A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V5.00 through V5.38, USG FLEX series firmware versions from V5.00 through V5.38, USG FLEX 50(W) series firmware versions from V5.00 through V5.38, and USG20(W)-VPN series firmware versions from V5.00 through V5.38 could allow an authenticated attacker with administrator privileges to execute some OS commands on an affected device by uploading a crafted compressed language file via FTP.

User provided input is not sanitized in the “Settings > Access Control” configuration interface allowing for arbitrary code execution.

GoSecure on behalf of Genetec Inc. has found a flaw that allows for a remote code execution during the installation of ACAP applications on the Axis device. The application handling service in AXIS OS was vulnerable to command injection allowing an attacker to run arbitrary code. Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution.

A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V4.32 through V5.38, USG FLEX series firmware versions from V4.50 through V5.38, USG FLEX 50(W) series firmware versions from V4.16 through V5.38, and USG20(W)-VPN series firmware versions from V4.16 through V5.38 could allow an authenticated attacker with administrator privileges to execute some OS commands on an affected device by uploading a crafted internal user agreement file to the vulnerable device.

Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

The function "generate_app_certificates" in lib/app_certificates.js of FIWARE Keyrock <= 8.4 does not neutralize special elements used in an OS Command properly. This allows an authenticated user with permissions to create applications to execute commands by creating an application with a malicious name.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands with the privileges of root. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.

Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

The function "generate_app_certificates" in controllers/saml2/saml2.js of FIWARE Keyrock <= 8.4 does not neutralize special elements used in an OS Command properly. This allows an authenticated user with permissions to create applications to execute commands by creating an application with a malicious organisationname.

The email search interface of HGiga iSherlock (including MailSherlock, SpamSherock, AuditSherlock) fails to filter special characters in certain function parameters, allowing remote attackers with administrative privileges to exploit this vulnerability for Command Injection attacks, enabling execution of arbitrary system commands.

Multiple vulnerabilities in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The attacker would need valid device credentials but does not require administrator privileges to exploit this vulnerability. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device including the underlying operating system which could also affect the availability of the device.

A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC up to 20240419. This issue affects some unknown processing of the file /view/network Config/GRE/gre_edit_commit.php. The manipulation of the argument name leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-262145 was assigned to this vulnerability.

Authenticated command injection vulnerability exists in the ArubaOS command line interface. Successful exploitation of this vulnerability result in the ability to inject shell commands on the underlying operating system.

Authenticated command execution vulnerability exist in the ArubaOS command line interface (CLI). Successful exploitation of this vulnerabilities result in the ability to run arbitrary commands as a priviledge user on the underlying operating system.

A vulnerability in the Cisco IOx application hosting environment could allow an authenticated, remote attacker to execute arbitrary commands as root on the underlying host operating system. This vulnerability is due to incomplete sanitization of parameters that are passed in for activation of an application. An attacker could exploit this vulnerability by deploying and activating an application in the Cisco IOx application hosting environment with a crafted activation payload file. A successful exploit could allow the attacker to execute arbitrary commands as root on the underlying host operating system.

The system configuration interface of HGiga iSherlock (including MailSherlock, SpamSherock, AuditSherlock) fails to filter special characters in certain function parameters, allowing remote attackers with administrative privileges to exploit this vulnerability for Command Injection attacks, enabling execution of arbitrary system commands.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities.

A vulnerability in the web-based management interface of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code or cause the web-based management process on the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The attacker must have valid administrator credentials. This vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP input to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the web-based management process to restart, resulting in a DoS condition.

A vulnerability has been identified in SENTRON 7KT PAC1260 Data Manager (All versions). The web interface of affected devices does not sanitize the language parameter in specific POST requests. This could allow an authenticated remote attacker to execute arbitrary code with root privileges.

Command injection vulnerability in the Edge Computing UI for the TRO600 series radios that allows for the execution of arbitrary system commands. If exploited, an attacker with write access to the web UI can execute commands on the device with root privileges, far more extensive than what the write privilege intends.

A vulnerability has been identified in SENTRON 7KT PAC1260 Data Manager (All versions). The web interface of affected devices does not sanitize the region parameter in specific POST requests. This could allow an authenticated remote attacker to execute arbitrary code with root privileges.

NetModule NSRW web administration interface executes an OS command constructed with unsanitized user input. A successful exploit could allow an authenticated user to execute arbitrary commands with elevated privileges. This issue affects NSRW: from 4.3.0.0 before 4.3.0.119, from 4.4.0.0 before 4.4.0.118, from 4.6.0.0 before 4.6.0.105, from 4.7.0.0 before 4.7.0.103.

A vulnerability has been identified in SENTRON 7KT PAC1260 Data Manager (All versions). The web interface of affected devices does not sanitize the input parameters in specific GET requests. This could allow an authenticated remote attacker to execute arbitrary code with root privileges.

