Vulnerability in rconfig “remote_text_file” enables an attacker with user level access to the CLI to inject user level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “update_checkfile” value for the “filename” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

Atos Unify OpenScape 4000 Platform V10 R1 before Hotfix V10 R1.42.2 and 4000 and Manager Platform V10 R1 before Hotfix V10 R1.42.2 allow command injection by an authenticated attacker into the platform operating system, leading to administrative access via the webservice. This is also known as OSFOURK-24120.

Improper neutralization of special elements used in a command ('Command Injection') vulnerability in File service functionality in Synology DiskStation Manager (DSM) before 6.2.4-25556-2 allows remote authenticated users to execute arbitrary commands via unspecified vectors.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. The software constructs part of a command using external input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands.

TPLINK TL-ER5120G 4.0 2.0.0 Build 210817 Rel.80868n has a command injection vulnerability, when an attacker adds ACL rules after authentication, and the rule name parameter has injection points.

A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution.

The ping_from parameter of ping_tracerte.cgi in the web UI of Telstra Smart Modem Gen 2 (Arcadyan LH1000), firmware versions < 0.18.15r, was not properly sanitized before being used in a system call, which could allow an authenticated attacker to achieve command injection as root on the device. 

An authenticated mySCADA myPRO 8.26.0 user may be able to modify parameters to run commands directly in the operating system.

ZPE Systems, Inc Nodegrid OS v5.0.0 to v5.0.17, v5.2.0 to v5.2.19, v5.4.0 to v5.4.16, v5.6.0 to v5.6.13, v5.8.0 to v5.8.10, and v5.10.0 to v5.10.3 was discovered to contain a command injection vulnerability via the endpoint /v1/system/toolkit/files/.

A vulnerability in the web management interface of the Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The vulnerability is due to insufficient validation of user-supplied parameters for certain API endpoints. An attacker could exploit this vulnerability by sending crafted input to an affected API endpoint. A successful exploit could allow an attacker to execute arbitrary commands on the device with low system privileges. To successfully exploit this vulnerability, an attacker would need valid credentials for a user with Device permissions: by default, only Administrators, Security Approvers and Network Admins user accounts have these permissions.

IBM Security Identity Manager Virtual Appliance 6.0 and 7.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 127394.

Command injection in homemng.htm in Juplink RX4-1500 versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows remote authenticated attackers to execute commands via specially crafted requests to the vulnerable endpoint.

Mattermost versions 10.4.x <= 10.4.2, 10.3.x <= 10.3.3, 9.11.x <= 9.11.8 fail to restrict command execution in archived channels, which allows authenticated users to run commands in archived channels.

Command injection vulnerability in the homemng.htm endpoint in Juplink RX4-1500 Wifi router firmware versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows authenticated remote attackers to execute commands as root via specially crafted HTTP requests to the vulnerable endpoint.

Command Injection Vulnerability in GitHub repository hestiacp/hestiacp prior to 1.5.12. An authenticated remote attacker with low privileges can execute arbitrary code under root context.

An issue was discovered in Atos Unify OpenScape Voice Trace Manager V8 before V8 R0.9.11. It allows authenticated command injection via ftp.

In Splunk Enterprise versions below 8.2.12, 9.0.6, and 9.1.1, an attacker can create an external lookup that calls a legacy internal function. The attacker can use this internal function to insert code into the Splunk platform installation directory. From there, a user can execute arbitrary code on the Splunk platform Instance.

An authenticated user may be able to misuse parameters to inject arbitrary operating system commands into mySCADA myPRO versions 8.25.0 and prior.

A code injection vulnerability exists in the Ambari Alert Definition feature, allowing authenticated users to inject and execute arbitrary shell commands. The vulnerability arises when defining alert scripts, where the script filename field is executed using `sh -c`. An attacker with authenticated access can exploit this vulnerability to inject malicious commands, leading to remote code execution on the server. The issue has been fixed in the latest versions of Ambari.

An issue in NETIS SYSTEMS WF2409E v.3.6.42541 allows a remote attacker to execute arbitrary code via the ping and traceroute functions of the diagnostic tools component in the admin management interface.

A command injection vulnerability in RG-EW series home routers and repeaters v.EW_3.0(1)B11P219, RG-NBS and RG-S1930 series switches v.SWITCH_3.0(1)B11P219, RG-EG series business VPN routers v.EG_3.0(1)B11P219, EAP and RAP series wireless access points v.AP_3.0(1)B11P219, and NBC series wireless controllers v.AC_3.0(1)B11P219 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /cgi-bin/luci/api/cmd via the remoteIp field.

CasaOS is an open-source personal cloud system. Prior to version 0.4.4, if an authenticated user using CasaOS is able to successfully connect to a controlled SMB server, they are able to execute arbitrary commands. Version 0.4.4 contains a patch for the issue.

Azure Identity SDK Remote Code Execution Vulnerability

Azure Identity SDK Remote Code Execution Vulnerability

1Panel is an open source Linux server operation and maintenance management panel. Prior to version 1.3.6, an authenticated attacker can craft a malicious payload to achieve command injection when adding container repositories. The vulnerability has been fixed in v1.3.6.

Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.0 and V10 R1.34.8, Assistant V10 R0, Manager V10 R1 before V10 R1.42.0 and V10 R1.34.8, and Manager V10 R0 allow command injection by authenticated users, aka OSFOURK-23556.

Netgear D6220 with Firmware Version 1.0.0.80, D8500 with Firmware Version 1.0.3.60, R6700 with Firmware Version 1.0.2.26, and R6900 with Firmware Version 1.0.2.26 are vulnerable to Command Injection. If an attacker gains web management privileges, they can inject commands into the post request parameters, gaining shell privileges.

EDIMAX BR-6288ACL v1.12 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the pppUserName parameter.

There is a command injection vulnerability in the Tenda G103 Gigabit GPON Terminal with firmware version V1.0.0.5. If an attacker gains web management privileges, they can inject commands gaining shell privileges.

IBM Storage Scale 5.2.2.0 and 5.2.2.1, under certain configurations, could allow an authenticated user to execute privileged commands due to improper input neutralization.

LuaTeX before 1.17.0 allows execution of arbitrary shell commands when compiling a TeX file obtained from an untrusted source. This occurs because luatex-core.lua lets the original io.popen be accessed. This also affects TeX Live before 2023 r66984 and MiKTeX before 23.5.

Azure DevOps Server Remote Code Execution Vulnerability

MXsecurity version 1.0 is vulnearble to command injection vulnerability. This vulnerability has been reported in the SSH CLI program, which can be exploited by attackers who have gained authorization privileges. The attackers can break out of the restricted shell and subsequently execute arbitrary code.

TP-Link TL-WPA4530 KIT V2 (EU)_170406 and V2 (EU)_161115 is vulnerable to Command Injection via _httpRpmPlcDeviceRemove.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the tomography_ping_number parameter.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the smartqos_priority_devices parameter.

** UNSUPPORTED WHEN ASSIGNED ** The Apache Spark UI offers the possibility to enable ACLs via the configuration option spark.acls.enable. With an authentication filter, this checks whether a user has access permissions to view or modify the application. If ACLs are enabled, a code path in HttpSecurityFilter can allow someone to perform impersonation by providing an arbitrary user name. A malicious user might then be able to reach a permission check function that will ultimately build a Unix shell command based on their input, and execute it. This will result in arbitrary shell command execution as the user Spark is currently running as. This issue was disclosed earlier as CVE-2022-33891, but incorrectly claimed version 3.1.3 (which has since gone EOL) would not be affected. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Users are recommended to upgrade to a supported version of Apache Spark, such as version 3.4.0.

AutoGPT versions 0.3.4 and earlier are vulnerable to a Server-Side Template Injection (SSTI) that could lead to Remote Code Execution (RCE). The vulnerability arises from the improper handling of user-supplied format strings in the `AgentOutputBlock` implementation, where malicious input is passed to the Jinja2 templating engine without adequate security measures. Attackers can exploit this flaw to execute arbitrary commands on the host system. The issue is fixed in version 0.4.0.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the system_time_timezone parameter.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the staticroute_list parameter.

WWBN AVideo is an open source video platform. In versions 12.4 and prior, a command injection vulnerability exists at `plugin/CloneSite/cloneClient.json.php` which allows Remote Code Execution if you CloneSite Plugin. This is a bypass to the fix for CVE-2023-30854, which affects WWBN AVideo up to version 12.3. This issue is patched in commit 1df4af01f80d56ff2c4c43b89d0bac151e7fb6e3.

TP-Link TL-WPA4530 KIT V2 (EU)_170406 and V2 (EU)_161115 is vulnerable to Command Injection via _httpRpmPlcDeviceAdd.

The vulnerability may allow a remote low priviledged attacker to run arbitrary shell commands by using lower-level functions to interact with the device.

An issue has been discovered in GitLab EE affecting all versions starting from 16.11 prior to 17.1.7, from 17.2 prior to 17.2.5, and from 17.3 prior to 17.3.2. Due to incomplete input filtering, it was possible to inject commands into a connected Cube server.

FusionCompute 8.0.0 have a command injection vulnerability. The software does not sufficiently validate certain parameters post from user, successful exploit could allow an authenticated attacker to launch a command injection attack.

A vulnerability was found in Tosei Online Store Management System ネット店舗管理システム 4.02/4.03/4.04. It has been rated as critical. Affected by this issue is some unknown functionality of the file /cgi-bin/p1_ftpserver.php. The manipulation of the argument adr_txt leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in D-Link DI-8100 16.07. This issue affects the function msp_info_htm of the file msp_info.htm. The manipulation of the argument cmd leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-273521 was assigned to this vulnerability.

We have recently released new version of UniFi Protect firmware v1.13.3 and v1.14.10 for Unifi Cloud Key Gen2 Plus and UniFi Dream Machine Pro/UNVR respectively that fixes vulnerabilities found on Protect firmware v1.13.2, v1.14.9 and prior according to the description below:View only users can run certain custom commands which allows them to assign themselves unauthorized roles and escalate their privileges.

A vulnerability classified as critical was found in TOTOLINK A3600R 4.1.2cu.5182_B20201102. This vulnerability affects the function setTelnetCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument telnet_enabled leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-272602 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.