In the Linux kernel, the following vulnerability has been resolved: block: refine the EOF check in blkdev_iomap_begin blkdev_iomap_begin rounds down the offset to the logical block size before stashing it in iomap->offset and checking that it still is inside the inode size. Check the i_size check to the raw pos value so that we don't try a zero size write if iter->pos is unaligned.

In the Linux kernel, the following vulnerability has been resolved: net: 9p: fix refcount leak in p9_read_work() error handling p9_req_put need to be called when m->rreq->rc.sdata is NULL to avoid temporary refcount leak. [Dominique: commit wording adjustments, p9_req_put argument fixes for rebase]

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel bug due to missing clearing of buffer delay flag Syzbot reported that after nilfs2 reads a corrupted file system image and degrades to read-only, the BUG_ON check for the buffer delay flag in submit_bh_wbc() may fail, causing a kernel bug. This is because the buffer delay flag is not cleared when clearing the buffer state flags to discard a page/folio or a buffer head. So, fix this. This became necessary when the use of nilfs2's own page clear routine was expanded. This state inconsistency does not occur if the buffer is written normally by log writing.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Off by one in dm_dmub_outbox1_low_irq() The > ARRAY_SIZE() should be >= ARRAY_SIZE() to prevent an out of bounds access.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init If the function sdma_load_context() fails, the sdma_desc will be freed, but the allocated desc->bd is forgot to be freed. We already met the sdma_load_context() failure case and the log as below: [ 450.699064] imx-sdma 30bd0000.dma-controller: Timeout waiting for CH0 ready ... In this case, the desc->bd will not be freed without this change.

In the Linux kernel, the following vulnerability has been resolved: afs: Fix dynamic root getattr The recent patch to make afs_getattr consult the server didn't account for the pseudo-inodes employed by the dynamic root-type afs superblock not having a volume or a server to access, and thus an oops occurs if such a directory is stat'd. Fix this by checking to see if the vnode->volume pointer actually points anywhere before following it in afs_getattr(). This can be tested by stat'ing a directory in /afs. It may be sufficient just to do "ls /afs" and the oops looks something like: BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:afs_getattr+0x8b/0x14b ... Call Trace: <TASK> vfs_statx+0x79/0xf5 vfs_fstatat+0x49/0x62

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_tproxy: restrict to prerouting hook TPROXY is only allowed from prerouting, but nft_tproxy doesn't check this. This fixes a crash (null dereference) when using tproxy from e.g. output.

In the Linux kernel, the following vulnerability has been resolved: drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm_gem_object_lookup will call drm_gem_object_get inside. So cursor_bo needs to be put when msm_gem_get_and_pin_iova fails.

In the Linux kernel, the following vulnerability has been resolved: hugetlbfs: don't delete error page from pagecache This change is very similar to the change that was made for shmem [1], and it solves the same problem but for HugeTLBFS instead. Currently, when poison is found in a HugeTLB page, the page is removed from the page cache. That means that attempting to map or read that hugepage in the future will result in a new hugepage being allocated instead of notifying the user that the page was poisoned. As [1] states, this is effectively memory corruption. The fix is to leave the page in the page cache. If the user attempts to use a poisoned HugeTLB page with a syscall, the syscall will fail with EIO, the same error code that shmem uses. For attempts to map the page, the thread will get a BUS_MCEERR_AR SIGBUS. [1]: commit a76054266661 ("mm: shmem: don't truncate page if memory failure happens")

In the Linux kernel, the following vulnerability has been resolved: net: atlantic: remove aq_nic_deinit() when resume aq_nic_deinit() has been called while suspending, so we don't have to call it again on resume. Actually, call it again leads to another hang issue when resuming from S3. Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992345] Call Trace: Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992346] <TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992348] aq_nic_deinit+0xb4/0xd0 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992356] aq_pm_thaw+0x7f/0x100 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992362] pci_pm_resume+0x5c/0x90 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992366] ? pci_pm_thaw+0x80/0x80 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992368] dpm_run_callback+0x4e/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992371] device_resume+0xad/0x200 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992373] async_resume+0x1e/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992374] async_run_entry_fn+0x33/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992377] process_one_work+0x220/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992380] worker_thread+0x4d/0x3f0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992382] ? process_one_work+0x3c0/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992384] kthread+0x12a/0x150 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992386] ? set_kthread_struct+0x40/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992387] ret_from_fork+0x22/0x30 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992391] </TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992392] ---[ end trace 1ec8c79604ed5e0d ]--- Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992394] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992397] atlantic 0000:02:00.0: PM: failed to resume async: error -110

In the Linux kernel, the following vulnerability has been resolved: mISDN: fix misuse of put_device() in mISDN_register_device() We should not release reference by put_device() before calling device_initialize().

