Dell EMC Unity OE versions 4.3.0.x and 4.3.1.x and UnityVSA OE versions 4.3.0.x and 4.3.1.x contains an Incorrect File Permissions vulnerability. A locally authenticated malicious user could potentially exploit this vulnerability to alter multiple library files in service tools that might result in arbitrary code execution with elevated privileges. No user file systems are directly affected by this vulnerability.

A vulnerability has been identified in SIMATIC STEP 7 (TIA Portal) and WinCC (TIA Portal) V10, V11, V12 (All versions), SIMATIC STEP 7 (TIA Portal) and WinCC (TIA Portal) V13 (All versions < V13 SP2 Update 2), SIMATIC STEP 7 (TIA Portal) and WinCC (TIA Portal) V14 (All versions < V14 SP1 Update 6), SIMATIC STEP 7 (TIA Portal) and WinCC (TIA Portal) V15 (All versions < V15 Update 2). Improper file permissions in the default installation of TIA Portal may allow an attacker with local file system access to insert specially crafted files which may prevent TIA Portal startup (Denial-of-Service) or lead to local code execution. No special privileges are required, but the victim needs to attempt to start TIA Portal after the manipulation.

The AsrDrv101.sys and AsrDrv102.sys low-level drivers in ASRock RGBLED before v1.0.35.1, A-Tuning before v3.0.210, F-Stream before v3.0.210, and RestartToUEFI before v1.0.6.2 expose functionality to read and write CR register values. This could be leveraged in a number of ways to ultimately run code with elevated privileges.

This vulnerability allows local attackers to escalate privileges on vulnerable installations of ABB MicroSCADA 9.3 with FP 1-2-3. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the configuration of the access controls for the installed product files. The installation procedure leaves critical files open to manipulation by any authenticated user. An attacker can leverage this vulnerability to escalate privileges to SYSTEM. Was ZDI-CAN-5097.

In sendBugreportNotification of BugreportProgressService.java, there is a possible permission bypass due to an unsafe PendingIntent. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-178803845

In onReceive of BluetoothPermissionRequest.java, there is a possible permissions bypass due to a mutable PendingIntent. This could lead to local escalation of privilege that bypasses a permission check, with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-9 Android-10 Android-11 Android-8.1Android ID: A-158219161

Windscribe 1.81 creates a named pipe with a NULL DACL that allows Everyone users to gain privileges or cause a denial of service via \\.\pipe\WindscribeService.

Insecure inherited permissions for the Intel(R) NUC M15 Laptop Kit Driver Pack software before updated version 1.1 may allow an authenticated user to potentially enable escalation of privilege via local access.

In getMediaOutputSliceAction of RemoteMediaSlice.java, there is a possible permission bypass due to an unsafe PendingIntent. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-174047735

Incorrect Permission Assignment on the /var/www/xms/cleanzip.sh shell script run periodically in Dialogic PowerMedia XMS through 3.5 allows local users to execute code as the root user.

Insecure inherited permissions for some Intel(R) NUC 9 Extreme Laptop Kit LAN Drivers before version 10.42 may allow an authenticated user to potentially enable escalation of privilege via local access.

A vulnerability has been identified in Xpedition Designer VX.2.10 (All versions < VX.2.10 Update 13), Xpedition Designer VX.2.11 (All versions < VX.2.11 Update 11), Xpedition Designer VX.2.12 (All versions < VX.2.12 Update 5), Xpedition Designer VX.2.13 (All versions < VX.2.13 Update 1). The affected application assigns improper access rights to the service executable. This could allow an authenticated local attacker to inject arbitrary code and escalate privileges.

Insecure inherited permissions for the Intel(R) SOC driver package for STK1A32SC before version 604 may allow an authenticated user to potentially enable escalation of privilege via local access.

On F5 BIG-IP APM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, as well as F5 BIG-IP APM Clients 7.x versions prior to 7.2.1.5, the BIG-IP Edge Client Component Installer Service does not use best practice while saving temporary files. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

In onTargetSelected of ResolverActivity.java, there is a possible settings bypass allowing an app to become the default handler for arbitrary domains. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-8.1 Android-9 Android-10 Android-11Android ID: A-163358811

Golden Frog VyprVPN 2.12.1.8015 for Windows suffers from a SYSTEM privilege escalation vulnerability through the "VyprVPN" service. This service establishes a NetNamedPipe endpoint that allows applications to connect and call publicly exposed methods. The "SetProperty" method allows an attacker to configure the "AdditionalOpenVpnParameters" property and control the OpenVPN command line. Using the OpenVPN "plugin" parameter, an attacker may specify a dynamic library plugin that should run for every new VPN connection attempt. This plugin will execute code in the context of the SYSTEM user. This attack may be conducted using "VyprVPN Free" account credentials and the VyprVPN Desktop Client.

