In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption by fallocate When fallocate punches holes out of inode size, if original isize is in the middle of last cluster, then the part from isize to the end of the cluster will be zeroed with buffer write, at that time isize is not yet updated to match the new size, if writeback is kicked in, it will invoke ocfs2_writepage()->block_write_full_page() where the pages out of inode size will be dropped. That will cause file corruption. Fix this by zero out eof blocks when extending the inode size. Running the following command with qemu-image 4.2.1 can get a corrupted coverted image file easily. qemu-img convert -p -t none -T none -f qcow2 $qcow_image \ -O qcow2 -o compat=1.1 $qcow_image.conv The usage of fallocate in qemu is like this, it first punches holes out of inode size, then extend the inode size. fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2276196352, 65536) = 0 fallocate(11, 0, 2276196352, 65536) = 0 v1: https://www.spinics.net/lists/linux-fsdevel/msg193999.html v2: https://lore.kernel.org/linux-fsdevel/20210525093034.GB4112@quack2.suse.cz/T/

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version Arturo reported this backtrace: [709732.358791] WARNING: CPU: 3 PID: 456 at arch/x86/kernel/fpu/core.c:128 kernel_fpu_begin_mask+0xae/0xe0 [709732.358793] Modules linked in: binfmt_misc nft_nat nft_chain_nat nf_nat nft_counter nft_ct nf_tables nf_conntrack_netlink nfnetlink 8021q garp stp mrp llc vrf intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul mgag200 ghash_clmulni_intel drm_kms_helper cec aesni_intel drm libaes crypto_simd cryptd glue_helper mei_me dell_smbios iTCO_wdt evdev intel_pmc_bxt iTCO_vendor_support dcdbas pcspkr rapl dell_wmi_descriptor wmi_bmof sg i2c_algo_bit watchdog mei acpi_ipmi ipmi_si button nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipmi_devintf ipmi_msghandler ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor sd_mod t10_pi crc_t10dif crct10dif_generic raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ahci libahci tg3 libata xhci_pci libphy xhci_hcd ptp usbcore crct10dif_pclmul crct10dif_common bnxt_en crc32c_intel scsi_mod [709732.358941] pps_core i2c_i801 lpc_ich i2c_smbus wmi usb_common [709732.358957] CPU: 3 PID: 456 Comm: jbd2/dm-0-8 Not tainted 5.10.0-0.bpo.5-amd64 #1 Debian 5.10.24-1~bpo10+1 [709732.358959] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.9.3 09/23/2020 [709732.358964] RIP: 0010:kernel_fpu_begin_mask+0xae/0xe0 [709732.358969] Code: ae 54 24 04 83 e3 01 75 38 48 8b 44 24 08 65 48 33 04 25 28 00 00 00 75 33 48 83 c4 10 5b c3 65 8a 05 5e 21 5e 76 84 c0 74 92 <0f> 0b eb 8e f0 80 4f 01 40 48 81 c7 00 14 00 00 e8 dd fb ff ff eb [709732.358972] RSP: 0018:ffffbb9700304740 EFLAGS: 00010202 [709732.358976] RAX: 0000000000000001 RBX: 0000000000000003 RCX: 0000000000000001 [709732.358979] RDX: ffffbb9700304970 RSI: ffff922fe1952e00 RDI: 0000000000000003 [709732.358981] RBP: ffffbb9700304970 R08: ffff922fc868a600 R09: ffff922fc711e462 [709732.358984] R10: 000000000000005f R11: ffff922ff0b27180 R12: ffffbb9700304960 [709732.358987] R13: ffffbb9700304b08 R14: ffff922fc664b6c8 R15: ffff922fc664b660 [709732.358990] FS: 0000000000000000(0000) GS:ffff92371fec0000(0000) knlGS:0000000000000000 [709732.358993] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [709732.358996] CR2: 0000557a6655bdd0 CR3: 000000026020a001 CR4: 00000000007706e0 [709732.358999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [709732.359001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [709732.359003] PKRU: 55555554 [709732.359005] Call Trace: [709732.359009] <IRQ> [709732.359035] nft_pipapo_avx2_lookup+0x4c/0x1cba [nf_tables] [709732.359046] ? sched_clock+0x5/0x10 [709732.359054] ? sched_clock_cpu+0xc/0xb0 [709732.359061] ? record_times+0x16/0x80 [709732.359068] ? plist_add+0xc1/0x100 [709732.359073] ? psi_group_change+0x47/0x230 [709732.359079] ? skb_clone+0x4d/0xb0 [709732.359085] ? enqueue_task_rt+0x22b/0x310 [709732.359098] ? bnxt_start_xmit+0x1e8/0xaf0 [bnxt_en] [709732.359102] ? packet_rcv+0x40/0x4a0 [709732.359121] nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359133] nft_do_chain+0x350/0x500 [nf_tables] [709732.359152] ? nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359163] ? nft_do_chain+0x364/0x500 [nf_tables] [709732.359172] ? fib4_rule_action+0x6d/0x80 [709732.359178] ? fib_rules_lookup+0x107/0x250 [709732.359184] nft_nat_do_chain+0x8a/0xf2 [nft_chain_nat] [709732.359193] nf_nat_inet_fn+0xea/0x210 [nf_nat] [709732.359202] nf_nat_ipv4_out+0x14/0xa0 [nf_nat] [709732.359207] nf_hook_slow+0x44/0xc0 [709732.359214] ip_output+0xd2/0x100 [709732.359221] ? __ip_finish_output+0x210/0x210 [709732.359226] ip_forward+0x37d/0x4a0 [709732.359232] ? ip4_key_hashfn+0xb0/0xb0 [709732.359238] ip_subli ---truncated---

In the Linux kernel, the following vulnerability has been resolved: arm64: entry: always set GIC_PRIO_PSR_I_SET during entry Zenghui reports that booting a kernel with "irqchip.gicv3_pseudo_nmi=1" on the command line hits a warning during kernel entry, due to the way we manipulate the PMR. Early in the entry sequence, we call lockdep_hardirqs_off() to inform lockdep that interrupts have been masked (as the HW sets DAIF wqhen entering an exception). Architecturally PMR_EL1 is not affected by exception entry, and we don't set GIC_PRIO_PSR_I_SET in the PMR early in the exception entry sequence, so early in exception entry the PMR can indicate that interrupts are unmasked even though they are masked by DAIF. If DEBUG_LOCKDEP is selected, lockdep_hardirqs_off() will check that interrupts are masked, before we set GIC_PRIO_PSR_I_SET in any of the exception entry paths, and hence lockdep_hardirqs_off() will WARN() that something is amiss. We can avoid this by consistently setting GIC_PRIO_PSR_I_SET during exception entry so that kernel code sees a consistent environment. We must also update local_daif_inherit() to undo this, as currently only touches DAIF. For other paths, local_daif_restore() will update both DAIF and the PMR. With this done, we can remove the existing special cases which set this later in the entry code. We always use (GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET) for consistency with local_daif_save(), as this will warn if it ever encounters (GIC_PRIO_IRQOFF | GIC_PRIO_PSR_I_SET), and never sets this itself. This matches the gic_prio_kentry_setup that we have to retain for ret_to_user. The original splat from Zenghui's report was: | DEBUG_LOCKS_WARN_ON(!irqs_disabled()) | WARNING: CPU: 3 PID: 125 at kernel/locking/lockdep.c:4258 lockdep_hardirqs_off+0xd4/0xe8 | Modules linked in: | CPU: 3 PID: 125 Comm: modprobe Tainted: G W 5.12.0-rc8+ #463 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 604003c5 (nZCv DAIF +PAN -UAO -TCO BTYPE=--) | pc : lockdep_hardirqs_off+0xd4/0xe8 | lr : lockdep_hardirqs_off+0xd4/0xe8 | sp : ffff80002a39bad0 | pmr_save: 000000e0 | x29: ffff80002a39bad0 x28: ffff0000de214bc0 | x27: ffff0000de1c0400 x26: 000000000049b328 | x25: 0000000000406f30 x24: ffff0000de1c00a0 | x23: 0000000020400005 x22: ffff8000105f747c | x21: 0000000096000044 x20: 0000000000498ef9 | x19: ffff80002a39bc88 x18: ffffffffffffffff | x17: 0000000000000000 x16: ffff800011c61eb0 | x15: ffff800011700a88 x14: 0720072007200720 | x13: 0720072007200720 x12: 0720072007200720 | x11: 0720072007200720 x10: 0720072007200720 | x9 : ffff80002a39bad0 x8 : ffff80002a39bad0 | x7 : ffff8000119f0800 x6 : c0000000ffff7fff | x5 : ffff8000119f07a8 x4 : 0000000000000001 | x3 : 9bcdab23f2432800 x2 : ffff800011730538 | x1 : 9bcdab23f2432800 x0 : 0000000000000000 | Call trace: | lockdep_hardirqs_off+0xd4/0xe8 | enter_from_kernel_mode.isra.5+0x7c/0xa8 | el1_abort+0x24/0x100 | el1_sync_handler+0x80/0xd0 | el1_sync+0x6c/0x100 | __arch_clear_user+0xc/0x90 | load_elf_binary+0x9fc/0x1450 | bprm_execve+0x404/0x880 | kernel_execve+0x180/0x188 | call_usermodehelper_exec_async+0xdc/0x158 | ret_from_fork+0x10/0x18