In the Linux kernel, the following vulnerability has been resolved: loop: implement ->free_disk Ensure that the lo_device which is stored in the gendisk private data is valid until the gendisk is freed. Currently the loop driver uses a lot of effort to make sure a device is not freed when it is still in use, but to to fix a potential deadlock this will be relaxed a bit soon.

In the Linux kernel, the following vulnerability has been resolved: RDMA/cm: Fix memory leak in ib_cm_insert_listen cm_alloc_id_priv() allocates resource for the cm_id_priv. When cm_init_listen() fails it doesn't free it, leading to memory leak. Add the missing error unwind.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to clear dirty inode in f2fs_evict_inode() As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215904 The kernel message is shown below: kernel BUG at fs/f2fs/inode.c:825! Call Trace: evict+0x282/0x4e0 __dentry_kill+0x2b2/0x4d0 shrink_dentry_list+0x17c/0x4f0 shrink_dcache_parent+0x143/0x1e0 do_one_tree+0x9/0x30 shrink_dcache_for_umount+0x51/0x120 generic_shutdown_super+0x5c/0x3a0 kill_block_super+0x90/0xd0 kill_f2fs_super+0x225/0x310 deactivate_locked_super+0x78/0xc0 cleanup_mnt+0x2b7/0x480 task_work_run+0xc8/0x150 exit_to_user_mode_prepare+0x14a/0x150 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0x90 The root cause is: inode node and dnode node share the same nid, so during f2fs_evict_inode(), dnode node truncation will invalidate its NAT entry, so when truncating inode node, it fails due to invalid NAT entry, result in inode is still marked as dirty, fix this issue by clearing dirty for inode and setting SBI_NEED_FSCK flag in filesystem. output from dump.f2fs: [print_node_info: 354] Node ID [0xf:15] is inode i_nid[0] [0x f : 15]

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: fix potential memory leak in setup_base_ctxt() setup_base_ctxt() allocates a memory chunk for uctxt->groups with hfi1_alloc_ctxt_rcv_groups(). When init_user_ctxt() fails, uctxt->groups is not released, which will lead to a memory leak. We should release the uctxt->groups with hfi1_free_ctxt_rcv_groups() when init_user_ctxt() fails.

In the Linux kernel, the following vulnerability has been resolved: mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe() It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.

In the Linux kernel, the following vulnerability has been resolved: ASoc: audio-graph-card2: Fix refcount leak bug in __graph_get_type() We should call of_node_put() for the reference before its replacement as it returned by of_get_parent() which has increased the refcount. Besides, we should also call of_node_put() before return.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Protect memory leak for NPIV ports sending PLOGI_RJT There is a potential memory leak in lpfc_ignore_els_cmpl() and lpfc_els_rsp_reject() that was allocated from NPIV PLOGI_RJT (lpfc_rcv_plogi()'s login_mbox). Check if cmdiocb->context_un.mbox was allocated in lpfc_ignore_els_cmpl(), and then free it back to phba->mbox_mem_pool along with mbox->ctx_buf for service parameters. For lpfc_els_rsp_reject() failure, free both the ctx_buf for service parameters and the login_mbox.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8173-rt5650: Fix refcount leak in mt8173_rt5650_dev_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Fix refcount leak in some error paths.

In the Linux kernel, the following vulnerability has been resolved: x86/kprobes: Update kcb status flag after singlestepping Fix kprobes to update kcb (kprobes control block) status flag to KPROBE_HIT_SSDONE even if the kp->post_handler is not set. This bug may cause a kernel panic if another INT3 user runs right after kprobes because kprobe_int3_handler() misunderstands the INT3 is kprobe's single stepping INT3.

In the Linux kernel, the following vulnerability has been resolved: rpmsg: qcom_smd: Fix refcount leak in qcom_smd_parse_edge of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when done.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to obtain the wwan power state configuration from BIOS but is not freeing the acpi_object. The acpi_evaluate_dsm() returned acpi_object to be freed. Free the acpi_object after use.

