Arbitrary Class Instantiation via Model Manifest in Apache OpenNLP ExtensionLoader Versions Affected: before 1.9.5, before 2.5.9, before 3.0.0-M3 Description: The ExtensionLoader.instantiateExtension(Class, String) method loads a class by its fully-qualified name via Class.forName() and invokes its no-arg constructor, with the class name sourced from the manifest.properties entry of a model archive. The existing isAssignableFrom check correctly rejects classes that are not subtypes of the expected extension interface (BaseToolFactory for factory=, ArtifactSerializer for serializer-class-*), but the check runs after Class.forName() has already loaded and initialized the named class. Class.forName() with default initialization semantics executes the target class's static initializer before returning, so an attacker who can supply a crafted model archive can cause the static initializer of any class on the classpath to run during model loading, regardless of whether that class passes the subsequent type check. Exploitation requires a class with attacker-useful side effects in its static initializer (for example, JNDI lookup, outbound network I/O, or filesystem access) to be present on the classpath, so this is not a drop-in remote code execution; however, the attack surface grows as third-party model distribution becomes more common (community model repositories, Hugging Face-style sharing), where users routinely load model files from origins they do not control. A secondary, narrower vector affects deployments that ship legitimate BaseToolFactory or ArtifactSerializer subclasses with side-effecting no-arg constructors: a malicious manifest can name such a class and force its constructor to run during model load. Mitigation: * 2.x users should upgrade to 2.5.9. * 3.x users should upgrade to 3.0.0-M3. Note: The fix introduces a package-prefix allowlist that is consulted before Class.forName() is invoked, so the static initializer of a disallowed class is never executed. Classes under the opennlp. prefix remain permitted by default. Deployments that load models referencing factories or serializers outside opennlp.* must opt those packages in, either programmatically via ExtensionLoader.registerAllowedPackage(String) before the first model load, or by setting the OPENNLP_EXT_ALLOWED_PACKAGES system property to a comma-separated list of allowed package prefixes. Users who cannot upgrade immediately should ensure that all model files are sourced from trusted origins and should audit their classpath for classes with side-effecting static initializers or constructors, particularly any that perform JNDI lookups, network requests, or filesystem operations during class initialization.
Apache Nuttx Versions prior to 10.1.0 are vulnerable to integer wrap-around in functions malloc, realloc and memalign. This improper memory assignment can lead to arbitrary memory allocation, resulting in unexpected behavior such as a crash or a remote code injection/execution.
Apache OFBiz has unsafe deserialization prior to 17.12.06. An unauthenticated attacker can use this vulnerability to successfully take over Apache OFBiz.
In Apache HTTP Server versions 2.4.0 to 2.4.46 a specially crafted SessionHeader sent by an origin server could cause a heap overflow
Apache Tika before 1.14 allows Java code execution for serialized objects embedded in MATLAB files. The issue exists because Tika invokes JMatIO to do native deserialization.
The Struts 1 plugin in Apache Struts 2.1.x and 2.3.x might allow remote code execution via a malicious field value passed in a raw message to the ActionMessage.
Apache Shiro before 1.2.5, when a cipher key has not been configured for the "remember me" feature, allows remote attackers to execute arbitrary code or bypass intended access restrictions via an unspecified request parameter.
JmsBinding.extractBodyFromJms() in camel-jms, and the equivalent JmsBinding class in camel-sjms, deserialized the payload of incoming JMS ObjectMessage values via javax.jms.ObjectMessage.getObject() without applying any ObjectInputFilter, class allowlist or class denylist. Because this code path is reached whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer, an attacker able to publish a crafted ObjectMessage to a queue or topic consumed by a Camel application could achieve remote code execution when a deserialization gadget chain was present on the classpath. The same handling was reached transitively through camel-sjms2 (whose Sjms2Endpoint extends SjmsEndpoint) and through camel-amqp (whose AMQPJmsBinding extends JmsBinding), and by other JMS-family components built on JmsComponent such as camel-activemq and camel-activemq6. This issue affects Apache Camel: from 3.0.0 before 4.14.7, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.7. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2.
Deserialization of untrusted data vulnerability that may allow class-registration checks to be bypassed during Java lambda deserialization. Only lambda capture class is affected This issue affects Apache Fory: from before 1.4.0. Users are recommended to upgrade to version 1.4.0, which fixes the issue.
XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.