In the Linux kernel, the following vulnerability has been resolved: sched/fair: Prevent dead task groups from regaining cfs_rq's Kevin is reporting crashes which point to a use-after-free of a cfs_rq in update_blocked_averages(). Initial debugging revealed that we've live cfs_rq's (on_list=1) in an about to be kfree()'d task group in free_fair_sched_group(). However, it was unclear how that can happen. His kernel config happened to lead to a layout of struct sched_entity that put the 'my_q' member directly into the middle of the object which makes it incidentally overlap with SLUB's freelist pointer. That, in combination with SLAB_FREELIST_HARDENED's freelist pointer mangling, leads to a reliable access violation in form of a #GP which made the UAF fail fast. Michal seems to have run into the same issue[1]. He already correctly diagnosed that commit a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle") is causing the preconditions for the UAF to happen by re-adding cfs_rq's also to task groups that have no more running tasks, i.e. also to dead ones. His analysis, however, misses the real root cause and it cannot be seen from the crash backtrace only, as the real offender is tg_unthrottle_up() getting called via sched_cfs_period_timer() via the timer interrupt at an inconvenient time. When unregister_fair_sched_group() unlinks all cfs_rq's from the dying task group, it doesn't protect itself from getting interrupted. If the timer interrupt triggers while we iterate over all CPUs or after unregister_fair_sched_group() has finished but prior to unlinking the task group, sched_cfs_period_timer() will execute and walk the list of task groups, trying to unthrottle cfs_rq's, i.e. re-add them to the dying task group. These will later -- in free_fair_sched_group() -- be kfree()'ed while still being linked, leading to the fireworks Kevin and Michal are seeing. To fix this race, ensure the dying task group gets unlinked first. However, simply switching the order of unregistering and unlinking the task group isn't sufficient, as concurrent RCU walkers might still see it, as can be seen below: CPU1: CPU2: : timer IRQ: : do_sched_cfs_period_timer(): : : : distribute_cfs_runtime(): : rcu_read_lock(); : : : unthrottle_cfs_rq(): sched_offline_group(): : : walk_tg_tree_from(…,tg_unthrottle_up,…): list_del_rcu(&tg->list); : (1) : list_for_each_entry_rcu(child, &parent->children, siblings) : : (2) list_del_rcu(&tg->siblings); : : tg_unthrottle_up(): unregister_fair_sched_group(): struct cfs_rq *cfs_rq = tg->cfs_rq[cpu_of(rq)]; : : list_del_leaf_cfs_rq(tg->cfs_rq[cpu]); : : : : if (!cfs_rq_is_decayed(cfs_rq) || cfs_rq->nr_running) (3) : list_add_leaf_cfs_rq(cfs_rq); : : : : : : : : : ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ARM: footbridge: fix PCI interrupt mapping Since commit 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()"), the PCI code will call the IRQ mapping function whenever a PCI driver is probed. If these are marked as __init, this causes an oops if a PCI driver is loaded or bound after the kernel has initialised.

In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Fix warning caused by destroying non-initial netns After the commit 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces"), if the IPoIB device is moved to non-initial netns, destroying that netns lets the device vanish instead of moving it back to the initial netns, This is happening because default_device_exit() skips the interfaces due to having rtnl_link_ops set. Steps to reporoduce: ip netns add foo ip link set mlx5_ib0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 704 at net/core/dev.c:11435 netdev_exit+0x3f/0x50 Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun d fuse CPU: 1 PID: 704 Comm: kworker/u64:3 Tainted: G S W 5.13.0-rc1+ #1 Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016 Workqueue: netns cleanup_net RIP: 0010:netdev_exit+0x3f/0x50 Code: 48 8b bb 30 01 00 00 e8 ef 81 b1 ff 48 81 fb c0 3a 54 a1 74 13 48 8b 83 90 00 00 00 48 81 c3 90 00 00 00 48 39 d8 75 02 5b c3 <0f> 0b 5b c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 RSP: 0018:ffffb297079d7e08 EFLAGS: 00010206 RAX: ffff8eb542c00040 RBX: ffff8eb541333150 RCX: 000000008010000d RDX: 000000008010000e RSI: 000000008010000d RDI: ffff8eb440042c00 RBP: ffffb297079d7e48 R08: 0000000000000001 R09: ffffffff9fdeac00 R10: ffff8eb5003be000 R11: 0000000000000001 R12: ffffffffa1545620 R13: ffffffffa1545628 R14: 0000000000000000 R15: ffffffffa1543b20 FS: 0000000000000000(0000) GS:ffff8ed37fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005601b5f4c2e8 CR3: 0000001fc8c10002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ops_exit_list.isra.9+0x36/0x70 cleanup_net+0x234/0x390 process_one_work+0x1cb/0x360 ? process_one_work+0x360/0x360 worker_thread+0x30/0x370 ? process_one_work+0x360/0x360 kthread+0x116/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 To avoid the above warning and later on the kernel panic that could happen on shutdown due to a NULL pointer dereference, make sure to set the netns_refund flag that was introduced by commit 3a5ca857079e ("can: dev: Move device back to init netns on owning netns delete") to properly restore the IPoIB interfaces to the initial netns.

In the Linux kernel, the following vulnerability has been resolved: sfc: farch: fix TX queue lookup in TX event handling We're starting from a TXQ label, not a TXQ type, so efx_channel_get_tx_queue() is inappropriate (and could return NULL, leading to panics).

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix link timeout refs WARNING: CPU: 0 PID: 10242 at lib/refcount.c:28 refcount_warn_saturate+0x15b/0x1a0 lib/refcount.c:28 RIP: 0010:refcount_warn_saturate+0x15b/0x1a0 lib/refcount.c:28 Call Trace: __refcount_sub_and_test include/linux/refcount.h:283 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] io_put_req fs/io_uring.c:2140 [inline] io_queue_linked_timeout fs/io_uring.c:6300 [inline] __io_queue_sqe+0xbef/0xec0 fs/io_uring.c:6354 io_submit_sqe fs/io_uring.c:6534 [inline] io_submit_sqes+0x2bbd/0x7c50 fs/io_uring.c:6660 __do_sys_io_uring_enter fs/io_uring.c:9240 [inline] __se_sys_io_uring_enter+0x256/0x1d60 fs/io_uring.c:9182 io_link_timeout_fn() should put only one reference of the linked timeout request, however in case of racing with the master request's completion first io_req_complete() puts one and then io_put_req_deferred() is called.