In the Linux kernel, the following vulnerability has been resolved: mtd: parsers: ofpart: Fix refcount leak in bcm4908_partitions_fw_offset of_find_node_by_path() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: ksm: use range-walk function to jump over holes in scan_get_next_rmap_item Currently, scan_get_next_rmap_item() walks every page address in a VMA to locate mergeable pages. This becomes highly inefficient when scanning large virtual memory areas that contain mostly unmapped regions, causing ksmd to use large amount of cpu without deduplicating much pages. This patch replaces the per-address lookup with a range walk using walk_page_range(). The range walker allows KSM to skip over entire unmapped holes in a VMA, avoiding unnecessary lookups. This problem was previously discussed in [1]. Consider the following test program which creates a 32 TiB mapping in the virtual address space but only populates a single page: #include <unistd.h> #include <stdio.h> #include <sys/mman.h> /* 32 TiB */ const size_t size = 32ul * 1024 * 1024 * 1024 * 1024; int main() { char *area = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_NORESERVE | MAP_PRIVATE | MAP_ANON, -1, 0); if (area == MAP_FAILED) { perror("mmap() failed\n"); return -1; } /* Populate a single page such that we get an anon_vma. */ *area = 0; /* Enable KSM. */ madvise(area, size, MADV_MERGEABLE); pause(); return 0; } $ ./ksm-sparse & $ echo 1 > /sys/kernel/mm/ksm/run Without this patch ksmd uses 100% of the cpu for a long time (more then 1 hour in my test machine) scanning all the 32 TiB virtual address space that contain only one mapped page. This makes ksmd essentially deadlocked not able to deduplicate anything of value. With this patch ksmd walks only the one mapped page and skips the rest of the 32 TiB virtual address space, making the scan fast using little cpu.

In the Linux kernel, the following vulnerability has been resolved: powerpc/xive: Fix refcount leak in xive_get_max_prio of_find_node_by_path() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix request_sock leak in sk lookup helpers A customer reported a request_socket leak in a Calico cloud environment. We found that a BPF program was doing a socket lookup with takes a refcnt on the socket and that it was finding the request_socket but returning the parent LISTEN socket via sk_to_full_sk() without decrementing the child request socket 1st, resulting in request_sock slab object leak. This patch retains the existing behaviour of returning full socks to the caller but it also decrements the child request_socket if one is present before doing so to prevent the leak. Thanks to Curtis Taylor for all the help in diagnosing and testing this. And thanks to Antoine Tenart for the reproducer and patch input. v2 of this patch contains, refactor as per Daniel Borkmann's suggestions to validate RCU flags on the listen socket so that it balances with bpf_sk_release() and update comments as per Martin KaFai Lau's suggestion. One small change to Daniels suggestion, put "sk = sk2" under "if (sk2 != sk)" to avoid an extra instruction.

In the Linux kernel, the following vulnerability has been resolved: net/9p: use a dedicated spinlock for trans_fd Shamelessly copying the explanation from Tetsuo Handa's suggested patch[1] (slightly reworded): syzbot is reporting inconsistent lock state in p9_req_put()[2], for p9_tag_remove() from p9_req_put() from IRQ context is using spin_lock_irqsave() on "struct p9_client"->lock but trans_fd (not from IRQ context) is using spin_lock(). Since the locks actually protect different things in client.c and in trans_fd.c, just replace trans_fd.c's lock by a new one specific to the transport (client.c's protect the idr for fid/tag allocations, while trans_fd.c's protects its own req list and request status field that acts as the transport's state machine)

In the Linux kernel, the following vulnerability has been resolved: x86/sgx: Fix deadlock in SGX NUMA node search When the current node doesn't have an EPC section configured by firmware and all other EPC sections are used up, CPU can get stuck inside the while loop that looks for an available EPC page from remote nodes indefinitely, leading to a soft lockup. Note how nid_of_current will never be equal to nid in that while loop because nid_of_current is not set in sgx_numa_mask. Also worth mentioning is that it's perfectly fine for the firmware not to setup an EPC section on a node. While setting up an EPC section on each node can enhance performance, it is not a requirement for functionality. Rework the loop to start and end on *a* node that has SGX memory. This avoids the deadlock looking for the current SGX-lacking node to show up in the loop when it never will.

