A vulnerability was detected in D-Link DIR-605 202WWB03. Affected by this issue is some unknown functionality of the component Firmware Update Service. Performing manipulation results in command injection. The attack can be initiated remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Chengdu VEC40G 3.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /send_order.cgi?parameter=access_detect of the component Network Detection. The manipulation of the argument COUNT with the input 3 | netstat -an leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-228013 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. Roon Labs has already fixed this vulnerability in the following versions: Roon Server 2021-05-18 and later

A security vulnerability has been detected in DedeBIZ up to 6.5.9. Affected by this vulnerability is an unknown functionality of the file /src/admin/catalog_add.php. Such manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

A command injection vulnerability exists in the processAnalyticsReport method from the com.webos.service.cloudupload service on webOS version 5 through 7. A series of specially crafted requests can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability. Full versions and TV models affected: * webOS 5.5.0 - 04.50.51 running on OLED55CXPUA  * webOS 6.3.3-442 (kisscurl-kinglake) - 03.36.50 running on OLED48C1PUB  * webOS 7.3.1-43 (mullet-mebin) - 03.33.85 running on OLED55A23LA

HGiga MailSherlock query function for connection log has a vulnerability of insufficient filtering for user input. An authenticated remote attacker with administrator privilege can exploit this vulnerability to inject and execute arbitrary system commands to perform arbitrary system operation or disrupt service.

Several potential command injections vulnerabilities exist in the AT command interface of ALEOS before 4.11.0, and 4.9.4.

An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in FortiWeb version 7.0.1 and below, 6.4 all versions, version 6.3.18 and below may allow a privileged attacker to execute arbitrary bash commands via crafted cli backup parameters.

An issue was discovered in PRTG Network Monitor before 18.2.39. An attacker who has access to the PRTG System Administrator web console with administrative privileges can exploit an OS command injection vulnerability (both on the server and on devices) by sending malformed parameters in sensor or notification management scenarios.

A security vulnerability has been detected in Edimax BR-6478AC V3 1.0.15. This issue affects the function sub_416898 of the file /boafrm/formDebugDiagnosticRun. The manipulation of the argument host leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Geutebruck IP Cameras G-Code(EEC-2xxx), G-Cam(EBC-21xx/EFD-22xx/ETHC-22xx/EWPC-22xx): All versions 1.12.0.25 and prior may allow a remote authenticated user, using a specially crafted URL command, to execute commands as root.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.

Authenticated remote command injection vulnerabilities exist in the ArubaOS web-based management interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system. This allows an attacker to fully compromise the underlying operating system on the device running ArubaOS.

Authenticated remote command injection vulnerabilities exist in the ArubaOS web-based management interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system. This allows an attacker to fully compromise the underlying operating system on the device running ArubaOS.

Authenticated remote command injection vulnerabilities exist in the ArubaOS web-based management interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system. This allows an attacker to fully compromise the underlying operating system on the device running ArubaOS.

A command injection vulnerability is present in Aruba Instant that permits an authenticated administrative user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. Workaround: None. Resolution: Fixed in Aruba Instant 4.2.4.12, 6.5.4.11, 8.3.0.6, and 8.4.0.0

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

TOTOLINK-720R v4.1.5cu.374 was discovered to contain a remote code execution (RCE) vulnerability via the setTracerouteCfg function.

An OS command injection vulnerability exists in the ys_thirdparty user_delete functionality of Milesight UR32L v32.3.0.5. A specially crafted network packet can lead to command execution. An attacker can send a sequence of requests to trigger this vulnerability.

Authenticated remote command injection vulnerabilities exist in the ArubaOS web-based management interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system. This allows an attacker to fully compromise the underlying operating system on the device running ArubaOS.

A security vulnerability has been detected in UGREEN DH2100+ up to 5.3.0.251125. This impacts the function handler_file_backup_create of the file /v1/file/backup/create of the component nas_svr. The manipulation of the argument path leads to command injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. Upgrading the affected component is advised.