In the Linux kernel, the following vulnerability has been resolved: net: zero-initialize tc skb extension on allocation Function skb_ext_add() doesn't initialize created skb extension with any value and leaves it up to the user. However, since extension of type TC_SKB_EXT originally contained only single value tc_skb_ext->chain its users used to just assign the chain value without setting whole extension memory to zero first. This assumption changed when TC_SKB_EXT extension was extended with additional fields but not all users were updated to initialize the new fields which leads to use of uninitialized memory afterwards. UBSAN log: [ 778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28 [ 778.301495] load of value 107 is not a valid value for type '_Bool' [ 778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2 [ 778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 778.307901] Call Trace: [ 778.308680] <IRQ> [ 778.309358] dump_stack+0xbb/0x107 [ 778.310307] ubsan_epilogue+0x5/0x40 [ 778.311167] __ubsan_handle_load_invalid_value.cold+0x43/0x48 [ 778.312454] ? memset+0x20/0x40 [ 778.313230] ovs_flow_key_extract.cold+0xf/0x14 [openvswitch] [ 778.314532] ovs_vport_receive+0x19e/0x2e0 [openvswitch] [ 778.315749] ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch] [ 778.317188] ? create_prof_cpu_mask+0x20/0x20 [ 778.318220] ? arch_stack_walk+0x82/0xf0 [ 778.319153] ? secondary_startup_64_no_verify+0xb0/0xbb [ 778.320399] ? stack_trace_save+0x91/0xc0 [ 778.321362] ? stack_trace_consume_entry+0x160/0x160 [ 778.322517] ? lock_release+0x52e/0x760 [ 778.323444] netdev_frame_hook+0x323/0x610 [openvswitch] [ 778.324668] ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch] [ 778.325950] __netif_receive_skb_core+0x771/0x2db0 [ 778.327067] ? lock_downgrade+0x6e0/0x6f0 [ 778.328021] ? lock_acquire+0x565/0x720 [ 778.328940] ? generic_xdp_tx+0x4f0/0x4f0 [ 778.329902] ? inet_gro_receive+0x2a7/0x10a0 [ 778.330914] ? lock_downgrade+0x6f0/0x6f0 [ 778.331867] ? udp4_gro_receive+0x4c4/0x13e0 [ 778.332876] ? lock_release+0x52e/0x760 [ 778.333808] ? dev_gro_receive+0xcc8/0x2380 [ 778.334810] ? lock_downgrade+0x6f0/0x6f0 [ 778.335769] __netif_receive_skb_list_core+0x295/0x820 [ 778.336955] ? process_backlog+0x780/0x780 [ 778.337941] ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core] [ 778.339613] ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0 [ 778.341033] ? kvm_clock_get_cycles+0x14/0x20 [ 778.342072] netif_receive_skb_list_internal+0x5f5/0xcb0 [ 778.343288] ? __kasan_kmalloc+0x7a/0x90 [ 778.344234] ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core] [ 778.345676] ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core] [ 778.347140] ? __netif_receive_skb_list_core+0x820/0x820 [ 778.348351] ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core] [ 778.349688] ? napi_gro_flush+0x26c/0x3c0 [ 778.350641] napi_complete_done+0x188/0x6b0 [ 778.351627] mlx5e_napi_poll+0x373/0x1b80 [mlx5_core] [ 778.352853] __napi_poll+0x9f/0x510 [ 778.353704] ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core] [ 778.355158] net_rx_action+0x34c/0xa40 [ 778.356060] ? napi_threaded_poll+0x3d0/0x3d0 [ 778.357083] ? sched_clock_cpu+0x18/0x190 [ 778.358041] ? __common_interrupt+0x8e/0x1a0 [ 778.359045] __do_softirq+0x1ce/0x984 [ 778.359938] __irq_exit_rcu+0x137/0x1d0 [ 778.360865] irq_exit_rcu+0xa/0x20 [ 778.361708] common_interrupt+0x80/0xa0 [ 778.362640] </IRQ> [ 778.363212] asm_common_interrupt+0x1e/0x40 [ 778.364204] RIP: 0010:native_safe_halt+0xe/0x10 [ 778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00 [ 778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246 [ 778.370570] RAX ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: hns3: put off calling register_netdev() until client initialize complete Currently, the netdevice is registered before client initializing complete. So there is a timewindow between netdevice available and usable. In this case, if user try to change the channel number or ring param, it may cause the hns3_set_rx_cpu_rmap() being called twice, and report bug. [47199.416502] hns3 0000:35:00.0 eth1: set channels: tqp_num=1, rxfh=0 [47199.430340] hns3 0000:35:00.0 eth1: already uninitialized [47199.438554] hns3 0000:35:00.0: rss changes from 4 to 1 [47199.511854] hns3 0000:35:00.0: Channels changed, rss_size from 4 to 1, tqps from 4 to 1 [47200.163524] ------------[ cut here ]------------ [47200.171674] kernel BUG at lib/cpu_rmap.c:142! [47200.177847] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [47200.185259] Modules linked in: hclge(+) hns3(-) hns3_cae(O) hns_roce_hw_v2 hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [last unloaded: hclge] [47200.205912] CPU: 1 PID: 8260 Comm: ethtool Tainted: G O 5.11.0-rc3+ #1 [47200.215601] Hardware name: , xxxxxx 02/04/2021 [47200.223052] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [47200.230188] pc : cpu_rmap_add+0x38/0x40 [47200.237472] lr : irq_cpu_rmap_add+0x84/0x140 [47200.243291] sp : ffff800010e93a30 [47200.247295] x29: ffff800010e93a30 x28: ffff082100584880 [47200.254155] x27: 0000000000000000 x26: 0000000000000000 [47200.260712] x25: 0000000000000000 x24: 0000000000000004 [47200.267241] x23: ffff08209ba03000 x22: ffff08209ba038c0 [47200.273789] x21: 000000000000003f x20: ffff0820e2bc1680 [47200.280400] x19: ffff0820c970ec80 x18: 00000000000000c0 [47200.286944] x17: 0000000000000000 x16: ffffb43debe4a0d0 [47200.293456] x15: fffffc2082990600 x14: dead000000000122 [47200.300059] x13: ffffffffffffffff x12: 000000000000003e [47200.306606] x11: ffff0820815b8080 x10: ffff53e411988000 [47200.313171] x9 : 0000000000000000 x8 : ffff0820e2bc1700 [47200.319682] x7 : 0000000000000000 x6 : 000000000000003f [47200.326170] x5 : 0000000000000040 x4 : ffff800010e93a20 [47200.332656] x3 : 0000000000000004 x2 : ffff0820c970ec80 [47200.339168] x1 : ffff0820e2bc1680 x0 : 0000000000000004 [47200.346058] Call trace: [47200.349324] cpu_rmap_add+0x38/0x40 [47200.354300] hns3_set_rx_cpu_rmap+0x6c/0xe0 [hns3] [47200.362294] hns3_reset_notify_init_enet+0x1cc/0x340 [hns3] [47200.370049] hns3_change_channels+0x40/0xb0 [hns3] [47200.376770] hns3_set_channels+0x12c/0x2a0 [hns3] [47200.383353] ethtool_set_channels+0x140/0x250 [47200.389772] dev_ethtool+0x714/0x23d0 [47200.394440] dev_ioctl+0x4cc/0x640 [47200.399277] sock_do_ioctl+0x100/0x2a0 [47200.404574] sock_ioctl+0x28c/0x470 [47200.409079] __arm64_sys_ioctl+0xb4/0x100 [47200.415217] el0_svc_common.constprop.0+0x84/0x210 [47200.422088] do_el0_svc+0x28/0x34 [47200.426387] el0_svc+0x28/0x70 [47200.431308] el0_sync_handler+0x1a4/0x1b0 [47200.436477] el0_sync+0x174/0x180 [47200.441562] Code: 11000405 79000c45 f8247861 d65f03c0 (d4210000) [47200.448869] ---[ end trace a01efe4ce42e5f34 ]--- The process is like below: excuting hns3_client_init | register_netdev() | hns3_set_channels() | | hns3_set_rx_cpu_rmap() hns3_reset_notify_uninit_enet() | | | quit without calling function | hns3_free_rx_cpu_rmap for flag | HNS3_NIC_STATE_INITED is unset. | | | hns3_reset_notify_init_enet() | | set HNS3_NIC_STATE_INITED call hns3_set_rx_cpu_rmap()-- crash Fix it by calling register_netdev() at the end of function hns3_client_init().

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Fix NULL pointer dereference for ->get_features() get_features ops of pci_epc_ops may return NULL, causing NULL pointer dereference in pci_epf_test_alloc_space function. Let us add a check for pci_epc_feature pointer in pci_epf_test_bind before we access it to avoid any such NULL pointer dereference and return -ENOTSUPP in case pci_epc_feature is not found. When the patch is not applied and EPC features is not implemented in the platform driver, we see the following dump due to kernel NULL pointer dereference. Call trace: pci_epf_test_bind+0xf4/0x388 pci_epf_bind+0x3c/0x80 pci_epc_epf_link+0xa8/0xcc configfs_symlink+0x1a4/0x48c vfs_symlink+0x104/0x184 do_symlinkat+0x80/0xd4 __arm64_sys_symlinkat+0x1c/0x24 el0_svc_common.constprop.3+0xb8/0x170 el0_svc_handler+0x70/0x88 el0_svc+0x8/0x640 Code: d2800581 b9403ab9 f9404ebb 8b394f60 (f9400400) ---[ end trace a438e3c5a24f9df0 ]---

In the Linux kernel, the following vulnerability has been resolved: udf: Fix NULL pointer dereference in udf_symlink function In function udf_symlink, epos.bh is assigned with the value returned by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c and returns the value of sb_getblk function that could be NULL. Then, epos.bh is used without any check, causing a possible NULL pointer dereference when sb_getblk fails. This fix adds a check to validate the value of epos.bh.

