COMFAST CF-XR11 V2.7.2 has a command injection vulnerability in function sub_424CB4. Attackers can send POST request messages to /usr/bin/webmgnt and inject commands into parameter iface.

A flaw has been found in Comfast CF-N1 2.6.0. Affected is the function ntp_timezone of the file /usr/bin/webmgnt. Executing manipulation of the argument timestr can lead to command injection. The attack may be launched remotely. The exploit has been published and may be used.

An issue in COMFAST CF-XR11 v.2.7.2 allows an attacker to execute arbitrary code via the destination parameter of sub_431F64 function in bin/webmgnt.

A vulnerability was detected in Comfast CF-N1 2.6.0. This impacts the function multi_pppoe of the file /usr/bin/webmgnt. Performing manipulation of the argument phy_interface results in command injection. The attack may be initiated remotely. The exploit is now public and may be used.

COMFAST CF-XR11 V2.7.2 has a command injection vulnerability detected at function sub_4143F0. Attackers can send POST request messages to /usr/bin/webmgnt and inject commands into parameter timestr.

COMFAST CF-XR11 V2.7.2 has a command injection vulnerability detected at function sub_415588. Attackers can send POST request messages to /usr/bin/webmgnt and inject commands into parameter interface and display_name.

An issue in COMFAST CF-XR11 v.2.7.2 allows an attacker to execute arbitrary code via the ifname and mac parameters in the sub_410074 function at bin/webmgnt.

A command injection vulnerability in COMFAST CF-XR11 (firmware V2.7.2) exists in the multi_pppoe API, processed by the sub_423930 function in /usr/bin/webmgnt. The phy_interface parameter is not sanitized, allowing attackers to inject arbitrary commands via a POST request to /cgi-bin/mbox-config?method=SET&section=multi_pppoe. When the action parameter is set to "one_click_redial", the unsanitized phy_interface is used in a system() call, enabling execution of malicious commands. This can lead to unauthorized access to sensitive files, execution of arbitrary code, or full device compromise.

A vulnerability was detected in Comfast CF-AC100 2.6.0.8. This affects the function sub_44AC14 of the file /cgi-bin/mbox-config?method=SET&section=ping_config of the component Request Path Handler. The manipulation results in command injection. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Comfast CF-N1 V2 2.6.0.2. The affected element is the function sub_44AC4C of the file /cgi-bin/mbox-config?method=SET&section=ptest_bandwidth. The manipulation of the argument bandwidth leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Comfast CF-E4 2.6.0.1. This impacts an unknown function of the file /cgi-bin/mbox-config?method=SET&section=ntp_timezone of the component HTTP POST Request Handler. Such manipulation of the argument timestr leads to command injection. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Comfast CF-N1 2.6.0. Affected by this vulnerability is the function ping_config of the file /usr/bin/webmgnt. The manipulation leads to command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Comfast CF-N1 2.6.0. Affected by this issue is the function update_interface_png of the file /usr/bin/webmgnt. The manipulation of the argument interface/display_name results in command injection. The attack can be executed remotely. The exploit has been made public and could be used.

A vulnerability was determined in Comfast CF-N1 2.6.0. This affects the function wifilith_delete_pic_file of the file /usr/bin/webmgnt. This manipulation of the argument portal_delete_picname causes command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was identified in Comfast CF-N1 2.6.0. This vulnerability affects the function wireless_device_dissoc of the file /usr/bin/webmgnt. Such manipulation of the argument mac leads to command injection. The attack may be performed from a remote location. The exploit is publicly available and might be used.

A vulnerability was found in Comfast CF-N1 V2 2.6.0.2. The impacted element is the function sub_44AB9C of the file /cgi-bin/mbox-config?method=SET&section=ptest_channel. The manipulation of the argument channel results in command injection. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagPingNum parameter in the setNetworkDiag function.

A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. This manipulation of the argument command causes os command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function setLanguageCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument lang leads to os command injection. The attack may be performed from remote. The exploit is publicly available and might be used.

A vulnerability classified as critical has been found in TOTOLINK CA300-PoE 6.2c.884. This affects the function QuickSetting of the file ap.so. The manipulation of the argument hour/minute leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

An issue in Open Source GPT Researcher v3.3.7 allows attackers to execute arbitrary commands on a victim system via user interaction with a crafted HTML page.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setAccessDeviceCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Performing a manipulation of the argument mac results in os command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks.

willitmerge is a command line tool to check if pull requests are mergeable. In versions 0.2.1 and prior, there is a command Injection vulnerability in willitmerge. The vulnerability manifests in this package due to the use of insecure child process execution API (exec) to which it concatenates user input, whether provided to the command-line flag, or is in user control in the target repository. At time of publication, no known fix is public.

D-Link DSL-2750B devices before 1.05 allow remote unauthenticated command injection via the login.cgi cli parameter, as exploited in the wild in 2016 through 2022.

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setWanCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument enabled leads to os command injection. The attack may be performed from remote. The exploit is publicly available and might be used.

