In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix a potential double-free in fs_any_create_groups When kcalloc() for ft->g succeeds but kvzalloc() for in fails, fs_any_create_groups() will free ft->g. However, its caller fs_any_create_table() will free ft->g again through calling mlx5e_destroy_flow_table(), which will lead to a double-free. Fix this by setting ft->g to NULL in fs_any_create_groups().

In the Linux kernel, the following vulnerability has been resolved: net: atlantic: eliminate double free in error handling logic Driver has a logic leak in ring data allocation/free, where aq_ring_free could be called multiple times on same ring, if system is under stress and got memory allocation error. Ring pointer was used as an indicator of failure, but this is not correct since only ring data is allocated/deallocated. Ring itself is an array member. Changing ring allocation functions to return error code directly. This simplifies error handling and eliminates aq_ring_free on higher layer.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential bit_17 double-free A userspace with multiple threads racing I915_GEM_SET_TILING to set the tiling to I915_TILING_NONE could trigger a double free of the bit_17 bitmask. (Or conversely leak memory on the transition to tiled.) Move allocation/free'ing of the bitmask within the section protected by the obj lock. [tursulin: Correct fixes tag and added cc stable.] (cherry picked from commit 10e0cbaaf1104f449d695c80bcacf930dcd3c42e)

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix the error handler of rfkill config When the core rfkill config throws error, it should free the allocated resources. Currently it is not freeing the core pdev create resources. Avoid this issue by calling the core pdev destroy in the error handler of core rfkill config. Found this issue in the code review and it is compile tested only.

In the Linux kernel, the following vulnerability has been resolved: of: Fix double free in of_parse_phandle_with_args_map In of_parse_phandle_with_args_map() the inner loop that iterates through the map entries calls of_node_put(new) to free the reference acquired by the previous iteration of the inner loop. This assumes that the value of "new" is NULL on the first iteration of the inner loop. Make sure that this is true in all iterations of the outer loop by setting "new" to NULL after its value is assigned to "cur". Extend the unittest to detect the double free and add an additional test case that actually triggers this path.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix a double-free in si_dpm_init When the allocation of adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries fails, amdgpu_free_extended_power_table is called to free some fields of adev. However, when the control flow returns to si_dpm_sw_init, it goes to label dpm_failed and calls si_dpm_fini, which calls amdgpu_free_extended_power_table again and free those fields again. Thus a double-free is triggered.

In the Linux kernel, the following vulnerability has been resolved: igb: Fix igb_down hung on surprise removal In a setup where a Thunderbolt hub connects to Ethernet and a display through USB Type-C, users may experience a hung task timeout when they remove the cable between the PC and the Thunderbolt hub. This is because the igb_down function is called multiple times when the Thunderbolt hub is unplugged. For example, the igb_io_error_detected triggers the first call, and the igb_remove triggers the second call. The second call to igb_down will block at napi_synchronize. Here's the call trace: __schedule+0x3b0/0xddb ? __mod_timer+0x164/0x5d3 schedule+0x44/0xa8 schedule_timeout+0xb2/0x2a4 ? run_local_timers+0x4e/0x4e msleep+0x31/0x38 igb_down+0x12c/0x22a [igb 6615058754948bfde0bf01429257eb59f13030d4] __igb_close+0x6f/0x9c [igb 6615058754948bfde0bf01429257eb59f13030d4] igb_close+0x23/0x2b [igb 6615058754948bfde0bf01429257eb59f13030d4] __dev_close_many+0x95/0xec dev_close_many+0x6e/0x103 unregister_netdevice_many+0x105/0x5b1 unregister_netdevice_queue+0xc2/0x10d unregister_netdev+0x1c/0x23 igb_remove+0xa7/0x11c [igb 6615058754948bfde0bf01429257eb59f13030d4] pci_device_remove+0x3f/0x9c device_release_driver_internal+0xfe/0x1b4 pci_stop_bus_device+0x5b/0x7f pci_stop_bus_device+0x30/0x7f pci_stop_bus_device+0x30/0x7f pci_stop_and_remove_bus_device+0x12/0x19 pciehp_unconfigure_device+0x76/0xe9 pciehp_disable_slot+0x6e/0x131 pciehp_handle_presence_or_link_change+0x7a/0x3f7 pciehp_ist+0xbe/0x194 irq_thread_fn+0x22/0x4d ? irq_thread+0x1fd/0x1fd irq_thread+0x17b/0x1fd ? irq_forced_thread_fn+0x5f/0x5f kthread+0x142/0x153 ? __irq_get_irqchip_state+0x46/0x46 ? kthread_associate_blkcg+0x71/0x71 ret_from_fork+0x1f/0x30 In this case, igb_io_error_detected detaches the network interface and requests a PCIE slot reset, however, the PCIE reset callback is not being invoked and thus the Ethernet connection breaks down. As the PCIE error in this case is a non-fatal one, requesting a slot reset can be avoided. This patch fixes the task hung issue and preserves Ethernet connection by ignoring non-fatal PCIE errors.

In the Linux kernel, the following vulnerability has been resolved: net: fec: Better handle pm_runtime_get() failing in .remove() In the (unlikely) event that pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, the remove callback returned an error early. The problem with this is that the driver core ignores the error value and continues removing the device. This results in a resource leak. Worse the devm allocated resources are freed and so if a callback of the driver is called later the register mapping is already gone which probably results in a crash.

In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: fix use after free in vhost_vdpa_probe() The put_device() calls vhost_vdpa_release_dev() which calls ida_simple_remove() and frees "v". So this call to ida_simple_remove() is a use after free and a double free.

