A vulnerability has been found in D-Link DAR-7000 up to 20231126 and classified as critical. This vulnerability affects unknown code of the file /user/inc/workidajax.php. The manipulation of the argument id leads to sql injection. The exploit has been disclosed to the public and may be used. VDB-247162 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

D-Link Online behavior audit gateway DAR-7000 V31R02B1413C is vulnerable to SQL Injection via /log/mailrecvview.php.

D-Link Online behavior audit gateway DAR-7000 V31R02B1413C is vulnerable to SQL Injection via /importexport.php.

Multiple SQL injection vulnerabilities in D-Link DSR-150 with firmware before 1.08B44; DSR-150N with firmware before 1.05B64; DSR-250 and DSR-250N with firmware before 1.08B44; and DSR-500, DSR-500N, DSR-1000, and DSR-1000N with firmware before 1.08B77 allow remote attackers to execute arbitrary SQL commands via the password to (1) the login.authenticate function in share/lua/5.1/teamf1lualib/login.lua or (2) captivePortal.lua.

A vulnerability classified as critical was found in D-Link DIR-880L up to 104WWb01. Affected by this vulnerability is the function sub_16570 of the file /htdocs/ssdpcgi of the component Request Header Handler. The manipulation of the argument HTTP_ST/REMOTE_ADDR/REMOTE_PORT/SERVER_ID leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DSL-320B-D1 devices through EU_1.25 are prone to multiple Stack-Based Buffer Overflows that allow unauthenticated remote attackers to take over a device via the login.xgi user and pass parameters. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

An issue was discovered in D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/addRouting route. This could lead to Command Injection via Shell Metacharacters.

D-link DIR-816 A2 v1.10 is affected by a remote code injection vulnerability. An HTTP request parameter can be used in command string construction in the handler function of the /goform/dir_setWanWifi, which can lead to command injection via shell metacharacters in the statuscheckpppoeuser parameter.

A vulnerability, which was classified as critical, has been found in D-Link DIR-600L up to 2.07B01. Affected by this issue is the function formEasySetupWizard3. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A security vulnerability has been detected in D-Link DI-8100 16.07.26A1. Affected by this vulnerability is the function url_rule_asp of the file /url_rule.asp of the component POST Parameter Handler. Such manipulation leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

A weakness has been identified in D-Link DI-8100 16.07.26A1. Affected is the function sprintf of the file /auto_reboot.asp of the component HTTP Handler. This manipulation of the argument enable/time causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was discovered in DI_8400-16.07.26A1, which has been classified as critical. This issue affects the upgrade_filter_asp function in the upgrade_filter.asp file. Manipulation of the path parameter can lead to command injection.

A vulnerability was found in D-Link DI-8100 16.07.26A1. This affects the function tgfile_htm of the file tgfile.htm of the component CGI Endpoint. The manipulation of the argument fn results in buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used.

An information disclosure vulnerability exists in the WiFi Smart Mesh functionality of D-LINK DIR-3040 1.13B03. A specially-crafted network request can lead to command execution. An attacker can connect to the MQTT service to trigger this vulnerability.

D-Link DI-8300 v16.07.26A1 is vulnerable to command injection via the msp_info_htm function.

A hard-coded password vulnerability exists in the Libcli Test Environment functionality of D-LINK DIR-3040 1.13B03. A specially crafted network request can lead to code execution. An attacker can send a sequence of requests to trigger this vulnerability.

Missing authentication for critical function in DAP-1880AC firmware version 1.21 and earlier allows a remote attacker to login to the device as an authenticated user without the access privilege via unspecified vectors.

D-Link DI-8100G 17.12.20A1 is vulnerable to Command Injection via sub47A60C function in the upgrade_filter.asp file

D-Link DIR882 DIR882A1_FW110B02 was discovered to contain a stack overflow in the sub_48AC20 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

A vulnerability was determined in D-Link DIR-820LW 2.03. Affected is the function ssdpcgi_main of the component SSDP. Executing a manipulation can lead to os command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.

D-Link DIR-878 1.02B05 is vulnerable to Incorrect Access Control.

D-Link DIR-820L 1.05B03 was discovered to contain remote command execution (RCE) vulnerability via HTTP POST to get set ccp.

An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. Authentication can be bypassed when accessing cgi modules. This allows one to perform administrative tasks (e.g., modify the admin password) with no authentication.

An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. A hard-coded account allows management-interface login with high privileges. The logged-in user can perform critical tasks and take full control of the device.

An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. A cfm UDP service listening on port 65002 allows remote, unauthenticated exfiltration of administrative credentials.

A stack-based buffer overflow was found on the D-Link DIR-842 REVC with firmware v3.13B09 HOTFIX due to the use of strcpy for LOGINPASSWORD when handling a POST request to the /MTFWU endpoint.