In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: fix deadlock and link starvation in outgoing data path The current implementation queues up new control and user packets as needed and processes this queue down to the ldisc in the same code path. That means that the upper and the lower layer are hard coupled in the code. Due to this deadlocks can happen as seen below while transmitting data, especially during ldisc congestion. Furthermore, the data channels starve the control channel on high transmission load on the ldisc. Introduce an additional control channel data queue to prevent timeouts and link hangups during ldisc congestion. This is being processed before the user channel data queue in gsm_data_kick(), i.e. with the highest priority. Put the queue to ldisc data path into a workqueue and trigger it whenever new data has been put into the transmission queue. Change gsm_dlci_data_sweep() accordingly to fill up the transmission queue until TX_THRESH_HI. This solves the locking issue, keeps latency low and provides good performance on high data load. Note that now all packets from a DLCI are removed from the internal queue if the associated DLCI was closed. This ensures that no data is sent by the introduced write task to an already closed DLCI. BUG: spinlock recursion on CPU#0, test_v24_loop/124 lock: serial8250_ports+0x3a8/0x7500, .magic: dead4ead, .owner: test_v24_loop/124, .owner_cpu: 0 CPU: 0 PID: 124 Comm: test_v24_loop Tainted: G O 5.18.0-rc2 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x34/0x44 do_raw_spin_lock+0x76/0xa0 _raw_spin_lock_irqsave+0x72/0x80 uart_write_room+0x3b/0xc0 gsm_data_kick+0x14b/0x240 [n_gsm] gsmld_write_wakeup+0x35/0x70 [n_gsm] tty_wakeup+0x53/0x60 tty_port_default_wakeup+0x1b/0x30 serial8250_tx_chars+0x12f/0x220 serial8250_handle_irq.part.0+0xfe/0x150 serial8250_default_handle_irq+0x48/0x80 serial8250_interrupt+0x56/0xa0 __handle_irq_event_percpu+0x78/0x1f0 handle_irq_event+0x34/0x70 handle_fasteoi_irq+0x90/0x1e0 __common_interrupt+0x69/0x100 common_interrupt+0x48/0xc0 asm_common_interrupt+0x1e/0x40 RIP: 0010:__do_softirq+0x83/0x34e Code: 2a 0a ff 0f b7 ed c7 44 24 10 0a 00 00 00 48 c7 c7 51 2a 64 82 e8 2d e2 d5 ff 65 66 c7 05 83 af 1e 7e 00 00 fb b8 ff ff ff ff <49> c7 c2 40 61 80 82 0f bc c5 41 89 c4 41 83 c4 01 0f 84 e6 00 00 RSP: 0018:ffffc90000003f98 EFLAGS: 00000286 RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff82642a51 RDI: ffffffff825bb5e7 RBP: 0000000000000200 R08: 00000008de3271a8 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000030 R14: 0000000000000000 R15: 0000000000000000 ? __do_softirq+0x73/0x34e irq_exit_rcu+0xb5/0x100 common_interrupt+0xa4/0xc0 </IRQ> <TASK> asm_common_interrupt+0x1e/0x40 RIP: 0010:_raw_spin_unlock_irqrestore+0x2e/0x50 Code: 00 55 48 89 fd 48 83 c7 18 53 48 89 f3 48 8b 74 24 10 e8 85 28 36 ff 48 89 ef e8 cd 58 36 ff 80 e7 02 74 01 fb bf 01 00 00 00 <e8> 3d 97 33 ff 65 8b 05 96 23 2b 7e 85 c0 74 03 5b 5d c3 0f 1f 44 RSP: 0018:ffffc9000020fd08 EFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000000 RDX: 0000000000000004 RSI: ffffffff8257fd74 RDI: 0000000000000001 RBP: ffff8880057de3a0 R08: 00000008de233000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000100 R14: 0000000000000202 R15: ffff8880057df0b8 ? _raw_spin_unlock_irqrestore+0x23/0x50 gsmtty_write+0x65/0x80 [n_gsm] n_tty_write+0x33f/0x530 ? swake_up_all+0xe0/0xe0 file_tty_write.constprop.0+0x1b1/0x320 ? n_tty_flush_buffer+0xb0/0xb0 new_sync_write+0x10c/0x190 vfs_write+0x282/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f3e5e35c15c Code: 8b 7c 24 08 89 c5 e8 c5 ff ff ff 89 ef 89 44 24 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: usb: ohci-nxp: Fix refcount leak in ohci_hcd_nxp_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix possible crash in bnxt_hwrm_set_coal() During the error recovery sequence, the rtnl_lock is not held for the entire duration and some datastructures may be freed during the sequence. Check for the BNXT_STATE_OPEN flag instead of netif_running() to ensure that the device is fully operational before proceeding to reconfigure the coalescing settings. This will fix a possible crash like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 10 PID: 181276 Comm: ethtool Kdump: loaded Tainted: G IOE --------- - - 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/0F9N89, BIOS 2.3.10 08/15/2019 RIP: 0010:bnxt_hwrm_set_coal+0x1fb/0x2a0 [bnxt_en] Code: c2 66 83 4e 22 08 66 89 46 1c e8 10 cb 00 00 41 83 c6 01 44 39 b3 68 01 00 00 0f 8e a3 00 00 00 48 8b 93 c8 00 00 00 49 63 c6 <48> 8b 2c c2 48 8b 85 b8 02 00 00 48 85 c0 74 2e 48 8b 74 24 08 f6 RSP: 0018:ffffb11c8dcaba50 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8d168a8b0ac0 RCX: 00000000000000c5 RDX: 0000000000000000 RSI: ffff8d162f72c000 RDI: ffff8d168a8b0b28 RBP: 0000000000000000 R08: b6e1f68a12e9a7eb R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000037 R12: ffff8d168a8b109c R13: ffff8d168a8b10aa R14: 0000000000000000 R15: ffffffffc01ac4e0 FS: 00007f3852e4c740(0000) GS:ffff8d24c0080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000041b3ee003 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ethnl_set_coalesce+0x3ce/0x4c0 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? coalesce_fill_reply+0x480/0x480 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? syscall_trace_enter+0x1d3/0x2c0 ? __audit_syscall_exit+0x249/0x2a0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f38524163bb