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix double free in error path If the uvc_status_init() function fails to allocate the int_urb, it will free the dev->status pointer but doesn't reset the pointer to NULL. This results in the kfree() call in uvc_status_cleanup() trying to double-free the memory. Fix it by resetting the dev->status pointer to NULL after freeing it. Reviewed by: Ricardo Ribalda <ribalda@chromium.org>

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix double destroy_workqueue on service rescan PCI path While testing corner cases in the driver, a use-after-free crash was found on the service rescan PCI path. When mana_serv_reset() calls mana_gd_suspend(), mana_gd_cleanup() destroys gc->service_wq. If the subsequent mana_gd_resume() fails with -ETIMEDOUT or -EPROTO, the code falls through to mana_serv_rescan() which triggers pci_stop_and_remove_bus_device(). This invokes the PCI .remove callback (mana_gd_remove), which calls mana_gd_cleanup() a second time, attempting to destroy the already- freed workqueue. Fix this by NULL-checking gc->service_wq in mana_gd_cleanup() and setting it to NULL after destruction. Call stack of issue for reference: [Sat Feb 21 18:53:48 2026] Call Trace: [Sat Feb 21 18:53:48 2026] <TASK> [Sat Feb 21 18:53:48 2026] mana_gd_cleanup+0x33/0x70 [mana] [Sat Feb 21 18:53:48 2026] mana_gd_remove+0x3a/0xc0 [mana] [Sat Feb 21 18:53:48 2026] pci_device_remove+0x41/0xb0 [Sat Feb 21 18:53:48 2026] device_remove+0x46/0x70 [Sat Feb 21 18:53:48 2026] device_release_driver_internal+0x1e3/0x250 [Sat Feb 21 18:53:48 2026] device_release_driver+0x12/0x20 [Sat Feb 21 18:53:48 2026] pci_stop_bus_device+0x6a/0x90 [Sat Feb 21 18:53:48 2026] pci_stop_and_remove_bus_device+0x13/0x30 [Sat Feb 21 18:53:48 2026] mana_do_service+0x180/0x290 [mana] [Sat Feb 21 18:53:48 2026] mana_serv_func+0x24/0x50 [mana] [Sat Feb 21 18:53:48 2026] process_one_work+0x190/0x3d0 [Sat Feb 21 18:53:48 2026] worker_thread+0x16e/0x2e0 [Sat Feb 21 18:53:48 2026] kthread+0xf7/0x130 [Sat Feb 21 18:53:48 2026] ? __pfx_worker_thread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ret_from_fork+0x269/0x350 [Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ret_from_fork_asm+0x1a/0x30 [Sat Feb 21 18:53:48 2026] </TASK>

In the Linux kernel, the following vulnerability has been resolved: xhci: Remove device endpoints from bandwidth list when freeing the device Endpoints are normally deleted from the bandwidth list when they are dropped, before the virt device is freed. If xHC host is dying or being removed then the endpoints aren't dropped cleanly due to functions returning early to avoid interacting with a non-accessible host controller. So check and delete endpoints that are still on the bandwidth list when freeing the virt device. Solves a list_del corruption kernel crash when unbinding xhci-pci, caused by xhci_mem_cleanup() when it later tried to delete already freed endpoints from the bandwidth list. This only affects hosts that use software bandwidth checking, which currenty is only the xHC in intel Panther Point PCH (Ivy Bridge)

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-topology: Prevent double freeing of ipc_control_data via load_bytes We have sanity checks for byte controls and if any of the fail the locally allocated scontrol->ipc_control_data is freed up, but not set to NULL. On a rollback path of the error the higher level code will also try to free the scontrol->ipc_control_data which will eventually going to lead to memory corruption as double freeing memory is not a good thing.

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix potential double free on mesh join While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") fixed a memory leak on mesh leave / teardown it introduced a potential memory corruption caused by a double free when rejoining the mesh: ieee80211_leave_mesh() -> kfree(sdata->u.mesh.ie); ... ieee80211_join_mesh() -> copy_mesh_setup() -> old_ie = ifmsh->ie; -> kfree(old_ie); This double free / kernel panics can be reproduced by using wpa_supplicant with an encrypted mesh (if set up without encryption via "iw" then ifmsh->ie is always NULL, which avoids this issue). And then calling: $ iw dev mesh0 mesh leave $ iw dev mesh0 mesh join my-mesh Note that typically these commands are not used / working when using wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids the memory corruption, too. The issue was first observed in an application which was not using wpa_supplicant but "Senf" instead, which implements its own calls to nl80211. Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh join function and leaving it solely up to the mesh leave to free the mesh IE.