In the Linux kernel, the following vulnerability has been resolved: NFS: fix an incorrect limit in filelayout_decode_layout() The "sizeof(struct nfs_fh)" is two bytes too large and could lead to memory corruption. It should be NFS_MAXFHSIZE because that's the size of the ->data[] buffer. I reversed the size of the arguments to put the variable on the left.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL ptr dereference on VSI filter sync Remove the reason of null pointer dereference in sync VSI filters. Added new I40E_VSI_RELEASING flag to signalize deleting and releasing of VSI resources to sync this thread with sync filters subtask. Without this patch it is possible to start update the VSI filter list after VSI is removed, that's causing a kernel oops.

In the Linux kernel, the following vulnerability has been resolved: spi: fix use-after-free of the add_lock mutex Commit 6098475d4cb4 ("spi: Fix deadlock when adding SPI controllers on SPI buses") introduced a per-controller mutex. But mutex_unlock() of said lock is called after the controller is already freed: spi_unregister_controller(ctlr) -> put_device(&ctlr->dev) -> spi_controller_release(dev) -> mutex_unlock(&ctrl->add_lock) Move the put_device() after the mutex_unlock().

In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Disable preemption when probing user return MSRs Disable preemption when probing a user return MSR via RDSMR/WRMSR. If the MSR holds a different value per logical CPU, the WRMSR could corrupt the host's value if KVM is preempted between the RDMSR and WRMSR, and then rescheduled on a different CPU. Opportunistically land the helper in common x86, SVM will use the helper in a future commit.

In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handler Patch fixes the following critical issue caused by deadlock which has been detected during testing NCM class: smp: csd: Detected non-responsive CSD lock (#1) on CPU#0 smp: csd: CSD lock (#1) unresponsive. .... RIP: 0010:native_queued_spin_lock_slowpath+0x61/0x1d0 RSP: 0018:ffffbc494011cde0 EFLAGS: 00000002 RAX: 0000000000000101 RBX: ffff9ee8116b4a68 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ee8116b4658 RBP: ffffbc494011cde0 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658 R13: ffff9ee8116b4670 R14: 0000000000000246 R15: ffff9ee8116b4658 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7bcc41a830 CR3: 000000007a612003 CR4: 00000000001706e0 Call Trace: <IRQ> do_raw_spin_lock+0xc0/0xd0 _raw_spin_lock_irqsave+0x95/0xa0 cdnsp_gadget_ep_queue.cold+0x88/0x107 [cdnsp_udc_pci] usb_ep_queue+0x35/0x110 eth_start_xmit+0x220/0x3d0 [u_ether] ncm_tx_timeout+0x34/0x40 [usb_f_ncm] ? ncm_free_inst+0x50/0x50 [usb_f_ncm] __hrtimer_run_queues+0xac/0x440 hrtimer_run_softirq+0x8c/0xb0 __do_softirq+0xcf/0x428 asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x61/0x70 irq_exit_rcu+0xc1/0xd0 sysvec_apic_timer_interrupt+0x52/0xb0 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0010:do_raw_spin_trylock+0x18/0x40 RSP: 0018:ffffbc494138bda8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff9ee8116b4658 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9ee8116b4658 RBP: ffffbc494138bda8 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658 R13: ffff9ee8116b4670 R14: ffff9ee7b5c73d80 R15: ffff9ee8116b4000 _raw_spin_lock+0x3d/0x70 ? cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci] cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci] ? cdnsp_remove_request+0x1f0/0x1f0 [cdnsp_udc_pci] ? cdnsp_thread_irq_handler+0x5/0xa0 [cdnsp_udc_pci] ? irq_thread+0xa0/0x1c0 irq_thread_fn+0x28/0x60 irq_thread+0x105/0x1c0 ? __kthread_parkme+0x42/0x90 ? irq_forced_thread_fn+0x90/0x90 ? wake_threads_waitq+0x30/0x30 ? irq_thread_check_affinity+0xe0/0xe0 kthread+0x12a/0x160 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 The root cause of issue is spin_lock/spin_unlock instruction instead spin_lock_irqsave/spin_lock_irqrestore in cdnsp_thread_irq_handler function.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: CT, Fix multiple allocations and memleak of mod acts CT clear action offload adds additional mod hdr actions to the flow's original mod actions in order to clear the registers which hold ct_state. When such flow also includes encap action, a neigh update event can cause the driver to unoffload the flow and then reoffload it. Each time this happens, the ct clear handling adds that same set of mod hdr actions to reset ct_state until the max of mod hdr actions is reached. Also the driver never releases the allocated mod hdr actions and causing a memleak. Fix above two issues by moving CT clear mod acts allocation into the parsing actions phase and only use it when offloading the rule. The release of mod acts will be done in the normal flow_put(). backtrace: [<000000007316e2f3>] krealloc+0x83/0xd0 [<00000000ef157de1>] mlx5e_mod_hdr_alloc+0x147/0x300 [mlx5_core] [<00000000970ce4ae>] mlx5e_tc_match_to_reg_set_and_get_id+0xd7/0x240 [mlx5_core] [<0000000067c5fa17>] mlx5e_tc_match_to_reg_set+0xa/0x20 [mlx5_core] [<00000000d032eb98>] mlx5_tc_ct_entry_set_registers.isra.0+0x36/0xc0 [mlx5_core] [<00000000fd23b869>] mlx5_tc_ct_flow_offload+0x272/0x1f10 [mlx5_core] [<000000004fc24acc>] mlx5e_tc_offload_fdb_rules.part.0+0x150/0x620 [mlx5_core] [<00000000dc741c17>] mlx5e_tc_encap_flows_add+0x489/0x690 [mlx5_core] [<00000000e92e49d7>] mlx5e_rep_update_flows+0x6e4/0x9b0 [mlx5_core] [<00000000f60f5602>] mlx5e_rep_neigh_update+0x39a/0x5d0 [mlx5_core]

In the Linux kernel before 6.5.9, there is a NULL pointer dereference in send_acknowledge in net/nfc/nci/spi.c.

In the Linux kernel, the following vulnerability has been resolved: can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate The conclusion "j1939_session_deactivate() should be called with a session ref-count of at least 2" is incorrect. In some concurrent scenarios, j1939_session_deactivate can be called with the session ref-count less than 2. But there is not any problem because it will check the session active state before session putting in j1939_session_deactivate_locked(). Here is the concurrent scenario of the problem reported by syzbot and my reproduction log. cpu0 cpu1 j1939_xtp_rx_eoma j1939_xtp_rx_abort_one j1939_session_get_by_addr [kref == 2] j1939_session_get_by_addr [kref == 3] j1939_session_deactivate [kref == 2] j1939_session_put [kref == 1] j1939_session_completed j1939_session_deactivate WARN_ON_ONCE(kref < 2) ===================================================== WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70 CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:j1939_session_deactivate+0x5f/0x70 Call Trace: j1939_session_deactivate_activate_next+0x11/0x28 j1939_xtp_rx_eoma+0x12a/0x180 j1939_tp_recv+0x4a2/0x510 j1939_can_recv+0x226/0x380 can_rcv_filter+0xf8/0x220 can_receive+0x102/0x220 ? process_backlog+0xf0/0x2c0 can_rcv+0x53/0xf0 __netif_receive_skb_one_core+0x67/0x90 ? process_backlog+0x97/0x2c0 __netif_receive_skb+0x22/0x80

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix a potential gpu_metrics_table memory leak Memory is allocated for gpu_metrics_table in renoir_init_smc_tables(), but not freed in int smu_v12_0_fini_smc_tables(). Free it!

An issue was discovered in the Linux kernel before 5.14.15. There is an array-index-out-of-bounds flaw in the detach_capi_ctr function in drivers/isdn/capi/kcapi.c.

In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Use code segment selector for VERW operand Robert Gill reported below #GP in 32-bit mode when dosemu software was executing vm86() system call: general protection fault: 0000 [#1] PREEMPT SMP CPU: 4 PID: 4610 Comm: dosemu.bin Not tainted 6.6.21-gentoo-x86 #1 Hardware name: Dell Inc. PowerEdge 1950/0H723K, BIOS 2.7.0 10/30/2010 EIP: restore_all_switch_stack+0xbe/0xcf EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: ff8affdc DS: 0000 ES: 0000 FS: 0000 GS: 0033 SS: 0068 EFLAGS: 00010046 CR0: 80050033 CR2: 00c2101c CR3: 04b6d000 CR4: 000406d0 Call Trace: show_regs+0x70/0x78 die_addr+0x29/0x70 exc_general_protection+0x13c/0x348 exc_bounds+0x98/0x98 handle_exception+0x14d/0x14d exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf This only happens in 32-bit mode when VERW based mitigations like MDS/RFDS are enabled. This is because segment registers with an arbitrary user value can result in #GP when executing VERW. Intel SDM vol. 2C documents the following behavior for VERW instruction: #GP(0) - If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. CLEAR_CPU_BUFFERS macro executes VERW instruction before returning to user space. Use %cs selector to reference VERW operand. This ensures VERW will not #GP for an arbitrary user %ds. [ mingo: Fixed the SOB chain. ]

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Stop the active perfmon before being destroyed When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it.

