In the Linux kernel, the following vulnerability has been resolved: ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work() There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex is left locked forever. That may lead to deadlock when rt5645_jack_detect_work() is called for the second time. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: Do a runtime PM get on controllers during probe mt8183-mfgcfg has a mutual dependency with genpd during the probing stage, which leads to a deadlock in the following call stack: CPU0: genpd_lock --> clk_prepare_lock genpd_power_off_work_fn() genpd_lock() generic_pm_domain::power_off() clk_unprepare() clk_prepare_lock() CPU1: clk_prepare_lock --> genpd_lock clk_register() __clk_core_init() clk_prepare_lock() clk_pm_runtime_get() genpd_lock() Do a runtime PM get at the probe function to make sure clk_register() won't acquire the genpd lock. Instead of only modifying mt8183-mfgcfg, do this on all mediatek clock controller probings because we don't believe this would cause any regression. Verified on MT8183 and MT8192 Chromebooks.

In the Linux kernel, the following vulnerability has been resolved: serial/pmac_zilog: Remove flawed mitigation for rx irq flood The mitigation was intended to stop the irq completely. That may be better than a hard lock-up but it turns out that you get a crash anyway if you're using pmac_zilog as a serial console: ttyPZ0: pmz: rx irq flood ! BUG: spinlock recursion on CPU#0, swapper/0 That's because the pr_err() call in pmz_receive_chars() results in pmz_console_write() attempting to lock a spinlock already locked in pmz_interrupt(). With CONFIG_DEBUG_SPINLOCK=y, this produces a fatal BUG splat. The spinlock in question is the one in struct uart_port. Even when it's not fatal, the serial port rx function ceases to work. Also, the iteration limit doesn't play nicely with QEMU, as can be seen in the bug report linked below. A web search for other reports of the error message "pmz: rx irq flood" didn't produce anything. So I don't think this code is needed any more. Remove it.

In the Linux kernel, the following vulnerability has been resolved: aoe: avoid potential deadlock at set_capacity Move set_capacity() outside of the section procected by (&d->lock). To avoid possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- [1] lock(&bdev->bd_size_lock); local_irq_disable(); [2] lock(&d->lock); [3] lock(&bdev->bd_size_lock); <Interrupt> [4] lock(&d->lock); *** DEADLOCK *** Where [1](&bdev->bd_size_lock) hold by zram_add()->set_capacity(). [2]lock(&d->lock) hold by aoeblk_gdalloc(). And aoeblk_gdalloc() is trying to acquire [3](&bdev->bd_size_lock) at set_capacity() call. In this situation an attempt to acquire [4]lock(&d->lock) from aoecmd_cfg_rsp() will lead to deadlock. So the simplest solution is breaking lock dependency [2](&d->lock) -> [3](&bdev->bd_size_lock) by moving set_capacity() outside.

In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix mirred deadlock on device recursion When the mirred action is used on a classful egress qdisc and a packet is mirrored or redirected to self we hit a qdisc lock deadlock. See trace below. [..... other info removed for brevity....] [ 82.890906] [ 82.890906] ============================================ [ 82.890906] WARNING: possible recursive locking detected [ 82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G W [ 82.890906] -------------------------------------------- [ 82.890906] ping/418 is trying to acquire lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] but task is already holding lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] other info that might help us debug this: [ 82.890906] Possible unsafe locking scenario: [ 82.890906] [ 82.890906] CPU0 [ 82.890906] ---- [ 82.890906] lock(&sch->q.lock); [ 82.890906] lock(&sch->q.lock); [ 82.890906] [ 82.890906] *** DEADLOCK *** [ 82.890906] [..... other info removed for brevity....] Example setup (eth0->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 Another example(eth0->eth1->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth1 tc qdisc add dev eth1 root handle 1: htb default 30 tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 We fix this by adding an owner field (CPU id) to struct Qdisc set after root qdisc is entered. When the softirq enters it a second time, if the qdisc owner is the same CPU, the packet is dropped to break the loop.

In the Linux kernel, the following vulnerability has been resolved: cfg80211: fix management registrations locking The management registrations locking was broken, the list was locked for each wdev, but cfg80211_mgmt_registrations_update() iterated it without holding all the correct spinlocks, causing list corruption. Rather than trying to fix it with fine-grained locking, just move the lock to the wiphy/rdev (still need the list on each wdev), we already need to hold the wdev lock to change it, so there's no contention on the lock in any case. This trivially fixes the bug since we hold one wdev's lock already, and now will hold the lock that protects all lists.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix RELEASE_LOCKOWNER The test on so_count in nfsd4_release_lockowner() is nonsense and harmful. Revert to using check_for_locks(), changing that to not sleep. First: harmful. As is documented in the kdoc comment for nfsd4_release_lockowner(), the test on so_count can transiently return a false positive resulting in a return of NFS4ERR_LOCKS_HELD when in fact no locks are held. This is clearly a protocol violation and with the Linux NFS client it can cause incorrect behaviour. If RELEASE_LOCKOWNER is sent while some other thread is still processing a LOCK request which failed because, at the time that request was received, the given owner held a conflicting lock, then the nfsd thread processing that LOCK request can hold a reference (conflock) to the lock owner that causes nfsd4_release_lockowner() to return an incorrect error. The Linux NFS client ignores that NFS4ERR_LOCKS_HELD error because it never sends NFS4_RELEASE_LOCKOWNER without first releasing any locks, so it knows that the error is impossible. It assumes the lock owner was in fact released so it feels free to use the same lock owner identifier in some later locking request. When it does reuse a lock owner identifier for which a previous RELEASE failed, it will naturally use a lock_seqid of zero. However the server, which didn't release the lock owner, will expect a larger lock_seqid and so will respond with NFS4ERR_BAD_SEQID. So clearly it is harmful to allow a false positive, which testing so_count allows. The test is nonsense because ... well... it doesn't mean anything. so_count is the sum of three different counts. 1/ the set of states listed on so_stateids 2/ the set of active vfs locks owned by any of those states 3/ various transient counts such as for conflicting locks. When it is tested against '2' it is clear that one of these is the transient reference obtained by find_lockowner_str_locked(). It is not clear what the other one is expected to be. In practice, the count is often 2 because there is precisely one state on so_stateids. If there were more, this would fail. In my testing I see two circumstances when RELEASE_LOCKOWNER is called. In one case, CLOSE is called before RELEASE_LOCKOWNER. That results in all the lock states being removed, and so the lockowner being discarded (it is removed when there are no more references which usually happens when the lock state is discarded). When nfsd4_release_lockowner() finds that the lock owner doesn't exist, it returns success. The other case shows an so_count of '2' and precisely one state listed in so_stateid. It appears that the Linux client uses a separate lock owner for each file resulting in one lock state per lock owner, so this test on '2' is safe. For another client it might not be safe. So this patch changes check_for_locks() to use the (newish) find_any_file_locked() so that it doesn't take a reference on the nfs4_file and so never calls nfsd_file_put(), and so never sleeps. With this check is it safe to restore the use of check_for_locks() rather than testing so_count against the mysterious '2'.