In the Linux kernel, the following vulnerability has been resolved: tcp: cdg: allow tcp_cdg_release() to be called multiple times Apparently, mptcp is able to call tcp_disconnect() on an already disconnected flow. This is generally fine, unless current congestion control is CDG, because it might trigger a double-free [1] Instead of fixing MPTCP, and future bugs, we can make tcp_disconnect() more resilient. [1] BUG: KASAN: double-free in slab_free mm/slub.c:3539 [inline] BUG: KASAN: double-free in kfree+0xe2/0x580 mm/slub.c:4567 CPU: 0 PID: 3645 Comm: kworker/0:7 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: events mptcp_worker Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x719 mm/kasan/report.c:433 kasan_report_invalid_free+0x81/0x190 mm/kasan/report.c:462 ____kasan_slab_free+0x18b/0x1c0 mm/kasan/common.c:356 kasan_slab_free include/linux/kasan.h:200 [inline] slab_free_hook mm/slub.c:1759 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1785 slab_free mm/slub.c:3539 [inline] kfree+0xe2/0x580 mm/slub.c:4567 tcp_disconnect+0x980/0x1e20 net/ipv4/tcp.c:3145 __mptcp_close_ssk+0x5ca/0x7e0 net/mptcp/protocol.c:2327 mptcp_do_fastclose net/mptcp/protocol.c:2592 [inline] mptcp_worker+0x78c/0xff0 net/mptcp/protocol.c:2627 process_one_work+0x991/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> Allocated by task 3671: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] ____kasan_kmalloc mm/kasan/common.c:516 [inline] ____kasan_kmalloc mm/kasan/common.c:475 [inline] __kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:525 kmalloc_array include/linux/slab.h:640 [inline] kcalloc include/linux/slab.h:671 [inline] tcp_cdg_init+0x10d/0x170 net/ipv4/tcp_cdg.c:380 tcp_init_congestion_control+0xab/0x550 net/ipv4/tcp_cong.c:193 tcp_reinit_congestion_control net/ipv4/tcp_cong.c:217 [inline] tcp_set_congestion_control+0x96c/0xaa0 net/ipv4/tcp_cong.c:391 do_tcp_setsockopt+0x505/0x2320 net/ipv4/tcp.c:3513 tcp_setsockopt+0xd4/0x100 net/ipv4/tcp.c:3801 mptcp_setsockopt+0x35f/0x2570 net/mptcp/sockopt.c:844 __sys_setsockopt+0x2d6/0x690 net/socket.c:2252 __do_sys_setsockopt net/socket.c:2263 [inline] __se_sys_setsockopt net/socket.c:2260 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 16: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:367 [inline] ____kasan_slab_free+0x166/0x1c0 mm/kasan/common.c:329 kasan_slab_free include/linux/kasan.h:200 [inline] slab_free_hook mm/slub.c:1759 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1785 slab_free mm/slub.c:3539 [inline] kfree+0xe2/0x580 mm/slub.c:4567 tcp_cleanup_congestion_control+0x70/0x120 net/ipv4/tcp_cong.c:226 tcp_v4_destroy_sock+0xdd/0x750 net/ipv4/tcp_ipv4.c:2254 tcp_v6_destroy_sock+0x11/0x20 net/ipv6/tcp_ipv6.c:1969 inet_csk_destroy_sock+0x196/0x440 net/ipv4/inet_connection_sock.c:1157 tcp_done+0x23b/0x340 net/ipv4/tcp.c:4649 tcp_rcv_state_process+0x40e7/0x4990 net/ipv4/tcp_input.c:6624 tcp_v6_do_rcv+0x3fc/0x13c0 net/ipv6/tcp_ipv6.c:1525 tcp_v6_rcv+0x2e8e/0x3830 net/ipv6/tcp_ipv6.c:1759 ip6_protocol_deliver_rcu+0x2db/0x1950 net/ipv6/ip6_input.c:439 ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:484 NF_HOOK include/linux/netfilter.h:302 [inline] NF_HOOK include/linux/netfilter.h:296 [inline] ip6_input+0x9c/0xd ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ext4: fix double brelse() the buffer of the extents path In ext4_ext_try_to_merge_up(), set path[1].p_bh to NULL after it has been released, otherwise it may be released twice. An example of what triggers this is as follows: split2 map split1 |--------|-------|--------| ext4_ext_map_blocks ext4_ext_handle_unwritten_extents ext4_split_convert_extents // path->p_depth == 0 ext4_split_extent // 1. do split1 ext4_split_extent_at |ext4_ext_insert_extent | ext4_ext_create_new_leaf | ext4_ext_grow_indepth | le16_add_cpu(&neh->eh_depth, 1) | ext4_find_extent | // return -ENOMEM |// get error and try zeroout |path = ext4_find_extent | path->p_depth = 1 |ext4_ext_try_to_merge | ext4_ext_try_to_merge_up | path->p_depth = 0 | brelse(path[1].p_bh) ---> not set to NULL here |// zeroout success // 2. update path ext4_find_extent // 3. do split2 ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf ext4_ext_grow_indepth le16_add_cpu(&neh->eh_depth, 1) ext4_find_extent path[0].p_bh = NULL; path->p_depth = 1 read_extent_tree_block ---> return err // path[1].p_bh is still the old value ext4_free_ext_path ext4_ext_drop_refs // path->p_depth == 1 brelse(path[1].p_bh) ---> brelse a buffer twice Finally got the following WARRNING when removing the buffer from lru: ============================================ VFS: brelse: Trying to free free buffer WARNING: CPU: 2 PID: 72 at fs/buffer.c:1241 __brelse+0x58/0x90 CPU: 2 PID: 72 Comm: kworker/u19:1 Not tainted 6.9.0-dirty #716 RIP: 0010:__brelse+0x58/0x90 Call Trace: <TASK> __find_get_block+0x6e7/0x810 bdev_getblk+0x2b/0x480 __ext4_get_inode_loc+0x48a/0x1240 ext4_get_inode_loc+0xb2/0x150 ext4_reserve_inode_write+0xb7/0x230 __ext4_mark_inode_dirty+0x144/0x6a0 ext4_ext_insert_extent+0x9c8/0x3230 ext4_ext_map_blocks+0xf45/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ============================================

hci_conn_cleanup in net/bluetooth/hci_conn.c in the Linux kernel through 6.2.9 has a use-after-free (observed in hci_conn_hash_flush) because of calls to hci_dev_put and hci_conn_put. There is a double free that may lead to privilege escalation.

