Netty is a network application framework for development of protocol servers and clients. Prior to version 4.2.15.Final, the default configuration of the `Http3ConnectionHandler` in the Netty HTTP/3 codec lacks an enforced maximum header size limit. When a peer does not explicitly specify `HTTP3_SETTINGS_MAX_FIELD_SECTION_SIZE`, the implementation defaults to an unbounded limit. This insecure default configuration allows a malicious client or server to send an enormous number of headers, leading to a memory exhaustion Denial of Service via an `OutOfMemoryError`. Version 4.2.15.Final contains a patch.
Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SslClientHelloHandler.decode() reads the 24-bit TLS handshake length and, when the ClientHello does not fit in the first record, eagerly allocates `ctx.alloc().buffer(handshakeLength)` (line 161). The guard at line 140 is `handshakeLength > maxClientHelloLength && maxClientHelloLength != 0`, and the commonly-used SniHandler/AbstractSniHandler constructors (SniHandler(Mapping), SniHandler(AsyncMapping), AbstractSniHandler()) pass maxClientHelloLength=0 and handshakeTimeoutMillis=0, so the length guard is disabled and no timeout is scheduled. A 16 MiB request exceeds the default pooled chunk size and becomes a huge/unpooled allocation performed immediately. The buffer is retained in the handler until the channel closes. Versions 4.1.135.Final and 4.2.15.Final patch the issue.
Netty is a network application framework for development of protocol servers and clients. Prior to version 4.2.15.Final, a memory exhaustion vulnerability in the Netty HTTP/3 codec allows the creation of an infinite number of blocked streams, which can cause OOM error. Version 4.2.15.Final patches the issue.
Netty is a network application framework for development of protocol servers and clients. In versions of netty-transport-sctp prior to 4.1.135.Final and 4.2.15.Final, for each non-complete SctpMessage fragment the handler does `fragments.put(streamId, Unpooled.wrappedBuffer(frag, byteBuf))`, wrapping the previous accumulator and the new slice into a *new* CompositeByteBuf every time. After N fragments the accumulator is an N-deep chain of composites, each holding references and component arrays; readableBytes()/getBytes() on the final buffer recurse N levels. There is no limit on N, on total bytes, or on the number of streamIdentifiers an attacker can open (each gets its own map entry). A peer that never sets the `complete` flag can grow this structure indefinitely from tiny 1-byte DATA chunks. Versions 4.1.135.Final and 4.2.15.Final patch the issue.
Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, RedisArrayAggregator pre-allocates ArrayList with initial capacity equal to the RESP array element count declared in an array header. That count is taken from the wire before the corresponding child messages exist. A small malicious header can claim a huge initial capacity. Versions 4.1.135.Final and 4.2.15.Final patch the issue.
Netty is an asynchronous, event-driven network application framework. Prior to versions 4.1.124.Final and 4.2.4.Final, Netty is vulnerable to MadeYouReset DDoS. This is a logical vulnerability in the HTTP/2 protocol, that uses malformed HTTP/2 control frames in order to break the max concurrent streams limit - which results in resource exhaustion and distributed denial of service. This issue has been patched in versions 4.1.124.Final and 4.2.4.Final.
The ZlibDecoders in Netty 4.1.x before 4.1.46 allow for unbounded memory allocation while decoding a ZlibEncoded byte stream. An attacker could send a large ZlibEncoded byte stream to the Netty server, forcing the server to allocate all of its free memory to a single decoder.
Netty is a network application framework for development of protocol servers and clients. In netty-codec-redis prior to versions 4.1.135.Final and 4.2.15.Final, an attacker can cause DoS by sending a crafted Redis payload with deeply nested arrays. This forces the server to allocate a massive number of state objects and collections, leading to memory exhaustion and an OutOfMemoryError. Versions 4.1.135.Final and 4.2.15.Final patch the issue.
Netty is a network application framework for development of protocol servers and clients. In netty-codec-redis prior to versions 4.1.135.Final and 4.2.15.Final, an attacker can cause DoS by sending crafted Redis payloads across multiple connections without `\r\n`. This exhausts the server's direct memory pool (OutOfDirectMemoryError), preventing legitimate connections from being processed. Versions 4.1.135.Final and 4.2.15.Final patch the issue.
Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, the MQTT 5 header Properties section is parsed and buffered before any message size limit is applied. Specifically, in MqttDecoder, the decodeVariableHeader() method is called before the bytesRemainingBeforeVariableHeader > maxBytesInMessage check. The decodeVariableHeader() can call other methods which will call decodeProperties(). Effectively, Netty does not apply any limits to the size of the properties being decoded. Additionally, because MqttDecoder extends ReplayingDecoder, Netty will repeatedly re-parse the enormous Properties sections and buffer the bytes in memory, until the entire thing parses to completion. This can cause high resource usage in both CPU and memory. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final.
Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, Lz4FrameDecoder allocates a ByteBuf of size decompressedLength (up to 32 MB per block) before LZ4 runs. A peer only needs a 21-byte header plus compressedLength payload bytes - 22 bytes if compressedLength == 1 - to force that allocation. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final.
Netty is an asynchronous, event-driven network application framework. From 4.2.0.Final to 4.2.13.Final , Netty's epoll transport fails to detect and close TCP connections that receive a RST after being half-closed, leading to stale channels that are never cleaned up and, in some code paths, a 100% CPU busy-loop in the event loop thread. This vulnerability is fixed in 4.2.13.Final.
Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, HttpContentDecompressor accepts a maxAllocation parameter to limit decompression buffer size and prevent decompression bomb attacks. This limit is correctly enforced for gzip and deflate encodings via ZlibDecoder, but is silently ignored when the content encoding is br (Brotli), zstd, or snappy. An attacker can bypass the configured decompression limit by sending a compressed payload with Content-Encoding: br instead of Content-Encoding: gzip, causing unbounded memory allocation and out-of-memory denial of service. The same vulnerability exists in DelegatingDecompressorFrameListener for HTTP/2 connections. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final.
Netty is an asynchronous, event-driven network application framework. In versions prior to 4.1.132.Final and 4.2.10.Final, a remote user can trigger a Denial of Service (DoS) against a Netty HTTP/2 server by sending a flood of `CONTINUATION` frames. The server's lack of a limit on the number of `CONTINUATION` frames, combined with a bypass of existing size-based mitigations using zero-byte frames, allows an user to cause excessive CPU consumption with minimal bandwidth, rendering the server unresponsive. Versions 4.1.132.Final and 4.2.10.Final fix the issue.
Netty, an asynchronous, event-driven network application framework, has a vulnerability starting in version 4.1.91.Final and prior to version 4.1.118.Final. When a special crafted packet is received via SslHandler it doesn't correctly handle validation of such a packet in all cases which can lead to a native crash. Version 4.1.118.Final contains a patch. As workaround its possible to either disable the usage of the native SSLEngine or change the code manually.
The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.
Netty is an asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. In netty-codec-compression versions 4.1.124.Final and below, and netty-codec versions 4.2.4.Final and below, when supplied with specially crafted input, BrotliDecoder and certain other decompression decoders will allocate a large number of reachable byte buffers, which can lead to denial of service. BrotliDecoder.decompress has no limit in how often it calls pull, decompressing data 64K bytes at a time. The buffers are saved in the output list, and remain reachable until OOM is hit. This is fixed in versions 4.1.125.Final of netty-codec and 4.2.5.Final of netty-codec-compression.
Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final, when decoding header blocks, the non-Huffman branch of io.netty.handler.codec.http3.QpackDecoder#decodeHuffmanEncodedLiteral may execute new byte[length] for a string literal before verifying that length bytes are actually present in the compressed field section. The wire encoding allows a very large length to be expressed in few bytes. There is no check that length <= in.readableBytes() before new byte[length]. This vulnerability is fixed in 4.2.13.Final.
Netty project is an event-driven asynchronous network application framework. In versions prior to 4.1.86.Final, a StackOverflowError can be raised when parsing a malformed crafted message due to an infinite recursion. This issue is patched in version 4.1.86.Final. There is no workaround, except using a custom HaProxyMessageDecoder.
handler/ssl/OpenSslEngine.java in Netty 4.0.x before 4.0.37.Final and 4.1.x before 4.1.1.Final allows remote attackers to cause a denial of service (infinite loop).
The Snappy frame decoder function doesn't restrict the chunk length which may lead to excessive memory usage. Beside this it also may buffer reserved skippable chunks until the whole chunk was received which may lead to excessive memory usage as well. This vulnerability can be triggered by supplying malicious input that decompresses to a very big size (via a network stream or a file) or by sending a huge skippable chunk.
The Bzip2 decompression decoder function doesn't allow setting size restrictions on the decompressed output data (which affects the allocation size used during decompression). All users of Bzip2Decoder are affected. The malicious input can trigger an OOME and so a DoS attack
Every uncached /avatar/:hash request spawns a goroutine that refreshes the Gravatar image. If the refresh sits in the 10-slot worker queue longer than three seconds, the handler times out and stops listening for the result, so that goroutine blocks forever trying to send on an unbuffered channel. Sustained traffic with random hashes keeps tripping this timeout, so goroutine count grows linearly, eventually exhausting memory and causing Grafana to crash on some systems.
Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. For versions 2.9.0-rc1 through 2.14.19, 3.0.0-rc1 through 3.2.0-rc1, 3.1.6 and 3.0.17, when the webhook.azuredevops.username and webhook.azuredevops.password are not set in the default configuration, the /api/webhook endpoint crashes the entire argocd-server process when it receives an Azure DevOps Push event whose JSON array resource.refUpdates is empty. The slice index [0] is accessed without a length check, causing an index-out-of-range panic. A single unauthenticated HTTP POST is enough to kill the process. This issue is resolved in versions 2.14.20, 3.2.0-rc2, 3.1.8 and 3.0.19.
Unitronics Vision PLC – CWE-703: Improper Check or Handling of Exceptional Conditions may allow denial of service
An improper check or handling of exceptional conditions vulnerability [CWE-703] in Fortinet FortiOS version 7.4.1 allows an unauthenticated attacker to provoke a denial of service on the administrative interface via crafted HTTP requests.
A null pointer dereference vulnerability in IPSec component of Ivanti Connect Secure (9.x, 22.x) and Ivanti Policy Secure allows an unauthenticated malicious user to send specially crafted requests in-order-to crash the service thereby causing a DoS attack
A logic issue was addressed with improved checks. This issue is fixed in iOS 18.7.3 and iPadOS 18.7.3, iOS 26.2 and iPadOS 26.2, macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.2, visionOS 26.2, watchOS 26.2. A remote attacker may be able to cause a denial-of-service.
An Improper Check or Handling of Exceptional Conditions vulnerability in the UTM (Unified Threat Management) Web-Filtering feature of Juniper Networks Junos OS on SRX Series causes a jbuf memory leak to occur when accessing certain websites, eventually leading to a Denial of Service (DoS) condition. Service restoration is only possible by rebooting the system. The jbuf memory leak only occurs in SSL Proxy and UTM Web-Filtering configurations. Other products, platforms, and configurations are not affected by this vulnerability. This issue affects Juniper Networks Junos OS on SRX Series: 22.2 versions prior to 22.2R3; 22.3 versions prior to 22.3R2-S1, 22.3R3; 22.4 versions prior to 22.4R1-S2, 22.4R2. This issue does not affect Juniper Networks Junos OS versions prior to 22.2R2.
In wlan, there is a possible denial of service due to incorrect error handling. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08861558; Issue ID: MSV-1526.
Fleet is open source device management software. Prior to 4.81.0, a denial-of-service vulnerability in Fleet's gRPC Launcher endpoint allows an authenticated host to crash the entire Fleet server process by sending an unexpected log type value. The server terminates immediately, disrupting all connected hosts, MDM enrollments, and API consumers. Version 4.81.0 patches the issue.
The SJA1000 CAN controller driver backend automatically attempt to recover from a bus-off event when built with CONFIG_CAN_AUTO_BUS_OFF_RECOVERY=y. This results in calling k_sleep() in IRQ context, causing a fatal exception.
A flaw was found in Nodemailer. This vulnerability allows a denial of service (DoS) via a crafted email address header that triggers infinite recursion in the address parser.
FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.11, when handling DTLS-SRTP for media setup, FreeSWITCH is susceptible to Denial of Service due to a race condition in the hello handshake phase of the DTLS protocol. This attack can be done continuously, thus denying new DTLS-SRTP encrypted calls during the attack. If an attacker manages to send a ClientHello DTLS message with an invalid CipherSuite (such as `TLS_NULL_WITH_NULL_NULL`) to the port on the FreeSWITCH server that is expecting packets from the caller, a DTLS error is generated. This results in the media session being torn down, which is followed by teardown at signaling (SIP) level too. Abuse of this vulnerability may lead to a massive Denial of Service on vulnerable FreeSWITCH servers for calls that rely on DTLS-SRTP. To address this vulnerability, upgrade FreeSWITCH to 1.10.11 which includes the security fix. The solution implemented is to drop all packets from addresses that have not been validated by an ICE check.
