SSMC3.7.0.0 is vulnerable to remote authentication bypass. HPE StoreServ Management Console (SSMC) 3.7.0.0 is an off node multiarray manager web application and remains isolated from data on the managed arrays. HPE has provided an update to HPE StoreServ Management Console (SSMC) software 3.7.0.0* Upgrade to HPE 3PAR StoreServ Management Console 3.7.1.1 or later.

A security vulnerability has been identified in the HPE Edgeline Infrastructure Manager, also known as HPE Edgeline Infrastructure Management Software. The vulnerability could be remotely exploited to bypass remote authentication leading to execution of arbitrary commands, gaining privileged access, causing denial of service, and changing the configuration.

Multiple NEC products (Express5800/T110j, Express5800/T110j-S, Express5800/T110j (2nd-Gen), Express5800/T110j-S (2nd-Gen), iStorage NS100Ti, and Express5800/GT110j) where Baseboard Management Controller (BMC) firmware Rev1.09 and earlier is applied allows remote attackers to bypass authentication and then obtain/modify BMC setting information, obtain monitoring information, or reboot/shut down the vulnerable product via unspecified vectors.

IBM Data Risk Manager 2.0.1, 2.0.2, 2.0.3, 2.0.4, 2.0.5, and 2.0.6 could allow a remote attacker to bypass security restrictions when configured with SAML authentication. By sending a specially crafted HTTP request, an attacker could exploit this vulnerability to bypass the authentication process and gain full administrative access to the system. IBM X-Force ID: 180532.

In Jenkins WSO2 Oauth Plugin 1.0 and earlier, authentication claims are accepted without validation by the "WSO2 Oauth" security realm, allowing unauthenticated attackers to log in to controllers using this security realm using any username and any password, including usernames that do not exist.

CAMS for HIS CENTUM CS 3000 (includes CENTUM CS 3000 Small) R3.08.10 to R3.09.50, CENTUM VP (includes CENTUM VP Small, Basic) R4.01.00 to R6.07.00, B/M9000CS R5.04.01 to R5.05.01, and B/M9000 VP R6.01.01 to R8.03.01 allows a remote unauthenticated attacker to bypass authentication and send altered communication packets via unspecified vectors.

IBM InfoSphere Data Replication 11.4 and IBM InfoSphere Change Data Capture for z/OS 10.2.1, under certain configurations, could allow a user to bypass authentication mechanisms using an empty password string. IBM X-Force ID: 189834

IBM Cognos Controller 10.4.0, 10.4.1, and 10.4.2 could allow a remote attacker to bypass security restrictions, caused by improper validation of authentication cookies. IBM X-Force ID: 190847.

Vulnerabilities in the web-based management interface of Aruba EdgeConnect Enterprise Orchestrator could allow an unauthenticated remote attacker to bypass authentication. Successful exploitation of these vulnerabilities could allow an attacker to gain administrative privileges leading to a complete compromise of the Aruba EdgeConnect Enterprise Orchestrator with versions 9.1.2.40051 and below, 9.0.7.40108 and below, 8.10.23.40009 and below, and any older branches of Orchestrator not specifically mentioned.

[Calendar01], [Calendar02], [PKOBO-News01], [PKOBO-vote01], [Telop01], [Gallery01], [CalendarForm01], and [Link01] [Calendar01] free edition ver1.0.0, [Calendar02] free edition ver1.0.0, [PKOBO-News01] free edition ver1.0.3 and earlier, [PKOBO-vote01] free edition ver1.0.1 and earlier, [Telop01] free edition ver1.0.0, [Gallery01] free edition ver1.0.3 and earlier, [CalendarForm01] free edition ver1.0.3 and earlier, and [Link01] free edition ver1.0.0 allows remote attackers to bypass authentication and log in to the product with administrative privileges via unspecified vectors.

The Ultimate Membership Pro plugin for WordPress is vulnerable to Authentication Bypass in versions between, and including, 7.3 to 8.6. This makes it possible for unauthenticated attackers to login as any user, including the site administrator with a default user ID of 1, via the username or user ID.

A vulnerability was found in Klapp App and classified as problematic. This issue affects some unknown processing of the JSON Web Token Handler. The manipulation leads to weak authentication. The attack may be initiated remotely.

The vulnerability exists in ADiTaaS (Allied Digital Integrated Tool-as-a-Service) version 5.1 due to an improper authentication vulnerability in the ADiTaaS backend API. An unauthenticated remote attacker could exploit this vulnerability by sending specially crafted HTTP requests to the vulnerable platform. Successful exploitation of this vulnerability could allow the attacker to gain full access to the customers’ data and completely compromise the targeted platform.