The fix for CVE-2024-52046 in Apache MINA AbstractIoBuffer.getObject() was incomplete. The classname allowlist of classes allowed to be deserialized was applied too late after a static initializer in a class to be read might already have been executed. Affected versions are Apache MINA 2.0.0 <= 2.0.27, 2.1.0 <= 2.1.10, and 2.2.0 <= 2.2.5. The problem is resolved in Apache MINA 2.0.28, 2.1.11, and 2.2.6 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade
Forced OGNL evaluation, when evaluated on raw user input in tag attributes, may lead to remote code execution. Affected software : Apache Struts 2.0.0 - Struts 2.5.25.
Apache Shiro before 1.5.2, when using Apache Shiro with Spring dynamic controllers, a specially crafted request may cause an authentication bypass.
Use of Externally-Controlled Input to Select Classes or Code ('Unsafe Reflection') vulnerability in Apache IoTDB. The pipe processor reads a fully qualified Java class name and instantiates it using Class.forName().newInstance() without any validation or allowlisting. This issue affects Apache IoTDB: from 1.0.0 before 2.0.10. Users are recommended to upgrade to version 2.0.10, which fixes the issue.
Apache OFBiz 12.04.x before 12.04.06 and 13.07.x before 13.07.03 allow remote attackers to execute arbitrary commands via a crafted serialized Java object, related to the Apache Commons Collections library.
Previous versions of Apache Flex BlazeDS (4.7.2 and earlier) did not restrict which types were allowed for AMF(X) object deserialization by default. During the deserialization process code is executed that for several known types has undesired side-effects. Other, unknown types may also exhibit such behaviors. One vector in the Java standard library exists that allows an attacker to trigger possibly further exploitable Java deserialization of untrusted data. Other known vectors in third party libraries can be used to trigger remote code execution.
Vendor: The Apache Software Foundation Versions Affected: Apache OpenMeetings from 2.0.0 before 7.0.0 Description: Attacker can elevate their privileges in any room
The Fileserver web application in Apache ActiveMQ 5.x before 5.14.0 allows remote attackers to upload and execute arbitrary files via an HTTP PUT followed by an HTTP MOVE request.
Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Software Foundation Apache Airflow Hive Provider.This issue affects Apache Airflow Hive Provider: before 6.0.0.
A deserialization flaw was found in Apache Chainsaw versions prior to 2.1.0 which could lead to malicious code execution.
In Apache Spark 2.4.5 and earlier, a standalone resource manager's master may be configured to require authentication (spark.authenticate) via a shared secret. When enabled, however, a specially-crafted RPC to the master can succeed in starting an application's resources on the Spark cluster, even without the shared key. This can be leveraged to execute shell commands on the host machine. This does not affect Spark clusters using other resource managers (YARN, Mesos, etc).
Apache jUDDI uses several classes related to Java's Remote Method Invocation (RMI) which (as an extension to UDDI) provides an alternate transport for accessing UDDI services. RMI uses the default Java serialization mechanism to pass parameters in RMI invocations. A remote attacker can send a malicious serialized object to the above RMI entries. The objects get deserialized without any check on the incoming data. In the worst case, it may let the attacker run arbitrary code remotely. For both jUDDI web service applications and jUDDI clients, the usage of RMI is disabled by default. Since this is an optional feature and an extension to the UDDI protocol, the likelihood of impact is low. Starting with 3.3.10, all RMI related code was removed.
Apache Gobblin trusts all certificates used for LDAP connections in Gobblin-as-a-Service. This affects versions <= 0.15.0. Users should update to version 0.16.0 which addresses this issue.
Some component in Dubbo will try to print the formated string of the input arguments, which will possibly cause RCE for a maliciously customized bean with special toString method. In the latest version, we fix the toString call in timeout, cache and some other places. Fixed in Apache Dubbo 2.7.13
The TLS protocol, and the SSL protocol 3.0 and possibly earlier, as used in Microsoft Internet Information Services (IIS) 7.0, mod_ssl in the Apache HTTP Server 2.2.14 and earlier, OpenSSL before 0.9.8l, GnuTLS 2.8.5 and earlier, Mozilla Network Security Services (NSS) 3.12.4 and earlier, multiple Cisco products, and other products, does not properly associate renegotiation handshakes with an existing connection, which allows man-in-the-middle attackers to insert data into HTTPS sessions, and possibly other types of sessions protected by TLS or SSL, by sending an unauthenticated request that is processed retroactively by a server in a post-renegotiation context, related to a "plaintext injection" attack, aka the "Project Mogul" issue.
