ROC800-Series RTU devices are vulnerable to an authentication bypass, which could allow an attacker to gain unauthorized access to data or control of the device and cause a denial-of-service condition.

Incorrect directory permissions for the shared NI RabbitMQ service may allow a local authenticated user to read RabbitMQ configuration information and potentially enable escalation of privileges.

Incorrect permissions in the installation directories for shared SystemLink Elixir based services may allow an authenticated user to potentially enable escalation of privilege via local access.

Emerson Rosemount X-STREAM Gas AnalyzerX-STREAM enhanced XEGP, XEGK, XEFD, XEXF – all revisions, The affected products are vulnerable to improper authentication for accessing log and backup data, which could allow an attacker with a specially crafted URL to obtain access to sensitive information.

In Emerson Rosemount GC370XA, GC700XA, and GC1500XA products, an unauthenticated user with network access could obtain access to sensitive information or cause a denial-of-service condition.

ApostropheCMS is an open-source content management framework. Prior to version 4.28.0, the bearer token authentication middleware in `@apostrophecms/express/index.js` (lines 386-389) contains an incorrect MongoDB query that allows incomplete login tokens — where the password was verified but TOTP/MFA requirements were NOT — to be used as fully authenticated bearer tokens. This completely bypasses multi-factor authentication for any ApostropheCMS deployment using `@apostrophecms/login-totp` or any custom `afterPasswordVerified` login requirement. Version 4.28.0 fixes the issue.

On an F5OS system, if the root user had previously configured the system to allow login via SSH key-based authentication, and then enabled Appliance Mode; access via SSH key-based authentication is still allowed. For an attacker to exploit this vulnerability they must obtain the root user's SSH private key.   Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Improper Authentication vulnerability in TLS origin verification of Apache Traffic Server allows for man in the middle attacks. This issue affects Apache Traffic Server 8.0.0 to 8.0.8.

DroneScout ds230 Remote ID receiver from BlueMark Innovations is affected by an Improper Authentication vulnerability during the firmware update procedure. Specifically, the firmware update procedure ignores and does not check the validity of the TLS certificate of the HTTPS endpoint from which the firmware update package (.tar.bz2 file) is downloaded. An attacker with the ability to put himself in a Man-in-the-Middle situation (e.g., DNS poisoning, ARP poisoning, control of a node on the route to the endpoint, etc.) can trick the DroneScout ds230 to install a crafted malicious firmware update containing arbitrary files (e.g., executable and configuration) and gain administrative (root) privileges on the underlying Linux operating system. This issue affects DroneScout ds230 firmware from version 20211210-1627 through 20230329-1042.

An image signature validation bypass vulnerability in Kyverno 1.8.3 and 1.8.4 allows a malicious image registry (or a man-in-the-middle attacker) to inject unsigned arbitrary container images into a protected Kubernetes cluster. This is fixed in 1.8.5. This has been fixed in 1.8.5 and mitigations are available for impacted releases.

An authentication bypass vulnerability exists in the OAS Engine functionality of Open Automation Software OAS Platform v18.00.0072. A specially-crafted series of network requests can lead to arbitrary authentication. An attacker can send a sequence of requests to trigger this vulnerability.

An attacker that has gained access to certain private information can use this to act as other user. Vendor: The Apache Software Foundation Versions Affected: Apache OpenMeetings from 3.1.3 before 7.1.0

Networking OS10, versions prior to October 2021 with RESTCONF API enabled, contains an authentication bypass vulnerability. A remote unauthenticated attacker could exploit this vulnerability to gain access and perform actions on the affected system.

The OTP Login Woocommerce & Gravity Forms plugin for WordPress is vulnerable to authentication bypass. This is due to the fact that when generating OTP codes for users to use in order to login via phone number, the plugin returns these codes in an AJAX response. This makes it possible for unauthenticated attackers to obtain login codes for administrators. This does require an attacker have access to the phone number configured for an account, which can be obtained via social engineering or reconnaissance.

etcd versions 3.2.x before 3.2.26 and 3.3.x before 3.3.11 are vulnerable to an improper authentication issue when role-based access control (RBAC) is used and client-cert-auth is enabled. If an etcd client server TLS certificate contains a Common Name (CN) which matches a valid RBAC username, a remote attacker may authenticate as that user with any valid (trusted) client certificate in a REST API request to the gRPC-gateway.

