickets Booking.This issue affects Event Management Tickets Booking: from n/a through 1.4.0.

A vulnerability classified as problematic was found in Hipcam Device up to 20240511. This vulnerability affects unknown code of the file /log/wifi.mac of the component MAC Address Handler. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-265078 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An information disclosure vulnerability in the ArcGIS Service Directory in Esri ArcGIS Enterprise versions 10.9.0 and below may allows a remote attacker to view hidden field names in feature layers. This issue may reveal field names, but not not disclose features.

In Eclipse Jetty 9.4.37.v20210219 to 9.4.38.v20210224, the default compliance mode allows requests with URIs that contain %2e or %2e%2e segments to access protected resources within the WEB-INF directory. For example a request to /context/%2e/WEB-INF/web.xml can retrieve the web.xml file. This can reveal sensitive information regarding the implementation of a web application.

For Eclipse Jetty versions <= 9.4.40, <= 10.0.2, <= 11.0.2, it is possible for requests to the ConcatServlet with a doubly encoded path to access protected resources within the WEB-INF directory. For example a request to `/concat?/%2557EB-INF/web.xml` can retrieve the web.xml file. This can reveal sensitive information regarding the implementation of a web application.

GE UR firmware versions prior to version 8.1x shares MODBUS memory map as part of the communications guide. GE was made aware a “Last-key pressed” MODBUS register can be used to gain unauthorized information.

Affected versions of Atlassian Bamboo allow an unauthenticated remote attacker to view a stack trace that may reveal the path for the home directory in disk and if certain files exists on the tmp directory, via a Sensitive Data Exposure vulnerability in the /chart endpoint. The affected versions are before version 7.2.2.

An issue was discovered in LibreNMS through 1.47. Information disclosure can occur: an attacker can fingerprint the exact code version installed and disclose local file paths.

SAP BusinessObjects Business Intelligence Platform (Web Services) - versions 420, 430, allows an attacker to inject arbitrary values as CMS parameters to perform lookups on the internal network which is otherwise not accessible externally. On successful exploitation, attacker can scan internal network to determine internal infrastructure for further attacks like remote file inclusion, retrieve server files, bypass firewall and force the vulnerable server to execute malicious requests, resulting in sensitive information disclosure. This causes limited impact on confidentiality of data.

CMS Made Simple version 1.x Form Builder before version 0.8.1.6 allows remote attackers to conduct information-disclosure attacks via exportxml.

The SCCM plugin for GLPI is a plugin to synchronize computers from SCCM (version 1802) to GLPI. In versions prior to 2.3.0, the Configuration page is publicly accessible in read-only mode. This issue is patched in version 2.3.0. No known workarounds exist.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Automattic WP Job Manager.This issue affects WP Job Manager: from n/a through 2.2.2.

NetSarang Xshell 7 before Build 0077 includes unintended code strings in paste operations.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in BogdanFix WP SendFox wp-sendfox allows Retrieve Embedded Sensitive Data.This issue affects WP SendFox: from n/a through <= 1.3.1.

A vulnerability was found in Multilaser Sirius RE016 MLT1.0. It has been rated as problematic. This issue affects some unknown processing of the file /cgi-bin/cstecgi.cgi. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

In Eclipse Jetty version 9.2.27, 9.3.26, and 9.4.16, the server running on Windows is vulnerable to exposure of the fully qualified Base Resource directory name on Windows to a remote client when it is configured for showing a Listing of directory contents. This information reveal is restricted to only the content in the configured base resource directories.

When updating a Process Group via the API in NiFi versions 1.3.0 to 1.9.2, the response to the request includes all of its contents (at the top most level, not recursively). The response included details about processors and controller services which the user may not have had read access to.

An improper synchronization logic in Samsung Email prior to version 6.1.41.0 can leak messages in certain mailbox in plain text when STARTTLS negotiation is failed.

In Eclipse Jetty version 7.x, 8.x, 9.2.27 and older, 9.3.26 and older, and 9.4.16 and older, the server running on any OS and Jetty version combination will reveal the configured fully qualified directory base resource location on the output of the 404 error for not finding a Context that matches the requested path. The default server behavior on jetty-distribution and jetty-home will include at the end of the Handler tree a DefaultHandler, which is responsible for reporting this 404 error, it presents the various configured contexts as HTML for users to click through to. This produced HTML includes output that contains the configured fully qualified directory base resource location for each context.

Yopify, an e-commerce notification plugin, up to April 06, 2017, leaks the first name, last initial, city, and recent purchase data of customers, all without user authorization.

The Formidable Form Builder plugin for WordPress is vulnerable to Sensitive Data Exposure in versions up to, and including, 2.05.03 via the frm_forms_preview AJAX action. This makes it possible for unauthenticated attackers to export all of the form entries for a given form.

Improper input validation in some Intel(R) Ethernet Adapters and Intel(R) Ethernet Controller I225 Manageability firmware may allow an unauthenticated user to potentially enable information disclosure via network access.