An issue was discovered in the Linux kernel for powerpc before 5.14.15. It allows a malicious KVM guest to crash the host, when the host is running on Power8, due to an arch/powerpc/kvm/book3s_hv_rmhandlers.S implementation bug in the handling of the SRR1 register values.

In the Linux kernel, the following vulnerability has been resolved: btrfs: output extra debug info if we failed to find an inline backref [BUG] Syzbot reported several warning triggered inside lookup_inline_extent_backref(). [CAUSE] As usual, the reproducer doesn't reliably trigger locally here, but at least we know the WARN_ON() is triggered when an inline backref can not be found, and it can only be triggered when @insert is true. (I.e. inserting a new inline backref, which means the backref should already exist) [ENHANCEMENT] After the WARN_ON(), dump all the parameters and the extent tree leaf to help debug.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: remove unreasonable unlock in ocfs2_read_blocks Patch series "Misc fixes for ocfs2_read_blocks", v5. This series contains 2 fixes for ocfs2_read_blocks(). The first patch fix the issue reported by syzbot, which detects bad unlock balance in ocfs2_read_blocks(). The second patch fixes an issue reported by Heming Zhao when reviewing above fix. This patch (of 2): There was a lock release before exiting, so remove the unreasonable unlock.

There is a flaw in polkit which can allow an unprivileged user to cause polkit to crash, due to process file descriptor exhaustion. The highest threat from this vulnerability is to availability. NOTE: Polkit process outage duration is tied to the failing process being reaped and a new one being spawned

In the Linux kernel, the following vulnerability has been resolved: md/raid10: prevent soft lockup while flush writes Currently, there is no limit for raid1/raid10 plugged bio. While flushing writes, raid1 has cond_resched() while raid10 doesn't, and too many writes can cause soft lockup. Follow up soft lockup can be triggered easily with writeback test for raid10 with ramdisks: watchdog: BUG: soft lockup - CPU#10 stuck for 27s! [md0_raid10:1293] Call Trace: <TASK> call_rcu+0x16/0x20 put_object+0x41/0x80 __delete_object+0x50/0x90 delete_object_full+0x2b/0x40 kmemleak_free+0x46/0xa0 slab_free_freelist_hook.constprop.0+0xed/0x1a0 kmem_cache_free+0xfd/0x300 mempool_free_slab+0x1f/0x30 mempool_free+0x3a/0x100 bio_free+0x59/0x80 bio_put+0xcf/0x2c0 free_r10bio+0xbf/0xf0 raid_end_bio_io+0x78/0xb0 one_write_done+0x8a/0xa0 raid10_end_write_request+0x1b4/0x430 bio_endio+0x175/0x320 brd_submit_bio+0x3b9/0x9b7 [brd] __submit_bio+0x69/0xe0 submit_bio_noacct_nocheck+0x1e6/0x5a0 submit_bio_noacct+0x38c/0x7e0 flush_pending_writes+0xf0/0x240 raid10d+0xac/0x1ed0 Fix the problem by adding cond_resched() to raid10 like what raid1 did. Note that unlimited plugged bio still need to be optimized, for example, in the case of lots of dirty pages writeback, this will take lots of memory and io will spend a long time in plug, hence io latency is bad.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: tegra: fix sleep in atomic call When we set the dual-role port to Host mode, we observed the following splat: [ 167.057718] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:229 [ 167.057872] Workqueue: events tegra_xusb_usb_phy_work [ 167.057954] Call trace: [ 167.057962] dump_backtrace+0x0/0x210 [ 167.057996] show_stack+0x30/0x50 [ 167.058020] dump_stack_lvl+0x64/0x84 [ 167.058065] dump_stack+0x14/0x34 [ 167.058100] __might_resched+0x144/0x180 [ 167.058140] __might_sleep+0x64/0xd0 [ 167.058171] slab_pre_alloc_hook.constprop.0+0xa8/0x110 [ 167.058202] __kmalloc_track_caller+0x74/0x2b0 [ 167.058233] kvasprintf+0xa4/0x190 [ 167.058261] kasprintf+0x58/0x90 [ 167.058285] tegra_xusb_find_port_node.isra.0+0x58/0xd0 [ 167.058334] tegra_xusb_find_port+0x38/0xa0 [ 167.058380] tegra_xusb_padctl_get_usb3_companion+0x38/0xd0 [ 167.058430] tegra_xhci_id_notify+0x8c/0x1e0 [ 167.058473] notifier_call_chain+0x88/0x100 [ 167.058506] atomic_notifier_call_chain+0x44/0x70 [ 167.058537] tegra_xusb_usb_phy_work+0x60/0xd0 [ 167.058581] process_one_work+0x1dc/0x4c0 [ 167.058618] worker_thread+0x54/0x410 [ 167.058650] kthread+0x188/0x1b0 [ 167.058672] ret_from_fork+0x10/0x20 The function tegra_xusb_padctl_get_usb3_companion eventually calls tegra_xusb_find_port and this in turn calls kasprintf which might sleep and so cannot be called from an atomic context. Fix this by moving the call to tegra_xusb_padctl_get_usb3_companion to the tegra_xhci_id_work function where it is really needed.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini The gmc.ecc_irq is enabled by firmware per IFWI setting, and the host driver is not privileged to enable/disable the interrupt. So, it is meaningless to use the amdgpu_irq_put function in gmc_v11_0_hw_fini, which also leads to the call trace. [ 102.980303] Call Trace: [ 102.980303] <TASK> [ 102.980304] gmc_v11_0_hw_fini+0x54/0x90 [amdgpu] [ 102.980357] gmc_v11_0_suspend+0xe/0x20 [amdgpu] [ 102.980409] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu] [ 102.980459] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu] [ 102.980520] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu] [ 102.980573] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu] [ 102.980687] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu] [ 102.980740] process_one_work+0x21f/0x3f0 [ 102.980741] worker_thread+0x200/0x3e0 [ 102.980742] ? process_one_work+0x3f0/0x3f0 [ 102.980743] kthread+0xfd/0x130 [ 102.980743] ? kthread_complete_and_exit+0x20/0x20 [ 102.980744] ret_from_fork+0x22/0x30

In the Linux kernel, the following vulnerability has been resolved: mm: multi-gen LRU: fix crash during cgroup migration lru_gen_migrate_mm() assumes lru_gen_add_mm() runs prior to itself. This isn't true for the following scenario: CPU 1 CPU 2 clone() cgroup_can_fork() cgroup_procs_write() cgroup_post_fork() task_lock() lru_gen_migrate_mm() task_unlock() task_lock() lru_gen_add_mm() task_unlock() And when the above happens, kernel crashes because of linked list corruption (mm_struct->lru_gen.list).

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Do not try to cleanup after cxl_region_setup_targets() fails Commit 5e42bcbc3fef ("cxl/region: decrement ->nr_targets on error in cxl_region_attach()") tried to avoid 'eiw' initialization errors when ->nr_targets exceeded 16, by just decrementing ->nr_targets when cxl_region_setup_targets() failed. Commit 86987c766276 ("cxl/region: Cleanup target list on attach error") extended that cleanup to also clear cxled->pos and p->targets[pos]. The initialization error was incidentally fixed separately by: Commit 8d4285425714 ("cxl/region: Fix port setup uninitialized variable warnings") which was merged a few days after 5e42bcbc3fef. But now the original cleanup when cxl_region_setup_targets() fails prevents endpoint and switch decoder resources from being reused: 1) the cleanup does not set the decoder's region to NULL, which results in future dpa_size_store() calls returning -EBUSY 2) the decoder is not properly freed, which results in future commit errors associated with the upstream switch Now that the initialization errors were fixed separately, the proper cleanup for this case is to just return immediately. Then the resources associated with this target get cleanup up as normal when the failed region is deleted. The ->nr_targets decrement in the error case also helped prevent a p->targets[] array overflow, so add a new check to prevent against that overflow. Tested by trying to create an invalid region for a 2 switch * 2 endpoint topology, and then following up with creating a valid region.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential null pointer derefernce The amdgpu_ras_get_context may return NULL if device not support ras feature, so add check before using.