A double-free flaw was found in the Linux kernel’s NTFS3 subsystem in how a user triggers remount and umount simultaneously. This flaw allows a local user to crash or potentially escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: mm/kasan: fix double free for kasan pXds kasan_free_pxd() assumes the page table is always struct page aligned. But that's not always the case for all architectures. E.g. In case of powerpc with 64K pagesize, PUD table (of size 4096) comes from slab cache named pgtable-2^9. Hence instead of page_to_virt(pxd_page()) let's just directly pass the start of the pxd table which is passed as the 1st argument. This fixes the below double free kasan issue seen with PMEM: radix-mmu: Mapped 0x0000047d10000000-0x0000047f90000000 with 2.00 MiB pages ================================================================== BUG: KASAN: double-free in kasan_remove_zero_shadow+0x9c4/0xa20 Free of addr c0000003c38e0000 by task ndctl/2164 CPU: 34 UID: 0 PID: 2164 Comm: ndctl Not tainted 6.19.0-rc1-00048-gea1013c15392 #157 VOLUNTARY Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_012) hv:phyp pSeries Call Trace: dump_stack_lvl+0x88/0xc4 (unreliable) print_report+0x214/0x63c kasan_report_invalid_free+0xe4/0x110 check_slab_allocation+0x100/0x150 kmem_cache_free+0x128/0x6e0 kasan_remove_zero_shadow+0x9c4/0xa20 memunmap_pages+0x2b8/0x5c0 devm_action_release+0x54/0x70 release_nodes+0xc8/0x1a0 devres_release_all+0xe0/0x140 device_unbind_cleanup+0x30/0x120 device_release_driver_internal+0x3e4/0x450 unbind_store+0xfc/0x110 drv_attr_store+0x78/0xb0 sysfs_kf_write+0x114/0x140 kernfs_fop_write_iter+0x264/0x3f0 vfs_write+0x3bc/0x7d0 ksys_write+0xa4/0x190 system_call_exception+0x190/0x480 system_call_vectored_common+0x15c/0x2ec ---- interrupt: 3000 at 0x7fff93b3d3f4 NIP: 00007fff93b3d3f4 LR: 00007fff93b3d3f4 CTR: 0000000000000000 REGS: c0000003f1b07e80 TRAP: 3000 Not tainted (6.19.0-rc1-00048-gea1013c15392) MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 48888208 XER: 00000000 <...> NIP [00007fff93b3d3f4] 0x7fff93b3d3f4 LR [00007fff93b3d3f4] 0x7fff93b3d3f4 ---- interrupt: 3000 The buggy address belongs to the object at c0000003c38e0000 which belongs to the cache pgtable-2^9 of size 4096 The buggy address is located 0 bytes inside of 4096-byte region [c0000003c38e0000, c0000003c38e1000) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x3c38c head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:c0000003bfd63e01 flags: 0x63ffff800000040(head|node=6|zone=0|lastcpupid=0x7ffff) page_type: f5(slab) raw: 063ffff800000040 c000000140058980 5deadbeef0000122 0000000000000000 raw: 0000000000000000 0000000080200020 00000000f5000000 c0000003bfd63e01 head: 063ffff800000040 c000000140058980 5deadbeef0000122 0000000000000000 head: 0000000000000000 0000000080200020 00000000f5000000 c0000003bfd63e01 head: 063ffff800000002 c00c000000f0e301 00000000ffffffff 00000000ffffffff head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004 page dumped because: kasan: bad access detected [ 138.953636] [ T2164] Memory state around the buggy address: [ 138.953643] [ T2164] c0000003c38dff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953652] [ T2164] c0000003c38dff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953661] [ T2164] >c0000003c38e0000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953669] [ T2164] ^ [ 138.953675] [ T2164] c0000003c38e0080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953684] [ T2164] c0000003c38e0100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953692] [ T2164] ================================================================== [ 138.953701] [ T2164] Disabling lock debugging due to kernel taint

In the Linux kernel, the following vulnerability has been resolved: usb: ulpi: fix double free in ulpi_register_interface() error path When device_register() fails, ulpi_register() calls put_device() on ulpi->dev. The device release callback ulpi_dev_release() drops the OF node reference and frees ulpi, but the current error path in ulpi_register_interface() then calls kfree(ulpi) again, causing a double free. Let put_device() handle the cleanup through ulpi_dev_release() and avoid freeing ulpi again in ulpi_register_interface().

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: Don't free command immediately Don't prematurely free the command. Wait for the status completion of the sense status. It can be freed then. Otherwise we will double-free the command.

In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix double free of WoL irq We do not need to free wol_irq since it was instantiated with devm_request_irq(). So devres will free for us.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix handling of plane refcount [Why] The mechanism to backup and restore plane states doesn't maintain refcount, which can cause issues if the refcount of the plane changes in between backup and restore operations, such as memory leaks if the refcount was supposed to go down, or double frees / invalid memory accesses if the refcount was supposed to go up. [How] Cache and re-apply current refcount when restoring plane states.

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: fix double free in atmel_pmecc_create_user() The "user" pointer was converted from being allocated with kzalloc() to being allocated by devm_kzalloc(). Calling kfree(user) will lead to a double free.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: cirrus: cs42l43: Fix double-put in cs42l43_pin_probe() devm_add_action_or_reset() already invokes the action on failure, so the explicit put causes a double-put.

In the Linux kernel, the following vulnerability has been resolved: 9p/xen: fix release of IRQ Kernel logs indicate an IRQ was double-freed. Pass correct device ID during IRQ release. [Dominique: remove confusing variable reset to 0]

In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Avoid segmentation fault on module unload The segmentation fault happens because: During modprobe: 1. In igen6_probe(), igen6_pvt will be allocated with kzalloc() 2. In igen6_register_mci(), mci->pvt_info will point to &igen6_pvt->imc[mc] During rmmod: 1. In mci_release() in edac_mc.c, it will kfree(mci->pvt_info) 2. In igen6_remove(), it will kfree(igen6_pvt); Fix this issue by setting mci->pvt_info to NULL to avoid the double kfree.

