When TLS is enabled with ssl-endpoint-identification-enabled set to true, Apache Geode fails to perform hostname verification of the entries in the certificate SAN during the SSL handshake. This could compromise intra-cluster communication using a man-in-the-middle attack.

While an Apache Kafka cluster is being migrated from ZooKeeper mode to KRaft mode, in some cases ACLs will not be correctly enforced. Two preconditions are needed to trigger the bug: 1. The administrator decides to remove an ACL 2. The resource associated with the removed ACL continues to have two or more other ACLs associated with it after the removal. When those two preconditions are met, Kafka will treat the resource as if it had only one ACL associated with it after the removal, rather than the two or more that would be correct. The incorrect condition is cleared by removing all brokers in ZK mode, or by adding a new ACL to the affected resource. Once the migration is completed, there is no metadata loss (the ACLs all remain). The full impact depends on the ACLs in use. If only ALLOW ACLs were configured during the migration, the impact would be limited to availability impact. if DENY ACLs were configured, the impact could include confidentiality and integrity impact depending on the ACLs configured, as the DENY ACLs might be ignored due to this vulnerability during the migration period.

While investigating bug PROTON-2014, we discovered that under some circumstances Apache Qpid Proton versions 0.9 to 0.27.0 (C library and its language bindings) can connect to a peer anonymously using TLS *even when configured to verify the peer certificate* while used with OpenSSL versions before 1.1.0. This means that an undetected man in the middle attack could be constructed if an attacker can arrange to intercept TLS traffic.

Apache Fineract prior to 1.5.0 disables HTTPS hostname verification in ProcessorHelper in the configureClient method. Under typical deployments, a man in the middle attack could be successful.

In some mod_ssl configurations on Apache HTTP Server versions through to 2.4.63, an HTTP desynchronisation attack allows a man-in-the-middle attacker to hijack an HTTP session via a TLS upgrade. Only configurations using "SSLEngine optional" to enable TLS upgrades are affected. Users are recommended to upgrade to version 2.4.64, which removes support for TLS upgrade.

Apache Sling Commons Messaging Mail provides a simple layer on top of JavaMail/Jakarta Mail for OSGi to send mails via SMTPS. To reduce the risk of "man in the middle" attacks additional server identity checks must be performed when accessing mail servers. For compatibility reasons these additional checks are disabled by default in JavaMail/Jakarta Mail. The SimpleMailService in Apache Sling Commons Messaging Mail 1.0 lacks an option to enable these checks for the shared mail session. A user could enable these checks nevertheless by accessing the session via the message created by SimpleMessageBuilder and setting the property mail.smtps.ssl.checkserveridentity to true. Apache Sling Commons Messaging Mail 2.0 adds support for enabling server identity checks and these checks are enabled by default. - https://javaee.github.io/javamail/docs/SSLNOTES.txt - https://javaee.github.io/javamail/docs/api/com/sun/mail/smtp/package-summary.html - https://github.com/eclipse-ee4j/mail/issues/429

Apache Airflow versions before 3.1.7, has vulnerability that allows authenticated UI users with permission to one or more specific Dags to view import errors generated by other Dags they did not have access to. Users are advised to upgrade to 3.1.7 or later, which resolves this issue

Apache Tomcat 6.0.30 through 6.0.33 and 7.x before 7.0.22 does not properly perform certain caching and recycling operations involving request objects, which allows remote attackers to obtain unintended read access to IP address and HTTP header information in opportunistic circumstances by reading TCP data.

XWork 2.2.1 in Apache Struts 2.2.1, and OpenSymphony XWork in OpenSymphony WebWork, allows remote attackers to obtain potentially sensitive information about internal Java class paths via vectors involving an s:submit element and a nonexistent method, a different vulnerability than CVE-2011-1772.3.

Apache Derby before 10.1.2.1 exposes the (1) user and (2) password attributes in cleartext via (a) the RDBNAM parameter of the ACCSEC command and (b) the output of the DatabaseMetaData.getURL function, which allows context-dependent attackers to obtain sensitive information.

Apache HttpClient 4.x before 4.1.1 in Apache HttpComponents, when used with an authenticating proxy server, sends the Proxy-Authorization header to the origin server, which allows remote web servers to obtain sensitive information by logging this header.

The HTTP/1.1 connector in Apache Tomcat 4.1.15 through 4.1.40 does not reject NULL bytes in a URL when allowLinking is configured, which allows remote attackers to read JSP source files and obtain sensitive information.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Solr. The Solr Metrics API publishes all unprotected environment variables available to each Apache Solr instance. Users are able to specify which environment variables to hide, however, the default list is designed to work for known secret Java system properties. Environment variables cannot be strictly defined in Solr, like Java system properties can be, and may be set for the entire host, unlike Java system properties which are set per-Java-proccess. The Solr Metrics API is protected by the "metrics-read" permission. Therefore, Solr Clouds with Authorization setup will only be vulnerable via users with the "metrics-read" permission. This issue affects Apache Solr: from 9.0.0 before 9.3.0. Users are recommended to upgrade to version 9.3.0 or later, in which environment variables are not published via the Metrics API.

