OpenEMR is a free and open source electronic health records and medical practice management application. Versions prior to 7.3.0 are vulnerable to Directory Traversal in the Load Code feature. Version 7.3.0 contains a patch for the issue.

OpenEMR is a free and open source electronic health records and medical practice management application. Prior to version 8.0.0, the session expiration check in `library/auth.inc.php` runs only when `skip_timeout_reset` is not present in the request. When `skip_timeout_reset=1` is sent, the entire block that calls `SessionTracker::isSessionExpired()` and forces logout on timeout is skipped. As a result, any request that includes this parameter (e.g. from auto-refresh pages like the Patient Flow Board) never runs the expiration check: expired sessions can continue to access data indefinitely, abandoned workstations stay active, and an attacker with a stolen session cookie can keep sending `skip_timeout_reset=1` to avoid being logged out. Version 8.0.0 fixes the issue.

A Path Traversal in setup.php in OpenEMR < 7.0.0 allows remote unauthenticated users to read arbitrary files by controlling a connection to an attacker-controlled MySQL server.

OpenEMR is a free and open source electronic health records and medical practice management application. An Out-of-Band Server-Side Request Forgery (OOB SSRF) vulnerability was identified in OpenEMR, allowing an attacker to force the server to make unauthorized requests to external or internal resources. this attack does not return a direct response but can be exploited through DNS or HTTP interactions to exfiltrate sensitive information. This vulnerability is fixed in 7.0.3.1.

IBM Verify Gateway (IVG) 1.0.0 and 1.0.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 179478.

An issue has been discovered in GitLab CE/EE affecting all versions before 15.1.6, all versions starting from 15.2 before 15.2.4, all versions starting from 15.3 before 15.3.2. It may be possible for an attacker to guess a user's password by brute force by sending crafted requests to a specific endpoint, even if the victim user has 2FA enabled on their account.

IBM Security Identity Governance and Intelligence 5.2.6 could allow an attacker to enumerate usernames to find valid login credentials which could be used to attempt further attacks against the system. IBM X-Force ID: 175336.

IBM DevOps Plan 3.0.0 through 3.0.5 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials.

In Solstice Pod before 3.3.0 (or Open4.3), the screen key can be enumerated using brute-force attacks via the /lookin/info Solstice Open Control API because there are only 1.7 million possibilities.

An attacker can freely brute force username and password and can takeover any account. An attacker could easily guess user passwords and gain access to user and administrative accounts.

By default, .ZED containers produced by PRIMX ZED! for Windows before Q.2020.3 (ANSSI qualification submission); ZED! for Windows before Q.2021.2 (ANSSI qualification submission); ZONECENTRAL for Windows before Q.2021.2 (ANSSI qualification submission); ZONECENTRAL for Windows before 2023.5; ZEDMAIL for Windows before 2023.5; and ZED! for Windows, Mac, Linux before 2023.5 include an encrypted version of sensitive user information, which could allow an unauthenticated attacker to obtain it via brute force.

Weak password derivation for export in Devolutions Remote Desktop Manager before 2022.1 allows information disclosure via a password brute-force attack. An error caused base64 to be decoded.

Lack of protection against brute force attacks in M-Files Server before 23.12.13205.0 allows an attacker unlimited authentication attempts, potentially compromising targeted M-Files user accounts by guessing passwords.

The SMB server's login mechanism does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

Vikunja is an open-source self-hosted task management platform. Prior to 2.3.0, the TOTP failed-attempt lockout mechanism is non-functional due to a database transaction handling bug. When a TOTP validation fails, the login handler in pkg/routes/api/v1/login.go calls HandleFailedTOTPAuth and then unconditionally rolls back. HandleFailedTOTPAuth in pkg/user/totp.go uses an in-memory counter (key-value store) to track failed attempts. When the counter reaches 10, it calls user.SetStatus(s, StatusAccountLocked) on the same database session s. Because the login handler always rolls back after a TOTP failure, the StatusAccountLocked write is undone. The in-memory counter correctly increments past 10, so the lockout code executes on every subsequent attempt, but the database write is rolled back every time. This allows unlimited brute-force attempts against TOTP codes. This vulnerability is fixed in 2.3.0.

A vulnerability has been identified in Desigo DXR2 (All versions < V01.21.142.5-22), Desigo PXC3 (All versions < V01.21.142.4-18), Desigo PXC4 (All versions < V02.20.142.10-10884), Desigo PXC5 (All versions < V02.20.142.10-10884). The login functionality of the application does not employ any countermeasures against Password Spraying attacks or Credential Stuffing attacks. An attacker could obtain a list of valid usernames on the device by exploiting the issue and then perform a precise Password Spraying or Credential Stuffing attack in order to obtain access to at least one account.

IBM Security Verify Identity Manager 10.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 224918.

IBM PowerSC 1.3, 2.0, and 2.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 275107.

Missing Rate Limiting in Web Applications operating on Business-DNA Solutions GmbH’s TopEase® Platform Version <= 7.1.27 on the Login Form allows an unauthenticated remote attacker to perform multiple login attempts, which facilitates gaining privileges.

Lack of rate limiting in M-Files Server and M-Files Web products with versions before 21.12.10873.0 in certain type of user accounts allows unlimited amount of attempts and therefore makes brute-forcing login accounts easier.

A lack of rate limiting in Elenos ETG150 FM transmitter v3.12 allows attackers to obtain user credentials via brute force and cause other unspecified impacts.

IBM Sterling Connect:Direct Web Services 1.0 and 6.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 209507.