Insecure inherited permissions in the Intel(R) PROSet/Wireless WiFi software installer for Windows 10 before version 22.40 may allow an authenticated user to potentially enable escalation of privilege via local access.

Insecure permissions configuration in Adaware Protect v1.2.439.4251 allows attackers to escalate privileges via changing the service binary path.

Local privilege escalation due to insecure folder permissions. The following products are affected: Acronis Cyber Protect Cloud Agent (Windows) before build 40734.

Insufficient folder permissions used by system functions in ABB System 800xA Base (version 6.1 and earlier) allow low privileged users to read, modify, add and delete system and application files. An authenticated attacker who successfully exploit the vulnerabilities could escalate his/her privileges, cause system functions to stop and to corrupt user applications.

PyInstaller bundles a Python application and all its dependencies into a single package. A PyInstaller built application, elevated as a privileged process, may be tricked by an unprivileged attacker into deleting files the unprivileged user does not otherwise have access to. A user is affected if **all** the following are satisfied: 1. The user runs an application containing either `matplotlib` or `win32com`. 2. The application is ran as administrator (or at least a user with higher privileges than the attacker). 3. The user's temporary directory is not locked to that specific user (most likely due to `TMP`/`TEMP` environment variables pointing to an unprotected, arbitrary, non default location). Either: A. The attacker is able to very carefully time the replacement of a temporary file with a symlink. This switch must occur exactly between `shutil.rmtree()`'s builtin symlink check and the deletion itself B: The application was built with Python 3.7.x or earlier which has no protection against Directory Junctions links. The vulnerability has been addressed in PR #7827 which corresponds to `pyinstaller >= 5.13.1`. Users are advised to upgrade. There are no known workarounds for this vulnerability.

SaferVPN 4.2.5 for Windows suffers from a SYSTEM privilege escalation vulnerability in its "SaferVPN.Service" service. The "SaferVPN.Service" service executes "openvpn.exe" using OpenVPN config files located within the current user's %LOCALAPPDATA%\SaferVPN\OvpnConfig directory. An authenticated attacker may modify these configuration files to specify a dynamic library plugin that should run for every new VPN connection attempt. This plugin will execute code in the context of the SYSTEM user.

An issue was discovered in Wing FTP Server 6.2.5 before February 2020. Due to insecure permissions when handling session cookies, a local user may view the contents of the session and session_admin directories, which expose active session cookies within the Wing FTP HTTP interface and administration panel. These cookies may be used to hijack user and administrative sessions, including the ability to execute Lua commands as root within the administration panel.

Wing FTP Server v6.2.3 for Linux, macOS, and Solaris sets insecure permissions on installation directories and configuration files. This allows local users to arbitrarily create FTP users with full privileges, and escalate privileges within the operating system by modifying system files.

A vulnerability has been identified in SINEC NMS (All versions < V2.0). The affected application assigns improper access rights to specific folders containing executable files and libraries. This could allow an authenticated local attacker to inject arbitrary code and escalate privileges.

On Unix systems (Linux, MacOS), Arc uses a temporary file with unsafe privileges. By tampering with such file, a malicious local user in the system may be able to trigger arbitrary code execution with root privileges.

Insecure inherited permissions in the Intel(R) oneAPI Toolkits oneapi-cli before version 0.2.0 may allow an authenticated user to potentially enable escalation of privilege via local access.

The Windows Kernel API in Windows 8.1 and RT 8.1, Windows Server 2012 and R2, Windows 10 Gold, 1511, 1607, 1703 and 1709, Windows Server 2016 and Windows Server, version 1709 allows an elevation of privilege vulnerability due to the way the Kernel API enforces permissions, aka "Windows Elevation of Privilege Vulnerability". This CVE ID is unique from CVE-2018-0751.

An improper access control vulnerability exists in Schneider Electric's U.motion Builder software versions 1.2.1 and prior in which an improper handling of the system configuration can allow an attacker to execute arbitrary code under the context of root.

Synaman v5.1 and below was discovered to contain weak file permissions which allows authenticated attackers to escalate privileges.

Privilege Escalation Vulnerability in the installer in McAfee Data Exchange Layer (DXL) Client for Mac shipped with McAfee Agent (MA) for Mac prior to MA 5.6.6 allows local users to run commands as root via incorrectly applied permissions on temporary files.