The UserPro plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.1.1. This is due to insufficient verification on the user being supplied during a Facebook login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email. An attacker can leverage CVE-2023-2448 and CVE-2023-2446 to get the user's email address to successfully exploit this vulnerability.

This vulnerability allows an attacker who has access to the WBM to read and write settings-parameters of the device by sending specifically constructed requests without authentication on multiple WAGO PLCs in firmware versions up to FW07.

ETINET BACKBOX E4.09 and H4.09 mismanages password access control. When a user uses the User ID of the process running BBSV to login to the Backbox UI application, the system procedure (USER_AUTHENTICATE_) used for verifying the Password returns 0 (no error). The reason is that the user is not running the XYGate application. Hence, BBSV assumes the Password is correct. For H4.09, the affected version isT0954V04^AAO. For E4.09, the affected version is 22SEP2020. Note: If your current version is E4.10-16MAY2021 (version procedure T9999V04_16MAY2022_BPAKETI_10), a hotfix (FIXPAK-19OCT-2022) is available in version E4.10-19OCT2022. Resolution to CVE-2021-33895 in version E4.11-19OCT2022

A vulnerability in the implementation of the TACACS+ protocol in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to view sensitive data or bypass authentication. This vulnerability exists because the system does not properly check whether the required TACACS+ shared secret is configured. A machine-in-the-middle attacker could exploit this vulnerability by intercepting and reading unencrypted TACACS+ messages or impersonating the TACACS+ server and falsely accepting arbitrary authentication requests. A successful exploit could allow the attacker to view sensitive information in a TACACS+ message or bypass authentication and gain access to the affected device.

A vulnerability was found in Emlog Pro 2.3.4. It has been classified as problematic. This affects an unknown part of the component Cookie Handler. The manipulation of the argument AuthCookie leads to improper authentication. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The identifier VDB-264741 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The WPCOM Member plugin for WordPress is vulnerable to authentication bypass via brute force in all versions up to, and including, 1.7.16. This is due to weak OTP (One-Time Password) generation using only 6 numeric digits combined with a 10-minute validity window and no rate limiting on verification attempts. This makes it possible for unauthenticated attackers to brute-force the verification code and authenticate as any user, including administrators, if they know the target's phone number, and the target does not notice or ignores the SMS notification with the OTP.

Lif Authentication Server is a server used by Lif to do various tasks regarding Lif accounts. This vulnerability has to do with the account recovery system where there does not appear to be a check to make sure the user has been sent the recovery email and entered the correct code. If the attacker knew the email of the target, they could supply the email and immediately prompt the server to update the password without ever needing the code. This issue has been patched in version 1.7.3.

Jenkins OpenId Connect Authentication Plugin 4.354.v321ce67a_1de8 and earlier does not check the `aud` (Audience) claim of an ID Token, allowing attackers to subvert the authentication flow, potentially gaining administrator access to Jenkins.

Jenkins OpenId Connect Authentication Plugin 4.354.v321ce67a_1de8 and earlier does not check the `iss` (Issuer) claim of an ID Token, allowing attackers to subvert the authentication flow, potentially gaining administrator access to Jenkins.

A security vulnerability has been detected in Chia Blockchain 2.1.0. This issue affects the function _authenticate of the file rpc_server_base.py of the component RPC Credential Handler. The manipulation leads to improper authentication. The attack is possible to be carried out remotely. The attack is considered to have high complexity. The exploitability is assessed as difficult. The exploit has been disclosed publicly and may be used. The vendor was informed early via email. A separate report via bugbounty was rejected with the reason "This is by design. The user is responsible for host security".

IntelliVue Patient Monitors MP Series (including MP2/X2/MP30/MP50/MP70/NP90/MX700/800) Rev B-M, IntelliVue Patient Monitors MX (MX400-550) Rev J-M and (X3/MX100 for Rev M only), and Avalon Fetal/Maternal Monitors FM20/FM30/FM40/FM50 with software Revisions F.0, G.0 and J.3 have a vulnerability that allows an unauthenticated attacker to access memory ("write-what-where") from an attacker-chosen device address within the same subnet.

