A vulnerability was determined in Comfast CF-N1 2.6.0. This affects the function wifilith_delete_pic_file of the file /usr/bin/webmgnt. This manipulation of the argument portal_delete_picname causes command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.

A security flaw has been discovered in Comfast CF-N1-S 2.6.0.1. Affected by this issue is some unknown functionality of the file /cgi-bin/mbox-config?method=SET&section=ping_config of the component Endpoint. Performing a manipulation of the argument destination results in command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Comfast CF-E7 2.6.0.9. The impacted element is the function sub_41ACCC of the file /cgi-bin/mbox-config?method=SET&section=ntp_timezone of the component webmggnt. Performing a manipulation of the argument timestr results in command injection. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Comfast CF-E7 2.6.0.9. This affects the function sub_441CF4 of the file /cgi-bin/mbox-config?method=SET&section=ping_config of the component webmggnt. Executing a manipulation of the argument destination can lead to command injection. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Comfast CF-N1 V2 2.6.0.2. The impacted element is the function sub_44AB9C of the file /cgi-bin/mbox-config?method=SET&section=ptest_channel. The manipulation of the argument channel results in command injection. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Comfast CF-N1 2.6.0. This vulnerability affects the function wireless_device_dissoc of the file /usr/bin/webmgnt. Such manipulation of the argument mac leads to command injection. The attack may be performed from a remote location. The exploit is publicly available and might be used.

A vulnerability was found in Comfast CF-N1 2.6.0. Affected by this issue is the function update_interface_png of the file /usr/bin/webmgnt. The manipulation of the argument interface/display_name results in command injection. The attack can be executed remotely. The exploit has been made public and could be used.

A vulnerability has been found in Comfast CF-N1 2.6.0. Affected by this vulnerability is the function ping_config of the file /usr/bin/webmgnt. The manipulation leads to command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

A flaw has been found in Comfast CF-N1 2.6.0. Affected is the function ntp_timezone of the file /usr/bin/webmgnt. Executing manipulation of the argument timestr can lead to command injection. The attack may be launched remotely. The exploit has been published and may be used.

A vulnerability was detected in Comfast CF-N1 2.6.0. This impacts the function multi_pppoe of the file /usr/bin/webmgnt. Performing manipulation of the argument phy_interface results in command injection. The attack may be initiated remotely. The exploit is now public and may be used.

COMFAST CF-XR11 V2.7.2 has a command injection vulnerability in function sub_424CB4. Attackers can send POST request messages to /usr/bin/webmgnt and inject commands into parameter iface.

A vulnerability has been found in Comfast CF-AC100 2.6.0.8. This affects an unknown function of the file /cgi-bin/mbox-config?method=SET&section=ntp_timezone. The manipulation leads to command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Comfast CF-AC100 2.6.0.8. This impacts an unknown function of the file /cgi-bin/mbox-config?method=SET&section=wireless_device_dissoc. The manipulation results in command injection. The attack can be executed remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Comfast CF-AC100 2.6.0.8. Affected is an unknown function of the file /cgi-bin/mbox-config?method=SET&section=update_interface_png. This manipulation causes command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Comfast CF-AC100 2.6.0.8. This affects the function sub_44AC14 of the file /cgi-bin/mbox-config?method=SET&section=ping_config of the component Request Path Handler. The manipulation results in command injection. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Comfast CF-E4 2.6.0.1. This impacts an unknown function of the file /cgi-bin/mbox-config?method=SET&section=ntp_timezone of the component HTTP POST Request Handler. Such manipulation of the argument timestr leads to command injection. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability in COMFAST CF-XR11 (firmware V2.7.2) exists in the multi_pppoe API, processed by the sub_423930 function in /usr/bin/webmgnt. The phy_interface parameter is not sanitized, allowing attackers to inject arbitrary commands via a POST request to /cgi-bin/mbox-config?method=SET&section=multi_pppoe. When the action parameter is set to "one_click_redial", the unsanitized phy_interface is used in a system() call, enabling execution of malicious commands. This can lead to unauthorized access to sensitive files, execution of arbitrary code, or full device compromise.