In the Linux kernel, the following vulnerability has been resolved: pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux() pdesc could be null but still dereference pdesc->name and it will lead to a null pointer access. So we move a null check before dereference.

In the Linux kernel, the following vulnerability has been resolved: hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param() Syzkaller reports a null-ptr-deref bug as follows: ====================================================== KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:hugetlbfs_parse_param+0x1dd/0x8e0 fs/hugetlbfs/inode.c:1380 [...] Call Trace: <TASK> vfs_parse_fs_param fs/fs_context.c:148 [inline] vfs_parse_fs_param+0x1f9/0x3c0 fs/fs_context.c:129 vfs_parse_fs_string+0xdb/0x170 fs/fs_context.c:191 generic_parse_monolithic+0x16f/0x1f0 fs/fs_context.c:231 do_new_mount fs/namespace.c:3036 [inline] path_mount+0x12de/0x1e20 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x27f/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] </TASK> ====================================================== According to commit "vfs: parse: deal with zero length string value", kernel will set the param->string to null pointer in vfs_parse_fs_string() if fs string has zero length. Yet the problem is that, hugetlbfs_parse_param() will dereference the param->string, without checking whether it is a null pointer. To be more specific, if hugetlbfs_parse_param() parses an illegal mount parameter, such as "size=,", kernel will constructs struct fs_parameter with null pointer in vfs_parse_fs_string(), then passes this struct fs_parameter to hugetlbfs_parse_param(), which triggers the above null-ptr-deref bug. This patch solves it by adding sanity check on param->string in hugetlbfs_parse_param().

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: add missing ->fini_microcode interface for Sienna Cichlid To avoid any potential memory leak.

In the Linux kernel, the following vulnerability has been resolved: perf: Improve missing SIGTRAP checking To catch missing SIGTRAP we employ a WARN in __perf_event_overflow(), which fires if pending_sigtrap was already set: returning to user space without consuming pending_sigtrap, and then having the event fire again would re-enter the kernel and trigger the WARN. This, however, seemed to miss the case where some events not associated with progress in the user space task can fire and the interrupt handler runs before the IRQ work meant to consume pending_sigtrap (and generate the SIGTRAP). syzbot gifted us this stack trace: | WARNING: CPU: 0 PID: 3607 at kernel/events/core.c:9313 __perf_event_overflow | Modules linked in: | CPU: 0 PID: 3607 Comm: syz-executor100 Not tainted 6.1.0-rc2-syzkaller-00073-g88619e77b33d #0 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 | RIP: 0010:__perf_event_overflow+0x498/0x540 kernel/events/core.c:9313 | <...> | Call Trace: | <TASK> | perf_swevent_hrtimer+0x34f/0x3c0 kernel/events/core.c:10729 | __run_hrtimer kernel/time/hrtimer.c:1685 [inline] | __hrtimer_run_queues+0x1c6/0xfb0 kernel/time/hrtimer.c:1749 | hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811 | local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1096 [inline] | __sysvec_apic_timer_interrupt+0x17c/0x640 arch/x86/kernel/apic/apic.c:1113 | sysvec_apic_timer_interrupt+0x40/0xc0 arch/x86/kernel/apic/apic.c:1107 | asm_sysvec_apic_timer_interrupt+0x16/0x20 arch/x86/include/asm/idtentry.h:649 | <...> | </TASK> In this case, syzbot produced a program with event type PERF_TYPE_SOFTWARE and config PERF_COUNT_SW_CPU_CLOCK. The hrtimer manages to fire again before the IRQ work got a chance to run, all while never having returned to user space. Improve the WARN to check for real progress in user space: approximate this by storing a 32-bit hash of the current IP into pending_sigtrap, and if an event fires while pending_sigtrap still matches the previous IP, we assume no progress (false negatives are possible given we could return to user space and trigger again on the same IP).