A vulnerability regarding improper neutralization of special elements used in an OS command ('OS Command Injection') is found in the NTP configuration. This allows remote authenticated users with administrator privileges to execute arbitrary commands via unspecified vectors. The following models with Synology Camera Firmware versions before 1.0.7-0298 may be affected: BC500 and TC500.

AdTran 834-5 HDC17600021F1 (SmartOS 11.1.1.1) devices enable the SSH service by default and have a hidden, undocumented, hard-coded support account whose password is based on the devices MAC address. All of the devices internet interfaces share a similar MAC address that only varies in their final octet. This allows network-adjacent attackers to derive the support user's SSH password by decrementing the final octet of the connected gateway address or via the BSSID. An attacker can then execute arbitrary OS commands with root-level privileges. NOTE: The vendor states that there is no intended functionality allowing an attacker to execute arbitrary OS Commands with root-level privileges. The vendor also states that this issue was fixed in SmartOS 12.5.5.1.

The restricted shell interface in UCOPIA Wireless Appliance before 5.1.8 allows remote authenticated users to gain 'admin' privileges via shell metacharacters in the less command.

Sewio’s Real-Time Location System (RTLS) Studio version 2.0.0 up to and including version 2.6.2 does not properly validate the input module name to the backup services of the software. This could allow a remote attacker to access sensitive functions of the application and execute arbitrary system commands.

Hitron CODA-5310 has insufficient filtering for specific parameters in the connection test function. A remote attacker authenticated as an administrator, can use the management page to perform command injection attacks, to execute arbitrary system command, manipulate system or disrupt service.

A privilege escalation vulnerability was discovered in XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted IPMI commands.

A privilege escalation vulnerability was discovered in the SSH captive command shell interface that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted file uploads.

Tenda W20E V16.01.0.6(3392) is vulnerable to Command injection via cmd_get_ping_output.

A privilege escalation vulnerability was discovered in the web interface or SSH captive command shell interface of XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via a specially crafted request.

A command injection vulnerability in ModifyVLANItem of Trend Micro InterScan Web Security Virtual Appliance 6.5 SP2 could allow an authenticated, remote attacker to send specially crafted HTTP messages and execute arbitrary OS commands with elevated privileges.

A privilege escalation vulnerability was discovered in an upload processing functionality of XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted file uploads.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. Successful exploits could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x: 6.10.7 and below and ClearPass Policy Manager 6.9.x: 6.9.12 and below.

An arbitrary code exection vulnerability exists in Linksys WUMC710 Wireless-AC Universal Media Connector with firmware <= 1.0.02 (build3). The do_setNTP function within the httpd binary uses unvalidated user input in the construction of a system command. An authenticated attacker with administrator privileges can leverage this vulnerability over the network via a malicious GET or POST request to /setNTP.cgi to execute arbitrary commands on the underlying Linux operating system as root.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. Successful exploits could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x: 6.10.7 and below and ClearPass Policy Manager 6.9.x: 6.9.12 and below.

IBM Security Guardium 11.4 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 240901.

A command injection vulnerability in AddVLANItem of Trend Micro InterScan Web Security Virtual Appliance 6.5 SP2 could allow an authenticated, remote attacker to send specially crafted HTTP messages and execute arbitrary OS commands with elevated privileges.

Liferay Portal Server tested on 7.3.5 GA6, 7.2.0 GA1 is affected by OS Command Injection. An administrator user can inject commands through the Gogo Shell module to execute any OS command on the Liferay Portal Sever. NOTE: The developer disputes this as a vulnerability since it is a feature for administrators to access and execute commands in Gogo Shell and therefore not a design fla

MangoOS before 5.2.0 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the Active Process Command feature.

Firmware in KAON AR2140 routers, prior to versions 3.2.50 and 4.2.16, is vulnerable to a shell command injection via sending a crafted request to one of the endpoints. In order to exploit this vulnerability, one has to have access to the administrative portal of the router.

The web console for Mimosa B5, B5c, and C5x firmware through 2.8.0.2 allows authenticated command injection in the Throughput, WANStats, PhyStats, and QosStats API classes. An attacker with access to a web console account may execute operating system commands on affected devices by sending crafted POST requests to the affected endpoints (/core/api/calls/Throughput.php, /core/api/calls/WANStats.php, /core/api/calls/PhyStats.php, /core/api/calls/QosStats.php). This results in the complete takeover of the vulnerable device. This vulnerability does not occur in the older 1.5.x firmware versions.

A command injection vulnerability has been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions: QTS 4.5.1.1456 build 20201015 (and later) QuTS hero h4.5.1.1472 build 20201031 (and later)

Geutebruck IP Cameras G-Code(EEC-2xxx), G-Cam(EBC-21xx/EFD-22xx/ETHC-22xx/EWPC-22xx): All versions 1.12.0.25 and prior may allow a remote authenticated attacker with access to network configuration to supply system commands to the server, leading to remote code execution as root.