In the Linux kernel, the following vulnerability has been resolved: PCI/ASPM: Fix deadlock when enabling ASPM A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice.

In the Linux kernel, the following vulnerability has been resolved: tcp: make sure init the accept_queue's spinlocks once When I run syz's reproduction C program locally, it causes the following issue: pvqspinlock: lock 0xffff9d181cd5c660 has corrupted value 0x0! WARNING: CPU: 19 PID: 21160 at __pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508) Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508) Code: 73 56 3a ff 90 c3 cc cc cc cc 8b 05 bb 1f 48 01 85 c0 74 05 c3 cc cc cc cc 8b 17 48 89 fe 48 c7 c7 30 20 ce 8f e8 ad 56 42 ff <0f> 0b c3 cc cc cc cc 0f 0b 0f 1f 40 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa8d200604cb8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9d1ef60e0908 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9d1ef60e0900 RBP: ffff9d181cd5c280 R08: 0000000000000000 R09: 00000000ffff7fff R10: ffffa8d200604b68 R11: ffffffff907dcdc8 R12: 0000000000000000 R13: ffff9d181cd5c660 R14: ffff9d1813a3f330 R15: 0000000000001000 FS: 00007fa110184640(0000) GS:ffff9d1ef60c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000011f65e000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_unlock (kernel/locking/spinlock.c:186) inet_csk_reqsk_queue_add (net/ipv4/inet_connection_sock.c:1321) inet_csk_complete_hashdance (net/ipv4/inet_connection_sock.c:1358) tcp_check_req (net/ipv4/tcp_minisocks.c:868) tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2260) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205) ip_local_deliver_finish (net/ipv4/ip_input.c:234) __netif_receive_skb_one_core (net/core/dev.c:5529) process_backlog (./include/linux/rcupdate.h:779) __napi_poll (net/core/dev.c:6533) net_rx_action (net/core/dev.c:6604) __do_softirq (./arch/x86/include/asm/jump_label.h:27) do_softirq (kernel/softirq.c:454 kernel/softirq.c:441) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:381) __dev_queue_xmit (net/core/dev.c:4374) ip_finish_output2 (./include/net/neighbour.h:540 net/ipv4/ip_output.c:235) __ip_queue_xmit (net/ipv4/ip_output.c:535) __tcp_transmit_skb (net/ipv4/tcp_output.c:1462) tcp_rcv_synsent_state_process (net/ipv4/tcp_input.c:6469) tcp_rcv_state_process (net/ipv4/tcp_input.c:6657) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1929) __release_sock (./include/net/sock.h:1121 net/core/sock.c:2968) release_sock (net/core/sock.c:3536) inet_wait_for_connect (net/ipv4/af_inet.c:609) __inet_stream_connect (net/ipv4/af_inet.c:702) inet_stream_connect (net/ipv4/af_inet.c:748) __sys_connect (./include/linux/file.h:45 net/socket.c:2064) __x64_sys_connect (net/socket.c:2073 net/socket.c:2070 net/socket.c:2070) do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:82) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7fa10ff05a3d Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48 RSP: 002b:00007fa110183de8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020000054 RCX: 00007fa10ff05a3d RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003 RBP: 00007fa110183e20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fa110184640 R13: 0000000000000000 R14: 00007fa10fe8b060 R15: 00007fff73e23b20 </TASK> The issue triggering process is analyzed as follows: Thread A Thread B tcp_v4_rcv //receive ack TCP packet inet_shutdown tcp_check_req tcp_disconnect //disconnect sock ... tcp_set_state(sk, TCP_CLOSE) inet_csk_complete_hashdance ... inet_csk_reqsk_queue_add ---truncated---

In the Linux kernel, the following vulnerability has been resolved: inet: read sk->sk_family once in inet_recv_error() inet_recv_error() is called without holding the socket lock. IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM socket option and trigger a KCSAN warning.

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix locking in ieee80211_start_ap error path We need to hold the local->mtx to release the channel context, as even encoded by the lockdep_assert_held() there. Fix it.

In the Linux kernel, the following vulnerability has been resolved: fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats lock_task_sighand() can trigger a hard lockup. If NR_CPUS threads call do_task_stat() at the same time and the process has NR_THREADS, it will spin with irqs disabled O(NR_CPUS * NR_THREADS) time. Change do_task_stat() to use sig->stats_lock to gather the statistics outside of ->siglock protected section, in the likely case this code will run lockless.

In the Linux kernel, the following vulnerability has been resolved: mm: use memalloc_nofs_save() in page_cache_ra_order() See commit f2c817bed58d ("mm: use memalloc_nofs_save in readahead path"), ensure that page_cache_ra_order() do not attempt to reclaim file-backed pages too, or it leads to a deadlock, found issue when test ext4 large folio. INFO: task DataXceiver for:7494 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:DataXceiver for state:D stack:0 pid:7494 ppid:1 flags:0x00000200 Call trace: __switch_to+0x14c/0x240 __schedule+0x82c/0xdd0 schedule+0x58/0xf0 io_schedule+0x24/0xa0 __folio_lock+0x130/0x300 migrate_pages_batch+0x378/0x918 migrate_pages+0x350/0x700 compact_zone+0x63c/0xb38 compact_zone_order+0xc0/0x118 try_to_compact_pages+0xb0/0x280 __alloc_pages_direct_compact+0x98/0x248 __alloc_pages+0x510/0x1110 alloc_pages+0x9c/0x130 folio_alloc+0x20/0x78 filemap_alloc_folio+0x8c/0x1b0 page_cache_ra_order+0x174/0x308 ondemand_readahead+0x1c8/0x2b8 page_cache_async_ra+0x68/0xb8 filemap_readahead.isra.0+0x64/0xa8 filemap_get_pages+0x3fc/0x5b0 filemap_splice_read+0xf4/0x280 ext4_file_splice_read+0x2c/0x48 [ext4] vfs_splice_read.part.0+0xa8/0x118 splice_direct_to_actor+0xbc/0x288 do_splice_direct+0x9c/0x108 do_sendfile+0x328/0x468 __arm64_sys_sendfile64+0x8c/0x148 invoke_syscall+0x4c/0x118 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x4c/0x1f8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix hang in nilfs_lookup_dirty_data_buffers() Syzbot reported a hang issue in migrate_pages_batch() called by mbind() and nilfs_lookup_dirty_data_buffers() called in the log writer of nilfs2. While migrate_pages_batch() locks a folio and waits for the writeback to complete, the log writer thread that should bring the writeback to completion picks up the folio being written back in nilfs_lookup_dirty_data_buffers() that it calls for subsequent log creation and was trying to lock the folio. Thus causing a deadlock. In the first place, it is unexpected that folios/pages in the middle of writeback will be updated and become dirty. Nilfs2 adds a checksum to verify the validity of the log being written and uses it for recovery at mount, so data changes during writeback are suppressed. Since this is broken, an unclean shutdown could potentially cause recovery to fail. Investigation revealed that the root cause is that the wait for writeback completion in nilfs_page_mkwrite() is conditional, and if the backing device does not require stable writes, data may be modified without waiting. Fix these issues by making nilfs_page_mkwrite() wait for writeback to finish regardless of the stable write requirement of the backing device.