In the Linux kernel, the following vulnerability has been resolved: fuse: write inode in fuse_release() A race between write(2) and close(2) allows pages to be dirtied after fuse_flush -> write_inode_now(). If these pages are not flushed from fuse_release(), then there might not be a writable open file later. So any remaining dirty pages must be written back before the file is released. This is a partial revert of the blamed commit.

In the Linux kernel, the following vulnerability has been resolved: 9p/trans_fd: always use O_NONBLOCK read/write syzbot is reporting hung task at p9_fd_close() [1], for p9_mux_poll_stop() from p9_conn_destroy() from p9_fd_close() is failing to interrupt already started kernel_read() from p9_fd_read() from p9_read_work() and/or kernel_write() from p9_fd_write() from p9_write_work() requests. Since p9_socket_open() sets O_NONBLOCK flag, p9_mux_poll_stop() does not need to interrupt kernel_read()/kernel_write(). However, since p9_fd_open() does not set O_NONBLOCK flag, but pipe blocks unless signal is pending, p9_mux_poll_stop() needs to interrupt kernel_read()/kernel_write() when the file descriptor refers to a pipe. In other words, pipe file descriptor needs to be handled as if socket file descriptor. We somehow need to interrupt kernel_read()/kernel_write() on pipes. A minimal change, which this patch is doing, is to set O_NONBLOCK flag from p9_fd_open(), for O_NONBLOCK flag does not affect reading/writing of regular files. But this approach changes O_NONBLOCK flag on userspace- supplied file descriptors (which might break userspace programs), and O_NONBLOCK flag could be changed by userspace. It would be possible to set O_NONBLOCK flag every time p9_fd_read()/p9_fd_write() is invoked, but still remains small race window for clearing O_NONBLOCK flag. If we don't want to manipulate O_NONBLOCK flag, we might be able to surround kernel_read()/kernel_write() with set_thread_flag(TIF_SIGPENDING) and recalc_sigpending(). Since p9_read_work()/p9_write_work() works are processed by kernel threads which process global system_wq workqueue, signals could not be delivered from remote threads when p9_mux_poll_stop() from p9_conn_destroy() from p9_fd_close() is called. Therefore, calling set_thread_flag(TIF_SIGPENDING)/recalc_sigpending() every time would be needed if we count on signals for making kernel_read()/kernel_write() non-blocking. [Dominique: add comment at Christian's suggestion]

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix combination of jit blinding and pointers to bpf subprogs. The combination of jit blinding and pointers to bpf subprogs causes: [ 36.989548] BUG: unable to handle page fault for address: 0000000100000001 [ 36.990342] #PF: supervisor instruction fetch in kernel mode [ 36.990968] #PF: error_code(0x0010) - not-present page [ 36.994859] RIP: 0010:0x100000001 [ 36.995209] Code: Unable to access opcode bytes at RIP 0xffffffd7. [ 37.004091] Call Trace: [ 37.004351] <TASK> [ 37.004576] ? bpf_loop+0x4d/0x70 [ 37.004932] ? bpf_prog_3899083f75e4c5de_F+0xe3/0x13b The jit blinding logic didn't recognize that ld_imm64 with an address of bpf subprogram is a special instruction and proceeded to randomize it. By itself it wouldn't have been an issue, but jit_subprogs() logic relies on two step process to JIT all subprogs and then JIT them again when addresses of all subprogs are known. Blinding process in the first JIT phase caused second JIT to miss adjustment of special ld_imm64. Fix this issue by ignoring special ld_imm64 instructions that don't have user controlled constants and shouldn't be blinded.

