Assertion reachable with repeated LL_FEATURE_REQ. Zephyr versions >= v2.5.0 contain Reachable Assertion (CWE-617). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-7548-5m6f-mqv9

No proper validation of the length of user input in http_server_get_content_type_from_extension.

Type Confusion in 802154 ACK Frames Handling. Zephyr versions >= v2.4.0 contain NULL Pointer Dereference (CWE-476). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-27r3-rxch-2hm7

Zephyr OS IP packet handling does not properly drop IP packets arriving on an external interface with a source address equal to 127.0.01 or the destination address.

Zephyr JSON decoder incorrectly decodes array of array. Zephyr versions >= >1.14.0, >= >2.5.0 contain Attempt to Access Child of a Non-structure Pointer (CWE-588). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-289f-7mw3-2qf4

Truncated L2CAP K-frame causes assertion failure. Zephyr versions >= 2.4.0, >= v.2.50 contain Improper Handling of Length Parameter Inconsistency (CWE-130), Reachable Assertion (CWE-617). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fx88-6c29-vrp3

Assertion reachable with repeated LL_CONNECTION_PARAM_REQ. Zephyr versions >= v1.14 contain Reachable Assertion (CWE-617). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-46h3-hjcq-2jjr

Disconnecting L2CAP channel right after invalid ATT request leads freeze. Zephyr versions >= 2.4.0, >= 2.5.0 contain Use After Free (CWE-416). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-7g38-3x9v-v7vp

Invalid interval in CONNECT_IND leads to Division by Zero. Zephyr versions >= v1.14.0 Divide By Zero (CWE-369). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-7364-p4wc-8mj4

Zephyr's Bluetooth Classic Hands-Free Profile (HFP) Hands-Free role parser (subsys/bluetooth/host/classic/hfp_hf.c) contains an out-of-bounds write. During Service Level Connection setup the HF sends AT+CIND=? and parses the AG's +CIND: response in cind_handle(), which assigns a per-entry counter index and calls cind_handle_values() for each list element. cind_handle_values() then wrote hf->ind_table[index] = i without verifying that index is within the 20-element int8_t ind_table[] array of struct bt_hfp_hf. Because the parser places no cap on the number of +CIND: list entries, a remote Attendant Gateway (a malicious, compromised, or spoofed peer the device connects to over Bluetooth) can send a response with more than 20 recognized indicator entries and drive index arbitrarily large, writing a small attacker-positioned value past the array into adjacent struct fields (feature masks, SDP/version state, the calls[] array, work/atomic bookkeeping) and potentially beyond the static connection pool slot. This yields memory corruption and at least denial of service of the Bluetooth host, triggered by a single malformed AT response with no user interaction. The sibling consumer ag_indicator_handle_values() already performed the equivalent bounds check; this commit adds the same index >= ARRAY_SIZE(hf->ind_table) guard to close the gap. Affects builds with CONFIG_BT_HFP_HF enabled; introduced with the original HFP HF CIND parser (~v1.7) and present through v4.4.0.

Zephyr's IPv6 Neighbor Discovery send paths (net_ipv6_send_na, net_ipv6_send_ns, net_ipv6_send_rs in subsys/net/ip/ipv6_nbr.c) updated the per-interface ICMP-sent statistics by calling net_pkt_iface(pkt) after net_send_data(pkt) had already returned successfully. On the success path the network stack owns and releases the packet's reference (the L2/driver send unrefs it, e.g. ethernet_send -> net_pkt_unref), so for a freshly allocated packet with refcount 1 the net_pkt slab block can be freed before the statistics line runs (synchronously when no TX queue thread is configured, or via a concurrent TX thread otherwise). The subsequent net_pkt_iface(pkt) reads pkt->iface from the freed slab block, and with CONFIG_NET_STATISTICS_PER_INTERFACE enabled that loaded pointer is dereferenced to increment iface->stats.icmp.sent, a use-after-free (CWE-416). If the slab block was reallocated in the meantime the read/increment targets unrelated or attacker-influenced memory, yielding corrupted statistics, a fault/crash (denial of service), or potential limited memory corruption. The vulnerable Neighbor Advertisement path is reachable by any unauthenticated on-link node simply by sending ICMPv6 Neighbor Solicitations to a Zephyr node with native IPv6 enabled (handle_ns_input -> net_ipv6_send_na). Affected from v3.3.0 through v4.4.0; the fix uses the already-available iface argument instead of touching the sent packet. Configurations without per-interface statistics dereference only a global counter and are not affected by the memory-safety aspect.