An access control issue in H3C A210-G A210-GV100R005 allows attackers to authenticate without a password.

An authentication bypass vulnerability exists in Control iD iDSecure v4.7.32.0. The login routine used by iDS-Core.dll contains a "passwordCustom" option that allows an unauthenticated attacker to compute valid credentials that can be used to bypass authentication and act as an administrative user.

The ASUS DSL-N17U modem with firmware 1.1.0.2 allows attackers to access the admin interface by changing the admin password without authentication via a POST request to Advanced_System_Content.asp with the uiViewTools_username=admin&uiViewTools_Password= and uiViewTools_PasswordConfirm= substrings.

Authentication Bypass vulnerability in miniOrange WP OAuth Server plugin <= 3.0.4 at WordPress.

Barco wePresent WiPG-1600W devices allow Authentication Bypass. Affected Version(s): 2.5.1.8. The Barco wePresent WiPG-1600W web interface does not use session cookies for tracking authenticated sessions. Instead, the web interface uses a "SEID" token that is appended to the end of URLs in GET requests. Thus the "SEID" would be exposed in web proxy logs and browser history. An attacker that is able to capture the "SEID" and originate requests from the same IP address (via a NAT device or web proxy) would be able to access the user interface of the device without having to know the credentials.

An issue was discovered on Western Digital My Cloud OS 5 devices before 5.07.118. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to gain access to the device.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary commands with administrative commands on an affected device. The vulnerability is due to improper session management on affected devices. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.

On Western Digital My Cloud OS 5 devices before 5.06.115, the NAS Admin dashboard has an authentication bypass vulnerability that could allow an unauthenticated user to execute privileged commands on the device.

An issue was discovered on Western Digital My Cloud OS 5 devices before 5.06.115. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to execute privileged commands on the device via a cookie. (In addition, an upload endpoint could then be used by an authenticated administrator to upload executable PHP scripts.)

An issue was discovered on Fujitsu Eternus Storage DX200 S4 devices through 2020-11-25. After logging into the portal as a root user (using any web browser), the portal can be accessed with root privileges when the URI cgi-bin/csp?cspid={XXXXXXXXXX}&csppage=cgi_PgOverview&csplang=en is visited from a different web browser.

An issue was discovered on Western Digital My Cloud OS 5 devices before 5.06.115. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to execute privileged commands on the device via a cookie, because of insufficient validation of URI paths.

ask_password in Tomb 2.0 through 2.7 returns a warning when pinentry-curses is used and $DISPLAY is non-empty, causing affected users' files to be encrypted with "tomb {W] Detected DISPLAY, but only pinentry-curses is found." as the encryption key.

An issue in D-Link DI-8100 16.07.26A1 allows a remote attacker to bypass administrator login authentication

A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user.

An issue in the OTP mechanism of Chavara Family Welfare Centre Chavara Matrimony Site v2.0 allows attackers to bypass authentication via supplying a crafted request.

In Alerta before version 8.1.0, users may be able to bypass LDAP authentication if they provide an empty password when Alerta server is configure to use LDAP as the authorization provider. Only deployments where LDAP servers are configured to allow unauthenticated authentication mechanism for anonymous authorization are affected. A fix has been implemented in version 8.1.0 that returns HTTP 401 Unauthorized response for any authentication attempts where the password field is empty. As a workaround LDAP administrators can disallow unauthenticated bind requests by clients.

Loxone Miniserver devices with firmware before 11.1 (aka 11.1.9.3) are unable to use an authentication method that is based on the "signature of the update package." Therefore, these devices (or attackers who are spoofing these devices) can continue to use an unauthenticated cloud service for an indeterminate time period (possibly forever). Once an individual device's firmware is updated, and authentication occurs once, the cloud service recategorizes the device so that authentication is subsequently always required, and spoofing cannot occur.

HGiga MailSherlock contains weak authentication flaw that attackers grant privilege remotely with default password generation mechanism.

The LDAP authentication method in LdapLoginModule in Hazelcast IMDG Enterprise 4.x before 4.0.3, and Jet Enterprise 4.x through 4.2, doesn't verify properly the password in some system-user-dn scenarios. As a result, users (clients/members) can be authenticated even if they provide invalid passwords.

CrateDB 5.5.1 is contains an authentication bypass vulnerability in the Admin UI component. After configuring password authentication and_ Local_ In the case of an address, identity authentication can be bypassed by setting the X-Real IP request header to a specific value and accessing the Admin UI directly using the default user identity.(https://github.com/crate/crate/issues/15231)

In cPanel before 88.0.3, insecure chkservd test credentials are used on a templated VM (SEC-554).