Asterisk is an open source private branch exchange and telephony toolkit. In Asterisk prior to versions 18.20.1, 20.5.1, and 21.0.1; as well as certified-asterisk prior to 18.9-cert6; Asterisk is susceptible to a DoS due to a race condition in the hello handshake phase of the DTLS protocol when handling DTLS-SRTP for media setup. This attack can be done continuously, thus denying new DTLS-SRTP encrypted calls during the attack. Abuse of this vulnerability may lead to a massive Denial of Service on vulnerable Asterisk servers for calls that rely on DTLS-SRTP. Commit d7d7764cb07c8a1872804321302ef93bf62cba05 contains a fix, which is part of versions 18.20.1, 20.5.1, 21.0.1, amd 18.9-cert6.
An unauthenticated attacker is able to send a special HTTP request, that causes a service to crash. In case of a standalone VRM or BVMS with VRM installation this crash also opens the possibility to send further unauthenticated commands to the service. On some products the interface is only local accessible lowering the CVSS base score. For a list of modified CVSS scores, please see the official Bosch Advisory Appendix chapter Modified CVSS Scores for CVE-2021-23859
Vault and Vault Enterprise did not properly handle requests originating from unauthorized IP addresses when the TCP listener option, proxy_protocol_behavior, was set to deny_unauthorized. When receiving a request from a source IP address that was not listed in proxy_protocol_authorized_addrs, the Vault API server would shut down and no longer respond to any HTTP requests, potentially resulting in denial of service. While this bug also affected versions of Vault up to 1.17.1 and 1.16.5, a separate regression in those release series did not allow Vault operators to configure the deny_unauthorized option, thus not allowing the conditions for the denial of service to occur. Fixed in Vault and Vault Enterprise 1.17.2, 1.16.6, and 1.15.12.
A vulnerability in the handling of exceptional conditions in Juniper Networks Junos OS Evolved (EVO) allows an attacker to send specially crafted packets to the device, causing the Advanced Forwarding Toolkit manager (evo-aftmand-bt or evo-aftmand-zx) process to crash and restart, impacting all traffic going through the FPC, resulting in a Denial of Service (DoS). Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. Following messages will be logged prior to the crash: Feb 2 10:14:39 fpc0 evo-aftmand-bt[16263]: [Error] Nexthop: Failed to get fwd nexthop for nexthop:32710470974358 label:1089551617 for session:18 probe:35 Feb 2 10:14:39 fpc0 evo-aftmand-bt[16263]: [Error] Nexthop: Failed to get fwd nexthop for nexthop:19241453497049 label:1089551617 for session:18 probe:37 Feb 2 10:14:39 fpc0 evo-aftmand-bt[16263]: [Error] Nexthop: Failed to get fwd nexthop for nexthop:19241453497049 label:1089551617 for session:18 probe:44 Feb 2 10:14:39 fpc0 evo-aftmand-bt[16263]: [Error] Nexthop: Failed to get fwd nexthop for nexthop:32710470974358 label:1089551617 for session:18 probe:47 Feb 2 10:14:39 fpc0 audit[16263]: ANOM_ABEND auid=4294967295 uid=0 gid=0 ses=4294967295 pid=16263 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=11 Feb 2 10:14:39 fpc0 kernel: audit: type=1701 audit(1612260879.272:17): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=16263 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=1 This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R2-EVO; 21.1 versions prior to 21.1R2-EVO.
A vulnerability in the processing of traffic matching a firewall filter containing a syslog action in Juniper Networks Junos OS on MX Series with MPC10/MPC11 cards installed, PTX10003 and PTX10008 Series devices, will cause the line card to crash and restart, creating a Denial of Service (DoS). Continued receipt and processing of packets matching the firewall filter can create a sustained Denial of Service (DoS) condition. When traffic hits the firewall filter, configured on lo0 or any physical interface on the line card, containing a term with a syslog action (e.g. 'term <name> then syslog'), the affected line card will crash and restart, impacting traffic processing through the ports of the line card. This issue only affects MX Series routers with MPC10 or MPC11 line cards, and PTX10003 or PTX10008 Series packet transport routers. No other platforms or models of line cards are affected by this issue. Note: This issue has also been identified and described in technical service bulletin TSB17931 (login required). This issue affects: Juniper Networks Junos OS on MX Series: 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R3-S2; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2. Juniper Networks Junos OS Evolved on PTX10003, PTX10008: All versions prior to 20.4R2-EVO. This issue does not affect Juniper Networks Junos OS versions prior to 19.3R1.
In certain conditions for Calico Typha (v3.26.2, v3.25.1 and below), and Calico Enterprise Typha (v3.17.1, v3.16.3, v3.15.3 and below), a client TLS handshake can block the Calico Typha server indefinitely, resulting in denial of service. The TLS Handshake() call is performed inside the main server handle for loop without any timeout allowing an unclean TLS handshake to block the main loop indefinitely while other connections will be idle waiting for that handshake to finish.