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix potential double remove of hotplug slot In commit 6ee600bfbe0f ("s390/pci: remove hotplug slot when releasing the device") the zpci_exit_slot() was moved from zpci_device_reserved() to zpci_release_device() with the intention of keeping the hotplug slot around until the device is actually removed. Now zpci_release_device() is only called once all references are dropped. Since the zPCI subsystem only drops its reference once the device is in the reserved state it follows that zpci_release_device() must only deal with devices in the reserved state. Despite that it contains code to tear down from both configured and standby state. For the standby case this already includes the removal of the hotplug slot so would cause a double removal if a device was ever removed in either configured or standby state. Instead of causing a potential double removal in a case that should never happen explicitly WARN_ON() if a device in non-reserved state is released and get rid of the dead code cases.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Handle dml allocation failure to avoid crash [Why] In the case where a dml allocation fails for any reason, the current state's dml contexts would no longer be valid. Then subsequent calls dc_state_copy_internal would shallow copy invalid memory and if the new state was released, a double free would occur. [How] Reset dml pointers in new_state to NULL and avoid invalid pointer (cherry picked from commit bcafdc61529a48f6f06355d78eb41b3aeda5296c)

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix warning when unbinding If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath12k_pci), and we get: WARNING: CPU: 0 PID: 2098 at mm/slub.c:4689 free_large_kmalloc+0x4d/0x80 Call Trace: free_large_kmalloc ath12k_dp_free ath12k_core_deinit ath12k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free.

In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: Fix double free issue with interrupt buffer allocation In lan78xx_probe(), the buffer `buf` was being freed twice: once implicitly through `usb_free_urb(dev->urb_intr)` with the `URB_FREE_BUFFER` flag and again explicitly by `kfree(buf)`. This caused a double free issue. To resolve this, reordered `kmalloc()` and `usb_alloc_urb()` calls to simplify the initialization sequence and removed the redundant `kfree(buf)`. Now, `buf` is allocated after `usb_alloc_urb()`, ensuring it is correctly managed by `usb_fill_int_urb()` and freed by `usb_free_urb()` as intended.

In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: fix double free via VMA splitting privcmd_vm_ops defines .close (privcmd_close), but neither .may_split nor .open. When userspace does a partial munmap() on a privcmd mapping, the kernel splits the VMA via __split_vma(). Since may_split is NULL, the split is allowed. vm_area_dup() copies vm_private_data (a pages array allocated in alloc_empty_pages()) into the new VMA without any fixup, because there is no .open callback. Both VMAs now point to the same pages array. When the unmapped portion is closed, privcmd_close() calls: - xen_unmap_domain_gfn_range() - xen_free_unpopulated_pages() - kvfree(pages) The surviving VMA still holds the dangling pointer. When it is later destroyed, the same sequence runs again, which leads to a double free. Fix this issue by adding a .may_split callback denying the VMA split. This is XSA-487 / CVE-2026-31787

In the Linux kernel, the following vulnerability has been resolved: ASoC: sma1307: fix double free of devm_kzalloc() memory A previous change added NULL checks and cleanup for allocation failures in sma1307_setting_loaded(). However, the cleanup for mode_set entries is wrong. Those entries are allocated with devm_kzalloc(), so they are device-managed resources and must not be freed with kfree(). Manually freeing them in the error path can lead to a double free when devres later releases the same memory. Drop the manual kfree() loop and let devres handle the cleanup.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix double free in OPTEE transport Channels can be shared between protocols, avoid freeing the same channel descriptors twice when unloading the stack.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: nuvoton: fix a double free in ma35_pinctrl_dt_node_to_map_func() 'new_map' is allocated using devm_* which takes care of freeing the allocated data on device removal, call to .dt_free_map = pinconf_generic_dt_free_map double frees the map as pinconf_generic_dt_free_map() calls pinctrl_utils_free_map(). Fix this by using kcalloc() instead of auto-managed devm_kcalloc().