In cPanel before 88.0.3, insecure RNDC credentials are used for BIND on a templated VM (SEC-549).

Because of unauthenticated password changes in ForLogic Qualiex v1 and v3, customer and admin permissions and data can be accessed via a simple request.

PKCE was implemented in the OAuth implementation in workers-oauth-provider that is part of MCP framework https://github.com/cloudflare/workers-mcp . However, it was found that an attacker could cause the check to be skipped. Fixed in: https://github.com/cloudflare/workers-oauth-provider/pull/27 https://github.com/cloudflare/workers-oauth-provider/pull/27 Impact: PKCE is a defense-in-depth mechanism against certain kinds of attacks and was an optional extension in OAuth 2.0 which became required in the OAuth 2.1 draft. (Note that the MCP specification requires OAuth 2.1.). This bug completely bypasses PKCE protection.

A flaw was found in Linux-Pam in versions prior to 1.5.1 in the way it handle empty passwords for non-existing users. When the user doesn't exist PAM try to authenticate with root and in the case of an empty password it successfully authenticate.

file.cgi in Secure Computing SecurityReporter (aka Network Security Analyzer) before 4.6.3 allows remote attackers to bypass authentication via a name parameter ending with a "%00.gif" sequence. NOTE: a separate traversal vulnerability could be leveraged to download arbitrary files.

An issue was discovered in WildFly 10.1.2.Final. In the case of a default installation without a security realm reference, an attacker can successfully access the server without authentication. NOTE: the Security Realms documentation in the product's Admin Guide indicates that "without a security realm reference" implies "effectively unsecured." The vendor explicitly supports these unsecured configurations because they have valid use cases during development

Improper Authentication vulnerability in Mestres do WP Checkout Mestres WP allows Privilege Escalation.This issue affects Checkout Mestres WP: from n/a through 7.1.9.7.

Improper Authentication vulnerability in Abdul Hakeem Build App Online allows Privilege Escalation.This issue affects Build App Online: from n/a through 1.0.19.

In S+ Operations and S+ History, it is possible that an unauthenticated user could inject values to the Operations History server (or standalone S+ History server) and ultimately write values to the controlled process.

An issue was discovered in Zoho ManageEngine Exchange Reporter Plus before build number 5510, AD360 before build number 4228, ADSelfService Plus before build number 5817, DataSecurity Plus before build number 6033, RecoverManager Plus before build number 6017, EventLog Analyzer before build number 12136, ADAudit Plus before build number 6052, O365 Manager Plus before build number 4334, Cloud Security Plus before build number 4110, ADManager Plus before build number 7055, and Log360 before build number 5166. The remotely accessible Java servlet com.manageengine.ads.fw.servlet.UpdateProductDetails is prone to an authentication bypass. System integration properties can be modified and lead to full ManageEngine suite compromise.

A vulnerability in the single sign-on (SSO) implementation of Cisco BroadWorks Application Delivery Platform and Cisco BroadWorks Xtended Services Platform could allow an unauthenticated, remote attacker to forge the credentials required to access an affected system. This vulnerability is due to the method used to validate SSO tokens. An attacker could exploit this vulnerability by authenticating to the application with forged credentials. A successful exploit could allow the attacker to commit toll fraud or to execute commands at the privilege level of the forged account. If that account is an Administrator account, the attacker would have the ability to view confidential information, modify customer settings, or modify settings for other users. To exploit this vulnerability, the attacker would need a valid user ID that is associated with an affected Cisco BroadWorks system.

Tenda AC18 Router through V15.03.05.05_EN and through V15.03.05.19(6318) CN devices could cause a remote code execution due to incorrect authentication handling of vulnerable logincheck() function in /usr/lib/lua/ngx_authserver/ngx_wdas.lua file if the administrator UI Interface is set to "radius".

In PrestaShop from version 1.5.0.0 and before version 1.7.6.6, the authentication system is malformed and an attacker is able to forge requests and execute admin commands. The problem is fixed in 1.7.6.6.

An authentication bypass vulnerability exists in HPE StoreOnce Software.

confirm.php in ATutor 2.2 and earlier allows remote attackers to bypass authentication and gain access as an existing user via the auto_login parameter.

The vulnerability exists in Uniview IP Camera due to identification and authentication failure at its web-based management interface. A remote attacker could exploit this vulnerability by sending specially crafted HTTP requests to the vulnerable device. Successful exploitation of this vulnerability could allow the attacker to gain complete control of the targeted device.