An issue in COMFAST CF-XR11 v.2.7.2 allows an attacker to execute arbitrary code via the protal_delete_picname parameter in the sub_41171C function at bin/webmgnt.

COMFAST CF-XR11 V2.7.2 has a command injection vulnerability detected at function sub_415588. Attackers can send POST request messages to /usr/bin/webmgnt and inject commands into parameter interface and display_name.

An issue in COMFAST CF-XR11 v.2.7.2 allows an attacker to execute arbitrary code via the ifname and mac parameters in the sub_410074 function at bin/webmgnt.

COMFAST CF-XR11 V2.7.2 has a command injection vulnerability detected at function sub_4143F0. Attackers can send POST request messages to /usr/bin/webmgnt and inject commands into parameter timestr.

An issue in COMFAST CF-XR11 v.2.7.2 allows an attacker to execute arbitrary code via the destination parameter of sub_431F64 function in bin/webmgnt.

A vulnerability has been found in Netcore NBR1005GPEV2, B6V2, COVER5, NAP830, NAP930, NBR100V2 and NBR200V2 up to 20250508 and classified as critical. This vulnerability affects the function passwd_set of the file /usr/bin/routerd of the component HTTP Header Handler. The manipulation of the argument pwd leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Linksys FGW3000-AH and FGW3000-HK up to 1.0.17.000000 and classified as critical. Affected by this issue is the function sub_4153FC of the file /cgi-bin/sysconf.cgi of the component HTTP POST Request Handler. The manipulation of the argument supplicant_rnd_id_en leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netcore NBR1005GPEV2, B6V2, COVER5, NAP830, NAP930, NBR100V2, NBR200V2 and POWER13 up to 20250508. This affects an unknown part of the file /www/cgi-bin/ of the component Query String Handler. The manipulation leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Teledyne FLIR AX8 up to 1.46.16. This vulnerability affects the function setDataTime of the file \usr\www\application\models\settingsregional.php. Performing manipulation of the argument year/month/day/hour/minute results in command injection. The attack may be initiated remotely. The exploit has been made public and could be used. Upgrading to version 1.49.16 is able to resolve this issue. Upgrading the affected component is recommended. The vendor points out: "FLIR AX8 internal web site has been refactored to be able to handle the reported vulnerabilities."

A vulnerability has been found in qianfox FoxCMS 1.2.5 and classified as critical. Affected by this vulnerability is the function batchCope of the file app/admin/controller/Article.php. The manipulation of the argument ids leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

OPNsense before 25.1.8 contains an authenticated command injection vulnerability in its Bridge Interface Edit endpoint (interfaces_bridge_edit.php). The span POST parameter is concatenated into a system-level command without proper sanitization or escaping, allowing an administrator to inject arbitrary shell operators and payloads. Successful exploitation results in remote code execution with the privileges of the web service (typically root), potentially leading to full system compromise or lateral movement. This vulnerability arises from inadequate input validation and improper handling of user-supplied data in backend command invocations.

A vulnerability was found in Netcore NBR1005GPEV2, NBR200V2 and B6V2 up to 20250508 and classified as critical. This issue affects the function tools_ping of the file /usr/bin/network_tools. The manipulation of the argument url leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in Advaya Softech GEMS ERP Portal 2.1. This affects an unknown part of the file /studentLogin/studentLogin.action. The manipulation of the argument userId leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in weibocom rill-flow 0.1.18. It has been classified as critical. Affected is an unknown function of the component Management Console. The manipulation leads to code injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in TOTOLINK N300RH 6.1c.1390_B20191101. This affects the function setUnloadUserData of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument plugin_name leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

SQLBot is an intelligent data query system based on a large language model and RAG. Versions 1.5.0 and below contain a Stored Prompt Injection vulnerability that chains three flaws: a missing permission check on the Excel upload API allowing any authenticated user to upload malicious terminology, unsanitized storage of terminology descriptions containing dangerous payloads, and a lack of semantic fencing when injecting terminology into the LLM's system prompt. Together, these flaws allow an attacker to hijack the LLM's reasoning to generate malicious PostgreSQL commands (e.g., COPY ... TO PROGRAM), ultimately achieving Remote Code Execution on the database or application server with postgres user privileges. The issue is fixed in v1.6.0.