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data In tcp_bpf_send_verdict() redirection, the eval variable is assigned to __SK_REDIRECT after the apply_bytes data is sent, if msg has more_data, sock_put() will be called multiple times. We should reset the eval variable to __SK_NONE every time more_data starts. This causes: IPv4: Attempt to release TCP socket in state 1 00000000b4c925d7 ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 5 PID: 4482 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0x110 Modules linked in: CPU: 5 PID: 4482 Comm: sockhash_bypass Kdump: loaded Not tainted 6.0.0 #1 Hardware name: Red Hat KVM, BIOS 1.11.0-2.el7 04/01/2014 Call Trace: <TASK> __tcp_transmit_skb+0xa1b/0xb90 ? __alloc_skb+0x8c/0x1a0 ? __kmalloc_node_track_caller+0x184/0x320 tcp_write_xmit+0x22a/0x1110 __tcp_push_pending_frames+0x32/0xf0 do_tcp_sendpages+0x62d/0x640 tcp_bpf_push+0xae/0x2c0 tcp_bpf_sendmsg_redir+0x260/0x410 ? preempt_count_add+0x70/0xa0 tcp_bpf_send_verdict+0x386/0x4b0 tcp_bpf_sendmsg+0x21b/0x3b0 sock_sendmsg+0x58/0x70 __sys_sendto+0xfa/0x170 ? xfd_validate_state+0x1d/0x80 ? switch_fpu_return+0x59/0xe0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: spi: meson-spicc: Fix double-put in remove path meson_spicc_probe() registers the controller with devm_spi_register_controller(), so teardown already drops the controller reference via devm cleanup. Calling spi_controller_put() again in meson_spicc_remove() causes a double-put.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix double free on tx path. We see kernel crashes and lockups and KASAN errors related to ax210 firmware crashes. One of the KASAN dumps pointed at the tx path, and it appears there is indeed a way to double-free an skb. If iwl_mvm_tx_skb_sta returns non-zero, then the 'skb' sent into the method will be freed. But, in case where we build TSO skb buffer, the skb may also be freed in error case. So, return 0 in that particular error case and do cleanup manually. BUG: KASAN: use-after-free in __list_del_entry_valid+0x12/0x90 iwlwifi 0000:06:00.0: 0x00000000 | tsf hi Read of size 8 at addr ffff88813cfa4ba0 by task btserver/9650 CPU: 4 PID: 9650 Comm: btserver Tainted: G W 5.19.8+ #5 iwlwifi 0000:06:00.0: 0x00000000 | time gp1 Hardware name: Default string Default string/SKYBAY, BIOS 5.12 02/19/2019 Call Trace: <TASK> dump_stack_lvl+0x55/0x6d print_report.cold.12+0xf2/0x684 iwlwifi 0000:06:00.0: 0x1D0915A8 | time gp2 ? __list_del_entry_valid+0x12/0x90 kasan_report+0x8b/0x180 iwlwifi 0000:06:00.0: 0x00000001 | uCode revision type ? __list_del_entry_valid+0x12/0x90 __list_del_entry_valid+0x12/0x90 iwlwifi 0000:06:00.0: 0x00000048 | uCode version major tcp_update_skb_after_send+0x5d/0x170 __tcp_transmit_skb+0xb61/0x15c0 iwlwifi 0000:06:00.0: 0xDAA05125 | uCode version minor ? __tcp_select_window+0x490/0x490 iwlwifi 0000:06:00.0: 0x00000420 | hw version ? trace_kmalloc_node+0x29/0xd0 ? __kmalloc_node_track_caller+0x12a/0x260 ? memset+0x1f/0x40 ? __build_skb_around+0x125/0x150 ? __alloc_skb+0x1d4/0x220 ? skb_zerocopy_clone+0x55/0x230 iwlwifi 0000:06:00.0: 0x00489002 | board version ? kmalloc_reserve+0x80/0x80 ? rcu_read_lock_bh_held+0x60/0xb0 tcp_write_xmit+0x3f1/0x24d0 iwlwifi 0000:06:00.0: 0x034E001C | hcmd ? __check_object_size+0x180/0x350 iwlwifi 0000:06:00.0: 0x24020000 | isr0 tcp_sendmsg_locked+0x8a9/0x1520 iwlwifi 0000:06:00.0: 0x01400000 | isr1 ? tcp_sendpage+0x50/0x50 iwlwifi 0000:06:00.0: 0x48F0000A | isr2 ? lock_release+0xb9/0x400 ? tcp_sendmsg+0x14/0x40 iwlwifi 0000:06:00.0: 0x00C3080C | isr3 ? lock_downgrade+0x390/0x390 ? do_raw_spin_lock+0x114/0x1d0 iwlwifi 0000:06:00.0: 0x00200000 | isr4 ? rwlock_bug.part.2+0x50/0x50 iwlwifi 0000:06:00.0: 0x034A001C | last cmd Id ? rwlock_bug.part.2+0x50/0x50 ? lockdep_hardirqs_on_prepare+0xe/0x200 iwlwifi 0000:06:00.0: 0x0000C2F0 | wait_event ? __local_bh_enable_ip+0x87/0xe0 ? inet_send_prepare+0x220/0x220 iwlwifi 0000:06:00.0: 0x000000C4 | l2p_control tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 iwlwifi 0000:06:00.0: 0x00010034 | l2p_duration __sys_sendto+0x19d/0x250 iwlwifi 0000:06:00.0: 0x00000007 | l2p_mhvalid ? __ia32_sys_getpeername+0x40/0x40 iwlwifi 0000:06:00.0: 0x00000000 | l2p_addr_match ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_sched_held+0x5a/0xd0 ? lock_release+0xb9/0x400 ? lock_downgrade+0x390/0x390 ? ktime_get+0x64/0x130 ? ktime_get+0x8d/0x130 ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? rcu_read_lock_bh_held+0xb0/0xb0 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f1d126e4531 Code: 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 35 80 0c 00 41 89 ca 8b 00 85 c0 75 1c 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 67 c3 66 0f 1f 44 00 00 55 48 83 ec 20 48 89 RSP: 002b:00007ffe21a679d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000000000000ffdc RCX: 00007f1d126e4531 RDX: 0000000000010000 RSI: 000000000374acf0 RDI: 0000000000000014 RBP: 00007ffe21a67ac0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R ---truncated---

In the Linux kernel, the following vulnerability has been resolved: driver core: bus: Fix double free in driver API bus_register() For bus_register(), any error which happens after kset_register() will cause that @priv are freed twice, fixed by setting @priv with NULL after the first free.