Meshtastic is an open source, off-grid, decentralized, mesh network. Meshtastic uses MQTT to communicate over an internet connection to a shared or private MQTT Server. Nodes can communicate directly via an internet connection or proxied through a connected phone (i.e., via bluetooth). Prior to version 2.5.1, multiple weaknesses in the MQTT implementation allow for authentication and authorization bypasses resulting in unauthorized control of MQTT-connected nodes. Version 2.5.1 contains a patch.

CVE-2024-45823 IMPACT An authentication bypass vulnerability exists in the affected product. The vulnerability exists due to shared secrets across accounts and could allow a threat actor to impersonate a user if the threat actor is able to enumerate additional information required during authentication.

The web application uses a weak authentication mechanism to verify that a request is coming from an authenticated and authorized resource.

An exploitable improper authorization vulnerability exists in admin_addPeer API of cpp-ethereum's JSON-RPC (commit 4e1015743b95821849d001618a7ce82c7c073768). A JSON request can cause an access to the restricted functionality resulting in authorization bypass. An attacker can send JSON to trigger this vulnerability.

A vulnerability was identified in moxi159753 Mogu Blog v2 up to 5.2. This issue affects some unknown processing of the file /storage/ of the component Storage Management Endpoint. The manipulation leads to missing authorization. The attack can be initiated remotely. The attack's complexity is rated as high. The exploitability is assessed as difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in Couchbase Server 6.5.x and 6.6.x before 6.6.6, 7.x before 7.0.5, and 7.1.x before 7.1.2. During the start-up of a Couchbase Server node, there is a small window of time (before the cluster management authentication has started) where an attacker can connect to the cluster manager using default credentials.

`@next-auth/upstash-redis-adapter` is the Upstash Redis adapter for NextAuth.js, which provides authentication for Next.js. Applications that use `next-auth` Email Provider and `@next-auth/upstash-redis-adapter` before v3.0.2 are affected by this vulnerability. The Upstash Redis adapter implementation did not check for both the identifier (email) and the token, but only checking for the identifier when verifying the token in the email callback flow. An attacker who knows about the victim's email could easily sign in as the victim, given the attacker also knows about the verification token's expired duration. The vulnerability is patched in v3.0.2. A workaround is available. Using Advanced Initialization, developers can check the requests and compare the query's token and identifier before proceeding.

An access control issue in MobaXterm before v22.1 allows attackers to make connections to the server via the SSH or SFTP protocols without authentication.

An authentication bypass vulnerability exists in the get_IFTTTTtoken.cgi functionality of Asus RT-AX82U 3.0.0.4.386_49674-ge182230. A specially-crafted HTTP request can lead to full administrative access to the device. An attacker would need to send a series of HTTP requests to exploit this vulnerability.

The Login with NEAR plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 0.3.3. The `ajaxLoginWithNear()` function — registered as a `wp_ajax_nopriv` action and therefore reachable by unauthenticated users — accepts an attacker-supplied `account` POST parameter and issues a valid WordPress authentication cookie based solely on a substring check for `.near`, with no nonce verification, cryptographic signature validation, challenge-response exchange, or any proof that the requester controls the corresponding NEAR wallet. This makes it possible for unauthenticated attackers to log in as any existing WordPress user, including administrators, whose email address matches the deterministic `<account>@near.org` pattern derived from the supplied `account` value. If no matching user exists, the handler automatically creates and authenticates a new WordPress account for the attacker-controlled identifier, providing a further avenue for unauthorized account creation.

Mattermost versions 9.8.x <= 9.8.0, 9.7.x <= 9.7.4, 9.6.x <= 9.6.2 and 9.5.x <= 9.5.5, when shared channels are enabled, fail to use constant time comparison for remote cluster tokens which allows an attacker to retrieve the remote cluster token via a timing attack during remote cluster token comparison.

An exploitable authentication bypass vulnerability exists in the API daemon of Circle with Disney running firmware 2.0.1. A specially crafted token can bypass the authentication routine of the Apid binary, causing the device to grant unintended administrative access. An attacker needs network connectivity to the device to trigger this vulnerability.