In the Linux kernel, the following vulnerability has been resolved: bcachefs: grab s_umount only if snapshotting When I was testing mongodb over bcachefs with compression, there is a lockdep warning when snapshotting mongodb data volume. $ cat test.sh prog=bcachefs $prog subvolume create /mnt/data $prog subvolume create /mnt/data/snapshots while true;do $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s) sleep 1s done $ cat /etc/mongodb.conf systemLog: destination: file logAppend: true path: /mnt/data/mongod.log storage: dbPath: /mnt/data/ lockdep reports: [ 3437.452330] ====================================================== [ 3437.452750] WARNING: possible circular locking dependency detected [ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G E [ 3437.453562] ------------------------------------------------------ [ 3437.453981] bcachefs/35533 is trying to acquire lock: [ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190 [ 3437.454875] but task is already holding lock: [ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.456009] which lock already depends on the new lock. [ 3437.456553] the existing dependency chain (in reverse order) is: [ 3437.457054] -> #3 (&type->s_umount_key#48){.+.+}-{3:3}: [ 3437.457507] down_read+0x3e/0x170 [ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.458206] __x64_sys_ioctl+0x93/0xd0 [ 3437.458498] do_syscall_64+0x42/0xf0 [ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.459155] -> #2 (&c->snapshot_create_lock){++++}-{3:3}: [ 3437.459615] down_read+0x3e/0x170 [ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs] [ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs] [ 3437.460686] notify_change+0x1f1/0x4a0 [ 3437.461283] do_truncate+0x7f/0xd0 [ 3437.461555] path_openat+0xa57/0xce0 [ 3437.461836] do_filp_open+0xb4/0x160 [ 3437.462116] do_sys_openat2+0x91/0xc0 [ 3437.462402] __x64_sys_openat+0x53/0xa0 [ 3437.462701] do_syscall_64+0x42/0xf0 [ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.463359] -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}: [ 3437.463843] down_write+0x3b/0xc0 [ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs] [ 3437.464493] vfs_write+0x21b/0x4c0 [ 3437.464653] ksys_write+0x69/0xf0 [ 3437.464839] do_syscall_64+0x42/0xf0 [ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.465231] -> #0 (sb_writers#10){.+.+}-{0:0}: [ 3437.465471] __lock_acquire+0x1455/0x21b0 [ 3437.465656] lock_acquire+0xc6/0x2b0 [ 3437.465822] mnt_want_write+0x46/0x1a0 [ 3437.465996] filename_create+0x62/0x190 [ 3437.466175] user_path_create+0x2d/0x50 [ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.466617] __x64_sys_ioctl+0x93/0xd0 [ 3437.466791] do_syscall_64+0x42/0xf0 [ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.467180] other info that might help us debug this: [ 3437.469670] 2 locks held by bcachefs/35533: other info that might help us debug this: [ 3437.467507] Chain exists of: sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48 [ 3437.467979] Possible unsafe locking scenario: [ 3437.468223] CPU0 CPU1 [ 3437.468405] ---- ---- [ 3437.468585] rlock(&type->s_umount_key#48); [ 3437.468758] lock(&c->snapshot_create_lock); [ 3437.469030] lock(&type->s_umount_key#48); [ 3437.469291] rlock(sb_writers#10); [ 3437.469434] *** DEADLOCK *** [ 3437.469 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: block: mark GFP_NOIO around sysfs ->store() sysfs ->store is called with queue freezed, meantime we have several ->store() callbacks(update_nr_requests, wbt, scheduler) to allocate memory with GFP_KERNEL which may run into direct reclaim code path, then potential deadlock can be caused. Fix the issue by marking NOIO around sysfs ->store()

The handle_stop_signal function in signal.c in Linux kernel 2.6.11 up to other versions before 2.6.13 and 2.6.12.6 allows local users to cause a denial of service (deadlock) by sending a SIGKILL to a real-time threaded process while it is performing a core dump.

A vulnerability was found in btrfs_alloc_tree_b in fs/btrfs/extent-tree.c in the Linux kernel due to an improper lock operation in btrfs. In this flaw, a user with a local privilege may cause a denial of service (DOS) due to a deadlock problem.

A denial of service vulnerability due to a deadlock was found in sctp_auto_asconf_init in net/sctp/socket.c in the Linux kernel’s SCTP subsystem. This flaw allows guests with local user privileges to trigger a deadlock and potentially crash the system.

Array index overflow in the xfrm_sk_policy_insert function in xfrm_user.c in Linux kernel 2.6 allows local users to cause a denial of service (oops or deadlock) and possibly execute arbitrary code via a p->dir value that is larger than XFRM_POLICY_OUT, which is used as an index in the sock->sk_policy array.

A denial of service vulnerability was found in tipc_crypto_key_revoke in net/tipc/crypto.c in the Linux kernel’s TIPC subsystem. This flaw allows guests with local user privileges to trigger a deadlock and potentially crash the system.

In the Linux kernel, the following vulnerability has been resolved: gpio: rcar: Use raw_spinlock to protect register access Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] #2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] #4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt The commit 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free") uses the get/put_cpu() to protect the usage of percpu pointer in ->aura_freeptr() callback, but it also unnecessarily disable the preemption for the blockable memory allocation. The commit 87b93b678e95 ("octeontx2-pf: Avoid use of GFP_KERNEL in atomic context") tried to fix these sleep inside atomic warnings. But it only fix the one for the non-rt kernel. For the rt kernel, we still get the similar warnings like below. BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by swapper/0/1: #0: ffff800009fc5fe8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30 #1: ffff000100c276c0 (&mbox->lock){+.+.}-{3:3}, at: otx2_init_hw_resources+0x8c/0x3a4 #2: ffffffbfef6537e0 (&cpu_rcache->lock){+.+.}-{2:2}, at: alloc_iova_fast+0x1ac/0x2ac Preemption disabled at: [<ffff800008b1908c>] otx2_rq_aura_pool_init+0x14c/0x284 CPU: 20 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc3-rt1-yocto-preempt-rt #1 Hardware name: Marvell OcteonTX CN96XX board (DT) Call trace: dump_backtrace.part.0+0xe8/0xf4 show_stack+0x20/0x30 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x224 rt_spin_lock+0x64/0x110 alloc_iova_fast+0x1ac/0x2ac iommu_dma_alloc_iova+0xd4/0x110 __iommu_dma_map+0x80/0x144 iommu_dma_map_page+0xe8/0x260 dma_map_page_attrs+0xb4/0xc0 __otx2_alloc_rbuf+0x90/0x150 otx2_rq_aura_pool_init+0x1c8/0x284 otx2_init_hw_resources+0xe4/0x3a4 otx2_open+0xf0/0x610 __dev_open+0x104/0x224 __dev_change_flags+0x1e4/0x274 dev_change_flags+0x2c/0x7c ic_open_devs+0x124/0x2f8 ip_auto_config+0x180/0x42c do_one_initcall+0x90/0x4dc do_basic_setup+0x10c/0x14c kernel_init_freeable+0x10c/0x13c kernel_init+0x2c/0x140 ret_from_fork+0x10/0x20 Of course, we can shuffle the get/put_cpu() to only wrap the invocation of ->aura_freeptr() as what commit 87b93b678e95 does. But there are only two ->aura_freeptr() callbacks, otx2_aura_freeptr() and cn10k_aura_freeptr(). There is no usage of perpcu variable in the otx2_aura_freeptr() at all, so the get/put_cpu() seems redundant to it. We can move the get/put_cpu() into the corresponding callback which really has the percpu variable usage and avoid the sprinkling of get/put_cpu() in several places.