In the Linux kernel, the following vulnerability has been resolved: tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd() test_gen_kprobe_cmd() only free buf in fail path, hence buf will leak when there is no failure. Move kfree(buf) from fail path to common path to prevent the memleak. The same reason and solution in test_gen_kretprobe_cmd(). unreferenced object 0xffff888143b14000 (size 2048): comm "insmod", pid 52490, jiffies 4301890980 (age 40.553s) hex dump (first 32 bytes): 70 3a 6b 70 72 6f 62 65 73 2f 67 65 6e 5f 6b 70 p:kprobes/gen_kp 72 6f 62 65 5f 74 65 73 74 20 64 6f 5f 73 79 73 robe_test do_sys backtrace: [<000000006d7b836b>] kmalloc_trace+0x27/0xa0 [<0000000009528b5b>] 0xffffffffa059006f [<000000008408b580>] do_one_initcall+0x87/0x2a0 [<00000000c4980a7e>] do_init_module+0xdf/0x320 [<00000000d775aad0>] load_module+0x3006/0x3390 [<00000000e9a74b80>] __do_sys_finit_module+0x113/0x1b0 [<000000003726480d>] do_syscall_64+0x35/0x80 [<000000003441e93b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: mm/uffd: fix pte marker when fork() without fork event Patch series "mm: Fixes on pte markers". Patch 1 resolves the syzkiller report from Pengfei. Patch 2 further harden pte markers when used with the recent swapin error markers. The major case is we should persist a swapin error marker after fork(), so child shouldn't read a corrupted page. This patch (of 2): When fork(), dst_vma is not guaranteed to have VM_UFFD_WP even if src may have it and has pte marker installed. The warning is improper along with the comment. The right thing is to inherit the pte marker when needed, or keep the dst pte empty. A vague guess is this happened by an accident when there's the prior patch to introduce src/dst vma into this helper during the uffd-wp feature got developed and I probably messed up in the rebase, since if we replace dst_vma with src_vma the warning & comment it all makes sense too. Hugetlb did exactly the right here (copy_hugetlb_page_range()). Fix the general path. Reproducer: https://github.com/xupengfe/syzkaller_logs/blob/main/221208_115556_copy_page_range/repro.c Bugzilla report: https://bugzilla.kernel.org/show_bug.cgi?id=216808

In the Linux kernel, the following vulnerability has been resolved: fpga: m10bmc-sec: Fix probe rollback Handle probe error rollbacks properly to avoid leaks.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mt6797-mt6351: Fix refcount leak in mt6797_mt6351_dev_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: media: ov8865: Fix an error handling path in ov8865_probe() The commit in Fixes also introduced some new error handling which should goto the existing error handling path. Otherwise some resources leak.

In the Linux kernel, the following vulnerability has been resolved: ARM: OMAP2+: display: Fix refcount leak bug In omapdss_init_fbdev(), of_find_node_by_name() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.

In the Linux kernel, the following vulnerability has been resolved: net: fix refcount bug in sk_psock_get (2) Syzkaller reports refcount bug as follows: ------------[ cut here ]------------ refcount_t: saturated; leaking memory. WARNING: CPU: 1 PID: 3605 at lib/refcount.c:19 refcount_warn_saturate+0xf4/0x1e0 lib/refcount.c:19 Modules linked in: CPU: 1 PID: 3605 Comm: syz-executor208 Not tainted 5.18.0-syzkaller-03023-g7e062cda7d90 #0 <TASK> __refcount_add_not_zero include/linux/refcount.h:163 [inline] __refcount_inc_not_zero include/linux/refcount.h:227 [inline] refcount_inc_not_zero include/linux/refcount.h:245 [inline] sk_psock_get+0x3bc/0x410 include/linux/skmsg.h:439 tls_data_ready+0x6d/0x1b0 net/tls/tls_sw.c:2091 tcp_data_ready+0x106/0x520 net/ipv4/tcp_input.c:4983 tcp_data_queue+0x25f2/0x4c90 net/ipv4/tcp_input.c:5057 tcp_rcv_state_process+0x1774/0x4e80 net/ipv4/tcp_input.c:6659 tcp_v4_do_rcv+0x339/0x980 net/ipv4/tcp_ipv4.c:1682 sk_backlog_rcv include/net/sock.h:1061 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2849 release_sock+0x54/0x1b0 net/core/sock.c:3404 inet_shutdown+0x1e0/0x430 net/ipv4/af_inet.c:909 __sys_shutdown_sock net/socket.c:2331 [inline] __sys_shutdown_sock net/socket.c:2325 [inline] __sys_shutdown+0xf1/0x1b0 net/socket.c:2343 __do_sys_shutdown net/socket.c:2351 [inline] __se_sys_shutdown net/socket.c:2349 [inline] __x64_sys_shutdown+0x50/0x70 net/socket.c:2349 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> During SMC fallback process in connect syscall, kernel will replaces TCP with SMC. In order to forward wakeup smc socket waitqueue after fallback, kernel will sets clcsk->sk_user_data to origin smc socket in smc_fback_replace_callbacks(). Later, in shutdown syscall, kernel will calls sk_psock_get(), which treats the clcsk->sk_user_data as psock type, triggering the refcnt warning. So, the root cause is that smc and psock, both will use sk_user_data field. So they will mismatch this field easily. This patch solves it by using another bit(defined as SK_USER_DATA_PSOCK) in PTRMASK, to mark whether sk_user_data points to a psock object or not. This patch depends on a PTRMASK introduced in commit f1ff5ce2cd5e ("net, sk_msg: Clear sk_user_data pointer on clone if tagged"). For there will possibly be more flags in the sk_user_data field, this patch also refactor sk_user_data flags code to be more generic to improve its maintainability.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: Fix FSM command timeout issue When driver processes the internal state change command, it use an asynchronous thread to process the command operation. If the main thread detects that the task has timed out, the asynchronous thread will panic when executing the completion notification because the main thread completion object has been released. BUG: unable to handle page fault for address: fffffffffffffff8 PGD 1f283a067 P4D 1f283a067 PUD 1f283c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:complete_all+0x3e/0xa0 [...] Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x69/0xa0 ? asm_exc_page_fault+0x22/0x30 ? complete_all+0x3e/0xa0 fsm_main_thread+0xa3/0x9c0 [mtk_t7xx (HASH:1400 5)] ? __pfx_autoremove_wake_function+0x10/0x10 kthread+0xd8/0x110 ? __pfx_fsm_main_thread+0x10/0x10 [mtk_t7xx (HASH:1400 5)] ? __pfx_kthread+0x10/0x10 ret_from_fork+0x38/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> [...] CR2: fffffffffffffff8 ---[ end trace 0000000000000000 ]--- Use the reference counter to ensure safe release as Sergey suggests: https://lore.kernel.org/all/da90f64c-260a-4329-87bf-1f9ff20a5951@gmail.com/