An os command injection vulnerability exists in the libzebra.so change_hostname functionality of Milesight UR32L v32.3.0.5. A specially-crafted network packets can lead to command execution. An attacker can send a sequence of requests to trigger this vulnerability.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

NEC Aterm devices (Aterm WF1200CR firmware Ver1.3.2 and earlier, Aterm WG1200CR firmware Ver1.3.3 and earlier, and Aterm WG2600HS firmware Ver1.5.1 and earlier) allow authenticated attackers to execute arbitrary OS commands by sending a specially crafted request to a specific URL.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

A weakness has been identified in D-Link DNS-320 2.06B01. This impacts the function cgi_set_host/cgi_set_ntp/cgi_fan_control/cgi_merge_user of the file /cgi-bin/system_mgr.cgi. This manipulation causes os command injection. It is possible to initiate the attack remotely.

A vulnerability was identified in D-Link DNS-320 2.06B01. The impacted element is the function cgi_speed/cgi_dhcpd_lease/cgi_ddns/cgi_set_ip/cgi_upnp_del/cgi_dhcpd/cgi_upnp_add/cgi_upnp_edit of the file /cgi-bin/network_mgr.cgi. The manipulation leads to os command injection. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

GoSecure on behalf of Genetec Inc. has found a flaw that allows for a remote code execution during the installation of ACAP applications on the Axis device. The application handling service in AXIS OS was vulnerable to command injection allowing an attacker to run arbitrary code. Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution.

User provided input is not sanitized in the “Settings > Access Control” configuration interface allowing for arbitrary code execution.

MAHO-PBX NetDevancer Lite/Uni/Pro/Cloud prior to Ver.1.11.00, MAHO-PBX NetDevancer VSG Lite/Uni prior to Ver.1.11.00, and MAHO-PBX NetDevancer MobileGate Home/Office prior to Ver.1.11.00 allow a remote authenticated attacker with an administrative privilege to execute an arbitrary OS command.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAMData entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAM. Data entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal, it enters a code path that continues until it reaches offset 0x0042B5C4 in the 'start_lltd' function. Within the 'start_lltd' function, a 'nvram_get' call is used to obtain the value of the user-controlled 'machine_name' NVRAM entry. This value is then entered directly into a command intended to write the host name to a file and subsequently executed.

An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_battery_mode` POST parameter.

An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_ac_mode` POST parameter parameter.

An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_normal_mode` parameter.

User provided input is not sanitized on the AXIS License Plate Verifier specific “api.cgi” allowing for arbitrary code execution.

A remote execution of arbitrary commands vulnerability was discovered in Aruba CX 6200F Switch Series, Aruba 6300 Switch Series, Aruba 6400 Switch Series, Aruba 8320 Switch Series, Aruba 8325 Switch Series, Aruba 8400 Switch Series, Aruba CX 8360 Switch Series version(s): Aruba AOS-CX firmware: 10.04.xxxx - versions prior to 10.04.3070, 10.05.xxxx - versions prior to 10.05.0070, 10.06.xxxx - versions prior to 10.06.0110, 10.07.xxxx - versions prior to 10.07.0001. Aruba has released upgrades for Aruba AOS-CX devices that address this security vulnerability.

A vulnerability was found in IdeaCMS up to 1.8. The impacted element is an unknown function of the file app/common/logic/admin/Config.php of the component Website Name Handler. Performing manipulation of the argument 网站名称 results in command injection. The attack may be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6220 before 1.1.0.64 and WNDR3700v5 before 1.1.0.54.

An OS command injection vulnerability exists in the libzebra.so bridge_group functionality of Milesight UR32L v32.3.0.5. A specially crafted network packet can lead to command execution. An attacker can send a sequence of requests to trigger this vulnerability.

An OS command injection vulnerability exists in the ys_thirdparty check_system_user functionality of Milesight UR32L v32.3.0.5. A specially crafted set of network packets can lead to command execution. An attacker can send a network request to trigger this vulnerability.

Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A weakness has been identified in EFM ipTIME C200 up to 1.092. This vulnerability affects the function sub_408F90 of the file /cgi/iux_set.cgi of the component ApplyRestore Endpoint. This manipulation of the argument RestoreFile causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. To exploit these vulnerabilities, the attacker must have valid device credentials, but does not need Administrator privileges. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device, including on the underlying operating system, which could also affect the availability of the device.