In the Linux kernel, the following vulnerability has been resolved: NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback Add PF_KCOMPACTD flag and current_is_kcompactd() helper to check for it so nfs_release_folio() can skip calling nfs_wb_folio() from kcompactd. Otherwise NFS can deadlock waiting for kcompactd enduced writeback which recurses back to NFS (which triggers writeback to NFSD via NFS loopback mount on the same host, NFSD blocks waiting for XFS's call to __filemap_get_folio): 6070.550357] INFO: task kcompactd0:58 blocked for more than 4435 seconds. {--- [58] "kcompactd0" [<0>] folio_wait_bit+0xe8/0x200 [<0>] folio_wait_writeback+0x2b/0x80 [<0>] nfs_wb_folio+0x80/0x1b0 [nfs] [<0>] nfs_release_folio+0x68/0x130 [nfs] [<0>] split_huge_page_to_list_to_order+0x362/0x840 [<0>] migrate_pages_batch+0x43d/0xb90 [<0>] migrate_pages_sync+0x9a/0x240 [<0>] migrate_pages+0x93c/0x9f0 [<0>] compact_zone+0x8e2/0x1030 [<0>] compact_node+0xdb/0x120 [<0>] kcompactd+0x121/0x2e0 [<0>] kthread+0xcf/0x100 [<0>] ret_from_fork+0x31/0x40 [<0>] ret_from_fork_asm+0x1a/0x30 ---} [akpm@linux-foundation.org: fix build]

In the Linux kernel, the following vulnerability has been resolved: net: rose: lock the socket in rose_bind() syzbot reported a soft lockup in rose_loopback_timer(), with a repro calling bind() from multiple threads. rose_bind() must lock the socket to avoid this issue.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix soft lockup during bt pages loop Driver runs a for-loop when allocating bt pages and mapping them with buffer pages. When a large buffer (e.g. MR over 100GB) is being allocated, it may require a considerable loop count. This will lead to soft lockup: watchdog: BUG: soft lockup - CPU#27 stuck for 22s! ... Call trace: hem_list_alloc_mid_bt+0x124/0x394 [hns_roce_hw_v2] hns_roce_hem_list_request+0xf8/0x160 [hns_roce_hw_v2] hns_roce_mtr_create+0x2e4/0x360 [hns_roce_hw_v2] alloc_mr_pbl+0xd4/0x17c [hns_roce_hw_v2] hns_roce_reg_user_mr+0xf8/0x190 [hns_roce_hw_v2] ib_uverbs_reg_mr+0x118/0x290 watchdog: BUG: soft lockup - CPU#35 stuck for 23s! ... Call trace: hns_roce_hem_list_find_mtt+0x7c/0xb0 [hns_roce_hw_v2] mtr_map_bufs+0xc4/0x204 [hns_roce_hw_v2] hns_roce_mtr_create+0x31c/0x3c4 [hns_roce_hw_v2] alloc_mr_pbl+0xb0/0x160 [hns_roce_hw_v2] hns_roce_reg_user_mr+0x108/0x1c0 [hns_roce_hw_v2] ib_uverbs_reg_mr+0x120/0x2bc Add a cond_resched() to fix soft lockup during these loops. In order not to affect the allocation performance of normal-size buffer, set the loop count of a 100GB MR as the threshold to call cond_resched().