GetSimple CMS is a content management system. In versions starting from 3.3.16 to 3.3.21, an authenticated user with access to the Edit component can inject arbitrary PHP into a component file and execute it via a crafted query string, resulting in Remote Code Execution (RCE). This issue is set to be patched in version 3.3.22.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects GC108P before 1.0.8.2, GC108PP before 1.0.8.2, GS108Tv3 before 7.0.7.2, GS110TPv3 before 7.0.7.2, GS110TPP before 7.0.7.2, GS110TUP before 1.0.5.3, GS710TUP before 1.0.5.3, GS308T before 1.0.3.2, GS310TP before 1.0.3.2, GS710TUP before 1.0.5.3, GS716TP before 1.0.4.2, GS716TPP before 1.0.4.2, GS724TPP before 2.0.6.3, GS724TPv2 before 2.0.6.3, GS724TPP before 2.0.6.3, GS728TPPv2 before 6.0.8.2, GS728TPv2 before 6.0.8.2, GS752TPv2 before 6.0.8.2, GS752TPP before 6.0.8.2, GS750E before 1.0.1.10, MS510TXM before 1.0.4.2, and MS510TXUP before 1.0.4.2.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.58, R7500v2 before 1.0.3.48, R7800 before 1.0.2.68, R8900 before 1.0.5.2, R9000 before 1.0.5.2, RAX120 before 1.0.1.108, and XR700 before 1.0.1.20.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, and RBS850 before 3.2.17.12.

A vulnerability was found in TOTOLINK N300RH 6.1c.1390_B20191101. It has been rated as critical. Affected by this issue is the function CloudACMunualUpdateUserdata of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument url leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in SourceCodester/oretnom23 Stock Management System 1.0 and classified as critical. This vulnerability affects unknown code of the file /sms/admin/?page=receiving/view_receiving&id=1. The manipulation of the argument ID leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Bohua NetDragon Firewall 1.0 and classified as critical. This issue affects some unknown processing of the file /systemstatus/ip_status.php. The manipulation of the argument subnet leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in SourceCodester/oretnom23 Stock Management System 1.0. Affected is an unknown function of the file /admin/?page=sales/view_sale. The manipulation of the argument ID leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in TOTOLINK A3002R and A3002RU 3.0.0-B20230809.1615. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7850 before 1.0.5.74, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, and RBS850 before 3.2.17.12.

A vulnerability, which was classified as critical, has been found in SourceCodester/oretnom23 Stock Management System 1.0. Affected by this issue is some unknown functionality of the file /admin/?page=back_order/view_bo. The manipulation of the argument ID leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

An issue was discovered in phpMyAdmin. A specially crafted database name could be used to run arbitrary PHP commands through the array export feature. All 4.6.x versions (prior to 4.6.4), 4.4.x versions (prior to 4.4.15.8), and 4.0.x versions (prior to 4.0.10.17) are affected.

A vulnerability was found in SourceCodester/oretnom23 Stock Management System 1.0. It has been rated as critical. This issue affects some unknown processing of the file /admin/?page=return/view_return. The manipulation of the argument ID leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.60, DM200 before 1.0.0.66, EX2700 before 1.0.1.56, EX6150v2 before 1.0.1.86, EX6200v2 before 1.0.1.86, EX6250 before 1.0.0.128, EX6400 before 1.0.2.144, EX6400v2 before 1.0.0.128, EX6410 before 1.0.0.128, EX6420 before 1.0.0.128, EX7300 before 1.0.2.144, EX7300v2 before 1.0.0.128, EX7320 before 1.0.0.128, R7500v2 before 1.0.3.46, R7800 before 1.0.2.74, R8900 before 1.0.5.26, R9000 before 1.0.5.2, RAX120 before 1.0.1.128, WN3000RPv2 before 1.0.0.78, WN3000RPv3 before 1.0.2.80, WNR2000v5 before 1.0.0.74, XR500 before 2.3.2.66, RBK20 before 2.7.3.22, RBR20 before 2.7.3.22, RBS20 before 2.7.3.22, RBK40 before 2.7.3.22, RBR40 before 2.7.3.22, and RBS40 before 2.7.3.22.