Pre-auth RCE in Apache Ofbiz 18.12.09. It's due to XML-RPC no longer maintained still present. This issue affects Apache OFBiz: before 18.12.10. Users are recommended to upgrade to version 18.12.10
Apache OFBiz has unsafe deserialization prior to 17.12.07 version
CWE-502 Deserialization of Untrusted Data at the rabbitmq-connector plugin module in Apache EventMesh (incubating) V1.7.0\V1.8.0 on windows\linux\mac os e.g. platforms allows attackers to send controlled message and remote code execute via rabbitmq messages. Users can use the code under the master branch in project repo to fix this issue, we will release the new version as soon as possible.
A bug in `BaseSerialization.deserialize()` allowed unrestricted `import_string()` of attacker-controlled class paths when the Scheduler / API Server loaded a serialized DAG: a DAG author could embed a malicious trigger into a DAG to gain remote code execution on the API Server / Scheduler process, crossing the Airflow security boundary that DAG-author code must never execute in those processes. Users are advised to upgrade to `apache-airflow` 3.3.0 or later. As a defense-in-depth mitigation, deployments where DAG-author trust is limited can restrict the `[core] allowed_deserialization_classes` config to a narrow allowlist.
Use After Free vulnerability in Apache HTTP Server with mod_ldap in per-directory configuration This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67. Users are recommended to upgrade to version 2.4.68, which fixes the issue.
Session Validation attacks in Apache Superset versions up to and including 2.0.1. Installations that have not altered the default configured SECRET_KEY according to installation instructions allow for an attacker to authenticate and access unauthorized resources. This does not affect Superset administrators who have changed the default value for SECRET_KEY config. All superset installations should always set a unique secure random SECRET_KEY. Your SECRET_KEY is used to securely sign all session cookies and encrypting sensitive information on the database. Add a strong SECRET_KEY to your `superset_config.py` file like: SECRET_KEY = <YOUR_OWN_RANDOM_GENERATED_SECRET_KEY> Alternatively you can set it with `SUPERSET_SECRET_KEY` environment variable.
Heap-based Buffer Overflow vulnerability in mod_proxy_ajp of Apache HTTP Server. If mod_proxy_ajp connects to a malicious AJP server this AJP server can send a malicious AJP message back to mod_proxy_ajp and cause it to write 4 attacker controlled bytes after the end of a heap based buffer. This issue affects Apache HTTP Server: through 2.4.66. Users are recommended to upgrade to version 2.4.67, which fixes the issue.
Remote code execution occurs in Apache Solr before 7.1 with Apache Lucene before 7.1 by exploiting XXE in conjunction with use of a Config API add-listener command to reach the RunExecutableListener class. Elasticsearch, although it uses Lucene, is NOT vulnerable to this. Note that the XML external entity expansion vulnerability occurs in the XML Query Parser which is available, by default, for any query request with parameters deftype=xmlparser and can be exploited to upload malicious data to the /upload request handler or as Blind XXE using ftp wrapper in order to read arbitrary local files from the Solr server. Note also that the second vulnerability relates to remote code execution using the RunExecutableListener available on all affected versions of Solr.
Improper Input Validation vulnerability in Apache Camel AWS SNS component. The camel-aws2-sns component filters Camel headers through a component-specific HeaderFilterStrategy, Sns2HeaderFilterStrategy. Like the sibling Sqs2HeaderFilterStrategy, it originally configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers from being written out) and did not configure an inbound filter rule. For the related camel-aws2-sqs component this inbound gap was exploitable, because the Sqs2Consumer maps inbound SQS message attributes into the Camel Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, allowing a message sender to inject Camel control headers (tracked as CVE-2026-46456). camel-aws2-sns, by contrast, is producer-only: Sns2Endpoint does not support consumers (createConsumer throws UnsupportedOperationException, 'You cannot receive messages from this endpoint'), so no externally-supplied message attributes are ever mapped inbound into a Camel Exchange through SNS, and the missing inbound filter rule on Sns2HeaderFilterStrategy was therefore not reachable by an attacker. As part of the same fix (CAMEL-23506), an inbound filter rule (setInFilterStartsWith for the Camel namespace) was added to Sns2HeaderFilterStrategy so that its configuration matches the corrected Sqs2HeaderFilterStrategy and the other sibling strategies. This is a defense-in-depth alignment with no known exploit path in camel-aws2-sns. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. This is a defense-in-depth hardening change with no known exploit path in camel-aws2-sns, which is producer-only, so no urgent action or workaround is required. Users who want the aligned behaviour can upgrade to version 4.21.0, or to 4.14.8 on the 4.14.x LTS releases stream, or to 4.18.3 on the 4.18.x releases stream, which contain the change. As a general best practice, operators should continue to apply least-privilege IAM permissions on their SNS topics.