btrfs in the Linux kernel before 5.13.4 allows attackers to cause a denial of service (deadlock) via processes that trigger allocation of new system chunks during times when there is a shortage of free space in the system space_info.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock when aborting transaction during relocation with scrub Before relocating a block group we pause scrub, then do the relocation and then unpause scrub. The relocation process requires starting and committing a transaction, and if we have a failure in the critical section of the transaction commit path (transaction state >= TRANS_STATE_COMMIT_START), we will deadlock if there is a paused scrub. That results in stack traces like the following: [42.479] BTRFS info (device sdc): relocating block group 53876686848 flags metadata|raid6 [42.936] BTRFS warning (device sdc): Skipping commit of aborted transaction. [42.936] ------------[ cut here ]------------ [42.936] BTRFS: Transaction aborted (error -28) [42.936] WARNING: CPU: 11 PID: 346822 at fs/btrfs/transaction.c:1977 btrfs_commit_transaction+0xcc8/0xeb0 [btrfs] [42.936] Modules linked in: dm_flakey dm_mod loop btrfs (...) [42.936] CPU: 11 PID: 346822 Comm: btrfs Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1 [42.936] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [42.936] RIP: 0010:btrfs_commit_transaction+0xcc8/0xeb0 [btrfs] [42.936] Code: ff ff 45 8b (...) [42.936] RSP: 0018:ffffb58649633b48 EFLAGS: 00010282 [42.936] RAX: 0000000000000000 RBX: ffff8be6ef4d5bd8 RCX: 0000000000000000 [42.936] RDX: 0000000000000002 RSI: ffffffffb35e7782 RDI: 00000000ffffffff [42.936] RBP: ffff8be6ef4d5c98 R08: 0000000000000000 R09: ffffb586496339e8 [42.936] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8be6d38c7c00 [42.936] R13: 00000000ffffffe4 R14: ffff8be6c268c000 R15: ffff8be6ef4d5cf0 [42.936] FS: 00007f381a82b340(0000) GS:ffff8beddfcc0000(0000) knlGS:0000000000000000 [42.936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [42.936] CR2: 00007f1e35fb7638 CR3: 0000000117680006 CR4: 0000000000370ee0 [42.936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [42.936] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [42.936] Call Trace: [42.936] <TASK> [42.936] ? start_transaction+0xcb/0x610 [btrfs] [42.936] prepare_to_relocate+0x111/0x1a0 [btrfs] [42.936] relocate_block_group+0x57/0x5d0 [btrfs] [42.936] ? btrfs_wait_nocow_writers+0x25/0xb0 [btrfs] [42.936] btrfs_relocate_block_group+0x248/0x3c0 [btrfs] [42.936] ? __pfx_autoremove_wake_function+0x10/0x10 [42.936] btrfs_relocate_chunk+0x3b/0x150 [btrfs] [42.936] btrfs_balance+0x8ff/0x11d0 [btrfs] [42.936] ? __kmem_cache_alloc_node+0x14a/0x410 [42.936] btrfs_ioctl+0x2334/0x32c0 [btrfs] [42.937] ? mod_objcg_state+0xd2/0x360 [42.937] ? refill_obj_stock+0xb0/0x160 [42.937] ? seq_release+0x25/0x30 [42.937] ? __rseq_handle_notify_resume+0x3b5/0x4b0 [42.937] ? percpu_counter_add_batch+0x2e/0xa0 [42.937] ? __x64_sys_ioctl+0x88/0xc0 [42.937] __x64_sys_ioctl+0x88/0xc0 [42.937] do_syscall_64+0x38/0x90 [42.937] entry_SYSCALL_64_after_hwframe+0x72/0xdc [42.937] RIP: 0033:0x7f381a6ffe9b [42.937] Code: 00 48 89 44 24 (...) [42.937] RSP: 002b:00007ffd45ecf060 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [42.937] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f381a6ffe9b [42.937] RDX: 00007ffd45ecf150 RSI: 00000000c4009420 RDI: 0000000000000003 [42.937] RBP: 0000000000000003 R08: 0000000000000013 R09: 0000000000000000 [42.937] R10: 00007f381a60c878 R11: 0000000000000246 R12: 00007ffd45ed0423 [42.937] R13: 00007ffd45ecf150 R14: 0000000000000000 R15: 00007ffd45ecf148 [42.937] </TASK> [42.937] ---[ end trace 0000000000000000 ]--- [42.937] BTRFS: error (device sdc: state A) in cleanup_transaction:1977: errno=-28 No space left [59.196] INFO: task btrfs:346772 blocked for more than 120 seconds. [59.196] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1 [59.196] "echo 0 > /proc/sys/kernel/hung_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Rework long task execution when adding/deleting entries When adding/deleting large number of elements in one step in ipset, it can take a reasonable amount of time and can result in soft lockup errors. The patch 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete") tried to fix it by limiting the max elements to process at all. However it was not enough, it is still possible that we get hung tasks. Lowering the limit is not reasonable, so the approach in this patch is as follows: rely on the method used at resizing sets and save the state when we reach a smaller internal batch limit, unlock/lock and proceed from the saved state. Thus we can avoid long continuous tasks and at the same time removed the limit to add/delete large number of elements in one step. The nfnl mutex is held during the whole operation which prevents one to issue other ipset commands in parallel.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix possible deadlock in rfcomm_sk_state_change syzbot reports a possible deadlock in rfcomm_sk_state_change [1]. While rfcomm_sock_connect acquires the sk lock and waits for the rfcomm lock, rfcomm_sock_release could have the rfcomm lock and hit a deadlock for acquiring the sk lock. Here's a simplified flow: rfcomm_sock_connect: lock_sock(sk) rfcomm_dlc_open: rfcomm_lock() rfcomm_sock_release: rfcomm_sock_shutdown: rfcomm_lock() __rfcomm_dlc_close: rfcomm_k_state_change: lock_sock(sk) This patch drops the sk lock before calling rfcomm_dlc_open to avoid the possible deadlock and holds sk's reference count to prevent use-after-free after rfcomm_dlc_open completes.

In the Linux kernel, the following vulnerability has been resolved: sctp: add a refcnt in sctp_stream_priorities to avoid a nested loop With this refcnt added in sctp_stream_priorities, we don't need to traverse all streams to check if the prio is used by other streams when freeing one stream's prio in sctp_sched_prio_free_sid(). This can avoid a nested loop (up to 65535 * 65535), which may cause a stuck as Ying reported: watchdog: BUG: soft lockup - CPU#23 stuck for 26s! [ksoftirqd/23:136] Call Trace: <TASK> sctp_sched_prio_free_sid+0xab/0x100 [sctp] sctp_stream_free_ext+0x64/0xa0 [sctp] sctp_stream_free+0x31/0x50 [sctp] sctp_association_free+0xa5/0x200 [sctp] Note that it doesn't need to use refcount_t type for this counter, as its accessing is always protected under the sock lock. v1->v2: - add a check in sctp_sched_prio_set to avoid the possible prio_head refcnt overflow.

In the Linux kernel, the following vulnerability has been resolved: USB: Gadget: core: Help prevent panic during UVC unconfigure Avichal Rakesh reported a kernel panic that occurred when the UVC gadget driver was removed from a gadget's configuration. The panic involves a somewhat complicated interaction between the kernel driver and a userspace component (as described in the Link tag below), but the analysis did make one thing clear: The Gadget core should accomodate gadget drivers calling usb_gadget_deactivate() as part of their unbind procedure. Currently this doesn't work. gadget_unbind_driver() calls driver->unbind() while holding the udc->connect_lock mutex, and usb_gadget_deactivate() attempts to acquire that mutex, which will result in a deadlock. The simple fix is for gadget_unbind_driver() to release the mutex when invoking the ->unbind() callback. There is no particular reason for it to be holding the mutex at that time, and the mutex isn't held while the ->bind() callback is invoked. So we'll drop the mutex before performing the unbind callback and reacquire it afterward. We'll also add a couple of comments to usb_gadget_activate() and usb_gadget_deactivate(). Because they run in process context they must not be called from a gadget driver's ->disconnect() callback, which (according to the kerneldoc for struct usb_gadget_driver in include/linux/usb/gadget.h) may run in interrupt context. This may help prevent similar bugs from arising in the future.

In the Linux kernel, the following vulnerability has been resolved: md/raid10: prevent soft lockup while flush writes Currently, there is no limit for raid1/raid10 plugged bio. While flushing writes, raid1 has cond_resched() while raid10 doesn't, and too many writes can cause soft lockup. Follow up soft lockup can be triggered easily with writeback test for raid10 with ramdisks: watchdog: BUG: soft lockup - CPU#10 stuck for 27s! [md0_raid10:1293] Call Trace: <TASK> call_rcu+0x16/0x20 put_object+0x41/0x80 __delete_object+0x50/0x90 delete_object_full+0x2b/0x40 kmemleak_free+0x46/0xa0 slab_free_freelist_hook.constprop.0+0xed/0x1a0 kmem_cache_free+0xfd/0x300 mempool_free_slab+0x1f/0x30 mempool_free+0x3a/0x100 bio_free+0x59/0x80 bio_put+0xcf/0x2c0 free_r10bio+0xbf/0xf0 raid_end_bio_io+0x78/0xb0 one_write_done+0x8a/0xa0 raid10_end_write_request+0x1b4/0x430 bio_endio+0x175/0x320 brd_submit_bio+0x3b9/0x9b7 [brd] __submit_bio+0x69/0xe0 submit_bio_noacct_nocheck+0x1e6/0x5a0 submit_bio_noacct+0x38c/0x7e0 flush_pending_writes+0xf0/0x240 raid10d+0xac/0x1ed0 Fix the problem by adding cond_resched() to raid10 like what raid1 did. Note that unlimited plugged bio still need to be optimized, for example, in the case of lots of dirty pages writeback, this will take lots of memory and io will spend a long time in plug, hence io latency is bad.