The maxView Storage Manager does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

OpenStack Keystone 10.x through 16.x before 16.0.2, 17.x before 17.0.1, 18.x before 18.0.1, and 19.x before 19.0.1 allows information disclosure during account locking (related to PCI DSS features). By guessing the name of an account and failing to authenticate multiple times, any unauthenticated actor could both confirm the account exists and obtain that account's corresponding UUID, which might be leveraged for other unrelated attacks. All deployments enabling security_compliance.lockout_failure_attempts are affected.

firefly-iii is vulnerable to Improper Restriction of Excessive Authentication Attempts

Nextcloud Server is a Nextcloud package that handles data storage. In versions prior to 19.0.13, 20.011, and 21.0.3, there was a lack of ratelimiting on the public DAV endpoint. This may have allowed an attacker to enumerate potentially valid share tokens or credentials. The issue was fixed in versions 19.0.13, 20.0.11, and 21.0.3. There are no known workarounds.

In Discourse 2.7.0 through beta1, a rate-limit bypass leads to a bypass of the 2FA requirement for certain forms.

Eaton Intelligent Power Protector (IPP) software allows repeated authentication attempts against the web interface login page due to insufficient rate‑limiting controls. This security issue has been fixed in the latest version of Eaton IPP which is available on the Eaton download centre.

The Web UI component of Mitel MiVoice 6800 and 6900 series SIP Phones with firmware before 5.1.0.SP5 could allow an unauthenticated attacker to expose sensitive information due to improper memory handling during failed login attempts.

CA eHealth Performance Manager through 6.3.2.12 is affected by Improper Restriction of Excessive Authentication Attempts. An attacker is able to perform an arbitrary number of /web/frames/ authentication attempts using different passwords, and eventually gain access to a targeted account, NOTE: This vulnerability only affects products that are no longer supported by the maintainer

An issue was discovered in Stormshield SNS through 4.2.1. A brute-force attack can occur.

HCL BigFix Mobile / Modern Client Management Admin and Config UI passwords can be brute-forced. User should be locked out for multiple invalid attempts.

Improper Restriction of Excessive Authentication Attempts vulnerability in Mia Technology Inc. Mia-Med Health Aplication allows Interface Manipulation.This issue affects Mia-Med Health Aplication: before 1.0.14.

Flask-AppBuilder versions before 4.3.0 lack rate limiting which can allow an attacker to brute-force user credentials. Version 4.3.0 includes the ability to enable rate limiting using `AUTH_RATE_LIMITED = True`, `RATELIMIT_ENABLED = True`, and setting an `AUTH_RATE_LIMIT`.

An issue was discovered on Samsung mobile devices with P(9.0) and Q(10.0) (with TEEGRIS) software. Attackers can determine user credentials via a brute-force attack against the Gatekeeper trustlet. The Samsung ID is SVE-2020-16908 (May 2020).

A CWE-307 Improper Restriction of Excessive Authentication Attempts vulnerability exists that could allow an attacker to gain unauthorized access to the charging station web interface by performing brute force attacks. Affected Products: EVlink City EVC1S22P4 / EVC1S7P4 (All versions prior to R8 V3.4.0.2 ), EVlink Parking EVW2 / EVF2 / EVP2PE (All versions prior to R8 V3.4.0.2), and EVlink Smart Wallbox EVB1A (All versions prior to R8 V3.4.0.2)

An attacker can decrypt the Ovarro TBox login password by communication capture and brute force attacks.

VMware Workspace ONE Access and Identity Manager, unintentionally provide a login interface on port 7443. A malicious actor with network access to port 7443 may attempt user enumeration or brute force the login endpoint, which may or may not be practical based on lockout policy configuration and password complexity for the target account.

IBM Guardium Data Encryption (GDE) 4.0.0.4 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 196217.

IBM Security Guardium 11.2 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 196314.

The Telnet service for Polycom ViewStation before 7.2.4 does not restrict the number of failed login attempts, which makes it easier for remote attackers to guess usernames and passwords via a brute force attack.

In Solstice Pod before 3.3.0 (or Open4.3), the Administrator password can be enumerated using brute-force attacks via the /Config/service/initModel?password= Solstice Open Control API because there is no complexity requirement (e.g., it might be all digits or all lowercase letters).

IBM Concert Software 1.0.5 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials.

IBM Informix Dynamic Server 12.10 and 14.10 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials.

Improper Restriction of Excessive Authentication Attempts vulnerability exists in all hardware versions of spaceLYnk and Wiser for KNX (formerly homeLYnk) which could allow an attacker to guess a password when brute force is used.

blueprintUE is a tool to help Unreal Engine developers. Prior to 4.2.0, the login form handler performs no throttling of any kind. Failed authentication attempts are processed at full network speed with no IP-based rate limiting, no per-account attempt counter, no temporary lockout, no progressive delay (Tarpit), and no CAPTCHA challenge. An attacker can submit an unlimited number of credential guesses. The password policy (10+ characters, mixed case, digit, special character) reduces the effective keyspace but does not prevent dictionary attacks, credential stuffing from breached databases, or targeted attacks against known users with predictable passwords. This vulnerability is fixed in 4.2.0.

IBM Security Guardium Big Data Intelligence 4.0 (SonarG) uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 161036.

U-SPEED N300 router V1.0.0 does not implement rate limiting or account lockout protections on the /api/login endpoint. This allows an attacker on the local network to perform unlimited authentication attempts, enabling brute-force attacks against the administrator account and potential unauthorized access to the router management interface.

A vulnerability has been identified in SINEC Traffic Analyzer (6GK8822-1BG01-0BA0) (All versions < V2.0). The affected application do not properly enforce restriction of excessive authentication attempts. This could allow an unauthenticated attacker to conduct brute force attacks against legitimate user credentials or keys.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.2 SP1). The affected application does not properly implement brute force protection against user credentials in its Client Communication component. This could allow an attacker to learn user credentials that are vulnerable to brute force attacks.