Xstream API versions up to 1.4.6 and version 1.4.10, if the security framework has not been initialized, may allow a remote attacker to run arbitrary shell commands by manipulating the processed input stream when unmarshaling XML or any supported format. e.g. JSON.
Heap type confusion and out-of-bounds read/write in the Apache Fory C++ implementation. When deserializing data in compatible mode, the field-skip paths do not correctly validate the declared field types against the actual data, so input with an inconsistent schema can cause type confusion and out-of-bounds memory access. Only the C++ implementation is affected; other language implementations of Apache Fory are not. This issue affects Apache Fory C++: from 0.14.0 before 1.4.0. Users are recommended to upgrade to version 1.4.0, which fixes the issue.
Improper Privilege Management vulnerability in Apache Syncope. When: * the all-Java user workflow adapter is configured, or * the Flowable user workflow adapter is configured, bearing a BPMN definition not requiring admin approval for user self registration of self update requests the following scenario could happen. A REST API call can allow the user to grant themselves one or more of defined Roles, thus gaining their Entitlements and becoming in fact an administrator; the actual Entitlements gained depend on the Roles that are effectively defined on the specific Syncope deployment. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.6, from 4.1.0-M0 through 4.1.1. Users are recommended to upgrade to version 4.0.7 / 4.1.2, which fix this issue.
Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Apache Kylin. A backend API may bring job config parameters to OS command line. This issue affects Apache Kylin: from 4 through 5.0.3. Users are recommended to upgrade to version 5.0.4, which fixes the issue.
Improper Isolation or Compartmentalization vulnerability in Apache Syncope. An administrator with adequate entitlements for Implementations can create a malicious Groovy class containing untrusted code bypassing the Groovy security sandbox. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.6, from 4.1.0-M0 through 4.1.1. Users are recommended to upgrade to version 4.0.7 / 4.1.2, which fix this issue by tightening the Groovy security sandbox.
Improper Input Validation vulnerability in Apache Camel AWS2-SQS Component. The camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy.
Improper Isolation or Compartmentalization vulnerability in Apache Syncope. An administrator with adequate entitlements can achieve remote code execution through the connector subsystem by relying on scripted connectors' (REST and SQL) capability to run Groovy scripts. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.6, from 4.1.0-M0 through 4.1.1. Users are recommended to upgrade to version 4.0.7 / 4.1.2, which fix this issue by hardening the Groovy security sandbox.
Improper Isolation or Compartmentalization vulnerability in Apache Syncope. An administrator with adequate entitlements can import arbitrary BPMN process definitions via the REST API and then start the process. When a BPMN process containing a Groovy scriptTask is imported and started, the Groovy script is executed directly on the server, with no sandbox. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.6, from 4.1.0-M0 through 4.1.1. Users are recommended to upgrade to version 4.0.7 / 4.1.2, which fix this issue by wrapping Flowable's Groovy scriptTasks with security sandbox.