In the Linux kernel, the following vulnerability has been resolved: powerpc/imc-pmu: Fix use of mutex in IRQs disabled section Current imc-pmu code triggers a WARNING with CONFIG_DEBUG_ATOMIC_SLEEP and CONFIG_PROVE_LOCKING enabled, while running a thread_imc event. Command to trigger the warning: # perf stat -e thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ sleep 5 Performance counter stats for 'sleep 5': 0 thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ 5.002117947 seconds time elapsed 0.000131000 seconds user 0.001063000 seconds sys Below is snippet of the warning in dmesg: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2869, name: perf-exec preempt_count: 2, expected: 0 4 locks held by perf-exec/2869: #0: c00000004325c540 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: bprm_execve+0x64/0xa90 #1: c00000004325c5d8 (&sig->exec_update_lock){++++}-{3:3}, at: begin_new_exec+0x460/0xef0 #2: c0000003fa99d4e0 (&cpuctx_lock){-...}-{2:2}, at: perf_event_exec+0x290/0x510 #3: c000000017ab8418 (&ctx->lock){....}-{2:2}, at: perf_event_exec+0x29c/0x510 irq event stamp: 4806 hardirqs last enabled at (4805): [<c000000000f65b94>] _raw_spin_unlock_irqrestore+0x94/0xd0 hardirqs last disabled at (4806): [<c0000000003fae44>] perf_event_exec+0x394/0x510 softirqs last enabled at (0): [<c00000000013c404>] copy_process+0xc34/0x1ff0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 36 PID: 2869 Comm: perf-exec Not tainted 6.2.0-rc2-00011-g1247637727f2 #61 Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV Call Trace: dump_stack_lvl+0x98/0xe0 (unreliable) __might_resched+0x2f8/0x310 __mutex_lock+0x6c/0x13f0 thread_imc_event_add+0xf4/0x1b0 event_sched_in+0xe0/0x210 merge_sched_in+0x1f0/0x600 visit_groups_merge.isra.92.constprop.166+0x2bc/0x6c0 ctx_flexible_sched_in+0xcc/0x140 ctx_sched_in+0x20c/0x2a0 ctx_resched+0x104/0x1c0 perf_event_exec+0x340/0x510 begin_new_exec+0x730/0xef0 load_elf_binary+0x3f8/0x1e10 ... do not call blocking ops when !TASK_RUNNING; state=2001 set at [<00000000fd63e7cf>] do_nanosleep+0x60/0x1a0 WARNING: CPU: 36 PID: 2869 at kernel/sched/core.c:9912 __might_sleep+0x9c/0xb0 CPU: 36 PID: 2869 Comm: sleep Tainted: G W 6.2.0-rc2-00011-g1247637727f2 #61 Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV NIP: c000000000194a1c LR: c000000000194a18 CTR: c000000000a78670 REGS: c00000004d2134e0 TRAP: 0700 Tainted: G W (6.2.0-rc2-00011-g1247637727f2) MSR: 9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR: 48002824 XER: 00000000 CFAR: c00000000013fb64 IRQMASK: 1 The above warning triggered because the current imc-pmu code uses mutex lock in interrupt disabled sections. The function mutex_lock() internally calls __might_resched(), which will check if IRQs are disabled and in case IRQs are disabled, it will trigger the warning. Fix the issue by changing the mutex lock to spinlock. [mpe: Fix comments, trim oops in change log, add reported-by tags]

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid deadlock in fs reclaim with page writeback Ext4 has a filesystem wide lock protecting ext4_writepages() calls to avoid races with switching of journalled data flag or inode format. This lock can however cause a deadlock like: CPU0 CPU1 ext4_writepages() percpu_down_read(sbi->s_writepages_rwsem); ext4_change_inode_journal_flag() percpu_down_write(sbi->s_writepages_rwsem); - blocks, all readers block from now on ext4_do_writepages() ext4_init_io_end() kmem_cache_zalloc(io_end_cachep, GFP_KERNEL) fs_reclaim frees dentry... dentry_unlink_inode() iput() - last ref => iput_final() - inode dirty => write_inode_now()... ext4_writepages() tries to acquire sbi->s_writepages_rwsem and blocks forever Make sure we cannot recurse into filesystem reclaim from writeback code to avoid the deadlock.

In the Linux kernel, the following vulnerability has been resolved: mm/swapfile: add cond_resched() in get_swap_pages() The softlockup still occurs in get_swap_pages() under memory pressure. 64 CPU cores, 64GB memory, and 28 zram devices, the disksize of each zram device is 50MB with same priority as si. Use the stress-ng tool to increase memory pressure, causing the system to oom frequently. The plist_for_each_entry_safe() loops in get_swap_pages() could reach tens of thousands of times to find available space (extreme case: cond_resched() is not called in scan_swap_map_slots()). Let's add cond_resched() into get_swap_pages() when failed to find available space to avoid softlockup.