A remote adversary with the ability to send arbitrary CoAP packets to be parsed by Zephyr is able to cause a denial of service. This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions.

A vulnerability was identified in the handling of Bluetooth Low Energy (BLE) fixed channels (such as SMP or ATT). Specifically, an attacker could exploit a flaw that causes the BLE target (i.e., the device under attack) to attempt to disconnect a fixed channel, which is not allowed per the Bluetooth specification. This leads to undefined behavior, including potential assertion failures, crashes, or memory corruption, depending on the BLE stack implementation.

No proper validation of the length of user input in olcp_ind_handler in zephyr/subsys/bluetooth/services/ots/ots_client.c.

Zephyr's IPv6 network stack can be prevented from receiving or processing future incoming packets by sending a small number of maliciously fragmented IPv6 packets. When such a packet is handled by the fragment-header processing path, the associated RX network packet buffer (allocated from a memory slab) is not released back to the pool. Repeating the malicious packet exhausts all RX buffer slots, after which the device can no longer obtain RX buffers and stops receiving traffic, resulting in a denial of service.

A denial-of-service issue in the dns implemenation could cause an infinite loop.

A missing nullptr-check in handle_ra_input can cause a nullptr-deref.

subsys/net/ip/ipv6_mld.c:mld_send() read the packet interface via net_pkt_iface(pkt) after net_send_data(pkt) returned successfully. Per the network stack's ownership contract (include/zephyr/net/net_core.h, and the explicit warning in subsys/net/ip/net_core.c:453-460 'do not use pkt after that call'), a successful send transfers ownership of the net_pkt and the L2 driver frees it (e.g. ethernet_send() unrefs the packet on success, subsys/net/l2/ethernet/ethernet.c:790), returning it to its k_mem_slab. The subsequent net_pkt_iface(pkt) is therefore a read of a freed object; the recovered interface pointer is then dereferenced and incremented by the per-interface statistics path (net_stats.h UPDATE_STAT/SET_STAT) when CONFIG_NET_STATISTICS_PER_INTERFACE is enabled. If the freed slot is concurrently reallocated, pkt->iface may read back as NULL (NULL-pointer dereference / crash) or as a stale/garbage pointer (stray increment write / memory corruption). The path is reachable remotely on the local link without authentication: handle_mld_query() (registered for NET_ICMPV6_MLD_QUERY) responds to a valid MLDv2 General Query (unspecified multicast address, hop limit 1) by calling send_mld_report() -> mld_send(). The result is a remotely triggerable denial of service of the networking stack, with a narrow possibility of memory corruption. The fix caches the interface in a local before sending and no longer touches the packet after net_send_data(). The IPv4/IGMP sibling (igmp_send) already used the corrected pattern.

subsys/net/ip/icmpv6.c reads the network interface from a net_pkt after that packet has been handed to net_try_send_data(). In icmpv6_handle_echo_request() and net_icmpv6_send_error(), the post-send statistics update calls net_pkt_iface(reply)/net_pkt_iface(pkt) on the just-sent packet. The send path (net_try_send_data -> net_if_tx) unreferences and may free the packet back to its memory slab before returning — synchronously in the RX thread when no TX queue is configured (CONFIG_NET_TC_TX_COUNT == 0), and asynchronously the driver/L2 may already have freed it otherwise. net_pkt_iface() therefore dereferences a freed (and possibly reused) net_pkt; with CONFIG_NET_STATISTICS_PER_INTERFACE the stale iface pointer is further dereferenced and written through (iface->stats.icmp.sent++), turning the use-after-free read into a write through an attacker-influenceable pointer. The core stack already documents this hazard in net_core.c ("do not use pkt after that call") and caches iface before sending; the ICMPv6 callers did not. An unauthenticated remote attacker triggers the flaw simply by sending an ICMPv6 Echo Request (ping) or an IPv6 packet that elicits an ICMPv6 error (unknown next header, fragment reassembly timeout, destination unreachable), leading to denial of service via crash and potential memory corruption. Affected: Zephyr networking with CONFIG_NET_NATIVE_IPV6, roughly v4.2.0 through v4.4.0. The fix caches the interface pointer before sending and uses it for all statistics updates; the sibling commit 86e21665d46 fixes the identical bug in ICMPv4.