In the Linux kernel, the following vulnerability has been resolved: USB: ULPI: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix sysfs interface lifetime The current nilfs2 sysfs support has issues with the timing of creation and deletion of sysfs entries, potentially leading to null pointer dereferences, use-after-free, and lockdep warnings. Some of the sysfs attributes for nilfs2 per-filesystem instance refer to metadata file "cpfile", "sufile", or "dat", but nilfs_sysfs_create_device_group that creates those attributes is executed before the inodes for these metadata files are loaded, and nilfs_sysfs_delete_device_group which deletes these sysfs entries is called after releasing their metadata file inodes. Therefore, access to some of these sysfs attributes may occur outside of the lifetime of these metadata files, resulting in inode NULL pointer dereferences or use-after-free. In addition, the call to nilfs_sysfs_create_device_group() is made during the locking period of the semaphore "ns_sem" of nilfs object, so the shrinker call caused by the memory allocation for the sysfs entries, may derive lock dependencies "ns_sem" -> (shrinker) -> "locks acquired in nilfs_evict_inode()". Since nilfs2 may acquire "ns_sem" deep in the call stack holding other locks via its error handler __nilfs_error(), this causes lockdep to report circular locking. This is a false positive and no circular locking actually occurs as no inodes exist yet when nilfs_sysfs_create_device_group() is called. Fortunately, the lockdep warnings can be resolved by simply moving the call to nilfs_sysfs_create_device_group() out of "ns_sem". This fixes these sysfs issues by revising where the device's sysfs interface is created/deleted and keeping its lifetime within the lifetime of the metadata files above.

In the Linux kernel, the following vulnerability has been resolved: null_blk: fix poll request timeout handling When doing io_uring benchmark on /dev/nullb0, it's easy to crash the kernel if poll requests timeout triggered, as reported by David. [1] BUG: kernel NULL pointer dereference, address: 0000000000000008 Workqueue: kblockd blk_mq_timeout_work RIP: 0010:null_timeout_rq+0x4e/0x91 Call Trace: ? null_timeout_rq+0x4e/0x91 blk_mq_handle_expired+0x31/0x4b bt_iter+0x68/0x84 ? bt_tags_iter+0x81/0x81 __sbitmap_for_each_set.constprop.0+0xb0/0xf2 ? __blk_mq_complete_request_remote+0xf/0xf bt_for_each+0x46/0x64 ? __blk_mq_complete_request_remote+0xf/0xf ? percpu_ref_get_many+0xc/0x2a blk_mq_queue_tag_busy_iter+0x14d/0x18e blk_mq_timeout_work+0x95/0x127 process_one_work+0x185/0x263 worker_thread+0x1b5/0x227 This is indeed a race problem between null_timeout_rq() and null_poll(). null_poll() null_timeout_rq() spin_lock(&nq->poll_lock) list_splice_init(&nq->poll_list, &list) spin_unlock(&nq->poll_lock) while (!list_empty(&list)) req = list_first_entry() list_del_init() ... blk_mq_add_to_batch() // req->rq_next = NULL spin_lock(&nq->poll_lock) // rq->queuelist->next == NULL list_del_init(&rq->queuelist) spin_unlock(&nq->poll_lock) Fix these problems by setting requests state to MQ_RQ_COMPLETE under nq->poll_lock protection, in which null_timeout_rq() can safely detect this race and early return. Note this patch just fix the kernel panic when request timeout happen. [1] https://lore.kernel.org/all/3893581.1691785261@warthog.procyon.org.uk/

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix deinitialization of firmware resources Currently, in ath11k_ahb_fw_resources_init(), iommu domain mapping is done only for the chipsets having fixed firmware memory. Also, for such chipsets, mapping is done only if it does not have TrustZone support. During deinitialization, only if TrustZone support is not there, iommu is unmapped back. However, for non fixed firmware memory chipsets, TrustZone support is not there and this makes the condition check to true and it tries to unmap the memory which was not mapped during initialization. This leads to the following trace - [ 83.198790] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 83.259537] Modules linked in: ath11k_ahb ath11k qmi_helpers .. snip .. [ 83.280286] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 83.287228] pc : __iommu_unmap+0x30/0x140 [ 83.293907] lr : iommu_unmap+0x5c/0xa4 [ 83.298072] sp : ffff80000b3abad0 .. snip .. [ 83.369175] Call trace: [ 83.376282] __iommu_unmap+0x30/0x140 [ 83.378541] iommu_unmap+0x5c/0xa4 [ 83.382360] ath11k_ahb_fw_resource_deinit.part.12+0x2c/0xac [ath11k_ahb] [ 83.385666] ath11k_ahb_free_resources+0x140/0x17c [ath11k_ahb] [ 83.392521] ath11k_ahb_shutdown+0x34/0x40 [ath11k_ahb] [ 83.398248] platform_shutdown+0x20/0x2c [ 83.403455] device_shutdown+0x16c/0x1c4 [ 83.407621] kernel_restart_prepare+0x34/0x3c [ 83.411529] kernel_restart+0x14/0x74 [ 83.415781] __do_sys_reboot+0x1c4/0x22c [ 83.419427] __arm64_sys_reboot+0x1c/0x24 [ 83.423420] invoke_syscall+0x44/0xfc [ 83.427326] el0_svc_common.constprop.3+0xac/0xe8 [ 83.430974] do_el0_svc+0xa0/0xa8 [ 83.435659] el0_svc+0x1c/0x44 [ 83.438957] el0t_64_sync_handler+0x60/0x144 [ 83.441910] el0t_64_sync+0x15c/0x160 [ 83.446343] Code: aa0103f4 f9400001 f90027a1 d2800001 (f94006a0) [ 83.449903] ---[ end trace 0000000000000000 ]--- This can be reproduced by probing an AHB chipset which is not having a fixed memory region. During reboot (or rmmod) trace can be seen. Fix this issue by adding a condition check on firmware fixed memory hw_param as done in the counter initialization function. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Fix wrong check in update_parent_subparts_cpumask() It was found that the check to see if a partition could use up all the cpus from the parent cpuset in update_parent_subparts_cpumask() was incorrect. As a result, it is possible to leave parent with no effective cpu left even if there are tasks in the parent cpuset. This can lead to system panic as reported in [1]. Fix this probem by updating the check to fail the enabling the partition if parent's effective_cpus is a subset of the child's cpus_allowed. Also record the error code when an error happens in update_prstate() and add a test case where parent partition and child have the same cpu list and parent has task. Enabling partition in the child will fail in this case. [1] https://www.spinics.net/lists/cgroups/msg36254.html

In the Linux kernel, the following vulnerability has been resolved: ext4: fix WARNING in mb_find_extent Syzbot found the following issue: EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, O_DIRECT and fast_commit support! EXT4-fs (loop0): orphan cleanup on readonly fs ------------[ cut here ]------------ WARNING: CPU: 1 PID: 5067 at fs/ext4/mballoc.c:1869 mb_find_extent+0x8a1/0xe30 Modules linked in: CPU: 1 PID: 5067 Comm: syz-executor307 Not tainted 6.2.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:mb_find_extent+0x8a1/0xe30 fs/ext4/mballoc.c:1869 RSP: 0018:ffffc90003c9e098 EFLAGS: 00010293 RAX: ffffffff82405731 RBX: 0000000000000041 RCX: ffff8880783457c0 RDX: 0000000000000000 RSI: 0000000000000041 RDI: 0000000000000040 RBP: 0000000000000040 R08: ffffffff82405723 R09: ffffed10053c9402 R10: ffffed10053c9402 R11: 1ffff110053c9401 R12: 0000000000000000 R13: ffffc90003c9e538 R14: dffffc0000000000 R15: ffffc90003c9e2cc FS: 0000555556665300(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056312f6796f8 CR3: 0000000022437000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ext4_mb_complex_scan_group+0x353/0x1100 fs/ext4/mballoc.c:2307 ext4_mb_regular_allocator+0x1533/0x3860 fs/ext4/mballoc.c:2735 ext4_mb_new_blocks+0xddf/0x3db0 fs/ext4/mballoc.c:5605 ext4_ext_map_blocks+0x1868/0x6880 fs/ext4/extents.c:4286 ext4_map_blocks+0xa49/0x1cc0 fs/ext4/inode.c:651 ext4_getblk+0x1b9/0x770 fs/ext4/inode.c:864 ext4_bread+0x2a/0x170 fs/ext4/inode.c:920 ext4_quota_write+0x225/0x570 fs/ext4/super.c:7105 write_blk fs/quota/quota_tree.c:64 [inline] get_free_dqblk+0x34a/0x6d0 fs/quota/quota_tree.c:130 do_insert_tree+0x26b/0x1aa0 fs/quota/quota_tree.c:340 do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375 do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375 do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375 dq_insert_tree fs/quota/quota_tree.c:401 [inline] qtree_write_dquot+0x3b6/0x530 fs/quota/quota_tree.c:420 v2_write_dquot+0x11b/0x190 fs/quota/quota_v2.c:358 dquot_acquire+0x348/0x670 fs/quota/dquot.c:444 ext4_acquire_dquot+0x2dc/0x400 fs/ext4/super.c:6740 dqget+0x999/0xdc0 fs/quota/dquot.c:914 __dquot_initialize+0x3d0/0xcf0 fs/quota/dquot.c:1492 ext4_process_orphan+0x57/0x2d0 fs/ext4/orphan.c:329 ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474 __ext4_fill_super fs/ext4/super.c:5516 [inline] ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644 get_tree_bdev+0x400/0x620 fs/super.c:1282 vfs_get_tree+0x88/0x270 fs/super.c:1489 do_new_mount+0x289/0xad0 fs/namespace.c:3145 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Add some debug information: mb_find_extent: mb_find_extent block=41, order=0 needed=64 next=0 ex=0/41/1@3735929054 64 64 7 block_bitmap: ff 3f 0c 00 fc 01 00 00 d2 3d 00 00 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Acctually, blocks per group is 64, but block bitmap indicate at least has 128 blocks. Now, ext4_validate_block_bitmap() didn't check invalid block's bitmap if set. To resolve above issue, add check like fsck "Padding at end of block bitmap is not set".

