Uncontrolled Resource Consumption vulnerability in Apache Tomcat if an HTTP/2 client did not acknowledge the initial settings frame that reduces the maximum permitted concurrent streams. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.8, from 10.1.0-M1 through 10.1.42, from 9.0.0.M1 through 9.0.106. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 through 8.5.100. Users are recommended to upgrade to version 11.0.9, 10.1.43 or 9.0.107, which fix the issue.

Zimbra Collaboration (ZCS) before 9.0.0 Patch 46, 10.0.x before 10.0.15, and 10.1.x before 10.1.9 is vulnerable to a denial of service condition due to improper handling of excessive, comma-separated path segments in the Admin Console. An unauthenticated remote attacker can send specially crafted GET requests that trigger redundant processing and inflated responses. This leads to uncontrolled resource consumption, resulting in denial of service.

A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. This vulnerability is due to insufficient resource management when establishing TLS/SSL sessions. An attacker could exploit this vulnerability by sending a series of crafted TLS/SSL messages to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

Uncontrolled resource consumption in Windows Remote Desktop Services allows an unauthorized attacker to deny service over a network.

cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. In version 0.21.0, when many http headers fields are passed in, the library does not limit the number of headers, and the memory associated with the headers will not be released when the connection is disconnected. This leads to potential exhaustion of system memory and results in a server crash or unresponsiveness. Version 0.22.0 contains a patch for the issue.

MaterialX is an open standard for the exchange of rich material and look-development content across applications and renderers. In version 1.39.2, nested imports of MaterialX files can lead to a crash via stack memory exhaustion, due to the lack of a limit on the "import chain" depth. When parsing file imports, recursion is used to process nested files; however, there is no limit imposed to the depth of files that can be parsed by the library. By building a sufficiently deep chain of MaterialX files one referencing the next, it is possible to crash the process using the MaterialX library via stack exhaustion. This is fixed in version 1.39.3.

mod_auth_openidc 2.4.0 to 2.4.7 allows a remote attacker to cause a denial-of-service (DoS) condition via unspecified vectors.

A flaw was found in StarWind iSCSI target. An attacker could script standard iSCSI Initiator operation(s) to exhaust the StarWind service socket, which could lead to denial of service. This affects iSCSI SAN (Windows Native) Version 3.2.2 build 2007-02-20.

ESI plugin does not have the limit for maximum inclusion depth, and that allows excessive memory consumption if malicious instructions are inserted. Users can use a new setting for the plugin (--max-inclusion-depth) to limit it. This issue affects Apache Traffic Server: from 10.0.0 through 10.0.5, from 9.0.0 through 9.2.10. Users are recommended to upgrade to version 9.2.11 or 10.0.6, which fixes the issue.

Linux kernel versions 4.9+ can be forced to make very expensive calls to tcp_collapse_ofo_queue() and tcp_prune_ofo_queue() for every incoming packet which can lead to a denial of service.

Uncontrolled resource consumption in Windows Netlogon allows an unauthorized attacker to deny service over a network.

parisneo/lollms-webui is vulnerable to a denial of service (DoS) attack due to uncontrolled resource consumption. Attackers can exploit the `/open_code_in_vs_code` and similar endpoints without authentication by sending repeated HTTP POST requests, leading to the opening of Visual Studio Code or the default folder opener (e.g., File Explorer, xdg-open) multiple times. This can render the host machine unusable by exhausting system resources. The vulnerability is present in the latest version of the software.

The Linux kernel, versions 3.9+, is vulnerable to a denial of service attack with low rates of specially modified packets targeting IP fragment re-assembly. An attacker may cause a denial of service condition by sending specially crafted IP fragments. Various vulnerabilities in IP fragmentation have been discovered and fixed over the years. The current vulnerability (CVE-2018-5391) became exploitable in the Linux kernel with the increase of the IP fragment reassembly queue size.

A prototype pollution attack in cached-path-relative versions <=1.0.1 allows an attacker to inject properties on Object.prototype which are then inherited by all the JS objects through the prototype chain causing a DoS attack.

jadedown is vulnerable to regular expression denial of service (ReDoS) when certain types of user input is passed in.

Cloudflare Quiche (through version 0.19.1/0.20.0) was affected by an unlimited resource allocation vulnerability causing rapid increase of memory usage of the system running quiche server or client. A remote attacker could take advantage of this vulnerability by repeatedly sending an unlimited number of 1-RTT CRYPTO frames after previously completing the QUIC handshake. Exploitation was possible for the duration of the connection which could be extended by the attacker.  quiche 0.19.2 and 0.20.1 are the earliest versions containing the fix for this issue.