In the Linux kernel, the following vulnerability has been resolved: nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure On error situation `clp->cl_cb_conn.cb_xprt` should not be given a reference to the xprt otherwise both client cleanup and the error handling path of the caller call to put it. Better to delay handing over the reference to a later branch. [ 72.530665] refcount_t: underflow; use-after-free. [ 72.531933] WARNING: CPU: 0 PID: 173 at lib/refcount.c:28 refcount_warn_saturate+0xcf/0x120 [ 72.533075] Modules linked in: nfsd(OE) nfsv4(OE) nfsv3(OE) nfs(OE) lockd(OE) compat_nfs_ssc(OE) nfs_acl(OE) rpcsec_gss_krb5(OE) auth_rpcgss(OE) rpcrdma(OE) dns_resolver fscache netfs grace rdma_cm iw_cm ib_cm sunrpc(OE) mlx5_ib mlx5_core mlxfw pci_hyperv_intf ib_uverbs ib_core xt_MASQUERADE nf_conntrack_netlink nft_counter xt_addrtype nft_compat br_netfilter bridge stp llc nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set overlay nf_tables nfnetlink crct10dif_pclmul crc32_pclmul ghash_clmulni_intel xfs serio_raw virtio_net virtio_blk net_failover failover fuse [last unloaded: sunrpc] [ 72.540389] CPU: 0 PID: 173 Comm: kworker/u16:5 Tainted: G OE 5.15.82-dan #1 [ 72.541511] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-3.module+el8.7.0+1084+97b81f61 04/01/2014 [ 72.542717] Workqueue: nfsd4_callbacks nfsd4_run_cb_work [nfsd] [ 72.543575] RIP: 0010:refcount_warn_saturate+0xcf/0x120 [ 72.544299] Code: 55 00 0f 0b 5d e9 01 50 98 00 80 3d 75 9e 39 08 00 0f 85 74 ff ff ff 48 c7 c7 e8 d1 60 8e c6 05 61 9e 39 08 01 e8 f6 51 55 00 <0f> 0b 5d e9 d9 4f 98 00 80 3d 4b 9e 39 08 00 0f 85 4c ff ff ff 48 [ 72.546666] RSP: 0018:ffffb3f841157cf0 EFLAGS: 00010286 [ 72.547393] RAX: 0000000000000026 RBX: ffff89ac6231d478 RCX: 0000000000000000 [ 72.548324] RDX: ffff89adb7c2c2c0 RSI: ffff89adb7c205c0 RDI: ffff89adb7c205c0 [ 72.549271] RBP: ffffb3f841157cf0 R08: 0000000000000000 R09: c0000000ffefffff [ 72.550209] R10: 0000000000000001 R11: ffffb3f841157ad0 R12: ffff89ac6231d180 [ 72.551142] R13: ffff89ac6231d478 R14: ffff89ac40c06180 R15: ffff89ac6231d4b0 [ 72.552089] FS: 0000000000000000(0000) GS:ffff89adb7c00000(0000) knlGS:0000000000000000 [ 72.553175] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 72.553934] CR2: 0000563a310506a8 CR3: 0000000109a66000 CR4: 0000000000350ef0 [ 72.554874] Call Trace: [ 72.555278] <TASK> [ 72.555614] svc_xprt_put+0xaf/0xe0 [sunrpc] [ 72.556276] nfsd4_process_cb_update.isra.11+0xb7/0x410 [nfsd] [ 72.557087] ? update_load_avg+0x82/0x610 [ 72.557652] ? cpuacct_charge+0x60/0x70 [ 72.558212] ? dequeue_entity+0xdb/0x3e0 [ 72.558765] ? queued_spin_unlock+0x9/0x20 [ 72.559358] nfsd4_run_cb_work+0xfc/0x270 [nfsd] [ 72.560031] process_one_work+0x1df/0x390 [ 72.560600] worker_thread+0x37/0x3b0 [ 72.561644] ? process_one_work+0x390/0x390 [ 72.562247] kthread+0x12f/0x150 [ 72.562710] ? set_kthread_struct+0x50/0x50 [ 72.563309] ret_from_fork+0x22/0x30 [ 72.563818] </TASK> [ 72.564189] ---[ end trace 031117b1c72ec616 ]--- [ 72.566019] list_add corruption. next->prev should be prev (ffff89ac4977e538), but was ffff89ac4763e018. (next=ffff89ac4763e018). [ 72.567647] ------------[ cut here ]------------

In the Linux kernel, the following vulnerability has been resolved: s390: fix double free of GS and RI CBs on fork() failure The pointers for guarded storage and runtime instrumentation control blocks are stored in the thread_struct of the associated task. These pointers are initially copied on fork() via arch_dup_task_struct() and then cleared via copy_thread() before fork() returns. If fork() happens to fail after the initial task dup and before copy_thread(), the newly allocated task and associated thread_struct memory are freed via free_task() -> arch_release_task_struct(). This results in a double free of the guarded storage and runtime info structs because the fields in the failed task still refer to memory associated with the source task. This problem can manifest as a BUG_ON() in set_freepointer() (with CONFIG_SLAB_FREELIST_HARDENED enabled) or KASAN splat (if enabled) when running trinity syscall fuzz tests on s390x. To avoid this problem, clear the associated pointer fields in arch_dup_task_struct() immediately after the new task is copied. Note that the RI flag is still cleared in copy_thread() because it resides in thread stack memory and that is where stack info is copied.

In the Linux kernel, the following vulnerability has been resolved: media: dvb-core: Fix double free in dvb_register_device() In function dvb_register_device() -> dvb_register_media_device() -> dvb_create_media_entity(), dvb->entity is allocated and initialized. If the initialization fails, it frees the dvb->entity, and return an error code. The caller takes the error code and handles the error by calling dvb_media_device_free(), which unregisters the entity and frees the field again if it is not NULL. As dvb->entity may not NULLed in dvb_create_media_entity() when the allocation of dvbdev->pad fails, a double free may occur. This may also cause an Use After free in media_device_unregister_entity(). Fix this by storing NULL to dvb->entity when it is freed.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix double release compute pasid If kfd_process_device_init_vm returns failure after vm is converted to compute vm and vm->pasid set to compute pasid, KFD will not take pdd->drm_file reference. As a result, drm close file handler maybe called to release the compute pasid before KFD process destroy worker to release the same pasid and set vm->pasid to zero, this generates below WARNING backtrace and NULL pointer access. Add helper amdgpu_amdkfd_gpuvm_set_vm_pasid and call it at the last step of kfd_process_device_init_vm, to ensure vm pasid is the original pasid if acquiring vm failed or is the compute pasid with pdd->drm_file reference taken to avoid double release same pasid. amdgpu: Failed to create process VM object ida_free called for id=32770 which is not allocated. WARNING: CPU: 57 PID: 72542 at ../lib/idr.c:522 ida_free+0x96/0x140 RIP: 0010:ida_free+0x96/0x140 Call Trace: amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu] amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu] drm_file_free.part.13+0x216/0x270 [drm] drm_close_helper.isra.14+0x60/0x70 [drm] drm_release+0x6e/0xf0 [drm] __fput+0xcc/0x280 ____fput+0xe/0x20 task_work_run+0x96/0xc0 do_exit+0x3d0/0xc10 BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:ida_free+0x76/0x140 Call Trace: amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu] amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu] drm_file_free.part.13+0x216/0x270 [drm] drm_close_helper.isra.14+0x60/0x70 [drm] drm_release+0x6e/0xf0 [drm] __fput+0xcc/0x280 ____fput+0xe/0x20 task_work_run+0x96/0xc0 do_exit+0x3d0/0xc10