The AJP connector in Apache Tomcat 4.0.1 through 4.0.6 and 4.1.0 through 4.1.36, as used in Hitachi Cosminexus Application Server and standalone, does not properly handle when a connection is broken before request body data is sent in a POST request, which can lead to an information leak when "unsuitable request body data" is used for a different request, possibly related to Java Servlet pages.

Arbitrary file properties reading vulnerability in Apache Software Foundation Apache OFBiz when user operates an uri call without authorizations. The same uri can be operated to realize a SSRF attack also without authorizations. Users are recommended to upgrade to version 18.12.11, which fixes this issue.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Solr.This issue affects Apache Solr: from 6.0.0 through 8.11.2, from 9.0.0 before 9.4.1. Solr Streaming Expressions allows users to extract data from other Solr Clouds, using a "zkHost" parameter. When original SolrCloud is setup to use ZooKeeper credentials and ACLs, they will be sent to whatever "zkHost" the user provides. An attacker could setup a server to mock ZooKeeper, that accepts ZooKeeper requests with credentials and ACLs and extracts the sensitive information, then send a streaming expression using the mock server's address in "zkHost". Streaming Expressions are exposed via the "/streaming" handler, with "read" permissions. Users are recommended to upgrade to version 8.11.3 or 9.4.1, which fix the issue. From these versions on, only zkHost values that have the same server address (regardless of chroot), will use the given ZooKeeper credentials and ACLs when connecting.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache DolphinScheduler.This issue affects Apache DolphinScheduler: before 3.2.1. Users are recommended to upgrade to version 3.2.1, which fixes the issue. At the time of disclosure of this advisory, this version has not yet been released. In the mean time, we recommend you make sure the logs are only available to trusted operators.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache ShardingSphere ElasticJob-UI allows an attacker who has guest account to do privilege escalation. This issue affects Apache ShardingSphere ElasticJob-UI Apache ShardingSphere ElasticJob-UI 3.x version 3.0.0 and prior versions.

A bug in the handling of the pipelined requests in Apache Tomcat 9.0.0.M1 to 9.0.0.M18, 8.5.0 to 8.5.12, 8.0.0.RC1 to 8.0.42, 7.0.0 to 7.0.76, and 6.0.0 to 6.0.52, when send file was used, results in the pipelined request being lost when send file processing of the previous request completed. This could result in responses appearing to be sent for the wrong request. For example, a user agent that sent requests A, B and C could see the correct response for request A, the response for request C for request B and no response for request C.

The Apache Qpid Broker for Java can be configured to use different so called AuthenticationProviders to handle user authentication. Among the choices are the SCRAM-SHA-1 and SCRAM-SHA-256 AuthenticationProvider types. It was discovered that these AuthenticationProviders in Apache Qpid Broker for Java 6.0.x before 6.0.6 and 6.1.x before 6.1.1 prematurely terminate the SCRAM SASL negotiation if the provided user name does not exist thus allowing remote attacker to determine the existence of user accounts. The Vulnerability does not apply to AuthenticationProviders other than SCRAM-SHA-1 and SCRAM-SHA-256.

The statistics generator in Apache Pony Mail 0.7 to 0.9 was found to be returning timestamp data without proper authorization checks. This could lead to derived information disclosure on private lists about the timing of specific email subjects or text bodies, though without disclosing the content itself. As this was primarily used as a caching feature for faster loading times, the caching was disabled by default to prevent this. Users using 0.9 should upgrade to 0.10 to address this issue.

mod_proxy in httpd in Apache HTTP Server 2.2.9, when running on Unix, does not close the backend connection if a timeout occurs when reading a response from a persistent connection, which allows remote attackers to obtain a potentially sensitive response intended for a different client in opportunistic circumstances via a normal HTTP request. NOTE: this is the same issue as CVE-2010-2068, but for a different OS and set of affected versions.

Apache HTTP Server 1.3.22 through 1.3.27 on OpenBSD allows remote attackers to obtain sensitive information via (1) the ETag header, which reveals the inode number, or (2) multipart MIME boundary, which reveals child process IDs (PID).

By exploiting the way Apache OpenOffice before 4.1.4 renders embedded objects, an attacker could craft a document that allows reading in a file from the user's filesystem. Information could be retrieved by the attacker by, e.g., using hidden sections to store the information, tricking the user into saving the document and convincing the user to send the document back to the attacker. The vulnerability is mitigated by the need for the attacker to know the precise file path in the target system, and the need to trick the user into saving the document and sending it back.