In the Linux kernel, the following vulnerability has been resolved: EDAC/highbank: Fix memory leak in highbank_mc_probe() When devres_open_group() fails, it returns -ENOMEM without freeing memory allocated by edac_mc_alloc(). Call edac_mc_free() on the error handling path to avoid a memory leak. [ bp: Massage commit message. ]

In the Linux kernel, the following vulnerability has been resolved: ipw2x00: Fix potential NULL dereference in libipw_xmit() crypt and crypt->ops could be null, so we need to checking null before dereference

In the Linux kernel, the following vulnerability has been resolved: media: cx25821: Fix the warning when removing the module When removing the module, we will get the following warning: [ 14.746697] remove_proc_entry: removing non-empty directory 'irq/21', leaking at least 'cx25821[1]' [ 14.747449] WARNING: CPU: 4 PID: 368 at fs/proc/generic.c:717 remove_proc_entry+0x389/0x3f0 [ 14.751611] RIP: 0010:remove_proc_entry+0x389/0x3f0 [ 14.759589] Call Trace: [ 14.759792] <TASK> [ 14.759975] unregister_irq_proc+0x14c/0x170 [ 14.760340] irq_free_descs+0x94/0xe0 [ 14.760640] mp_unmap_irq+0xb6/0x100 [ 14.760937] acpi_unregister_gsi_ioapic+0x27/0x40 [ 14.761334] acpi_pci_irq_disable+0x1d3/0x320 [ 14.761688] pci_disable_device+0x1ad/0x380 [ 14.762027] ? _raw_spin_unlock_irqrestore+0x2d/0x60 [ 14.762442] ? cx25821_shutdown+0x20/0x9f0 [cx25821] [ 14.762848] cx25821_finidev+0x48/0xc0 [cx25821] [ 14.763242] pci_device_remove+0x92/0x240 Fix this by freeing the irq before call pci_disable_device().

In the Linux kernel, the following vulnerability has been resolved: driver core: fix deadlock in __device_attach In __device_attach function, The lock holding logic is as follows: ... __device_attach device_lock(dev) // get lock dev async_schedule_dev(__device_attach_async_helper, dev); // func async_schedule_node async_schedule_node_domain(func) entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC); /* when fail or work limit, sync to execute func, but __device_attach_async_helper will get lock dev as well, which will lead to A-A deadlock. */ if (!entry || atomic_read(&entry_count) > MAX_WORK) { func; else queue_work_node(node, system_unbound_wq, &entry->work) device_unlock(dev) As shown above, when it is allowed to do async probes, because of out of memory or work limit, async work is not allowed, to do sync execute instead. it will lead to A-A deadlock because of __device_attach_async_helper getting lock dev. To fix the deadlock, move the async_schedule_dev outside device_lock, as we can see, in async_schedule_node_domain, the parameter of queue_work_node is system_unbound_wq, so it can accept concurrent operations. which will also not change the code logic, and will not lead to deadlock.