The XINJE XL5E-16T and XD5E-24R-E programmable logic controllers V3.5.3b-V3.7.2a have a vulnerability in handling Modbus messages. When a TCP connection is established with the above series of controllers within a local area network (LAN), sending a specific Modbus message to the controller can cause the PLC to crash, interrupting the normal operation of the programs running in the PLC. This results in the ERR indicator light turning on and the RUN indicator light turning off.
AVEVA PI Server versions 2023 and 2018 SP3 P05 and prior contain a vulnerability that could allow an unauthenticated user to remotely crash the PI Message Subsystem of a PI Server, resulting in a denial-of-service condition.
BigBlueButton is an open-source virtual classroom. A Denial of Service (DoS) vulnerability in versions prior to 3.0.13 allows any authenticated user to freeze or crash the entire server by abusing the polling feature's `Choices` response type. By submitting a malicious payload with a massive array in the `answerIds` field, the attacker can cause the current meeting — and potentially all meetings on the server — to become unresponsive. Version 3.0.13 contains a patch. No known workarounds are available.
BigBlueButton is an open-source virtual classroom. A denial-of-service (DoS) vulnerability in versions prior to 3.0.13 allows any authenticated user to crash the chat functionality for all participants in a meeting by sending a malformed `reactionEmojiId` in the GraphQL mutation `chatSendMessageReaction`. Version 3.0.13 contains a patch. No known workarounds are available.
An improper handling of a malformed API request to an API server in Bosch BT software products can allow an unauthenticated attacker to cause a Denial of Service (DoS) situation.
Omni manages Kubernetes on bare metal, virtual machines, or in a cloud. Prior to 1.1.5 and 1.0.2, there is a nil pointer dereference vulnerability in the Omni Resource Service allows unauthenticated users to cause a server panic and denial of service by sending empty create/update resource requests through the API endpoints. The vulnerability exists in the isSensitiveSpec function which calls grpcomni.CreateResource without checking if the resource's metadata field is nil. When a resource is created with an empty Metadata field, the CreateResource function attempts to access resource.Metadata.Version causing a segmentation fault. This vulnerability is fixed in 1.1.5 and 1.0.2.
An issue was discovered in Snowbridge setups sending data to Google Tag Manager Server Side. It involves attaching an invalid GTM SS preview header to events, causing them to be retried indefinitely. As a result, the performance of forwarding events to GTM SS overall can be affected (latency, throughput).
Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Versions 1.2.0 through 1.8.7, 2.0.0-rc1 through 2.14.19, 3.0.0-rc1 through 3.2.0-rc1, 3.1.7 and 3.0.18 are vulnerable to malicious API requests which can crash the API server and cause denial of service to legitimate clients. Without a configured webhook.bitbucketserver.secret, Argo CD's /api/webhook endpoint crashes when receiving a malformed Bitbucket Server payload (non-array repository.links.clone field). A single unauthenticated request triggers CrashLoopBackOff, and targeting all replicas causes complete API outage. This issue is fixed in versions 2.14.20, 3.2.0-rc2, 3.1.8 and 3.0.19.
An Improper Check or Handling of Exceptional Conditions within the storm control feature of Juniper Networks Junos OS allows an attacker sending a high rate of traffic to cause a Denial of Service. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. Storm control monitors the level of applicable incoming traffic and compares it with the level specified. If the combined level of the applicable traffic exceeds the specified level, the switch drops packets for the controlled traffic types. This issue affects Juniper Networks Junos OS on QFX10002: All versions prior to 19.3R3-S7; 19.4 versions prior to 19.4R3-S11; 20.2 versions prior to 20.2R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2.
An Improper Check or Handling of Exceptional Conditions vulnerability in the IPsec library of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause Denial of Service (DoS). On all MX platforms with MS-MPC or MS-MIC card, when specific IPv4 packets are processed by an IPsec6 tunnel, the Multiservices PIC Management Daemon (mspmand) process will core and restart. This will lead to FPC crash. Traffic flow is impacted while mspmand restarts. Continued receipt of these specific packets will cause a sustained Denial of Service (DoS) condition. This issue only occurs if an IPv4 address is not configured on the multiservice interface. This issue affects: Juniper Networks Junos OS on MX Series All versions prior to 19.4R3-S9; 20.1 version 20.1R3-S5 and later versions; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2-S1, 21.4R3; 22.1 versions prior to 22.1R2.