A vulnerability in the Cisco IOx Application Framework of Cisco 809 Industrial Integrated Services Routers (Industrial ISRs), Cisco 829 Industrial ISRs, Cisco CGR 1000 Compute Module, and Cisco IC3000 Industrial Compute Gateway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling during packet processing. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the IOx web server on an affected device. A successful exploit could allow the attacker to cause the IOx web server to stop processing requests, resulting in a DoS condition.

nginx before versions 1.15.6 and 1.14.1 has a vulnerability in the implementation of HTTP/2 that can allow for excessive memory consumption. This issue affects nginx compiled with the ngx_http_v2_module (not compiled by default) if the 'http2' option of the 'listen' directive is used in a configuration file.

jshamcrest is vulnerable to regular expression denial of service (ReDoS) when certain types of user input is passed in to the emailAddress validator.

A buffer overflow vulnerability has been discovered in Netis WF2880 v2.1.40207 in the FUN_00470c50 function of the cgitest.cgi file. Attackers can trigger this vulnerability by controlling the value of wl_mac_filter_set in the payload, which can cause the program to crash and lead to a Denial of Service (DoS) attack.

Zoho ManageEngine ServiceDesk Plus through 14104, Asset Explorer through 6987, ServiceDesk Plus MSP before 14000, and Support Center Plus before 14000 allow Denial-of-Service (DoS).

Uncontrolled resource consumption vulnerability in Mitsubishi Electoric FA Engineering Software (CPU Module Logging Configuration Tool Ver. 1.94Y and earlier, CW Configurator Ver. 1.010L and earlier, EM Software Development Kit (EM Configurator) Ver. 1.010L and earlier, GT Designer3 (GOT2000) Ver. 1.221F and earlier, GX LogViewer Ver. 1.96A and earlier, GX Works2 Ver. 1.586L and earlier, GX Works3 Ver. 1.058L and earlier, M_CommDTM-HART Ver. 1.00A, M_CommDTM-IO-Link Ver. 1.02C and earlier, MELFA-Works Ver. 4.3 and earlier, MELSEC-L Flexible High-Speed I/O Control Module Configuration Tool Ver.1.004E and earlier, MELSOFT FieldDeviceConfigurator Ver. 1.03D and earlier, MELSOFT iQ AppPortal Ver. 1.11M and earlier, MELSOFT Navigator Ver. 2.58L and earlier, MI Configurator Ver. 1.003D and earlier, Motion Control Setting Ver. 1.005F and earlier, MR Configurator2 Ver. 1.72A and earlier, MT Works2 Ver. 1.156N and earlier, RT ToolBox2 Ver. 3.72A and earlier, and RT ToolBox3 Ver. 1.50C and earlier) allows an attacker to cause a denial of service (DoS) condition attacks via unspecified vectors.

Uncontrolled Resource Consumption vulnerability in Honeywell Niagara Framework on Windows, Linux, QNX allows Content Spoofing.This issue affects Niagara Framework: before Niagara AX 3.8.1, before Niagara 4.1.

Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines() method would not "pause" writing and signal to the Protocol to drain the buffer to the wire once the write buffer reached the "high-water mark". Because of this, Protocols would not periodically drain the write buffer potentially leading to memory exhaustion. This vulnerability likely impacts a small number of users, you must be using Python 3.12.0 or later, on macOS or Linux, using the asyncio module with protocols, and using .writelines() method which had new zero-copy-on-write behavior in Python 3.12.0 and later. If not all of these factors are true then your usage of Python is unaffected.

A vulnerability in the SSH service of the Cisco StarOS operating system could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to a logic error that may occur under specific traffic conditions. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to prevent the targeted service from receiving any traffic, which would lead to a DoS condition on the affected device.

Diamond through 3.0.1.2 (a chain-based proof-of-stake cryptocurrency) allows a remote denial of service, exploitable by an attacker who acquires even a small amount of stake/coins in the system. The attacker sends invalid headers/blocks, which are stored on the victim's disk.

navcoin through 4.3.0 (a chain-based proof-of-stake cryptocurrency) allows a remote denial of service. The attacker sends invalid headers/blocks. The attack requires no stake and can fill the victim's disk and RAM.

peercoin through 0.6.4 (a chain-based proof-of-stake cryptocurrency) allows a remote denial of service, exploitable by an attacker who acquires even a small amount of stake/coins in the system. The attacker sends invalid headers/blocks, which are stored on the victim's disk.

A vulnerability in the cryptographic hardware accelerator driver of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the affected devices have a limited amount of Direct Memory Access (DMA) memory and the affected software improperly handles resources in low-memory conditions. An attacker could exploit this vulnerability by sending a sustained, high rate of malicious traffic to an affected device to exhaust memory on the device. A successful exploit could allow the attacker to exhaust DMA memory on the affected device, which could cause the device to reload and result in a temporary DoS condition.

An out-of-memory error in the parseABC_NS_SET_INFO function of libming v0.4.8 allows attackers to cause a Denial of Service (DoS) due to allocator exhaustion.

ansi2html is vulnerable to regular expression denial of service (ReDoS) when certain types of user input is passed in.

A vulnerability, which was classified as problematic, has been found in Tongda OA 2017 up to 11.7. This issue affects some unknown processing of the file /inc/package_static_resources.php. The manipulation leads to resource consumption. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered in Mattermost Server before 1.2.0. It allows attackers to cause a denial of service (memory consumption) via a small compressed file that has a large size when uncompressed.