The denial-of-service can be triggered by transmitting a carefully crafted CAN frame on the same CAN network as the vulnerable node. The frame must have a CAN ID matching an installed filter in the vulnerable node (this can easily be guessed based on CAN traffic analyses). The frame must contain the opposite RTR bit as what the filter installed in the vulnerable node contains (if the filter matches RTR frames, the frame must be a data frame or vice versa).

Invalid channel map in CONNECT_IND results to Deadlock. Zephyr versions >= v2.5.0 Improper Check or Handling of Exceptional Conditions (CWE-703). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3c2f-w4v6-qxrp

Lack of proper validation in HCI Host stack initialization can cause a crash of the bluetooth stack

A malicious / defect bluetooth controller can cause a Denial of Service due to unchecked input in le_read_buffer_size_complete.

Improper handling of malformed Connection Request with the interval set to be 1 (which supposed to be illegal) and the chM 0x7CFFFFFFFF triggers a crash. The peripheral will not be connectable after it.

badmonkey, a Security Researcher has found a flaw that allows for a unauthenticated DoS attack on the camera. An attacker runs a crafted URL, nobody can access the web management page of the camera. and must manually restart the device or re-power it. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds.

Asterisk is an open source private branch exchange and telephony toolkit. In Asterisk prior to versions 18.20.1, 20.5.1, and 21.0.1; as well as certified-asterisk prior to 18.9-cert6; Asterisk is susceptible to a DoS due to a race condition in the hello handshake phase of the DTLS protocol when handling DTLS-SRTP for media setup. This attack can be done continuously, thus denying new DTLS-SRTP encrypted calls during the attack. Abuse of this vulnerability may lead to a massive Denial of Service on vulnerable Asterisk servers for calls that rely on DTLS-SRTP. Commit d7d7764cb07c8a1872804321302ef93bf62cba05 contains a fix, which is part of versions 18.20.1, 20.5.1, 21.0.1, amd 18.9-cert6.

A logic issue was addressed with improved checks. This issue is fixed in iOS 18.7.3 and iPadOS 18.7.3, iOS 26.2 and iPadOS 26.2, macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.2, visionOS 26.2, watchOS 26.2. A remote attacker may be able to cause a denial-of-service.

In certain conditions for Calico Typha (v3.26.2, v3.25.1 and below), and Calico Enterprise Typha (v3.17.1, v3.16.3, v3.15.3 and below), a client TLS handshake can block the Calico Typha server indefinitely, resulting in denial of service. The TLS Handshake() call is performed inside the main server handle for loop without any timeout allowing an unclean TLS handshake to block the main loop indefinitely while other connections will be idle waiting for that handshake to finish.

Improper check or handling of exceptional conditions vulnerability affecting Vonets industrial wifi bridge relays and wifi bridge repeaters, software versions 3.3.23.6.9 and prior, enable an unauthenticated remote attacker to cause a denial of service. A specially-crafted HTTP request to pre-authentication resources can crash the service.

BigBlueButton is an open-source virtual classroom. A denial-of-service (DoS) vulnerability in versions prior to 3.0.13 allows any authenticated user to crash the chat functionality for all participants in a meeting by sending a malformed `reactionEmojiId` in the GraphQL mutation `chatSendMessageReaction`. Version 3.0.13 contains a patch. No known workarounds are available.

Unitronics Vision PLC – CWE-703: Improper Check or Handling of Exceptional Conditions may allow denial of service

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. For versions 2.9.0-rc1 through 2.14.19, 3.0.0-rc1 through 3.2.0-rc1, 3.1.6 and 3.0.17, when the webhook.azuredevops.username and webhook.azuredevops.password are not set in the default configuration, the /api/webhook endpoint crashes the entire argocd-server process when it receives an Azure DevOps Push event whose JSON array resource.refUpdates is empty. The slice index [0] is accessed without a length check, causing an index-out-of-range panic. A single unauthenticated HTTP POST is enough to kill the process. This issue is resolved in versions 2.14.20, 3.2.0-rc2, 3.1.8 and 3.0.19.

