The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.
An issue was discovered in Hitachi Vantara Pentaho through 9.1 and Pentaho Business Intelligence Server through 7.x. The Security Model has different layers of Access Control. One of these layers is the applicationContext security, which is defined in the applicationContext-spring-security.xml file. The default configuration allows an unauthenticated user with no previous knowledge of the platform settings to extract pieces of information without possessing valid credentials.
cpanel/login.php in EgyPlus 7ammel (aka 7ml) 1.0.1 and earlier sends a redirect to the web browser but does not exit when the supplied credentials are incorrect, which allows remote attackers to bypass authentication by providing arbitrary username and password parameters.
DMA Softlab Radius Manager 4.4.0 assigns the same session cookie to every admin session. The cookie is valid when the admin is logged in, but is invalid (temporarily) during times when the admin is logged out. In other words, the cookie is functionally equivalent to a static password, and thus provides permanent access if stolen.
CWE-287: Improper Authentication may allow Authentication Bypass
This vulnerability allows remote attackers to reset the password of anonymous users without authorization on the affected LG LED Assistant.
Improper authentication vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to execute an arbitrary command with the root privilege via the internet.
Authentication Bypass by Alternate Name vulnerability in DTS Electronics Redline Router firmware allows Authentication Bypass.This issue affects Redline Router: before 7.17.
Improper Authentication of RemoteUI of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger unauthorized access to the product. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.
Mesa Labs AmegaView Versions 3.0 and prior’s passcode is generated by an easily reversible algorithm, which may allow an attacker to gain access to the device.
Hirschmann HiOS 07.1.01, 07.1.02, and 08.1.00 through 08.5.xx and HiSecOS 03.3.00 through 03.5.01 allow remote attackers to change the credentials of existing users.
Improper authentication vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to view device information.
An issue was discovered in Veritas Backup Exec before 21.2. It supports multiple authentication schemes: SHA authentication is one of these. This authentication scheme is no longer used in current versions of the product, but hadn't yet been disabled. An attacker could remotely exploit this scheme to gain unauthorized access to an Agent and execute privileged commands.
The N-central server is vulnerable to an authentication bypass of the user interface. This vulnerability is present in all deployments of N-central prior to 2024.2. This vulnerability was discovered through internal N-central source code review and N-able has not observed any exploitation in the wild.
Authentication vulnerability found in Etcd-io v.3.4.10 allows remote attackers to escalate privileges via the debug function.
Jupyter Scheduler is collection of extensions for programming jobs to run now or run on a schedule. The list of conda environments of `jupyter-scheduler` users maybe be exposed, potentially revealing information about projects that a specific user may be working on. This vulnerability has been patched in version(s) 1.1.6, 1.2.1, 1.8.2 and 2.5.2.
In versions 8.2.1 through 8.5.2 of Pega Infinity, the password reset functionality for local accounts can be used to bypass local authentication checks.
Hongdian H8922 3.0.5 devices have an undocumented feature that allows access to a shell as a superuser. To connect, the telnet service is used on port 5188 with the default credentials of root:superzxmn.
In Arista's MOS (Metamako Operating System) software which is supported on the 7130 product line, under certain conditions, user authentication can be bypassed when API access is enabled via the JSON-RPC APIs. This issue affects: Arista Metamako Operating System All releases in the MOS-0.1x train MOS-0.13 and post releases in the MOS-0.1x train MOS-0.26.6 and below releases in the MOS-0.2x train MOS-0.31.1 and below releases in the MOS-0.3x train
The impact of this vulnerability is that Arista's EOS eAPI may skip re-evaluating user credentials when certificate based authentication is used, which allows remote attackers to access the device via eAPI.
This vulnerability exists in GajShield Data Security Firewall firmware versions prior to v4.28 (except v4.21) due to insecure default credentials which allows remote attacker to login as superuser by using default username/password via web-based management interface and/or exposed SSH port thereby enabling remote attackers to execute arbitrary commands with administrative/superuser privileges on the targeted systems. The vulnerability has been addressed by forcing the user to change their default password to a new non-default password.
Improper Authentication vulnerability in B&R Industrial Automation B&R VC4 (VNC-Server modules). This vulnerability may allow an unauthenticated network-based attacker to bypass the authentication mechanism of the VC4 visualization on affected devices. The impact of this vulnerability depends on the functionality provided in the visualization. This issue affects B&R VC4: from 3.* through 3.96.7, from 4.0* through 4.06.7, from 4.1* through 4.16.3, from 4.2* through 4.26.8, from 4.3* through 4.34.6, from 4.4* through 4.45.1, from 4.5* through 4.45.3, from 4.7* through 4.72.9.
A vulnerability was found in SourceCodester Online Pizza Ordering System 1.0. It has been classified as critical. This affects an unknown part of the file admin/ajax.php?action=save_user of the component Password Change Handler. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The identifier VDB-223305 was assigned to this vulnerability.
A vulnerability was found in jeecg-boot 3.5.0 and classified as critical. This issue affects some unknown processing of the component API Documentation. The manipulation leads to improper authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-224699.
A vulnerability, which was classified as critical, was found in LB-LINK BL-AC1900, BL-AC2100_AZ3, BL-AC3600, BL-AX1800, BL-AX5400P and BL-WR9000 up to 20250702. Affected is the function reboot/restore of the file /cgi-bin/lighttpd.cgi of the component Web Interface. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
Authentication Bypass by Primary Weakness vulnerability in DTS Electronics Redline Router firmware allows Authentication Bypass.This issue affects Redline Router: before 7.17.
Improper Authentication vulnerability in S&D smarthome(smartcare) application can cause authentication bypass and information exposure. Remote attackers can use this vulerability to take control of the home environment including indoor control.