The Xamarin.iOS update component on systems running macOS allows an attacker to run arbitrary code as root, aka "Xamarin.iOS Elevation Of Privilege Vulnerability."

On NGINX Controller versions 3.1.0-3.3.0, AVRD uses world-readable and world-writable permissions on its socket, which allows processes or users on the local system to write arbitrary data into the socket. A local system attacker can make AVRD segmentation fault (SIGSEGV) by writing malformed messages to the socket.

Nessus 6.10.x before 6.10.5 was found to be vulnerable to a local privilege escalation issue due to insecure permissions when running in Agent Mode.

Under certain conditions the SAP Adaptive Server Enterprise, version 16.0, allows an attacker to access encrypted sensitive and confidential information through publicly readable installation log files leading to a compromise of the installed Cockpit. This compromise could enable the attacker to view, modify and/or make unavailable any data associated with the Cockpit, leading to Information Disclosure.

Dell Encryption versions prior to 10.8 and Dell Endpoint Security Suite versions prior to 2.8 contain a privilege escalation vulnerability because of an incomplete fix for CVE-2020-5358. A local malicious user with low privileges could potentially exploit this vulnerability to gain elevated privilege on the affected system with the help of a symbolic link.

The SysDrv3S driver in the CODESYS Control runtime system on Microsoft Windows allows any system user to read and write within restricted memory space.

VMware Workspace ONE Access, Identity Manager and vRealize Automation contain a privilege escalation vulnerability due to improper permissions in support scripts. A malicious actor with local access can escalate privileges to 'root'.

An issue was discovered in Mullvad VPN Windows app before 2023.6-beta1. Insufficient permissions on a directory allow any local unprivileged user to escalate privileges to SYSTEM.

IBM Platform LSF 9.1 and 10.1, IBM Spectrum LSF Suite 10.2, and IBM Spectrum Suite for HPA 10.2 could allow a local user to escalate their privileges due to weak file permissions when specific debug settings are enabled in a Linux or Unix enviornment. IBM X-Force ID: 176137.

'Root Service' service implemented in the following Yokogawa Electric products creates some named pipe with improper ACL configuration. CENTUM CS 3000 versions from R3.08.10 to R3.09.00, CENTUM VP versions from R4.01.00 to R4.03.00, from R5.01.00 to R5.04.20, and from R6.01.00 to R6.08.00, Exaopc versions from R3.72.00 to R3.79.00.

'Long-term Data Archive Package' service implemented in the following Yokogawa Electric products creates some named pipe with imporper ACL configuration. CENTUM CS 3000 versions from R3.08.10 to R3.09.00, CENTUM VP versions from R4.01.00 to R4.03.00, from R5.01.00 to R5.04.20, and from R6.01.00 to R6.08.00, Exaopc versions from R3.72.00 to R3.79.00.

Linux Guest VMs running on VMware Workstation (15.x before 15.5.2) and Fusion (11.x before 11.5.2) contain a local privilege escalation vulnerability due to improper file permissions in Cortado Thinprint. Local attackers with non-administrative access to a Linux guest VM with virtual printing enabled may exploit this issue to elevate their privileges to root on the same guest VM.

The I2O Utility Filter driver (i2omgmt.sys) 5.1.2600.2180 for Microsoft Windows XP sets Everyone/Write permissions for the "\\.\I2OExc" device interface, which allows local users to gain privileges. NOTE: this issue can be leveraged to overwrite arbitrary memory and execute code via an IOCTL call with a crafted DeviceObject pointer.

VMware Horizon Client for Windows (prior to 5.4.3) contains a privilege escalation vulnerability due to folder permission configuration and unsafe loading of libraries. A local user on the system where the software is installed may exploit this issue to run commands as any user.

IBM Security Guardium 11.3, 11.4, 11.5, and 12.0 could allow a local user to gain elevated privileges on the system due to improper permissions control. IBM X-Force ID: 271527.

In addOrUpdateNetwork of WifiServiceImpl.java, there is a possible way for a guest user to configure Wi-Fi due to a permissions bypass. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-221859734

Local privilege escalation due to insecure folder permissions. The following products are affected: Acronis VSS Doctor (Windows) before build 53

Incorrect Permission Assignment for Critical Resource in GitHub repository zerotier/zerotierone prior to 1.8.8. Local Privilege Escalation

Confd log files contain local users', including root’s, SHA512crypt password hashes with insecure access permissions. This allows a local attacker to attempt off-line brute-force attacks against these password hashes in Sophos UTM before version 9.710.