A vulnerability was found in WCMS up to 8.3.11. It has been declared as critical. Affected by this vulnerability is the function getMemberByUid of the file /index.php?articleadmin/getallcon of the component Login. The manipulation of the argument uid leads to improper authentication. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

In LXC 2.0, many template scripts download code over cleartext HTTP, and omit a digital-signature check, before running it to bootstrap containers.

Adobe Commerce versions 2.4.7, 2.4.6-p5, 2.4.5-p7, 2.4.4-p8 and earlier are affected by an Improper Authentication vulnerability that could result in privilege escalation. An attacker could exploit this vulnerability to gain unauthorized access or elevated privileges within the application. Exploitation of this issue does not require user interaction, but attack complexity is high.

OpenFGA is a high-performance and flexible authorization/permission engine. Some end users of OpenFGA v1.5.0 or later are vulnerable to authorization bypass when calling Check or ListObjects APIs. You are very likely affected if your model involves exclusion (e.g. `a but not b`) or intersection (e.g. `a and b`). This vulnerability is fixed in v1.5.3.

A potential vulnerability in Splunk Enterprise's implementation of DUO MFA allows for bypassing the MFA verification in Splunk Enterprise versions before 8.1.6. The potential vulnerability impacts Splunk Enterprise instances configured to use DUO MFA and does not impact or affect a DUO product or service.

A remote authentication restriction bypass vulnerability was discovered in Aruba AirWave Management Platform version(s) prior to 8.2.12.1. Aruba has released patches for AirWave Management Platform that address this security vulnerability.

The Registration Forms – User profile, Content Restriction, Spam Protection, Payment Gateways, Invitation Codes WordPress plugin before 3.1.7.6 has a flaw in the social login implementation, allowing unauthenticated attacker to login as any user on the site by only knowing their user ID or username

pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.1, when a PAM service is configured with deny_remote=false in pam_usb (commonly done for display managers such as gdm-password or lightdm to bypass process/TTY heuristics for local sessions), the PAM_RHOST check in pusb_do_auth() is also skipped. PAM_RHOST is set by remote daemons (sshd, XDMCP servers) to identify the remote client address. Because the check is gated inside if (opts.deny_remote), a genuine remote XDMCP connection reaches the USB device authentication step instead of being rejected. This vulnerability is fixed in 0.9.1.

RT is an open source, enterprise-grade issue and ticket tracking system. Versions 5.0.9 and prior in addition to 6.0.0 through 6.0.2 contain an authentication bypass vulnerability in RT installations that use LDAP/AD for user authentication. Under certain LDAP server configurations, an attacker may be able to authenticate as any LDAP-backed RT user without supplying valid credentials. This issue has been fixed in versions 5.0.10 and 6.0.3. If developers are unable to upgrade immediately, they can temporarily work around this issue by reviewing their LDAP server's authentication policy to ensure it rejects unauthenticated bind attempts. Upgrading RT remains the recommended fix.

IBM Verify Identity Access Container 11.0 through 11.0.2 and IBM Security Verify Access Container 10.0 through 10.0.9.1 and IBM Verify Identity Access 11.0 through 11.0.2 and IBM Security Verify Access 10.0 through 10.0.9.1 under certain load conditions could allow an attacker to bypass authentication mechanisms and gain unauthorized access to the application.

The Contest Gallery plugin for WordPress is vulnerable to an authentication bypass leading to admin account takeover in all versions up to, and including, 28.1.5. This is due to the email confirmation handler in `users-registry-check-after-email-or-pin-confirmation.php` using the user's email string in a `WHERE ID = %s` clause instead of the numeric user ID, combined with an unauthenticated key-based login endpoint in `ajax-functions-frontend.php`. When the non-default `RegMailOptional=1` setting is enabled, an attacker can register with a crafted email starting with the target user ID (e.g., `1poc@example.test`), trigger the confirmation flow to overwrite the admin's `user_activation_key` via MySQL integer coercion, and then use the `post_cg1l_login_user_by_key` AJAX action to authenticate as the admin without any credentials. This makes it possible for unauthenticated attackers to take over any WordPress administrator account and gain full site control.

An authentication bypass vulnerability exists in the CMA run_server_6877 functionality of Garrett Metal Detectors iC Module CMA Version 5.0. A properly-timed network connection can lead to authentication bypass via session hijacking. An attacker can send a sequence of requests to trigger this vulnerability.