In the Linux kernel, the following vulnerability has been resolved: ptdma: pt_core_execute_cmd() should use spinlock The interrupt handler (pt_core_irq_handler()) of the ptdma driver can be called from interrupt context. The code flow in this function can lead down to pt_core_execute_cmd() which will attempt to grab a mutex, which is not appropriate in interrupt context and ultimately leads to a kernel panic. The fix here changes this mutex to a spinlock, which has been verified to resolve the issue.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: don't let userspace block driver unbind In the unbind callback for f_uac1 and f_uac2, a call to snd_card_free() via g_audio_cleanup() will disconnect the card and then wait for all resources to be released, which happens when the refcount falls to zero. Since userspace can keep the refcount incremented by not closing the relevant file descriptor, the call to unbind may block indefinitely. This can cause a deadlock during reboot, as evidenced by the following blocked task observed on my machine: task:reboot state:D stack:0 pid:2827 ppid:569 flags:0x0000000c Call trace: __switch_to+0xc8/0x140 __schedule+0x2f0/0x7c0 schedule+0x60/0xd0 schedule_timeout+0x180/0x1d4 wait_for_completion+0x78/0x180 snd_card_free+0x90/0xa0 g_audio_cleanup+0x2c/0x64 afunc_unbind+0x28/0x60 ... kernel_restart+0x4c/0xac __do_sys_reboot+0xcc/0x1ec __arm64_sys_reboot+0x28/0x30 invoke_syscall+0x4c/0x110 ... The issue can also be observed by opening the card with arecord and then stopping the process through the shell before unbinding: # arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null Recording WAVE '/dev/null' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo ^Z[1]+ Stopped arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null # echo gadget.0 > /sys/bus/gadget/drivers/configfs-gadget/unbind (observe that the unbind command never finishes) Fix the problem by using snd_card_free_when_closed() instead, which will still disconnect the card as desired, but defer the task of freeing the resources to the core once userspace closes its file descriptor.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Avoid use of GFP_KERNEL in atomic context Using GFP_KERNEL in preemption disable context, causing below warning when CONFIG_DEBUG_ATOMIC_SLEEP is enabled. [ 32.542271] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 [ 32.550883] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 [ 32.558707] preempt_count: 1, expected: 0 [ 32.562710] RCU nest depth: 0, expected: 0 [ 32.566800] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc2-00269-gae9dcb91c606 #7 [ 32.576188] Hardware name: Marvell CN106XX board (DT) [ 32.581232] Call trace: [ 32.583670] dump_backtrace.part.0+0xe0/0xf0 [ 32.587937] show_stack+0x18/0x30 [ 32.591245] dump_stack_lvl+0x68/0x84 [ 32.594900] dump_stack+0x18/0x34 [ 32.598206] __might_resched+0x12c/0x160 [ 32.602122] __might_sleep+0x48/0xa0 [ 32.605689] __kmem_cache_alloc_node+0x2b8/0x2e0 [ 32.610301] __kmalloc+0x58/0x190 [ 32.613610] otx2_sq_aura_pool_init+0x1a8/0x314 [ 32.618134] otx2_open+0x1d4/0x9d0 To avoid use of GFP_ATOMIC for memory allocation, disable preemption after all memory allocation is done.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix deadlock in tc route query code Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ #1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> #1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: enetc: avoid deadlock in enetc_tx_onestep_tstamp() This lockdep splat says it better than I could: ================================ WARNING: inconsistent lock state 6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0 {IN-SOFTIRQ-W} state was registered at: _raw_spin_lock+0x5c/0xc0 sch_direct_xmit+0x148/0x37c __dev_queue_xmit+0x528/0x111c ip6_finish_output2+0x5ec/0xb7c ip6_finish_output+0x240/0x3f0 ip6_output+0x78/0x360 ndisc_send_skb+0x33c/0x85c ndisc_send_rs+0x54/0x12c addrconf_rs_timer+0x154/0x260 call_timer_fn+0xb8/0x3a0 __run_timers.part.0+0x214/0x26c run_timer_softirq+0x3c/0x74 __do_softirq+0x14c/0x5d8 ____do_softirq+0x10/0x20 call_on_irq_stack+0x2c/0x5c do_softirq_own_stack+0x1c/0x30 __irq_exit_rcu+0x168/0x1a0 irq_exit_rcu+0x10/0x40 el1_interrupt+0x38/0x64 irq event stamp: 7825 hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130 hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8 softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8 softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(_xmit_ETHER#2); <Interrupt> lock(_xmit_ETHER#2); *** DEADLOCK *** 3 locks held by kworker/1:3/179: #0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34 Workqueue: events enetc_tx_onestep_tstamp Call trace: print_usage_bug.part.0+0x208/0x22c mark_lock+0x7f0/0x8b0 __lock_acquire+0x7c4/0x1ce0 lock_acquire.part.0+0xe0/0x220 lock_acquire+0x68/0x84 _raw_spin_lock+0x5c/0xc0 netif_freeze_queues+0x5c/0xc0 netif_tx_lock+0x24/0x34 enetc_tx_onestep_tstamp+0x20/0x100 process_one_work+0x28c/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x11c but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in process context, therefore with softirqs enabled (i.o.w., it can be interrupted by a softirq). If we hold the netif_tx_lock() when there is an interrupt, and the NET_TX softirq then gets scheduled, this will take the netif_tx_lock() a second time and deadlock the kernel. To solve this, use netif_tx_lock_bh(), which blocks softirqs from running.

In the Linux kernel, the following vulnerability has been resolved: io_uring: lock overflowing for IOPOLL syzbot reports an issue with overflow filling for IOPOLL: WARNING: CPU: 0 PID: 28 at io_uring/io_uring.c:734 io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734 CPU: 0 PID: 28 Comm: kworker/u4:1 Not tainted 6.2.0-rc3-syzkaller-16369-g358a161a6a9e #0 Workqueue: events_unbound io_ring_exit_work Call trace:  io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734  io_req_cqe_overflow+0x5c/0x70 io_uring/io_uring.c:773  io_fill_cqe_req io_uring/io_uring.h:168 [inline]  io_do_iopoll+0x474/0x62c io_uring/rw.c:1065  io_iopoll_try_reap_events+0x6c/0x108 io_uring/io_uring.c:1513  io_uring_try_cancel_requests+0x13c/0x258 io_uring/io_uring.c:3056  io_ring_exit_work+0xec/0x390 io_uring/io_uring.c:2869  process_one_work+0x2d8/0x504 kernel/workqueue.c:2289  worker_thread+0x340/0x610 kernel/workqueue.c:2436  kthread+0x12c/0x158 kernel/kthread.c:376  ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:863 There is no real problem for normal IOPOLL as flush is also called with uring_lock taken, but it's getting more complicated for IOPOLL|SQPOLL, for which __io_cqring_overflow_flush() happens from the CQ waiting path.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-mem2mem: add lock to protect parameter num_rdy Getting below error when using KCSAN to check the driver. Adding lock to protect parameter num_rdy when getting the value with function: v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready. kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue kworker/u16:3: [name:report&] kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7: kworker/u16:3:  v4l2_m2m_buf_queue+0xd8/0x10c

In the Linux kernel, the following vulnerability has been resolved: drm: Don't unref the same fb many times by mistake due to deadlock handling If we get a deadlock after the fb lookup in drm_mode_page_flip_ioctl() we proceed to unref the fb and then retry the whole thing from the top. But we forget to reset the fb pointer back to NULL, and so if we then get another error during the retry, before the fb lookup, we proceed the unref the same fb again without having gotten another reference. The end result is that the fb will (eventually) end up being freed while it's still in use. Reset fb to NULL once we've unreffed it to avoid doing it again until we've done another fb lookup. This turned out to be pretty easy to hit on a DG2 when doing async flips (and CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y). The first symptom I saw that drm_closefb() simply got stuck in a busy loop while walking the framebuffer list. Fortunately I was able to convince it to oops instead, and from there it was easier to track down the culprit.

In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: restart beacon queue when hardware reset When a hardware reset is triggered, all registers are reset, so all queues are forced to stop in hardware interface. However, mac80211 will not automatically stop the queue. If we don't manually stop the beacon queue, the queue will be deadlocked and unable to start again. This patch fixes the issue where Apple devices cannot connect to the AP after calling ieee80211_restart_hw().