Information disclosure in Asuswrt-Merlin firmware for ASUS devices older than 384.4 and ASUS firmware before 3.0.0.4.382.50470 for devices allows remote attackers to acquire information on internal network IP address ranges by reading the new_lan_ip variable on the error_page.htm page.

An exposure of sensitive system information to an unauthorized control sphere vulnerability [CWE-497] in FortiDDoS version 5.4.0, version 5.3.2 and below, version 5.2.0, version 5.1.0, version 5.0.0, version 4.7.0, version 4.6.0, version 4.5.0, version 4.4.2 and below, FortiDDoS-CM version 5.3.0, version 5.2.0, version 5.1.0, version 5.0.0, version 4.7.0, FortiVoice version 6.0.6 and below, FortiRecorder version 6.0.3 and below and FortiMail version 6.4.1 and below, version 6.2.4 and below, version 6.0.9 and below may allow a remote, unauthenticated attacker to obtain potentially sensitive software-version information by reading a JavaScript file.

Physical path Leakage exists in Western Bridge Cobub Razor 0.8.0 via generate.php, controllers/getConfigTest.php, controllers/getUpdateTest.php, controllers/postclientdataTest.php, controllers/posterrorTest.php, controllers/posteventTest.php, controllers/posttagTest.php, controllers/postusinglogTest.php, fixtures/Controller_fixt.php, fixtures/Controller_fixt2.php, fixtures/view_fixt2.php, libs/ipTest.php, or models/commonDbfix.php in tests/.

Sylius is an Open Source eCommerce platform on top of Symfony. In versions of Sylius prior to 1.9.5 and 1.10.0-RC.1, part of the details (order ID, order number, items total, and token value) of all placed orders were exposed to unauthorized users. If exploited properly, a few additional information like the number of items in the cart and the date of the shipping may be fetched as well. This data seems to not be crucial nor is personal data, however, could be used for sociotechnical attacks or may expose a few details about shop condition to the third parties. The data possible to aggregate are the number of processed orders or their value in the moment of time. The problem has been patched at Sylius 1.9.5 and 1.10.0-RC.1. There are a few workarounds for the vulnerability. The first possible solution is to hide the problematic endpoints behind the firewall from not logged in users. This would put only the order list under the firewall and allow only authorized users to access it. Once a user is authorized, it will have access to theirs orders only. The second possible solution is to decorate the `\Sylius\Bundle\ApiBundle\Doctrine\QueryCollectionExtension\OrdersByLoggedInUserExtension` and throw `Symfony\Component\Security\Core\Exception\AccessDeniedException` if the class is executed for unauthorized user.

In Progress Telerik Report Server, version 2024 Q1 (10.0.24.305) or earlier, on IIS, an unauthenticated attacker can gain access to Telerik Report Server restricted functionality via a trust boundary violation vulnerability.

An issue was discovered in Mattermost Server before 4.2.0, 4.1.1, and 4.0.5. It allows attackers to obtain sensitive information (user statuses) via a REST API version 4 endpoint.

In Elasticsearch versions before 7.11.2 and 6.8.15 a document disclosure flaw was found when Document or Field Level Security is used. Search queries do not properly preserve security permissions when executing certain cross-cluster search queries. This could result in the search disclosing the existence of documents the attacker should not be able to view. This could result in an attacker gaining additional insight into potentially sensitive indices.