A vulnerability has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The impacted element is the function cgi_refresh_db/FTP_Server_BlockIP_Add/FTP_Server_BlockIP_Del of the file /cgi-bin/app_mgr.cgi. Such manipulation leads to command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The impacted element is the function cgi_set_wto of the file /cgi-bin/system_mgr.cgi. Performing a manipulation results in improper access controls. Remote exploitation of the attack is possible. The exploit is now public and may be used.

A vulnerability was identified in D-Link DIR-816 1.10CNB05. The impacted element is an unknown function of the file redirect.asp of the component goahead. The manipulation of the argument token_id leads to improper access controls. The attack may be initiated remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This impacts the function cgi_recovery/cgi_backup_now/cgi_set_schedule/cgi_set_rsync_server of the file /cgi-bin/remote_backup.cgi. The manipulation leads to command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in D-Link DIR-890L and DIR-806A1 up to 100CNb11/108B03. Affected is the function sub_175C8 of the file /htdocs/soap.cgi. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-823G 1.0.2B05_20181207. It has been rated as critical. This issue affects the function SetAutoRebootSettings/SetClientInfo/SetDMZSettings/SetFirewallSettings/SetParentsControlInfo/SetQoSSettings/SetVirtualServerSettings of the file /HNAP1/ of the component Web Management Interface. The manipulation leads to improper access controls. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A weakness has been identified in D-Link DIR-816 1.10CNB05. This impacts an unknown function of the file /goform/form2Wl5RepeaterStep2.cgi of the component goahead. This manipulation of the argument key1/key2/key3/key4/pskValue causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-600L Hardware Revision A1 (End-of-Life) contains a hardcoded telnet backdoor. The device starts a telnet daemon at boot via /bin/telnetd.sh with the username "Alphanetworks" and the static password "wrgn35_dlwbr_dir600l" read from /etc/alpha_config/image_sign. The custom telnetd binary accepts a -u user:password flag, and the custom login binary uses strcmp() to validate credentials. Successful authentication grants an unauthenticated attacker on the local network a root shell with full administrative control. The device has reached End-of-Life (EOL) and will not receive patches.

A weakness has been identified in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected by this issue is the function Local_Backup_Info of the file /cgi-bin/local_backup_mgr.cgi. This manipulation of the argument f_idx causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A security vulnerability has been detected in D-Link DIR-816 1.10CNB05. Affected is an unknown function of the file /goform/form2WlanBasicSetup.cgi of the component goahead. Such manipulation of the argument pskValue leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-456U Hardware Revision A1 (End-of-Life, EOL) contains a hardcoded telnet backdoor. The device starts a telnet daemon at boot via /etc/init0.d/S80telnetd.sh with the username "Alphanetworks" and the static password "whdrv01_dlob_dir456U" read from /etc/config/image_sign. The custom telnetd binary accepts a -u user:password flag, and the custom login binary uses strcmp() to validate credentials. Successful authentication grants an unauthenticated attacker on the local network a root shell with full administrative control. The device has reached End-of-Life (EOL) and will not receive patches.

A vulnerability was detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This vulnerability affects the function cgi_myfavorite_del_user/cgi_myfavorite_verify of the file /cgi-bin/gui_mgr.cgi. Performing a manipulation results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The affected element is the function cgi_myfavorite_add/cgi_myfavorite_set/cgi_myfavorite_del/cgi_myfavorite_set_sort_info/cgi_myfavorite_remove_apkg/cgi_myfavorite_compare_apkg/cgi_mycloud_auto_downlaod of the file /cgi-bin/gui_mgr.cgi. This manipulation of the argument f_user causes command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used.

A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This issue affects the function UPnP_AV_Server_Path_Setting of the file /cgi-bin/app_mgr.cgi. Executing a manipulation can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used.

A security flaw has been discovered in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected by this vulnerability is the function cgi_tm_set_share of the file /cgi-bin/time_machine.cgi. The manipulation of the argument Name results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A security vulnerability has been detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This affects the function Downloads_Schedule_Info of the file /cgi-bin/download_mgr.cgi. Such manipulation leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

D-Link DCH-M225 1.05b01 and earlier devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the spotifyConnect.php userName parameter.

D-Link DIR-605L Hardware Revision B2 (End-of-Life, EOL) contains a hardcoded telnet backdoor. The device starts a telnet daemon at boot via /bin/telnetd.sh with the username "Alphanetworks" and the static password "wrgn76_dlwbr_dir605L" read from /etc/alpha_config/image_sign. The custom telnetd binary accepts a -u user:password flag, and the custom login binary uses strcmp() to validate credentials. Successful authentication grants an unauthenticated attacker on the local network a root shell with full administrative control. The device has reached End-of-Life (EOL) and will not receive patches.

A security flaw has been discovered in D-Link DIR-816 1.10CNB05. This affects an unknown function of the file /goform/form2RepeaterStep2.cgi of the component goahead. The manipulation of the argument key1/key2/key3/key4/pskValue results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This affects an unknown function of the file /cgi-bin/wizard_mgr.cgi. Executing a manipulation can lead to command injection. The attack can be executed remotely. The exploit has been published and may be used.