Apache Tomcat 5.5.0 through 5.5.29 and 6.0.0 through 6.0.26 might allow remote attackers to discover the server's hostname or IP address by sending a request for a resource that requires (1) BASIC or (2) DIGEST authentication, and then reading the realm field in the WWW-Authenticate header in the reply.

Allura Discussion and Allura Forum importing does not restrict URL values specified in attachments. Project administrators can run these imports, which could cause Allura to read local files and expose them.  Exposing internal files then can lead to other exploits, like session hijacking, or remote code execution. This issue affects Apache Allura from 1.0.1 through 1.15.0. Users are recommended to upgrade to version 1.16.0, which fixes the issue.  If you are unable to upgrade, set "disable_entry_points.allura.importers = forge-tracker, forge-discussion" in your .ini config file.

In the TransformXML processor of Apache NiFi before 1.15.1 an authenticated user could configure an XSLT file which, if it included malicious external entity calls, may reveal sensitive information.

Apache CouchDB 0.8.0 through 0.10.1 allows remote attackers to obtain sensitive information by measuring the completion time of operations that verify (1) hashes or (2) passwords.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Airflow.This issue affects Apache Airflow from 2.4.0 to 2.7.0. Sensitive configuration information has been exposed to authenticated users with the ability to read configuration via Airflow REST API for configuration even when the expose_config option is set to non-sensitive-only. The expose_config option is False by default. It is recommended to upgrade to a version that is not affected if you set expose_config to non-sensitive-only configuration. This is a different error than CVE-2023-45348 which allows authenticated user to retrieve individual configuration values in 2.7.* by specially crafting their request (solved in 2.7.2). Users are recommended to upgrade to version 2.7.2, which fixes the issue and additionally fixes CVE-2023-45348.

Apache Guacamole 1.3.0 and older may incorrectly include a private tunnel identifier in the non-private details of some REST responses. This may allow an authenticated user who already has permission to access a particular connection to read from or interact with another user's active use of that same connection.

In Apache Ozone before 1.2.0, Recon HTTP endpoints provide access to OM, SCM and Datanode metadata. Due to a bug, any unauthenticated user can access the data from these endpoints.

When an Apache Geode cluster before v1.4.0 is operating in secure mode, the Geode configuration service does not properly authorize configuration requests. This allows an unprivileged user who gains access to the Geode locator to extract configuration data and previously deployed application code.

When using the OpenWire protocol in ActiveMQ versions 5.14.0 to 5.15.2 it was found that certain system details (such as the OS and kernel version) are exposed as plain text.

When an Apache Geode cluster before v1.3.0 is operating in secure mode and an authenticated user connects to a Geode cluster using the gfsh tool with HTTP, the user is able to obtain status information and control cluster members even without CLUSTER:MANAGE privileges.

The proxy functionality in (1) mod_proxy_ajp.c in the mod_proxy_ajp module and (2) mod_proxy_http.c in the mod_proxy_http module in the Apache HTTP Server 2.4.x before 2.4.3 does not properly determine the situations that require closing a back-end connection, which allows remote attackers to obtain sensitive information in opportunistic circumstances by reading a response that was intended for a different client.

In Apache Airflow versions before 3.1.6, when rendered template fields in a Dag exceed [core] max_templated_field_length, sensitive values could be exposed in cleartext in the Rendered Templates UI. This occurred because serialization of those fields used a secrets masker instance that did not include user-registered mask_secret() patterns, so secrets were not reliably masked before truncation and display. Users are recommended to upgrade to 3.1.6 or later, which fixes this issue

Exposure of Sensitive Information to an Unauthorized Actor in Apache ServiceComb Service-Center.This issue affects Apache ServiceComb Service-Center before 2.1.0 (include). Users are recommended to upgrade to version 2.2.0, which fixes the issue.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache DolphinScheduler. The information exposed to unauthorized actors may include sensitive data such as database credentials. Users who can't upgrade to the fixed version can also set environment variable `MANAGEMENT_ENDPOINTS_WEB_EXPOSURE_INCLUDE=health,metrics,prometheus` to workaround this, or add the following section in the `application.yaml` file ``` management:   endpoints:     web:       exposure:         include: health,metrics,prometheus ``` This issue affects Apache DolphinScheduler: from 3.0.0 before 3.0.2. Users are recommended to upgrade to version 3.0.2, which fixes the issue.

In Apache Gobblin, the Hadoop token is written to a temp file that is visible to all local users on Unix-like systems. This affects versions <= 0.15.0. Users should update to version 0.16.0 which addresses this issue.