A vulnerability has been found in TOTOLINK T6 4.1.5cu.748_B20211015 and classified as critical. Affected by this vulnerability is the function setTelnetCfg of the file /cgi-bin/cstecgi.cgi of the component Telnet Service. The manipulation of the argument telnet_enabled with the input 1 leads to missing authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability has been identified in Polarion ALM (All versions < V2404.0). The REST API endpoints of doorsconnector of the affected product lacks proper authentication. An unauthenticated attacker could access the endpoints, and potentially execute code.
An issue in Daily Habit Tracker v.1.0 allows a remote attacker to manipulate trackers via the home.php, add-tracker.php, delete-tracker.php, update-tracker.php components.
ImpressCMS before 1.4.3 has Incorrect Access Control because include/findusers.php allows access by unauthenticated attackers (who are, by design, able to have a security token).
Lack of authentication in all versions of the fileserver component of Allegro AI’s ClearML platform allows a remote attacker to arbitrarily access, create, modify and delete files.
An authentication bypass vulnerability on D-Link DIR-850L Wireless AC1200 Dual Band Gigabit Cloud Router (Hardware Version : A1, B1; Firmware Version : 1.02-2.06) devices potentially allows attackers to bypass SharePort Web Access Portal by directly visiting /category_view.php or /folder_view.php.
A Permissions, Privileges, and Access Control vulnerability exists in Schneider Electric's Modicon M221 product (all references, all versions prior to firmware V1.6.2.0). The vulnerability allows unauthorized users to overwrite the original password with their password. If an attacker exploits this vulnerability and overwrite the password, the attacker can upload the original program from the PLC.
An issue was discovered in through SaltStack Salt before 3002.5. salt-api does not honor eauth credentials for the wheel_async client. Thus, an attacker can remotely run any wheel modules on the master.
An improper authentication vulnerability has been identified in SonicWall SonicOS SSL-VPN feature, which in specific conditions could allow a remote attacker to bypass authentication. This issue affects only firmware version SonicOS 7.1.1-7040.
A vulnerability, which was classified as critical, was found in SourceCodester Medicine Tracker System 1.0. This affects an unknown part of the file Users.php?f=save_user. The manipulation of the argument firstname/middlename/lastname/username/password leads to improper authentication. It is possible to initiate the attack remotely. The associated identifier of this vulnerability is VDB-223311.
Microsoft Exchange Server Elevation of Privilege Vulnerability
A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow retrieving of specially crafted URLs without authentication that can reveal sensitive information to an attacker.
RATCF is an open-source framework for hosting Cyber-Security Capture the Flag events. In affected versions of RATCF users with multi factor authentication enabled are able to log in without a valid token. This is fixed in commit cebb67b.
The RingCentral Communications plugin for WordPress is vulnerable to Authentication Bypass due to improper validation within the ringcentral_admin_login_2fa_verify() function in versions 1.5 to 1.6.8. This makes it possible for unauthenticated attackers to log in as any user simply by supplying identical bogus codes.
A vulnerability classified as problematic was found in Lucky LM-520-SC, LM-520-FSC and LM-520-FSC-SAM up to 20250321. Affected by this vulnerability is an unknown functionality. The manipulation leads to missing authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
omniauth-microsoft_graph provides an Omniauth strategy for the Microsoft Graph API. Prior to versions 2.0.0, the implementation did not validate the legitimacy of the `email` attribute of the user nor did it give/document an option to do so, making it susceptible to nOAuth misconfiguration in cases when the `email` is used as a trusted user identifier. This could lead to account takeover. Version 2.0.0 contains a fix for this issue.
Rubygems.org is the Ruby community's gem hosting service. Rubygems.org users with MFA enabled would normally be protected from account takeover in the case of email account takeover. However, a workaround on the forgotten password form allows an attacker to bypass the MFA requirement and takeover the account. This vulnerability has been patched in commit 0b3272a.
CWE - CWE-287: Improper Authentication vulnerability in SUSE Linux Enterprise Server 15 SP 3; openSUSE Tumbleweed allows local attackers to execute arbitrary code via salt without the need to specify valid credentials. This issue affects: SUSE Linux Enterprise Server 15 SP 3 salt versions prior to 3002.2-3. openSUSE Tumbleweed salt version 3002.2-2.1 and prior versions. This issue affects: SUSE Linux Enterprise Server 15 SP 3 salt versions prior to 3002.2-3. openSUSE Tumbleweed salt version 3002.2-2.1 and prior versions.
Azure IPAM (IP Address Management) is a lightweight solution developed on top of the Azure platform designed to help Azure customers manage their IP Address space easily and effectively. By design there is no write access to customers' Azure environments as the Service Principal used is only assigned the Reader role at the root Management Group level. Until recently, the solution lacked the validation of the passed in authentication token which may result in attacker impersonating any privileged user to access data stored within the IPAM instance and subsequently from Azure, causing an elevation of privilege. This vulnerability has been patched in version 3.0.0.
A vulnerability classified as critical has been found in code-projects Laundry System 1.0. This affects an unknown part of the file /data/. The manipulation leads to missing authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
A business logic issue in the MStore API WordPress plugin, versions before 3.2.0, had an authentication bypass with Sign In With Apple allowing unauthenticated users to recover an authentication cookie with only an email address.
Versions of INEA ME RTU firmware 3.36b and prior do not require authentication to the "root" account on the host system of the device. This could allow an attacker to obtain admin-level access to the host system.
Login with hash: The login routine allows the client to log in to the system not by using the password, but by using the hash of the password. Combined with CVE-2021-23858, this allows an attacker to subsequently login to the system.