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Versions 1.2.0 through 1.8.7, 2.0.0-rc1 through 2.14.19, 3.0.0-rc1 through 3.2.0-rc1, 3.1.7 and 3.0.18 are vulnerable to malicious API requests which can crash the API server and cause denial of service to legitimate clients. Without a configured webhook.bitbucketserver.secret, Argo CD's /api/webhook endpoint crashes when receiving a malformed Bitbucket Server payload (non-array repository.links.clone field). A single unauthenticated request triggers CrashLoopBackOff, and targeting all replicas causes complete API outage. This issue is fixed in versions 2.14.20, 3.2.0-rc2, 3.1.8 and 3.0.19.

Omni manages Kubernetes on bare metal, virtual machines, or in a cloud. Prior to 1.1.5 and 1.0.2, there is a nil pointer dereference vulnerability in the Omni Resource Service allows unauthenticated users to cause a server panic and denial of service by sending empty create/update resource requests through the API endpoints. The vulnerability exists in the isSensitiveSpec function which calls grpcomni.CreateResource without checking if the resource's metadata field is nil. When a resource is created with an empty Metadata field, the CreateResource function attempts to access resource.Metadata.Version causing a segmentation fault. This vulnerability is fixed in 1.1.5 and 1.0.2.

An unauthenticated attacker is able to send a special HTTP request, that causes a service to crash. In case of a standalone VRM or BVMS with VRM installation this crash also opens the possibility to send further unauthenticated commands to the service. On some products the interface is only local accessible lowering the CVSS base score. For a list of modified CVSS scores, please see the official Bosch Advisory Appendix chapter Modified CVSS Scores for CVE-2021-23859

A vulnerability in the handling of exceptional conditions in Juniper Networks Junos OS Evolved (EVO) allows an attacker to send specially crafted packets to the device, causing the Advanced Forwarding Toolkit manager (evo-aftmand-bt or evo-aftmand-zx) process to crash and restart, impacting all traffic going through the FPC, resulting in a Denial of Service (DoS). Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. Following messages will be logged prior to the crash: Feb 2 10:14:39 fpc0 evo-aftmand-bt[16263]: [Error] Nexthop: Failed to get fwd nexthop for nexthop:32710470974358 label:1089551617 for session:18 probe:35 Feb 2 10:14:39 fpc0 evo-aftmand-bt[16263]: [Error] Nexthop: Failed to get fwd nexthop for nexthop:19241453497049 label:1089551617 for session:18 probe:37 Feb 2 10:14:39 fpc0 evo-aftmand-bt[16263]: [Error] Nexthop: Failed to get fwd nexthop for nexthop:19241453497049 label:1089551617 for session:18 probe:44 Feb 2 10:14:39 fpc0 evo-aftmand-bt[16263]: [Error] Nexthop: Failed to get fwd nexthop for nexthop:32710470974358 label:1089551617 for session:18 probe:47 Feb 2 10:14:39 fpc0 audit[16263]: ANOM_ABEND auid=4294967295 uid=0 gid=0 ses=4294967295 pid=16263 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=11 Feb 2 10:14:39 fpc0 kernel: audit: type=1701 audit(1612260879.272:17): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=16263 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=1 This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R2-EVO; 21.1 versions prior to 21.1R2-EVO.

A vulnerability in the processing of traffic matching a firewall filter containing a syslog action in Juniper Networks Junos OS on MX Series with MPC10/MPC11 cards installed, PTX10003 and PTX10008 Series devices, will cause the line card to crash and restart, creating a Denial of Service (DoS). Continued receipt and processing of packets matching the firewall filter can create a sustained Denial of Service (DoS) condition. When traffic hits the firewall filter, configured on lo0 or any physical interface on the line card, containing a term with a syslog action (e.g. 'term <name> then syslog'), the affected line card will crash and restart, impacting traffic processing through the ports of the line card. This issue only affects MX Series routers with MPC10 or MPC11 line cards, and PTX10003 or PTX10008 Series packet transport routers. No other platforms or models of line cards are affected by this issue. Note: This issue has also been identified and described in technical service bulletin TSB17931 (login required). This issue affects: Juniper Networks Junos OS on MX Series: 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R3-S2; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2. Juniper Networks Junos OS Evolved on PTX10003, PTX10008: All versions prior to 20.4R2-EVO. This issue does not affect Juniper Networks Junos OS versions prior to 19.3R1.