In the Linux kernel, the following vulnerability has been resolved: iavf: fix hang on reboot with ice When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown().

In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer In af9035_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9035_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

In the Linux kernel, the following vulnerability has been resolved: srcu: Delegate work to the boot cpu if using SRCU_SIZE_SMALL Commit 994f706872e6 ("srcu: Make Tree SRCU able to operate without snp_node array") assumes that cpu 0 is always online. However, there really are situations when some other CPU is the boot CPU, for example, when booting a kdump kernel with the maxcpus=1 boot parameter. On PowerPC, the kdump kernel can hang as follows: ... [ 1.740036] systemd[1]: Hostname set to <xyz.com> [ 243.686240] INFO: task systemd:1 blocked for more than 122 seconds. [ 243.686264] Not tainted 6.1.0-rc1 #1 [ 243.686272] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 243.686281] task:systemd state:D stack:0 pid:1 ppid:0 flags:0x00042000 [ 243.686296] Call Trace: [ 243.686301] [c000000016657640] [c000000016657670] 0xc000000016657670 (unreliable) [ 243.686317] [c000000016657830] [c00000001001dec0] __switch_to+0x130/0x220 [ 243.686333] [c000000016657890] [c000000010f607b8] __schedule+0x1f8/0x580 [ 243.686347] [c000000016657940] [c000000010f60bb4] schedule+0x74/0x140 [ 243.686361] [c0000000166579b0] [c000000010f699b8] schedule_timeout+0x168/0x1c0 [ 243.686374] [c000000016657a80] [c000000010f61de8] __wait_for_common+0x148/0x360 [ 243.686387] [c000000016657b20] [c000000010176bb0] __flush_work.isra.0+0x1c0/0x3d0 [ 243.686401] [c000000016657bb0] [c0000000105f2768] fsnotify_wait_marks_destroyed+0x28/0x40 [ 243.686415] [c000000016657bd0] [c0000000105f21b8] fsnotify_destroy_group+0x68/0x160 [ 243.686428] [c000000016657c40] [c0000000105f6500] inotify_release+0x30/0xa0 [ 243.686440] [c000000016657cb0] [c0000000105751a8] __fput+0xc8/0x350 [ 243.686452] [c000000016657d00] [c00000001017d524] task_work_run+0xe4/0x170 [ 243.686464] [c000000016657d50] [c000000010020e94] do_notify_resume+0x134/0x140 [ 243.686478] [c000000016657d80] [c00000001002eb18] interrupt_exit_user_prepare_main+0x198/0x270 [ 243.686493] [c000000016657de0] [c00000001002ec60] syscall_exit_prepare+0x70/0x180 [ 243.686505] [c000000016657e10] [c00000001000bf7c] system_call_vectored_common+0xfc/0x280 [ 243.686520] --- interrupt: 3000 at 0x7fffa47d5ba4 [ 243.686528] NIP: 00007fffa47d5ba4 LR: 0000000000000000 CTR: 0000000000000000 [ 243.686538] REGS: c000000016657e80 TRAP: 3000 Not tainted (6.1.0-rc1) [ 243.686548] MSR: 800000000000d033 <SF,EE,PR,ME,IR,DR,RI,LE> CR: 42044440 XER: 00000000 [ 243.686572] IRQMASK: 0 [ 243.686572] GPR00: 0000000000000006 00007ffffa606710 00007fffa48e7200 0000000000000000 [ 243.686572] GPR04: 0000000000000002 000000000000000a 0000000000000000 0000000000000001 [ 243.686572] GPR08: 000001000c172dd0 0000000000000000 0000000000000000 0000000000000000 [ 243.686572] GPR12: 0000000000000000 00007fffa4ff4bc0 0000000000000000 0000000000000000 [ 243.686572] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 243.686572] GPR20: 0000000132dfdc50 000000000000000e 0000000000189375 0000000000000000 [ 243.686572] GPR24: 00007ffffa606ae0 0000000000000005 000001000c185490 000001000c172570 [ 243.686572] GPR28: 000001000c172990 000001000c184850 000001000c172e00 00007fffa4fedd98 [ 243.686683] NIP [00007fffa47d5ba4] 0x7fffa47d5ba4 [ 243.686691] LR [0000000000000000] 0x0 [ 243.686698] --- interrupt: 3000 [ 243.686708] INFO: task kworker/u16:1:24 blocked for more than 122 seconds. [ 243.686717] Not tainted 6.1.0-rc1 #1 [ 243.686724] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 243.686733] task:kworker/u16:1 state:D stack:0 pid:24 ppid:2 flags:0x00000800 [ 243.686747] Workqueue: events_unbound fsnotify_mark_destroy_workfn [ 243.686758] Call Trace: [ 243.686762] [c0000000166736e0] [c00000004fd91000] 0xc00000004fd91000 (unreliable) [ 243.686775] [c0000000166738d0] [c00000001001dec0] __switch_to+0x130/0x220 [ 243.686788] [c000000016673930] [c000000010f607b8] __schedule+0x1f8/0x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: do not check WED status for non-mmio devices WED is supported just for mmio devices, so do not check it for usb or sdio devices. This patch fixes the crash reported below: [ 21.946627] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d [ 22.525298] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3) [ 22.548274] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d [ 22.557694] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3) [ 22.565885] wlp0s3u1i3: authenticated [ 22.569502] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 1/3) [ 22.578966] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=30 aid=3) [ 22.579113] wlp0s3u1i3: c4:41:1e:f5:2b:1d rejected association temporarily; comeback duration 1000 TU (1024 ms) [ 23.649518] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 2/3) [ 23.752528] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=0 aid=3) [ 23.797450] wlp0s3u1i3: associated [ 24.959527] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 24.959640] BUG: unable to handle page fault for address: ffff88800c223200 [ 24.959706] #PF: supervisor instruction fetch in kernel mode [ 24.959788] #PF: error_code(0x0011) - permissions violation [ 24.959846] PGD 2c01067 P4D 2c01067 PUD 2c02067 PMD c2a8063 PTE 800000000c223163 [ 24.959957] Oops: 0011 [#1] PREEMPT SMP [ 24.960009] CPU: 0 PID: 391 Comm: wpa_supplicant Not tainted 6.2.0-kvm #18 [ 24.960089] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 [ 24.960191] RIP: 0010:0xffff88800c223200 [ 24.960446] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282 [ 24.960513] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058 [ 24.960598] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010 [ 24.960682] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c [ 24.960766] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001 [ 24.960853] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644 [ 24.960950] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 [ 24.961036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.961106] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0 [ 24.961190] Call Trace: [ 24.961219] <TASK> [ 24.961245] ? mt76_connac_mcu_add_key+0x2cf/0x310 [ 24.961313] ? mt7921_set_key+0x150/0x200 [ 24.961365] ? drv_set_key+0xa9/0x1b0 [ 24.961418] ? ieee80211_key_enable_hw_accel+0xd9/0x240 [ 24.961485] ? ieee80211_key_replace+0x3f3/0x730 [ 24.961541] ? crypto_shash_setkey+0x89/0xd0 [ 24.961597] ? ieee80211_key_link+0x2d7/0x3a0 [ 24.961664] ? crypto_aead_setauthsize+0x31/0x50 [ 24.961730] ? sta_info_hash_lookup+0xa6/0xf0 [ 24.961785] ? ieee80211_add_key+0x1fc/0x250 [ 24.961842] ? rdev_add_key+0x41/0x140 [ 24.961882] ? nl80211_parse_key+0x6c/0x2f0 [ 24.961940] ? nl80211_new_key+0x24a/0x290 [ 24.961984] ? genl_rcv_msg+0x36c/0x3a0 [ 24.962036] ? rdev_mod_link_station+0xe0/0xe0 [ 24.962102] ? nl80211_set_key+0x410/0x410 [ 24.962143] ? nl80211_pre_doit+0x200/0x200 [ 24.962187] ? genl_bind+0xc0/0xc0 [ 24.962217] ? netlink_rcv_skb+0xaa/0xd0 [ 24.962259] ? genl_rcv+0x24/0x40 [ 24.962300] ? netlink_unicast+0x224/0x2f0 [ 24.962345] ? netlink_sendmsg+0x30b/0x3d0 [ 24.962388] ? ____sys_sendmsg+0x109/0x1b0 [ 24.962388] ? ____sys_sendmsg+0x109/0x1b0 [ 24.962440] ? __import_iovec+0x2e/0x110 [ 24.962482] ? ___sys_sendmsg+0xbe/0xe0 [ 24.962525] ? mod_objcg_state+0x25c/0x330 [ 24.962576] ? __dentry_kill+0x19e/0x1d0 [ 24.962618] ? call_rcu+0x18f/0x270 [ 24.962660] ? __dentry_kill+0x19e/0x1d0 [ 24.962702] ? __x64_sys_sendmsg+0x70/0x90 [ 24.962744] ? do_syscall_64+0x3d/0x80 [ 24.962796] ? exit_to_user_mode_prepare+0x1b/0x70 [ 24.962852] ? entry_SYSCA ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/smc: Reset connection when trying to use SMCRv2 fails. We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It can be reproduced by: - smc_run nginx - smc_run wrk -t 32 -c 500 -d 30 http://<ip>:<port> BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000108713067 P4D 8000000108713067 PUD 151127067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G W E 6.4.0-rc1+ #42 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc] RSP: 0018:ffffb8294b2d7c78 EFLAGS: 00010a06 RAX: ffff8f1873238880 RBX: ffffb8294b2d7dc8 RCX: 0000000000000000 RDX: 00000000000000b4 RSI: 0000000000000001 RDI: 0000000000b40c00 RBP: ffffb8294b2d7db8 R08: ffff8f1815c5860c R09: 0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12: ffff8f1846f56180 R13: ffff8f1815c5860c R14: 0000000000000001 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8f1aefd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 00000001027a0001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib] ? smcr_buf_map_link+0x24b/0x290 [smc] ? __smc_buf_create+0x4ee/0x9b0 [smc] smc_clc_send_accept+0x4c/0xb0 [smc] smc_listen_work+0x346/0x650 [smc] ? __schedule+0x279/0x820 process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> During the CLC handshake, server sequentially tries available SMCRv2 and SMCRv1 devices in smc_listen_work(). If an SMCRv2 device is found. SMCv2 based link group and link will be assigned to the connection. Then assumed that some buffer assignment errors happen later in the CLC handshake, such as RMB registration failure, server will give up SMCRv2 and try SMCRv1 device instead. But the resources assigned to the connection won't be reset. When server tries SMCRv1 device, the connection creation process will be executed again. Since conn->lnk has been assigned when trying SMCRv2, it will not be set to the correct SMCRv1 link in smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to correct SMCRv1 link group but conn->lnk points to the SMCRv2 link mistakenly. Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx] will be accessed. Since the link->link_idx is not correct, the related MR may not have been initialized, so crash happens. | Try SMCRv2 device first | |-> conn->lgr: assign existed SMCRv2 link group; | |-> conn->link: assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC); | |-> sndbuf & RMB creation fails, quit; | | Try SMCRv1 device then | |-> conn->lgr: create SMCRv1 link group and assign; | |-> conn->link: keep SMCRv2 link mistakenly; | |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0] | initialized. | | Then smc_clc_send_confirm_accept() accesses | conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash. v This patch tries to fix this by cleaning conn->lnk before assigning link. In addition, it is better to reset the connection and clean the resources assigned if trying SMCRv2 failed in buffer creation or registration.