In the Linux kernel, the following vulnerability has been resolved: PM: sleep: Fix possible deadlocks in core system-wide PM code It is reported that in low-memory situations the system-wide resume core code deadlocks, because async_schedule_dev() executes its argument function synchronously if it cannot allocate memory (and not only in that case) and that function attempts to acquire a mutex that is already held. Executing the argument function synchronously from within dpm_async_fn() may also be problematic for ordering reasons (it may cause a consumer device's resume callback to be invoked before a requisite supplier device's one, for example). Address this by changing the code in question to use async_schedule_dev_nocall() for scheduling the asynchronous execution of device suspend and resume functions and to directly run them synchronously if async_schedule_dev_nocall() returns false.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix lock dependency warning with srcu ====================================================== WARNING: possible circular locking dependency detected 6.5.0-kfd-yangp #2289 Not tainted ------------------------------------------------------ kworker/0:2/996 is trying to acquire lock: (srcu){.+.+}-{0:0}, at: __synchronize_srcu+0x5/0x1a0 but task is already holding lock: ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}, at: process_one_work+0x211/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}: __flush_work+0x88/0x4f0 svm_range_list_lock_and_flush_work+0x3d/0x110 [amdgpu] svm_range_set_attr+0xd6/0x14c0 [amdgpu] kfd_ioctl+0x1d1/0x630 [amdgpu] __x64_sys_ioctl+0x88/0xc0 -> #2 (&info->lock#2){+.+.}-{3:3}: __mutex_lock+0x99/0xc70 amdgpu_amdkfd_gpuvm_restore_process_bos+0x54/0x740 [amdgpu] restore_process_helper+0x22/0x80 [amdgpu] restore_process_worker+0x2d/0xa0 [amdgpu] process_one_work+0x29b/0x560 worker_thread+0x3d/0x3d0 -> #1 ((work_completion)(&(&process->restore_work)->work)){+.+.}-{0:0}: __flush_work+0x88/0x4f0 __cancel_work_timer+0x12c/0x1c0 kfd_process_notifier_release_internal+0x37/0x1f0 [amdgpu] __mmu_notifier_release+0xad/0x240 exit_mmap+0x6a/0x3a0 mmput+0x6a/0x120 do_exit+0x322/0xb90 do_group_exit+0x37/0xa0 __x64_sys_exit_group+0x18/0x20 do_syscall_64+0x38/0x80 -> #0 (srcu){.+.+}-{0:0}: __lock_acquire+0x1521/0x2510 lock_sync+0x5f/0x90 __synchronize_srcu+0x4f/0x1a0 __mmu_notifier_release+0x128/0x240 exit_mmap+0x6a/0x3a0 mmput+0x6a/0x120 svm_range_deferred_list_work+0x19f/0x350 [amdgpu] process_one_work+0x29b/0x560 worker_thread+0x3d/0x3d0 other info that might help us debug this: Chain exists of: srcu --> &info->lock#2 --> (work_completion)(&svms->deferred_list_work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&svms->deferred_list_work)); lock(&info->lock#2); lock((work_completion)(&svms->deferred_list_work)); sync(srcu);

In the Linux kernel, the following vulnerability has been resolved: dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock __dma_entry_alloc_check_leak() calls into printk -> serial console output (qcom geni) and grabs port->lock under free_entries_lock spin lock, which is a reverse locking dependency chain as qcom_geni IRQ handler can call into dma-debug code and grab free_entries_lock under port->lock. Move __dma_entry_alloc_check_leak() call out of free_entries_lock scope so that we don't acquire serial console's port->lock under it. Trimmed-down lockdep splat: The existing dependency chain (in reverse order) is: -> #2 (free_entries_lock){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 dma_entry_alloc+0x38/0x110 debug_dma_map_page+0x60/0xf8 dma_map_page_attrs+0x1e0/0x230 dma_map_single_attrs.constprop.0+0x6c/0xc8 geni_se_rx_dma_prep+0x40/0xcc qcom_geni_serial_isr+0x310/0x510 __handle_irq_event_percpu+0x110/0x244 handle_irq_event_percpu+0x20/0x54 handle_irq_event+0x50/0x88 handle_fasteoi_irq+0xa4/0xcc handle_irq_desc+0x28/0x40 generic_handle_domain_irq+0x24/0x30 gic_handle_irq+0xc4/0x148 do_interrupt_handler+0xa4/0xb0 el1_interrupt+0x34/0x64 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x64/0x68 arch_local_irq_enable+0x4/0x8 ____do_softirq+0x18/0x24 ... -> #1 (&port_lock_key){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 qcom_geni_serial_console_write+0x184/0x1dc console_flush_all+0x344/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 register_console+0x230/0x38c uart_add_one_port+0x338/0x494 qcom_geni_serial_probe+0x390/0x424 platform_probe+0x70/0xc0 really_probe+0x148/0x280 __driver_probe_device+0xfc/0x114 driver_probe_device+0x44/0x100 __device_attach_driver+0x64/0xdc bus_for_each_drv+0xb0/0xd8 __device_attach+0xe4/0x140 device_initial_probe+0x1c/0x28 bus_probe_device+0x44/0xb0 device_add+0x538/0x668 of_device_add+0x44/0x50 of_platform_device_create_pdata+0x94/0xc8 of_platform_bus_create+0x270/0x304 of_platform_populate+0xac/0xc4 devm_of_platform_populate+0x60/0xac geni_se_probe+0x154/0x160 platform_probe+0x70/0xc0 ... -> #0 (console_owner){-...}-{0:0}: __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 dma_entry_alloc+0xb4/0x110 debug_dma_map_sg+0xdc/0x2f8 __dma_map_sg_attrs+0xac/0xe4 dma_map_sgtable+0x30/0x4c get_pages+0x1d4/0x1e4 [msm] msm_gem_pin_pages_locked+0x38/0xac [msm] msm_gem_pin_vma_locked+0x58/0x88 [msm] msm_ioctl_gem_submit+0xde4/0x13ac [msm] drm_ioctl_kernel+0xe0/0x15c drm_ioctl+0x2e8/0x3f4 vfs_ioctl+0x30/0x50 ... Chain exists of: console_owner --> &port_lock_key --> free_entries_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(free_entries_lock); lock(&port_lock_key); lock(free_entries_lock); lock(console_owner); *** DEADLOCK *** Call trace: dump_backtrace+0xb4/0xf0 show_stack+0x20/0x30 dump_stack_lvl+0x60/0x84 dump_stack+0x18/0x24 print_circular_bug+0x1cc/0x234 check_noncircular+0x78/0xac __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 consol ---truncated---

In the Linux kernel, the following vulnerability has been resolved: can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock The following 3 locks would race against each other, causing the deadlock situation in the Syzbot bug report: - j1939_socks_lock - active_session_list_lock - sk_session_queue_lock A reasonable fix is to change j1939_socks_lock to an rwlock, since in the rare situations where a write lock is required for the linked list that j1939_socks_lock is protecting, the code does not attempt to acquire any more locks. This would break the circular lock dependency, where, for example, the current thread already locks j1939_socks_lock and attempts to acquire sk_session_queue_lock, and at the same time, another thread attempts to acquire j1939_socks_lock while holding sk_session_queue_lock. NOTE: This patch along does not fix the unregister_netdevice bug reported by Syzbot; instead, it solves a deadlock situation to prepare for one or more further patches to actually fix the Syzbot bug, which appears to be a reference counting problem within the j1939 codebase. [mkl: remove unrelated newline change]

In the Linux kernel, the following vulnerability has been resolved: ocfs2: Avoid touching renamed directory if parent does not change The VFS will not be locking moved directory if its parent does not change. Change ocfs2 rename code to avoid touching renamed directory if its parent does not change as without locking that can corrupt the filesystem.