Fleet is open source device management software. Prior to 4.81.0, a denial-of-service vulnerability in Fleet's gRPC Launcher endpoint allows an authenticated host to crash the entire Fleet server process by sending an unexpected log type value. The server terminates immediately, disrupting all connected hosts, MDM enrollments, and API consumers. Version 4.81.0 patches the issue.

Tenda CP3 V3.0 firmware V31.1.9.91 does not validate the Content-Length header field in RTSP requests (including DESCRIBE, SETUP, and PLAY methods). When a request carrying a Content-Length header is received without a corresponding message body, the RTSP parser enters a persistent body-awaiting state, causing the affected TCP connection to become permanently non-functional. The device does not actively close the connection, resulting in a TCP resource leak. This issue can be exploited by an unauthenticated remote attacker to cause a denial-of-service condition.

Every uncached /avatar/:hash request spawns a goroutine that refreshes the Gravatar image. If the refresh sits in the 10-slot worker queue longer than three seconds, the handler times out and stops listening for the result, so that goroutine blocks forever trying to send on an unbuffered channel. Sustained traffic with random hashes keeps tripping this timeout, so goroutine count grows linearly, eventually exhausting memory and causing Grafana to crash on some systems.

AVEVA PI Server versions 2023 and 2018 SP3 P05 and prior contain a vulnerability that could allow an unauthenticated user to remotely crash the PI Message Subsystem of a PI Server, resulting in a denial-of-service condition.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20187 are related to improper handling of exceptional conditions that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-703.

Netty is a network application framework for development of protocol servers and clients. In netty-codec-haproxy prior to versions 4.1.135.Final and 4.2.15.Final, when decoding a PP2_TYPE_SSL TLV, HAProxyMessage.readNextTLV() first calls `header.retainedSlice(header.readerIndex(), length)` and only then reads the 1-byte client field and 4-byte verify field. If the attacker sets the TLV length below 5, the subsequent readByte/readInt throws IndexOutOfBoundsException. HAProxyMessageDecoder only catches HAProxyProtocolException around this call, so the IOOBE propagates and the retained slice on the pooled cumulation buffer is never released. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

Platform mechanism AutoIP allows remote attackers to reboot the device via a crafted packet in SICK AG solutions Bulkscan LMS111, Bulkscan LMS511, CLV62x – CLV65x, ICR890-3, LMS10x, LMS11x, LMS15x, LMS12x, LMS13x, LMS14x, LMS5xx, LMS53x, MSC800, RFH.

When an attacker sends a specific crafted Ethernet Operation, Administration, and Maintenance (Ethernet OAM) packet to a target device, it may improperly handle the incoming malformed data and fail to sanitize this incoming data resulting in an overflow condition. This overflow condition in Juniper Networks Junos OS allows an attacker to cause a Denial of Service (DoS) condition by coring the CFM daemon. Continued receipt of these packets may cause an extended Denial of Service condition. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S15; 12.3X48 versions prior to 12.3X48-D95 on SRX Series; 14.1X50 versions prior to 14.1X50-D145; 14.1X53 versions prior to 14.1X53-D47; 15.1 versions prior to 15.1R2; 15.1X49 versions prior to 15.1X49-D170 on SRX Series; 15.1X53 versions prior to 15.1X53-D67.

On Juniper Networks Junos OS and Junos OS Evolved devices, the receipt of a specific BGP UPDATE packet causes an internal counter to be incremented incorrectly, which over time can lead to the routing protocols process (RPD) crash and restart. This issue affects both IBGP and EBGP multihop deployment in IPv4 or IPv6 network. This issue affects: Juniper Networks Junos OS: 17.2X75 versions prior to 17.2X75-D105.19; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S4; 18.2X75 versions prior to 18.2X75-D13, 18.2X75-D411.1, 18.2X75-D420.18, 18.2X75-D52.3, 18.2X75-D60; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S2, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2. Juniper Networks Junos OS Evolved: any releases prior to 20.1R2-EVO. This issue does not affect Juniper Networks Junos OS releases prior to 17.3R1.