In the Linux kernel, the following vulnerability has been resolved: ovl: fix tmpfile leak Missed an error cleanup.

In the Linux kernel, the following vulnerability has been resolved: qed/qed_sriov: guard against NULL derefs from qed_iov_get_vf_info We have to make sure that the info returned by the helper is valid before using it. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup() fc_lport_ptp_setup() did not check the return value of fc_rport_create() which can return NULL and would cause a NULL pointer dereference. Address this issue by checking return value of fc_rport_create() and log error message on fc_rport_create() failed.

In the Linux kernel, the following vulnerability has been resolved: ice: Do not use WQ_MEM_RECLAIM flag for workqueue When both ice and the irdma driver are loaded, a warning in check_flush_dependency is being triggered. This is due to ice driver workqueue being allocated with the WQ_MEM_RECLAIM flag and the irdma one is not. According to kernel documentation, this flag should be set if the workqueue will be involved in the kernel's memory reclamation flow. Since it is not, there is no need for the ice driver's WQ to have this flag set so remove it. Example trace: [ +0.000004] workqueue: WQ_MEM_RECLAIM ice:ice_service_task [ice] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000139] WARNING: CPU: 0 PID: 728 at kernel/workqueue.c:2632 check_flush_dependency+0x178/0x1a0 [ +0.000011] Modules linked in: bonding tls xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_cha in_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill vfat fat intel_rapl_msr intel _rapl_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct1 0dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_ core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_cm iw_cm iTCO_wdt iTCO_vendor_support ipmi_ssif irdma mei_me ib_uverbs ib_core intel_uncore joydev pcspkr i2c_i801 acpi_ipmi mei lpc_ich i2c_smbus intel_pch_thermal ioatdma ipmi_si acpi_power_meter acpi_pad xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ahci ixgbe libahci ice i40e igb crc32c_intel mdio i2c_algo_bit liba ta dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ +0.000161] [last unloaded: bonding] [ +0.000006] CPU: 0 PID: 728 Comm: kworker/0:2 Tainted: G S 6.2.0-rc2_next-queue-13jan-00458-gc20aabd57164 #1 [ +0.000006] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ +0.000003] Workqueue: ice ice_service_task [ice] [ +0.000127] RIP: 0010:check_flush_dependency+0x178/0x1a0 [ +0.000005] Code: 89 8e 02 01 e8 49 3d 40 00 49 8b 55 18 48 8d 8d d0 00 00 00 48 8d b3 d0 00 00 00 4d 89 e0 48 c7 c7 e0 3b 08 9f e8 bb d3 07 01 <0f> 0b e9 be fe ff ff 80 3d 24 89 8e 02 00 0f 85 6b ff ff ff e9 06 [ +0.000004] RSP: 0018:ffff88810a39f990 EFLAGS: 00010282 [ +0.000005] RAX: 0000000000000000 RBX: ffff888141bc2400 RCX: 0000000000000000 [ +0.000004] RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffa1213a80 [ +0.000003] RBP: ffff888194bf3400 R08: ffffed117b306112 R09: ffffed117b306112 [ +0.000003] R10: ffff888bd983088b R11: ffffed117b306111 R12: 0000000000000000 [ +0.000003] R13: ffff888111f84d00 R14: ffff88810a3943ac R15: ffff888194bf3400 [ +0.000004] FS: 0000000000000000(0000) GS:ffff888bd9800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000056035b208b60 CR3: 000000017795e005 CR4: 00000000007706f0 [ +0.000003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000003] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000002] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000002] <TASK> [ +0.000003] __flush_workqueue+0x203/0x840 [ +0.000006] ? mutex_unlock+0x84/0xd0 [ +0.000008] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? __pfx___flush_workqueue+0x10/0x10 [ +0.000006] ? mutex_lock+0xa3/0xf0 [ +0.000005] ib_cache_cleanup_one+0x39/0x190 [ib_core] [ +0.000174] __ib_unregister_device+0x84/0xf0 [ib_core] [ +0.000094] ib_unregister_device+0x25/0x30 [ib_core] [ +0.000093] irdma_ib_unregister_device+0x97/0xc0 [irdma] [ +0.000064] ? __pfx_irdma_ib_unregister_device+0x10/0x10 [irdma] [ +0.000059] ? up_write+0x5c/0x90 [ +0.000005] irdma_remove+0x36/0x90 [irdma] [ +0.000062] auxiliary_bus_remove+0x32/0x50 [ +0.000007] device_r ---truncated---