There exists a stack buffer overflow in libjxl. A specifically-crafted file can cause the JPEG XL decoder to use large amounts of stack space (up to 256mb is possible, maybe 512mb), potentially exhausting the stack. An attacker can craft a file that will cause excessive memory usage. We recommend upgrading past commit 65fbec56bc578b6b6ee02a527be70787bbd053b0.

Uncontrolled resource consumption vulnerability in SE-elektronic GmbH E-DDC3.3 affecting versions 03.07.03 and higher. An attacker could interrupt the availability of the administration panel by sending multiple ICMP packets.

By sending a specially crafted push message, a remote server could have hung the parent process, causing the browser to become unresponsive. This vulnerability affects Firefox < 132, Firefox ESR < 128.4, Thunderbird < 128.4, and Thunderbird < 132.

On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPC (Modular Port Concentrator) where Integrated Routing and Bridging (IRB) interface is configured and it is mapped to a VPLS instance or a Bridge-Domain, certain network events at Customer Edge (CE) device may cause memory leak in the MPC which can cause an out of memory and MPC restarts. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). Please refer to https://kb.juniper.net/KB25385 for the list of Trio-based PFEs. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3R3-S8; 17.4R3-S2; 18.2R3-S4, 18.2R3-S5; 18.3R3-S2, 18.3R3-S3; 18.4 versions starting from 18.4R3-S1 and later versions prior to 18.4R3-S6; 19.2 versions starting from 19.2R2 and later versions prior to 19.2R3-S1; 19.4 versions starting from 19.4R2 and later versions prior to 19.4R2-S3, 19.4R3; 20.2 versions starting from 20.2R1 and later versions prior to 20.2R1-S3, 20.2R2. This issue does not affect Juniper Networks Junos OS: 18.1, 19.1, 19.3, 20.1.

User-controlled operations could have allowed Denial of Service in M-Files Server before 23.4.12528.1 due to uncontrolled memory consumption.

Sympa 6.2.38 through 6.2.52 allows remote attackers to cause a denial of service (disk consumption from temporary files, and a flood of notifications to listmasters) via a series of requests with malformed parameters.

CNCF Envoy through 1.13.0 may consume excessive amounts of memory when responding internally to pipelined requests.

Apache ATS 6.0.0 to 6.2.3, 7.0.0 to 7.1.9, and 8.0.0 to 8.0.6 is vulnerable to a HTTP/2 slow read attack.

An issue was discovered in iPortalis iCS 7.1.13.0. Attackers can send a sequence of requests to rapidly cause .NET Input Validation errors. This increases the size of the log file on the remote server until memory is exhausted, therefore consuming the maximum amount of resources (triggering a denial of service condition).

Citrix ADC and Citrix Gateway 13.0 before 13.0-64.35, Citrix ADC and NetScaler Gateway 12.1 before 12.1-58.15, Citrix ADC 12.1-FIPS before 12.1-55.187, Citrix ADC and NetScaler Gateway 12.0, Citrix ADC and NetScaler Gateway 11.1 before 11.1-65.12, Citrix SD-WAN WANOP 11.2 before 11.2.1a, Citrix SD-WAN WANOP 11.1 before 11.1.2a, Citrix SD-WAN WANOP 11.0 before 11.0.3f, Citrix SD-WAN WANOP 10.2 before 10.2.7b are vulnerable to a denial of service attack originating from the management network.

A Node.js application that allows an attacker to trigger a DNS request for a host of their choice could trigger a Denial of Service in versions < 15.2.1, < 14.15.1, and < 12.19.1 by getting the application to resolve a DNS record with a larger number of responses. This is fixed in 15.2.1, 14.15.1, and 12.19.1.

All versions of package djvalidator are vulnerable to Regular Expression Denial of Service (ReDoS) by sending crafted invalid emails - for example, --@------------------------------------------------------------------------------------------------------------------------!.

The package ua-parser-js before 0.7.22 are vulnerable to Regular Expression Denial of Service (ReDoS) via the regex for Redmi Phones and Mi Pad Tablets UA.

all versions of url-regex are vulnerable to Regular Expression Denial of Service. An attacker providing a very long string in String.test can cause a Denial of Service.

Prototype pollution vulnerability in fastify-multipart < 1.0.5 allows an attacker to crash fastify applications parsing multipart requests by sending a specially crafted request.

The _encode_invalid_chars function in util/url.py in the urllib3 library 1.25.2 through 1.25.7 for Python allows a denial of service (CPU consumption) because of an inefficient algorithm. The percent_encodings array contains all matches of percent encodings. It is not deduplicated. For a URL of length N, the size of percent_encodings may be up to O(N). The next step (normalize existing percent-encoded bytes) also takes up to O(N) for each step, so the total time is O(N^2). If percent_encodings were deduplicated, the time to compute _encode_invalid_chars would be O(kN), where k is at most 484 ((10+6*2)^2).