If remote logging is not used, the worker (in the case of CeleryExecutor) or the scheduler (in the case of LocalExecutor) runs a Flask logging server and is listening on a specific port and also binds on 0.0.0.0 by default. This logging server had no authentication and allows reading log files of DAG jobs. This issue affects Apache Airflow < 2.1.2.

Design document functions which receive a user http request object may expose authorization or session cookie headers of the user who accesses the document. These design document functions are: *   list *   show *   rewrite *   update An attacker can leak the session component using an HTML-like output, insert the session as an external resource (such as an image), or store the credential in a _local document with an "update" function. For the attack to succeed the attacker has to be able to insert the design documents into the database, then manipulate a user to access a function from that design document. Workaround: Avoid using design documents from untrusted sources which may attempt to access or manipulate request object's headers

Apache Airflow, versions 2.7.0 and 2.7.1, is affected by a vulnerability that allows an authenticated user to retrieve sensitive configuration information when the "expose_config" option is set to "non-sensitive-only". The `expose_config` option is False by default. It is recommended to upgrade to a version that is not affected.

Apache Tomcat 5.5.x before 5.5.34, 6.x before 6.0.33, and 7.x before 7.0.17, when the MemoryUserDatabase is used, creates log entries containing passwords upon encountering errors in JMX user creation, which allows local users to obtain sensitive information by reading a log file.

Apache Tomcat 4.1.0 through 4.1.39, 5.5.0 through 5.5.27, and 6.0.0 through 6.0.18 permits web applications to replace an XML parser used for other web applications, which allows local users to read or modify the (1) web.xml, (2) context.xml, or (3) tld files of arbitrary web applications via a crafted application that is loaded earlier than the target application.

Information Exposure vulnerability in context asset handling of Apache Tapestry allows an attacker to download files inside WEB-INF if using a specially-constructed URL. This was caused by an incomplete fix for CVE-2020-13953. This issue affects Apache Tapestry Apache Tapestry 5.4.0 version to Apache Tapestry 5.6.3; Apache Tapestry 5.7.0 version and Apache Tapestry 5.7.1.

A critical unauthenticated remote code execution vulnerability was found all recent versions of Apache Tapestry. The affected versions include 5.4.5, 5.5.0, 5.6.2 and 5.7.0. The vulnerability I have found is a bypass of the fix for CVE-2019-0195. Recap: Before the fix of CVE-2019-0195 it was possible to download arbitrary class files from the classpath by providing a crafted asset file URL. An attacker was able to download the file `AppModule.class` by requesting the URL `http://localhost:8080/assets/something/services/AppModule.class` which contains a HMAC secret key. The fix for that bug was a blacklist filter that checks if the URL ends with `.class`, `.properties` or `.xml`. Bypass: Unfortunately, the blacklist solution can simply be bypassed by appending a `/` at the end of the URL: `http://localhost:8080/assets/something/services/AppModule.class/` The slash is stripped after the blacklist check and the file `AppModule.class` is loaded into the response. This class usually contains the HMAC secret key which is used to sign serialized Java objects. With the knowledge of that key an attacker can sign a Java gadget chain that leads to RCE (e.g. CommonsBeanUtils1 from ysoserial). Solution for this vulnerability: * For Apache Tapestry 5.4.0 to 5.6.1, upgrade to 5.6.2 or later. * For Apache Tapestry 5.7.0, upgrade to 5.7.1 or later.

Apache Subversion SVN authz protected copyfrom paths regression Subversion servers reveal 'copyfrom' paths that should be hidden according to configured path-based authorization (authz) rules. When a node has been copied from a protected location, users with access to the copy can see the 'copyfrom' path of the original. This also reveals the fact that the node was copied. Only the 'copyfrom' path is revealed; not its contents. Both httpd and svnserve servers are vulnerable.

In Apache CloudStack, a gap in access control checks affected the APIs - createNetworkACL - listNetworkACLs - listResourceDetails - listVirtualMachinesUsageHistory - listVolumesUsageHistory While these APIs were accessible only to authorized users, insufficient permission validation meant that users could occasionally access information beyond their intended scope. Users are recommended to upgrade to Apache CloudStack 4.20.2.0 or 4.22.0.0, which fixes the issue.

In Eclipse Jetty 9.4.32 to 9.4.38, 10.0.0.beta2 to 10.0.1, and 11.0.0.beta2 to 11.0.1, if a user uses a webapps directory that is a symlink, the contents of the webapps directory is deployed as a static webapp, inadvertently serving the webapps themselves and anything else that might be in that directory.

An information disclosure issue was discovered in Apache Tomcat 8.5.7 to 8.5.9 and 9.0.0.M11 to 9.0.0.M15 in reverse-proxy configurations. Http11InputBuffer.java allows remote attackers to read data that was intended to be associated with a different request.