Improper Authentication, Missing Authentication for Critical Function, Not Failing Securely ('Failing Open') vulnerability in Apache Camel Keycloak Component. The KeycloakSecurityPolicy of camel-keycloak guards a route by running KeycloakSecurityProcessor.beforeProcess(), which performs three checks in sequence: it rejects a request that carries no access token, then - only if requiredRoles is non-empty - validates the roles, and - only if requiredPermissions is non-empty - validates the permissions. The actual cryptographic verification of the bearer access token (signature, issuer and expiry for a local JWT, or active-state and issuer for token introspection) is performed exclusively inside those role and permission checks. KeycloakSecurityPolicy defaults requiredRoles and requiredPermissions to empty - which is the documented 'Basic Setup' - so on a route configured that way the role and permission checks are skipped and the access token is therefore never verified. The token-presence check still rejects a missing token, but an invalid token is accepted: any non-null value in the Authorization: Bearer header - including an arbitrary string or a forged, unsigned JWT - passes the policy and the request reaches the protected route, with no signature, issuer or expiry check and no request to Keycloak. The token is read from the inbound request header because allowTokenFromHeader defaults to true. Because the normal reason to place a route behind this policy is that the route performs server-side work, the bypass results in unauthenticated access to that work; where the protected route forwards to a code-execution-capable producer, it can result in unauthenticated remote code execution. This defect is independent of CVE-2026-23552: that issue concerned the issuer claim and was fixed by adding a check inside the verification routine, but here the verification routine is not reached at all in the default configuration, so the defect remains. This issue affects Apache Camel: from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, configure a non-empty requiredRoles or requiredPermissions on every KeycloakSecurityPolicy so that the token-verification path is exercised, set allowTokenFromHeader to false where the token is not expected from the request header, or perform token verification at the framework layer ahead of the policy.
A logic error in OAuthRequestFilter rejects legitimate requests originating from the bound IP address, while blindly allowing requests from any other IP address. Enabling this security feature inadvertently creates an inverse security check. Users are recommended to upgrade to versions 4.2.2 or 4.1.7, which fixes this issue.
Apache CXF's EndpointReferenceUtils and W3CMultiSchemaFactory classes construct a SAXParserFactory without the necessary JAXP hardening configurations, enabling out-of-band (OOB) external entity resolution. Users are recommended to upgrade to versions 4.2.2 or 4.1.7, which fix this issue.
Apache MINA's AbstractIoBuffer.resolveClass() contains two branches, one of them (for static classes or primitive types) does not check the class at all, bypassing the classname allowlist and allowing arbitrary code to be executed. The fix checks if the class is present in the accepted class filter before calling Class.forName(). Affected versions are Apache MINA 2.0.0 <= 2.0.27, 2.1.0 <= 2.1.10, and 2.2.0 <= 2.2.5. The problem is resolved in Apache MINA 2.0.28, 2.1.11, and 2.2.6 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade.
Unspecified vulnerability in Oracle Java SE 6u113, 7u99, and 8u77; Java SE Embedded 8u77; and JRockit R28.3.9 allows remote attackers to affect confidentiality, integrity, and availability via vectors related to JMX.
Affected Products and Versions * Apache Druid * Affected Versions: 0.17.0 through 35.x (all versions prior to 36.0.0) * Prerequisites: * druid-basic-security extension enabled * LDAP authenticator configured * Underlying LDAP server permits anonymous bind Vulnerability Description An authentication bypass vulnerability exists in Apache Druid when using the druid-basic-security extension with LDAP authentication. If the underlying LDAP server is configured to allow anonymous binds, an attacker can bypass authentication by providing an existing username with an empty password. This allows unauthorized access to otherwise restricted Druid resources without valid credentials. The vulnerability stems from improper validation of LDAP authentication responses when anonymous binds are permitted, effectively treating anonymous bind success as valid user authentication. Impact A remote, unauthenticated attacker can: * Gain unauthorized access to the Apache Druid cluster * Access sensitive data stored in Druid datasources * Execute queries and potentially manipulate data * Access administrative interfaces if the bypassed account has elevated privileges * Completely compromise the confidentiality, integrity, and availability of the Druid deployment Mitigation Immediate Mitigation (No Druid Upgrade Required): * Disable anonymous bind on your LDAP server. This prevents the vulnerability from being exploitable and is the recommended immediate action. Resolution * Upgrade Apache Druid to version 36.0.0 or later, which includes fixes to properly reject anonymous LDAP bind attempts.
Improper Input Validation vulnerability in Apache IoTDB. This issue affects Apache IoTDB: from 1.0.0 before 1.3.7, from 2.0.0 before 2.0.7. Users are recommended to upgrade to version 1.3.7 or 2.0.7, which fixes the issue.
Apache IoTDB DataNode’s internal RPC interface for creating Trigger instances uses the uploaded Trigger JAR name to build a file path without sufficient validation. If the internal DataNode RPC port is exposed to an untrusted network, an attacker may use path traversal sequences in the JAR name to write files outside the intended Trigger installation directory. This could allow arbitrary file write with the permissions of the IoTDB process. This issue affects Apache IoTDB: from 1.3.3 before 2.0.8. Users are recommended to upgrade to version 2.0.8, which fixes the issue.