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: clear wdev->cqm_config pointer on free When we free wdev->cqm_config when unregistering, we also need to clear out the pointer since the same wdev/netdev may get re-registered in another network namespace, then destroyed later, running this code again, which results in a double-free.

In the Linux kernel, the following vulnerability has been resolved: ext4: drop ppath from ext4_ext_replay_update_ex() to avoid double-free When calling ext4_force_split_extent_at() in ext4_ext_replay_update_ex(), the 'ppath' is updated but it is the 'path' that is freed, thus potentially triggering a double-free in the following process: ext4_ext_replay_update_ex ppath = path ext4_force_split_extent_at(&ppath) ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf ext4_ext_grow_indepth ext4_find_extent if (depth > path[0].p_maxdepth) kfree(path) ---> path First freed *orig_path = path = NULL ---> null ppath kfree(path) ---> path double-free !!! So drop the unnecessary ppath and use path directly to avoid this problem. And use ext4_find_extent() directly to update path, avoiding unnecessary memory allocation and freeing. Also, propagate the error returned by ext4_find_extent() instead of using strange error codes.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix bsg_done() causing double free Kernel panic observed on system, [5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000 [5353358.825194] #PF: supervisor write access in kernel mode [5353358.825195] #PF: error_code(0x0002) - not-present page [5353358.825196] PGD 100006067 P4D 0 [5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI [5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1 [5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025 [5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10 [5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246 [5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000 [5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000 [5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000 [5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090 [5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000 [5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000 [5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0 [5353358.825221] PKRU: 55555554 [5353358.825222] Call Trace: [5353358.825223] <TASK> [5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825232] ? sg_copy_buffer+0xc8/0x110 [5353358.825236] ? __die_body.cold+0x8/0xd [5353358.825238] ? page_fault_oops+0x134/0x170 [5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110 [5353358.825244] ? exc_page_fault+0xa8/0x150 [5353358.825247] ? asm_exc_page_fault+0x22/0x30 [5353358.825252] ? memcpy_erms+0x6/0x10 [5353358.825253] sg_copy_buffer+0xc8/0x110 [5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx] [5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx] Most routines in qla_bsg.c call bsg_done() only for success cases. However a few invoke it for failure case as well leading to a double free. Validate before calling bsg_done().

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix double free issue during amdgpu module unload Flexible endpoints use DIGs from available inflexible endpoints, so only the encoders of inflexible links need to be freed. Otherwise, a double free issue may occur when unloading the amdgpu module. [ 279.190523] RIP: 0010:__slab_free+0x152/0x2f0 [ 279.190577] Call Trace: [ 279.190580] <TASK> [ 279.190582] ? show_regs+0x69/0x80 [ 279.190590] ? die+0x3b/0x90 [ 279.190595] ? do_trap+0xc8/0xe0 [ 279.190601] ? do_error_trap+0x73/0xa0 [ 279.190605] ? __slab_free+0x152/0x2f0 [ 279.190609] ? exc_invalid_op+0x56/0x70 [ 279.190616] ? __slab_free+0x152/0x2f0 [ 279.190642] ? asm_exc_invalid_op+0x1f/0x30 [ 279.190648] ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191096] ? __slab_free+0x152/0x2f0 [ 279.191102] ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191469] kfree+0x260/0x2b0 [ 279.191474] dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191821] link_destroy+0xd7/0x130 [amdgpu] [ 279.192248] dc_destruct+0x90/0x270 [amdgpu] [ 279.192666] dc_destroy+0x19/0x40 [amdgpu] [ 279.193020] amdgpu_dm_fini+0x16e/0x200 [amdgpu] [ 279.193432] dm_hw_fini+0x26/0x40 [amdgpu] [ 279.193795] amdgpu_device_fini_hw+0x24c/0x400 [amdgpu] [ 279.194108] amdgpu_driver_unload_kms+0x4f/0x70 [amdgpu] [ 279.194436] amdgpu_pci_remove+0x40/0x80 [amdgpu] [ 279.194632] pci_device_remove+0x3a/0xa0 [ 279.194638] device_remove+0x40/0x70 [ 279.194642] device_release_driver_internal+0x1ad/0x210 [ 279.194647] driver_detach+0x4e/0xa0 [ 279.194650] bus_remove_driver+0x6f/0xf0 [ 279.194653] driver_unregister+0x33/0x60 [ 279.194657] pci_unregister_driver+0x44/0x90 [ 279.194662] amdgpu_exit+0x19/0x1f0 [amdgpu] [ 279.194939] __do_sys_delete_module.isra.0+0x198/0x2f0 [ 279.194946] __x64_sys_delete_module+0x16/0x20 [ 279.194950] do_syscall_64+0x58/0x120 [ 279.194954] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 279.194980] </TASK>