A CWE-200: Information Exposure vulnerability exists which could cause the troubleshooting archive to be accessed. Affected Products: 1-Phase Uninterruptible Power Supply (UPS) using NMC2 including Smart-UPS, Symmetra, and Galaxy 3500 with Network Management Card 2 (NMC2): AP9630/AP9630CH/AP9630J, AP9631/AP9631CH/AP9631J, AP9635/AP9635J (NMC2 AOS V6.9.8 and earlier), 3-Phase Uninterruptible Power Supply (UPS) using NMC2 including Symmetra PX 250/500 (SYPX) Network Management Card 2 (NMC2): AP9630/AP9630CH/AP9630J, AP9631/AP9631CH/AP9631J, AP9635/AP9635J (NMC2 AOS V6.9.6 and earlier), 3-Phase Uninterruptible Power Supply (UPS) using NMC2 including Symmetra PX 48/96/100/160 kW UPS (PX2), Symmetra PX 20/40 kW UPS (SY3P), Gutor (SXW, GVX), and Galaxy (GVMTS, GVMSA, GVXTS, GVXSA, G7K, GFC, G9KCHU): AP9630/AP9630CH/AP9630J, AP9631/AP9631CH/AP9631J, AP9635/AP9635CH (NMC2 AOS V6.9.6 and earlier), 1-Phase Uninterruptible Power Supply (UPS) using NMC3 including Smart-UPS, Symmetra, and Galaxy 3500 with Network Management Card 3 (NMC3): AP9640/AP9640J, AP9641/AP9641J, AP9643/AP9643J (NMC3 AOS V1.4.2.1 and earlier), APC Rack Power Distribution Units (PDU) using NMC2 2G Metered/Switched Rack PDUs with embedded NMC2: AP84XX, AP86XX, AP88XX, AP89XX (NMC2 AOS V6.9.6 and earlier), APC Rack Power Distribution Units (PDU) using NMC3 2G Metered/Switched Rack PDUs with embedded NMC3: APDU99xx (NMC3 AOS V1.4.0 and earlier), APC 3-Phase Power Distribution Products using NMC2 Galaxy RPP: GRPPIP2X84 (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 (NMC2) for InfraStruxure 150 kVA PDU with 84 Poles (X84P): PDPB150G6F (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 for InfraStruxure 40/60kVA PDU (XPDU) PD40G6FK1-M, PD40F6FK1-M, PD40L6FK1-M, PDRPPNX10 M,PD60G6FK1, PD60F6FK1, PD60L6FK1, PDRPPNX10, PD40E5EK20-M, PD40H5EK20-M (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 for Modular 150/175kVA PDU (XRDP): PDPM150G6F, PDPM150L6F, PDPM175G6H (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 for 400 and 500 kVA (PMM): PMM400-ALA, PMM400-ALAX, PMM400-CUB, PMM500-ALA, PMM500-ALAX, PMM500-CUB (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 for Modular PDU (XRDP2G): PDPM72F-5U, PDPM138H-5U, PDPM144F, PDPM138H-R, PDPM277H, PDPM288G6H (NMC2 AOS V6.9.6 and earlier), Rack Automatic Transfer Switches (ATS) Embedded NMC2: Rack Automatic Transfer Switches - AP44XX (ATS4G) (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 (NMC2) Cooling Products: InRow Cooling for series ACRP5xx, ACRP1xx, ACRD5xx, and ACRC5xx SKUs (ACRP2G), InRow Cooling for series ACRC10x SKUs (RC10X2G), InRow Cooling for series ACRD6xx and ACRC6xx SKUs (ACRD2G), InRow Cooling Display for series ACRD3xx (ACRC2G), InRow Cooling for series ACSC1xx SKUs (SC2G), InRow Cooling for series ACRD1xx and ACRD2xx (ACRPTK2G), Ecoflair IAEC25/50 Air Economizer Display (EB2G), Uniflair SP UCF0481I, UCF0341I (UNFLRSP), Uniflair LE DX Perimeter Cooling Display for SKUs: IDAV, IDEV, IDWV, IUAV, IUEV, IUWV, IXAV, IXEV, IXWV, LDAV, LDEV, and LDWV (LEDX2G), Refrigerant Distribution Unit: ACDA9xx (RDU) (NMC2 AOS V6.9.6 and earlier), Environmental Monitoring Unit with embedded NMC2 (NB250): NetBotz NBRK0250 (NMC2 AOS V6.9.6 and earlier), and Network Management Card 2 (NMC2): AP9922 Battery Management System (BM4) (NMC2 AOS V6.9.6 and earlier)

Rails is a web-application framework. Starting with version 5.2.0, there is a possible sensitive session information leak in Active Storage. By default, Active Storage sends a Set-Cookie header along with the user's session cookie when serving blobs. It also sets Cache-Control to public. Certain proxies may cache the Set-Cookie, leading to an information leak. The vulnerability is fixed in 7.0.8.1 and 6.1.7.7.

Elasticsearch versions before 7.11.2 and 6.8.15 contain a document disclosure flaw was found in the Elasticsearch suggester and profile API when Document and Field Level Security are enabled. The suggester and profile API are normally disabled for an index when document level security is enabled on the index. Certain queries are able to enable the profiler and suggester which could lead to disclosing the existence of documents and fields the attacker should not be able to view.

Shopware is an open source eCommerce platform. Versions prior to 5.6.10 are vulnerable to system information leakage in error handling. Users are recommend to update to version 5.6.10. You can get the update to 5.6.10 regularly via the Auto-Updater or directly via the download overview.

Observable behavioral discrepancy vulnerability in QSAN Storage Manager allows remote attackers to obtain the system information without permissions. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

An issue was discovered on Samsung mobile devices with software through 2016-10-25 (Exynos5 chipsets). Attackers can read kernel addresses in the log because an incorrect format specifier is used. The Samsung ID is SVE-2016-7551 (January 2017).

Mashov – CWE-200: Exposure of Sensitive Information to an Unauthorized Actor

An issue was discovered on Samsung mobile devices with M(6.0) and N(7.0) software. Contact information can leak to a log file because of the broadcasting of an unprotected intent. The Samsung ID is SVE-2016-7180 (February 2017).

An issue was discovered in Mattermost Server before 4.1.0, 4.0.4, and 3.10.3. It allows attackers to discover team invite IDs via team API endpoints.

An issue was discovered in Mattermost Server before 4.3.0, 4.2.1, and 4.1.2. It discloses the team creator's e-mail address to members.