A vulnerability was found in TOTOLINK CA300-PoE 6.2c.884. It has been declared as critical. Affected by this vulnerability is the function setUpgradeFW of the file upgrade.so. The manipulation of the argument FileName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Btrbk before 0.31.2 allows command execution because of the mishandling of remote hosts filtering SSH commands using ssh_filter_btrbk.sh in authorized_keys.

A vulnerability was found in TOTOLINK CA300-PoE 6.2c.884. It has been classified as critical. Affected is the function SetWLanApcliSettings of the file wps.so. The manipulation of the argument PIN leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Crafted MQTT messages can trigger command injection, resulting in root-level code execution on the target device.

A vulnerability was found in TOTOLINK CA300-PoE 6.2c.884. It has been rated as critical. Affected by this issue is the function setUpgradeUboot of the file upgrade.so. The manipulation of the argument FileName leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in TRENDnet TEW-432BRP 3.10B20. This impacts the function formSetRoute of the file /goform/formSetRoute. The manipulation of the argument ip/mask/gateway leads to command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor explains: "This product has been EOL for 15 years (since 2009). As the item has been EOL for such a long time, we are not able to replicate or fix any vulnerabilities." This vulnerability only affects products that are no longer supported by the maintainer.

Claude Code is an agentic coding tool. Prior to 1.0.93, Due to errors in parsing shell commands related to $IFS and short CLI flags, it was possible to bypass the Claude Code read-only validation and trigger arbitrary code execution. Reliably exploiting this requires the ability to add untrusted content into a Claude Code context window. This vulnerability is fixed in 1.0.93.

A vulnerability was found in TRENDnet TEW-432BRP 3.10B20. Affected is the function formWPS of the file /goform/formWPS. The manipulation of the argument peerPin results in command injection. The attack can be executed remotely. The exploit has been made public and could be used. The vendor explains: "This product has been EOL for 15 years (since 2009). As the item has been EOL for such a long time, we are not able to replicate or fix any vulnerabilities." This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on the D-Link DWR-932B router. qmiweb allows command injection with ` characters.

Accellion File Transfer Appliance version FTA_8_0_540 suffers from an instance of CWE-77: Improper Neutralization of Special Elements used in a Command ('Command Injection').

A remote code execution vulnerability in development mode Rails <5.2.2.1, <6.0.0.beta3 can allow an attacker to guess the automatically generated development mode secret token. This secret token can be used in combination with other Rails internals to escalate to a remote code execution exploit.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been classified as critical. Affected is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered in the lettre crate before 0.9.6 for Rust. In an e-mail message body, an attacker can place a . character after two <CR><LF> sequences and then inject arbitrary SMTP commands.

Possible Command injection Vulnerability in iManager has been discovered in OpenText™ iManager 3.2.4.0000.

The isMail transport in PHPMailer before 5.2.20 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code by leveraging improper interaction between the escapeshellarg function and internal escaping performed in the mail function in PHP. NOTE: this vulnerability exists because of an incorrect fix for CVE-2016-10033.

A command injection vulnerability in the component /api/cron/settings/setJob/ of OPNsense Community Edition before 23.7 and Business Edition before 23.4.2 allows attackers to execute arbitrary system commands.

Remote Code Execution vulnerability in Micro Focus ArcSight Enterprise Security Manager (ESM) product, affecting versions 7.0.2 through 7.5. The vulnerability could be exploited resulting in remote code execution.

A vulnerability has been found in Tenda AC6 15.03.05.19 and classified as critical. Affected by this vulnerability is the function formWriteFacMac of the file /goform/WriteFacMac of the component API Endpoint. The manipulation of the argument mac leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in Task Manager component in Synology BeePhotos before 1.0.2-10026 and 1.1.0-10053 and Synology Photos before 1.6.2-0720 and 1.7.0-0795 allows remote attackers to execute arbitrary code via unspecified vectors.

Improper Control of Generation of Code ('Code Injection'), Improper Neutralization of Special Elements used in a Command ('Command Injection'), Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in BG-TEK Informatics Security Technologies CoslatV3 allows Command Injection, Privilege Escalation. This issue affects CoslatV3: through 3.1069. NOTE: The vendor was contacted and it was learned that the product is not supported.

Eclipse Target Management: Terminal and Remote System Explorer (RSE) version <= 4.5.400 has a remote code execution vulnerability that does not require authentication. The fixed version is included in Eclipse IDE 2024-03

Shopware is an open source eCommerce platform. Versions prior to 6.4.3.1 contain a command injection vulnerability in mail agent settings. Version 6.4.3.1 contains a patch. As workarounds for older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

A vulnerability classified as critical was found in Totolink X2000R 1.0.0-B20221212.1452. Affected by this vulnerability is the function formMapDelDevice of the file /boafrm/formMapDelDevice. The manipulation of the argument macstr leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

SystemK NVR 504/508/516 versions 2.3.5SK.30084998 and prior are vulnerable to a command injection vulnerability in the dynamic domain name system (DDNS) settings that could allow an attacker to execute arbitrary commands with root privileges.

git-fastclone before 1.0.5 passes user modifiable strings directly to a shell command. An attacker can execute malicious commands by modifying the strings that are passed as arguments to "cd " and "git clone " commands in the library.